Previously the part behind "perf-" was interpreted as an internal perf
command. If the suffix could not be handled, the execution was stopped.
This makes it impossible to launch perf binaries that got renamed to
have the `perf-` prefix. This is e.g. the case for appimages (e.g.
"perf-x86_64.AppImage"), but would also apply to all other scenarios
where users symlink or rename perf themselves:
Status quo with the broken behavior:
$ ln -s ./perf ./perf-custom-suffix
$ ./perf-custom-suffix list
cannot handle custom-suffix internally$
Also note the missing newline at the end of the error message.
With this patch applied, the above works properly:
$ ./perf-custom-suffix list
List of pre-defined events (to be used in -e):
...
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170911111422.31903-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently section->from_system_config is being checked multiple times.
item->from_system_config should be checked instead, when iterating thru
the items in a section. Fix it.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1504754325-9724-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We currently update the 'next' variable only with a single step value.
But it's possible the 'adv' update is bigger than single 'step' value.
This would leave 'next' value under counted and force unnecessary
ui_progress__ops->update calls.
Calculate the amount of steps we need for 'adv' update and increase the
'next' with that amounts of steps.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170908120510.22515-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Unlikely, but we could have ui_progress__init being called with total <
16, which would set the next and step variables to 0. That would force
unnecessary ui_progress__ops->update calls because 'next' would never
raise.
Forcing the next and step values to be always > 0.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170908120510.22515-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do not carry the perf.data file descriptor into the workload process and
close it when perf executes the workload.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170908084621.31595-2-jolsa@kernel.org
[ Add definitions for O_CLOEXEC for older systems ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When cross compiling perf and I want to link against a self-compiled
libunwind, I usually make the custom path where the libunwind headers
exist visible by adding the libunwind prefix to the include path when
compiling perf, i.e.:
~~~~~
$ ls $HOME/projects/compiled/other/include/
libunwind-coredump.h libunwind.h libunwind-x86_64.h
libunwind-common.h libunwind-dynamic.h libunwind-ptrace.h
unwind.h
$ make EXTRA_CFLAGS="-I$HOME/projects/compiled/other/include/
~~~~~~
Note the `unwind.h` header from libunwind which leads to compile
errors when compiling tests/dwarf-unwind.c, since it shadows perf's
util/unwind.h:
~~~~~
tests/dwarf-unwind.c:41:32: error: ‘struct unwind_entry’ declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
static int unwind_entry(struct unwind_entry *entry, void *arg)
^~~~~~~~~~~~
tests/dwarf-unwind.c: In function ‘unwind_entry’:
tests/dwarf-unwind.c:44:22: error: dereferencing pointer to incomplete type ‘struct unwind_entry’
char *symbol = entry->sym ? entry->sym->name : NULL;
^~
tests/dwarf-unwind.c: In function ‘unwind_thread’:
tests/dwarf-unwind.c:92:8: error: implicit declaration of function ‘unwind__get_entries’; did you mean ‘unwind_entry’? [-Werror=implicit-function-declaration]
err = unwind__get_entries(unwind_entry, &cnt, thread,
^~~~~~~~~~~~~~~~~~~
unwind_entry
tests/dwarf-unwind.c:92:8: error: nested extern declaration of ‘unwind__get_entries’ [-Werror=nested-externs]
~~~~~~
Fix this compile error by specificing an explicit include of perf's
unwind.h in the util folder.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170906150209.12579-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Here is the big char/misc driver update for 4.14-rc1.
Lots of different stuff in here, it's been an active development cycle
for some reason. Highlights are:
- updated binder driver, this brings binder up to date with what
shipped in the Android O release, plus some more changes that
happened since then that are in the Android development trees.
- coresight updates and fixes
- mux driver file renames to be a bit "nicer"
- intel_th driver updates
- normal set of hyper-v updates and changes
- small fpga subsystem and driver updates
- lots of const code changes all over the driver trees
- extcon driver updates
- fmc driver subsystem upadates
- w1 subsystem minor reworks and new features and drivers added
- spmi driver updates
Plus a smattering of other minor driver updates and fixes.
All of these have been in linux-next with no reported issues for a
while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa1+Ew8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl26wCgquufNylfhxr65NbJrovduJYzRnUAniCivXg8
bePIh/JI5WxWoHK+wEbY
=hYWx
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver update for 4.14-rc1.
Lots of different stuff in here, it's been an active development cycle
for some reason. Highlights are:
- updated binder driver, this brings binder up to date with what
shipped in the Android O release, plus some more changes that
happened since then that are in the Android development trees.
- coresight updates and fixes
- mux driver file renames to be a bit "nicer"
- intel_th driver updates
- normal set of hyper-v updates and changes
- small fpga subsystem and driver updates
- lots of const code changes all over the driver trees
- extcon driver updates
- fmc driver subsystem upadates
- w1 subsystem minor reworks and new features and drivers added
- spmi driver updates
Plus a smattering of other minor driver updates and fixes.
All of these have been in linux-next with no reported issues for a
while"
* tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (244 commits)
ANDROID: binder: don't queue async transactions to thread.
ANDROID: binder: don't enqueue death notifications to thread todo.
ANDROID: binder: Don't BUG_ON(!spin_is_locked()).
ANDROID: binder: Add BINDER_GET_NODE_DEBUG_INFO ioctl
ANDROID: binder: push new transactions to waiting threads.
ANDROID: binder: remove proc waitqueue
android: binder: Add page usage in binder stats
android: binder: fixup crash introduced by moving buffer hdr
drivers: w1: add hwmon temp support for w1_therm
drivers: w1: refactor w1_slave_show to make the temp reading functionality separate
drivers: w1: add hwmon support structures
eeprom: idt_89hpesx: Support both ACPI and OF probing
mcb: Fix an error handling path in 'chameleon_parse_cells()'
MCB: add support for SC31 to mcb-lpc
mux: make device_type const
char: virtio: constify attribute_group structures.
Documentation/ABI: document the nvmem sysfs files
lkdtm: fix spelling mistake: "incremeted" -> "incremented"
perf: cs-etm: Fix ETMv4 CONFIGR entry in perf.data file
nvmem: include linux/err.h from header
...
The popup help accessed via 'h' wasn't mentioning about TAB and
shift-TAB, just about 'H', which goes to the hottest line, while the
former two are the hotkeys for actually cycling thru the hottest lines.
Reported-by: Flavio Bruno Leitner <fbl@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-5ppym6odizfj1ifa4t7neiku@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Peter reported that when he explicitely asked for multiple events with
the same name on the command line it got coalesced into just one line,
i.e.:
# perf stat -e cycles -e cycles -e cycles usleep 1
Performance counter stats for 'usleep 1':
3,269,652 cycles
0.000884123 seconds time elapsed
#
And while there is the --no-merges option to disable that auto-merging,
this is a blunt change in behaviour for such explicit request, so change
the code so that this auto merging is done only when handling the multi
PMU aliases with the same name that introduced this coalescing,
restoring the previous behaviour for the explicit case:
# perf stat -e cycles -e cycles -e cycles usleep 1
Performance counter stats for 'usleep 1':
1,472,837 cycles
1,472,837 cycles
1,472,837 cycles
0.001764870 seconds time elapsed
#
Reported-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 430daf2dc7 ("perf stat: Collapse identically named events")
Link: http://lkml.kernel.org/r/20170831184122.GK4831@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend sample-parsing test cases to support new sample type
PERF_SAMPLE_PHYS_ADDR.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504026672-7304-6-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Display the physical address at the tail if it is available.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504026672-7304-5-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add option phys-data in "perf mem" to record/report physical address.
The default mem sort order for physical address is changed accordingly.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504026672-7304-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new sort option "phys_daddr" for --mem-mode sort. With this
option applied, perf can sort and report by sample's physical address.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504026672-7304-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support new sample type PERF_SAMPLE_PHYS_ADDR for physical address.
Add new option --phys-data to record sample physical address.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504026672-7304-2-git-send-email-kan.liang@intel.com
[ Added missing printing in evsel.c patch sent by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some POWER PMU event names have multiple/alternate event codes. These
alternate event codes were listed in the POWER9 JSON files for
reference.
But the perf tool does not seem to handle duplicates cleanly. 'perf
list' shows such duplicate events only once, but 'perf stat' ends up
counting the first event code twice, multiplexing if necessary and we
end up with double the event counts.
Remove the duplicate event codes from the JSON files for now.
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/20170830231506.GB20351@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As specified in tools/perf/Documentation/perf-config.txt, perf
configuration items must be in 'key = value' format, otherwise the
following error message occurs:
$ perf record -e intel_pt//u -- ls
bad config file line 2 in ~/.perfconfig
$ cat .perfconfig
[intel-pt]
mispred-all
Changing to assigning a value to the key 'mispred-all' fixes the issue:
$ perf record -e intel_pt//u -- ls
[ perf record: Woken up 1 times to write data ]
[ perf record: Capured and wrote 0.031 MB perf.data]
$ cat .perfconfig
[intel-pt]
mispred-all = true
Signed-off-by: Jack Henschel <jackdev@mailbox.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170831080535.2157-1-jackdev@mailbox.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'Object code reading' test always fails on powerpc guest. Two reasons
for the failure are:
1. When elf section is too big (size beyond 'unsigned int' max value).
objdump fails to disassemble from such section. This was fixed with
commit 0f6329bd7fc ("binutils/objdump: Fix disassemble for huge elf
sections") in binutils.
2. When the sample is from hypervisor. Hypervisor symbols can not be
resolved within guest and thus thread__find_addr_map() fails for such
symbols. Fix this by ignoring hypervisor symbols in the test.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1504170896-7876-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With two new methods, one to find the first match, returning its syscall
id and its index in whatever internal database it keeps the syscall
into, then one to find the next match, if any.
Implemented only on arches where we actually read the syscall table from
the kernel sources, i.e. x86-64 for now, all the others use the libaudit
method for which this returns -1, i.e. just stubs were added, with the
actual implementation using whatever libaudit functions for matching
that may be available.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-i0sj4rxk1a63pfe9gl8z8irs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The branch history code has a loop detection function. With this, we can
get the number of iterations by calculating the removed loops.
While it would be nice for knowing the average cycles of iterations.
This patch adds up the cycles in branch entries of removed loops and
save the result to the next branch entry (e.g. branch entry A).
Finally it will display the iteration number and average cycles at the
"from" of branch entry A.
For example:
perf record -g -j any,save_type ./div
perf report --branch-history --no-children --stdio
--22.63%--main div.c:42 (RET CROSS_2M)
compute_flag div.c:28 (cycles:2 iter:173115 avg_cycles:2)
|
--10.73%--compute_flag div.c:27 (RET CROSS_2M)
rand rand.c:28 (cycles:1)
rand rand.c:28 (RET CROSS_2M)
__random random.c:298 (cycles:1)
__random random.c:297 (COND_BWD CROSS_2M)
__random random.c:295 (cycles:1)
__random random.c:295 (COND_BWD CROSS_2M)
__random random.c:295 (cycles:1)
__random random.c:295 (RET CROSS_2M)
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1502111115-18305-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On x86, the plt header size is as same as the plt entry size, and can be
identified from shdr's sh_entsize of the plt.
But we can't assume that the sh_entsize of the plt shdr is always the
plt entry size in all architecture, and the plt header size may be not
as same as the plt entry size in some architecure.
On ARM, the plt header size is 20 bytes and the plt entry size is 12
bytes (don't consider the FOUR_WORD_PLT case) that refer to the binutils
implementation. The plt section is as follows:
Disassembly of section .plt:
000004a0 <__cxa_finalize@plt-0x14>:
4a0: e52de004 push {lr} ; (str lr, [sp, #-4]!)
4a4: e59fe004 ldr lr, [pc, #4] ; 4b0 <_init+0x1c>
4a8: e08fe00e add lr, pc, lr
4ac: e5bef008 ldr pc, [lr, #8]!
4b0: 00008424 .word 0x00008424
000004b4 <__cxa_finalize@plt>:
4b4: e28fc600 add ip, pc, #0, 12
4b8: e28cca08 add ip, ip, #8, 20 ; 0x8000
4bc: e5bcf424 ldr pc, [ip, #1060]! ; 0x424
000004c0 <printf@plt>:
4c0: e28fc600 add ip, pc, #0, 12
4c4: e28cca08 add ip, ip, #8, 20 ; 0x8000
4c8: e5bcf41c ldr pc, [ip, #1052]! ; 0x41c
On AARCH64, the plt header size is 32 bytes and the plt entry size is 16
bytes. The plt section is as follows:
Disassembly of section .plt:
0000000000000560 <__cxa_finalize@plt-0x20>:
560: a9bf7bf0 stp x16, x30, [sp,#-16]!
564: 90000090 adrp x16, 10000 <__FRAME_END__+0xf8a8>
568: f944be11 ldr x17, [x16,#2424]
56c: 9125e210 add x16, x16, #0x978
570: d61f0220 br x17
574: d503201f nop
578: d503201f nop
57c: d503201f nop
0000000000000580 <__cxa_finalize@plt>:
580: 90000090 adrp x16, 10000 <__FRAME_END__+0xf8a8>
584: f944c211 ldr x17, [x16,#2432]
588: 91260210 add x16, x16, #0x980
58c: d61f0220 br x17
0000000000000590 <__gmon_start__@plt>:
590: 90000090 adrp x16, 10000 <__FRAME_END__+0xf8a8>
594: f944c611 ldr x17, [x16,#2440]
598: 91262210 add x16, x16, #0x988
59c: d61f0220 br x17
NOTES:
In addition to ARM and AARCH64, other architectures, such as
s390/alpha/mips/parisc/poperpc/sh/sparc/xtensa also need to consider
this issue.
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: David Tolnay <dtolnay@gmail.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: zhangmengting@huawei.com
Link: http://lkml.kernel.org/r/1496622849-21877-1-git-send-email-huawei.libin@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 9aaf5a5f47 ("perf probe: Check kprobes blacklist when
adding new events"), 'perf probe' supports checking the blacklist of the
fuctions which can not be probed. But the checking condition is wrong,
that the end_addr of the symbol which is the start_addr of the next
symbol can't be included.
Committer notes:
IOW make it match its kernel counterpart in kernel/kprobes.c:
bool within_kprobe_blacklist(unsigned long addr)
Each entry have as its end address not its end address, but the first
address _outside_ that symbol, which for related functions, is the first
address of the next symbol, like these from kernel/trace/trace_probe.c:
0xffffffffbd198df0-0xffffffffbd198e40 print_type_u8
0xffffffffbd198e40-0xffffffffbd198e90 print_type_u16
0xffffffffbd198e90-0xffffffffbd198ee0 print_type_u32
0xffffffffbd198ee0-0xffffffffbd198f30 print_type_u64
0xffffffffbd198f30-0xffffffffbd198f80 print_type_s8
0xffffffffbd198f80-0xffffffffbd198fd0 print_type_s16
0xffffffffbd198fd0-0xffffffffbd199020 print_type_s32
0xffffffffbd199020-0xffffffffbd199070 print_type_s64
0xffffffffbd199070-0xffffffffbd1990c0 print_type_x8
0xffffffffbd1990c0-0xffffffffbd199110 print_type_x16
0xffffffffbd199110-0xffffffffbd199160 print_type_x32
0xffffffffbd199160-0xffffffffbd1991b0 print_type_x64
But not always:
0xffffffffbd1997b0-0xffffffffbd1997c0 fetch_kernel_stack_address (kernel/trace/trace_probe.c)
0xffffffffbd1c57f0-0xffffffffbd1c58b0 __context_tracking_enter (kernel/context_tracking.c)
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: zhangmengting@huawei.com
Fixes: 9aaf5a5f47 ("perf probe: Check kprobes blacklist when adding new events")
Link: http://lkml.kernel.org/r/1504011443-7269-1-git-send-email-huawei.libin@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reuse 'mprotect' beautifiers for 'pkey_mprotect'.
System wide tracing pkey_alloc, pkey_free and pkey_mprotect calls, with
backtraces:
# perf trace -e pkey_alloc,pkey_mprotect,pkey_free --max-stack=5
0.000 ( 0.011 ms): pkey/7818 pkey_alloc(init_val: DISABLE_ACCESS|DISABLE_WRITE) = -1 EINVAL Invalid argument
syscall (/usr/lib64/libc-2.25.so)
pkey_alloc (/home/acme/c/pkey)
0.022 ( 0.003 ms): pkey/7818 pkey_mprotect(start: 0x7f28c3890000, len: 4096, prot: READ|WRITE, pkey: -1) = 0
syscall (/usr/lib64/libc-2.25.so)
pkey_mprotect (/home/acme/c/pkey)
0.030 ( 0.002 ms): pkey/7818 pkey_free(pkey: -1 ) = -1 EINVAL Invalid argument
syscall (/usr/lib64/libc-2.25.so)
pkey_free (/home/acme/c/pkey)
The tools/include/uapi/asm-generic/mman-common.h file is used to find
the access rights defines for the pkey_alloc syscall second argument.
Since we have the detector of changes for the tools/include header files
versus its kernel origin (include/uapi/asm-generic/mman-common.h), we'll
get whatever new flag appears for that argument automatically.
This method should be used in other cases where it is easy to generate
those flags tables because the header has properly namespaced defines
like PKEY_DISABLE_ACCESS and PKEY_DISABLE_WRITE.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3xq5312qlks7wtfzv2sk3nct@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building with an external FEATURES_DUMP, bpf complains
that features dump file is not found. Fix it by passing full file path.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Paul Turner <pjt@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170827075442.108534-7-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Prior to this patch, make scripts tested for CLANG with ifeq ($(CC),
clang), failing to detect CLANG binaries with different names. Fix it by
testing for the existence of __clang__ macro in the list of compiler
defined macros.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Paul Turner <pjt@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170827075442.108534-5-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow user to define flex and bison binary names by passing FLEX and
BISON variables.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Paul Turner <pjt@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170827075442.108534-3-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no big value on displaying counts for every event ID, which is
one per every CPU. Rather than that, displaying the whole sum for the
event.
$ perf record -c 100000 -e cycles:u -s test
$ perf report -T
Before:
# PID TID cycles:u cycles:u cycles:u cycles:u ... [20 more columns of 'cycles:u']
3339 3339 0 0 0 0
3340 3340 0 0 0 0
3341 3341 0 0 0 0
3342 3342 0 0 0 0
Now:
# PID TID cycles:u
3339 3339 19678
3340 3340 18744
3341 3341 17335
3342 3342 26414
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170824162737.7813-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to make sure the array of value pointers are zero initialized,
because we use them in realloc later on and uninitialized non zero value
will cause allocation error and aborted execution.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170824162737.7813-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Bailing out in case the allocation failed, not the other way round.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170824162737.7813-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We are taking wrong index (+1) for first thread, which leaves thread
with index 0 unused and uninitialized.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170824162737.7813-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding dump_read function to gather all the dump output of read
function. Adding output of enabled and running times and id if enabled
(3 new lines with '...' prefix below).
$ perf record -s ...
$ perf report -D
958358311769 0x91f8 [0x40]: PERF_RECORD_READ: 3339 3339 cycles:u 0
... time enabled : 958358313731
... time running : 958358313731
... id : 80
Committer note:
Do not use 'read' as a variable name as it breaks the build on older
systems, such as RHEL6:
CC /tmp/build/perf/util/session.o
cc1: warnings being treated as errors
util/session.c: In function 'dump_read':
util/session.c:1132: error: declaration of 'read' shadows a global declaration
/usr/include/bits/unistd.h:35: error: shadowed declaration is here
mv: cannot stat `/tmp/build/perf/util/.session.o.tmp': No such file or directory
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170824162737.7813-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The value passed into the perf.data file for the CONFIGR register in ETMv4
was incorrectly being set to the command line options/ETMv3 value.
Adds bit definitions and function to remap this value to the correct ETMv4
CONFIGR bit values for all selected options.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set read_format for what we expect to get from read event generated by
perf_event_attr::inherit_stat.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170824162737.7813-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Skylake introduced new mem_remote bit in union perf_mem_data_src [1].
It applies to any other memory level to express Remote unknown level, as
is reported by Skylake.
Adding this extra check to c2c_decode_stats to properly decode remote
HITMs on Skylake.
[1] http://lkml.kernel.org/r/20170816222156.19953-4-andi@firstfloor.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170824085732.28481-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We can't pass --dynamic-list list into static build anymore, because
compilers starts to scream about that. Fedora 26 started to fail build
with following error:
$ make LDFLAGS=-static
...
/usr/bin/ld: dynamic STT_GNU_IFUNC symbol `strcmp' with pointer equality in `/usr/lib/gcc/x86_64-redhat-linux/7/../../../../lib64/libc.a(strcmp.o
+)' can not be used when making an executable; recompile with -fPIE and relink with -pie
There's no sense for --dynamic-list in static build, because there's no
.dynsym table in static binary. Consequently the traceevent plugins have
never worked with static build, but it was quietly passed by.
To fix this in future I think we should add support to compile plugins
within the perf binary directly for static build.
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-jeg6a7ff9j9hlqn8k4gllzvv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As defined in tools/perf/util/pmu.c, the EVENT_SOURCE_DEVICE_PATH is
/sys/bus/event_source/devices/ (no traling 's' in event_source)
This patch corrects the path in the perf stat documentation
Signed-off-by: Jack Henschel <jackdev@mailbox.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jack Henschel <jackdev@mailbox.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: trivial@kernel.org
Link: http://lkml.kernel.org/r/20170824132022.10934-1-jackdev@mailbox.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* libunwind-x86_64 must be linked before libunwind
* libunwind requires liblzma
* static libunwind conflicts with static libgcc_eh
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/150322917247.129799.14247751517961953155.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix feature test for static libdw: link required dependencies. Backends
of libebl are not statically linked thus libdl is required.
In Debian/Ubuntu libdw-dev includes libebl.a starting from 0.166-1.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/150322916720.129772.7959925864494283854.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix misprint CAP_IOC_LOCK -> CAP_IPC_LOCK. This capability have nothing
to do with raw tracepoints. This part is about bypassing mlock limits.
Sysctl kernel.perf_event_paranoid = -1 allows raw and ftrace function
tracepoints without CAP_SYS_ADMIN.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/150322916080.129746.11285255474738558340.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Target install-man builds them but forget to install.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: af3df2cf17 ("perf tools: Try to build Documentation when installing")
Link: http://lkml.kernel.org/r/150322915300.129715.13645857235229756834.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add some simple tests to perf test to test data source printing.
v2: Make the tests actually checked for the correct name of Forward
v3: Adjust to new encoding
Committer notes:
Avoid the in place declaration to make this build with older compilers,
for instance, in Debian 7 we get:
tests/mem.c: In function 'test__mem':
tests/mem.c:30:5: error: missing initializer [-Werror=missing-field-initializers]
tests/mem.c:30:5: error: (near initialization for '(anonymous).<anonymous>.mem_snoop') [-Werror=missing-field-initializers]
So just zero a struct, then go on building the unions as needed,
reusing settings from the previous test, i.e. local -> remote, etc.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170816222156.19953-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add decoding for the new "lvlx" and "snoopx" meminfo fields added
earlier to the kernel so that "perf mem report" and other tools can
print it properly.
v2: Merge with persistent memory patch.
Switch to new bit encoding for each combination.
v3: Switch to generic lvlnum field.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170816222156.19953-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add JSON uncore events for Skylake Server to perf.
Based on JSON list V1.01
This is a much fuller list than with earlier uncores, including
more low level (but also harder to understand) events. It does not
include the "experimential" events. The previous
high level metric (LLC_* etc.) are still available when applicable.
C state power events are not included at this point.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20170816220553.GA19463@tassilo.jf.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid adding redundant events while parsing an expression. When we add
an "other" event check first if it already exists.
v2: Fix perf test failure.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170811232634.30465-10-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some of the upcoming metrics need more than 8 events. Increase the maximum
number the parser supports.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170811232634.30465-9-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enhance the expression parser for more complex metric formulas.
- Support python style IF ELSE operators
- Add an #SMT_On magic variable for formulas that depend on the SMT
status.
Example: 4 *( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles
- Support MIN/MAX operations
Example: min(1 , IDQ.MITE_UOPS / ( UPI * 16 * ( ICACHE.HIT + ICACHE.MISSES ) / 4.0 ) )
This is useful to fix up problems caused by multiplexing.
- Support | & ^ operators
- Minor cleanups and fixes
- Support an \ escape for operators. This allows to specify event names
like c2-residency
- Support @ as an alternative for / to be able to specify pmus without
conflicts with operators (like msr/tsc/ as msr@tsc@)
Example: (cstate_core@c3\\-residency@ / msr@tsc@) * 100
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170811232634.30465-8-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an smt_on() function to return if SMT is enabled or disabled. Used
in the next patch.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170811232634.30465-7-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf stat -e cpu/uops_executed.core,cmask=1/
would be detected as a BPF source event because the .c matches the .c
source BPF pattern.
v2:
Originally I tried to use lex lookahead, but it doesn't seem to work.
This now extends the BPF pattern to match longer events, but then does
an extra check in the C code to reject BPF matches that do not end with
.c/.o/.obj
This uses REJECT, which makes the flex scanner slower, but that
shouldn't be a big problem for the perf events.
Committer testing:
# perf trace -e write -e /home/acme/bpf/tracepoint.c cat /etc/passwd > /dev/null
0.000 ( 0.006 ms): cat/18485 write(fd: 1, buf: 0x7f59eebe1000, count: 3494 ) ...
0.006 ( ): raw_syscalls:sys_enter:NR 1 (1, 7f59eebe1000, da6, 22, 7f59eebe0010, 0))
0.008 ( ): perf_bpf_probe:_write:(ffffffff9626b2c0))
0.000 ( 0.010 ms): cat/18485 ... [continued]: write()) = 3494
#
It continues doing what was expected, i.e. identifying
/home/acme/bpf/tracepoint.c as a BPF event and activates the clang
machinery to build an eBPF object and then uses sys_bpf() to hook it up
to the raw_syscalls:sys_enter tracepoint, etc.
Andi forgot to add Wang to the CC list, fix it.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170811232634.30465-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix buffer overflow for:
% perf stat -e msr/tsc/,cstate_core/c7-residency/ true
that causes glibc free list corruption. For some reason it doesn't
trigger in valgrind, but it is visible in AS:
=================================================================
==32681==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x603000003f5c at pc 0x0000005671ef bp 0x7ffdaaac9ac0 sp 0x7ffdaaac9ab0
READ of size 4 at 0x603000003f5c thread T0
#0 0x5671ee in perf_evsel__close_fd util/evsel.c:1196
#1 0x56c57a in perf_evsel__close util/evsel.c:1717
#2 0x55ed5f in perf_evlist__close util/evlist.c:1631
#3 0x4647e1 in __run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:749
#4 0x4648e3 in run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:767
#5 0x46e1bc in cmd_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:2785
#6 0x52f83d in run_builtin /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:296
#7 0x52fd49 in handle_internal_command /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:348
#8 0x5300de in run_argv /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:392
#9 0x5308f3 in main /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:530
#10 0x7f0672d13400 in __libc_start_main (/lib64/libc.so.6+0x20400)
#11 0x428419 in _start (/home/ak/hle/obj-perf/perf+0x428419)
0x603000003f5c is located 0 bytes to the right of 28-byte region [0x603000003f40,0x603000003f5c)
allocated by thread T0 here:
#0 0x7f0675139020 in calloc (/lib64/libasan.so.3+0xc7020)
#1 0x648a2d in zalloc util/util.h:23
#2 0x648a88 in xyarray__new util/xyarray.c:9
#3 0x566419 in perf_evsel__alloc_fd util/evsel.c:1039
#4 0x56b427 in perf_evsel__open util/evsel.c:1529
#5 0x56c620 in perf_evsel__open_per_thread util/evsel.c:1730
#6 0x461dea in create_perf_stat_counter /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:263
#7 0x4637d7 in __run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:600
#8 0x4648e3 in run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:767
#9 0x46e1bc in cmd_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:2785
#10 0x52f83d in run_builtin /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:296
#11 0x52fd49 in handle_internal_command /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:348
#12 0x5300de in run_argv /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:392
#13 0x5308f3 in main /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:530
#14 0x7f0672d13400 in __libc_start_main (/lib64/libc.so.6+0x20400)
The event is allocated with cpus == 1, but freed with cpus == real number
When the evsel close function walks the file descriptors it exceeds the
fd xyarray boundaries and reads random memory.
v2:
Now that xyarrays save their original dimensions we can use these to
iterate the two dimensional fd arrays. Fix some users (close, ioctl) in
evsel.c to use these fields directly. This allows simplifying the code
and dropping quite a few function arguments. Adjust all callers by
removing the unneeded arguments.
The actual perf event reading still uses the original values from the
evsel list.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170811232634.30465-2-andi@firstfloor.org
[ Fix up xy_max_[xy]() -> xyarray__max_[xy]() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Save the original array dimensions in xyarrays, so that users can
retrieve them later. Add some inline functions to access these fields.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170811232634.30465-1-andi@firstfloor.org
[ As noticed by Jiri, fix up namespacing: xy__method() -> xyarray__method() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using the existing 't' hotkey, support the three views: percent, total
period and number of samples on the annotate TUI browser, circulating
them like below:
Percent -> Total Period -> Nr Samples -> Percent ...
Committer notes:
Removed new 'e' hotkey, should be resubmitted as a separate patch, with
proper justification for its inclusion.
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/r/1503046028-5691-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support the --show-nr-samples in the TUI browser.
Committer notes:
Lift the restriction about --tui but leave it for --gtk:
$ export LD_LIBRARY_PATH=~/lib64
$ perf annotate --gtk --show-nr-samples --show-nr-samples is not available in --gtk mode at this time
$
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1503046023-5646-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the --show-total-period option was introduced we forgot to add an
entry in the man page, fix it.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Martin Liška <mliska@suse.cz>
Fixes: 0c4a5bcea4 ("perf annotate: Display total number of samples with --show-total-period")
Link: http://lkml.kernel.org/r/1503046013-5555-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --show-nr-samples option to "perf annotate" so that it matches "perf
report".
Committer note:
Note that it can't be used together with --show-total-period, which
seems like a silly limitation, that can be lifted at some point.
Made it bail out if not on --stdio.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1503046008-5511-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Several architectures don't need to define it since the string is the
same as the default one, so nuke them.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-v1e1jr1u474w9xcelpaoxamu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since 1955643902 ("perf_counter: kerneltop: simplify data_head read")
we do not use it, and this was way back in 2009, remove it before some
other arch maintainer adds its implementation, like so many did,
needlessly :-)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3l2su9c58eaq4twjzrf9uu08@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Calling them just "data" is too vague, call it 'perf_state', to make it
clearer, for instance, when looking at patch hunks.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-rnhk5yb05wem77rjpclrh7so@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi reported problems when parse errors were detected with vendor
events (json), because in the yyparse/parse_events_parse function we
dereferenced the _data parameter to two different structs, with
different layouts, which ended up making parse_events_evlist->error to
point to random stack addresses.
Fix it by making _data to always be struct parse_events_state, changing
the only place where 'struct parse_events_term' was used in
parse_events.y.
Reported-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-bc27lshz823hxl8n9nkelcgh@git.kernel.org
Fixes: 90e2b22dee ("perf/tool: Add support to reuse event grammar to parse out terms")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename it from 'parse_events_evlist' to 'parse_events_state' to better
state that this is parsing state that has to be passed around.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dursqtg2h2w98ztaa297u43x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those are just casting a void pointer to a struct to then pass them to
functions, i.e. remove the local variables and pass the void pointer
directly, the casting will be done and the code will be shorter.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-bzfodzr3mb46gy7u7v0mqad6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to consider the null terminator, oops, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 017037ff3d ("perf trace: Allow specifying list of syscalls and events in -e/--expr/--event")
Link: http://lkml.kernel.org/n/tip-j79jpqqe91gvxqmsgxgfn2ni@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Skylake server uncore IIO events need new FCMask/PortMask fields. Support
those in the json parser and pass it through as a filter.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170816220201.19182-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we do not specify bash (and/or zsh) as a requirement, use the
standard error redirection that is more widely supported.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Link: http://lkml.kernel.org/n/tip-ji5mhn3iilgch3eaay6csr6z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf's BPF prologue generator unconditionally fetches 8 bytes for
function parameters, which causes problems on big endian machines. Thomas
gives a detailed analysis for this problem:
http://lkml.kernel.org/r/968ebda5-abe4-8830-8d69-49f62529d151@linux.vnet.ibm.com
---- 8< ----
I investigated perf test BPF for s390x and have a question regarding
the 38.3 subtest (bpf-prologue test) which fails on s390x.
When I turn on trace_printk in tests/bpf-script-test-prologue.c
I see this output in /sys/kernel/debug/tracing/trace:
[root@s8360047 perf]# cat /sys/kernel/debug/tracing/trace
perf-30229 [000] d..2 170161.535791: : f_mode 2001d00000000 offset:0 orig:0
perf-30229 [000] d..2 170161.535809: : f_mode 6001f00000000 offset:0 orig:0
perf-30229 [000] d..2 170161.535815: : f_mode 6001f00000000 offset:1 orig:0
perf-30229 [000] d..2 170161.535819: : f_mode 2001d00000000 offset:1 orig:0
perf-30229 [000] d..2 170161.535822: : f_mode 2001d00000000 offset:2 orig:1
perf-30229 [000] d..2 170161.535825: : f_mode 6001f00000000 offset:2 orig:1
perf-30229 [000] d..2 170161.535828: : f_mode 6001f00000000 offset:3 orig:1
perf-30229 [000] d..2 170161.535832: : f_mode 2001d00000000 offset:3 orig:1
perf-30229 [000] d..2 170161.535835: : f_mode 2001d00000000 offset:4 orig:0
perf-30229 [000] d..2 170161.535841: : f_mode 6001f00000000 offset:4 orig:0
[...]
There are 3 parameters the eBPF program tests/bpf-script-test-prologue.c
accesses: f_mode (member of struct file at offset 140) offset and orig. They
are parameters of the lseek() system call triggered in this test case in
function llseek_loop().
What is really strange is the value of f_mode. It is an 8 byte value, whereas
in the probe event it is defined as a 4 byte value. The lower 4 bytes are all
zero and do not belong to member f_mode. The correct value should be 2001d for
read-only and 6001f for read-write open mode.
Here is the output of the 'perf test -vv bpf' trace:
Try to find probe point from debuginfo.
Matched function: null_lseek [2d9310d]
Probe point found: null_lseek+0
Searching 'file' variable in context.
Converting variable file into trace event.
converting f_mode in file
f_mode type is unsigned int.
Opening /sys/kernel/debug/tracing//README write=0
Searching 'offset' variable in context.
Converting variable offset into trace event.
offset type is long long int.
Searching 'orig' variable in context.
Converting variable orig into trace event.
orig type is int.
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing//kprobe_events write=1
Writing event: p:perf_bpf_probe/func _text+8794224 f_mode=+140(%r2):x32
---- 8< ----
This patch parses the type of each argument and converts data from memory to
expected type.
Now the test runs successfully on 4.13.0-rc5:
[root@s8360046 perf]# ./perf test bpf
38: BPF filter :
38.1: Basic BPF filtering : Ok
38.2: BPF pinning : Ok
38.3: BPF prologue generation : Ok
38.4: BPF relocation checker : Ok
[root@s8360046 perf]#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170815092159.31912-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for SQLite 3 to the call-graph-from-sql.py script. The SQL
statements work as is, so just detect the database type by checking if the
SQLite 3 file exists.
Committer notes:
Tested collecting the PT data on a RHEL7.4, generating the SQLite3
database there and then moving it to a Fedora 26 system where the
call-graph-from-sql.py script was run, using python-pyside version
1.2.2-7fc26 to see the callgraphs using Qt4.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/1501749090-20357-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for exporting to SQLite 3 the same data as the PostgreSQL
export.
Committer note:
Tested on RHEL 7.4 using the 1.2.2-4el python-pyside packages from EPEL.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/1501749090-20357-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The export does not work if only branches are exported because of a
missing column in the samples table. Fix by adding the missing
call_path_id.
Fixes: 3521f3bc9d ("perf script: Update export-to-postgresql to support callchain export")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/1501749090-20357-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If that is the case, or if the required lib is not present, e.g.
elfutils-devel in Fedora systems, then just skip the tests requiring
DWARF analysis.
Before:
# rpm -e elfutils-devel
# perf test ping vfs_getname
60: Use vfs_getname probe to get syscall args filenames : FAILED!
61: probe libc's inet_pton & backtrace it with ping : Ok
62: Check open filename arg using perf trace + vfs_getname: FAILED!
63: Add vfs_getname probe to get syscall args filenames : FAILED!
#
After:
# perf test vfs_getname
60: Use vfs_getname probe to get syscall args filenames : Skip
62: Check open filename arg using perf trace + vfs_getname: Skip
63: Add vfs_getname probe to get syscall args filenames : Skip
#
Then, reinstalling elfutils-devel, rebuilding the tool and running
again:
# perf test vfs_getname
60: Use vfs_getname probe to get syscall args filenames : Ok
62: Check open filename arg using perf trace + vfs_getname: Ok
63: Add vfs_getname probe to get syscall args filenames : Ok
#
Reported-by: Kim Phillips <kim.phillips@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d67tvn401fxrwr97pu5ihfb1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a library function that checks if 'perf probe' is built into the
tool being tested, skipping tests that need it.
Testing it on a system after removing the library needed to build
'probe' as a perf subcommand:
# perf test ping vfs_getname
59: Use vfs_getname probe to get syscall args filenames : Skip
60: probe libc's inet_pton & backtrace it with ping : Skip
61: Check open filename arg using perf trace + vfs_getname: Skip
62: Add vfs_getname probe to get syscall args filenames : Skip
# perf probe
perf: 'probe' is not a perf-command. See 'perf --help'.
#
Now reinstalling elfutils-libelf-devel on this Fedora 26 system to
rebuild perf and then retest this:
# perf test ping vfs_getname
60: Use vfs_getname probe to get syscall args filenames : Ok
61: probe libc's inet_pton & backtrace it with ping : Ok
62: Check open filename arg using perf trace + vfs_getname: Ok
63: Add vfs_getname probe to get syscall args filenames : Ok
#
Reported-by: Kim Phillips <kim.phillips@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ctdck2gzsskqhjzu3ebb62zm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3zxjswdbs2au3ih0rino0iy1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Installs a probe on libc's inet_pton function, that will use uprobes,
then use 'perf trace' on a ping to localhost asking for just one packet
with the a backtrace 3 levels deep, check that it is what we expect.
This needs no debuginfo package, all is done using the libc ELF symtab
and the CFI info in the binaries.
Testing it:
# perf test ping
61: probe libc's inet_pton & backtrace it with ping : Ok
In verbose mode:
# perf test -v ping
61: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 1007
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.058 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.058/0.058/0.058/0.000 ms
0.000 probe_libc:inet_pton:(7f75fce12a20))
__GI___inet_pton (/usr/lib64/libc-2.24.so)
getaddrinfo (/usr/lib64/libc-2.24.so)
_init (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-idrntt4nbg15aafu8hjmv7sk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf report' tool does not display the addresses of kernel module
symbols correctly.
For example symbol qeth_send_ipa_cmd in kernel module qeth.ko has this
relative address for function qeth_send_ipa_cmd():
[root@s8360047 linux]# nm -g drivers/s390/net/qeth.ko | fgrep send_ipa_cmd
0000000000013088 T qeth_send_ipa_cmd
The module is loaded at address:
[root@s8360047 linux]# cat /sys/module/qeth/sections/.text
0x000003ff80296d20
[root@s8360047 linux]#
This should result in a start address of:
0x13088 + 0x3ff80296d20 = 0x3ff802a9da8
Using crash to verify the address on a live system:
[root@s8360046 linux]# crash vmlinux
crash 7.1.9++
Copyright (C) 2002-2016 Red Hat, Inc.
Copyright (C) 2004, 2005, 2006, 2010 IBM Corporation
[...]
crash> mod -s qeth drivers/s390/net/qeth.ko
MODULE NAME SIZE OBJECT FILE
3ff8028d700 qeth 151552 drivers/s390/net/qeth.ko
crash> sym qeth_send_ipa_cmd
3ff802a9da8 (T) qeth_send_ipa_cmd [qeth] /root/linux/drivers/s390/net/qeth_core_main.c: 2944
crash>
Now perf report displays the address of symbol qeth_send_ipa_cmd:
symbol__new:
qeth_send_ipa_cmd 0x130f0-0x132ce
There is a difference of 0x68 between the entry in the symbol table (see
nm command above) and perf. The difference is from the offset the .text
segment of qeth.ko:
[root@s8360047 perf]# readelf -a drivers/s390/net/qeth.ko
Section Headers:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
[ 0] NULL 0000000000000000 00000000
0000000000000000 0000000000000000 0 0 0
[ 1] .note.gnu.build-i NOTE 0000000000000000 00000040
0000000000000024 0000000000000000 A 0 0 4
[ 2] .text PROGBITS 0000000000000000 00000068
000000000001c8a0 0000000000000000 AX 0 0 8
As seen the .text segment has an offset of 0x68 with start address 0x0.
Therefore 0x68 is added to the address of qeth_send_ipa_cmd and thus
0x13088 + 0x68 = 0x130f0 is displayed.
This is wrong, perf report needs to display the start address of symbol
qeth_send_ipa_cmd at 0x13088 + qeth.ko.text section start address.
The qeth.ko module .text start address is available in the qeth.ko DSO
map. Just identify the kernel module symbols and correct the addresses.
With the fix I see this correct address for symbol: symbol__new:
qeth_send_ipa_cmd 0x3ff802a9da8-0x3ff802a9f86
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com>
LPU-Reference: 20170803134902.47207-1-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-q8lktlpoxb5e3dj52u1s1rw4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
During work on perf report for s390 I ran into the following issue:
0 0x318 [0x78]: PERF_RECORD_MMAP -1/0:
[0x3ff804d6990(0xfffffc007fb2966f) @ 0]:
x /lib/modules/4.12.0perf1+/kernel/drivers/s390/net/qeth_l2.ko
This is a PERF_RECORD_MMAP entry of the perf.data file with an invalid
module size for qeth_l2.ko (the s390 ethernet device driver).
Even a mainframe does not have 0xfffffc007fb2966f bytes of main memory.
It turned out that this wrong size is created by the perf record
command. What happens is this function call sequence from
__cmd_record():
perf_session__new():
perf_session__create_kernel_maps():
machine__create_kernel_maps():
machine__create_modules(): Creates map for all loaded kernel modules.
modules__parse(): Reads /proc/modules and extracts module name and
load address (1st and last column)
machine__create_module(): Called for every module found in /proc/modules.
Creates a new map for every module found and enters
module name and start address into the map. Since the
module end address is unknown it is set to zero.
This ends up with a kernel module map list sorted by module start
addresses. All module end addresses are zero.
Last machine__create_kernel_maps() calls function map_groups__fixup_end().
This function iterates through the maps and assigns each map entry's
end address the successor map entry start address. The last entry of the
map group has no successor, so ~0 is used as end to consume the remaining
memory.
Later __cmd_record calls function record__synthesize() which in turn calls
perf_event__synthesize_kernel_mmap() and perf_event__synthesize_modules()
to create PERF_REPORT_MMAP entries into the perf.data file.
On s390 this results in the last module qeth_l2.ko
(which has highest start address, see module table:
[root@s8360047 perf]# cat /proc/modules
qeth_l2 86016 1 - Live 0x000003ff804d6000
qeth 266240 1 qeth_l2, Live 0x000003ff80296000
ccwgroup 24576 1 qeth, Live 0x000003ff80218000
vmur 36864 0 - Live 0x000003ff80182000
qdio 143360 2 qeth_l2,qeth, Live 0x000003ff80002000
[root@s8360047 perf]# )
to be the last entry and its map has an end address of ~0.
When the PERF_RECORD_MMAP entry is created for kernel module qeth_l2.ko
its start address and length is written. The length is calculated in line:
event->mmap.len = pos->end - pos->start;
and results in 0xffffffffffffffff - 0x3ff804d6990(*) = 0xfffffc007fb2966f
(*) On s390 the module start address is actually determined by a __weak function
named arch__fix_module_text_start() in machine__create_module().
I think this improvable. We can use the module size (2nd column of /proc/modules)
to get each loaded kernel module size and calculate its end address.
Only for map entries which do not have a valid end address (end is still zero)
we can use the heuristic we have now, that is use successor start address or ~0.
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com>
LPU-Reference: 20170803134902.47207-2-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-nmoqij5b5vxx7rq2ckwu8iaj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes we get a non-null, but empty, string for the filename from
bfd. This then results in srclines of the form ":0", which is different
from the canonical SRCLINE_UNKNOWN in the form "??:0". Set the file to
NULL if it is empty to fix this.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170806212446.24925-14-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The input string is not modified and thus can be passed in as a pointer
to const data.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170806212446.24925-3-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Uses the 'perf test shell' library to add probe:vfs_getname to the
system then use it with 'perf trace' using 'touch' to write to a temp
file, then checks that that was captured by the vfs_getname was used by
'perf trace', that already handles "probe:vfs_getname" if present, and
used in the "open" syscall "filename" argument beautifier.
Testing it:
# perf test "trace + vfs_getname"
61: Check open filename arg using perf trace + vfs_getname: Ok
#
# perf test -v "trace + vfs_getname"
61: Check open filename arg using perf trace + vfs_getname:
--- start ---
test child forked, pid 30846
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
2.237 ( 0.012 ms): touch/30855 open(filename: /tmp/temporary_file.kmoWQ, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
test child finished with 0
---- end ----
Check open filename arg using perf trace + vfs_getname: Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-j02nobfvvn9c7yrphdsnbqx0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This test uses the 'perf test shell' library to add probe:vfs_getname to the
system then use it with 'perf record' using 'touch' to write to a temp file,
then checks that that was captured by the vfs_getname probe in the generated
perf.data file, with the temp file name as the pathname argument.
Using it:
# perf test "Use vfs_getname"
60: Use vfs_getname probe to get syscall args filenames: Ok
# perf test -v "Use vfs_getname"
60: Use vfs_getname probe to get syscall args filenames:
--- start ---
test child forked, pid 16414
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
Recording open file:
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.022 MB /tmp/vaca.perf.data.QZsn7 (13 samples) ]
Looking at perf.data file for vfs_getname records for the file we touched:
touch 16421 [002] 1255152.879561: probe:vfs_getname: (ffffffffa626e608) pathname="/tmp/vaca.l10SL"
test child finished with 0
---- end ----
Use vfs_getname probe to get syscall args filenames: Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-t555fnhbcbxnukltk23dqxur@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Multiple tests will be able to reuse these functions, to test things
like perf report, 'trace', etc, using this probe.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-48xagvozhouhyi8fjota6o2d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we have shell tests, install them.
Developers don't need this pass, as 'perf test' will look first at the
in tree scripts at tools/perf/tests/shell/.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-j21u4v0jsehi0lpwqwjb4j45@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
First perf shell test:
# perf test vfs_getname
60: Add vfs_getname probe to get syscall args filenames: Ok
#
In verbose mode:
# perf test -v vfs_getname
60: Add vfs_getname probe to get syscall args filenames:
--- start ---
test child forked, pid 19146
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
test child finished with 0
---- end ----
Add vfs_getname probe to get syscall args filenames: Ok
#
And if the vmlinux file is not found:
# mv ../build/v4.12.0-rc6+/vmlinux ../build/v4.12.0-rc6+/vmlinux.hidden
# perf test vfs_getname
60: Add vfs_getname probe to get syscall args filenames: Skip
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-8f3n22c1yn516ev30s603ow2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before:
# perf test Synth
39: Synthesize thread map : Ok
41: Synthesize cpu map : Ok
42: Synthesize stat config : Ok
43: Synthesize stat : Ok
44: Synthesize stat round : Ok
45: Synthesize attr update : Ok
# perf test list Synth
#
After:
# perf test Synth
39: Synthesize thread map : Ok
41: Synthesize cpu map : Ok
42: Synthesize stat config : Ok
43: Synthesize stat : Ok
44: Synthesize stat round : Ok
45: Synthesize attr update : Ok
# perf test list Synth
39: Synthesize thread map
41: Synthesize cpu map
42: Synthesize stat config
43: Synthesize stat
44: Synthesize stat round
45: Synthesize attr update
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-v95tqqzuwawsmds3zn2mosje@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow testing by directly using perf tools in scripts, checking that
the effects on the system are the ones expected and that the output
produced is as well the desired one.
For instance, adding a probe at a well known location with 'perf probe',
then checking that the results from using that probe to record are the
desired ones, etc.
The next csets will introduce tests using this new testing
infrastructure.
The scripts should return 0 for Ok, 1 for FAIL and 2 for SKIP.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-swbpn7amrjqffh83lsr39s9p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This way we'll be able to pass more test specific parameters without
having to change this function signature.
Will be used by the upcoming 'shell tests', shell scripts that will
call perf tools and check if they work as expected, comparing its
effects on the system (think 'perf probe foo') the output produced, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wq250w7j1opbzyiynozuajbl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before:
# perf test Synth
39: Synthesize thread map : Ok
41: Synthesize cpu map : Ok
42: Synthesize stat config : Ok
43: Synthesize stat : Ok
44: Synthesize stat round : Ok
45: Synthesize attr update : Ok
#
# perf test list Synth
1: Synthesize thread map
2: Synthesize cpu map
3: Synthesize stat config
4: Synthesize stat
5: Synthesize stat round
6: Synthesize attr update
#
After:
# perf test Synth
39: Synthesize thread map : Ok
41: Synthesize cpu map : Ok
42: Synthesize stat config : Ok
43: Synthesize stat : Ok
44: Synthesize stat round : Ok
45: Synthesize attr update : Ok
#
# perf test list Synth
39: Synthesize thread map
41: Synthesize cpu map
42: Synthesize stat config
43: Synthesize stat
44: Synthesize stat round
45: Synthesize attr update
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-pjhuhkphs7o3tkbqrukfv6bz@git.kernel.org
Fixes: e8210cefb7 ("perf tests: Introduce iterator function for tests")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The stat shadow saved values rbtree is indexed by a pointer. Fix the
comparison function:
- We cannot return a pointer delta as an int because that loses bits on
64bit.
- Doing pointer arithmetic on the struct pointer only works if the
objects are spaced by the multiple of the object size, which is not
guaranteed for individual malloc'ed object
Replace it with a proper comparison.
This fixes various problems with values not being found.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170724234015.5165-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Drop the .json suffix for events directory in the mapfile.csv.
Now that we have separate JSON files for each topic in a CPU (eg: see
tools/perf/pmu-events/arch/powerpc/power8/*.json) the .json suffix in
the mapfile is misleading and redundant.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20170802174617.GA32545@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will use it to generate tables for beautifying ioctl's 'cmd' arg.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-nxwpq34hu6te1m2ra5m7o8n9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not all subsystems use the fact that we may have the same _IOC_NR for
different _IOC_DIR, as in the end it'll result in a different ioctl
number.
So, for instance, vhost virtio has:
#define VHOST_GET_FEATURES _IOR(VHOST_VIRTIO, 0x00, __u64)
#define VHOST_SET_FEATURES _IOW(VHOST_VIRTIO, 0x00, __u64)
So same _IOC_NR (0x00) but different _IOC_DIR (R versus W), but it also
have:
#define VHOST_SET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x13, struct vhost_vring_state)
#define VHOST_GET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x14, struct vhost_vring_state)
A "get" operation that uses a "W" _IOC_DIR, and its implementation, uses
copy_to_user, it should've probably been _IOR().
Then:
/* Base value where queue looks for available descriptors */
#define VHOST_SET_VRING_BASE _IOW(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
/* Get accessor: reads index, writes value in num */
#define VHOST_GET_VRING_BASE _IOWR(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
So we'll need to use _IOC_DIR() to disambiguate the VHOST_VIRTIO ioctl
bautifier.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-rq6q717ql7j2z7kuccafgq84@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will use it to generate tables for beautifying ioctl's 'cmd' arg.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-nxwpq34hu6te1m2ra5m7o8n9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This time we try a new approach, using a copy of uapi/sound/asound.h we
auto generate the string tables, then include it in the ioctl cmd
beautifier.
This way either the sound developers will add the new commands to the
tools/ copy, like is happening with other areas of tools/include/ (bpf.h
comes to mind), or we'll be notified when building perf that our copy
drifted.
E.g.:
# perf trace -p 22084 -e ioctl 2>&1 | head -5
0.000 ( 0.068 ms): alsa-sink-ALC3/22084 ioctl(fd: 49</dev/snd/pcmC1D0p>, cmd: SNDRV_PCM_HWSYNC, arg: 0x557f8d7fa0f0) = 0
0.344 ( 0.041 ms): alsa-sink-ALC3/22084 ioctl(fd: 46</dev/snd/controlC1>, cmd: SNDRV_CTL_ELEM_READ, arg: 0x7fe764018ee0) = 0
0.403 ( 0.011 ms): alsa-sink-ALC3/22084 ioctl(fd: 49</dev/snd/pcmC1D0p>, cmd: SNDRV_PCM_HWSYNC, arg: 0x557f8d7fa0f0) = 0
0.427 ( 0.009 ms): alsa-sink-ALC3/22084 ioctl(fd: 49</dev/snd/pcmC1D0p>, cmd: SNDRV_PCM_STATUS_EXT, arg: 0x7fe76c2e0b30) = 0
2.461 ( 0.042 ms): alsa-sink-ALC3/22084 ioctl(fd: 49</dev/snd/pcmC1D0p>, cmd: SNDRV_PCM_HWSYNC, arg: 0x557f8d7fa0f0) = 0
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-8zuyf3e3u6jjcb2xzerw0kdi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will use it to generate tables for beautifying ioctl's 'cmd' arg.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wit4wwmrh9d37dtgtk0glbbj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will use it to generate tables for beautifying ioctl's 'cmd' arg.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-bqoq114h917u6ggazn8m1w0t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By using the _IOC_(DIR,NR,TYPE,SIZE) macros to lookup a 'type' keyed
table that then gets indexed by 'nr', falling back to a notation similar
to the one used by 'strace', only more compact, i.e.:
474.356 ( 0.007 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: (READ|WRITE, 0x64, 0xae, 0x1c), arg: 0x7ffc934f7880) = 0
474.369 ( 0.053 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: (READ|WRITE, 0x64, 0xb0, 0x18), arg: 0x7ffc934f77d0) = 0
505.055 ( 0.014 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: (READ|WRITE, 0x64, 0xaf, 0x4), arg: 0x7ffc934f741c) = 0
This also moves it out of builtin-trace.c and into trace/beauty/ioctl.c
to better compartimentalize all these formatters.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-s3enursdxsvnhdomh6qlte4g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We copy headers from include/, arch/ to allow tools/ use defines,
structs from newer kernels and still be able to build on older systems.
We then, as part of a build, check if those copies got out of sync, when
we emit a warning, so that we can check if something needs to be
reflected on the tools, e.g. a 'perf trace' syscall argument beautifier
needs tweaking.
But we don't have to be super strict with that, for instance, extra
spaces, tabs or blank lines aren't problematic, so change
check-headers.sh to have "--ignore-blank-lines --ignore-space-change" as
default "diff" arguments.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d8emqpdc3m2qtzt1ei8ra2tf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can build on older systems where otherwise we would end up
with:
CC /tmp/build/perf/trace/beauty/ioctl.o
trace/beauty/ioctl.c: In function 'ioctl__scnprintf_tty_cmd':
trace/beauty/ioctl.c:25:17: error: 'TIOCGEXCL' undeclared (first use in this function)
trace/beauty/ioctl.c:25:17: note: each undeclared identifier is reported only once for each function it appears in
trace/beauty/ioctl.c:25:2: error: array index in initializer not of integer type
trace/beauty/ioctl.c:25:2: error: (near initialization for 'ioctl_tty_cmd')
This way we can build a tool on an older system and it will still be
capable of processing perf.data files generated on newer systems.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-8qvkv6txwuzua6d0yvt65wl3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In this patch we changed the header checks:
perf build: Clarify header version warning message
Unfortunately the header checks were copied to various places and thus the message got
out of sync. Fix some of them here.
Note that there's still old, misleading messages remaining in:
tools/objtool/Makefile: || echo "warning: objtool: x86 instruction decoder differs from kernel" >&2 )) || true
tools/objtool/Makefile: || echo "warning: objtool: orc_types.h differs from kernel" >&2 )) || true
here objtool copied the perf message, plus:
tools/perf/util/intel-pt-decoder/Build: || echo "Warning: Intel PT: x86 instruction decoder differs from kernel" >&2 )) || true
here the PT code regressed over the original message and only emits a vague warning
instead of specific file names...
All of this should be consolidated into tools/Build/ and used in a consistent
manner.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Geneviève Bastien <gbastien@versatic.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Julien Desfossez <jdesfossez@efficios.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170730095130.bblldwxjz5hamybb@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Change this:
Warning: arch/x86/include/asm/disabled-features.h differs from kernel
Warning: arch/x86/include/asm/cpufeatures.h differs from kernel
Warning: arch/powerpc/include/uapi/asm/kvm.h differs from kernel
Warning: arch/s390/include/uapi/asm/kvm.h differs from kernel
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/kvm.h' differs from latest version at 'arch/powerpc/include/uapi/asm/kvm.h'
Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/kvm.h' differs from latest version at 'arch/s390/include/uapi/asm/kvm.h'
... to make it clearer what the warning is about, and to make it easier
to diff the two versions when syncing up the files.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Geneviève Bastien <gbastien@versatic.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Julien Desfossez <jdesfossez@efficios.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170730093747.qogjn3lp7ntwcgwg@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New features:
- Add PERF_SAMPLE_CALLCHAIN and PERF_RECORD_MMAP[2] to 'perf data' CTF
conversion, allowing CTF trace visualization tools to show callchains
and to resolve symbols (Geneviève Bastien)
Improvements:
- Use group read for event groups in 'perf stat', reducing overhead when
groups are defined in the event specification, i.e. when using {} to
enclose a list of events, asking them to be read at the same time,
e.g.: "perf stat -e '{cycles,instructions}'" (Jiri Olsa)
Fixes:
- Do not overwrite perf_sample->weight in 'perf annotate' when
processing samples, use whatever came from the kernel when
perf_event_attr.sample_type has PERF_SAMPLE_WEIGHT set or just handle
its default value, 0, when that is not set and "weight" is one of the
sort orders chosen (Arnaldo Carvalho de Melo)
- 'perf annotate --show-total-period' fixes:
- TUI should show period, not nr_samples
- Set appropriate column width for period/percent
- Fix the column header to show "Period" when when that is what
is being asked for
(Taeung Song, Arnaldo Carvalho de Melo)
- Use default sort if evlist is empty, fixing pipe mode (David Carrillo-Cisneros)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=sXpq
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.14-20170728' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes for 4.14 from Arnaldo Carvalho de Melo:
New features:
- Add PERF_SAMPLE_CALLCHAIN and PERF_RECORD_MMAP[2] to 'perf data' CTF
conversion, allowing CTF trace visualization tools to show callchains
and to resolve symbols (Geneviève Bastien)
Improvements:
- Use group read for event groups in 'perf stat', reducing overhead when
groups are defined in the event specification, i.e. when using {} to
enclose a list of events, asking them to be read at the same time,
e.g.: "perf stat -e '{cycles,instructions}'" (Jiri Olsa)
Fixes:
- Do not overwrite perf_sample->weight in 'perf annotate' when
processing samples, use whatever came from the kernel when
perf_event_attr.sample_type has PERF_SAMPLE_WEIGHT set or just handle
its default value, 0, when that is not set and "weight" is one of the
sort orders chosen (Arnaldo Carvalho de Melo)
- 'perf annotate --show-total-period' fixes:
- TUI should show period, not nr_samples
- Set appropriate column width for period/percent
- Fix the column header to show "Period" when when that is what
is being asked for
(Taeung Song, Arnaldo Carvalho de Melo)
- Use default sort if evlist is empty, fixing pipe mode (David Carrillo-Cisneros)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This adds documentation on the environment variables needed to the
message telling that no conversion support is compiled in.
Committer testing:
$ make -C tools/perf install
$ perf data convert --all --to-ctf myctftrace
No conversion support compiled in. perf should be compiled with environment variables LIBBABELTRACE=1 and LIBBABELTRACE_DIR=/path/to/libbabeltrace/
$
Signed-off-by: Geneviève Bastien <gbastien@versatic.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Julien Desfossez <jdesfossez@efficios.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170727181205.24843-3-gbastien@versatic.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds the mmap and mmap2 events to the CTF trace obtained from perf
data.
These events will allow CTF trace visualization tools like Trace Compass
to automatically resolve the symbols of the callchain to the
corresponding function or origin library.
To include those events, one needs to convert with the --all option.
Here follows an output of babeltrace:
$ sudo perf data convert --all --to-ctf myctftrace
$ babeltrace ./myctftrace
[19:00:00.000000000] (+0.000000000) perf_mmap2: { cpu_id = 0 },
{ pid = 638, tid = 638, start = 0x7F54AE39E000, filename =
"/usr/lib/ld-2.25.so" }
[19:00:00.000000000] (+0.000000000) perf_mmap2: { cpu_id = 0 }, { pid =
638, tid = 638, start = 0x7F54AE565000, filename =
"/usr/lib/libudev.so.1.6.6" }
[19:00:00.000000000] (+0.000000000) perf_mmap2: { cpu_id = 0 }, { pid =
638, tid = 638, start = 0x7FFC093EA000, filename = "[vdso]" }
Signed-off-by: Geneviève Bastien <gbastien@versatic.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Julien Desfossez <jdesfossez@efficios.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170727181205.24843-2-gbastien@versatic.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Either when we start 'perf annotate' or 'perf report' with
--show-total-period or when we, in the annotate browser, press 't' to
toggle period/percent for the first column, we need to adjust the width
for the 'period' case.
Based-on-a-patch-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-n2np5qcs20u6qjdr9orygne6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have the 't' hotkey to toggle showing either the total period or the
percentage of samples for a given line, but we forgot to toggle as well
the column header, always showing "Percent", even when showing the
period, fix it.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1501172169-6761-1-git-send-email-treeze.taeung@gmail.com
[ Extracted from a larger patch, s/Event count/Period/g ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In commit f8f4aaead5 ("perf annotate: Finally display IPC and cycle
accounting") the 'pcnt_width' variable was abused in a few places to
also include the optional width of the "IPC" and "cycles" columns, while
in other places we stopped using 'pcnt_width' and instead its previous
equation...
Now that we need to tap into annotate_browser__pcnt_width() to consider
if --show-total-period is being used and instead of that hardcoded 7
(strlen("Percent")) we need to use it or strlen("Event count") we need
this properly clarified to avoid having to touch all the (7 * nr_events)
places.
Clarify this by introducing a separate annotate_browser__cycles_width()
to leave the pcnt_width calculate just what its name implies.
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-szgb07t4k5wtvks8nzwkg710@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were showing the number of samples, not the total period, fix it.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: 0c4a5bcea4 ("perf annotate: Display total number of samples with --show-total-period")
Link: http://lkml.kernel.org/r/1500500223-16753-1-git-send-email-treeze.taeung@gmail.com
[ extracted from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just paving the way to fix --show-total-period in the TUI, i.e. now
we save in struct disasm_line_samples not just the number of samples,
but also the total period.
Based-on-a-patch-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-1sup5hkwrxocjvrmrmhs732o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The existing loop incremented the offset while using it as the array
index, when we went to an array of sym_hist_entry instances, we
should've moved the increment to outside of the array element reference,
oops, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 461c17f00f ("perf annotate: Store the sample period in each histogram bucket")
Link: http://lkml.kernel.org/n/tip-s3dm6uyrazlpag3f0psfia07@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we set the first column header according to wether
--show-total-period is being used, we need to size it accordingly.
Based-on-a-patch-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-pu504ffnit4m334k09hxcbs3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes bug noted by Jiri in https://lkml.org/lkml/2017/6/13/755 and
caused by commit d49dadea78 ("perf tools: Make 'trace' or
'trace_fields' sort key default for tracepoint events") not taking into
account that evlist is empty in pipe-mode.
Before this commit, pipe mode will only show bogus "100.00% N/A"
instead of correct output as follows:
$ perf record -o - sleep 1 | perf report -i -
# To display the perf.data header info, please use --header/--header-only options.
#
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
#
# Total Lost Samples: 0
#
# Samples: 8 of event 'cycles:ppH'
# Event count (approx.): 145658
#
# Overhead Trace output
# ........ ............
#
100.00% N/A
Correct output, after patch:
$ perf record -o - sleep 1 | perf report -i -
# To display the perf.data header info, please use --header/--header-only options.
#
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
#
# Total Lost Samples: 0
#
# Samples: 8 of event 'cycles:ppH'
# Event count (approx.): 191331
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. .................................
#
81.63% sleep libc-2.19.so [.] _exit
13.58% sleep ld-2.19.so [.] do_lookup_x
2.34% sleep [kernel.kallsyms] [k] context_switch
2.34% sleep libc-2.19.so [.] __GI___libc_nanosleep
0.11% perf [kernel.kallsyms] [k] __intel_pmu_enable_a
Reported-by: Jiri Olsa <jolsa@kernel.org>
Report-Link: https://lkml.kernel.org/r/20170613185422.GA6092@krava
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: d49dadea78 ("perf tools: Make 'trace' or 'trace_fields' sort key default for tracepoint events")
Link: https://lkml.kernel.org/r/20170721051157.47331-1-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we parse an event we may get a value from the kernel in response to
PERF_SAMPLE_WEIGHT being set in perf_event_attr->sample_type, and if it
is not set, then perf_sample->weight will be set to zero, which should
be ok according to a discussion with Andi Kleen [1]:
1: https://lkml.kernel.org/r/20170724174637.GS3044@two.firstfloor.org
Acked-by: Andi Kleen <andi@firstfloor.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-8ev8ufk3lzmvgz37yg9nv3qz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make perf stat use group read if there are groups defined. The group
read will get the values for all member of groups within a single
syscall instead of calling read syscall for every event.
We can see considerable less amount of kernel cycles spent on single
group read, than reading each event separately, like for following perf
stat command:
# perf stat -e {cycles,instructions} -I 10 -a sleep 1
Monitored with "perf stat -r 5 -e '{cycles:u,cycles:k}'"
Before:
24,325,676 cycles:u
297,040,775 cycles:k
1.038554134 seconds time elapsed
After:
25,034,418 cycles:u
158,256,395 cycles:k
1.036864497 seconds time elapsed
The perf_evsel__open fallback changes contributed by Andi Kleen.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170726120206.9099-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_evsel__read_counter() to read single or group counter. After
calling this function the counter's evsel::counts struct is filled with
values for the counter and member of its group if there are any.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170726120206.9099-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we use the size of struct perf_counts_values to read the
event, which prevents us to put any new member to the struct.
Adding perf_evsel__read_size to return size of the buffer needed for
event read.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170726120206.9099-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This file was copied from the kernel so that we could build tools/perf/
on older systems where some newer defines, such as these are available:
CC trace/beauty/fcntl.o
trace/beauty/fcntl.c: In function ‘syscall_arg__scnprintf_fcntl_arg’:
trace/beauty/fcntl.c:93:13: error: ‘F_OFD_SETLK’ undeclared (first use in this function)
cmd == F_OFD_SETLK || cmd == F_OFD_SETLKW || cmd == F_OFD_GETLK ||
^
trace/beauty/fcntl.c:93:13: note: each undeclared identifier is reported only once for each function it appears in
trace/beauty/fcntl.c:93:35: error: ‘F_OFD_SETLKW’ undeclared (first use in this function)
cmd == F_OFD_SETLK || cmd == F_OFD_SETLKW || cmd == F_OFD_GETLK ||
^
trace/beauty/fcntl.c:93:58: error: ‘F_OFD_GETLK’ undeclared (first use in this function)
cmd == F_OFD_SETLK || cmd == F_OFD_SETLKW || cmd == F_OFD_GETLK ||
^
mv: cannot stat ‘trace/beauty/.fcntl.o.tmp’: No such file or directory
make[4]: *** [trace/beauty/fcntl.o] Error 1
make[3]: *** [trace/beauty] Error 2
make[3]: *** Waiting for unfinished jobs....
CC tests/llvm.o
But we need to make sure that it is also in the tools/perf/MANIFEST file, that
is used to build a tarball for detached (from the kernel sources) compilation,
which was failing, with the above message, on a RHEL7.4 system, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 84d1d8a12d ("tools include uapi asm-generic: Grab a copy of fcntl.h")
Link: http://lkml.kernel.org/n/tip-2d5px7aq5stbwi24pgirwtlm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the first column header is always "Percent", fix it to show
correct column name based on given options, i.e. if using
--show-total-period, show "Event count" as a first column.
Reported-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/c3c902e7-95bc-16d4-366f-12eb034c5c8d@gmail.com
[ Extracted from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Today, when a JSON file fails parsing the build continues, but there are
no json files built in, which is difficult to debug later. Make the
build stop on a parse error instead.
v2: Add fixes from Sukadev. Now we handle architectures
with no JSON events correctly. And fix some stale comments.
Committer note:
Tested by running the cross build container tests, that were all failing
for v1.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170725001638.19990-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current --branch-history LBR annotation displays confused data. For
example, each cycles report is duplicated on both "from" and "to"
entries.
For example:
perf report --branch-history --no-children --stdio
--2.32%--main div.c:39 (COND_BWD CROSS_2M predicted:49.7% cycles:1)
main div.c:44 (predicted:49.7% cycles:1)
main div.c:42 (RET CROSS_2M cycles:2)
compute_flag div.c:28 (cycles:2)
compute_flag div.c:27 (RET CROSS_2M cycles:1)
rand rand.c:28 (cycles:1)
rand rand.c:28 (RET CROSS_2M cycles:1)
__random random.c:298 (cycles:1)
__random random.c:297 (COND_BWD CROSS_2M cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (COND_BWD CROSS_2M cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (RET CROSS_2M cycles:9)
The cycles should be tagged only on the "from". It's for the code block
that ends with "from", not for "to".
Another issue is the "predicted:49.7%" is duplicated too (tag on both
"from" and "to").
This patch tags the branch type/flag on "to" and tag the cycles on
"from".
For example:
--2.32%--main div.c:39 (COND_BWD CROSS_2M predicted:49.7%)
main div.c:44 (cycles:1)
main div.c:42 (RET CROSS_2M)
compute_flag div.c:28 (cycles:2)
compute_flag div.c:27 (RET CROSS_2M)
rand rand.c:28 (cycles:1)
rand rand.c:28 (RET CROSS_2M)
__random random.c:298 (cycles:1)
__random random.c:297 (COND_BWD CROSS_2M)
__random random.c:295 (cycles:1)
__random random.c:295 (COND_BWD CROSS_2M)
__random random.c:295 (cycles:1)
__random random.c:295 (RET CROSS_2M)
|
--2.23%--__random_r random_r.c:392 (cycles:9)
In this example, The "main div.c:39 (COND_BWD CROSS_2M predicted:49.7%)"
is "to" of branch and "main div.c:44 (cycles:1)" is "from" of branch.
It should be easier for understanding than before.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1500894547-18411-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf record -b -g <command>
perf report --branch-history
This merges the LBRs with the callgraphs.
However it would be nice if it also works without callgraphs (-g) set in
perf record, so that only the LBRs are displayed. But currently perf
report errors in this case. For example,
perf record -b <command>
perf report --branch-history
Error:
Selected -g or --branch-history but no callchain data. Did
you call 'perf record' without -g?
This patch displays the LBRs only even if callgraphs(-g) is not enabled
in perf record.
Change log:
v2: According to Milian Wolff's comment, change the obsolete error
message. Now the error message is:
┌─Error:─────────────────────────────────────┐
│Selected -g or --branch-history. │
│But no callchain or branch data. │
│Did you call 'perf record' without -g or -b?│
│ │
│ │
│Press any key... │
└────────────────────────────────────────────┘
When passing the last parameter to hists__fprintf,
changes "|" to "||".
hists__fprintf(hists, !quiet, 0, 0, rep->min_percent, stdout,
symbol_conf.use_callchain || symbol_conf.show_branchflag_count);
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1494240182-28899-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Modify the signature of tracepoint specific and trace_unhandled hooks to
add the perf_sample dict as a new argument.
Create a python helper function to print a dictionary.
Signed-off-by: Arun Kalyanasundaram <arunkaly@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Seongjae Park <sj38.park@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170721220422.63962-6-arunkaly@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The process_event python hook receives a dict with all perf_sample
entries, but the tracepoint specific and trace_unhandled hooks predate
the introduction of this dict, and do not receive it.
Add the aforementioned dict as an additional argument to the affected
handlers. To keep backwards compatibility (and avoid unnecessary work),
do not pass the dict if the number of arguments signals that handler
version predates this change.
Signed-off-by: Arun Kalyanasundaram <arunkaly@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Seongjae Park <sj38.park@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170721220422.63962-5-arunkaly@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Provide time_enabled, time_running and counter value in the perf_sample
dict.
Signed-off-by: Arun Kalyanasundaram <arunkaly@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Seongjae Park <sj38.park@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170721220422.63962-4-arunkaly@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the creation of the dict containing perf_sample entries into a
helper function to enable its reuse in other sample processing routines.
Signed-off-by: Arun Kalyanasundaram <arunkaly@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Seongjae Park <sj38.park@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170721220422.63962-3-arunkaly@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid allocating memory if hook handler is not available. This saves
unused memory allocation and simplifies error path.
Let handler in python_process_tracepoint point to either tracepoint
specific or trace_unhandled hook. Use dict to check if handler points to
trace_unhandled.
Remove the exit label in python_process_general_event and return when no
handler is available.
Signed-off-by: Arun Kalyanasundaram <arunkaly@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Seongjae Park <sj38.park@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170721220422.63962-2-arunkaly@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If script_desc__new() fails then the current code has a NULL
dereference. We don't actually need to do any cleanup, we can just
return NULL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/20170722073610.nnsyiwdcfl6bhn4t@mwanda
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf top command needs to unshare its fs from the helper threads in
order to successfully setns(2) during its symbol lookup. It also needs
to impelement a force flag to ignore ownership of perf-<pid>.map files.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1499305693-1599-6-git-send-email-kjlx@templeofstupid.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When libelf is disabled in the configuration, we get the following
linker error:
LINK libperf-jvmti.so
ld: cannot find -lelf
Makefile.perf:515: recipe for target 'libperf-jvmti.so' failed
Jiri pointed out that both librt and libelf are not really required. So
this patch fixes the linker error by getting rid of unwanted libraries
in the linker stage.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 209045adc2 ("perf tools: add JVMTI agent library")
Link: http://lkml.kernel.org/r/20170719011839.99399-5-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf annotate' was missing the handler for tracing data records.
Prior to this patch we obtained "unhandled" records when piping trace
events to perf annotate (using -D option to show the dump_printf
messages in process_event_synth_tracing_data_stub):
$ perf record -o - -e block:bio_free sleep 2 | perf annotate -D --stdio
...
0x78 [0xc]: PERF_RECORD_TRACING_DATA: unhandled!
...
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Paul Turner <pjt@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170719011839.99399-4-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The goal is to allow users to override linking of libraries that
were automatically added to PERFLIBS.
EXCLUDE_EXTLIBS contains linker flags to be removed from LIBS
while EXTRA_PERFLIBS contains linker flags to be added.
My use case is to force certain library to be build statically,
e.g. for libelf:
EXCLUDE_EXTLIBS=-lelf EXTRA_PERFLIBS=path/libelf.a
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Paul Turner <pjt@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170719011839.99399-3-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When converting from atomic_t to refcount_t we didn't follow the usual
step of initializing it to one before taking any new reference, which
trips over checking if taking a reference for a freed refcount_t, fix
it.
Brendan's report:
---
It's 4.12-rc7, with node v4.4.1. I'm building 4.13-rc1 now, as I hit
what I think is another unrelated perf bug and I'm starting to wonder
what else is broken on that version:
(root) /mnt/src/linux-4.12-rc7/tools/perf # ./perf record -F 99 -a -e
cpu-clock --cgroup=docker/f9e9d5df065b14646e8a11edc837a13877fd90c171137b2ba3feb67a0201cb65
-g
perf: /mnt/src/linux-4.12-rc7/tools/include/linux/refcount.h:108:
refcount_inc: Assertion `!(!refcount_inc_not_zero(r))' failed.
Aborted
that used to work...
---
Testing it:
Before:
# perf stat -e cycles -C 0 --cgroup /
perf: /home/acme/git/linux/tools/include/linux/refcount.h:108: refcount_inc: Assertion `!(!refcount_inc_not_zero(r))' failed.
Aborted (core dumped)
#
After:
# perf stat -e cycles -C 0 --cgroup /
^C
Performance counter stats for 'CPU(s) 0':
132,081,393 cycles /
2.492942763 seconds time elapsed
#
Reported-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Acked-by: Elena Reshetova <elena.reshetova@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sudeep Holla <Sudeep.Holla@arm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 79c5fe6db8 ("perf cgroup: Convert cgroup_sel.refcnt from atomic_t to refcount_t")
Link: http://lkml.kernel.org/n/tip-l7ovfblq14ip2i08m1g0fkhv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On s390x the kernel text segment starts at address 0x0. When perf
report reads kernel symbols from vmlinux file it adds an offset of
0x1000.
For example see symbol set_reset_devices:
[root@s8360047 linux-devel]# nm -A vmlinux| fgrep set_reset_devices
vmlinux:0000000001379000 t set_reset_devices
[root@s8360047 linux-devel]#
[root@s8360047 linux-devel]# fgrep set_reset_devices /proc/kallsyms
0000000001379000 t set_reset_devices
[root@s8360047 linux-devel]#
The kernel symbol table and the vmlinux file have the same address for
symbol set_reset_devices namely 1379000.
When perf report reads this symbols it displays it with address
symbol__new: set_reset_devices 0x137a000-0x137a018
There is a difference between perf report and vmlinux of 0x1000.
The reason for the difference is at kernel symbol load time in function
dso__load_sym(). The vmlinux file is investigated with its ELF header.
Command readelf shows this:
Section Headers:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
[ 0] NULL 0000000000000000 00000000
0000000000000000 0000000000000000 0 0 0
[ 1] .text PROGBITS 0000000000000000 00001000
0000000000b0e0c2 0000000000000000 AX 0 0 128
This leads to an invalid calculation of the symbol start address, see
file utit/symbol-elf.c line 974:
/* Adjust symbol to map to file offset */
if (adjust_kernel_syms)
sym.st_value -= shdr.sh_addr - shdr.sh_offset;
With shdr.sh_addr set to 0x0 and shdr.sh_offset set to 0x1000 as read
from the ELF .text section 0x1000 is added to the symbol address.
I would like to fix this by introducing an archticture specific function
named elf__needs_adjust_symbols(). This is the same approach as done by
PowerPC. The function currently does not exist for s390x and the
default weak one is used. The s390x specific one returns false when
symsrc_init() is invoked for kernel symbols and results in variable
adjust_kernel_syms being false. This omits the adjustment and the
correct address is displayed (when symbol resolvement does not work).
The s390x specific function returns false for kernel symbol adjustment
and returns true for kernel modules, processes and shared libraries.
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
LPU-Reference: 20170713130252.6167-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were showing the total number of samples, not the total period as
asked by the user, fix it.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Milian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/n/tip-lh2nh89rtqn5x5vbfthw6qml@git.kernel.org
Fixes: 0c4a5bcea4 ("perf annotate: Display total number of samples with --show-total-period")
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Ingo Molnar:
"Two hw-enablement patches, two race fixes, three fixes for regressions
of semantics, plus a number of tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Add proper condition to run sched_task callbacks
perf/core: Fix locking for children siblings group read
perf/core: Fix scheduling regression of pinned groups
perf/x86/intel: Fix debug_store reset field for freq events
perf/x86/intel: Add Goldmont Plus CPU PMU support
perf/x86/intel: Enable C-state residency events for Apollo Lake
perf symbols: Accept zero as the kernel base address
Revert "perf/core: Drop kernel samples even though :u is specified"
perf annotate: Fix broken arrow at row 0 connecting jmp instruction to its target
perf evsel: State in the default event name if attr.exclude_kernel is set
perf evsel: Fix attr.exclude_kernel setting for default cycles:p
In fixing the --show-total-period option it was noticed that the value
of sample->period was being overwritten, fix it.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: fd36f3dd79 ("perf hist: Pass struct sample to __hists__add_entry()")
Link: http://lkml.kernel.org/r/1500500215-16646-1-git-send-email-treeze.taeung@gmail.com
[ split from a larger patch, added the Fixes tag ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll use it soon, when fixing --show-total-period.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1500500215-16646-1-git-send-email-treeze.taeung@gmail.com
[ split from a larger patch, do the math in __symbol__inc_addr_samples() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pave the way to use perf_sample fields in the annotate code, storing
sample->period in sym_hist->addr->period and its sum in
sym_hist->period.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1500500215-16646-1-git-send-email-treeze.taeung@gmail.com
[ split and adjusted from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To make it more clear that it is the sum of all the nr_samples fields in the
addr[] entries, i.e.:
sym_hist->nr_samples = sum(sym_hist->addr[0 .. symbol__size(sym)]->nr_samples)
Committer notes:
Taeung had renamed it to total_samples, but using nr_samples, as in the
added explanation above, looks clearer and establishes the direct
connection, making clear it is about the _number_ of samples.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1500500211-16599-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
struct sym_hist has addr[] but it should have not only number of samples
but also the sample period. So use new struct symhist_entry to pave the
way to have that.
Committer notes:
This initial patch will only introduce the struct sym_hist_entry and use
only the nr_samples member, which makes the code clearer and paves the
way to save the period as well.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1500500205-16553-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Replacing prefixcmp(), same purpose, inverted result, so standardize on
the kernel variant, to reduce silly differences among tools/ and the
kernel sources, making it easier for people to work in both codebases.
And then doing:
if (strstarts(option, "no-"))
Looks clearer than doing:
if (!prefixcmp(option, "no-"))
To figure out if option starts witn "no-".
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-kaei42gi7lpa8subwtv7eug8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoiding a loop, so now its quite convenient to ssh to a machine and
then simply do:
# perf trace
To trace all syscalls without causing a loop.
This was possible using --filter-pids, i.e. once you noticed the loop,
get the sshd pid and add it to --filter-pids, restarting the 'perf
trace'.
Now to figure out how to do that in a X terminal, the other common
scenario, which is way more involved, as there are multiple processes
communicating to process terminal activity...
Using --filter-pids + '-e \!syscall,names,you,dont,need' may be a good
approximation when having to do syswide tracing on your workstation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-68rjeao9wnpylla41htk7xps@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No change in functionality, just to make clearer that what we want when
filtering the tracer pid in a system wide tracing session is to avoid a
feedback loop.
This also paves the way for a more interesting loop avoidance algorithm,
one that tries to figure out if we are in a ssh session, xterm, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-5fcttc5kdjkcyp9404ezkuy9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we make sure we have recent enough defines for things
such as 'perf trace' system call argument beautifiers.
For instance, the 'clone' syscall argument 'flag' needs to use
CLONE_NEWCGROUP, and that is not available in RHEL7.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-81sln0ng4a2lcxrth14vcov4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For tracepointless syscalls, like clone, otherwise get them from the
tracepoint's /format file.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ml5qvv1w5k96ghwhxpzzsmm3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we don't have syscalls:sys_{enter,exit}_NAME, we had to resort to
dumping all the 6 syscall arguments, fix it by providing that info for
such syscalls, like 'clone'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dfq1jtrxj8dqvqoeqqpr3slu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All callers now can use syscall__arg_val(arg, idx), be it to iterate
thru the syscall arguments while taking into account alignment, or to
get values for other arguments that affect how the current argument
should be formatted (think of fcntl's 'cmd' and 'arg' arguments).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wm5b156d8kro1r4y3b33eyta@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously we only used the syscall_fmt when we had sc->tp_format set,
i.e. when we found the (enter, exit) pair in tracefs/events/syscalls/.
But we really only need to use what is in sc->arg_fmt to apply the arg
beautifiers to the syscall argument values, so do it.
With this we will be able to provide formatters to the "clone" syscall,
which doesn't have entries in tracefs/events/syscalls/.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-y41nl41jrayjo5ucnde2peix@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At least "clone" doesn't have (enter, exit) entries tracefs/events/syscalls/,
but we can provide a syscall_fmt and use it instead, as will be done for
"clone" in the next cset.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-o12kejgcxddyovn2hlg4gbim@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just suppress them, not used by the kernel.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-atpt07y2x9a8ttlwja94ow3j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An earlier kernel patch allowed enabling PT and LBR at the same time on
Goldmont.
commit ccbebba4c6 ("perf/x86/intel/pt: Bypass PT vs. LBR exclusivity
if the core supports it")
However, users still cannot use Intel PT and LBRs simultaneously. $
sudo perf record -e cycles,intel_pt//u -b -- sleep 1 Error: PMU
Hardware doesn't support sampling/overflow-interrupts.
PT implicitly adds dummy event in perf tool. dummy event is software
event which doesn't support LBR.
Always setting no branch for dummy event in Intel PT.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170630141656.1626-2-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The reason of introducing the tracking event (a dummy software event) is
to collect side-band information. Additional sampling is wasteful.
no_aux_samples should be set for tracking event.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170630141656.1626-1-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show branch type in callchain entry. The branch type is printed
with other LBR information (such as cycles/abort/...).
For example:
perf record -g -j any,save_type
perf report --branch-history --stdio --no-children
38.50% div.c:45 [.] main div
|
---main div.c:42 (RET CROSS_2M cycles:2)
compute_flag div.c:28 (cycles:2)
compute_flag div.c:27 (RET CROSS_2M cycles:1)
rand rand.c:28 (cycles:1)
rand rand.c:28 (RET CROSS_2M cycles:1)
__random random.c:298 (cycles:1)
__random random.c:297 (COND_BWD CROSS_2M cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (COND_BWD CROSS_2M cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (RET CROSS_2M cycles:9)
Change log
v6: Remove the branch_type_str() since it's moved to branch.c.
v5: Rewrite the branch info print code in util/callchain.c.
v4: Comparing to previous version, the major changes are:
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1500379995-6449-8-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show the branch type statistics at the end of perf report --stdio.
For example:
perf report --stdio
COND_FWD: 28.5%
COND_BWD: 9.4%
CROSS_4K: 0.7%
CROSS_2M: 14.1%
COND: 37.9%
UNCOND: 0.2%
IND: 6.7%
CALL: 26.5%
RET: 28.7%
SYSRET: 0.0%
The branch types are:
COND_FWD: conditional forward
COND_BWD: conditional backward
COND: conditional branch
UNCOND: unconditional branch
IND: indirect
CALL: function call
IND_CALL: indirect function call
RET: function return
SYSCALL: syscall
SYSRET: syscall return
COND_CALL: conditional function call
COND_RET: conditional function return
CROSS_4K and CROSS_2M:
They are the metrics checking for branches cross 4K or 2MB pages.
It's an approximate computing. We don't know if the area is 4K or
2MB, so always compute both.
To make the output simple, if a branch crosses 2M area, CROSS_4K
will not be incremented.
Change log
v7: Since the common branch type definitions are changed, some
tags/strings are updated accordingly.
v6: Remove branch_type_stat_display() since it's moved to branch.c.
v5: Remove the unnecessary sort__mode checking in
hist_iter__branch_callback().
v4: Comparing to previous version, the major changes are:
Add the computing of JCC forward/JCC backward and cross page checking
by using the from and to addresses.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1500379995-6449-7-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create new util/branch.c and util/branch.h to contain the common branch
functions. Such as:
branch_type_count(): Count the numbers of branch types
branch_type_name() : Return the name of branch type
branch_type_stat_display(): Display branch type statistics info
branch_type_str(): Construct the branch type string.
The branch type is saved in branch_flags.
Change log:
v8: Change PERF_BR_NONE to PERF_BR_UNKNOWN.
v7: Since the common branch type name is changed (e.g. JCC->COND),
this patch is performed the modification accordingly.
v6: Move that multiline conditional code inside {} brackets.
Move branch_type_stat_display() from builtin-report.c to
branch.c.
Move branch_type_str() from callchain.c to branch.c.
v5: It's a new patch in v5 patch series.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1500379995-6449-6-git-send-email-yao.jin@linux.intel.com
[ Don't use 'index' and 'stat' as names for variables, it shadows global decls in older distros ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The branch info such as predicted/cycles/... are printed at the
callchain entries.
For example: perf report --branch-history --no-children --stdio
--1.07%--main div.c:39 (predicted:52.4% cycles:1 iterations:17)
main div.c:44 (predicted:52.4% cycles:1)
main div.c:42 (cycles:2)
compute_flag div.c:28 (cycles:2)
compute_flag div.c:27 (cycles:1)
rand rand.c:28 (cycles:1)
rand rand.c:28 (cycles:1)
__random random.c:298 (cycles:1)
__random random.c:297 (cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (cycles:1)
But the current code is difficult to maintain and extend. This patch
refactors the code for easy maintenance.
Change log:
v6: 1. Put the multiline condition code into {} brackets in
counts_str_build()
2. Keep the original display order, that is:
predicted, abort, cycles, iterations
v5: It's a new patch in v5 patch series.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1500379995-6449-5-git-send-email-yao.jin@linux.intel.com
[ Don't use 'index' as a name for a variable, it shadows a globa decl in older distros ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The option indicates the kernel to save branch type during sampling.
One example:
perf record -g --branch-filter any,save_type <command>
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1500379995-6449-4-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add header record types to pipe-mode, reusing the functions
used in file-mode and leveraging the new struct feat_fd.
For alignment, check that synthesized events don't exceed
pagesize.
Add the perf_event__synthesize_feature event call back to
process the new header records.
Before this patch:
$ perf record -o - -e cycles sleep 1 | perf report --stdio --header
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
...
After this patch:
$ perf record -o - -e cycles sleep 1 | perf report --stdio --header
# ========
# captured on: Mon May 22 16:33:43 2017
# ========
#
# hostname : my_hostname
# os release : 4.11.0-dbx-up_perf
# perf version : 4.11.rc6.g6277c80
# arch : x86_64
# nrcpus online : 72
# nrcpus avail : 72
# cpudesc : Intel(R) Xeon(R) CPU E5-2696 v3 @ 2.30GHz
# cpuid : GenuineIntel,6,63,2
# total memory : 263457192 kB
# cmdline : /root/perf record -o - -e cycles -c 100000 sleep 1
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# pmu mappings: intel_bts = 6, uncore_imc_4 = 22, uncore_sbox_1 = 47, uncore_cbox_5 = 33, uncore_ha_0 = 16, uncore_cbox
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
...
Support added for the subcommands: report, inject, annotate and script.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-16-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add show_feat_hdr to control level of printed information of feature
headers.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-15-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are three FEAT_OP* macros:
- FEAT_OPA: for features without process record.
- FEAT_OPP: for features with process record.
- FEAT_OPF: like FEAT_OPP but to show only if show_full_info flags
is set.
To add pipe-mode headers we need yet another variation of the macros
(one to specify whether a feature generates an auxiliar record).
Instead, we redefine macros so that:
- show_full_info is specified as an argument (to remove the
FEAT_OPF variation) and,
- it always sets "process" handler (to remove the FEAT_OPA variation).
Individual process handlers can be NULLed individually.
This allows to define two variations only:
- FEAT_OPR: synthesizes auxiliar event record.
- FEAT_OPN: doesn't synthesize an auxiliar event record.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-14-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend struct feat_fd to use a temporal buffer in pipe-mode, instead of
perf.data's file descriptor.
The header features build_id and aux_trace already have logic to print
in file-mode that heavily rely on lseek the file. For now, leave such
features inactive in pipe-mode and print a warning if their functions
are called in pipe-mode.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-13-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In pipe-mode, we will operate over a buffer instead of a file descriptor
but write_pmu_mappings uses lseek to move over the perf.data file.
Refactor write_pmu_mappings to avoid the usage of lseek and allow
reusing the same logic in pipe-mode (next patch).
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-12-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As preparation for using header records in-pipe mode, replace int fd
with struct feat_fd ff in read functions for all header record types.
This patch does not change behavior.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-11-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
struct perf_file_section is used in process_##_feat as container for
size and offset in the file descriptor. These attributes are meaninful
in pipe-mode but struct perf_file_section is not.
Add offset and size variables to struct feat_fd to store
perf_file_section's values in file-mode. Later on, the same variables
can be reused for pipe-mode.
This patch does not change behavior.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-10-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As preparation for using header records in pipe-mode, replace int fd
with struct feat_fd ff in process functions for all header record types.
This patch does not change behavior.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-9-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As preparation for using header records in pipe mode, replace int fd
with struct feat_fd ff in print functions for all header record types.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-8-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce struct feat_fd. This patch uses it as a wrapper around fd in
write_* functions for feature headers. Next patches will extend its
functionality to other feature header functions.
This patch does not change behavior.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-7-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that writen takes a const buffer, use it in do_write instead of
duplicating its functionality.
Export do_write to use it consistently in header.c and build_id.c .
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-6-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make buf in helper function "writen" constant to simplify the life of
its callers.
This requires to hack a cast of buf prior to passing it to "ion" which
is simpler than the alternative of reworking the "ion" function to
provide a read and a write paths, the latter with constant buf argument.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-5-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do not proceed if write_padded() error failed.
Also, add comments to remind that the return value of write_* functions
in util/header.c is an errno code and not the number of bytes written.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-4-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Simplify code by adding a macro to handle the common case of processing
header features that are a simple string.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-3-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Most callers of readn() in perf header read either a 32 or a 64 bits
number, error check it and swap it, if necessary.
Create do_read_u32 and do_read_u64 to simplify these use cases.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-2-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently perf supports a mode to query inline stack. It works well for
finding user space inline functions but it doesn't work for kernel ones,
due to some unnecessary check.
This patch removes these unnecessary checks. Now kernel inline functions
can be reported.
For example:
perf report --inline -g func --stdio
|--46.19%--do_huge_pmd_anonymous_page
| do_huge_pmd_anonymous_page (inline)
| __do_huge_pmd_anonymous_page (inline)
| __SetPageUptodate (inline)
| __set_bit (inline)
The result is compared with the output of addr2line. They match.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1500409892-15904-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing syscall_fmt::err_msg and instead always formatting negative
returns as errno values.
With this we can remove a lot of entries that have no special handling
besides the ones we can do by looking at the tracefs format files, i.e.
the types for the fields (e.g. pid_t), well known names (e.g. fd).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-rg9u7a3qqdnzo37d212vnz2o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf trace' tool is suppressing args set to zero, with the
exception of string tables (strarrays), which are kinda like enums, i.e.
we have maps to go from numbers to strings.
But the 'cmd' fcntl arg requires more specialized treatment, as its
value will regulate if the next fcntl syscall arg, 'arg', should be
ignored (not used) and also how to format the syscall return (fd, file
flags, etc), so add a 'show_zero" bool to struct syscall_arg_fmt, to
regulate this more explicitely.
Will be used in a following patch with fcntl, here is just the
mechanism.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-all738jctxets8ffyizp5lzo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of having syscall_fmt.{arg_scnprintf,arg_parm}, introduce
struct syscall_arg_fmt and have these two, paving the way for more
state to change the formatting algorithms.
For instance, in the 'fcntl' 'cmd' case it is better not to suppress
it when being zero, showing instead its name "DUPFD".
We had that in an ad-hoc way just for strarrays, but with more involved
cases like fcntl, that can't be done with just a strarray, we'll need
a ".show_zero" arg in the 'cmd' syscall_arg_fmt.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ch06o2j72zbjx5xww4qp67au@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One more looking prettier.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ytr7idkese8sjtvn5g60130e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like will be done with fcntl(fd, F_GETLEASE, F_RDLCK|F_WRLCK|F_UNLCK)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3p11bgirtntjfmbixfkz8i2m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some of the stat events are quite rare to find on common machines (like
front end cycles).
Adding an 'optional' term to mark such events in attr tests. Event
marked as optional will not fail the test case if it's not found in
results.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-15-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
>From following commit:
commit 4979d0c7d0 ("perf stat record: Add record command")
we started to assign PERF_SAMPLE_IDENTIFIER to sample_type.
Fixing the attr stat tests accordingly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-14-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have a test to detect to highest precise possible, so test can't just
predict precise_ip value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-13-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The final period can differ from what user specifies on command line due
to the perf_event_max_sample_rate sysctl setup.
Thus we can't predixt the sample_period value any more.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-12-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The stat command creates all events disabled and enables them either
manualy or via the enable_on_exec bit.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The record command now properly returns the status of the tracee if
there's any. We need to properly set the expected return value of the
tracee in the attr tests.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Milian Wolff
Taeung Song
Jiri Olsa
Linus Torvalds
Arnaldo Carvalho de Melo
Kan Liang
Sukadev Bhattiprolu
Jack Henschel
Ravi Bangoria
Jin Yao
Li Bin
David Carrillo-Cisneros
Mike Leach
Konstantin Khlebnikov
Andi Kleen
Kim Phillips
Wang Nan
Adrian Hunter
Thomas Richter
Naveen N. Rao
Ingo Molnar
Geneviève Bastien
Arun Kalyanasundaram
Dan Carpenter
Krister Johansen
Sudeep Holla
Arnaldo Carvalho de Melo