Commit Graph

126 Commits

Author SHA1 Message Date
Linus Walleij b4d3053c8c irqchip: Add a driver for Cortina Gemini
As a part of transitioning the Gemini platform to device tree we
create this clean, device-tree-only irqchip driver.

Cc: Janos Laube <janos.dev@gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08 14:07:27 +00:00
Agustin Vega-Frias f20cc9b00c irqchip/qcom: Add IRQ combiner driver
Driver for interrupt combiners in the Top-level Control and Status
Registers (TCSR) hardware block in Qualcomm Technologies chips.

An interrupt combiner in this block combines a set of interrupts by
OR'ing the individual interrupt signals into a summary interrupt
signal routed to a parent interrupt controller, and provides read-
only, 32-bit registers to query the status of individual interrupts.
The status bit for IRQ n is bit (n % 32) within register (n / 32)
of the given combiner. Thus, each combiner can be described as a set
of register offsets and the number of IRQs managed.

Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-03 15:03:49 +00:00
Zubair Lutfullah Kakakhel 0547dc7885 microblaze/irqchip: Move intc driver to irqchip
The Xilinx AXI Interrupt Controller IP block is used by the MIPS
based xilfpga platform and a few PowerPC based platforms.

Move the interrupt controller code out of arch/microblaze so that
it can be used by everyone

Tested-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-11-29 09:14:49 +00:00
Linus Torvalds a771151a83 ARM: SoC cleanups for v4.9
The cleanups for v4.9 are a little larger that usual, but thankfully
 that is almost exclusively due to removing a significant number of
 files that have become obsolete after the still ongoing conversion
 of old board files to devicetree.
 
 - for mach-omap2, which is still the largest platform in arch/arm/,
   the conversion to DT is finally complete after the Nokia N900 is
   now fully supported there, along with the omap3 LDP, and we can
   remove those two board files.
   If no regressions are found, another large cleanup for the platform
   will happen as a follow-up, removing dead code and restructuring
   the platform based on being DT-only.
 
 - In mach-imx, similar work is ongoing, but has not come that far.
   This time, we remove the obsolete board file for the i.MX1
   generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now DT-only.
   The remaining board files are for i.MX2 and i.MX3 machines
   based on old ARM926 or ARM1136 cores that should work with DT
   in principle.
 
 - realview has just been converted from board files to DT, and a lot
   of code gets removed in the process. This is the last
   ARM/Keil/Versatile derived platform that was still using board
   files, the other ones being integrator, versatile and vexpress.
   We can probably merge the remaining code into a single directory
   in the near future.
 
 - clps711x had completed the conversion in v4.8, but we accidentally
   left the files in place that should have been deleted then.
 
 Conflicts: two files deleted here have been modified upstream,
 the changes can be discarded.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV/guBGCrR//JCVInAQJoaQ/+N42zjmqDg6zO2JSs3q793AHskllT7kJo
 2G36Afl3hOZqy2TFF8nq5Iv8/hb45+3bHBIlq+JrOq5Fep3wFVfT0d1HMQ8UG6+K
 jSMikItIZkOJdmjuZLEBzhjUFIEIpIrSuSY1Pej5Sy8zDzxT+n68gVqcm/qxa2w6
 gPThdL69/XDo7JkF9TbYn0nrECey3ps9XnikNITWyQTrvCmlDVtGp6B+Cwi4cyvh
 FfJ690GAJU3/9op+xLomtEt1sli/+xJUdpH0IktfuNrc/2i96NsiUgPbqprIP6C6
 rGRN40tDClYa1viRexZlZdkCd7nH9PC+VCC59FONYiY8WmpwtNPVZ8px4D/rv7AX
 GHDnqeVbzUK/CMxRsQC0bnvQnD/oDqkSkDD7ixzfUh2TQiJASXvuj1vOej5k06Vc
 KFkpjh1dSZkehkUp106F2Obm8Sh7nNoG2olzrlzlza97OuYxAEBungIn95vjYbUj
 IRrTQdKgv3gVVGXzHjH7TMr46MZLk6K4mHjDeuQr/NN8JyPH0uLTy6pjsdXRWCvO
 sIWVhyMohKMU2q5NeBWmY0OtDje93JchRVeKfRaQ3+YysPMUTBK5ZtI5GB9tsM14
 7/GA7MO4FA0MZWW2E/GllQzgreaokUzTxBbhANzcEyjGh9OEx4gYaSF68PRy/HBa
 TlhH1PR3PNg=
 =WaLy
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "The cleanups for v4.9 are a little larger that usual, but thankfully
  that is almost exclusively due to removing a significant number of
  files that have become obsolete after the still ongoing conversion of
  old board files to devicetree.

   - for mach-omap2, which is still the largest platform in arch/arm/,
     the conversion to DT is finally complete after the Nokia N900 is
     now fully supported there, along with the omap3 LDP, and we can
     remove those two board files. If no regressions are found, another
     large cleanup for the platform will happen as a follow-up, removing
     dead code and restructuring the platform based on being DT-only.

   - In mach-imx, similar work is ongoing, but has not come that far.
     This time, we remove the obsolete board file for the i.MX1
     generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now
     DT-only. The remaining board files are for i.MX2 and i.MX3 machines
     based on old ARM926 or ARM1136 cores that should work with DT in
     principle.

   - realview has just been converted from board files to DT, and a lot
     of code gets removed in the process. This is the last
     ARM/Keil/Versatile derived platform that was still using board
     files, the other ones being integrator, versatile and vexpress. We
     can probably merge the remaining code into a single directory in
     the near future.

   - clps711x had completed the conversion in v4.8, but we accidentally
     left the files in place that should have been deleted then"

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM
  ARM: stop *MIGHT_HAVE_PCI* config from being selected redundantly
  ARM: imx: (trivial) fix typo and grammar
  ARM: clps711x: remove extraneous files
  ARM: imx: use IS_ENABLED() instead of checking for built-in or module
  ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module
  ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or module
  ARM: imx: remove platform-mxc_rnga
  ARM: realview: imply device tree boot
  ARM: realview: no need to select SMP_ON_UP explicitly
  ARM: realview: delete the RealView board files
  ARM: imx: no need to select SMP_ON_UP explicitly
  ARM: i.MX: Move SOC_IMX1 into 'Device tree only'
  ARM: i.MX: Remove i.MX1 non-DT support
  ARM: i.MX: Remove i.MX1 Synertronixx SCB9328 board support
  ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support
  ARM: mxs: remove obsolete startup code for TX28
  ARM: i.MX31 iomux: remove duplicates with alternate name
  ARM: i.MX31 iomux: remove plain duplicates
  ARM: OMAP2+: Drop legacy board file for LDP
  ...
2016-10-07 21:16:16 -07:00
Thomas Gleixner 474aa3dd3e irqchip core changes for v4.9
- jcore: Add AIC driver
  - mips-gic: Use for_each_set_bit
  - mvebu: Add PIC driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJX5Cv8AAoJEP45WPkGe8ZnG/YP/23xxSShaURhhgmdk7vqMlp3
 D4C+YZqghx3Xq+kVTH5R20FeZbQuC7DNV1B+zo75DIbCAQ0aNCYU94DIOrGDNj/S
 QocuWUy4oawYl730GEE7AVQL4kBK+fOwwAn7c6HjcRunNEU/IgNXwkWZLir/hpL+
 KRFWXnPSocKUh50lXcGeHPrChEduT7cz7f6U/OyYzb8AgHw3zjJiWCqMaTcIGF/V
 6fYsQjEuAj79UMxsuTH0Mv0vA/SzbyhtRRBIsGcP/Ket6ZW6DfdglB3SsAdxHxRa
 RoweK8zVorDfixjAOA/OsZ8vrjtyF2y9e/uHVXGMWfBgbXmP19QxpxtP+7u0z1Cq
 /L9rW0vYoQfv3tjvSon5TUOW/QMqmqvoclSTz80nRJmocEm8Za871vD53+iFOyPE
 sy0CsrussaooFahIl1z/kE5bugBBJKoTAnsAtfaWpTXTW+KGWOqncxsh6H9bMZUc
 XXbqr5TOqJk5ck9LJafLdDeVA4Cw2j7tq4wzXPnxoPwy6Dwgdjinsw8QWMbrlywR
 2zGFuFlJdbRmHftFJujZ9XorTLa7978AU5K7CHr7ofaV742DH5hBRAUvBx6jTNhA
 4W9UchKtEPzgzrvESVBYSj+cgvBYllewZg1XZgxDqQQ5CI2ePTKLaQwjVWiO4Q3K
 d9ZytcRUtuJtEWfbnyaT
 =DNCg
 -----END PGP SIGNATURE-----

Merge tag 'irqchip-core-4.9' of git://git.infradead.org/users/jcooper/linux into irq/core

Pull irqchip core changes for v4.9 from Jason Cooper

 - jcore: Add AIC driver
 - mips-gic: Use for_each_set_bit
 - mvebu: Add PIC driver
2016-09-22 22:49:52 +02:00
Alexandre TORGUE e072041688 drivers/irqchip: Add STM32 external interrupts support
The STM32 external interrupt controller consists of edge detectors that
generate interrupts requests or wake-up events.

Each line can be independently configured as interrupt or wake-up source,
and triggers either on rising, falling or both edges. Each line can also
be masked independently.

Originally-from: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: arnd@arndb.de
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: bruherrera@gmail.com
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: lee.jones@linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1474387259-18926-3-git-send-email-alexandre.torgue@st.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-21 14:13:21 +02:00
Jason Cooper e02a9b7ce4 Merge branch 'irqchip/mvebu64' into irqchip/core 2016-08-23 12:34:13 +00:00
Thomas Petazzoni a109893bd3 irqchip/mvebu-pic: New driver for Marvell Armada 7K/8K PIC
The Marvell Armada 7K/8K integrates a secondary interrupt controller
very originally named "PIC". It is connected to the main GIC via a
PPI. Amongst other things, this PIC is used for the ARM PMU.

This commit adds a simple irqchip driver for this interrupt
controller. Since this interrupt controller is not needed early at boot
time, we make the driver a proper platform driver rather than use the
IRQCHIP_DECLARE() mechanism.

Signed-off-by: Yehuda Yitschak <yehuday@marvell.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1470408921-447-3-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-08-22 22:58:27 +00:00
Linus Walleij 8f2c00629e ARM: realview: imply device tree boot
This reduces the Kconfig for the RealView by assuming we are
always booting from the device tree, and removing all the uses
of CONFIG_REALVIEW_DT and replacing with CONFIG_ARCH_REALVIEW.

Further:

- Drop REALVIEW_HIGH_PHYS_OFFSET: we don't use this with device
  tree.

- Drop the REALVIEW_EB_ARM11MP_REVB option: we now handle this
  by simply using another device tree.

- Drop the PB1176 secure flash option: this is defined in the
  PB1176 device tree but marked as "disabled", so users who
  want to use it can simply enable it in the device tree and
  go hacking around.

Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-15 20:53:07 +02:00
Rich Felker 981b58f66c irqchip/jcore-aic: Add J-Core AIC driver
There are two versions of the J-Core interrupt controller in use, aic1
which generates interrupts with programmable priorities, but only
supports 8 irq lines and maps them to cpu traps in the range 17 to 24,
and aic2 which uses traps in the range 64-127 and supports up to 128
irqs, with priorities dependent on the interrupt number. The Linux
driver does not make use of priorities anyway.

For simplicity, there is no aic1-specific logic in the driver beyond
setting the priority register, which is necessary for interrupts to
work at all. Eventually aic1 will likely be phased out, but it's
currently in use in deployments and all released bitstream binaries.

Signed-off-by: Rich Felker <dalias@libc.org>
Link: https://lkml.kernel.org/r/c3b89ef74aaa6477575dbe2d410eb1d182503243.147018b6529.git.dalias@libc.org
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-08-08 20:28:11 +00:00
Thomas Gleixner 4030103b9b irqchip core changes for v4.8 (second set)
- Add Aspeed VIC driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXdwfpAAoJEP45WPkGe8ZnhM0P/1Y4A4JU8U8kZHLHCAZgxMAT
 Bvjqj7liwWH/KohM7WEr0DoYG5v2gxcN0tXLENez03sqO8UnDoG44UPDPeRdUR0y
 lqrVvg5rCHjoEzg2ilO8lpgfY2BLvF9fYTTrj0g79URpnKijqYDlM9e1cfBw0wh8
 bVsIBB9WkZFVpWiGE+aONbfDnUN59hrKz/lSdOo88g97Cgs4kl8Rn75mMTqhMpYg
 7ttCu6a3dnKUSDFYcOeFHglNXg7gzTsV+FDAQ2NO7ikVDMP4YLAC9XuLuaIUBMbh
 3VO41pmhJ1LGzCFQidtG0vDF/e9Sj+ifmTorh+icEspS56OwsG1XVQeqsrLEnBrX
 gM7jkq9+4861BJKRIM18g94YxPNlHrkw1JifMw3DlTar7sGUk5SSdHys7+wFtc4t
 X8dGcgiTzv4zGcCRgFbWv78zEqHnnF3LjYtXC7kOqwiSw5vugkqtLocrze5X5D9+
 pnPIcuZN3rRvmZu+uO44asmA3quQc9ohE1JvyAcG2zTdNkj54HGbsGihhdEGhHJx
 tJoXdAssCjQxky8/uca5fb2lAz5yKfTjRx6hb7iu6wys4LDzF/lXl1JrOLbifw0n
 l/4w5qSxykDhuVtPJQ919HdFMDN9Zum5UDmhOu5t6/3j7fcNizdG3l0ikbyFRwW2
 Mp5Z09BfjKKCYo1l2qeG
 =09Q0
 -----END PGP SIGNATURE-----

Merge tag 'irqchip-core-4.8-2' of git://git.infradead.org/users/jcooper/linux into irq/core

Pull irqchip core changes for v4.8 (second set) from Jason Cooper:

 - Add Aspeed VIC driver
2016-07-02 11:42:56 +02:00
Benjamin Herrenschmidt 5952884258 irqchip/aspeed-vic: Add irq controller for Aspeed
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lkml.kernel.org/r/1463064193-2178-3-git-send-email-joel@jms.id.au
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-06-22 18:44:54 +00:00
Jon Hunter 9c8edddfc9 irqchip/gic: Add platform driver for non-root GICs that require RPM
Add a platform driver to support non-root GICs that require runtime
power-management. Currently, only non-root GICs are supported because
the functions, smp_cross_call() and set_handle_irq(), that need to
be called for a root controller are located in the __init section and
so cannot be called by the platform driver.

The GIC platform driver re-uses many functions from the existing GIC
driver including some functions to save and restore the GIC context
during power transitions. The functions for saving and restoring the
GIC context are currently only defined if CONFIG_CPU_PM is enabled and
to ensure that these functions are always defined when the platform
driver is enabled, a dependency on CONFIG_ARM_GIC_PM (which selects the
platform driver) has been added.

In order to re-use the private GIC initialisation code, a new public
function, gic_of_init_child(), has been added which calls various
private functions to initialise the GIC. This is different from the
existing gic_of_init() because it only supports non-root GICs (ie. does
not call smp_cross_call() is set_handle_irq()) and is not located in
the __init section (so can be used by platform drivers). Furthermore,
gic_of_init_child() dynamically allocates memory for the GIC chip data
which is also different from gic_of_init().

There is no specific suspend handling for GICs registered as platform
devices. Non-wakeup interrupts will be disabled by the kernel during
late suspend, however, this alone will not power down the GIC if
interrupts have been requested and not freed. Therefore, requestors of
non-wakeup interrupts will need to free them on entering suspend in
order to power-down the GIC.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-13 11:53:52 +01:00
Linus Torvalds 0efacbbaee ARC updates for 4.7-rc1
- Support for EZChip (now Mellanox) NPS-400 Network processor based on ARC700
     http://www.mellanox.com/related-docs/prod_npu/PB_NPS-400.pdf
 - NPS interrupt controller and clocksource drivers
 - ARC timers probed off DT
 - ARC iqrchips switching to linear domain (upgrade from legacy domains)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXPVjYAAoJEGnX8d3iisJeMJQP/2fBHUqCVjxYMaU0XSy/rFiu
 XItBxYfDHw+pXILgwZ1XPy0CNUxNhGmIG+0Scy+Uw9bDa64Eulked6QVsLlosOky
 2rbmDAZf2/fnwFhASg9eY2Xm5B2jFvStzmTkOgAkGko5cCwF7WWZJhLiziSICvK/
 l7I5yr0SSpn9xGbazeIxyqw16e4QuY+uCKXF12AoGOi+efpe1L7vrbu9WKELWQfJ
 NreZjxC16je944POnE4hw4F11Tg+uvhgQAAlmFCUswIZwtnTjttrmMyflop86H3S
 cItT1UV/ps24lD2ZZVIlI6Gdc/iKB0FSq7XTpTOAVI/ku5x2tWGmRb8aM5pxmCkX
 r44dXW89P9JFhthWKS79FwXgwxIMMN3CniO+g4YnrpI23iu6O+kXGoQejwsE1NZ0
 99+gXcUvEL1E5GZ7JfAdIvU741Y+y06fgXBs8Z+BGKzUNN5bI3PtuPeVNQwC38J7
 lY8UegRW/elmiNiOilz+QZ5sGX/QVnN68UQNkBYHZRom/3vpzcMMZpTu5xgw5XqQ
 CnCd0lD0tWICyiq6BXeNACBgQ6RX+KY9EECpVt05CTw5IxZQyGMAJwNqIuLw3Id3
 j42IiJ3PHH1yS+TeWOYf2mEvXj8vyiQK6fssy6xZ0bPqRKaEqwAKeDEW2St9N9B4
 0PhS1VwvL5RXsZx79/6e
 =pnAx
 -----END PGP SIGNATURE-----

Merge tag 'arc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC updates from Vineet Gupta:
 "We have a relatively big changeset for ARC for 4.7.

  The highlight is support for EZChip (now Mellanox) NPS-400 network
  processor, a 400-Gb throughput C-programmable packet processor based
  on ARC700 cores from Synopsys. See

        http://www.mellanox.com/related-docs/prod_npu/PB_NPS-400.pdf

  Also present are irqchip and clocksource drivers for NPS as agreed
  with respective maintainers to go via ARC tree due to an soc header
  dependency.  I have the needed ACKs from Jason, Marc, Daniel.  You
  might run into a trivial merge conflict in drivers/irqchip/*

  This EZChip platform support required some deep changes in ARC
  architecture code and also opportunity to cleanup past sins (legacy
  irq domains, missing irq domain lookup, hard coded timer irqs...)

  Summary:

   - Support for EZChip (now Mellanox) NPS-400 Network processor based
     on ARC700

   - NPS interrupt controller and clocksource drivers

   - ARC timers probed off DT

   - ARC iqrchips switching to linear domain (upgrade from legacy
     domains)"

* tag 'arc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (37 commits)
  arc: axs103_smp: Fix CPU frequency to 100MHz for dual-core
  arc: axs10x: Add DT bindings for I2S PLL Clock
  ARC: pae: STRICT_MM_TYPECHECKS was broken
  ARC: Add eznps platform to Kconfig and Makefile
  ARC: [plat-eznps] Use dedicated COMMAND_LINE_SIZE
  ARC: [plat-eznps] Use dedicated cpu_relax()
  ARC: [plat-eznps] Use dedicated identity auxiliary register.
  ARC: [plat-eznps] Use dedicated SMP barriers
  ARC: [plat-eznps] Use dedicated atomic/bitops/cmpxchg
  ARC: [plat-eznps] Use dedicated user stack top
  ARC: [plat-eznps] Add eznps platform
  ARC: [plat-eznps] Add eznps board defconfig and dts
  ARC: Mark secondary cpu online only after all HW setup is done
  ARC: rwlock: disable interrupts in !LLSC variant
  ARC: Make vmalloc size configurable
  ARC: clean out UAPI byteorder.h clean off Kconfig symbol
  irqchip: add nps Internal and external irqchips
  clocksource: Add NPS400 timers driver
  soc: Support for EZchip SoC
  Documentation: Add EZchip vendor to binding list
  ...
2016-05-19 09:46:18 -07:00
Vladimir Zapolskiy 8cb17b5ed0 irqchip: Add LPC32xx interrupt controller driver
The change adds improved support of NXP LPC32xx MIC, SIC1 and SIC2
interrupt controllers.

This is a list of new features in comparison to the legacy driver:
* irq types are taken from device tree settings, no more need to
  hardcode them,
* old driver is based on irq_domain_add_legacy, which causes problems
  with handling MIC hardware interrupt 0 produced by SIC1,
* there is one driver for MIC, SIC1 and SIC2, no more need to handle
  them separately, e.g. have two separate handlers for SIC1 and SIC2,
* the driver does not have any dependencies on hardcoded register
  offsets,
* the driver is much simpler for maintenance,
* SPARSE_IRQS option is supported.

Legacy LPC32xx interrupt controller driver was broken since commit
76ba59f836 ("genirq: Add irq_domain-aware core IRQ handler"), which
requires a private interrupt handler, otherwise any SIC1 generated
interrupt (mapped to MIC hwirq 0) breaks the kernel with the message
"unexpected IRQ trap at vector 00".

The change disables compilation of a legacy driver found at
arch/arm/mach-lpc32xx/irq.c, the file will be removed in a separate
commit.

Fixes: 76ba59f836 ("genirq: Add irq_domain-aware core IRQ handler")
Tested-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11 10:12:11 +01:00
Noam Camus 44df427c89 irqchip: add nps Internal and external irqchips
Adding EZchip NPS400 support.
Internal interrupts are handled by Multi Thread Manager (MTM)
Once interrupt is serviced MTM is acked for deactivating the interrupt.
External interrupts are handled by MTM as well as at Global Interrupt
Controller (GIC) e.g. serial and network devices.

Signed-off-by: Noam Camus <noamc@ezchip.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
2016-05-09 09:32:31 +05:30
Minghuan Lian b8f3ebe630 irqchip: Add Layerscape SCFG MSI controller support
Some kind of Freescale Layerscape SoC provides a MSI
implementation which uses two SCFG registers MSIIR and
MSIR to support 32 MSI interrupts for each PCIe controller.
The patch is to support it.

Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Tested-by: Alexander Stein <alexander.stein@systec-electronic.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-04 09:58:04 +01:00
Marc Zyngier 9e2c986cb4 irqchip: Add per-cpu interrupt partitioning library
We've unfortunately started seeing a situation where percpu interrupts
are partitioned in the system: one arbitrary set of CPUs has an
interrupt connected to a type of device, while another disjoint
set of CPUs has the same interrupt connected to another type of device.

This makes it impossible to have a device driver requesting this interrupt
using the current percpu-interrupt abstraction, as the same interrupt number
is now potentially claimed by at least two drivers, and we forbid interrupt
sharing on per-cpu interrupt.

A solution to this is to turn things upside down. Let's assume that our
system describes all the possible partitions for a given interrupt, and
give each of them a unique identifier. It is then possible to create
a namespace where the affinity identifier itself is a form of interrupt
number. At this point, it becomes easy to implement a set of partitions
as a cascaded irqchip, each affinity identifier being the HW irq.

This allows us to keep a number of nice properties:
- Each partition results in a separate percpu-interrupt (with a restrictied
  affinity), which keeps drivers happy.
- Because the underlying interrupt is still per-cpu, the overhead of
  the indirection can be kept pretty minimal.
- The core code can ignore most of that crap.

For that purpose, we implement a small library that deals with some of
the boilerplate code, relying on platform-specific drivers to provide
a description of the affinity sets and a set of callbacks.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Link: http://lkml.kernel.org/r/1460365075-7316-4-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-05-02 13:42:51 +02:00
Antoine Tenart e6b78f2c3e irqchip: Add the Alpine MSIX interrupt controller
This patch adds the Alpine MSIX interrupt controller driver.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-09 09:37:45 +00:00
Thomas Gleixner 16aba533fb irqchip core changes for v4.6 (round 2)
- mvebu:
    - Add odmi driver for Marvell 7K/8K SoCs
    - Replace driver-specific set_affinity with generic version
 
 - mips:
    - Move ath79 MISC and CPU drivers from arch/ code to irqchip/
 
 - tango:
    - Add support for Sigma Designs SMP8[67]xx ctrl
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJWyc/LAAoJEP45WPkGe8ZnUFUP/2IIftSnSACokXIcXjLPNJ+X
 YPtBSpxAjDGM1btHOFqeUvf/FEeFKbYvs57SSHA9WfjQSOuEfZInoeiOwEYIBtBp
 VYWRsQowVcBPre3jJLlG8Lf+MooC/bkAdesNSefdwvzT5yiYrscR8dFuJ3yG5SbI
 uu+YoDPMJhlDW0ePOJbWc+8ZoS5Y6CVpcHwO7AwI4uU9xSkZgOIa/P63QCTO7PI9
 4Mh835Qngvpvyv1El3C6cKZBBzSulDYqPzFuoc2MV2TeOlwYFVavMChC7yOmfy+E
 tOJNtWnMBOGQfPWpLjJ0sPz0rqYTRPDuspcp6/sbuAmeAZq+iwU00cueNPd3n26b
 7WgolO0uoMb0XHooXFeaL9EkDVOk+GZkCnisaytgrGDKZi4uUzFgiAxzMSEWfKTs
 XKavNbAKaUOldjkvfnbGUcytBU9DhhmKrnIqJtTwLbgnmD9mZdk/NyJrooHkROze
 G565vhJkYJk45kRXORJdeZ8BlwosSDqtPuzS6htn3LZo9H4bVWPigPbjtRxPHdSJ
 cRsA2op2GssGKIoreDx1do2Lm17K2oSI+VftrgG2vmzsvDr9RugqF1gPZ8B/ow5e
 ye8yhmlkRI5iIlAqFq5DaFUpVuY8PbBUe9RDOjRx4UInVGrniCmWpDNHhPEhMEuk
 rUounoqu2SxduQKuwGus
 =4dMI
 -----END PGP SIGNATURE-----

Merge tag 'irqchip-core-4.6-2' of git://git.infradead.org/users/jcooper/linux into irq/core

Pull the second round of irqchip core changes for v4.6 from Jason Cooper:

- mvebu:
   - Add odmi driver for Marvell 7K/8K SoCs
   - Replace driver-specific set_affinity with generic version

- mips:
   - Move ath79 MISC and CPU drivers from arch/ code to irqchip/

- tango:
   - Add support for Sigma Designs SMP8[67]xx ctrl
2016-02-21 20:54:18 +01:00
Thomas Gleixner fa00cb265e irqchip core changes for v4.6
- mvebu (armada-370-xp)
    - MSI support
    - Deconflict with mvebu's arm64 code
 
 - ts4800
    - Restrict when ts4800 driver can be built
    - Make ts4800_ic_ops static const
 
 - bcm2836: Drop superfluous memory barrier
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJWxykyAAoJEP45WPkGe8ZnrKAQAKmzSaWwCutG76RWj/SvcwcP
 ByP8fFNM9kvQQBi3mIjD+Au9TExPQznfcs/z5+dkNXzJItvA6WRXK0D6EeUZmm8q
 GRhQ0AAbTA9oCXPnKFJPlAJONIszQV8tlO5ArOWQ7rU5Gal9v4vPPeLYnlUcf4ZC
 MkrMxoY9hydLTlxzJPJU5r3Tx64E2vbkJ/gzFo/r25DPCvKE/Vqm9rjFVxNFgH7h
 nUycaDJaeFiXSng1t2krlOtdc160JsxUSAT5dKu3Q/gV/yOtCMhDtRlMPdjNhM1y
 ged0U1q03NobDLFgjV6DlEyGgQr3Mn5kpVbsvg+A12M/BFAiT1zNNzbLUbIj0rRs
 WdadRWXkmLUshSO84pMCNqtAesBcty0sjTcUoxOiGxifzfMHR/58pKbFXXAsuGjF
 Ra1Loyn7YPGxEbSHuWUzhE342PNErIizXFu228xa6YC/NhhrqrB8bd3U8olyqox6
 IoQ2cbZxjxYeLynMyyMGK+UqPFuQKB7Ib8kZpxRvtbYXYq3iUHils3wge4jRVNjT
 PDH5S2N1kqa8T+T3befbNnHWjXT4ohD3BGkW53vImPxDWGYhDxvcnaHtRTIt9BB8
 vPlfKKlOYI1m82yDm1v2WMgj+rE2XEEFNdRDNaP//DtOMdXmMOB52xq6ROks+GmC
 wIK82x6+yZHYx0mVtp1I
 =Omn0
 -----END PGP SIGNATURE-----

Merge tag 'irqchip-core-4.6' of git://git.infradead.org/users/jcooper/linux into irq/core

Pull irqchip core changes for v4.6 from Jason Cooper:

- mvebu (armada-370-xp)
   - MSI support
   - Deconflict with mvebu's arm64 code

- ts4800
   - Restrict when ts4800 driver can be built
   - Make ts4800_ic_ops static const

- bcm2836: Drop superfluous memory barrier
2016-02-21 20:53:46 +01:00
Jason Cooper 1ad9a57633 Merge branch 'irqchip/mvebu' into irqchip/core 2016-02-21 14:47:04 +00:00
Jason Cooper 7cf03c9fe5 Merge branch 'irqchip/mips' into irqchip/core 2016-02-21 14:46:27 +00:00
Jason Cooper 55e10798f6 Merge branch 'irqchip/tango' into irqchip/core 2016-02-21 14:46:12 +00:00
Thomas Petazzoni c27f29bbbf irqchip/mvebu-odmi: Add new driver for platform MSI on Marvell 7K/8K
This commits adds a new irqchip driver that handles the ODMI
controller found on Marvell 7K/8K processors. The ODMI controller
provide MSI interrupt functionality to on-board peripherals, much like
the GIC-v2m.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1455888883-5127-1-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-02-19 15:34:33 +00:00
Mans Rullgard 4bba66899a irqchip/tango: Add support for Sigma Designs SMP86xx/SMP87xx interrupt controller
This adds support for the secondary interrupt controller used in Sigma
Designs SMP86xx and SMP87xx chips.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1453313237-18570-2-git-send-email-mans@mansr.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-02-18 01:18:14 +00:00
Alban Bedel 81ffb18ce4 irqchip/ath79-cpu: Move the CPU IRQ driver from arch/mips/ath79/
Signed-off-by: Alban Bedel <albeu@free.fr>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1453553867-27003-2-git-send-email-albeu@free.fr
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-02-17 13:47:19 +00:00
Alban Bedel 07ba4b061a irqchip/ath79-misc: Move the MISC driver from arch/mips/ath79/
The driver stays the same but the initialization changes a bit.
For OF boards we now get the memory map from the OF node and use
a linear mapping instead of the legacy mapping. For legacy boards
we still use a legacy mapping and just pass down all the parameters
from the board init code.

Signed-off-by: Alban Bedel <albeu@free.fr>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1453553867-27003-1-git-send-email-albeu@free.fr
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-02-17 13:44:31 +00:00
Thomas Petazzoni fed6d33631 irqchip/armada-370-xp: Add Kconfig option for the driver
Instead of building the irq-armada-370-xp driver directly when
CONFIG_ARCH_MVEBU is enabled, this commit introduces an intermediate
CONFIG_ARMADA_370_XP_IRQ hidden Kconfig option.

This allows this option to select other interrupt-related Kconfig
options (which will be needed in follow-up commits) rather than having
such selects done from arch/arm/mach-<foo>/.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1455115621-22846-2-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-02-16 17:36:16 +00:00
Simon Arlott c7c42ec2ba irqchips/bmips: Add bcm6345-l1 interrupt controller
Add the BCM6345 interrupt controller based on the SMP-capable BCM7038
and the BCM3380 but with packed interrupt registers.

Add the BCM6345 interrupt controller to a list with the existing BCM7038
so that interrupts on CPU1 are not ignored.

Update the maintainers file list for BMIPS to include this driver.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: linux-mips@linux-mips.org
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Rob Herring <robh@kernel.org>
Link: http://lkml.kernel.org/r/5651D176.6030908@simon.arlott.org.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-08 15:03:42 +01:00
Linus Torvalds e2464688b5 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.5 plus some 4.4 fixes.

  The executive summary:

   - ATH79 platform improvments, use DT bindings for the ATH79 USB PHY.
   - Avoid useless rebuilds for zboot.
   - jz4780: Add NEMC, BCH and NAND device tree nodes
   - Initial support for the MicroChip's DT platform.  As all the device
     drivers are missing this is still of limited use.
   - Some Loongson3 cleanups.
   - The unavoidable whitespace polishing.
   - Reduce clock skew when synchronizing the CPU cycle counters on CPU
     startup.
   - Add MIPS R6 fixes.
   - Lots of cleanups across arch/mips as fallout from KVM.
   - Lots of minor fixes and changes for IEEE 754-2008 support to the
     FPU emulator / fp-assist software.
   - Minor Ralink, BCM47xx and bcm963xx platform support improvments.
   - Support SMP on BCM63168"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits)
  MIPS: zboot: Add support for serial debug using the PROM
  MIPS: zboot: Avoid useless rebuilds
  MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB
  MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function
  MIPS: bcm963xx: Update bcm_tag field image_sequence
  MIPS: bcm963xx: Move extended flash address to bcm_tag header file
  MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure
  MIPS: bcm63xx: nvram: Use nvram structure definition from header file
  MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure
  MAINTAINERS: Add KVM for MIPS entry
  MIPS: KVM: Add missing newline to kvm_err()
  MIPS: Move KVM specific opcodes into asm/inst.h
  MIPS: KVM: Use cacheops.h definitions
  MIPS: Break down cacheops.h definitions
  MIPS: Use EXCCODE_ constants with set_except_vector()
  MIPS: Update trap codes
  MIPS: Move Cause.ExcCode trap codes to mipsregs.h
  MIPS: KVM: Make kvm_mips_{init,exit}() static
  MIPS: KVM: Refactor added offsetof()s
  MIPS: KVM: Convert EXPORT_SYMBOL to _GPL
  ...
2016-01-24 12:50:56 -08:00
Cristian Birsan aaa8666ada IRQCHIP: irq-pic32-evic: Add support for PIC32 interrupt controller
This adds support for the interrupt controller present on PIC32 class
devices. It handles all internal and external interrupts. This controller
exists outside of the CPU core and is the arbitrator of all interrupts
(including interrupts from the CPU itself) before they are presented to
the CPU.

The following features are supported:
 - DT properties for EVIC and for devices/peripherals that use interrupt lines
 - Persistent and non-persistent interrupt handling
 - irqdomain and generic chip support
 - Configuration of external interrupt edge polarity

Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12092/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24 02:52:20 +01:00
Damien Riegel d01f8633d5 irqchip/ts4800: Add TS-4800 interrupt controller
This commit adds support for the TS-4800 interrupt controller. This
controller is instantiated in a companion FPGA, and multiplex interrupts
for other FPGA IPs.

As this component is external to the SoC, the SoC might need to reserve
pins, so this controller is implemented as a platform driver and doesn't
use the IRQCHIP_DECLARE construct.

Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: kernel@savoirfairelinux.com
Link: http://lkml.kernel.org/r/1450728683-31416-2-git-send-email-damien.riegel@savoirfairelinux.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-29 11:58:53 +01:00
Thomas Gleixner 4e8dbe9e93 Merge branch 'irq/gic-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull the GIC related updates from Marc Zyngier:

 "Not a lot this time (what a relief!), but an interesting series from
  Linus Walleij coming out of his work converting the ARM RealView
  platforms to DT, and a couple of mundane fixes."
2015-12-19 12:16:20 +01:00
Ma Jun 717c3dbc11 irqchip/mgigen: Add platform device driver for mbigen device
Mbigen means Message Based Interrupt Generator(MBIGEN).

Its a kind of interrupt controller that collects
the interrupts from external devices and generate msi interrupt.
Mbigen is applied to reduce the number of wire connected interrupts.

As the peripherals increasing, the interrupts lines needed is
increasing much, especially on the Arm64 server SOC.

Therefore, the interrupt pin in GIC is not enough to cover so
many peripherals.

Mbigen is designed to fix this problem.

Mbigen chip locates in ITS or outside of ITS.

Mbigen chip hardware structure shows as below:

		mbigen chip
|---------------------|-------------------|
mgn_node0	  mgn_node1		mgn_node2
 |		 |-------|		|-------|------|
dev1		dev1    dev2		dev1   dev3   dev4

Each mbigen chip contains several mbigen nodes.

External devices can connect to mbigen node through wire connecting way.

Because a mbigen node only can support 128 interrupt maximum, depends
on the interrupt lines number of devices, a device can connects to one
more mbigen nodes.

Also, several different devices can connect to a same mbigen node.

When devices triggered interrupt,mbigen chip detects and collects
the interrupts and generates the MBI interrupts by writing the ITS
Translator register.

To simplify mbigen driver,I used a new conception--mbigen device.
Each mbigen device is initialized as a platform device.

Mbigen device presents the parts(register, pin definition etc.) in
mbigen chip corresponding to a peripheral device.

So from software view, the structure likes below

	            mbigen chip
     |---------------------|-----------------|
mbigen device1       mbigen device2  mbigen device3
      |                   |                |
     dev1                dev2             dev3

Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Ma Jun <majun258@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-18 11:44:20 +00:00
Linus Walleij 8673c1d7e8 irqchip/gic: Support RealView variant setup
The ARM RealView PB11MPCore reference design has some special
bits in a system controller register to set up the GIC in one
of three modes: legacy, new with DCC, new without DCC. The
register is also used to enable FIQ.

Since the platform will not boot unless this register is set
up to "new with DCC" mode, we need a special quirk to be
compiled-in for the RealView platforms.

If we find the right compatible string on the GIC TestChip,
we enable this quirk by looking up the system controller and
enabling the special bits.

We depend on the CONFIG_REALVIEW_DT Kconfig symbol as the old
boardfile code has the same fix hardcoded, and this is only
needed for the attempts to modernize the RealView code using
device tree.

After fixing this, the PB11MPCore boots with device tree
only.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-16 15:30:50 +00:00
Oleksij Rempel 7e4ac676ee irqchip/mxs: Add Alphascale ASM9260 support
Freescale iMX23/iMX28 and Alphascale ASM9260 have similar interrupt
collectors. We already prepared the mxs driver to handle a different
register layout. Add the actual ASM9260 support.

Differences between these devices:
- Different register offsets
- Different count of interupt lines per register
- ASM9260 does not provide reset bit
- ASM9260 does not support FIQ.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Tested-by: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: marc.zyngier@arm.com
Cc: jason@lakedaemon.net
Link: http://lkml.kernel.org/r/1444677334-12242-6-git-send-email-linux@rempel-privat.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-14 09:37:47 +02:00
Shenwei Wang e324c4dc4a irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources
IMX7D contains a new version of GPC IP block (GPCv2). It has two major
functions: power management and wakeup source management.

When the system is in WFI (wait for interrupt) mode, the GPC block
will be the first block on the platform to be activated and signaled.

In normal wait mode during cpu idle, the system can be woken up by any
enabled interrupts. In standby or suspend mode, the system can only be
wokem up by the pre-defined wakeup sources.

Based-on-patch-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <shawn.guo@linaro.org>
Cc: <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1440443055-7291-1-git-send-email-shenwei.wang@freescale.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-24 21:49:34 +02:00
Eric Anholt 1a15aaa998 irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2
This interrupt controller is the new root interrupt controller with
the timer, PMU events, and IPIs, and the bcm2835's interrupt
controller is chained off of it to handle the peripherals.

I wrote the interrupt chip support, while Andrea Merello wrote the IPI
code.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Cc: linux-rpi-kernel@lists.infradead.org
Cc: Lee Jones <lee@kernel.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1438902033-31477-5-git-send-email-eric@anholt.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-20 22:38:42 +02:00
Ralf Baechle 0509cfde03 MIPS/irqchip: Move i8259 irqchip driver to drivers/irqchip
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-31 22:04:49 +02:00
Marc Zyngier 1e6db00048 irqchip/gicv3-its: Add platform MSI support
In order to support non-PCI MSI with the GICv3 ITS, add the minimal
required entry points for the MSI domain (an msi_prepare implementation).

The rest is only boilerplate code to find the raw ITS domain.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Yijing Wang <wangyijing@huawei.com>
Cc: Ma Jun <majun258@huawei.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Duc Dang <dhdang@apm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1438091186-10244-16-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30 00:14:38 +02:00
Marc Zyngier f130420e51 irqchip/gicv3-its: Split PCI/MSI code from the core ITS driver
It is becoming obvious that having the PCI/MSI code in the same
file as the the core ITS code is giving people implementing non-PCI
MSI support the wrong kind of idea.

In order to make things a bit clearer, let's move the PCI/MSI code
out to its own file. Hopefully it will make it clear that whoever
thinks of hooking into the core ITS better have a very strong point.

We use a temporary entry point that will get removed in a subsequent
patch, once the proper infrastructure is added.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Yijing Wang <wangyijing@huawei.com>
Cc: Ma Jun <majun258@huawei.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Duc Dang <dhdang@apm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1438091186-10244-12-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30 00:14:38 +02:00
Linus Torvalds 78c10e556e Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:

 - Improvements to the tlb_dump code
 - KVM fixes
 - Add support for appended DTB
 - Minor improvements to the R12000 support
 - Minor improvements to the R12000 support
 - Various platform improvments for BCM47xx
 - The usual pile of minor cleanups
 - A number of BPF fixes and improvments
 - Some improvments to the support for R3000 and DECstations
 - Some improvments to the ATH79 platform support
 - A major patchset for the JZ4740 SOC adding support for the CI20 platform
 - Add support for the Pistachio SOC
 - Minor BMIPS/BCM63xx platform support improvments.
 - Avoid "SYNC 0" as memory barrier when unlocking spinlocks
 - Add support for the XWR-1750 board.
 - Paul's __cpuinit/__cpuinitdata cleanups.
 - New Malta CPU board support large memory so enable ZONE_DMA32.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits)
  MIPS: spinlock: Adjust arch_spin_lock back-off time
  MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA
  MIPS: BCM47xx: Simplify handling SPROM revisions
  MIPS: Cobalt Don't use module_init in non-modular MTD registration.
  MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/
  MIPS: use for_each_sg()
  MIPS: BCM47xx: Don't select BCMA_HOST_PCI
  MIPS: BCM47xx: Add helper variable for storing NVRAM length
  MIPS: IRQ/IP27: Move IRQ allocation API to platform code.
  MIPS: Replace smp_mb with release barrier function in unlocks.
  MIPS: i8259: DT support
  MIPS: Malta: Basic DT plumbing
  MIPS: include errno.h for ENODEV in mips-cm.h
  MIPS: Define GCR_GIC_STATUS register fields
  MIPS: BPF: Introduce BPF ASM helpers
  MIPS: BPF: Use BPF register names to describe the ABI
  MIPS: BPF: Move register definition to the BPF header
  MIPS: net: BPF: Replace RSIZE with SZREG
  MIPS: BPF: Free up some callee-saved registers
  MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers
  ...
2015-06-27 12:44:34 -07:00
Linus Torvalds e8a0b37d28 Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
 "Bigger items included in this update are:

   - A series of updates from Arnd for ARM randconfig build failures
   - Updates from Dmitry for StrongARM SA-1100 to move IRQ handling to
     drivers/irqchip/
   - Move ARMs SP804 timer to drivers/clocksource/
   - Perf updates from Mark Rutland in preparation to move the ARM perf
     code into drivers/ so it can be shared with ARM64.
   - MCPM updates from Nicolas
   - Add support for taking platform serial number from DT
   - Re-implement Keystone2 physical address space switch to conform to
     architecture requirements
   - Clean up ARMv7 LPAE code, which goes in hand with the Keystone2
     changes.
   - L2C cleanups to avoid unlocking caches if we're prevented by the
     secure support to unlock.
   - Avoid cleaning a potentially dirty cache containing stale data on
     CPU initialisation
   - Add ARM-only entry point for secondary startup (for machines that
     can only call into a Thumb kernel in ARM mode).  Same thing is also
     done for the resume entry point.
   - Provide arch_irqs_disabled via asm-generic
   - Enlarge ARMv7M vector table
   - Always use BFD linker for VDSO, as gold doesn't accept some of the
     options we need.
   - Fix an incorrect BSYM (for Thumb symbols) usage, and convert all
     BSYM compiler macros to a "badr" (for branch address).
   - Shut up compiler warnings provoked by our cmpxchg() implementation.
   - Ensure bad xchg sizes fail to link"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (75 commits)
  ARM: Fix build if CLKDEV_LOOKUP is not configured
  ARM: fix new BSYM() usage introduced via for-arm-soc branch
  ARM: 8383/1: nommu: avoid deprecated source register on mov
  ARM: 8391/1: l2c: add options to overwrite prefetching behavior
  ARM: 8390/1: irqflags: Get arch_irqs_disabled from asm-generic
  ARM: 8387/1: arm/mm/dma-mapping.c: Add arm_coherent_dma_mmap
  ARM: 8388/1: tcm: Don't crash when TCM banks are protected by TrustZone
  ARM: 8384/1: VDSO: force use of BFD linker
  ARM: 8385/1: VDSO: group link options
  ARM: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations
  ARM: remove __bad_xchg definition
  ARM: 8369/1: ARMv7M: define size of vector table for Vybrid
  ARM: 8382/1: clocksource: make ARM_TIMER_SP804 depend on GENERIC_SCHED_CLOCK
  ARM: 8366/1: move Dual-Timer SP804 driver to drivers/clocksource
  ARM: 8365/1: introduce sp804_timer_disable and remove arm_timer.h inclusion
  ARM: 8364/1: fix BE32 module loading
  ARM: 8360/1: add secondary_startup_arm prototype in header file
  ARM: 8359/1: correct secondary_startup_arm mode
  ARM: proc-v7: sanitise and document registers around errata
  ARM: proc-v7: clean up MIDR access
  ...
2015-06-26 12:20:00 -07:00
Yoshinori Sato 8a7644821a h8300: IRQ chip driver
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2015-06-23 13:35:56 +09:00
Paul Burton 44e08e7099 MIPS/IRQCHIP: Move Ingenic SoC intc driver to drivers/irqchip
Move the driver for Ingenic SoC interrupt controllers into
drivers/irqchip where it belongs.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10147/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:10 +02:00
Ralf Baechle 67e38cf293 MIPS/IRQCHIP: Move irq_chip from arch/mips to drivers/irqchip.
While at it, rename it because in drivers/irqchip no longer every CPU is
a MIPS.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:52:50 +02:00
Dmitry Eremin-Solenikov 22b67acd99 ARM: 8368/1: sa1100: move irq driver to drivers/irqchip/
Move current sa11x0 IRQ driver to the irqchip subsystem.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-05-28 14:40:03 +01:00
Linus Torvalds bfaf245022 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for Linux 4.1.  Most
  noteworthy:

   - Add more Octeon-optimized crypto functions
   - Octeon crypto preemption and locking fixes
   - Little endian support for Octeon
   - Use correct CSR to soft reset Octeons
   - Support LEDs on the Octeon-based DSR-1000N
   - Fix PCI interrupt mapping for the Octeon-based DSR-1000N
   - Mark prom_free_prom_memory() as __init for a number of systems
   - Support for Imagination's Pistachio SOC.  This includes arch and
     CLK bits.  I'd like to merge pinctrl bits later
   - Improve parallelism of csum_partial for certain pipelines
   - Organize DTB files in subdirs like other architectures
   - Implement read_sched_clock for all MIPS platforms other than
     Octeon
   - Massive series of 38 fixes and cleanups for the FPU emulator /
     kernel
   - Further FPU remulator work to support new features.  This sits on a
     separate branch which also has been pulled into the 4.1 KVM branch
   - Clean up and fixes for the SEAD3 eval board; remove unused file
   - Various updates for Netlogic platforms
   - A number of small updates for Loongson 3 platforms
   - Increase the memory limit for ATH79 platforms to 256MB
   - A fair number of fixes and updates for BCM47xx platforms
   - Finish the implementation of XPA support
   - MIPS FDC support.  No, not floppy controller but Fast Debug Channel :)
   - Detect the R16000 used in SGI legacy platforms
   - Fix Kconfig dependencies for the SSB bus support"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (265 commits)
  MIPS: Makefile: Fix MIPS ASE detection code
  MIPS: asm: elf: Set O32 default FPU flags
  MIPS: BCM47XX: Fix detecting Microsoft MN-700 & Asus WL500G
  MIPS: Kconfig: Disable SMP/CPS for 64-bit
  MIPS: Hibernate: flush TLB entries earlier
  MIPS: smp-cps: cpu_set FPU mask if FPU present
  MIPS: lose_fpu(): Disable FPU when MSA enabled
  MIPS: ralink: add missing symbol for RALINK_ILL_ACC
  MIPS: ralink: Fix bad config symbol in PCI makefile.
  SSB: fix Kconfig dependencies
  MIPS: Malta: Detect and fix bad memsize values
  Revert "MIPS: Avoid pipeline stalls on some MIPS32R2 cores."
  MIPS: Octeon: Delete override of cpu_has_mips_r2_exec_hazard.
  MIPS: Fix cpu_has_mips_r2_exec_hazard.
  MIPS: kernel: entry.S: Set correct ISA level for mips_ihb
  MIPS: asm: spinlock: Fix addiu instruction for R10000_LLSC_WAR case
  MIPS: r4kcache: Use correct base register for MIPS R6 cache flushes
  MIPS: Kconfig: Fix typo for the r2-to-r6 emulator kernel parameter
  MIPS: unaligned: Fix regular load/store instruction emulation for EVA
  MIPS: unaligned: Surround load/store macros in do {} while statements
  ...
2015-04-17 15:50:54 -04:00
Jason Cooper 37b25fffd1 Merge branch 'irqchip/stacked-tegra' into irqchip/core 2015-04-10 22:57:53 +00:00