Commit Graph

47 Commits

Author SHA1 Message Date
Thierry Reding 62a4e6824e ARM: tegra: Enable XUSB controller in defconfig
Enable the XUSB pad controller and XUSB controller (implementing an XHCI
interface) in the Tegra default configuration.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-29 18:13:51 +02:00
Marcel Ziswiler 716d81e350 ARM: tegra: Update default configuration
Update the Tegra default configuration for the following features:

  - expose hardware/virtual IRQ mapping via debugfs
  - WM9712 audio/touch controller as found on Colibri T20
  - sysfs interface for GPIOs
  - NFS client support for NFS version 4

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-09-15 11:14:47 +02:00
Thierry Reding 241e077b56 ARM: tegra: Rebuild default configuration on v4.3-rc1
As a result of rebuilding the configuration the following symbols are
removed:

  - EXT4_FS: ext3 has finally been removed from the kernel. ext4
    provides feature parity and can be used to mount ext3 filesystems.
    EXT3_FS selects EXT4_FS.
  - EXT3_DEFAULTS_TO_ORDERED: Removed as part of the ext3 filesystem
    removal.
  - IPV6: IPv6 is now built-in by default

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-09-15 11:10:48 +02:00
Tuomas Tynkkynen 461cfe4e2f ARM: tegra: Update default configuration
* CPU frequency scaling for Tegra124
  * Nouveau (for GK20A GPU) support

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-14 16:25:59 +02:00
Thierry Reding 5f9c2187d6 ARM: tegra: Update default configuration
Changes contributed by Marcel Ziswiler <marcel.ziswiler@toradex.com>:

  Enable HDA to support audio over HDMI and codecs connected to the HDA
  controller (needed by the Toradex Apalis Tegra30 Evaluation Board):
  - SND_HDA
  - SND_HDA_TEGRA
  - SND_HDA_INPUT_BEEP
  - SND_HDA_INPUT_JACK
  - SND_HDA_PATCH_LOADER
  - SND_HDA_CODEC_REALTEK
  - SND_HDA_CODEC_HDMI
  - SND_HDA_GENERIC

  Enable watchdog support:
  - WATCHDOG
  - TEGRA_WATCHDOG

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-05 14:20:16 +02:00
Thierry Reding fe07e48964 ARM: tegra: Regenerate defconfig based on v3.19-rc1
Removes the following entries from the default configuration:

- PM: enabled by default (via PM_SLEEP -> SUSPEND)
- RESOURCE_COUNTERS: removed

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-06 14:10:57 +01:00
Rafael J. Wysocki 464ed18ebd PM: Eliminate CONFIG_PM_RUNTIME
Having switched over all of the users of CONFIG_PM_RUNTIME to use
CONFIG_PM directly, turn the latter into a user-selectable option
and drop the former entirely from the tree.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
2014-12-19 22:55:06 +01:00
Thierry Reding fd1b0f5b62 ARM: tegra: Regenerate default configuration
This patch was generated by running 'make tegra_defconfig' followed by
'make savedefconfig' with the v3.18-rc1 tag checked out. Two values go
away: CONFIG_SCSI is selected by CONFIG_ATA and CONFIG_SCSI_MULTI_LUN
was removed.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-21 10:50:38 +01:00
Arnd Bergmann 413cb0036c ARM: tegra: tegra_defconfig changes for 3.18
Support is enabled for Venice2's touchpad, and Tegra124's AHCI (SATA)
 controller, as used on Jetson TK1.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUGxqvAAoJEMzrak5tbycx4+wP/idwSloMKvyBv5sH54sXvAhW
 eBnB8cVfqHpxvHrlitJd7QPdacISiwMs3v4lY+QIrxhKP8vJqGQF2uT/JjE5NPxs
 tfOMoUStrcdeuvFpHOS3vWMGvMlERVdRcnrt35g+EtOlQnQWuENUOVR8J1J6sA/j
 FAwY8VbGH1Onve0OO/aeXCvJAHqn6lI/UgM3VFlzceA4yWJ/BdJwu1aRtehV6kxz
 O1h9YM6JXOnhJ1BUE5dFyw1WFpH6Qg7IndgUR3SDpJvk4GfDAuNLzmW8DfYzBohY
 PxUV/DzM8nAtT7Uuaww/Bnr21bR1jmj2NQ82UC795AIpMBbMmX9+Zr3WHmMEsdNu
 Jj8uFYvAXCU/0r8kF/M9PF4PZcmkUD6fsESrYkqTPPNaVNSgXJviQTzu/ayBrixm
 EYSJdwr7DDxz7fkV6OaddXOt/dcwH8sOEi7wG0SFZTvCDLGVGcXK2J9FgULH9fMg
 vJt/p4/FDmUbzhBWXN9tseIMUatnRXoic0YMFXde6CLWCM/aZG3ZIkAa5usVTnTF
 BgytcX6tcg+melHeMiylBi1BfxT6UdjJVI/djQC96ykRdM8OIKRDgTtXKczT+0Rh
 XGlbE0JP2TxteOlB6TTBV1s5bQiZxChBGxrEduJx50dxLi79zB3rPPmoloqDn+xo
 ituxm3nNSpDIpi+mLFjm
 =cO5m
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.18-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/defconfig

Pull "ARM: tegra: tegra_defconfig changes for 3.18" from Stephen Warren:

Support is enabled for Venice2's touchpad, and Tegra124's AHCI (SATA)
controller, as used on Jetson TK1.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'tegra-for-3.18-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ARM: tegra: enable Atmel touchpad in defconfig
  ARM: tegra: Add options for Tegra AHCI support to tegra_defconfig

Contains an update to 3.17-rc2.
2014-09-25 17:55:25 +02:00
Mark Brown 4b86a33b5c ARM: configs: Remove REGULATOR_VIRTUAL_CONSUMER from defconfigs
The virtual consumer is a test device intended to be used while developing
regulator drivers, it should never be used in production. Remove it from
all defconfigs to avoid confusion among users.

Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Matt Porter <mporter@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-04 22:07:52 +02:00
Stephen Warren b82daf87a8 ARM: tegra: enable Atmel touchpad in defconfig
This driver is used on Venice2 for the touchpad.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-09-03 09:11:08 -06:00
Mikko Perttunen 91816a7fe5 ARM: tegra: Add options for Tegra AHCI support to tegra_defconfig
This adds ATA, SATA_AHCI and AHCI_TEGRA support to tegra_defconfig
so that the SATA support will be automatically enabled.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-08-26 11:35:24 -06:00
Marcel Ziswiler dff15d4c2b ARM: tegra: enable igb, stmpe, i2c chardev, lm95245, pwm leds
The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 or
i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, I2C
buses and PWM LEDs generically accessible from user space and an
LM95245 temperature sensor chip. The later four can also be found on
the Colibri T30 module.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
[swarren, dropped chunk contained in previous commit that rebuilt the
defconfig file]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-06-16 12:55:49 -06:00
Stephen Warren 26c9d2e15c ARM: tegra: rebuild tegra_defconfig
Run "make tegra_defconfig; make savedefconf" on v3.16-rc1. This allows
other people to do the same thing to adjust the defconfig file without
their patch bringing in a bunch of irrelevant diffs.

All of the removed options either have been removed from Kconfig, or
are now default y.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-06-16 12:02:10 -06:00
Stephen Warren 9956dcc5d1 ARM: tegra: tegra_defconfig updates
AT24C EEPROM:

This is used for the board ID EEPROM on Jetson TK1, as well as likely
a whole slew of other NVIDIA reference boards; we simply haven't added
enabled the EEPROM in the DT files until now.

MTD_SPI_NOR:

This defconfig contains the CONFIG_M25P80 symbol, which is now
dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy
the new dependency.

FRAMEBUFFER_CONSOLE_ROTATION:

Needed for devices like Tegra Note 7 and NVIDIA SHIELD to get the boot
console in the expected orientation.

CAN*, RTC_DRV_DS1307:

Toradex Colibri Evaluation Board uses the DS1307 RTC and the MCP251x CAN
controller. The NVIDIA Tegra 3 based Colibri T30 module can be used on
this carrier board.

Furthermore the NVIDIA Tegra 3 based Apalis T30 module too contains two
MCP251x CAN controllers.

INPUT_JOYDEV:

NVIDIA SHIELD embeds a USB joystick device.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-05-14 09:55:44 -06:00
Linus Torvalds 930b440cd8 ARM: SoC: board changes
As we continue to replace board files with device tree descriptions,
 this part of the ARM support is getting smaller. We have basically just
 defconfig changes here this time, and a significant number of Renesas
 shmobile changes, as Renesas is still in the process of deprecating
 board file support.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUz/yW2CrR//JCVInAQIHjxAAqQzkWa8SN2u0jwEgW2B+BI3wqiAn6MWm
 fI4aAfQbDgwmKaHfNvx3u3H9eI/0Qe6C2RXS/iBTOWr5VtjTYHetZ/ksvxmRUk8H
 dn/6V1nxbG4eh3yw699RaNeu0TduxU/SOzZuNo7J/+tvKwupgl/ydyvB8+QH8VMH
 YtIjZu7xAmX1T4NoWePZBOhmvOMlk7MVGnCveECA8tIbfoquyb4kBD3hjmwHjdD3
 iwTvmwjMBAs/LBW7HAPTz4CqLFrl50dO15oMRWkESgoBlQjelUT/26D+I7bl5ej9
 WhU6EO8vZ6F9OAfc3snOZVEvLiudfOY0a/DhQuB8etZideD2AGvsZcNngEaB450s
 lkYGjUgh5KWqJKw/gD5K+HjUnI7D8bn32c/mUYpzgQV0cbKpda1ZXyf/lNv+XAsQ
 nscvpWMQg7oV8JG7SnW189ytMRRy6axfYFX3Sh+3XLj18PPX4wNgKjRdgw8bRA/h
 wRb54pAfEaasqNU9MXw75hAwQn6Kmt2CFLfpV0Zd2yWXvvCxLoKIqH1+G1k3qIH2
 niuGFvtWmYwvc/X3CVs7mFPT7Ls24C/D7slChs5bm/UvJN3ukpJBJ9OoHAyD5idR
 Ufn/PQHRMDDqDVELyHEp7xq2+2ErrE/xbl/XyerZY2qufAIsfUG9Z/7B0GDYifqp
 bYrzBQa/MGs=
 =q7Vc
 -----END PGP SIGNATURE-----

Merge tag 'boards-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC board changes from Arnd Bergmann:
 "As we continue to replace board files with device tree descriptions,
  this part of the ARM support is getting smaller.  We have basically
  just defconfig changes here this time, and a significant number of
  Renesas shmobile changes, as Renesas is still in the process of
  deprecating board file support"

* tag 'boards-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits)
  ARM: enable fhandle in multi_v7_defconfig
  ARM: tegra: enable fhandle in tegra_defconfig
  ARM: update multi_v7_defconfig for Tegra
  ARM: add Marvell Dove and some drivers to multi_v7 defconfig
  ARM: fix duplicate symbols in multi_v5_defconfig
  ARM: pxa: add gpio keys information
  ARM: tegra: defconfig updates
  ARM: config: keystone: enable AEMIF/NAND support
  ARM: qcom: Enable basic support for Qualcomm platforms in multi_v7_defconfig
  ARM: kirkwood: Add HP T5325 devices to {multi|mvebu}_v5_defconfig
  ARM: config: Add mvebu_v5_defconfig
  ARM: config: Add a multi_v5_defconfig
  ARM: shmobile: r7s72100: update defconfig for I2C usage
  ARM: shmobile: Remove Lager DT reference legacy clock bits
  ARM: shmobile: Remove Koelsch DT reference legacy clock bits
  ARM: shmobile: Remove KZM9D board code
  ARM: mvebu: update defconfigs for Armada 375 and 38x
  ARM: dove: Enable watchdog support in the defconfig
  ARM: mvebu: Enable watchdog support in defconfig
  ARM: config: keystone: enable led support
  ...
2014-04-05 14:44:13 -07:00
Alexandre Courbot 38c5cbd78e ARM: tegra: enable fhandle in tegra_defconfig
CONFIG_FHANDLE is required by systemd >= 210 to spawn a serial TTY.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-26 23:19:23 +01:00
Laxman Dewangan d1c912c100 ARM: tegra: defconfig updates
- ams AS3722 is used as system PMIC for Tegra124 based Venice2.
- NXP PCA9546 is used in Cardhu Tegra30 board to connect to 3 cameras.
- GSPCA to support the webcam on Venice2.
- Allocate 64 MiB for CMA by default; the default 16MiB is not enough
  for the majority of use-cases. This can still be overridden by the cma
  command-line option.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Bryan Wu <pengw@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-03-03 10:41:24 -07:00
Stephen Warren 014325e933 ARM: tegra: add LED options back into tegra_defconfig
The last time tegra_defconfig was rebuilt, various LEDs options were
somehow selected by other options, and hence their entries in
tegra_defconfig were removed by "make savedefconfig". However, for some
reason this is no longer happening, so we need to add the entries back
into tegra_defconfig so the they are enabled in .config.

Fixes: db079b1811 ("ARM: tegra: rebuild tegra_defconfig to add DEBUG_FS)"
Reported-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-02-28 21:35:58 +01:00
Stephen Warren db079b1811 ARM: tegra: rebuild tegra_defconfig to add DEBUG_FS
DEBUG_FS used to be selected by COMMON_CLK_DEBUG, which was enabled
by tegra_defconfig. However, this config option no longer exists, so
no longer selects DEBUG_FS, and nothing else selects it either. So,
"make tegra_defconfig" no longer enables DEBUG_FS in .config.

Rebuild tegra_defconfig on top of next-20140424, while manually
re-enabling DEBUG_FS.

Reasons for removed entries are:
- I2C_MUX: selected by MEDIA_SUBDRV_AUTOSELECT
- DRM_PANEL: selected by DRM_TEGRA
- NEW_LEDS: selected by many things; at least VT
- LEDS_CLASS: selected by many things; at least VT
- LEDS_TRIGGERS: selected by many things; at least VT
- COMMON_CLK_DEBUG: no longer exists

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-01-31 14:58:54 -08:00
Linus Torvalds 0ba3307a8e ARM: driver updates for 3.14
Updates of SoC-near drivers and other driver updates that makes more sense to
 take through our tree.
 
 The largest part of this is a conversion of device registration for some
 renesas shmobile/sh devices over to use resources. This has required
 coordination with the corresponding arch/sh changes, and we've agreed
 to merge the arch/sh changes through our tree.
 
 Added in this branch is support for Trusted Foundations secure firmware,
 which is what is used on many of the commercial Nvidia Tegra products
 that are in the market, including the Nvidia Shield. The code is local
 to arch/arm at this time since it's uncertain whether it will be shared
 with arm64 longer-term, if needed we will refactor later.
 
 A couple of new RTC drivers used on ARM boards, merged through our tree
 on request by the RTC maintainer.
 
 ... plus a bunch of smaller updates across the board, gpio conversions
 for davinci, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJS4ViqAAoJEIwa5zzehBx3m4QP/07VXVE77RFRyly5Bky5AaMY
 zo7ZpoJyg/IT9lxtSAQDhbQq49tKZQVS16oJ7LWXzjAyCY9XrVDX2IkcuqudmYSy
 Xtx+R0jZGK4czqljgjwdHgNCSwugCmO/kgNY3h8ar53dTmGIFiq5boPeMDizRTGD
 g3sgYuQbIqepcHd2jUjJSBXNyvZIlwBJ4wDyZgxRfzyM7unS8T46BpYNJz0esAL+
 0DwIk0nv1eJ6LI0aEL+7bgFaitjUNLpcrroToi1IiIEJuTvZY4AuBjAKt5/181zL
 i1ugimsHahmbwNclAmUimc0rtW4Nn+YHGa8WpYiQ9O7+kPFsYkfLRplHPOjaUBPz
 r76ucgBMGH6i04tvstwlONznO4NhkACWmb4wrfJfRoDTglELLoOd6QGAYKyRublH
 SnrKKmuXzBvtmj2zgUU+S0ka9LdYrjzxoSYprrXQpDr89pUs/AZrlAm9yRjQ3hGw
 0eL9UsDFtYAQwCQtPvin2bjKRgNNDbgdwNYNbA7n8jvE/uZ4rlYr3Ot+oxdfs75e
 K4fY6JwtbZxQVcOU25M3WBYXLl0V61ZISFa16XhYC2hjzgMZ3bfmFUn+TW9C8V4V
 03QqtFyT3FP+VfA3QUS3PuBxALT0HWXmDqp0VJc6UCiXX2InWR+uZQp7a30EawOZ
 WHLqgf+nT3bD3kfagCZN
 =JJlw
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM driver updates from Olof Johansson:
 "Updates of SoC-near drivers and other driver updates that makes more
  sense to take through our tree.

  The largest part of this is a conversion of device registration for
  some renesas shmobile/sh devices over to use resources.  This has
  required coordination with the corresponding arch/sh changes, and
  we've agreed to merge the arch/sh changes through our tree.

  Added in this branch is support for Trusted Foundations secure
  firmware, which is what is used on many of the commercial Nvidia Tegra
  products that are in the market, including the Nvidia Shield.  The
  code is local to arch/arm at this time since it's uncertain whether it
  will be shared with arm64 longer-term, if needed we will refactor
  later.

  A couple of new RTC drivers used on ARM boards, merged through our
  tree on request by the RTC maintainer.

  ... plus a bunch of smaller updates across the board, gpio conversions
  for davinci, etc"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
  watchdog: davinci: rename platform driver to davinci-wdt
  tty: serial: Limit msm_serial_hs driver to platforms that use it
  mmc: msm_sdcc: Limit driver to platforms that use it
  usb: phy: msm: Move mach dependent code to platform data
  clk: versatile: fixup IM-PD1 clock implementation
  clk: versatile: pass a name to ICST clock provider
  ARM: integrator: pass parent IRQ to the SIC
  irqchip: versatile FPGA: support cascaded interrupts from DT
  gpio: davinci: don't create irq_domain in case of unbanked irqs
  gpio: davinci: use chained_irq_enter/chained_irq_exit API
  gpio: davinci: add OF support
  gpio: davinci: remove unused variable intc_irq_num
  gpio: davinci: convert to use irqdomain support.
  gpio: introduce GPIO_DAVINCI kconfig option
  gpio: davinci: get rid of DAVINCI_N_GPIO
  gpio: davinci: use {readl|writel}_relaxed() instead of __raw_*
  serial: sh-sci: Add OF support
  serial: sh-sci: Add device tree bindings documentation
  serial: sh-sci: Remove platform data mapbase and irqs fields
  serial: sh-sci: Remove platform data scbrr_algo_id field
  ...
2014-01-23 18:49:36 -08:00
Thierry Reding cb99fd6200 ARM: tegra: Enable DRM panel support
Enable DRM panel core support along with support for various simple
panels.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-19 13:08:21 -07:00
Alexandre Courbot f47d41acfd ARM: tegra: support Trusted Foundations by default
Support for Trusted Foundations is light and allows the kernel to run on
a wider range of devices, so enable it by default.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-13 12:50:31 -07:00
Stephen Warren 0d8c67218c ARM: tegra: tegra_defconfig updates
Add some features to tegra_defconfig:
* Tegra+MAX98090 audio machine driver, as used on the Venice2 board.
* AMX3722 PMIC, as used on the Venice2 board.
* ChromeOS embedded controller, for the Venice2 keyboard.

Also, rebuild tegra_defconfig on a more recent kernel (3.13-rc1) to
minimize irrelevant diffs showing up when people edit the file.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-13 12:35:50 -07:00
Stephen Warren 83c6ca5321 ARM: tegra: defconfig updates
ARCH_TEGRA_124_SOC: Tegra124 SoC support.
CPU_FREQ_STAT_DETAILS: Enables various sysfs files that are useful when
    testing cpufreq.
CONFIG_COMMON_CLK_DEBUG: Useful to look at the clock tree to verify that
    clocks for the various devices have been properly set up.
PINCTRL_PALMAS: Used on Dalmore board.
NEON: Enables SIMD instruction support for Tegra30 and later SoCs.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-08 14:00:22 -06:00
Linus Torvalds 44598f98b9 ARM: SoC board updates for 3.12
Board updates for 3.12. Again, a bit of domain overlap with SoC and DT branches,
 but most of this is around legacy code and board support. We've found that
 platform maintainers have a hard time separating all of these out and might
 move towards fewer branches for next release.
 
 - Removal of a number of Marvell Kirkwood board files, since contents
   is now common and mostly configured via DT.
 - Device-tree updates for Marvell Dove, including irqchip and clocksource
   setup.
 - Defconfig updates. Gotta go somewhere. One new one for Renesas Lager.
 - New backlight drivers for backlights used on Renesas shmobile platforms.
 - Removal of Renesas leds driver.
 - Shuffling of some of the new Broadcom platforms to give room for others in
   the same mach directory. More in 2.13.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKhrfAAoJEIwa5zzehBx3OOAQAJCWhoYaHvWmyAf+xCOQNpX2
 YgAngENW04VpHFOyn6BtoGv6+5JypdB2TmK3GHHlVJd1Im5mD1wgm8hAfgyV8lQ4
 UeJULdA2HZAstKeTirO65BIyUb5QIrWakF24ccfIfg2xeScM8FV0m8cmzeo3fYAf
 DmmeoSCmvTdu/cDWBNlsQZ/as8qCQwyF+5kZg+SMl1btA1Publu2I5lDE02TH46d
 sc5mN+ihw0JG62EJV7pov6uVyeFLExoTbrNfQZ4rixmKkMDS/jq5ZbBS5c0i8ULF
 s1UMSZtYTcUO9rAPv3+MOIc7fq7nKo9lLuwMrA1HHUEDJ2BEi8DIp99F+ZYm/MSL
 WpVxYNwOobPcMJBYGR2fy4GgpIyWB285GgrBUxcq7t0Xi4uBbptwjLhDE4d7LREV
 8guW251R+OEVPYcwFctsubnox0MViyC3CQ1FaAAdtTjpSKomlhk/yaxaQ9nGrxls
 QCZgXHWm4Ir3QYv8XfOn0X9vdP81EnX11SiwtrRSJ71QMs814nB8NdPDqU4VHsw8
 exKmqjq/Lt+F9Kpxn/FevNNuYOdefZNQi00yl3ERchdIGdvRwE/0yA0D69mpwIVr
 E41UwvH3g43vazCo2PMdWPWuFlpGMR3iZ4pXnDLH/w33ppfJWfokYwKSRQ/mu/MN
 LMjkwoZn1X+fZzNSh9/G
 =EGua
 -----END PGP SIGNATURE-----

Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC board updates from Olof Johansson:
 "Board updates for 3.12.  Again, a bit of domain overlap with SoC and
  DT branches, but most of this is around legacy code and board support.
  We've found that platform maintainers have a hard time separating all
  of these out and might move towards fewer branches for next release.

   - Removal of a number of Marvell Kirkwood board files, since contents
     is now common and mostly configured via DT.
   - Device-tree updates for Marvell Dove, including irqchip and
     clocksource setup.
   - Defconfig updates.  Gotta go somewhere.  One new one for Renesas
     Lager.
   - New backlight drivers for backlights used on Renesas shmobile
     platforms.
   - Removal of Renesas leds driver.
   - Shuffling of some of the new Broadcom platforms to give room for
     others in the same mach directory.  More in 3.13"

* tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits)
  mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_event
  mmc: sdhci-bcm-kona: Remove unneeded version.h inclusion
  ARM: bcm: Make secure API call optional
  ARM: DT: binding fixup to align with vendor-prefixes.txt (drivers)
  ARM: mmc: fix NONREMOVABLE test in sdhci-bcm-kona
  ARM: bcm: Rename board_bcm
  mmc: sdhci-bcm-kona: make linker-section warning go away
  ARM: tegra: defconfig updates
  ARM: dove: add initial DT file for Globalscale D2Plug
  ARM: dove: add GPIO IR receiver node to SolidRun CuBox
  ARM: dove: add common pinmux functions to DT
  ARM: dove: add cpu device tree node
  ARM: dove: update dove_defconfig with SI5351, PCI, and xHCI
  arch/arm/mach-kirkwood: Avoid using ARRAY_AND_SIZE(e) as a function argument
  ARM: kirkwood: fix DT building and update defconfig
  ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code
  ARM: configs: disable DEBUG_LL in bcm_defconfig
  ARM: bcm281xx: Board specific reboot code
  ARM bcm281xx: Turn on socket & network support.
  ARM: bcm281xx: Turn on L2 cache.
  ...
2013-09-06 13:34:43 -07:00
Linus Torvalds ae7a835cc5 Merge branch 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Gleb Natapov:
 "The highlights of the release are nested EPT and pv-ticketlocks
  support (hypervisor part, guest part, which is most of the code, goes
  through tip tree).  Apart of that there are many fixes for all arches"

Fix up semantic conflicts as discussed in the pull request thread..

* 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (88 commits)
  ARM: KVM: Add newlines to panic strings
  ARM: KVM: Work around older compiler bug
  ARM: KVM: Simplify tracepoint text
  ARM: KVM: Fix kvm_set_pte assignment
  ARM: KVM: vgic: Bump VGIC_NR_IRQS to 256
  ARM: KVM: Bugfix: vgic_bytemap_get_reg per cpu regs
  ARM: KVM: vgic: fix GICD_ICFGRn access
  ARM: KVM: vgic: simplify vgic_get_target_reg
  KVM: MMU: remove unused parameter
  KVM: PPC: Book3S PR: Rework kvmppc_mmu_book3s_64_xlate()
  KVM: PPC: Book3S PR: Make instruction fetch fallback work for system calls
  KVM: PPC: Book3S PR: Don't corrupt guest state when kernel uses VMX
  KVM: x86: update masterclock when kvmclock_offset is calculated (v2)
  KVM: PPC: Book3S: Fix compile error in XICS emulation
  KVM: PPC: Book3S PR: return appropriate error when allocation fails
  arch: powerpc: kvm: add signed type cast for comparation
  KVM: x86: add comments where MMIO does not return to the emulator
  KVM: vmx: count exits to userspace during invalid guest emulation
  KVM: rename __kvm_io_bus_sort_cmp to kvm_io_bus_cmp
  kvm: optimize away THP checks in kvm_is_mmio_pfn()
  ...
2013-09-04 18:15:06 -07:00
Stephen Warren 25819408cd ARM: tegra: defconfig updates
Enable:
* SYSVIPC (needed for some apps, e.g. fakeroot).
* Elantech touchpad (touchpad on AC100).
* SCSI_MULTI_LUN (needed for some USB SD card readers).
* PCI, MSI, and Tegra's PCIe driver.
* USB XHCI; useful for testing PCIe.

Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 15:14:44 -06:00
Stephen Warren 16a4b5ae32 ARM: tegra: defconfig updates
Enable some new features:
* The Tegra114 SPI controller, for Dalmore's SPI flash.
* Set all the GPIO leds triggers to their "if you don't know, say X"
  value, so there are some useful triggers for the gpio-leds support.
* TPS65090 charger, for Dalmore.
* ASoC RT5640 machine driver, for audio on Beaver and Dalmore.

Also, rebuild tegra_defconfig on top of linux-next. This should make it
easier to create future defconfig patches, without extraneous diffs.
This should introduce no changes; simply moving entries around due to
Kconfig ordering changes. The apparent exceptions are:

* AUTO_ZRELADDR: Selected by ARM multi-platform support.
* MTD_CHAR: Removed in Kconfig.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
[swarren, squashed various patches]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-06-12 15:01:57 -06:00
Alexandre Courbot 8d9849b051 ARM: tegra: defconfig fixes
The AK8975 Kconfig option was renamed during the 3.10 merge window.
Adjust tegra_defconfig to enable the new name, so it's not missing
useful features.

Tegra DRM support used to be enabled in the default Tegra configuration,
but it now depends on CONFIG_TEGRA_HOST1X which is disabled by default.
Enable CONFIG_TEGRA_HOST1X so that DRM support is compiled in again.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
[swarren, squashed Alex's and my changes together]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-20 23:50:34 -07:00
Stephen Warren e1eee65f1a ARM: tegra: defconfig updates
Update tegra_defconfig to:

* Enable CONFIG_ARCH_TEGRA_114_SOC.
* Enable various PMIC and related options for Tegra114 platforms Dalmore
  and pluto: Palmas, TPS51362, TPS65090.
* Enable KEYBOARD_GPIO, mainly as a suspend wakeup source.
* Rebuild tegra_defconfig based on v3.9-rc1, hence picking up various
  move/remove changes, and removing some entries for now-default or
  selected options.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-03 14:35:55 -06:00
Laxman Dewangan a05b0d505e ARM: tegra: defconfig updates
Add:
* RTC_DRV_TPS6586X to enable the RTC on many boards, such as Harmony
  and Ventana.
* POWER_RESET_GPIO to provide a power off driver for TrimSlice.
* Tegra KBC controller support, for Seaboard.
* Tegra high-speed UART driver, for Cardhu Bluetooth.
* kexec support.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28 10:51:07 -07:00
Stephen Warren 6254f95b7c ARM: tegra: defconfig updates
New options enabled:
* BRCMFMAC: wlan driver, enable as module.
* MTD, MTD_CHAR, MTD_M25P80, SPI_TEGRA20_SLINK, CONFIG_SPI_TEGRA20_SFLASH
  to enable serial flash on Cardhu and TrimSlice.
* PWM/backlight features for use with tegradrm.
* tegradrm; Tegra's new display driver.
* CMA, so that tegradrm can allocate large buffers.
* SquashFS, which is used as the root filesystem on boards based on
  the Tamonten processor module.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-15 15:22:12 -07:00
Linus Torvalds 84424026c0 ARM: soc: defconfig updates
This might be the last time we do a standalone defconfig branch,
 since we now prefer to get them with the rest of the subarch updates
 instead. These add a handful of useful options on various platforms,
 enable new boards and SoCs, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO4QAAoJEIwa5zzehBx31ZIQAIxJFxE+KLGYg8jaD5NZqZJ+
 z6y2EkZhHyIhgiH0RfQwsKeOiEQFh4QV3u5j0V+8ohbGTdAH00lvHZo8c2tAVTWT
 aU7AahEOnlvUqMG/Nw1FGOUH0WJbOzkzHxIwOdLEwLqUPP6wMaV75xGAXrKU3K15
 hyGsTXQalEat4wec7dTfpMs1YioZj8SOMhrlY8SLPJ4KD4Ql3c2pgT1SYyKERrGe
 wnzPoDIMZj7VXvLoKOrjZqaW69emYAgph4GleLSp/0/SgiMQh8NjicgYjAdyf2Rk
 KXFd5NHXF0WzgvWQr6xC8JEnlaittdWxVIZaEPOiNoDKDIvpXaWFfqRfF/40HJhI
 8ixUsLHDZxbw/ySxe9SZmTS+i2yBGej1znpRbsUnws8h8fN9Eoz9V8y0BWO0TxpW
 oThopAZTJxdpCXE9nKhk/Dau0oiW6t8FelUG1mIFleNSA2XW/SAeqWn5FW3PTxC1
 whNj01JvDH5JilynK8s/UkH1mfGyvJA3hsnL6AbgfsY605pWySDgzexDRWqbq+B1
 z/ZmVvN3mM+7ycM1AmL/tGArPtLdDVRwRo8eqBKZrAaHfW7g8WKbDoc4T7MVI0c1
 O7dIG+NMXIpZKbBOIXPliWdyBlQ56da3XF9iNaYav2mRMwUiqHTbaHakPJM89fBd
 qOsKCA1BcRQgJb/eE7rh
 =+zKc
 -----END PGP SIGNATURE-----

Merge tag 'defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc defconfig updates from Olof Johansson:
 "This might be the last time we do a standalone defconfig branch, since
  we now prefer to get them with the rest of the subarch updates
  instead.  These add a handful of useful options on various platforms,
  enable new boards and SoCs, etc."

* tag 'defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: tegra: defconfig updates
  ARM: LPC32xx: Defconfig update
  ARM: mach-shmobile: marzen: defconfig update
  ARM: mxs_defconfig: Add SPI and LRADC support
  ARM: s3c6400_defconfig: enable more boards in defconfig
  ARM: imx_v6_v7_defconfig: Remove CONFIG_DEFAULT_MMAP_MIN_ADDR
  ARM: imx_v6_v7_defconfig: Add Chipidea USB driver support
  ARM: mxs_defconfig: Add framebuffer support
  ARM: mxs_defconfig: Add LED, PWM and MTD_CHAR support
  ARM: mxs_defconfig: Enable USB host
2012-10-07 20:49:16 +09:00
Laxman Dewangan e2187b940f ARM: tegra: config: enable dmaengine based APB DMA driver
Enable config for dmaengine based Tegra APB DMA driver and
disable the legacy APB DMA driver (SYSTEM_DMA).

[swarren: removed CONFIG_TEGRA_SYSTEM_DMA not set line, since the option
is removed entirely in a later patch]

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-17 09:34:01 -06:00
Stephen Warren 9df25ccc93 ARM: tegra: defconfig updates
Removed:

* MACH_HARMONY
* MACH_PAZ00
* MACH_TRIMSLICE

  These used to enable board support for individual boards. Now that we
  only support device tree, these options have been removed.

Added:

* TEGRA_PCI

  This used to be selected by the board options above. Select this
  explicitly now that the board options have been removed.

* TEGRA_DEBUG_UART_AUTO_ODMDATA

  This makes the kernel automatically pick a UART for earlyprintk. It's
  likely to be a useful option for everyone.

* PWM
* PWM_TEGRA

  Enable the new PWM subsystem, and the Tegra driver within it.

* GPIO_PCA953X
* GPIO_PCA953X_IRQ
* MFD_MAX8907
* REGULATOR_MAX8907
* RTC_DRV_MAX8907
* RTC_DRV_TPS65910

  Various drivers required for the Whistler board.

* RTC_INTF_SYSFS
* RTC_INTF_PROC
* RTC_INTF_DEV

  Some RTC options that Kconfig help implies should typically be
  enabled.

* Wifi chip (rt3070)
* Bluetooth (btusb)
* Camera (uvcvideo)
* 3G modem (acm and wdm)
* rfkill
* GPIO LEDs
* NVEC

  Various devices and features found on PAZ00 boards.

  Some of these are enabled as modules because they are not needed for
  boot and will not be used on other boards. Wifi also needs to be
  module because of the firmware loader.

  The update also enabled support for the rfkill switch, the Wifi LED and
  the nvec power and led driver which got lost in the past.

* DEVTMPFS, TMPFS_POSIX_ACL

  These are mandatory on modern linux distros.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-11 13:51:42 -06:00
Linus Torvalds 3e701cdfe6 MFD bits for the 3.6 merge window.
We have support for a few new drivers:
 - Samsung s2mps11
 - Wolfson Microelectronics wm5102 and wm5110
 - Marvell 88PM800 and 88PM805
 - TI twl6041
 
 We also have our regular driver improvements:
 - Device tree and IRQ domain support for STE AB8500
 - Regmap and devm_* API conversion for TI tps6586x
 - Device tree support for Samsung max77686
 - devm_* API conversion for STE AB3100
 
 Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910,
 tps65090, da9052 and twl-core.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQFpGVAAoJEIqAPN1PVmxKFNoP/1dkYngrxxV6cxdyLJ74APhG
 lVKPgaDxQhdgfwCZJmMeZK1UphZo80cWnEXG6sTHZUEQdTaslSJu5SuPfUM+fo7e
 52/dU0nx0ZE04pwPQLHbidS4TmHlbLg9oM2kmIf9RO5rg34GodwVgRL/4+k1qvhz
 aWYJt9erFhQOpqaSX66mXHSuhvzHypbcE7d2B2Ykmh3NoYiH2w9H9KmIbbb+ZLq8
 +Bp/i5Ys/vfooo+8IE2w6KZfIzMwsmmtWjjr/38yuQJaKZCh/zn23DM9HsdrVf++
 RzfniRF4YBxmeKi7zi8MFIYys8filTCXA9dXbGSAKCuUCT37yZRnUxTeN1bn7Bux
 A7KRpG7pUKQKVKqCTndvK5LcQKlT33XyW2ZzV1wVWX2JkCJ+gilPeykb8IabNvGX
 nIp0STEGR/WdCLEAKo8pJF7Usn0RuUzAug02SG/mQ6dpnLoZqp0Od5W7gRhT7M7h
 hXr/xKJ6cG5YwicpAdy5kJJ0dRgQrtaHwxrF0B68AXZ7CmAtkPuEGCYhUCFnGQUH
 XJ0CodAqqVBRyYiQS4zIpIh2nqhIdsgv4OC1+kVLbubQk+PR88zG9Jvg6i1HQi/A
 OHi7N5Wite3YUrs3sBzDKnEc/Il2YRhVaz2SLVNfZR0PS7hywHN3rK/tVFINTgei
 jNEz1H6hu7ToNLfs0UzP
 =c28c
 -----END PGP SIGNATURE-----

Merge tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFD bits from Samuel Ortiz:
 "We have support for a few new drivers:
   - Samsung s2mps11
   - Wolfson Microelectronics wm5102 and wm5110
   - Marvell 88PM800 and 88PM805
   - TI twl6041

  We also have our regular driver improvements:
   - Device tree and IRQ domain support for STE AB8500
   - Regmap and devm_* API conversion for TI tps6586x
   - Device tree support for Samsung max77686
   - devm_* API conversion for STE AB3100

  Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910,
  tps65090, da9052 and twl-core."

Fix up mostly trivial conflicts, with the exception of
drivers/usb/host/ehci-omap.c in particular, which had some
re-organization of the reset sequence (commit 1a49e2ac9651: "EHCI:
centralize controller initialization") that clashed with commit
2761a63945 ("mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix
issues").

In particular, commit 2761a63945 moved the usb_add_hcd() to the
*middle* of the reset sequence, which clashes fairly badly with the
reset sequence re-organization (although it could have been done inside
the new omap_ehci_init() function).

I left that part of commit 2761a63945 just undone.

* tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (110 commits)
  mfd: Ensure AB8500 platform data is passed through db8500-prcmu to MFD Core
  mfd: Arizone core should select MFD_CORE
  mfd: Fix arizona-irq.c build by selecting REGMAP_IRQ
  mfd: Add debug trace on entering and leaving arizone runtime suspend
  mfd: Correct tps65090 cell names
  mfd: Remove gpio support from tps6586x core driver
  ARM: tegra: defconfig: Enable tps6586x gpio
  gpio: tps6586x: Add gpio support through platform driver
  mfd: Cache tps6586x register through regmap
  mfd: Use regmap for tps6586x register access.
  mfd: Use devm managed resources for tps6586x
  input: Add onkey support for 88PM80X PMIC
  mfd: Add support for twl6041
  mfd: Fix twl6040 revision information
  mfd: Matches should be NULL when populate anatop child devices
  input: ab8500-ponkey: Create AB8500 domain IRQ mapping
  mfd: Add missing out of memory check for pcf50633
  Documentation: Describe the AB8500 Device Tree bindings
  mfd: Add tps65910 32-kHz-crystal-input init
  mfd: Drop modifying mc13xxx driver's id_table in probe
  ...
2012-07-30 12:41:17 -07:00
Laxman Dewangan 05f3ad2b8a ARM: tegra: defconfig: Enable tps6586x gpio
Enable GPIO_TPS6586X as the gpio functionality of
this device moved as platform driver.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-25 00:39:31 +02:00
Stephen Warren dbebe1589d ARM: tegra: defconfig updates
Enable:
* SND_SOC_TEGRA_WM8753 (new feature)
* TPS65910 (Cardhu regulator)
* CONFIG_I2C_MUX (dependency of:)
* CONFIG_I2C_MUX_PINCTRL (for Seaboard)

Remove some deleted options:
* MACH_KAEN
* MACH_VENTANA
* MACH_WARIO

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-11 12:25:11 -06:00
Laxman Dewangan 06d96e1e6d ARM: tegra: update defconfig
New options enabled:
* REGULATOR_TPS62360: for Cardhu's CPU core
* MEMORY: dependency for TEGRA*_MC

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> # (parts)
Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> # (parts)
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-11 14:53:24 -06:00
Stephen Warren c6b556a539 ARM: tegra: update defconfig
New options enabled:
* RUNTIME_PM
* ISL29028 (light and proximity)
* INPUT_MPU3050 (gyro)
* BATTERY_SBS
* EM3027 RTC
* INPUT_MISC (dependency)
* POWER_SUPPLY (dependency)

The IIO option seems to have been moved recently too.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-27 12:21:17 -06:00
Stephen Warren 0a25893597 ARM: tegra: update defconfig
Refresh tegra_defconfig:

New options enabled:
* PERF_EVENTS
* Tegra EMC scaling
* Support for all 4 CPUs on Tegra30
* AUTO_ZRELADDR for unified Tegra20+Tegra30 images
* CPU_FREQ/CPU_IDLE
* BLK_DEV_SR
* INPUT_EVDEV
* Regulators, including fixed, GPIO, TPS6586x
* Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100)
* NVEC (staging, for Paz00/Toshiba AC100)
* IOMMU for Tegra20's GART and Tegra30's SMMU
* TEGRA_AES
* ext4, for trim support on SD/eMMC

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-07 14:38:49 -08:00
Olof Johansson 256a32eacf arm/tegra: refresh defconfig for tegra30
Update the defconfig for tegra due to the addition of tegra30 and rename
of t20/t30 options.

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Stephen Warren <swarren@nvidia.com>
2011-12-19 18:00:03 -08:00
Olof Johansson ecb7b0e33e ARM: tegra: update defconfig
Refresh tegra_defconfig:

New options enabled: RTC, SPI, USB and USB_STORAGE together with
corresponding tegra drivers. Also enable some of the common usb ethernet
adapters.

Enable Tegra ALSA/ASoC/sound support, including drivers for TrimSlice,
and WM8903-based platforms such as Harmony and Seaboard.

Finally, enable new merged boards (Ventana) and the generic devicetree board.

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Stephen Warren <swarren@nvidia.com>
2011-10-13 15:07:40 -07:00
Mike Rapoport 944d46b534 ARM: tegra: update defconfig
* Enable TPS6586x PMIC driver
* Enable RealTek 8169 used on TrimSlice
* Allow booting with root on NFS

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Olof Johansson <olof@lixom.net>
2011-03-15 14:28:34 -07:00
Olof Johansson c4d9e4a0b9 ARM: tegra: enable new drivers in defconfig
Enable new platforms and tegra drivers in tegra_defconfig. Also enable
some of the common devices several platforms, and GUID partition tables
to make it possible to boot a tegra_defconfig kernel with a ChromiumOS
filesystem.

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Stephen Warren <swarren@nvidia.com>
2011-03-07 15:44:35 -08:00
Olof Johansson f2b6133ffc ARM: tegra: add tegra_defconfig
Adding one single defconfig for the tegra family of boards, to over time
cover the superset of supported platform and drivers.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Colin Cross <ccross@android.com>
2011-02-10 17:50:42 -08:00