Commit Graph

80 Commits

Author SHA1 Message Date
Tejun Heo f521f074ab dm stripe: switch from local workqueue to system_wq
kstriped only serves sc->kstriped_ws which runs dm_table_event().
This doesn't need to be executed from an ordered workqueue w/ rescuer.
Drop kstriped and use the system_wq instead.  While at it, rename
kstriped_ws to trigger_event so that it's consistent with other dm
modules.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:57 +00:00
Tejun Heo d87f4c14f2 dm: implement REQ_FLUSH/FUA support for bio-based dm
This patch converts bio-based dm to support REQ_FLUSH/FUA instead of
now deprecated REQ_HARDBARRIER.

* -EOPNOTSUPP handling logic dropped.

* Preflush is handled as before but postflush is dropped and replaced
  with passing down REQ_FUA to member request_queues.  This replaces
  one array wide cache flush w/ member specific FUA writes.

* __split_and_process_bio() now calls __clone_and_map_flush() directly
  for flushes and guarantees all FLUSH bio's going to targets are zero
`  length.

* It's now guaranteed that all FLUSH bio's which are passed onto dm
  targets are zero length.  bio_empty_barrier() tests are replaced
  with REQ_FLUSH tests.

* Empty WRITE_BARRIERs are replaced with WRITE_FLUSHes.

* Dropped unlikely() around REQ_FLUSH tests.  Flushes are not unlikely
  enough to be marked with unlikely().

* Block layer now filters out REQ_FLUSH/FUA bio's if the request_queue
  doesn't support cache flushing.  Advertise REQ_FLUSH | REQ_FUA
  capability.

* Request based dm isn't converted yet.  dm_init_request_based_queue()
  resets flush support to 0 for now.  To avoid disturbing request
  based dm code, dm->flush_error is added for bio based dm while
  requested based dm continues to use dm->barrier_error.

Lightly tested linear, stripe, raid1, snap and crypt targets.  Please
proceed with caution as I'm not familiar with the code base.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: dm-devel@redhat.com
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:38 +02:00
Mikulas Patocka 7b76ec11fe dm stripe: support discards
The DM core will submit a discard bio to the stripe target for each
stripe in a striped DM device.  The stripe target will determine
stripe-specific portions of the supplied bio to be remapped into
individual (at most 'num_discard_requests' extents).  If a given
stripe-specific discard bio doesn't touch a particular stripe the bio
will be dropped.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:26 +01:00
Mikulas Patocka c96053b767 dm stripe: optimize sector division
Optimize sector division: If the number of stripes is a power of two,
we can do shift and mask instead of division.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:21 +01:00
Mikulas Patocka 65988525ab dm stripe: move sector translation to a function
Move sector to stripe translation into a function.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:14 +01:00
Alasdair G Kergon b441a262e7 dm: use dm_target_offset macro
Use new dm_target_offset() macro to avoid most references to ti->begin
in dm targets.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:11 +01:00
Mike Snitzer 57cba5d365 dm: rename map_info flush_request to target_request_nr
'target_request_nr' is a more generic name that reflects the fact that
it will be used for both flush and discard support.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:04 +01:00
Christoph Hellwig 7b6d91daee block: unify flags for struct bio and struct request
Remove the current bio flags and reuse the request flags for the bio, too.
This allows to more easily trace the type of I/O from the filesystem
down to the block driver.  There were two flags in the bio that were
missing in the requests:  BIO_RW_UNPLUG and BIO_RW_AHEAD.  Also I've
renamed two request flags that had a superflous RW in them.

Note that the flags are in bio.h despite having the REQ_ name - as
blkdev.h includes bio.h that is the only way to go for now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:20:39 +02:00
Nikanth Karthikesan 8215d6ec5f dm table: remove unused dm_get_device range parameters
Remove unused parameters(start and len) of dm_get_device()
and fix the callers.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-03-06 02:32:27 +00:00
Nikanth Karthikesan 781248c1b5 dm stripe: avoid divide by zero with invalid stripe count
If a table containing zero as stripe count is passed into stripe_ctr
the code attempts to divide by zero.

This patch changes DM_TABLE_LOAD to return -EINVAL if the stripe count
is zero.

We now get the following error messages:
  device-mapper: table: 253:0: striped: Invalid stripe count
  device-mapper: ioctl: error adding target to table

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Cc: stable@kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-02-16 18:42:47 +00:00
Martin K. Petersen 3c5820c743 block: Optimal I/O limit wrapper
Implement blk_limits_io_opt() and make blk_queue_io_opt() a wrapper
around it. DM needs this to avoid poking at the queue_limits directly.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-14 08:24:52 +02:00
Jens Axboe 1f98a13f62 bio: first step in sanitizing the bio->bi_rw flag testing
Get rid of any functions that test for these bits and make callers
use bio_rw_flagged() directly. Then it is at least directly apparent
what variable and flag they check.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-11 14:33:31 +02:00
Mike Snitzer 40bea43127 dm stripe: expose correct io hints
Set sensible I/O hints for striped DM devices in the topology
infrastructure added for 2.6.31 for userspace tools to
obtain via sysfs.

Add .io_hints to 'struct target_type' to allow the I/O hints portion
(io_min and io_opt) of the 'struct queue_limits' to be set by each
target and implement this for dm-stripe.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04 20:40:25 +01:00
Mike Snitzer 5dea271b6d dm table: pass correct dev area size to device_area_is_valid
Incorrect device area lengths are being passed to device_area_is_valid().

The regression appeared in 2.6.31-rc1 through commit
754c5fc7eb.

With the dm-stripe target, the size of the target (ti->len) was used
instead of the stripe_width (ti->len/#stripes).  An example of a
consequent incorrect error message is:

  device-mapper: table: 254:0: sdb too small for target

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-07-23 20:30:42 +01:00
Mike Snitzer af4874e03e dm target:s introduce iterate devices fn
Add .iterate_devices to 'struct target_type' to allow a function to be
called for all devices in a DM target.  Implemented it for all targets
except those in dm-snap.c (origin and snapshot).

(The raid1 version number jumps to 1.12 because we originally reserved
1.1 to 1.11 for 'block_on_error' but ended up using 'handle_errors'
instead.)

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: martin.petersen@oracle.com
2009-06-22 10:12:33 +01:00
Mikulas Patocka 374bf7e7f6 dm: stripe support flush
Flush support for the stripe target.

This sets ti->num_flush_requests to the number of stripes and
remaps individual flush requests to the appropriate stripe devices.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:22 +01:00
Mikulas Patocka 10d3bd09a3 dm: consolidate target deregistration error handling
Change dm_unregister_target to return void and use BUG() for error
reporting.

dm_unregister_target can only fail because of programming bug in the
target driver. It can't fail because of user's behavior or disk errors.

This patch changes unregister_target to return void and use BUG if
someone tries to unregister non-registered target or unregister target
that is in use.

This patch removes code duplication (testing of error codes in all dm
targets) and reports bugs in just one place, in dm_unregister_target. In
some target drivers, these return codes were ignored, which could lead
to a situation where bugs could be missed.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:04:58 +00:00
Heinz Mauelshagen 6edebdee48 dm stripe: fix init failure
Don't proceed if dm_stripe_init() fails to register itself as a dm target.

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-11-13 23:38:56 +00:00
Mikulas Patocka 586e80e6ee dm: remove dm header from targets
Change #include "dm.h" to #include <linux/device-mapper.h> in all targets.
Targets should not need direct access to internal DM structures.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21 17:44:59 +01:00
Mikulas Patocka d63a5ce3c0 dm: publish array_too_big
Move array_too_big to include/linux/device-mapper.h because it is
used by targets.

Remove the test from dm-raid1 as the number of mirror legs is limited
such that it can never fail.  (Even for stripes it seems rather
unlikely.)

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21 17:44:57 +01:00
Tejun Heo f331c0296f block: don't depend on consecutive minor space
* Implement disk_devt() and part_devt() and use them to directly
  access devt instead of computing it from ->major and ->first_minor.

  Note that all references to ->major and ->first_minor outside of
  block layer is used to determine devt of the disk (the part0) and as
  ->major and ->first_minor will continue to represent devt for the
  disk, converting these users aren't strictly necessary.  However,
  convert them for consistency.

* Implement disk_max_parts() to avoid directly deferencing
  genhd->minors.

* Update bdget_disk() such that it doesn't assume consecutive minor
  space.

* Move devt computation from register_disk() to add_disk() and make it
  the only one (all other usages use the initially determined value).

These changes clean up the code and will help disk->part dereference
fix and extended block device numbers.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:05 +02:00
Brian Wood 4f7f5c675f dm: stripe enhanced status return
This patch adds additional information to the status line. It is added at the
end of the returned text so it will not interfere with existing
implementations using this data. The addition of this information will allow
for a common return interface to match that returned with the dm-raid1.c
status line (with Jonathan Brassow's patches).

Here is a sample of what is returned with a mirror "status" call:
isw_eeaaabgfg_mirror: 0 488390920 mirror 2 8:16 8:32 3727/3727 1 AA 1 core

Here's what's returned with this patch for a stripe "status" call:
isw_dheeijjdej_stripe: 0 976783872 striped 2 8:16 8:32 1 AA

Signed-off-by: Brian Wood <brian.j.wood@intel.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:24 +00:00
Brian Wood a25eb9446a dm: stripe trigger event on failure
This patch adds the stripe_end_io function to process errors that might
occur after an IO operation. As part of this there are a number of
enhancements made to record and trigger events:

- New atomic variable in struct stripe to record the number of
errors each stripe volume device has experienced (could be used
later with uevents to report back directly to userspace)

- New workqueue/work struct setup to process the trigger_event function

- New end_io function. It is here that testing for BIO error conditions
take place. It determines the exact stripe that cause the error,
records this in the new atomic variable, and calls the queue_work() function

- New trigger_event function to process failure events. This
calls dm_table_event()

Signed-off-by: Brian Wood <brian.j.wood@intel.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-02-08 02:11:22 +00:00
vignesh babu 6f3c3f0afa dm: use is_power_of_2
Replacing n & (n - 1) for power of 2 check by is_power_of_2(n)

Signed-off-by: vignesh babu <vignesh.babu@wipro.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-20 02:01:06 +01:00
Kiyoshi Ueda d2a7ad29a8 [PATCH] dm: map and endio symbolic return codes
Update existing targets to use the new symbols for return values from target
map and end_io functions.

There is no effect on behaviour.

Test results:
Done build test without errors.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:09 -08:00
Alasdair G Kergon 72d9486169 [PATCH] dm: improve error message consistency
Tidy device-mapper error messages to include context information
automatically.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:36 -07:00
Kevin Corry a22c96c737 [PATCH] dm: remove unnecessary typecast
Signed-off-by: Kevin Corry <kevcorry@us.ibm.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 08:45:00 -08:00
Andrew Morton 4ee218cd67 [PATCH] dm: remove SECTOR_FORMAT
We don't know what type sector_t has.  Sometimes it's unsigned long, sometimes
it's unsigned long long.  For example on ppc64 it's unsigned long with
CONFIG_LBD=n and on x86_64 it's unsigned long long with CONFIG_LBD=n.

The way to handle all of this is to always use unsigned long long and to
always typecast the sector_t when printing it.

Acked-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 08:44:58 -08:00
Kevin Corry 8ba32fde2c [PATCH] dm stripe: Fix bounds
The dm-stripe target currently does not enforce that the size of a stripe
device be a multiple of the chunk-size.  Under certain conditions, this can
lead to I/O requests going off the end of an underlying device.  This
test-case shows one example.

echo "0 100 linear /dev/hdb1 0" | dmsetup create linear0
echo "0 100 linear /dev/hdb1 100" | dmsetup create linear1
echo "0 200 striped 2 32 /dev/mapper/linear0 0 /dev/mapper/linear1 0" | \
   dmsetup create stripe0
dd if=/dev/zero of=/dev/mapper/stripe0 bs=1k

This will produce the output:
dd: writing '/dev/mapper/stripe0': Input/output error
97+0 records in
96+0 records out

And in the kernel log will be:
attempt to access beyond end of device
dm-0: rw=0, want=104, limit=100

The patch will check that the table size is a multiple of the stripe
chunk-size when the table is created, which will prevent the above striped
device from being created.

This should not affect tools like LVM or EVMS, since in all the cases I can
think of, striped devices are always created with the sizes being a
multiple of the chunk-size.

The size of a stripe device must be a multiple of its chunk-size.

(akpm: that typecast is quite gratuitous)

Signed-off-by: Kevin Corry <kevcorry@us.ibm.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-17 07:51:25 -08:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00