ocfs2_queue_orphans() has an open coded readdir loop which can easily just
use a directory accessor function.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
filldir_t can take this, so don't turn de->inode into a 32 bit value. Right
now this doesn't make a difference since no ocfs2 inodes overflow that, but
it could be a nasty surprise later on if some kernel code is calling
ocfs2_dir_foreach_blk() and expecting real inode numbers back...
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
Put this in it's own function so that the functionality can be overridden.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
The code for adding, removing, deleting directory entries was splattered all
over namei.c. I'd rather have this all centralized, so that it's easier to
make changes for inline dir data, and eventually indexed directories.
None of the code in any of the functions was changed. I only removed the
static keyword from some prototypes so that they could be exported.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
We'll want to reuse most of this when pushing inline data back out to an
extent. Keeping this part as a seperate patch helps to keep the upcoming
changes for write support uncluttered.
The core portion of ocfs2_zero_cluster_pages() responsible for making sure a
page is mapped and properly dirtied is abstracted out into it's own
function, ocfs2_map_and_dirty_page(). Actual functionality doesn't change,
though zeroing becomes optional.
We also turn part of ocfs2_free_write_ctxt() into a common function for
unlocking and freeing a page array. This operation is very common (and
uniform) for Ocfs2 cluster sizes greater than page size, so it makes sense
to keep the code in one place.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
By doing this, we can remove any higher level logic which has to have
knowledge of btree functionality - any callers of ocfs2_write_begin() can
now expect it to do anything necessary to prepare the inode for new data.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
Implement sops->show_options() so as to allow /proc/mounts to show the mount
options.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
This is technically harmless (recovery will clean it out later), but leaves
a bogus entry in the slot_map which really shouldn't be there.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
delete_tail_recs in ocfs2_try_to_merge_extent() was only ever set, remove
it.
Signed-off-by: Tao Mao <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
ocfs2_insert_type->ins_free_records was only used in one place, and was set
incorrectly in most places. We can free up some memory and lose some code by
removing this.
* Small warning fixup contributed by Andrew Mortom <akpm@linux-foundation.org>
Signed-off-by: Tao Mao <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block:
[BLOCK] s390 xpram typo
[BLOCK] Only include the compat ioctl code if CONFIG_BLOCK is set
[BLOCK] Better fix for do_blk_trace_setup() for !CONFIG_BLOCK
[BLOCK] Move sector_div() from blkdev.h to kernel.h
Big thanks go to Mathias Kolehmainen for reporting the bug, providing
debug output and testing the patches I sent him to get it working.
The fix was to stop calling ntfs_attr_set() at mount time as that causes
balance_dirty_pages_ratelimited() to be called which on systems with
little memory actually tries to go and balance the dirty pages which tries
to take the s_umount semaphore but because we are still in fill_super()
across which the VFS holds s_umount for writing this results in a
deadlock.
We now do the dirty work by hand by submitting individual buffers. This
has the annoying "feature" that mounting can take a few seconds if the
journal is large as we have clear it all. One day someone should improve
on this by deferring the journal clearing to a helper kernel thread so it
can be done in the background but I don't have time for this at the moment
and the current solution works fine so I am leaving it like this for now.
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (51 commits)
[DLM] block dlm_recv in recovery transition
[DLM] don't overwrite castparam if it's NULL
[GFS2] Get superblock a different way
[GFS2] Don't try to remove buffers that don't exist
[GFS2] Alternate gfs2_iget to avoid looking up inodes being freed
[GFS2] Data corruption fix
[GFS2] Clean up journaled data writing
[GFS2] GFS2: chmod hung - fix race in thread creation
[DLM] Make dlm_sendd cond_resched more
[GFS2] Move inode deletion out of blocking_cb
[GFS2] flocks from same process trip kernel BUG at fs/gfs2/glock.c:1118!
[GFS2] Clean up gfs2_trans_add_revoke()
[GFS2] Use slab operations for all gfs2_bufdata allocations
[GFS2] Replace revoke structure with bufdata structure
[GFS2] Fix ordering of dirty/journal for ordered buffer unstuffing
[GFS2] Clean up ordered write code
[GFS2] Move pin/unpin into lops.c, clean up locking
[GFS2] Don't mark jdata dirty in gfs2_unstuffer_page()
[GFS2] Introduce gfs2_remove_from_ail
[GFS2] Correct lock ordering in unlink
...
The early console device is special as it already has all needed data
set and raw3215[0] allocated from con3215_init(). Therefore, it needs
special treatment in the probe function so it can be matched with the
3215 driver which is already owning it.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Make sure parameter list of the pfault token function is eight byte
aligned. Otherwise we can get specification exceptions.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Replace the hardcoded 4096 value with the PAGE_SIZE macro.
Converted a few decimal numbers to readable hex numbers.
Use of PAGE_SIZE required a small change to page.h
to allow PAGE_SIZE to be used from assembler/linker scripts.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Introduce a consistent style in vmlinux.lds.
This style is gradually being introduced for all archs.
A few lables were moved inside the section definition so
they are assigned the correct value of gcc decide to align
the content to another address than the one . has.
In the past this has fixed several bugs but for s390 it
will not impact due to all the alignmnet already introduced.
Stabs definitions are consolidated in asm-generic/vmlinux.lds.h
This patch also introduce support for DWARF - without knowing
if this makes sense for s390.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Constraint for err is wrong since it is preinitialized and the code
relies on it in case of an exception.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Currently there are situations, where the tape medium state (loaded, unloaded,
unknown) is not set correctly. The reason is that the medium association
field is used to determine the medium state. This not always leads to
correct results. To fix that we use another field of the medium sense
data instead.
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
After assigning values to specific registers memset was called. This
may clobber the contents of the used registers.
To solve this extract the two used inline assemblies into small
functions that don't call any functions.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Prevent that modules get loaded at addresses below 4GB to
prevent exchanging system call table entries.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
memcpy_real uses the mvcle instruction. This instruction alters all used
registers (source, destination and 2 x count). Therefore we have to flag
those registers as input/output registers (+d). In addition to that, we
have to specify, that we read from memory designated by "src" and write to
memory designated by "dest".
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
If we use the CLEAR ipl option, reipl is faster, since then VM can release
the memory, which has been paged out.
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Replacing n & (n - 1) for power of 2 check by is_power_of_2(n)
Signed-off-by: vignesh babu <vignesh.babu@wipro.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
According to C99 6.3.2.3 it's undefined what happens if a converted
pointer is used to call a function whose type is not compatible with
the pointed-to type.
That's what the qdio code is doing, so fix it.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
slab cache debugging code has been changed so that we always get a
minimum alignment of the alignment of a 64-integer. Since this is
8 on s390/s390x there is no need of ARCH_KMALLOC_MINALIGN anymore.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
ext_int_info_t is no longer used in entry(64).S Instead do_extint is a C
function that handles the hash search.
As the structure is handled in C code, we can also remove the packed
attribute to avoid alignment issues. (Currently there is no alignment
problem in ext_int_info_t, even if packet)
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Also removes a bunch of ^L in drivers/s390/cio/cmf.c
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
There is no need to assign "0" to "hops" twice. Remove one assigment.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The termination condition of the loop that prints the operands of
an instruction doesn't stop after the maximum of 6 operands.
It continues with the operands of the next instruction format
instead which create really long lines.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
arch/s390/Kconfig tells us that CONFIG_APPLDATA_BASE is bool and hence can
never be built modular. Given this, defining appldata_exit() function is
pointless (and wasteful, actually). Remove all that.
Previous patch annotated appldata_offline_cpu() as __cpuexit, but now with the
__exit function appldata_exit() gone, the only callsite that references it is
__cpuinit, so this function can also be __cpuinit, thereby saving space when
HOTPLUG_CPU=n.
Signed-off-by: Satyam Sharma <satyam@infradead.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
appldata_offline_cpu() is only called from __cpuinit-marked hotplug
notifier callback and from the __exit-marked module_exit function,
therefore candidate for __cpuexit.
BTW the __exit module_exit function appldata_exit() of this driver fails to
unregister_hotcpu_notifier() the notifier_block that was registered by
appldata_init() during module startup. This will lead to oops if hotplug
notification comes after module has been unloaded. Let's fix this by
unregistering the notifier appropriately (before appldata_offline_cpu()'ing
the CPUs).
Signed-off-by: Satyam Sharma <satyam@infradead.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Symptom: zcrypt fails by setting all PCIXCC/CEX2C cards offline for a
certain type of invalid keys.
Problem: zcrypt does not handle rc=12/rs=769 request responses correctly
Solution: modify convert_type86_ica() to handle these error codes correctly
Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Resetting of a all queues within a domain requires that a domain must
be selected first.
Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
There was the possibilty that an action like ccw_device_set_offline()
triggered by a device gone machine check might trigger a not oper
event. Unfortunately, this could lead to the situation that we tried
to unregister a subchannel twice: Once from the slow path evaluation,
and once via the not oper event.
Fix this by always using the same mechanism (css_schedule_eval()) for
triggering the unregister. This makes sure that unregistration will
only be done once. As an added bonus, it also simplyfies the code.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Don't forget to set dev->groups for early ccw devices like the
console device so the default attributes are created.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Disable channel measurements for all ccw devices via the ccw bus's
shutdown method. Clear residual cmf related information that may be
in the schib when setting up a new subchannel.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Introduce a shutdown method for the ccw bus that calls the driver
specific shutdown method in struct ccw_driver.
Switch zfcp to the new ccw_driver shutdown method.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
