Commit Graph

169 Commits

Author SHA1 Message Date
Paul Gortmaker 1b0048a44c rcu: Make rcu_nocb_poll an early_param instead of module_param
The as-documented rcu_nocb_poll will fail to enable this feature
for two reasons.  (1) there is an extra "s" in the documented
name which is not in the code, and (2) since it uses module_param,
it really is expecting a prefix, akin to "rcutree.fanout_leaf"
and the prefix isn't documented.

However, there are several reasons why we might not want to
simply fix the typo and add the prefix:

1) we'd end up with rcutree.rcu_nocb_poll, and rather probably make
a change to rcutree.nocb_poll

2) if we did #1, then the prefix wouldn't be consistent with the
rcu_nocbs=<cpumap> parameter (i.e. one with, one without prefix)

3) the use of module_param in a header file is less than desired,
since it isn't immediately obvious that it will get processed
via rcutree.c and get the prefix from that (although use of
module_param_named() could clarify that.)

4) the implied export of /sys/module/rcutree/parameters/rcu_nocb_poll
data to userspace via module_param() doesn't really buy us anything,
as it is read-only and we can tell if it is enabled already without
it, since there is a printk at early boot telling us so.

In light of all that, just change it from a module_param() to an
early_setup() call, and worry about adding it to /sys later on if
we decide to allow a dynamic setting of it.

Also change the variable to be tagged as read_mostly, since it
will only ever be fiddled with at most, once at boot.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2013-01-08 14:12:19 -08:00
Paul Gortmaker 353af9c9a8 rcu: Prevent soft-lockup complaints about no-CBs CPUs
The wait_event() at the head of the rcu_nocb_kthread() can result in
soft-lockup complaints if the CPU in question does not register RCU
callbacks for an extended period.  This commit therefore changes
the wait_event() to a wait_event_interruptible().

Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2013-01-08 14:12:18 -08:00
Paul E. McKenney c635a4e1c2 rcu: Separate accounting of callbacks from callback-free CPUs
Currently, callback invocations from callback-free CPUs are accounted to
the CPU that registered the callback, but using the same field that is
used for normal callbacks.  This makes it impossible to determine from
debugfs output whether callbacks are in fact being diverted.  This commit
therefore adds a separate ->n_nocbs_invoked field in the rcu_data structure
in which diverted callback invocations are counted.  RCU's debugfs tracing
still displays normal callback invocations using ci=, but displayed
diverted callbacks with nci=.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-16 10:05:57 -08:00
Paul E. McKenney 3fbfbf7a3b rcu: Add callback-free CPUs
RCU callback execution can add significant OS jitter and also can
degrade both scheduling latency and, in asymmetric multiprocessors,
energy efficiency.  This commit therefore adds the ability for selected
CPUs ("rcu_nocbs=" boot parameter) to have their callbacks offloaded
to kthreads.  If the "rcu_nocb_poll" boot parameter is also specified,
these kthreads will do polling, removing the need for the offloaded
CPUs to do wakeups.  At least one CPU must be doing normal callback
processing: currently CPU 0 cannot be selected as a no-CBs CPU.
In addition, attempts to offline the last normal-CBs CPU will fail.

This feature was inspired by Jim Houston's and Joe Korty's JRCU, and
this commit includes fixes to problems located by Fengguang Wu's
kbuild test robot.

[ paulmck: Added gfp.h include file as suggested by Fengguang Wu. ]

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-16 10:05:56 -08:00
Paul E. McKenney aac1cda34b Merge branches 'urgent.2012.10.27a', 'doc.2012.11.16a', 'fixes.2012.11.13a', 'srcu.2012.10.27a', 'stall.2012.11.13a', 'tracing.2012.11.08a' and 'idle.2012.10.24a' into HEAD
urgent.2012.10.27a: Fix for RCU user-mode transition (already in -tip).

doc.2012.11.08a: Documentation updates, most notably codifying the
	memory-barrier guarantees inherent to grace periods.

fixes.2012.11.13a: Miscellaneous fixes.

srcu.2012.10.27a: Allow statically allocated and initialized srcu_struct
	structures (courtesy of Lai Jiangshan).

stall.2012.11.13a: Add more diagnostic information to RCU CPU stall
	warnings, also decrease from 60 seconds to 21 seconds.

hotplug.2012.11.08a: Minor updates to CPU hotplug handling.

tracing.2012.11.08a: Improved debugfs tracing, courtesy of Michael Wang.

idle.2012.10.24a: Updates to RCU idle/adaptive-idle handling, including
	a boot parameter that maps normal grace periods to expedited.

Resolved conflict in kernel/rcutree.c due to side-by-side change.
2012-11-16 09:59:58 -08:00
Paul E. McKenney f0a0e6f282 rcu: Clarify memory-ordering properties of grace-period primitives
This commit explicitly states the memory-ordering properties of the
RCU grace-period primitives.  Although these properties were in some
sense implied by the fundmental property of RCU ("a grace period must
wait for all pre-existing RCU read-side critical sections to complete"),
stating it explicitly will be a great labor-saving device.

Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
2012-11-13 14:08:23 -08:00
Paul E. McKenney 7b2e6011f1 rcu: Rename ->onofflock to ->orphan_lock
The ->onofflock field in the rcu_state structure at one time synchronized
CPU-hotplug operations for RCU.  However, its scope has decreased over time
so that it now only protects the lists of orphaned RCU callbacks.  This
commit therefore renames it to ->orphan_lock to reflect its current use.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-08 11:50:11 -08:00
Antti P Miettinen 3705b88db0 rcu: Add a module parameter to force use of expedited RCU primitives
There have been some embedded applications that would benefit from
use of expedited grace-period primitives.  In some ways, this is
similar to synchronize_net() doing either a normal or an expedited
grace period depending on lock state, but with control outside of
the kernel.

This commit therefore adds rcu_expedited boot and sysfs parameters
that cause the kernel to substitute expedited primitives for the
normal grace-period primitives.

[ paulmck: Add trace/event/rcu.h to kernel/srcu.c to avoid build error.
	   Get rid of infinite loop through contention path.]

Signed-off-by: Antti P Miettinen <amiettinen@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-10-23 14:54:08 -07:00
Paul E. McKenney 9a0c6fef42 rcu: Make RCU_FAST_NO_HZ handle adaptive ticks
The current implementation of RCU_FAST_NO_HZ tries reasonably hard to rid
the current CPU of RCU callbacks.  This is appropriate when the CPU is
entering idle, where it doesn't have much useful to do anyway, but is most
definitely not what you want when transitioning to user-mode execution.
This commit therefore detects the adaptive-tick case, and refrains from
burning CPU time getting rid of RCU callbacks in that case.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-26 15:44:02 +02:00
Paul E. McKenney 5217192b85 Merge remote-tracking branch 'tip/smp/hotplug' into next.2012.09.25b
The conflicts between kernel/rcutree.h and kernel/rcutree_plugin.h
were due to adjacent insertions and deletions, which were resolved
by simply accepting the changes on both branches.
2012-09-25 10:01:45 -07:00
Paul E. McKenney bda4ec9f6a Merge branches 'bigrt.2012.09.23a', 'doctorture.2012.09.23a', 'fixes.2012.09.23a', 'hotplug.2012.09.23a' and 'idlechop.2012.09.23a' into HEAD
bigrt.2012.09.23a contains additional commits to reduce scheduling latency
	from RCU on huge systems (many hundrends or thousands of CPUs).

doctorture.2012.09.23a contains documentation changes and rcutorture fixes.

fixes.2012.09.23a contains miscellaneous fixes.

hotplug.2012.09.23a contains CPU-hotplug-related changes.

idle.2012.09.23a fixes architectures for which RCU no longer considered
	the idle loop to be a quiescent state due to earlier
	adaptive-dynticks changes.  Affected architectures are alpha,
	cris, frv, h8300, m32r, m68k, mn10300, parisc, score, xtensa,
	and ia64.
2012-09-24 20:02:22 -07:00
Paul E. McKenney 86f343b50b rcu: Fix CONFIG_RCU_FAST_NO_HZ stall warning message
The print_cpu_stall_fast_no_hz() function attempts to print -1 when
the ->idle_gp_timer is not pending, but unsigned arithmetic causes it
to instead print ULONG_MAX, which is 4294967295 on 32-bit systems and
18446744073709551615 on 64-bit systems.  Neither of these are the most
reader-friendly values, so this commit instead causes "timer not pending"
to be printed when ->idle_gp_timer is not pending.

Reported-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-09-23 07:42:52 -07:00
Paul E. McKenney 5fd4dc068c rcu: Avoid rcu_print_detail_task_stall_rnp() segfault
The rcu_print_detail_task_stall_rnp() function invokes
rcu_preempt_blocked_readers_cgp() to verify that there are some preempted
RCU readers blocking the current grace period outside of the protection
of the rcu_node structure's ->lock.  This means that the last blocked
reader might exit its RCU read-side critical section and remove itself
from the ->blkd_tasks list before the ->lock is acquired, resulting in
a segmentation fault when the subsequent code attempts to dereference
the now-NULL gp_tasks pointer.

This commit therefore moves the test under the lock.  This will not
have measurable effect on lock contention because this code is invoked
only when printing RCU CPU stall warnings, in other words, in the common
case, never.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-09-23 07:42:50 -07:00
Paul E. McKenney 115f7a7ca0 rcu: Apply for_each_rcu_flavor() to increment_cpu_stall_ticks()
The increment_cpu_stall_ticks() function listed each RCU flavor
explicitly, with an ifdef to handle preemptible RCU.  This commit
therefore applies for_each_rcu_flavor() to save a line of code.

Because this commit switches from a code-based enumeration of the
flavors of RCU to an rcu_state-list-based enumeration, it is no longer
possible to apply __get_cpu_var() to the per-CPU rcu_data structures.
We instead use __this_cpu_var() on the rcu_state structure's ->rda field
that references the corresponding rcu_data structures.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-09-23 07:42:50 -07:00
Paul E. McKenney b065a85354 rcu: Fix obsolete rcu_initiate_boost() header comment
Commit 1217ed1b (rcu: permit rcu_read_unlock() to be called while holding
runqueue locks) made rcu_initiate_boost() restore irq state when releasing
the rcu_node structure's ->lock, but failed to update the header comment
accordingly.  This commit therefore brings the header comment up to date.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-23 07:42:50 -07:00
Paul E. McKenney 5cc900cf55 rcu: Improve boost selection when moving tasks to root rcu_node
The rcu_preempt_offline_tasks() moves all tasks queued on a given leaf
rcu_node structure to the root rcu_node, which is done when the last CPU
corresponding the the leaf rcu_node structure goes offline.  Now that
RCU-preempt's synchronize_rcu_expedited() implementation blocks CPU-hotplug
operations during the initialization of each rcu_node structure's
->boost_tasks pointer, rcu_preempt_offline_tasks() can do a better job
of setting the root rcu_node's ->boost_tasks pointer.

The key point is that rcu_preempt_offline_tasks() runs as part of the
CPU-hotplug process, so that a concurrent synchronize_rcu_expedited()
is guaranteed to either have not started on the one hand (in which case
there is no boosting on behalf of the expedited grace period) or to be
completely initialized on the other (in which case, in the absence of
other priority boosting, all ->boost_tasks pointers will be initialized).
Therefore, if rcu_preempt_offline_tasks() finds that the ->boost_tasks
pointer is equal to the ->exp_tasks pointer, it can be sure that it is
correctly placed.

In the case where there was boosting ongoing at the time that the
synchronize_rcu_expedited() function started, different nodes might start
boosting the tasks blocking the expedited grace period at different times.
In this mixed case, the root node will either be boosting tasks for
the expedited grace period already, or it will start as soon as it gets
done boosting for the normal grace period -- but in this latter case,
the root node's tasks needed to be boosted in any case.

This commit therefore adds a check of the ->boost_tasks pointer against
the ->exp_tasks pointer to the list that prevents updating ->boost_tasks.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-23 07:42:50 -07:00
Paul E. McKenney 1e3fd2b38c rcu: Properly initialize ->boost_tasks on CPU offline
When rcu_preempt_offline_tasks() clears tasks from a leaf rcu_node
structure, it does not NULL out the structure's ->boost_tasks field.
This commit therefore fixes this issue.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-23 07:42:49 -07:00
Paul E. McKenney d7d6a11e86 rcu: Simplify quiescent-state detection
The current quiescent-state detection algorithm is needlessly
complex.  It records the grace-period number corresponding to
the quiescent state at the time of the quiescent state, which
works, but it seems better to simply erase any record of previous
quiescent states at the time that the CPU notices the new grace
period.  This has the further advantage of removing another piece
of RCU for which lockless reasoning is required.

Therefore, this commit makes this change.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-23 07:41:56 -07:00
Paul E. McKenney 1943c89de7 rcu: Reduce synchronize_rcu_expedited() latency
The synchronize_rcu_expedited() function disables interrupts across a
scan of all leaf rcu_node structures, which is not good for real-time
scheduling latency on large systems (hundreds or especially thousands
of CPUs).  This commit therefore holds off CPU-hotplug operations using
get_online_cpus(), and removes the prior acquisiion of the ->onofflock
(which required disabling interrupts).

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-23 07:41:56 -07:00
Paul E. McKenney bcfa57ce10 rcu: Eliminate signed overflow in synchronize_rcu_expedited()
In the C language, signed overflow is undefined.  It is true that
twos-complement arithmetic normally comes to the rescue, but if the
compiler can subvert this any time it has any information about the values
being compared.  For example, given "if (a - b > 0)", if the compiler
has enough information to realize that (for example) the value of "a"
is positive and that of "b" is negative, the compiler is within its
rights to optimize to a simple "if (1)", which might not be what you want.

This commit therefore converts synchronize_rcu_expedited()'s work-done
detection counter from signed to unsigned.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-23 07:41:56 -07:00
Paul E. McKenney 4cdfc175c2 rcu: Move quiescent-state forcing into kthread
As the first step towards allowing quiescent-state forcing to be
preemptible, this commit moves RCU quiescent-state forcing into the
same kthread that is now used to initialize and clean up after grace
periods.  This is yet another step towards keeping scheduling
latency down to a dull roar.

Updated to change from raw_spin_lock_irqsave() to raw_spin_lock_irq()
and to remove the now-unused rcu_state structure fields as suggested by
Peter Zijlstra.

Reported-by: Mike Galbraith <mgalbraith@suse.de>
Reported-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-09-23 07:41:54 -07:00
Paul E. McKenney b626c1b689 rcu: Provide OOM handler to motivate lazy RCU callbacks
In kernels built with CONFIG_RCU_FAST_NO_HZ=y, CPUs can accumulate a
large number of lazy callbacks, which as the name implies will be slow
to be invoked.  This can be a problem on small-memory systems, where the
default 6-second sleep for CPUs having only lazy RCU callbacks could well
be fatal.  This commit therefore installs an OOM hander that ensures that
every CPU with lazy callbacks has at least one non-lazy callback, in turn
ensuring timely advancement for these callbacks.

Updated to fix bug that disabled OOM killing, noted by Lai Jiangshan.

Updated to push the for_each_rcu_flavor() loop into rcu_oom_notify_cpu(),
thus reducing the number of IPIs, as suggested by Steven Rostedt.  Also
to make the for_each_online_cpu() loop be preemptible.  (Later, it might
be good to use smp_call_function(), as suggested by Peter Zijlstra.)

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-23 07:41:53 -07:00
Paul E. McKenney 62ab707247 rcu: Use smp_hotplug_thread facility for RCUs per-CPU kthread
Bring RCU into the new-age CPU-hotplug fold by modifying RCU's per-CPU
kthread code to use the new smp_hotplug_thread facility.

[ tglx: Adapted it to use callbacks and to the simplified rcu yield ]
    
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20120716103948.673354828@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-13 17:01:08 +02:00
Thomas Gleixner 5d01bbd111 rcu: Yield simpler
The rcu_yield() code is amazing. It's there to avoid starvation of the
system when lots of (boosting) work is to be done.

Now looking at the code it's functionality is:

 Make the thread SCHED_OTHER and very nice, i.e. get it out of the way
 Arm a timer with 2 ticks
 schedule()

Now if the system goes idle the rcu task returns, regains SCHED_FIFO
and plugs on. If the systems stays busy the timer fires and wakes a
per node kthread which in turn makes the per cpu thread SCHED_FIFO and
brings it back on the cpu. For the boosting thread the "make it FIFO"
bit is missing and it just runs some magic boost checks. Now this is a
lot of code with extra threads and complexity.

It's way simpler to let the tasks when they detect overload schedule
away for 2 ticks and defer the normal wakeup as long as they are in
yielded state and the cpu is not idle.

That solves the same problem and the only difference is that when the
cpu goes idle it's not guaranteed that the thread returns right away,
but it won't be longer out than two ticks, so no harm is done. If
that's an issue than it is way simpler just to wake the task from
idle as RCU has callbacks there anyway.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20120716103948.131256723@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-13 17:01:06 +02:00
Paul E. McKenney c701d5d9b3 rcu: Fix code-style issues involving "else"
The Linux kernel coding style says that single-statement blocks should
omit curly braces unless the other leg of the "if" statement has
multiple statements, in which case the curly braces should be included.
This commit fixes RCU's violations of this rule.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-07-06 06:01:48 -07:00
Paul E. McKenney 02a0677b0b Merge branches 'bigrtm.2012.07.04a', 'doctorture.2012.07.02a', 'fixes.2012.07.06a' and 'fnh.2012.07.02a' into HEAD
bigrtm: First steps towards getting RCU out of the way of
	tens-of-microseconds real-time response on systems compiled
	with NR_CPUS=4096.  Also cleanups for and increased concurrency
	of rcu_barrier() family of primitives.
doctorture: rcutorture and documentation improvements.
fixes:  Miscellaneous fixes.
fnh: RCU_FAST_NO_HZ fixes and improvements.
2012-07-06 05:59:30 -07:00
Paul E. McKenney 9d2ad24306 rcu: Make RCU_FAST_NO_HZ respect nohz= boot parameter
If the nohz= boot parameter disables nohz, then RCU_FAST_NO_HZ needs to
also disable itself.  This commit therefore checks for tick_nohz_enabled
being zero, disabling rcu_prepare_for_idle() if so.  This commit assumes
that tick_nohz_enabled can change at runtime: If this is not the case,
then a simpler approach suffices.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-07-02 12:34:43 -07:00
Paul E. McKenney e84c48ae30 rcu: Round FAST_NO_HZ lazy timeout to nearest second
Currently, if several CPUs in the same package have all lazy RCU
callbacks, their wakeups will be uncorrelated.  If all the CPUs are in the
same power domain (as is often the case), this will result in unnecessary
power-ups of the package.  This commit therefore uses round_jiffies()
to round the timeouts to a second boundary, increasing the odds that
they can be coalesced with each other or with other timeouts.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-07-02 12:34:42 -07:00
Carsten Emde 1c17e4d443 rcu: Prevent uninitialized string in RCU CPU stall info
An uninitialized string may be displayed at the end of the rcu_preempt
detected stall info such as

0: (1 GPs behind) idle=075/140000000000000/0 =8?^D=8?^D
                                             ^^^^^^^^^^
if CONFIG_RCU_FAST_NO_HZ is not defined.

This trivial patch clears the string in this case.

Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-07-02 12:34:25 -07:00
Paul E. McKenney 2a3fa843b5 rcu: Consolidate tree/tiny __rcu_read_{,un}lock() implementations
The CONFIG_TREE_PREEMPT_RCU and CONFIG_TINY_PREEMPT_RCU versions of
__rcu_read_lock() and __rcu_read_unlock() are identical, so this commit
consolidates them into kernel/rcupdate.h.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-07-02 12:34:23 -07:00
Paul E. McKenney 6ce75a2326 rcu: Introduce for_each_rcu_flavor() and use it
The arrival of TREE_PREEMPT_RCU some years back included some ugly
code involving either #ifdef or #ifdef'ed wrapper functions to iterate
over all non-SRCU flavors of RCU.  This commit therefore introduces
a for_each_rcu_flavor() iterator over the rcu_state structures for each
flavor of RCU to clean up a bit of the ugliness.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-07-02 12:33:24 -07:00
Paul E. McKenney 1bca8cf1a2 rcu: Remove unneeded __rcu_process_callbacks() argument
With the advent of __this_cpu_ptr(), it is no longer necessary to pass
both the rcu_state and rcu_data structures into __rcu_process_callbacks().
This commit therefore computes the rcu_data pointer from the rcu_state
pointer within __rcu_process_callbacks() so that callers can pass in
only the pointer to the rcu_state structure.  This paves the way for
linking the rcu_state structures together and iterating over them.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-07-02 12:33:23 -07:00
Paul E. McKenney 037b64ed0b rcu: Place pointer to call_rcu() in rcu_data structure
This is a preparatory commit for increasing rcu_barrier()'s concurrency.
It adds a pointer in the rcu_data structure to the corresponding call_rcu()
function.  This allows a pointer to the rcu_data structure to imply the
function pointer, which allows _rcu_barrier() state to be placed in the
rcu_state structure.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-07-02 12:33:21 -07:00
Paul E. McKenney cca6f39319 rcu: Size rcu_node tree from nr_cpu_ids rather than NR_CPUS
The rcu_node tree array is sized based on compile-time constants,
including NR_CPUS.  Although this approach has worked well in the past,
the recent trend by many distros to define NR_CPUS=4096 results in
excessive grace-period-initialization latencies.

This commit therefore substitutes the run-time computed nr_cpu_ids for
the compile-time NR_CPUS when building the tree.  This can result in
much of the compile-time-allocated rcu_node array being unused.  If
this is a major problem, you are in a specialized situation anyway,
so you can manually adjust the NR_CPUS, RCU_FANOUT, and RCU_FANOUT_LEAF
kernel config parameters.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-07-02 12:33:21 -07:00
Paul E. McKenney cc5df65b03 rcu: Four-level hierarchy is no longer experimental
Time to make the four-level-hierarchy setting less scary, so this
commit removes "Experimental" from the boot-time message.  Leave the
message in order to get a heads-up on any possible need to expand to
a five-level hierarchy.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-07-02 12:33:20 -07:00
Paul E. McKenney f885b7f2b2 rcu: Control RCU_FANOUT_LEAF from boot-time parameter
Although making RCU_FANOUT_LEAF a kernel configuration parameter rather
than a fixed constant makes it easier for people to decrease cache-miss
overhead for large systems, it is of little help for people who must
run a single pre-built kernel binary.

This commit therefore allows the value of RCU_FANOUT_LEAF to be
increased (but not decreased!) via a boot-time parameter named
rcutree.rcu_fanout_leaf.

Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-07-02 12:33:20 -07:00
Paul E. McKenney cba6d0d64e Revert "rcu: Move PREEMPT_RCU preemption to switch_to() invocation"
This reverts commit 616c310e83.
(Move PREEMPT_RCU preemption to switch_to() invocation).
Testing by Sasha Levin <levinsasha928@gmail.com> showed that this
can result in deadlock due to invoking the scheduler when one of
the runqueue locks is held.  Because this commit was simply a
performance optimization, revert it.

Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
2012-07-02 11:39:19 -07:00
Paul E. McKenney aa9b16306e rcu: Precompute RCU_FAST_NO_HZ timer offsets
When a CPU is entering dyntick-idle mode, tick_nohz_stop_sched_tick()
calls rcu_needs_cpu() see if RCU needs that CPU, and, if not, computes the
next wakeup time based on the timer wheels.  Only later, when actually
entering the idle loop, rcu_prepare_for_idle() will be invoked.  In some
cases, rcu_prepare_for_idle() will post timers to wake the CPU back up.
But all for naught: The next wakeup time for the CPU has already been
computed, and posting a timer afterwards does not force that wakeup
time to be recomputed.  This means that rcu_prepare_for_idle()'s have
no effect.

This is not a problem on a busy system because something else will wake
up the CPU soon enough.  However, on lightly loaded systems, the CPU
might stay asleep for a considerable length of time.  If that CPU has
a callback that the rest of the system is waiting on, the system might
run very slowly or (in theory) even hang.

This commit avoids this problem by having rcu_needs_cpu() give
tick_nohz_stop_sched_tick() an estimate of when RCU will need the CPU
to wake back up, which tick_nohz_stop_sched_tick() takes into account
when programming the CPU's wakeup time.  An alternative approach is
for rcu_prepare_for_idle() to use hrtimers instead of normal timers,
but timers are much more efficient than are hrtimers for frequently
and repeatedly posting and cancelling a given timer, which is exactly
what RCU_FAST_NO_HZ does.

Reported-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
2012-06-06 20:43:28 -07:00
Paul E. McKenney 5955f7eecd rcu: Move RCU_FAST_NO_HZ per-CPU variables to rcu_dynticks structure
The RCU_FAST_NO_HZ code relies on a number of per-CPU variables.
This works, but is hidden from someone scanning the data structures
in rcutree.h.  This commit therefore converts these per-CPU variables
to fields in the per-CPU rcu_dynticks structures.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
2012-06-06 20:43:28 -07:00
Paul E. McKenney fd4b352687 rcu: Update RCU_FAST_NO_HZ tracing for lazy callbacks
In the current code, a short dyntick-idle interval (where there is
at least one non-lazy callback on the CPU) and a long dyntick-idle
interval (where there are only lazy callbacks on the CPU) are traced
identically, which can be less than helpful.  This commit therefore
emits different event traces in these two cases.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
2012-06-06 20:43:27 -07:00
Paul E. McKenney dc36be4419 Merge branches 'barrier.2012.05.09a', 'fixes.2012.04.26a', 'inline.2012.05.02b' and 'srcu.2012.05.07b' into HEAD
barrier:  Reduce the amount of disturbance by rcu_barrier() to the rest of
    	the system.  This branch also includes improvements to
    	RCU_FAST_NO_HZ, which are included here due to conflicts.
fixes:  Miscellaneous fixes.
inline:  Remaining changes from an abortive attempt to inline
    	preemptible RCU's __rcu_read_lock().  These are (1) making
    	exit_rcu() avoid unnecessary work and (2) avoiding having
    	preemptible RCU record a blocked thread when the scheduler
    	declines to do a context switch.
srcu:	Lai Jiangshan's algorithmic implementation of SRCU, including
    	call_srcu().
2012-05-11 10:14:21 -07:00
Paul E. McKenney 98248a0e24 rcu: Explicitly initialize RCU_FAST_NO_HZ per-CPU variables
The current initialization of the RCU_FAST_NO_HZ per-CPU variables makes
needless and fragile assumptions about the initial value of things like
the jiffies counter.  This commit therefore explicitly initializes all of
them that are better started with a non-zero value.  It also adds some
comments describing the per-CPU state variables.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-05-09 14:26:57 -07:00
Paul E. McKenney 21e52e1566 rcu: Make RCU_FAST_NO_HZ handle timer migration
The current RCU_FAST_NO_HZ assumes that timers do not migrate unless a
CPU goes offline, in which case it assumes that the CPU will have to come
out of dyntick-idle mode (cancelling the timer) in order to go offline.
This is important because when RCU_FAST_NO_HZ permits a CPU to enter
dyntick-idle mode despite having RCU callbacks pending, it posts a timer
on that CPU to force a wakeup on that CPU.  This wakeup ensures that the
CPU will eventually handle the end of the grace period, including invoking
its RCU callbacks.

However, Pascal Chapperon's test setup shows that the timer handler
rcu_idle_gp_timer_func() really does get invoked in some cases.  This is
problematic because this can cause the CPU that entered dyntick-idle
mode despite still having RCU callbacks pending to remain in
dyntick-idle mode indefinitely, which means that its RCU callbacks might
never be invoked.  This situation can result in grace-period delays or
even system hangs, which matches Pascal's observations of slow boot-up
and shutdown (https://lkml.org/lkml/2012/4/5/142).  See also the bugzilla:

	https://bugzilla.redhat.com/show_bug.cgi?id=806548

This commit therefore causes the "should never be invoked" timer handler
rcu_idle_gp_timer_func() to use smp_call_function_single() to wake up
the CPU for which the timer was intended, allowing that CPU to invoke
its RCU callbacks in a timely manner.

Reported-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-05-09 14:26:56 -07:00
Paul E. McKenney 9dd8fb16c3 rcu: Make exit_rcu() more precise and consolidate
When running preemptible RCU, if a task exits in an RCU read-side
critical section having blocked within that same RCU read-side critical
section, the task must be removed from the list of tasks blocking a
grace period (perhaps the current grace period, perhaps the next grace
period, depending on timing).  The exit() path invokes exit_rcu() to
do this cleanup.

However, the current implementation of exit_rcu() needlessly does the
cleanup even if the task did not block within the current RCU read-side
critical section, which wastes time and needlessly increases the size
of the state space.  Fix this by only doing the cleanup if the current
task is actually on the list of tasks blocking some grace period.

While we are at it, consolidate the two identical exit_rcu() functions
into a single function.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>

Conflicts:

	kernel/rcupdate.c
2012-05-02 14:48:27 -07:00
Paul E. McKenney 616c310e83 rcu: Move PREEMPT_RCU preemption to switch_to() invocation
Currently, PREEMPT_RCU readers are enqueued upon entry to the scheduler.
This is inefficient because enqueuing is required only if there is a
context switch, and entry to the scheduler does not guarantee a context
switch.

The commit therefore moves the enqueuing to immediately precede the
call to switch_to() from the scheduler.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-02 14:43:23 -07:00
Paul E. McKenney f511fc6246 rcu: Ensure that RCU_FAST_NO_HZ timers expire on correct CPU
Timers are subject to migration, which can lead to the following
system-hang scenario when CONFIG_RCU_FAST_NO_HZ=y:

1.	CPU 0 executes synchronize_rcu(), which posts an RCU callback.

2.	CPU 0 then goes idle.  It cannot immediately invoke the callback,
	but there is nothing RCU needs from ti, so it enters dyntick-idle
	mode after posting a timer.

3.	The timer gets migrated to CPU 1.

4.	CPU 0 never wakes up, so the synchronize_rcu() never returns, so
	the system hangs.

This commit fixes this problem by using mod_timer_pinned(), as suggested
by Peter Zijlstra, to ensure that the timer is actually posted on the
running CPU.

Reported-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-05-01 08:22:50 -07:00
Paul E. McKenney 79b9a75fb7 rcu: Add warning for RCU_FAST_NO_HZ timer firing
RCU_FAST_NO_HZ uses a timer to limit the time that a CPU with callbacks
can remain in dyntick-idle mode.  This timer is cancelled when the CPU
exits idle, and therefore should never fire.  However, if the timer
were migrated to some other CPU for whatever reason (1) the timer could
actually fire and (2) firing on some other CPU would fail to wake up the
CPU with callbacks, possibly resulting in sluggishness or a system hang.

This commit therfore adds a WARN_ON_ONCE() to the timer handler in order
to detect this condition.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-04-26 08:49:05 -07:00
Paul E. McKenney c57afe80db rcu: Make RCU_FAST_NO_HZ account for pauses out of idle
Both Steven Rostedt's new idle-capable trace macros and the RCU_NONIDLE()
macro can cause RCU to momentarily pause out of idle without the rest
of the system being involved.  This can cause rcu_prepare_for_idle()
to run through its state machine too quickly, which can in turn result
in needless scheduling-clock interrupts.

This commit therefore adds code to enable rcu_prepare_for_idle() to
distinguish between an initial entry to idle on the one hand (which needs
to advance the rcu_prepare_for_idle() state machine) and an idle reentry
due to idle-capable trace macros and RCU_NONIDLE() on the other hand
(which should avoid advancing the rcu_prepare_for_idle() state machine).
Additional state is maintained to allow the timer to be correctly reposted
when returning after a momentary pause out of idle, and even more state
is maintained to detect when new non-lazy callbacks have been enqueued
(which may require re-evaluation of the approach to idleness).

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-04-24 20:55:20 -07:00
Paul E. McKenney 2ee3dc8066 rcu: Make RCU_FAST_NO_HZ use timer rather than hrtimer
The RCU_FAST_NO_HZ facility uses an hrtimer to wake up a CPU when
it is allowed to go into dyntick-idle mode, which is almost always
cancelled soon after.  This is not what hrtimers are good at, so
this commit switches to the timer wheel.

Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-04-24 20:55:19 -07:00
Paul E. McKenney 2fdbb31b66 rcu: Add RCU_FAST_NO_HZ tracing for idle exit
Traces of rcu_prep_idle events can be confusing because
rcu_cleanup_after_idle() does no tracing.  This commit therefore adds
this tracing.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-04-24 20:55:19 -07:00