Commit Graph

34 Commits

Author SHA1 Message Date
Pavel Emelyanov b1e058da50 gfs2: make gfs2_holder.gh_owner_pid be a struct pid *
The gl_owner_pid field is used to get the holder task by its pid and check
whether the current is a holder, so make it in a proper manner, i.e.  via the
struct pid * manipulations.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:06 -08:00
Abhijith Das b4c20166dc [GFS2] flocks from same process trip kernel BUG at fs/gfs2/glock.c:1118!
This patch adds a new flag to the gfs2_holder structure GL_FLOCK.
It is set on holders of glocks representing flocks. This flag is
checked in add_to_queue() and a process is permitted to queue more
than one holder onto a glock if it is set. This solves the issue
of a process not being able to do multiple flocks on the same file.
Through a single descriptor, a process can now promote and demote
flocks. Through multiple descriptors a process can now queue
multiple flocks on the same file. There's still the problem of
a process deadlocking itself (because gfs2 blocking locks are not
interruptible) by queueing incompatible deadlock.

Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10 08:56:14 +01:00
Steven Whitehouse 8fbbfd214c [GFS2] Reduce number of gfs2_scand processes to one
We only need a single gfs2_scand process rather than the one
per filesystem which we had previously. As a result the parameter
determining the frequency of gfs2_scand runs becomes a module
parameter rather than a mount parameter as it was before.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10 08:55:08 +01:00
Abhijith Das d93cfa9884 [GFS2] Fix deallocation issues
There were two issues during deallocation of unlinked inodes. The
first was relating to the use of a "try" lock which in the case of
the inode lock wasn't trying hard enough to deallocate in all
circumstances (now changed to a normal glock) and in the case of
the iopen lock didn't wait for the demotion of the shared lock before
attempting to get the exclusive lock, and thereby sometimes (timing dependent)
not completing the deallocation when it should have done.

The second issue related to the lack of a way to invalidate dcache entries
on remote nodes (now fixed by this patch) which meant that unlinks were
taking a long time to return disk space to the fs. By adding some code to
invalidate the dcache entries across the cluster for unlinked inodes, that
is now fixed.

This patch was written jointly by Abhijith Das and Steven Whitehouse.

Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:23:36 +01:00
Alexey Dobriyan e8edc6e03a Detach sched.h from mm.h
First thing mm.h does is including sched.h solely for can_do_mlock() inline
function which has "current" dereference inside. By dealing with can_do_mlock()
mm.h can be detached from sched.h which is good. See below, why.

This patch
a) removes unconditional inclusion of sched.h from mm.h
b) makes can_do_mlock() normal function in mm/mlock.c
c) exports can_do_mlock() to not break compilation
d) adds sched.h inclusions back to files that were getting it indirectly.
e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
   getting them indirectly

Net result is:
a) mm.h users would get less code to open, read, preprocess, parse, ... if
   they don't need sched.h
b) sched.h stops being dependency for significant number of files:
   on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
   after patch it's only 3744 (-8.3%).

Cross-compile tested on

	all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
	alpha alpha-up
	arm
	i386 i386-up i386-defconfig i386-allnoconfig
	ia64 ia64-up
	m68k
	mips
	parisc parisc-up
	powerpc powerpc-up
	s390 s390-up
	sparc sparc-up
	sparc64 sparc64-up
	um-x86_64
	x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig

as well as my two usual configs.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21 09:18:19 -07:00
Robert Peterson 04b933f27b [GFS2] Red Hat bz 228540: owner references
In Testing the previously posted and accepted patch for
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=228540
I uncovered some gfs2 badness.  It turns out that the current
gfs2 code saves off a process pointer when glocks is taken
in both the glock and glock holder structures.  Those
structures will persist in memory long after the process has
ended; pointers to poisoned memory.

This problem isn't caused by the 228540 fix; the new capability
introduced by the fix just uncovered the problem.

I wrote this patch that avoids saving process pointers
and instead saves off the process pid.  Rather than
referencing the bad pointers, it now does process lookups.
There is special code that makes the output nicer for
printing holder information for processes that have ended.

This patch also adds a stub for the new "sprint_symbol"
function that exists in Andrew Morton's -mm patch set, but
won't go into the base kernel until 2.6.22, since it adds
functionality but doesn't fix a bug.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:10:55 +01:00
Steven Whitehouse 3b8249f617 [GFS2] Fix bz 224480 and cleanup glock demotion code
This patch prevents the printing of a warning message in cases where
the fs is functioning normally by handing off responsibility for
unlinked, but still open inodes, to another node for eventual deallocation.
Also, there is now an improved system for ensuring that such requests
to other nodes do not get lost. The callback on the iopen lock is
only ever called when i_nlink == 0 and when a node is unable to deallocate
it due to it still being in use on another node. When a node receives
the callback therefore, it knows that i_nlink must be zero, so we mark
it as such (in gfs2_drop_inode) in order that it will then attempt
deallocation of the inode itself.

As an additional benefit, queuing a demote request no longer requires
a memory allocation. This simplifies the code for dealing with gfs2_holders
as it removes one special case.

There are two new fields in struct gfs2_glock. gl_demote_state is the
state which the remote node has requested and gl_demote_time is the
time when the request came in. Both fields are only valid when the
GLF_DEMOTE flag is set in gl_flags.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:10:39 +01:00
Robert Peterson 7c52b166c5 [GFS2] Add gfs2_tool lockdump support to gfs2 (bz 228540)
The attached patch resolves bz 228540.  This adds the capability
for gfs2 to dump gfs2 locks through the debugfs file system.
This used to exist in gfs1 as "gfs_tool lockdump" but it's missing from
gfs2 because all the ioctls were stripped out.  Please see the bugzilla
for more history about the fix.  This patch is also attached to the bugzilla
record.

The patch is against Steve Whitehouse's latest nmw git tree kernel
(2.6.21-rc1) and has been tested on system trin-10.

Signed-off-by: Robert Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:10:29 +01:00
Steven Whitehouse b5d32bead1 [GFS2] Tidy up glops calls
This patch doesn't make any changes to the ordering of the various
operations related to glocking, but it does tidy up the calls to the
glops.c functions to make the structure more obvious.

The two functions: gfs2_glock_xmote_th() and gfs2_glock_drop_th() can be
made static within glock.c since they are called by every set of glock
operations. The xmote_th and drop_th glock operations are then made
conditional upon those two routines existing and called from the
previously mentioned functions in glock.c respectively.

Also it can be seen that the go_sync operation isn't needed since it can
easily be replaced by calls to xmote_bh and drop_bh respectively. This
results in no longer (confusingly) calling back into routines in glock.c
from glops.c and also reducing the glock operations by one member.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:37:26 -05:00
Steven Whitehouse 1c0f4872dc [GFS2] Remove local exclusive glock mode
Here is a patch for GFS2 to remove the local exclusive flag. In
the places it was used, mutex's are always held earlier in the
call path, so it appears redundant in the LM_ST_SHARED case.

Also, the GFS2 holders were setting local exclusive in any case where
the requested lock was LM_ST_EXCLUSIVE. So the other places in the glock
code where the flag was tested have been replaced with tests for the
lock state being LM_ST_EXCLUSIVE in order to ensure the logic is the
same as before (i.e. LM_ST_EXCLUSIVE is always locally exclusive as well
as globally exclusive).

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:37:20 -05:00
Steven Whitehouse e5dab552c8 [GFS2] Remove the "greedy" function from glock.[ch]
The "greedy" code was an attempt to retain glocks for a minimum length
of time when they relate to mmap()ed files. The current implementation
of this feature is not, however, ideal in that it required allocating
memory in order to do this and its overly complicated.

It also misses the mark by ignoring the other I/O operations which are
just as likely to suffer from the same problem. So the plan is to remove
this now and then add the functionality back as part of the glock state
machine at a later date (and thus take into account all the possible
users of this feature)

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:37:14 -05:00
Steven Whitehouse 3699e3a44b [GFS2] Clean up/speed up readdir
This removes the extra filldir callback which gfs2 was using to
enclose an attempt at readahead for inodes during readdir. The
code was too complicated and also hurts performance badly in the
case that the getdents64/readdir call isn't being followed by
stat() and it wasn't even getting it right all the time when it
was.

As a result, on my test box an "ls" of a directory containing 250000
files fell from about 7mins (freshly mounted, so nothing cached) to
between about 15 to 25 seconds. When the directory content was cached,
the time taken fell from about 3mins to about 4 or 5 seconds.

Interestingly in the cached case, running "ls -l" once reduced the time
taken for subsequent runs of "ls" to about 6 secs even without this
patch. Now it turns out that there was a special case of glocks being
used for prefetching the metadata, but because of the timeouts for these
locks (set to 10 secs) the metadata was being timed out before it was
being used and this the prefetch code was constantly trying to prefetch
the same data over and over.

Calling "ls -l" meant that the inodes were brought into memory and once
the inodes are cached, the glocks are not disposed of until the inodes
are pushed out of the cache, thus extending the lifetime of the glocks,
and thus bringing down the time for subsequent runs of "ls"
considerably.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:37:04 -05:00
Steven Whitehouse b004157ab5 [GFS2] Fix journal flush problem
This fixes a bug which resulted in poor performance due to flushing
the journal too often. The code path in question was via the inode_go_sync()
function in glops.c. The solution is not to flush the journal immediately
when inodes are ejected from memory, but batch up the work for glockd to
deal with later on. This means that glocks may now live on beyond the end of
the lifetime of their inodes (but not very much longer in the normal case).

Also fixed in this patch is a bug (which was hidden by the bug mentioned above) in
calculation of the number of free journal blocks.

The gfs2_logd process has been altered to be more responsive to the journal
filling up. We now wake it up when the number of uncommitted journal blocks
has reached the threshold level rather than trying to flush directly at the
end of each transaction. This again means doing fewer, but larger, log
flushes in general.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:36:42 -05:00
Steven Whitehouse 2ca99501fa [GFS2] Fix page lock/glock deadlock
This fixes a race between the glock and the page lock encountered
during truncate in gfs2_readpage and gfs2_prepare_write. The gfs2_readpages
function doesn't need the same fix since it only uses a try lock anyway, so
it will fail back to gfs2_readpage in the case of a potential deadlock.

This bug was spotted by Russell Cattelan.

Cc: Russell Cattelan <cattelan@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:34:43 -05:00
Steven Whitehouse c594d88664 [GFS2] Remove unused GL_DUMP flag
There is no way to set the GL_DUMP flag, and in any case the
same thing can be done with systemtap if required for debugging,
so this removes it.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:34:40 -05:00
Steven Whitehouse 94610610f1 [GFS2] Remove unused function from glock.c
The callback for iopen locks is unused, so this removes
it.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-09 18:59:27 -04:00
Steven Whitehouse 9b47c11d1c [GFS2] Use void * instead of typedef for locking module interface
As requested by Jan Engelhardt, this removes the typedefs in the
locking module interface and replaces them with void *. Also
since we are changing the interface, I've added a few consts
as well.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Cc: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-08 10:17:58 -04:00
Steven Whitehouse 1c089c325d [GFS2] Remove one typedef
This removes one of the typedefs from the locking interface. It
is replaced by a forward declaration of the gfs2 superblock. The
other two are not so easy to solve since in their case, they
can refer to one of two possible structures.

Cc: David Teigland <teigland@redhat.com>
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-07 15:50:20 -04:00
Steven Whitehouse 85d1da67f7 [GFS2] Move glock hash table out of superblock
There are several reasons why we want to do this:
 - Firstly its large and thus we'll scale better with multiple
   GFS2 fs mounted at the same time
 - Secondly its easier to scale its size as required (thats a plan
   for later patches)
 - Thirdly, we can use kzalloc rather than vmalloc when allocating
   the superblock (its now only 4888 bytes)
 - Fourth its all part of my plan to eventually be able to use RCU
   with the glock hash.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-07 14:40:21 -04:00
Steven Whitehouse f2f7ba5237 [GFS2] Make headers compile on their own
As per Jan Engelhardt's comments, this should make all the headers
compile on their own by including and/or declaring structures
early.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-05 10:39:21 -04:00
Steven Whitehouse cd915493fc [GFS2] Change all types to uX style
This makes all fixed size types have consistent names.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-04 12:49:07 -04:00
Steven Whitehouse 5029996547 [GFS2] Tidy up locking code
As per Jan Engelhardt's second email, this removes some unused code,
and fixes up indenting in various places.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-04 09:49:55 -04:00
Steven Whitehouse e9fc2aa091 [GFS2] Update copyright, tidy up incore.h
As per comments from Jan Engelhardt <jengelh@linux01.gwdg.de> this
updates the copyright message to say "version" in full rather than
"v.2". Also incore.h has been updated to remove forward structure
declarations which are not required.

The gfs2_quota_lvb structure has now had endianess annotations added
to it. Also quota.c has been updated so that we now store the
lvb data locally in endian independant format to avoid needing
a structure in host endianess too. As a result the endianess
conversions are done as required at various points and thus the
conversion routines in lvb.[ch] are no longer required. I've
moved the one remaining constant in lvb.h thats used into lm.h
and removed the unused lvb.[ch].

I have not changed the HIF_ constants. That is left to a later patch
which I hope will unify the gh_flags and gh_iflags fields of the
struct gfs2_holder.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-01 11:05:15 -04:00
Steven Whitehouse 5e2b0613ed [GFS2] Remove unused code from glock layer
Remove the unused sync feature from glocks. This is currently done by
calling the required functions to sync pages/blocks directly so this
code isn't needed.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-30 09:38:30 -04:00
Steven Whitehouse 8fb4b536e7 [GFS2] Make glock operations const
For all the usual reasons of enforcing correctness and potentially
reducing code size, this patch makes the glock operations const.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-30 09:30:00 -04:00
Steven Whitehouse feaa7bba02 [GFS2] Fix unlinked file handling
This patch fixes the way we have been dealing with unlinked,
but still open files. It removes all limits (other than memory
for inodes, as per every other filesystem) on numbers of these
which we can support on GFS2. It also means that (like other
fs) its the responsibility of the last process to close the file
to deallocate the storage, rather than the person who did the
unlinking. Note that with GFS2, those two events might take place
on different nodes.

Also there are a number of other changes:

 o We use the Linux inode subsystem as it was intended to be
used, wrt allocating GFS2 inodes
 o The Linux inode cache is now the point which we use for
local enforcement of only holding one copy of the inode in
core at once (previous to this we used the glock layer).
 o We no longer use the unlinked "special" file. We just ignore it
completely. This makes unlinking more efficient.
 o We now use the 4th block allocation state. The previously unused
state is used to track unlinked but still open inodes.
 o gfs2_inoded is no longer needed
 o Several fields are now no longer needed (and removed) from the in
core struct gfs2_inode
 o Several fields are no longer needed (and removed) from the in core
superblock

There are a number of future possible optimisations and clean ups
which have been made possible by this patch.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-06-14 15:32:57 -04:00
Steven Whitehouse 320dd101e2 [GFS2] glock debugging and inode cache changes
This adds some extra debugging to glock.c and changes
inode.c's deallocation code to call the debugging code
at a suitable moment. I'm chasing down a particular bug
to do with deallocation at the moment and the code can
go again once the bug is fixed.

Also this includes the first part of some changes to unify
the Linux struct inode and GFS2's struct gfs2_inode. This
transformation will happen in small parts over the next short
period.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-05-18 16:25:27 -04:00
Steven Whitehouse 3a8a9a1034 [GFS2] Update copyright date to 2006
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-05-18 15:09:15 -04:00
Adrian Bunk 08bc2dbc73 [GFS2] [-mm patch] fs/gfs2/: possible cleanups
This patch contains the following possible cleanups:
- make needlessly global code static
- #if 0 unused functions
- remove the following global function that was both unused and
  unimplemented:
  - super.c: gfs2_do_upgrade()

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-28 10:59:12 -04:00
Steven Whitehouse 579b78a43b [GFS2] Remove GL_NEVER_RECURSE flag
There is no point in keeping this flag since recursion is not
now allowed for any glock.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-26 14:58:26 -04:00
Steven Whitehouse 190562bd84 [GFS2] Fix a bug: scheduling under a spinlock
At some stage, a mutex was added to gfs2_glock_put() without
checking all its call sites. Two of them were called from
under a spinlock causing random delays at various points and
crashes.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-20 16:57:23 -04:00
Steven Whitehouse fe1bdedc6c [GFS2] Use vmalloc() in dir code
When allocating memory to sort directory entries, use vmalloc()
rather than kmalloc() since for larger directories, the required
size can easily be graeter than the 128k maximum of kmalloc().

Also adding the first steps towards getting the AOP_TRUNCATED_PAGE
return code get in the glock code by flagging all places where we
request a glock and we are holding a page lock.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-18 10:09:15 -04:00
Steven Whitehouse d0dc80dbaf [GFS2] Update debugging code
Update the debugging code in trans.c and at the same time improve
the debugging code for gfs2_holders. The new code should be pretty
fast during the normal case and provide just as much information
in case of errors (or more).

One small function from glock.c has moved to glock.h as a static inline so
that its return address won't get in the way of the debugging.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-29 14:36:49 -05:00
David Teigland b3b94faa5f [GFS2] The core of GFS2
This patch contains all the core files for GFS2.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16 16:50:04 +00:00