Commit Graph

1790 Commits

Author SHA1 Message Date
Linus Torvalds e6d69a60b7 Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine changes from Vinod Koul:
 "This brings for slave dmaengine:

   - Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as
     dmaengine can only transfer and not verify validaty of dma
     transfers

   - Bunch of fixes across drivers:

      - cppi41 driver fixes from Daniel

      - 8 channel freescale dma engine support and updated bindings from
        Hongbo

      - msx-dma fixes and cleanup by Markus

   - DMAengine updates from Dan:

      - Bartlomiej and Dan finalized a rework of the dma address unmap
        implementation.

      - In the course of testing 1/ a collection of enhancements to
        dmatest fell out.  Notably basic performance statistics, and
        fixed / enhanced test control through new module parameters
        'run', 'wait', 'noverify', and 'verbose'.  Thanks to Andriy and
        Linus [Walleij] for their review.

      - Testing the raid related corner cases of 1/ triggered bugs in
        the recently added 16-source operation support in the ioatdma
        driver.

      - Some minor fixes / cleanups to mv_xor and ioatdma"

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits)
  dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers
  dma: mv_xor: Remove unneeded NULL address check
  ioat: fix ioat3_irq_reinit
  ioat: kill msix_single_vector support
  raid6test: add new corner case for ioatdma driver
  ioatdma: clean up sed pool kmem_cache
  ioatdma: fix selection of 16 vs 8 source path
  ioatdma: fix sed pool selection
  ioatdma: Fix bug in selftest after removal of DMA_MEMSET.
  dmatest: verbose mode
  dmatest: convert to dmaengine_unmap_data
  dmatest: add a 'wait' parameter
  dmatest: add basic performance metrics
  dmatest: add support for skipping verification and random data setup
  dmatest: use pseudo random numbers
  dmatest: support xor-only, or pq-only channels in tests
  dmatest: restore ability to start test at module load and init
  dmatest: cleanup redundant "dmatest: " prefixes
  dmatest: replace stored results mechanism, with uniform messages
  Revert "dmatest: append verify result to results"
  ...
2013-11-20 13:20:24 -08:00
Vinod Koul df12a3178d Merge commit 'dmaengine-3.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine
Pull dmaengine changes from Dan

1/ Bartlomiej and Dan finalized a rework of the dma address unmap
   implementation.

2/ In the course of testing 1/ a collection of enhancements to dmatest
   fell out.  Notably basic performance statistics, and fixed / enhanced
   test control through new module parameters 'run', 'wait', 'noverify',
   and 'verbose'.  Thanks to Andriy and Linus for their review.

3/ Testing the raid related corner cases of 1/ triggered bugs in the
   recently added 16-source operation support in the ioatdma driver.

4/ Some minor fixes / cleanups to mv_xor and ioatdma.

Conflicts:
	drivers/dma/dmatest.c

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-16 12:02:36 +05:30
Linus Torvalds 9073e1a804 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "Usual earth-shaking, news-breaking, rocket science pile from
  trivial.git"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits)
  doc: usb: Fix typo in Documentation/usb/gadget_configs.txt
  doc: add missing files to timers/00-INDEX
  timekeeping: Fix some trivial typos in comments
  mm: Fix some trivial typos in comments
  irq: Fix some trivial typos in comments
  NUMA: fix typos in Kconfig help text
  mm: update 00-INDEX
  doc: Documentation/DMA-attributes.txt fix typo
  DRM: comment: `halve' -> `half'
  Docs: Kconfig: `devlopers' -> `developers'
  doc: typo on word accounting in kprobes.c in mutliple architectures
  treewide: fix "usefull" typo
  treewide: fix "distingush" typo
  mm/Kconfig: Grammar s/an/a/
  kexec: Typo s/the/then/
  Documentation/kvm: Update cpuid documentation for steal time and pv eoi
  treewide: Fix common typo in "identify"
  __page_to_pfn: Fix typo in comment
  Correct some typos for word frequency
  clk: fixed-factor: Fix a trivial typo
  ...
2013-11-15 16:47:22 -08:00
Ezequiel Garcia 82a1402eae dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers
Despite requesting two memory resources, called 'base' and 'high_base', the
driver uses explicitly only the former. The latter is being used implicitly
by addressing at offset +0x200, which in practice accesses high_base.

In other words, the current driver breaks if the second memory resource
is ever place at an offset different from +0x200.

This patch fixes the above by defining the registers with the offset from
high_base, and use high_base explicitly where appropriate.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:42 -08:00
Ezequiel Garcia a911ddc9a0 dma: mv_xor: Remove unneeded NULL address check
This mmio address is checked at probe-time, which makes this test
redundant. Let's just remove it.

Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:42 -08:00
Dan Williams 779e561ae2 ioat: fix ioat3_irq_reinit
The implementation of ioat3_irq_reinit has two bugs:

1/ The mode is incorrectly set to MSIX for the MSI case

2/ The 'dev_id' parameter to free_irq is the ioatdma_device not the channel in
   the msi and intx case

Include a small cleanup to clarify that ioat3_irq_reinit is only for bwd
hardware

Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:42 -08:00
Dan Williams 4c5d9619e0 ioat: kill msix_single_vector support
Once we have determined that we will not have all of our desired msix
vectors there is no point in attempting a single msix allocation.  The
driver will already need to read registers to determine the source of
the interrupt the fact that it is msix is moot.  Fallback directly to
msi.

Reported-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:42 -08:00
Dan Williams 59056e85d7 ioatdma: clean up sed pool kmem_cache
Use a single cache for all sed allocations.  No need to make it per
channel.  This also avoids the slub_debug warnings for multiple caches
with the same name.

Switching to dmam_pool_create() to fix leaking the dma pools on
initialization failure and lets us kill ioat3_dma_remove().

Cc: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:41 -08:00
Dan Williams 21e96c7313 ioatdma: fix selection of 16 vs 8 source path
When performing continuations there are implied sources that need to be
added to the source count. Quoting dma_set_maxpq:

/* dma_maxpq - reduce maxpq in the face of continued operations
 * @dma - dma device with PQ capability
 * @flags - to check if DMA_PREP_CONTINUE and DMA_PREP_PQ_DISABLE_P are set
 *
 * When an engine does not support native continuation we need 3 extra
 * source slots to reuse P and Q with the following coefficients:
 * 1/ {00} * P : remove P from Q', but use it as a source for P'
 * 2/ {01} * Q : use Q to continue Q' calculation
 * 3/ {00} * Q : subtract Q from P' to cancel (2)
 *
 * In the case where P is disabled we only need 1 extra source:
 * 1/ {01} * Q : use Q to continue Q' calculation
 */

...fix the selection of the 16 source path to take these implied sources
into account.

Note this also kills the BUG_ON(src_cnt < 9) check in
__ioat3_prep_pq16_lock().  Besides not accounting for implied sources
the check is redundant given we already made the path selection.

Cc: <stable@vger.kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:41 -08:00
Dan Williams 5d48b9b5d8 ioatdma: fix sed pool selection
The array to lookup the sed pool based on the number of sources
(pq16_idx_to_sedi) is 16 entries and expects a max source index.
However, we pass the total source count which runs off the end of the
array when src_cnt == 16.  The minimal fix is to just pass src_cnt-1,
but given we know the source count is > 8 we can just calculate the sed
pool by (src_cnt - 2) >> 3.

Cc: Dave Jiang <dave.jiang@intel.com>
Cc: <stable@vger.kernel.org>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:41 -08:00
Dave Jiang ac7d631f7d ioatdma: Fix bug in selftest after removal of DMA_MEMSET.
Commit 48a9db4 (3.11) removed the memset op in the xor selftest for ioatdma.
The issue is that with the removal of that op, it never replaced the memset
with a CPU memset. The memory being operated on is expected to be zeroes but
was not. This is causing the xor selftest to fail.

Cc: <stable@vger.kernel.org>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:41 -08:00
Dan Williams 50137a7df9 dmatest: verbose mode
Verbose mode turns on test success messages, by default we only output
test summaries and failure results.

Also cleaned up some stray quotes, leftover from putting the result
message format string all on one line.

Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:41 -08:00
Dan Williams 4076e755db dmatest: convert to dmaengine_unmap_data
Remove the open coded unmap and add coverage for this core functionality
to dmatest.

Also fixes up a couple places where we leaked dma mappings.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:40 -08:00
Dan Williams 2d88ce76eb dmatest: add a 'wait' parameter
Allows for scripting test runs by module load / unload.  Prevent module
load from returning until 'iterations' (finite) tests have completed, or
cause reads of the 'wait' parameter in sysfs to pause until the tests
are done.

Also killed the local waitqueue since we can just let the thread exit
naturally as long as we hold a reference.

Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:40 -08:00
Dan Williams 86727443a0 dmatest: add basic performance metrics
Add iops and throughput to the summary output.

Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:40 -08:00
Dan Williams e3b9c34731 dmatest: add support for skipping verification and random data setup
Towards enabling dmatest to checkout performance add a 'noverify' mode.

Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:40 -08:00
Dan Williams be9fa5a436 dmatest: use pseudo random numbers
There is no need for dmatest to drain the entropy pool.

It would be nice to one day have repeatable runs, but would need a
larger rework to synchronize and order calls to the rng across test
threads.

Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:40 -08:00
Dan Williams a9e554957d dmatest: support xor-only, or pq-only channels in tests
Currently we only test raid channels that happen to also have 'copy'
capability.  Search for capable channels that do not have DMA_MEMCPY.

Note the return value from run_threaded_test never really made sense
because it could return errors after successfully starting tests.  We
already have the test results per channel so missing channels can be
detected at that time.

Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:39 -08:00
Dan Williams a310d037b8 dmatest: restore ability to start test at module load and init
1/ move 'run' control to a module parameter so we can do:
   modprobe dmatest run=1.  With this moved the rest of the debugfs
   boilerplate can go.

2/ Fix parameter initialization.  Previously the test was being started
   without taking the parameters into account in the built-in case.

Also killed off the '__' version of some routines.  The new rule is just
hold the lock when calling a *threaded_test() routine.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:39 -08:00
Dan Williams 0adff80066 dmatest: cleanup redundant "dmatest: " prefixes
...now that we have a common pr_fmt.



Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:39 -08:00
Dan Williams 872f05c6e9 dmatest: replace stored results mechanism, with uniform messages
For long running tests the tracking results in a memory leak for the "ok"
results, and for the failures the kernel log should be sufficient.  Provide a
uniform format for error messages so they can be easily parsed and remove the
debugfs file.

Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:39 -08:00
Dan Williams 7b61017822 Revert "dmatest: append verify result to results"
This reverts commit d86b2f298e.

The kernel log buffer is sufficient for collecting test results.  The
current logging OOMs the machine on long running tests, and usually only
the first error is relevant.  It is better to stop on error and parse
the kernel output.  If output volume becomes an issue we can always
investigate using trace messages.

Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:38 -08:00
Bartlomiej Zolnierkiewicz 0776ae7b89 dmaengine: remove DMA unmap flags
Remove no longer needed DMA unmap flags:
- DMA_COMPL_SKIP_SRC_UNMAP
- DMA_COMPL_SKIP_DEST_UNMAP
- DMA_COMPL_SRC_UNMAP_SINGLE
- DMA_COMPL_DEST_UNMAP_SINGLE

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Jon Mason <jon.mason@intel.com>
Acked-by: Mark Brown <broonie@linaro.org>
[djbw: clean up straggling skip unmap flags in ntb]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:38 -08:00
Bartlomiej Zolnierkiewicz 54f8d501e8 dmaengine: remove DMA unmap from drivers
Remove support for DMA unmapping from drivers as it is no longer
needed (DMA core code is now handling it).

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[djbw: fix up chan2parent() unused warning in drivers/dma/dw/core.c]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:38 -08:00
Dan Williams 7476bd79fc async_pq: convert to dmaengine_unmap_data
Use the generic unmap object to unmap dma buffers.

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
[bzolnier: keep temporary dma_dest array in do_async_gen_syndrome()]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:01:31 -08:00
Dan Williams 8971646294 async_memcpy: convert to dmaengine_unmap_data
Use the generic unmap object to unmap dma buffers.

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
[bzolnier: add missing unmap->len initialization]
[bzolnier: fix whitespace damage]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[djbw: add DMA_ENGINE=n support]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:00:39 -08:00
Dan Williams 45c463ae92 dmaengine: reference counted unmap data
Hang a common 'unmap' object off of dma descriptors for the purpose of
providing a unified unmapping interface.  The lifetime of a mapping may
span multiple descriptors, so these unmap objects are reference counted
by related descriptor.

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
[bzolnier: fix IS_ENABLED() check]
[bzolnier: fix release ordering in dmaengine_destroy_unmap_pool()]
[bzolnier: fix check for success in dmaengine_init_unmap_pool()]
[bzolnier: use mempool_free() instead of kmem_cache_free()]
[bzolnier: add missing unmap->len initializations]
[bzolnier: add __init tag to dmaengine_init_unmap_pool()]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[djbw: move DMAENGINE=n support to this patch for async_tx]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-13 16:25:06 -08:00
Dan Williams d38a8c622a dmaengine: prepare for generic 'unmap' data
Add a hook for a common dma unmap implementation to enable removal of
the per driver custom unmap code.  (A reworked version of Bartlomiej
Zolnierkiewicz's patches to remove the custom callbacks and the size
increase of dma_async_tx_descriptor for drivers that don't care about
raid).

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
[bzolnier: prepare pl330 driver for adding missing unmap while at it]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-13 16:25:06 -08:00
Dan Williams 56ea27fd61 dmaengine: consolidate memcpy apis
Copying from page to page (dma_async_memcpy_pg_to_pg) is the superset,
make the other two apis use that one in preparation for providing a
common dma unmap implementation.  The common implementation just wants
to assume all buffers are mapped with dma_map_page().

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-13 16:25:06 -08:00
Linus Torvalds 8ceafbfa91 Merge branch 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm
Pull DMA mask updates from Russell King:
 "This series cleans up the handling of DMA masks in a lot of drivers,
  fixing some bugs as we go.

  Some of the more serious errors include:
   - drivers which only set their coherent DMA mask if the attempt to
     set the streaming mask fails.
   - drivers which test for a NULL dma mask pointer, and then set the
     dma mask pointer to a location in their module .data section -
     which will cause problems if the module is reloaded.

  To counter these, I have introduced two helper functions:
   - dma_set_mask_and_coherent() takes care of setting both the
     streaming and coherent masks at the same time, with the correct
     error handling as specified by the API.
   - dma_coerce_mask_and_coherent() which resolves the problem of
     drivers forcefully setting DMA masks.  This is more a marker for
     future work to further clean these locations up - the code which
     creates the devices really should be initialising these, but to fix
     that in one go along with this change could potentially be very
     disruptive.

  The last thing this series does is prise away some of Linux's addition
  to "DMA addresses are physical addresses and RAM always starts at
  zero".  We have ARM LPAE systems where all system memory is above 4GB
  physical, hence having DMA masks interpreted by (eg) the block layers
  as describing physical addresses in the range 0..DMAMASK fails on
  these platforms.  Santosh Shilimkar addresses this in this series; the
  patches were copied to the appropriate people multiple times but were
  ignored.

  Fixing this also gets rid of some ARM weirdness in the setup of the
  max*pfn variables, and brings ARM into line with every other Linux
  architecture as far as those go"

* 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm: (52 commits)
  ARM: 7805/1: mm: change max*pfn to include the physical offset of memory
  ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations
  ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations
  ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function
  ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit()
  ARM: DMA-API: better handing of DMA masks for coherent allocations
  ARM: 7857/1: dma: imx-sdma: setup dma mask
  DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks
  DMA-API: dcdbas: update DMA mask handing
  DMA-API: dma: edma.c: no need to explicitly initialize DMA masks
  DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks
  DMA-API: crypto: remove last references to 'static struct device *dev'
  DMA-API: crypto: fix ixp4xx crypto platform device support
  DMA-API: others: use dma_set_coherent_mask()
  DMA-API: staging: use dma_set_coherent_mask()
  DMA-API: usb: use new dma_coerce_mask_and_coherent()
  DMA-API: usb: use dma_set_coherent_mask()
  DMA-API: parport: parport_pc.c: use dma_coerce_mask_and_coherent()
  DMA-API: net: octeon: use dma_coerce_mask_and_coherent()
  DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent()
  ...
2013-11-14 07:55:21 +09:00
Bartlomiej Zolnierkiewicz d1cab34c03 dmatest: make driver unmap also source buffers by itself
Make the driver DMA unmap also source buffers by itself
(currently it DMA unmaps only destination buffers) as
a preparation for introducing generic 'ummap' data.

Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-13 11:49:38 -08:00
Dan Carpenter 2f986ec6fa dma: pl330: silence a compile warning
On 64 bit systems GCC warns that:

drivers/dma/pl330.c: In function ‘pl330_filter’:
drivers/dma/pl330.c:2317:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]

It's harmless and I have casted it away.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-13 18:49:44 +05:30
Dan Carpenter 02808b4276 dma: pl330: off by one in pl330_probe()
There are only AMBA_NR_IRQS (2) elements in adev->irq[].  This code
maybe works if the there is a zero directly after the array.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-13 18:49:43 +05:30
Markus Pargmann 2dcbdce361 dma: mxs-dma: Use semaphores for cyclic DMA
mxs dma channel hardware reset command is not reliable and can cause
a channel stall. The only way to fix the channel stall is a DMA engine
reset.

To avoid channel resets we use the hardware semaphore counter. For each
transmitted segment, the DMA channel will decrease the counter by one.
To use this mechanism with cyclic DMA, we need to increase the semaphore
counter with each completed DMA command in the interrupt handler. To
avoid any interruptions between the DMA transfers, the semaphore counter
is initialized with 2. This way the counter can be increased in the
interrupt handler without an influence on the transfer of the DMA
engine.

When disabling the channel, we stop increasing the semaphore counter in
the interrupt handler.

This patch was tested on i.MX28 with the SAIF DMA channel.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-13 15:38:31 +05:30
Markus Pargmann bb3660f130 dma: mxs-dma: Update state after channel reset
After a channel reset, the channel stops running automatically. The
state update was missing so that a channel perperation right after a
channel reset failed.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-13 15:38:30 +05:30
Markus Pargmann 702e94d66b dma: mxs-dma: Fix channel reset hardware bug
This is no official errata, but I noticed that the channel reset may
stop working if the DMA state engine is in the READ_FLUSH state.

This patch uses the channel debug1 register to wait for the DMA
statemachine to leave the READ_FLUSH state. After that we can continue
to reset the channel.

Tested on i.MX28.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-13 15:38:30 +05:30
Markus Pargmann 7b11304a3c dma: mxs-dma: Report correct residue for cyclic DMA
Use the channel's buffer address register to calculate correct residue
value for tx_status.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-13 15:38:30 +05:30
Markus Pargmann b2d639890b dma: mxs-dma: Cleanup interrupt handler
The DMA interrupt handler uses its controll registers to handle all
available channel interrupts it can find.

This patch changes it to handle only one interrupt by directly mapping
irq number to channel. It also includes a cleanup of the ctrl-register
usage.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-13 15:38:30 +05:30
Hongbo Zhang 8de7a7d950 DMA: Freescale: update driver to support 8-channel DMA engine
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.

Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-13 14:26:27 +05:30
Olof Johansson c3cc74b247 dma: imx-sdma: Fix warnings for LPAE builds
This resolves a number of warnings such as the below when building with
64-bit dma_addr_t on arm:

drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of
  type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=]

..by upcasting to u64 and using %llx.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-13 14:10:48 +05:30
Olof Johansson 40911c7dc0 dmaengine: ipu: fix warnings from 64-bit dma_addr_t printouts
This resolves a number of warnings such as the below when building with
64-bit dma_addr_t on arm:

drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument
  of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=]

..by upcasting to u64 and using %llx.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-13 14:10:48 +05:30
Vinod Koul b6d5050ccc dmaengine: edma: remove duplicate kfree
fixing of freeing descriptor memory was applied twice, so remove the one
duplicate

Reported-by: Wing-Keung Wang <wingkeung.wang@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-13 14:10:20 +05:30
Nicolin Chen a6dd30e2bc drivers/dma/mmp_tdma.c: use gen_pool_dma_alloc() to allocate descriptor
Since gen_pool_dma_alloc() is introduced, we implement it to simplify code.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:23 +09:00
Sebastian Andrzej Siewior cbf1e56e6a dma: cppi41: return code > 0 of pm_runtime_get_sync() is not an error
Return code of pm_runtime_get_sync() > 0 is not an error and may happen.
Noticed during rmmod & modprobe testing.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-12 14:28:25 +05:30
Sebastian Andrzej Siewior 1e378a6d77 dma: cppi41: redo descriptor collection in abort case
Most of the logic here is try and error since what actually happens does
not match the trm or I miss read it.
My first assumption was that the queue on which the tear-down descriptor
completes (their own complete queue vs "active descriptor" complete
queue) depends on the transfer direction. This seems not to be true
because I manage to trigger
|  WARN_ON(c->desc_phys != desc_phys);
and the other few were fine means the tear-down descriptor was valid but
on different queue.

This patch changes the logic here to look on both queues for the
descriptor.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-12 14:28:24 +05:30
Daniel Mack 706ff628f0 dma: cppi41: use cppi41_pop_desc() where possible
Use cppi41_pop_desc() when appropriate instead of open-coding the same
functionality again. That makes the code more readable. The function has
to be moved some lines up for this change.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-12 14:28:24 +05:30
Daniel Mack f8964968ab dma: cppi41: restore more registers
With active users over suspend/resume cycles, it turns out that
more registers, in particular DMA_TDFDQ and RXHPCRA0, have to be
restored on resume.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-12 14:28:24 +05:30
Linus Torvalds 10d0c9705e DeviceTree updates for 3.13. This is a bit larger pull request than
usual for this cycle with lots of clean-up.
 
 - Cross arch clean-up and consolidation of early DT scanning code.
 - Clean-up and removal of arch prom.h headers. Makes arch specific
   prom.h optional on all but Sparc.
 - Addition of interrupts-extended property for devices connected to
   multiple interrupt controllers.
 - Refactoring of DT interrupt parsing code in preparation for deferred
   probe of interrupts.
 - ARM cpu and cpu topology bindings documentation.
 - Various DT vendor binding documentation updates.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJSgPQ4AAoJEMhvYp4jgsXif28H/1WkrXq5+lCFQZF8nbYdE2h0
 R8PsfiJJmAl6/wFgQTsRel+ScMk2hiP08uTyqf2RLnB1v87gCF7MKVaLOdONfUDi
 huXbcQGWCmZv0tbBIklxJe3+X3FIJch4gnyUvPudD1m8a0R0LxWXH/NhdTSFyB20
 PNjhN/IzoN40X1PSAhfB5ndWnoxXBoehV/IVHVDU42vkPVbVTyGAw5qJzHW8CLyN
 2oGTOalOO4ffQ7dIkBEQfj0mrgGcODToPdDvUQyyGZjYK2FY2sGrjyquir6SDcNa
 Q4gwatHTu0ygXpyphjtQf5tc3ZCejJ/F0s3olOAS1ahKGfe01fehtwPRROQnCK8=
 =GCbY
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
 "DeviceTree updates for 3.13.  This is a bit larger pull request than
  usual for this cycle with lots of clean-up.

   - Cross arch clean-up and consolidation of early DT scanning code.
   - Clean-up and removal of arch prom.h headers.  Makes arch specific
     prom.h optional on all but Sparc.
   - Addition of interrupts-extended property for devices connected to
     multiple interrupt controllers.
   - Refactoring of DT interrupt parsing code in preparation for
     deferred probe of interrupts.
   - ARM cpu and cpu topology bindings documentation.
   - Various DT vendor binding documentation updates"

* tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits)
  powerpc: add missing explicit OF includes for ppc
  dt/irq: add empty of_irq_count for !OF_IRQ
  dt: disable self-tests for !OF_IRQ
  of: irq: Fix interrupt-map entry matching
  MIPS: Netlogic: replace early_init_devtree() call
  of: Add Panasonic Corporation vendor prefix
  of: Add Chunghwa Picture Tubes Ltd. vendor prefix
  of: Add AU Optronics Corporation vendor prefix
  of/irq: Fix potential buffer overflow
  of/irq: Fix bug in interrupt parsing refactor.
  of: set dma_mask to point to coherent_dma_mask
  of: add vendor prefix for PHYTEC Messtechnik GmbH
  DT: sort vendor-prefixes.txt
  of: Add vendor prefix for Cadence
  of: Add empty for_each_available_child_of_node() macro definition
  arm/versatile: Fix versatile irq specifications.
  of/irq: create interrupts-extended property
  microblaze/pci: Drop PowerPC-ism from irq parsing
  of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code.
  of/irq: Use irq_of_parse_and_map()
  ...
2013-11-12 16:52:17 +09:00
Joel Fernandes 50a9c70714 dma: edma: Add support for Cyclic DMA
Using the PaRAM configuration function that we split for reuse by the
different DMA types, we implement Cyclic DMA support.
For the cyclic case, we pass different configuration parameters to this
function, and handle all the Cyclic-specific functionality separately.

Callbacks to the DMA users are handled using vchan_cyclic_callback in
the virt-dma layer. Linking is handled the same way as the slave SG case
except for the last slot where we link it back to the first one in a
cyclic fashion.

For continuity, we check for cases where no.of periods is great than the
MAX number of slots the driver can allocate for a particular descriptor
and error out on such cases.

Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-12 09:17:14 +05:30
Rob Herring c11eede69b powerpc: add missing explicit OF includes for ppc
Commit b5b4bb3f6a (of: only include prom.h on sparc) removed implicit
includes of of_*.h headers by powerpc's prom.h. Some components were
missed in initial clean-up patch, so add the necessary includes to fix
powerpc builds.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-ide@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
2013-11-11 09:10:50 -06:00