Commit Graph

366 Commits

Author SHA1 Message Date
Linus Torvalds dce45af5c2 5.2 Merge Window pull request
This has been a smaller cycle than normal. One new driver was accepted,
 which is unusual, and at least one more driver remains in review on the
 list.
 
 - Driver fixes for hns, hfi1, nes, rxe, i40iw, mlx5, cxgb4, vmw_pvrdma
 
 - Many patches from MatthewW converting radix tree and IDR users to use
   xarray
 
 - Introduction of tracepoints to the MAD layer
 
 - Build large SGLs at the start for DMA mapping and get the driver to
   split them
 
 - Generally clean SGL handling code throughout the subsystem
 
 - Support for restricting RDMA devices to net namespaces for containers
 
 - Progress to remove object allocation boilerplate code from drivers
 
 - Change in how the mlx5 driver shows representor ports linked to VFs
 
 - mlx5 uapi feature to access the on chip SW ICM memory
 
 - Add a new driver for 'EFA'. This is HW that supports user space packet
   processing through QPs in Amazon's cloud
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAlzTIU0ACgkQOG33FX4g
 mxrGKQ/8CqpyvuCyZDW5ovO4DI4YlzYSPXehWlwxA4CWhU1AYTujutnNOdZdngnz
 atTthOlJpZWJV26orvvzwIOi4qX/5UjLXEY3HYdn07JP1Z4iT7E3P4W2sdU3vdl3
 j8bU7xM7ZWmnGxrBZ6yQlVRadEhB8+HJIZWMw+wx66cIPnvU+g9NgwouH67HEEQ3
 PU8OCtGBwNNR508WPiZhjqMDfi/3BED4BfCihFhMbZEgFgObjRgtCV0M33SSXKcR
 IO2FGNVuDAUBlND3vU9guW1+M77xE6p1GvzkIgdCp6qTc724NuO5F2ngrpHKRyZT
 CxvBhAJI6tAZmjBVnmgVJex7rA8p+y/8M/2WD6GE3XSO89XVOkzNBiO2iTMeoxXr
 +CX6VvP2BWwCArxsfKMgW3j0h/WVE9w8Ciej1628m1NvvKEV4AGIJC1g93lIJkRN
 i3RkJ5PkIrdBrTEdKwDu1FdXQHaO7kGgKvwzJ7wBFhso8BRMrMfdULiMbaXs2Bw1
 WdL5zoSe/bLUpPZxcT9IjXRxY5qR0FpIOoo6925OmvyYe/oZo1zbitS5GGbvV90g
 tkq6Jb+aq8ZKtozwCo+oMcg9QPLYNibQsnkL3QirtURXWCG467xdgkaJLdF6s5Oh
 cp+YBqbR/8HNMG/KQlCfnNQKp1ci8mG3EdthQPhvdcZ4jtbqnSI=
 =TS64
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma updates from Jason Gunthorpe:
 "This has been a smaller cycle than normal. One new driver was
  accepted, which is unusual, and at least one more driver remains in
  review on the list.

  Summary:

   - Driver fixes for hns, hfi1, nes, rxe, i40iw, mlx5, cxgb4,
     vmw_pvrdma

   - Many patches from MatthewW converting radix tree and IDR users to
     use xarray

   - Introduction of tracepoints to the MAD layer

   - Build large SGLs at the start for DMA mapping and get the driver to
     split them

   - Generally clean SGL handling code throughout the subsystem

   - Support for restricting RDMA devices to net namespaces for
     containers

   - Progress to remove object allocation boilerplate code from drivers

   - Change in how the mlx5 driver shows representor ports linked to VFs

   - mlx5 uapi feature to access the on chip SW ICM memory

   - Add a new driver for 'EFA'. This is HW that supports user space
     packet processing through QPs in Amazon's cloud"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (186 commits)
  RDMA/ipoib: Allow user space differentiate between valid dev_port
  IB/core, ipoib: Do not overreact to SM LID change event
  RDMA/device: Don't fire uevent before device is fully initialized
  lib/scatterlist: Remove leftover from sg_page_iter comment
  RDMA/efa: Add driver to Kconfig/Makefile
  RDMA/efa: Add the efa module
  RDMA/efa: Add EFA verbs implementation
  RDMA/efa: Add common command handlers
  RDMA/efa: Implement functions that submit and complete admin commands
  RDMA/efa: Add the ABI definitions
  RDMA/efa: Add the com service API definitions
  RDMA/efa: Add the efa_com.h file
  RDMA/efa: Add the efa.h header file
  RDMA/efa: Add EFA device definitions
  RDMA: Add EFA related definitions
  RDMA/umem: Remove hugetlb flag
  RDMA/bnxt_re: Use core helpers to get aligned DMA address
  RDMA/i40iw: Use core helpers to get aligned DMA address within a supported page size
  RDMA/verbs: Add a DMA iterator to return aligned contiguous memory blocks
  RDMA/umem: Add API to find best driver supported page size in an MR
  ...
2019-05-09 09:02:46 -07:00
Daniel T. Lee ead442a0f9 samples: bpf: add hbm sample to .gitignore
This commit adds hbm to .gitignore which is
currently ommited from the ignore file.

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-25 23:38:00 +02:00
Alexei Starovoitov 636e78b1cd samples/bpf: fix build with new clang
clang started to error on invalid asm clobber usage in x86 headers
and many bpf program samples failed to build with the message:

  CLANG-bpf  /data/users/ast/bpf-next/samples/bpf/xdp_redirect_kern.o
In file included from /data/users/ast/bpf-next/samples/bpf/xdp_redirect_kern.c:14:
In file included from ../include/linux/in.h:23:
In file included from ../include/uapi/linux/in.h:24:
In file included from ../include/linux/socket.h:8:
In file included from ../include/linux/uio.h:14:
In file included from ../include/crypto/hash.h:16:
In file included from ../include/linux/crypto.h:26:
In file included from ../include/linux/uaccess.h:5:
In file included from ../include/linux/sched.h:15:
In file included from ../include/linux/sem.h:5:
In file included from ../include/uapi/linux/sem.h:5:
In file included from ../include/linux/ipc.h:9:
In file included from ../include/linux/refcount.h:72:
../arch/x86/include/asm/refcount.h:72:36: error: asm-specifier for input or output variable conflicts with asm clobber list
                                         r->refs.counter, e, "er", i, "cx");
                                                                      ^
../arch/x86/include/asm/refcount.h:86:27: error: asm-specifier for input or output variable conflicts with asm clobber list
                                         r->refs.counter, e, "cx");
                                                             ^
2 errors generated.

Override volatile() to workaround the problem.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-05 16:28:36 +02:00
Daniel T. Lee e67b2c7154 samples, selftests/bpf: add NULL check for ksym_search
Since, ksym_search added with verification logic for symbols existence,
it could return NULL when the kernel symbols are not loaded.

This commit will add NULL check logic after ksym_search.

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-04 16:43:47 +02:00
Ira Weiny 0ac01febd4 BPF: Add sample code for new ib_umad tracepoint
Provide a count of class types for a summary of MAD packets.  The example
shows one way to filter the trace data based on management class.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27 15:53:26 -03:00
Daniel T. Lee ab99e7a8f7 samples: bpf: add xdp_sample_pkts to .gitignore
This commit adds xdp_sample_pkts to .gitignore which is
currently ommited from the ignore file.

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-21 19:35:36 -07:00
Colin Ian King 5b4f21b2a5 bpf: hbm: fix spelling mistake "deault" -> "default"
There are a couple of typos, fix these.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-07 10:35:00 +01:00
brakmo 4ffd44cfd1 bpf: HBM test script
Script for testing HBM (Host Bandwidth Manager) framework.
It creates a cgroup to use for testing and load a BPF program to limit
egress bandwidht. It then uses iperf3 or netperf to create
loads. The output is the goodput in Mbps (unless -D is used).

It can work on a single host using loopback or among two hosts (with netperf).
When using loopback, it is recommended to also introduce a delay of at least
1ms (-d=1), otherwise the assigned bandwidth is likely to be underutilized.

USAGE: $name [out] [-b=<prog>|--bpf=<prog>] [-c=<cc>|--cc=<cc>] [-D]
             [-d=<delay>|--delay=<delay>] [--debug] [-E]
             [-f=<#flows>|--flows=<#flows>] [-h] [-i=<id>|--id=<id >] [-l]
	     [-N] [-p=<port>|--port=<port>] [-P] [-q=<qdisc>]
             [-R] [-s=<server>|--server=<server] [--stats]
	     [-t=<time>|--time=<time>] [-w] [cubic|dctcp]
  Where:
    out               Egress (default egress)
    -b or --bpf       BPF program filename to load and attach.
                      Default is nrm_out_kern.o for egress,
    -c or -cc         TCP congestion control (cubic or dctcp)
    -d or --delay     Add a delay in ms using netem
    -D                In addition to the goodput in Mbps, it also outputs
                      other detailed information. This information is
                      test dependent (i.e. iperf3 or netperf).
    --debug           Print BPF trace buffer
    -E                Enable ECN (not required for dctcp)
    -f or --flows     Number of concurrent flows (default=1)
    -i or --id        cgroup id (an integer, default is 1)
    -l                Do not limit flows using loopback
    -N                Use netperf instead of iperf3
    -h                Help
    -p or --port      iperf3 port (default is 5201)
    -P                Use an iperf3 instance for each flow
    -q                Use the specified qdisc.
    -r or --rate      Rate in Mbps (default 1s 1Gbps)
    -R                Use TCP_RR for netperf. 1st flow has req
                      size of 10KB, rest of 1MB. Reply in all
                      cases is 1 byte.
                      More detailed output for each flow can be found
                      in the files netperf.<cg>.<flow>, where <cg> is the
                      cgroup id as specified with the -i flag, and <flow>
                      is the flow id starting at 1 and increasing by 1 for
                      flow (as specified by -f).
    -s or --server    hostname of netperf server. Used to create netperf
                      test traffic between to hosts (default is within host)
                      netserver must be running on the host.
    --stats           Get HBM stats (marked, dropped, etc.)
    -t or --time      duration of iperf3 in seconds (default=5)
    -w                Work conserving flag. cgroup can increase its
                      bandwidth beyond the rate limit specified
                      while there is available bandwidth. Current
                      implementation assumes there is only one NIC
                      (eth0), but can be extended to support multiple
                      NICs. This is just a proof of concept.
    cubic or dctcp    specify TCP CC to use

Examples:
 ./do_hbm_test.sh -l -d=1 -D --stats
     Runs a 5 second test, using a single iperf3 flow and with the default
     rate limit of 1Gbps and a delay of 1ms (using netem) using the default
     TCP congestion control on the loopback device (hence we use "-l" to
     enforce bandwidth limit on loopback device). Since no direction is
     specified, it defaults to egress. Since no TCP CC algorithm is
     specified it uses the system default (Cubic for this test).
     With no -D flag, only the value of the AGGREGATE OUTPUT would show.
     id refers to the cgroup id and is useful when running multi cgroup
     tests (supported by a future patch).
     This patchset does not support calling TCP's congesion window
     reduction, even when packets are dropped by the BPF program, resulting
     in a large number of packets dropped. It is recommended that the  current
     HBM implemenation only be used with ECN enabled flows. A future patch
     will add support for reducing TCP's cwnd and will increase the
     performance of non-ECN enabled flows.
   Output:
     Details for HBM in cgroup 1
     id:1
     rate_mbps:493
     duration:4.8 secs
     packets:11355
     bytes_MB:590
     pkts_dropped:4497
     bytes_dropped_MB:292
     pkts_marked_percent: 39.60
     bytes_marked_percent: 49.49
     pkts_dropped_percent: 39.60
     bytes_dropped_percent: 49.49
     PING AVG DELAY:2.075
     AGGREGATE_GOODPUT:505

./do_nrm_test.sh -l -d=1 -D --stats dctcp
     Same as above but using dctcp. Note that fewer bytes are dropped
     (0.01% vs. 49%).
   Output:
     Details for HBM in cgroup 1
     id:1
     rate_mbps:945
     duration:4.9 secs
     packets:16859
     bytes_MB:578
     pkts_dropped:1
     bytes_dropped_MB:0
     pkts_marked_percent: 28.74
     bytes_marked_percent: 45.15
     pkts_dropped_percent:  0.01
     bytes_dropped_percent:  0.01
     PING AVG DELAY:2.083
     AGGREGATE_GOODPUT:965

./do_nrm_test.sh -d=1 -D --stats
     As first example, but without limiting loopback device (i.e. no
     "-l" flag). Since there is no bandwidth limiting, no details for
     HBM are printed out.
   Output:
     Details for HBM in cgroup 1
     PING AVG DELAY:2.019
     AGGREGATE_GOODPUT:42655

./do_hbm.sh -l -d=1 -D --stats -f=2
     Uses iper3 and does 2 flows
./do_hbm.sh -l -d=1 -D --stats -f=4 -P
     Uses iperf3 and does 4 flows, each flow as a separate process.
./do_hbm.sh -l -d=1 -D --stats -f=4 -N
     Uses netperf, 4 flows
./do_hbm.sh -f=1 -r=2000 -t=5 -N -D --stats dctcp -s=<server-name>
     Uses netperf between two hosts. The remote host name is specified
     with -s= and you need to start the program netserver manually on
     the remote host. It will use 1 flow, a rate limit of 2Gbps and dctcp.
./do_hbm.sh -f=1 -r=2000 -t=5 -N -D --stats -w dctcp \
     -s=<server-name>
     As previous, but allows use of extra bandwidth. For this test the
     rate is 8Gbps vs. 1Gbps of the previous test.

Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02 10:48:27 -08:00
brakmo a1270fe95b bpf: User program for testing HBM
The program nrm creates a cgroup and attaches a BPF program to the
cgroup for testing HBM (Host Bandwidth Manager) for egress traffic.
One still needs to create network traffic. This can be done through
netesto, netperf or iperf3.
A follow-up patch contains a script to create traffic.

USAGE: hbm [-d] [-l] [-n <id>] [-r <rate>] [-s] [-t <secs>]
           [-w] [-h] [prog]
  Where:
   -d        Print BPF trace debug buffer
   -l        Also limit flows doing loopback
   -n <#>    To create cgroup "/hbm#" and attach prog. Default is /nrm1
             This is convenient when testing HBM in more than 1 cgroup
   -r <rate> Rate limit in Mbps
   -s        Get HBM stats (marked, dropped, etc.)
   -t <time> Exit after specified seconds (deault is 0)
   -w        Work conserving flag. cgroup can increase its bandwidth
             beyond the rate limit specified while there is available
             bandwidth. Current implementation assumes there is only
             NIC (eth0), but can be extended to support multiple NICs.
             Currrently only supported for egress. Note, this is just
	     a proof of concept.
   -h        Print this info
   prog      BPF program file name. Name defaults to hbm_out_kern.o

More information about HBM can be found in the paper "BPF Host Resource
Management" presented at the 2018 Linux Plumbers Conference, Networking Track
(http://vger.kernel.org/lpc_net2018_talks/LPC%20BPF%20Network%20Resource%20Paper.pdf)

Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02 10:48:27 -08:00
brakmo 187d0738ff bpf: Sample HBM BPF program to limit egress bw
A cgroup skb BPF program to limit cgroup output bandwidth.
It uses a modified virtual token bucket queue to limit average
egress bandwidth. The implementation uses credits instead of tokens.
Negative credits imply that queueing would have happened (this is
a virtual queue, so no queueing is done by it. However, queueing may
occur at the actual qdisc (which is not used for rate limiting).

This implementation uses 3 thresholds, one to start marking packets and
the other two to drop packets:
                                 CREDIT
       - <--------------------------|------------------------> +
             |    |          |      0
             |  Large pkt    |
             |  drop thresh  |
  Small pkt drop             Mark threshold
      thresh

The effect of marking depends on the type of packet:
a) If the packet is ECN enabled, then the packet is ECN ce marked.
   The current mark threshold is tuned for DCTCP.
c) Else, it is dropped if it is a large packet.

If the credit is below the drop threshold, the packet is dropped.
Note that dropping a packet through the BPF program does not trigger CWR
(Congestion Window Reduction) in TCP packets. A future patch will add
support for triggering CWR.

This BPF program actually uses 2 drop thresholds, one threshold
for larger packets (>= 120 bytes) and another for smaller packets. This
protects smaller packets such as SYNs, ACKs, etc.

The default bandwidth limit is set at 1Gbps but this can be changed by
a user program through a shared BPF map. In addition, by default this BPF
program does not limit connections using loopback. This behavior can be
overwritten by the user program. There is also an option to calculate
some statistics, such as percent of packets marked or dropped, which
the user program can access.

A latter patch provides such a program (hbm.c)

Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02 10:48:27 -08:00
Yonghong Song b74e21ab7d samples/bpf: silence compiler warning for xdpsock_user.c
Compiling xdpsock_user.c with 4.8.5, I hit the following
compilation warning:
    HOSTCC  samples/bpf/xdpsock_user.o
  /data/users/yhs/work/net-next/samples/bpf/xdpsock_user.c: In function ‘main’:
  /data/users/yhs/work/net-next/samples/bpf/xdpsock_user.c:449:6: warning: ‘idx_cq’ may be used unini
  tialized in this function [-Wmaybe-uninitialized]
    u32 idx_cq, idx_fq;
        ^
  /data/users/yhs/work/net-next/samples/bpf/xdpsock_user.c:606:7: warning: ‘idx_rx’ may be used unini
  tialized in this function [-Wmaybe-uninitialized]
     u32 idx_rx, idx_tx = 0;
         ^
  /data/users/yhs/work/net-next/samples/bpf/xdpsock_user.c:506:6: warning: ‘idx_rx’ may be used unini
  tialized in this function [-Wmaybe-uninitialized]
    u32 idx_rx, idx_fq = 0;

As an example, the code pattern looks like:
    u32 idx_cq;
    ...
    ret = xsk_ring_prod__reserve(&xsk->umem->fq, rcvd, &idx_fq);
    if (ret) {
      ...
    }
    ... idx_fq ...
The compiler warns since it does not know whether &idx_fq is assigned
or not inside the library function xsk_ring_prod__reserve().

Let us assign an initial value 0 to such auto variables to silence
compiler warning.

Fixes: 248c7f9c0e ("samples/bpf: convert xdpsock to use libbpf for AF_XDP access")
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-02 01:07:10 +01:00
Jakub Kicinski 1a9b268c90 samples: bpf: use libbpf where easy
Some samples don't really need the magic of bpf_load,
switch them to libbpf.

v2: - specify program types.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01 00:53:45 +01:00
Jakub Kicinski ea9b636201 samples: bpf: remove load_sock_ops in favour of bpftool
bpftool can do all the things load_sock_ops used to do, and more.
Point users to bpftool instead of maintaining this sample utility.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01 00:53:45 +01:00
Jakub Kicinski 5c3cf87d47 samples: bpf: force IPv4 in ping
ping localhost may default of IPv6 on modern systems, but
samples are trying to only parse IPv4.  Force IPv4.

samples/bpf/tracex1_user.c doesn't interpret the packet so
we don't care which IP version will be used there.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01 00:53:45 +01:00
Daniel T. Lee d2e614cb07 samples: bpf: fix: broken sample regarding removed function
Currently, running sample "task_fd_query" and "tracex3" occurs the
following error. On kernel v5.0-rc* this sample will be unavailable
due to the removal of function 'blk_start_request' at commit "a1ce35f".
(function removed, as "Single Queue IO scheduler" no longer exists)

$ sudo ./task_fd_query
failed to create kprobe 'blk_start_request' error 'No such file or
directory'

This commit will change the function 'blk_start_request' to
'blk_mq_start_request' to fix the broken sample.

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-27 17:27:22 +01:00
Magnus Karlsson 248c7f9c0e samples/bpf: convert xdpsock to use libbpf for AF_XDP access
This commit converts the xdpsock sample application to use the AF_XDP
functions present in libbpf. This cuts down the size of it by nearly
300 lines of code.

The default ring sizes plus the batch size has been increased and the
size of the umem area has decreased. This so that the sample application
will provide higher throughput. Note also that the shared umem code
has been removed from the sample as this is not supported by libbpf
at this point in time.

Tested-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-25 23:21:42 +01:00
Toke Høiland-Jørgensen 915654fd71 samples/bpf: Fix dummy program unloading for xdp_redirect samples
The xdp_redirect and xdp_redirect_map sample programs both load a dummy
program onto the egress interfaces. However, the unload code checks these
programs against the wrong id number, and thus refuses to unload them. Fix
the comparison to avoid this.

Fixes: 3b7a8ec2de ("samples/bpf: Check the prog id before exiting")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-22 16:21:59 +01:00
Maciej Fijalkowski 3b7a8ec2de samples/bpf: Check the prog id before exiting
Check the program id within the signal handler on polling xdp samples
that were previously converted to libbpf usage. Avoid the situation of
unloading the program that was not attached by sample that is exiting.
Handle also the case where bpf_get_link_xdp_id didn't exit with an error
but the xdp program was not found on an interface.

Reported-by: Michal Papaj <michal.papaj@intel.com>
Reported-by: Jakub Spizewski <jakub.spizewski@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-01 23:37:51 +01:00
Maciej Fijalkowski 743e568c15 samples/bpf: Add a "force" flag to XDP samples
Make xdp samples consistent with iproute2 behavior and set the
XDP_FLAGS_UPDATE_IF_NOEXIST by default when setting the xdp program on
interface. Provide an option for user to force the program loading,
which as a result will not include the mentioned flag in
bpf_set_link_xdp_fd call.

Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-01 23:37:51 +01:00
Maciej Fijalkowski 6a5457618f samples/bpf: Extend RLIMIT_MEMLOCK for xdp_{sample_pkts, router_ipv4}
There is a common problem with xdp samples that happens when user wants
to run a particular sample and some bpf program is already loaded. The
default 64kb RLIMIT_MEMLOCK resource limit will cause a following error
(assuming that xdp sample that is failing was converted to libbpf
usage):

libbpf: Error in bpf_object__probe_name():Operation not permitted(1).
Couldn't load basic 'r0 = 0' BPF program.
libbpf: failed to load object './xdp_sample_pkts_kern.o'

Fix it in xdp_sample_pkts and xdp_router_ipv4 by setting RLIMIT_MEMLOCK
to RLIM_INFINITY.

Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-01 23:37:51 +01:00
Maciej Fijalkowski bbaf6029c4 samples/bpf: Convert XDP samples to libbpf usage
Some of XDP samples that are attaching the bpf program to the interface
via libbpf's bpf_set_link_xdp_fd are still using the bpf_load.c for
loading and manipulating the ebpf program and maps. Convert them to do
this through libbpf usage and remove bpf_load from the picture.

While at it remove what looks like debug leftover in
xdp_redirect_map_user.c

In xdp_redirect_cpu, change the way that the program to be loaded onto
interface is chosen - user now needs to pass the program's section name
instead of the relative number. In case of typo print out the section
names to choose from.

Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-01 23:37:51 +01:00
Jesper Dangaard Brouer 7313798b14 samples/bpf: xdp_redirect_cpu have not need for read_trace_pipe
The sample xdp_redirect_cpu is not using helper bpf_trace_printk.
Thus it makes no sense that the --debug option us reading
from /sys/kernel/debug/tracing/trace_pipe via read_trace_pipe.
Simply remove it.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-01 23:37:51 +01:00
David S. Miller ec7146db15 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2019-01-29

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Teach verifier dead code removal, this also allows for optimizing /
   removing conditional branches around dead code and to shrink the
   resulting image. Code store constrained architectures like nfp would
   have hard time doing this at JIT level, from Jakub.

2) Add JMP32 instructions to BPF ISA in order to allow for optimizing
   code generation for 32-bit sub-registers. Evaluation shows that this
   can result in code reduction of ~5-20% compared to 64 bit-only code
   generation. Also add implementation for most JITs, from Jiong.

3) Add support for __int128 types in BTF which is also needed for
   vmlinux's BTF conversion to work, from Yonghong.

4) Add a new command to bpftool in order to dump a list of BPF-related
   parameters from the system or for a specific network device e.g. in
   terms of available prog/map types or helper functions, from Quentin.

5) Add AF_XDP sock_diag interface for querying sockets from user
   space which provides information about the RX/TX/fill/completion
   rings, umem, memory usage etc, from Björn.

6) Add skb context access for skb_shared_info->gso_segs field, from Eric.

7) Add support for testing flow dissector BPF programs by extending
   existing BPF_PROG_TEST_RUN infrastructure, from Stanislav.

8) Split BPF kselftest's test_verifier into various subgroups of tests
   in order better deal with merge conflicts in this area, from Jakub.

9) Add support for queue/stack manipulations in bpftool, from Stanislav.

10) Document BTF, from Yonghong.

11) Dump supported ELF section names in libbpf on program load
    failure, from Taeung.

12) Silence a false positive compiler warning in verifier's BTF
    handling, from Peter.

13) Fix help string in bpftool's feature probing, from Prashant.

14) Remove duplicate includes in BPF kselftests, from Yue.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28 19:38:33 -08:00
Jiong Wang 6ea848b5ce selftests: bpf: functional and min/max reasoning unit tests for JMP32
This patch adds unit tests for new JMP32 instructions.

This patch also added the new BPF_JMP32_REG and BPF_JMP32_IMM macros to
samples/bpf/bpf_insn.h so that JMP32 insn builders are available to tests
under 'samples' directory.

Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-26 13:33:02 -08:00
Yonghong Song 6bf3bbe1f4 samples/bpf: workaround clang asm goto compilation errors
x86 compilation has required asm goto support since 4.17.
Since clang does not support asm goto, at 4.17,
Commit b1ae32dbab ("x86/cpufeature: Guard asm_volatile_goto usage
for BPF compilation") worked around the issue by permitting an
alternative implementation without asm goto for clang.

At 5.0, more asm goto usages appeared.
  [yhs@148 x86]$ egrep -r asm_volatile_goto
  include/asm/cpufeature.h:     asm_volatile_goto("1: jmp 6f\n"
  include/asm/jump_label.h:     asm_volatile_goto("1:"
  include/asm/jump_label.h:     asm_volatile_goto("1:"
  include/asm/rmwcc.h:  asm_volatile_goto (fullop "; j" #cc " %l[cc_label]"     \
  include/asm/uaccess.h:        asm_volatile_goto("\n"                          \
  include/asm/uaccess.h:        asm_volatile_goto("\n"                          \
  [yhs@148 x86]$

Compiling samples/bpf directories, most bpf programs failed
compilation with error messages like:
  In file included from /home/yhs/work/bpf-next/samples/bpf/xdp_sample_pkts_kern.c:2:
  In file included from /home/yhs/work/bpf-next/include/linux/ptrace.h:6:
  In file included from /home/yhs/work/bpf-next/include/linux/sched.h:15:
  In file included from /home/yhs/work/bpf-next/include/linux/sem.h:5:
  In file included from /home/yhs/work/bpf-next/include/uapi/linux/sem.h:5:
  In file included from /home/yhs/work/bpf-next/include/linux/ipc.h:9:
  In file included from /home/yhs/work/bpf-next/include/linux/refcount.h:72:
  /home/yhs/work/bpf-next/arch/x86/include/asm/refcount.h:70:9: error: 'asm goto' constructs are not supported yet
        return GEN_BINARY_SUFFIXED_RMWcc(LOCK_PREFIX "subl",
               ^
  /home/yhs/work/bpf-next/arch/x86/include/asm/rmwcc.h:67:2: note: expanded from macro 'GEN_BINARY_SUFFIXED_RMWcc'
        __GEN_RMWcc(op " %[val], %[var]\n\t" suffix, var, cc,           \
        ^
  /home/yhs/work/bpf-next/arch/x86/include/asm/rmwcc.h:21:2: note: expanded from macro '__GEN_RMWcc'
        asm_volatile_goto (fullop "; j" #cc " %l[cc_label]"             \
        ^
  /home/yhs/work/bpf-next/include/linux/compiler_types.h:188:37: note: expanded from macro 'asm_volatile_goto'
  #define asm_volatile_goto(x...) asm goto(x)

Most implementation does not even provide an alternative
implementation. And it is also not practical to make changes
for each call site.

This patch workarounded the asm goto issue by redefining the macro like below:
  #define asm_volatile_goto(x...) asm volatile("invalid use of asm_volatile_goto")

If asm_volatile_goto is not used by bpf programs, which is typically the case, nothing bad
will happen. If asm_volatile_goto is used by bpf programs, which is incorrect, the compiler
will issue an error since "invalid use of asm_volatile_goto" is not valid assembly codes.

With this patch, all bpf programs under samples/bpf can pass compilation.

Note that bpf programs under tools/testing/selftests/bpf/ compiled fine as
they do not access kernel internal headers.

Fixes: e769742d35 ("Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"")
Fixes: 18fe58229d ("x86, asm: change the GEN_*_RMWcc() macros to not quote the condition")
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-15 20:57:30 +01:00
Ioana Ciornei 11b36abc24 samples: bpf: user proper argument index
Use optind as index for argv instead of a hardcoded value.
When the program has options this leads to improper parameter handling.

Fixes: dc378a1ab5 ("samples: bpf: get ifindex from ifname")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-10 15:54:47 +01:00
Stanislav Fomichev a8911d6d58 selftests/bpf: fix incorrect users of create_and_get_cgroup
We have some tests that assume create_and_get_cgroup returns -1 on error
which is incorrect (it returns 0 on error). Since fd might be zero in
general case, change create_and_get_cgroup to return -1 on error
and fix the users that assume 0 on error.

Fixes: f269099a7e ("tools/bpf: add a selftest for bpf_get_current_cgroup_id() helper")
Fixes: 7d2c6cfc54 ("bpf: use --cgroup in test_suite if supplied")

v2:
- instead of fixing the uses that assume -1 on error, convert the users
  that assume 0 on error (fd might be zero in general case)

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-07 13:15:55 -08:00
Linus Torvalds 668c35f69c Kbuild updates for v4.21
Kbuild core:
  - remove unneeded $(call cc-option,...) switches
  - consolidate Clang compiler flags into CLANG_FLAGS
  - announce the deprecation of SUBDIRS
  - fix single target build for external module
  - simplify the dependencies of 'prepare' stage targets
  - allow fixdep to directly write to .*.cmd files
  - simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS
  - change if_changed_rule to accept multi-line recipe
  - move .SECONDARY special target to scripts/Kbuild.include
  - remove redundant 'set -e'
  - improve parallel execution for CONFIG_HEADERS_CHECK
  - misc cleanups
 
 Treewide fixes and cleanups
  - set Clang flags correctly for PowerPC boot images
  - fix UML build error with CONFIG_GCC_PLUGINS
  - remove unneeded patterns from .gitignore files
  - refactor firmware/Makefile
  - remove unneeded rules for *offsets.s
  - avoid unneeded regeneration of intermediate .s files
  - clean up ./Kbuild
 
 Modpost:
  - remove unused -M, -K options
  - fix false positive warnings about section mismatch
  - use simple devtable lookup instead of linker magic
  - misc cleanups
 
 Coccinelle:
  - relax boolinit.cocci checks for overall consistency
  - fix warning messages of boolinit.cocci
 
 Other tools:
  - improve -dirty check of scripts/setlocalversion
  - add a tool to generate compile_commands.json from .*.cmd files
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcJiVeAAoJED2LAQed4NsGXEMP/1fdkBfZGxYlxp4w1tEBeRKZ
 GInxxMfHiHZlu7nFPQ3k1mncczZjeLbnKcLaybnPmqBSfQe1F7tN0ux1sHtWkVfI
 DvqoKaHObZ3lEMEVxCHXQ2bKrN/j9nB2xSxzr4dvc9DscW8dwKElZuKVE7nHKdhl
 z70xsalxHGEGY6hptJrucbv8KTBOSleZ8Gaat79sEDkDSLCTjxXB3WcVMWqDT0M/
 IqN5QCwiPjZC3UCwuqq6+vnG1gyvDUORcbrVgHrBIKxLYAABYzugB5IlLpi8B31C
 ZUDmijSTandHd4SG5gw5uZoyYuK4YhZeI7g4yNyXSqnPurmcJxrGdpiuwRcE7xet
 5yB2uaNbAFO6Fbz4gUdDEvryA9IZEPPn1Z0Btfpp7UOxiWEqE61oHReCNdkiad94
 Oonl+ROZw5UOT3AZD3xCZTf9bTnQoCFccHTmnbaKqqSiDWxxLUXum7sNfnJ6GXEb
 fNQDuwuxtsPStaWoU93QNrGyl5e8jYTKFdphUCnZZ2/hE8ygoQ06PYmeBAk+UKfN
 UI2IqR8PHgmA97XJg+fHhbw6X4nQcPsg/usLqxGItAZNO2O4uXgaN24dOcHG74Bu
 2Dk/gQQB2sVB/Dxfmlaxvvj98MVg7IMtpusAT2bQ7miiSS3EqPFT8KQMZYLICWuZ
 u7QQe20yCho3ZULmsRwH
 =0PCt
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:
 "Kbuild core:
   - remove unneeded $(call cc-option,...) switches
   - consolidate Clang compiler flags into CLANG_FLAGS
   - announce the deprecation of SUBDIRS
   - fix single target build for external module
   - simplify the dependencies of 'prepare' stage targets
   - allow fixdep to directly write to .*.cmd files
   - simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS
   - change if_changed_rule to accept multi-line recipe
   - move .SECONDARY special target to scripts/Kbuild.include
   - remove redundant 'set -e'
   - improve parallel execution for CONFIG_HEADERS_CHECK
   - misc cleanups

  Treewide fixes and cleanups
   - set Clang flags correctly for PowerPC boot images
   - fix UML build error with CONFIG_GCC_PLUGINS
   - remove unneeded patterns from .gitignore files
   - refactor firmware/Makefile
   - remove unneeded rules for *offsets.s
   - avoid unneeded regeneration of intermediate .s files
   - clean up ./Kbuild

  Modpost:
   - remove unused -M, -K options
   - fix false positive warnings about section mismatch
   - use simple devtable lookup instead of linker magic
   - misc cleanups

  Coccinelle:
   - relax boolinit.cocci checks for overall consistency
   - fix warning messages of boolinit.cocci

  Other tools:
   - improve -dirty check of scripts/setlocalversion
   - add a tool to generate compile_commands.json from .*.cmd files"

* tag 'kbuild-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits)
  kbuild: remove unused cmd_gentimeconst
  kbuild: remove $(obj)/ prefixes in ./Kbuild
  treewide: add intermediate .s files to targets
  treewide: remove explicit rules for *offsets.s
  firmware: refactor firmware/Makefile
  firmware: remove unnecessary patterns from .gitignore
  scripts: remove unnecessary ihex2fw and check-lc_ctypes from .gitignore
  um: remove unused filechk_gen_header in Makefile
  scripts: add a tool to produce a compile_commands.json file
  kbuild: add -Werror=implicit-int flag unconditionally
  kbuild: add -Werror=strict-prototypes flag unconditionally
  kbuild: add -fno-PIE flag unconditionally
  scripts: coccinelle: Correct warning message
  scripts: coccinelle: only suggest true/false in files that already use them
  kbuild: handle part-of-module correctly for *.ll and *.symtypes
  kbuild: refactor part-of-module
  kbuild: refactor quiet_modtag
  kbuild: remove redundant quiet_modtag for $(obj-m)
  kbuild: refactor Makefile.asm-generic
  user/Makefile: Fix typo and capitalization in comment section
  ...
2018-12-29 12:03:17 -08:00
Masahiro Yamada 2c667d77fc treewide: add intermediate .s files to targets
Avoid unneeded recreation of these in the incremental build.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-23 10:12:08 +09:00
Masahiro Yamada 4d4b5c2e3b treewide: remove explicit rules for *offsets.s
These explicit rules are unneeded because scripts/Makefile.build
provides a pattern rule to create %.s from %.c

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-23 10:12:03 +09:00
Daniel T. Lee d59dd69d55 samples: bpf: fix: seg fault with NULL pointer arg
When NULL pointer accidentally passed to write_kprobe_events,
due to strlen(NULL), segmentation fault happens.
Changed code returns -1 to deal with this situation.

Bug issued with Smatch, static analysis.

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-03 23:58:03 +01:00
Matteo Croce dc378a1ab5 samples: bpf: get ifindex from ifname
Find the ifindex with if_nametoindex() instead of requiring the
numeric ifindex.

Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-30 22:06:41 -08:00
Matteo Croce d606ee5c1d samples: bpf: improve xdp1 example
Store only the total packet count for every protocol, instead of the
whole per-cpu array.
Use bpf_map_get_next_key() to iterate the map, instead of looking up
all the protocols.

Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-30 22:06:41 -08:00
Daniel T. Lee 5a86381321 samples: bpf: fix: error handling regarding kprobe_events
Currently, kprobe_events failure won't be handled properly.
Due to calling system() indirectly to write to kprobe_events,
it can't be identified whether an error is derived from kprobe or system.

    // buf = "echo '%c:%s %s' >> /s/k/d/t/kprobe_events"
    err = system(buf);
    if (err < 0) {
        printf("failed to create kprobe ..");
        return -1;
    }

For example, running ./tracex7 sample in ext4 partition,
"echo p:open_ctree open_ctree >> /s/k/d/t/kprobe_events"
gets 256 error code system() failure.
=> The error comes from kprobe, but it's not handled correctly.

According to man of system(3), it's return value
just passes the termination status of the child shell
rather than treating the error as -1. (don't care success)

Which means, currently it's not working as desired.
(According to the upper code snippet)

    ex) running ./tracex7 with ext4 env.
    # Current Output
    sh: echo: I/O error
    failed to open event open_ctree

    # Desired Output
    failed to create kprobe 'open_ctree' error 'No such file or directory'

The problem is, error can't be verified whether from child ps
or system. But using write() directly can verify the command
failure, and it will treat all error as -1. So I suggest using
write() directly to 'kprobe_events' rather than calling system().

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-23 22:39:09 +01:00
Yonghong Song 9ce6ae22c8 tools/bpf: do not use pahole if clang/llvm can generate BTF sections
Add additional checks in tools/testing/selftests/bpf and
samples/bpf such that if clang/llvm compiler can generate
BTF sections, do not use pahole.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-20 10:54:39 -08:00
Shannon Nelson bce6a14996 bpf_load: add map name to load_maps error message
To help when debugging bpf/xdp load issues, have the load_map()
error message include the number and name of the map that
failed.

Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-07 22:34:54 +01:00
Bo YU 20cdeb5408 bpf, tracex3_user: erase "ARRAY_SIZE" redefined
There is a warning when compiling bpf sample programs in sample/bpf:

  make -C /home/foo/bpf/samples/bpf/../../tools/lib/bpf/ RM='rm -rf' LDFLAGS= srctree=/home/foo/bpf/samples/bpf/../../ O=
    HOSTCC  /home/foo/bpf/samples/bpf/tracex3_user.o
  /home/foo/bpf/samples/bpf/tracex3_user.c:20:0: warning: "ARRAY_SIZE" redefined
   #define ARRAY_SIZE(x) (sizeof(x) / sizeof(*(x)))

  In file included from /home/foo/bpf/samples/bpf/tracex3_user.c:18:0:
  ./tools/testing/selftests/bpf/bpf_util.h:48:0: note: this is the location of the previous definition
   # define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))

Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-04 16:31:57 +02:00
Roman Gushchin 5fcbd29b37 samples/bpf: extend test_cgrp2_attach2 test to use per-cpu cgroup storage
This commit extends the test_cgrp2_attach2 test to cover per-cpu
cgroup storage. Bpf program will use shared and per-cpu cgroup
storages simultaneously, so a better coverage of corresponding
core code will be achieved.

Expected output:
  $ ./test_cgrp2_attach2
  Attached DROP prog. This ping in cgroup /foo should fail...
  ping: sendmsg: Operation not permitted
  Attached DROP prog. This ping in cgroup /foo/bar should fail...
  ping: sendmsg: Operation not permitted
  Attached PASS prog. This ping in cgroup /foo/bar should pass...
  Detached PASS from /foo/bar while DROP is attached to /foo.
  This ping in cgroup /foo/bar should fail...
  ping: sendmsg: Operation not permitted
  Attached PASS from /foo/bar and detached DROP from /foo.
  This ping in cgroup /foo/bar should pass...
  ### override:PASS
  ### multi:PASS

Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-01 16:18:33 +02:00
Prashant Bhole 32c0097983 samples/bpf: fix compilation failure
following commit:
commit d58e468b11 ("flow_dissector: implements flow dissector BPF hook")
added struct bpf_flow_keys which conflicts with the struct with
same name in sockex2_kern.c and sockex3_kern.c

similar to commit:
commit 534e0e52bc ("samples/bpf: fix a compilation failure")
we tried the rename it "flow_keys" but it also conflicted with struct
having same name in include/net/flow_dissector.h. Hence renaming the
struct to "flow_key_record". Also, this commit doesn't fix the
compilation error completely because the similar struct is present in
sockex3_kern.c. Hence renaming it in both files sockex3_user.c and
sockex3_kern.c

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-21 22:51:16 +02:00
Yonghong Song 534e0e52bc samples/bpf: fix a compilation failure
samples/bpf build failed with the following errors:

  $ make samples/bpf/
  ...
  HOSTCC  samples/bpf/sockex3_user.o
  /data/users/yhs/work/net-next/samples/bpf/sockex3_user.c:16:8: error: redefinition of ‘struct bpf_flow_keys’
   struct bpf_flow_keys {
          ^
  In file included from /data/users/yhs/work/net-next/samples/bpf/sockex3_user.c:4:0:
  ./usr/include/linux/bpf.h:2338:9: note: originally defined here
    struct bpf_flow_keys *flow_keys;
           ^
  make[3]: *** [samples/bpf/sockex3_user.o] Error 1

Commit d58e468b11 ("flow_dissector: implements flow dissector BPF hook")
introduced struct bpf_flow_keys in include/uapi/linux/bpf.h and hence
caused the naming conflict with samples/bpf/sockex3_user.c.

The fix is to rename struct bpf_flow_keys in samples/bpf/sockex3_user.c
to flow_keys to avoid the conflict.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-18 17:50:02 +02:00
YueHaibing 664e787845 samples/bpf: remove duplicated includes
Remove duplicated includes.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-18 17:49:33 +02:00
Prashant Bhole 11c3f51136 samples/bpf: xdpsock, minor fixes
- xsks_map size was fixed to 4, changed it MAX_SOCKS
- Remove redundant definition of MAX_SOCKS in xdpsock_user.c
- In dump_stats(), add NULL check for xsks[i]

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-01 01:36:08 +02:00
Nikita V. Shirokov acb4ea9564 bpf: add TCP_SAVE_SYN/TCP_SAVED_SYN sample program
Sample program which shows TCP_SAVE_SYN/TCP_SAVED_SYN usage example:
bpf program which is doing TOS/TCLASS reflection (server would reply
with a same TOS/TCLASS as client).

Signed-off-by: Nikita V. Shirokov <tehnerd@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-01 01:36:04 +02:00
Björn Töpel 58c50ae4a0 samples/bpf: add -c/--copy -z/--zero-copy flags to xdpsock
The -c/--copy -z/--zero-copy flags enforces either copy or zero-copy
mode.

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-08-29 12:25:53 -07:00
Jesper Dangaard Brouer 817b89beb9 samples/bpf: all XDP samples should unload xdp/bpf prog on SIGTERM
It is common XDP practice to unload/deattach the XDP bpf program,
when the XDP sample program is Ctrl-C interrupted (SIGINT) or
killed (SIGTERM).

The samples/bpf programs xdp_redirect_cpu and xdp_rxq_info,
forgot to trap signal SIGTERM (which is the default signal used
by the kill command).

This was discovered by Red Hat QA, which automated scripts depend
on killing the XDP sample program after a timeout period.

Fixes: fad3917e36 ("samples/bpf: add cpumap sample program xdp_redirect_cpu")
Fixes: 0fca931a6f ("samples/bpf: program demonstrating access to xdp_rxq_info")
Reported-by: Jean-Tsung Hsiao <jhsiao@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-16 21:55:32 +02:00
Linus Torvalds 9a76aba02a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   - Gustavo A. R. Silva keeps working on the implicit switch fallthru
     changes.

   - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
     Luca Coelho.

   - Re-enable ASPM in r8169, from Kai-Heng Feng.

   - Add virtual XFRM interfaces, which avoids all of the limitations of
     existing IPSEC tunnels. From Steffen Klassert.

   - Convert GRO over to use a hash table, so that when we have many
     flows active we don't traverse a long list during accumluation.

   - Many new self tests for routing, TC, tunnels, etc. Too many
     contributors to mention them all, but I'm really happy to keep
     seeing this stuff.

   - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.

   - Lots of cleanups and fixes in L2TP code from Guillaume Nault.

   - Add IPSEC offload support to netdevsim, from Shannon Nelson.

   - Add support for slotting with non-uniform distribution to netem
     packet scheduler, from Yousuk Seung.

   - Add UDP GSO support to mlx5e, from Boris Pismenny.

   - Support offloading of Team LAG in NFP, from John Hurley.

   - Allow to configure TX queue selection based upon RX queue, from
     Amritha Nambiar.

   - Support ethtool ring size configuration in aquantia, from Anton
     Mikaev.

   - Support DSCP and flowlabel per-transport in SCTP, from Xin Long.

   - Support list based batching and stack traversal of SKBs, this is
     very exciting work. From Edward Cree.

   - Busyloop optimizations in vhost_net, from Toshiaki Makita.

   - Introduce the ETF qdisc, which allows time based transmissions. IGB
     can offload this in hardware. From Vinicius Costa Gomes.

   - Add parameter support to devlink, from Moshe Shemesh.

   - Several multiplication and division optimizations for BPF JIT in
     nfp driver, from Jiong Wang.

   - Lots of prepatory work to make more of the packet scheduler layer
     lockless, when possible, from Vlad Buslov.

   - Add ACK filter and NAT awareness to sch_cake packet scheduler, from
     Toke Høiland-Jørgensen.

   - Support regions and region snapshots in devlink, from Alex Vesker.

   - Allow to attach XDP programs to both HW and SW at the same time on
     a given device, with initial support in nfp. From Jakub Kicinski.

   - Add TLS RX offload and support in mlx5, from Ilya Lesokhin.

   - Use PHYLIB in r8169 driver, from Heiner Kallweit.

   - All sorts of changes to support Spectrum 2 in mlxsw driver, from
     Ido Schimmel.

   - PTP support in mv88e6xxx DSA driver, from Andrew Lunn.

   - Make TCP_USER_TIMEOUT socket option more accurate, from Jon
     Maxwell.

   - Support for templates in packet scheduler classifier, from Jiri
     Pirko.

   - IPV6 support in RDS, from Ka-Cheong Poon.

   - Native tproxy support in nf_tables, from Máté Eckl.

   - Maintain IP fragment queue in an rbtree, but optimize properly for
     in-order frags. From Peter Oskolkov.

   - Improvde handling of ACKs on hole repairs, from Yuchung Cheng"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
  bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
  hv/netvsc: Fix NULL dereference at single queue mode fallback
  net: filter: mark expected switch fall-through
  xen-netfront: fix warn message as irq device name has '/'
  cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
  net: dsa: mv88e6xxx: missing unlock on error path
  rds: fix building with IPV6=m
  inet/connection_sock: prefer _THIS_IP_ to current_text_addr
  net: dsa: mv88e6xxx: bitwise vs logical bug
  net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
  ieee802154: hwsim: using right kind of iteration
  net: hns3: Add vlan filter setting by ethtool command -K
  net: hns3: Set tx ring' tc info when netdev is up
  net: hns3: Remove tx ring BD len register in hns3_enet
  net: hns3: Fix desc num set to default when setting channel
  net: hns3: Fix for phy link issue when using marvell phy driver
  net: hns3: Fix for information of phydev lost problem when down/up
  net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
  net: hns3: Add support for serdes loopback selftest
  bnxt_en: take coredump_record structure off stack
  ...
2018-08-15 15:04:25 -07:00
Linus Torvalds e026bcc561 Kbuild updates for v4.19
- verify depmod is installed before modules_install
 
 - support build salt in case build ids must be unique between builds
 
 - allow users to specify additional host compiler flags via HOST*FLAGS,
   and rename internal variables to KBUILD_HOST*FLAGS
 
 - update buildtar script to drop vax support, add arm64 support
 
 - update builddeb script for better debarch support
 
 - document the pit-fall of if_changed usage
 
 - fix parallel build of UML with O= option
 
 - make 'samples' target depend on headers_install to fix build errors
 
 - remove deprecated host-progs variable
 
 - add a new coccinelle script for refcount_t vs atomic_t check
 
 - improve double-test coccinelle script
 
 - misc cleanups and fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbdFZ0AAoJED2LAQed4NsGcHYP/23txxk3GRP7O4UkfPw9Rtky
 MHiXTgcoy2vbG+l12BgzWX+qFii8XTUe3dQtK4HnGQFUIBtEBV/hpZPJtxfgGSev
 Zou5cv1kr5rNzTkCn//TG3O6/WIkTBCe2hahDCtmGDI3kd/cPK4dHbU/q6KpaqIJ
 qzZYBXIvCeu2GM8idQoCRrwdMpgu1pBz1gz2sDje1yHH2toI7T6cXHRLQDgx+HPq
 LIP7W9GUsoDdXjecvPD51LiW89E6BUxETBh5Ft9r9uzwB5ylQQMcw6Qyu2DiYDUX
 PPsHCMiolYV+Ttcy+vj/67KOvKmEaFotssck+RD/xDCF17zKhRkup+YM8kPLHTVZ
 TcAUZadbnT6U/s2W6GFwvVbN/P7cc3aif+aNCC/Pl23yagp3pydlSCocYxQgiVR7
 /rx48haYDEgu/MJ1X0dOpSO0ErY7zu2OoAlNerW+D9QizwbP+WtZO/CJH8SxQRuN
 dQ1xmyNrie+ODgi9tbc4eBrsb+1rioX927TP5MbJcfXt5CTsxDmIqop5XwyYIoQN
 ZWWlzC8Ii3P2trAVpBgM2IEbngSxwr6T9Wbf1ScJnPKr/o1rq+pBk49cYstTz3kQ
 OwJ8gPwUrkW4R+hlD7L6mL/WcrKzZBQS0Ij1QW2kVSEhRrsKo99psE1/rGehnHu9
 KGB0LYYCqGSOHR4zOjg0
 =VjfG
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - verify depmod is installed before modules_install

 - support build salt in case build ids must be unique between builds

 - allow users to specify additional host compiler flags via HOST*FLAGS,
   and rename internal variables to KBUILD_HOST*FLAGS

 - update buildtar script to drop vax support, add arm64 support

 - update builddeb script for better debarch support

 - document the pit-fall of if_changed usage

 - fix parallel build of UML with O= option

 - make 'samples' target depend on headers_install to fix build errors

 - remove deprecated host-progs variable

 - add a new coccinelle script for refcount_t vs atomic_t check

 - improve double-test coccinelle script

 - misc cleanups and fixes

* tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
  coccicheck: return proper error code on fail
  Coccinelle: doubletest: reduce side effect false positives
  kbuild: remove deprecated host-progs variable
  kbuild: make samples really depend on headers_install
  um: clean up archheaders recipe
  kbuild: add %asm-generic to no-dot-config-targets
  um: fix parallel building with O= option
  scripts: Add Python 3 support to tracing/draw_functrace.py
  builddeb: Add automatic support for sh{3,4}{,eb} architectures
  builddeb: Add automatic support for riscv* architectures
  builddeb: Add automatic support for m68k architecture
  builddeb: Add automatic support for or1k architecture
  builddeb: Add automatic support for sparc64 architecture
  builddeb: Add automatic support for mips{,64}r6{,el} architectures
  builddeb: Add automatic support for mips64el architecture
  builddeb: Add automatic support for ppc64 and powerpcspe architectures
  builddeb: Introduce functions to simplify kconfig tests in set_debarch
  builddeb: Drop check for 32-bit s390
  builddeb: Change architecture detection fallback to use dpkg-architecture
  builddeb: Skip architecture detection when KBUILD_DEBARCH is set
  ...
2018-08-15 12:09:03 -07:00
David S. Miller c1617fb4c5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2018-08-13

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add driver XDP support for veth. This can be used in conjunction with
   redirect of another XDP program e.g. sitting on NIC so the xdp_frame
   can be forwarded to the peer veth directly without modification,
   from Toshiaki.

2) Add a new BPF map type REUSEPORT_SOCKARRAY and prog type SK_REUSEPORT
   in order to provide more control and visibility on where a SO_REUSEPORT
   sk should be located, and the latter enables to directly select a sk
   from the bpf map. This also enables map-in-map for application migration
   use cases, from Martin.

3) Add a new BPF helper bpf_skb_ancestor_cgroup_id() that returns the id
   of cgroup v2 that is the ancestor of the cgroup associated with the
   skb at the ancestor_level, from Andrey.

4) Implement BPF fs map pretty-print support based on BTF data for regular
   hash table and LRU map, from Yonghong.

5) Decouple the ability to attach BTF for a map from the key and value
   pretty-printer in BPF fs, and enable further support of BTF for maps for
   percpu and LPM trie, from Daniel.

6) Implement a better BPF sample of using XDP's CPU redirect feature for
   load balancing SKB processing to remote CPU. The sample implements the
   same XDP load balancing as Suricata does which is symmetric hash based
   on IP and L4 protocol, from Jesper.

7) Revert adding NULL pointer check with WARN_ON_ONCE() in __xdp_return()'s
   critical path as it is ensured that the allocator is present, from Björn.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-13 10:07:23 -07:00
David S. Miller 6a92ef08a1 Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/net 2018-08-11 17:52:00 -07:00
Jesper Dangaard Brouer 1bca4e6b18 samples/bpf: xdp_redirect_cpu load balance like Suricata
This implement XDP CPU redirection load-balancing across available
CPUs, based on the hashing IP-pairs + L4-protocol.  This equivalent to
xdp-cpu-redirect feature in Suricata, which is inspired by the
Suricata 'ippair' hashing code.

An important property is that the hashing is flow symmetric, meaning
that if the source and destination gets swapped then the selected CPU
will remain the same.  This is helps locality by placing both directions
of a flows on the same CPU, in a forwarding/routing scenario.

The hashing INITVAL (15485863 the 10^6th prime number) was fairly
arbitrary choosen, but experiments with kernel tree pktgen scripts
(pktgen_sample04_many_flows.sh +pktgen_sample05_flow_per_thread.sh)
showed this improved the distribution.

This patch also change the default loaded XDP program to be this
load-balancer.  As based on different user feedback, this seems to be
the expected behavior of the sample xdp_redirect_cpu.

Link: https://github.com/OISF/suricata/commit/796ec08dd7a63
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-10 16:07:49 +02:00