Commit Graph

5825 Commits

Author SHA1 Message Date
Linus Torvalds cf7ad04300 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: allow alignment fault mode to be configured at kernel boot
  ARM: Update mach-types
  ARM: 5951/1: ARM: fix documentation of the PrimeCell bus
  ARM: 5950/1: ARM: Fix build error for arm1026ej-s processor
  MAINTAINERS: fix my e-mail and status for Gemini and FA526
  Gemini: wrong registers used to set reg_level in gpio_set_irq_type()
  ARM: 5944/1: scsi: fix timer setup in fas216.c
  ARM: 5938/1: ARM: L2: export outer_cache_fns
2010-02-20 16:55:05 -08:00
Tomas Henzl b3dc1a212e [SCSI] megaraid_sas: fix for 32bit apps
It looks like this patch -

commit 7b2519afa1
Author: Yang, Bo <Bo.Yang@lsi.com>
Date:   Tue Oct 6 14:52:20 2009 -0600

    [SCSI] megaraid_sas: fix 64 bit sense pointer truncation

has caused a problem for 32bit programs with 64bit os -

http://bugzilla.kernel.org/show_bug.cgi?id=15001

fix by converting the user space 32bit pointer to a 64 bit one when
needed.

[jejb: fix up some 64 bit warnings]
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Cc: Bo Yang <Bo.Yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-19 15:11:53 -06:00
Guennadi Liakhovetski b857df1acc ARM: 5944/1: scsi: fix timer setup in fas216.c
mod_timer() takes an absolute time and not a delay as its argument.

Cc: <stable@kernel.org>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-18 17:24:21 +00:00
Rob Love 6409ea65b3 [SCSI] fcoe: Only rmmod fcoe.ko if there are no active connections
Currently we're gracefully tearing down each active connection
when fcoe.ko is removed. We shouldn't allow the user to destroy
connections by removing the module. We should force the user to
destroy each connection and then the module can be removed.

This patch makes it so a refrerence count on the module is taken
each time a fcoe_interface is created. The reference count
is dropped when the fcoe_interface is destroyed. This makes it
so that module_exit() doesn't get called unless all fcoe_interfaces
have been destroyed.

This patch leaves the removal of interfaces in the module_exit
routine so that if the user does a 'rmmod -f' we'll clean everything
up before removing the module.

The module_put line was put before the out_putdev goto line because
we should only be decrementing the reference count if a
fcoe_interface is actually destroyed. If we can't find the netdev
or the fcoe_interface then it's assumed that something else has
destroyed the fcoe_interface and it would have decremented the
reference count at that time.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 09:57:05 -06:00
Bhanu Prakash Gollapudi f47dd855d9 [SCSI] libfcoe: Send port LKA every FIP_VN_KA_PERIOD secs.
libfcoe module doesnt send port keep alive every
FIP_VN_KA_PERIOD due to improper assignment of timeout value.
Update the port_ka_time appropriately by incrementing it by
FIP_VN_KA_PERIOD in fcoe_ctlr_timeout(), so that the link_work
is scheduled to send the port LKA.

Signed-off-by: Bhanu Gollapudi <bprakash@broadcom.com>
Acked-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 09:57:03 -06:00
Hugh Daschbach b248df30fc [SCSI] libfc: Don't assume response request present.
Fix NULL pointer dereference crash occurs in fc_lport_bsg_request()
for bsg requests that do not contain a response request.
Specifically, FC_BSG_HST_ADD_RPORT and FC_BSG_HST_DEL_RPORT bsg
requests are not guaranteed to include a response request.

Signed-off-by: Hugh Daschbach <hdasch@broadcom.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 09:57:01 -06:00
Hugh Daschbach 3b709150b7 [SCSI] libfc: Fix e_d_tov ns -> ms scaling factor in PLOGI response.
Both PLOGI and RTV response processing conditionally scale e_d_tov,
but use different scaling factors.  The scaling factor is correct in
RTV response processing.  Bring PLOGI e_d_tov scaling in line with RTV
common service parameter inspection.

Signed-off-by: Hugh Daschbach <hdasch@broadcom.com>
Acked-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 09:56:59 -06:00
Vasu Dev 10897ae71d [SCSI] libfc: call ddp setup for only FCP reads to avoid accessing junk fsp pointer
Adds check to call fc_fcp_ddp_setup for only FCP read cmds to avoid
accessing junk fsp pointer at least in ESX since non FCP frame had
junk fsp value, though fsp is implicitly initialized to null
by __alloc_skb but with this patch no more relying on fsp
initialized to null value and hitting junk fsp ptr access.

Removes fsp pointer checking in fc_fcp_ddp_setup as this is not
needed any more since its only caller for FCP read will always
have a valid fsp.

Reported by: Frank Zhang <frank_1.zhang@intel.com>
Reported by: Rob Love <robert.w.love@intel.com>
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 09:56:57 -06:00
Mike Christie fee099b278 [SCSI] iscsi_tcp regression: remove bogus warn on in write path
An empty r2tqueue is a valid state. It just means that we have
processed all that there was to do. This patch removes the WARN_ON
that was added when the kfifo changes were merged.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 09:55:22 -06:00
Anirban Chakraborty a67093d46e [SCSI] qla2xxx: Obtain proper host structure during response-queue processing.
Original code incorrectly assumed only status-type-0
IOCBs would be queued to the response-queue, and thus all
entries would safely reference a VHA from the IOCB
'handle.'

Cc: stable@kernel.org
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08 13:45:55 -06:00
Xiaotian Feng 0f19bc681e [SCSI] qla2xxx: make msix interrupt handler safe for irq
Yinghai has reported a lockdep warning on qla2xxx:

[   77.965784] WARNING: at kernel/lockdep.c:2332
trace_hardirqs_on_caller+0xc6/0x14b()
[   77.977492] Hardware name: Sun
[   77.979485] Modules linked in:
[   77.994337] Pid: 0, comm: swapper Not tainted
2.6.33-rc4-tip-yh-03949-g3a8e3f5-dirty #64
[   78.000120] Call Trace:
[   78.013298]  <IRQ>  [<ffffffff81076b54>] warn_slowpath_common+0x7c/0x94
[   78.017746]  [<ffffffff81cd712c>] ? _raw_spin_unlock_irq+0x30/0x36
[   78.035171]  [<ffffffff81076b80>] warn_slowpath_null+0x14/0x16
[   78.040152]  [<ffffffff810a2ae8>] trace_hardirqs_on_caller+0xc6/0x14b
[   78.055400]  [<ffffffff810a2b7a>] trace_hardirqs_on+0xd/0xf
[   78.058951]  [<ffffffff81cd712c>] _raw_spin_unlock_irq+0x30/0x36
[   78.074889]  [<ffffffff816461ef>] qla24xx_msix_default+0x243/0x281
[   78.091598]  [<ffffffff810a5752>] ? __lock_release+0xa5/0xae
[   78.096799]  [<ffffffff810c02ae>] handle_IRQ_event+0x53/0x113
[   78.111568]  [<ffffffff810c2061>] handle_edge_irq+0xf3/0x13b
[   78.116255]  [<ffffffff81035109>] handle_irq+0x24/0x2f
[   78.132063]  [<ffffffff81cdc4b4>] do_IRQ+0x5c/0xc3
[   78.134684]  [<ffffffff81cd7393>] ret_from_intr+0x0/0xf
[   78.137903]  <EOI>  [<ffffffff81039a56>] ? mwait_idle+0xaf/0xbb
[   78.155674]  [<ffffffff81039a4d>] ? mwait_idle+0xa6/0xbb
[   78.158600]  [<ffffffff81031c7c>] cpu_idle+0x61/0xa1
[   78.174333]  [<ffffffff81c85d7a>] rest_init+0x7e/0x80
[   78.178122]  [<ffffffff82832d1f>] start_kernel+0x316/0x31d
[   78.193623]  [<ffffffff82832297>] x86_64_start_reservations+0xa7/0xab
[   78.198924]  [<ffffffff8283237f>] x86_64_start_kernel+0xe4/0xeb
[   78.214540] ---[ end trace be4529f30a2e4ef5 ]---

This was happened when qla2xxx msix interrupt handler is trying to enable
IRQs by spin_unlock_irq(). We should make interrupt handler safe for IRQs,
use spin_lock_irqsave/spin_unlock_irqrestore, this will not break the IRQs
status in interrupt handler.

Reported-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Acked-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08 13:40:18 -06:00
Hannes Reinecke 534ef056db [SCSI] aic79xx: check for non-NULL scb in ahd_handle_nonpkt_busfree
When removing several devices aic79xx will occasionally Oops
in ahd_handle_nonpkt_busfree during rescan. Looking at the
code I found that we're indeed not checking if the scb in
question is NULL. So check for it before accessing it.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-17 12:48:12 -06:00
Swen Schillig b8f08645f8 [SCSI] scsi_transport_fc: Allow LLD to reset FC BSG timeout
The hardware used with zfcp cannot abort a currently pending CT or ELS
request. Therefore we need the option to postpone the timeout
triggered request abort within the fc layer, since there is nothing
zfcp can do to stop the request at this point.

Cc: James Smart <James.Smart@emulex.com>
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-17 12:40:11 -06:00
Giridhar Malavali 22c24734ce [SCSI] qla2xxx: Update version number to 8.03.01-k10.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-17 12:36:35 -06:00
Andrew Vasquez 368bbe0777 [SCSI] qla2xxx: Perform fast mailbox read of flash regardless of size nor address alignment.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-17 12:36:31 -06:00
Andrew Vasquez f08b7251c4 [SCSI] qla2xxx: Correct FCP2 recovery handling.
The driver did not account for non-tape devices needing to employ
proper FCP2 recovery.  Driver now checks the FCP2-capable flag
only, rather than using a midlayer-determined flag (TYPE_TAPE).

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-17 12:36:28 -06:00
Boaz Harrosh 63c43b0ec1 [SCSI] scsi_lib: Fix bug in completion of bidi commands
Because of the terrible structuring of scsi-bidi-commands
it breaks some of the life time rules of a scsi-command.
It is now not allowed to free up the block-request before
cleanup and partial deallocation of the scsi-command. (Which
is not so for none bidi commands)

The right fix to this problem would be to make bidi command
a first citizen by allocating a scsi_sdb pointer at scsi command
just like cmd->prot_sdb. The bidi sdb should be allocated/deallocated
as part of the get/put_command (Again like the prot_sdb) and the
current decoupling of scsi_cmnd and blk-request should be kept.

For now make sure scsi_release_buffers() is called before the
call to blk_end_request_all() which might cause the suicide of
the block requests. At best the leak of bidi buffers, at worse
a crash, as there is a race between the existence of the bidi_request
and the free of the associated bidi_sdb.

The reason this was never hit before is because only OSD has the potential
of doing asynchronous bidi commands. (So does bsg but it is never used)
And OSD clients just happen to do all their bidi commands synchronously, up
until recently.

CC: Stable Tree <stable@kernel.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-17 12:16:18 -06:00
Penchala Narasimha Reddy Chilakala, ERS-HCLTech cacb6dc3d7 [SCSI] aacraid: fix File System going into read-only mode
These particular problems were reported by Cisco and SAP and customers
as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and
SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build
to IBM and Cisco. Cisco and IBM tested it for more than 15 days and
they reported that they did not see the issue so far. Before the fix,
Cisco used to see the issue within 5 days. We generated a patch for
SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the
patch and gave a test build to SAP. SAP tested and reported that the
build is working properly.

We also tested in our lab using the tools "dishogsync", which is IO
stress tool and the tool was provided by Cisco.

Issue1:  File System going into read-only mode

Root cause: The driver tends to not free the memory (FIB) when the
management request exits prematurely. The accumulation of such
un-freed memory causes the driver to fail to allocate anymore memory
(FIB) and hence return 0x70000 value to the upper layer, which puts
the file system into read only mode.

Fix details: The fix makes sure to free the memory (FIB) even if the
request exits prematurely hence ensuring the driver wouldn't run out
of memory (FIBs).


Issue2: False Raid Alert occurs

When the Physical Drives and Logical drives are reported as deleted or
added, even though there is no change done on the system

Root cause: Driver IOCTLs is signaled with EINTR while waiting on
response from the lower layers. Returning "EINTR" will never initiate
internal retry.

Fix details: The issue was fixed by replacing "EINTR" with
"ERESTARTSYS" for mid-layer retries.

Signed-off-by: Penchala Narasimha Reddy <ServeRAIDDriver@hcl.in>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-17 12:16:17 -06:00
James Bottomley e6622df3bb [SCSI] lpfc: fix file permissions
lpfc_hbadisc.c and lpfc_hw4.h accidentally got set executable.

Reported-by: Thomas Backlund <tmb@mandriva.org>
Cc: James Smart <James.Smart@Emulex.Com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-17 12:14:03 -06:00
Bryn M. Reeves bb7d3f24c7 [SCSI] megaraid_sas: remove sysfs poll_mode_io world writeable permissions
/sys/bus/pci/drivers/megaraid_sas/poll_mode_io defaults to being
world-writable, which seems bad (letting any user affect kernel driver
behavior).

This turns off group and user write permissions, so that on typical
production systems only root can write to it.

Signed-off-by: Bryn M. Reeves <bmr@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-12 21:12:36 -08:00
James Smart 500af638b3 [SCSI] lpfc 8.3.7: Update Driver version to 8.3.7
Update Driver version to 8.3.7

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-04 11:39:47 -06:00
James Smart 9795724476 [SCSI] lpfc 8.3.7: Fix discovery failures.
Fix discovery failures:
- Move all accesses to the fc_flag field inside the host lock.
- Restore link state after going through linkdown processing for FCF DEAD event.

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-04 11:39:46 -06:00
James Smart aacc20e35e [SCSI] lpfc 8.3.7: Fix SCSI protocol related errors.
Fix SCSI protocol related errors:
- Avoid I/O failures during EEH and HBA/CNA reset by correcting when
  we block the targets on the adapter.

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-04 11:39:45 -06:00
James Smart def9c7a994 [SCSI] lpfc 8.3.7: Fix hardware/SLI relates issues
Fix hardware/SLI relates issues:
- Fix CNA uses more than one EQ when in INTx interrupt mode.
- Fix driver tries to process failed read FCF record mailbox request.
- Fix allocating single receive buffer breaks FCoE receive queue.
- Support new read FCF record mailbox error case.

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-04 11:39:44 -06:00
James Smart 1987807d4a [SCSI] lpfc 8.3.7: Fix NPIV operation errors
Fix NPIV operation errors:
- Fix vport not logging out of fabric when being deleted
- Fix vport fails to discover targets after devloss timeout.

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-04 11:39:43 -06:00
James Smart eeead81152 [SCSI] lpfc 8.3.7: Fix FC protocol errors
Fix FC protocol errors:
- Fix multi-frame unsolicited sequences not queued properly
- Fix frames for unsolicited sequences not being associated with sequence.
- Fix unsolicited frame buffer sizes are not set properly
- Fix Sequence count for unsolicited frame headers not byte swapped.
- Fix Multi-frame sequence response frames go to wrong DID.

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-04 11:39:42 -06:00
Ed Lin 91e6ecada7 [SCSI] stex: fix scan of nonexistent lun
During a manual scan, a user can send command to a nonexistent
lun, precisely at the point of max_lun. Normally it's possible
(but not required) that the firmware has the knowledge that it
is an invalid lun. In the particular case when max_lun is 256,
however, the nonexistent lun 256 will be confused with lun 0,
because the lun member in a request message is only u8, and 256
will become 0. So we need to fix the problem, at least, at the
driver level.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-04 11:39:41 -06:00
Anil Ravindranath a70757ba9a [SCSI] pmcraid: fix to avoid twice scsi_dma_unmap for a command
For a particular driver error condition, driver was doing double
scsi_dma_unmaps. Driver was calling scsi_dma_unmap in
pmcraid_error_handler and return 0. This pmcraid_error_handler is called
by pmcraid_io_done which will do scsi_dma_unmap again when it has
return 0 from pmcraid_error_handler.

Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-30 11:53:22 -06:00
Giridhar Malavali 3b9c212a5c [SCSI] qla2xxx: Update version number to 8.03.01-k9.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-30 11:09:53 -06:00
Duane Grigsby ca79cf6648 [SCSI] qla2xxx: Added to EEH support.
Added fundamental reset and pci save state.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-30 11:09:50 -06:00
Andrew Vasquez 8588080193 [SCSI] qla2xxx: Extend base EEH support in qla2xxx.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-30 11:09:49 -06:00
Anirban Chakraborty 5c66f5d193 [SCSI] qla2xxx: Fix for a multiqueue bug in CPU affinity mode
Hold the hardware lock while do the response completion in work queue threads as
it involves sharing a common request queue among multiple threads.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-30 11:09:47 -06:00
Michael Hernandez 3064ff39b8 [SCSI] qla2xxx: Get the link data rate explicitly during device resync.
When the hba port gets logged out of the fabric, or other
such transitional state when the physical link is still present,
the driver doesn't receive a loop up asyn event (where the link
data rate currently gets set). Hence send a explicit mailbox command
to get the link rate in such conditions.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-30 11:09:45 -06:00
Rakesh Ranjan 44214ab474 [SCSI] cxgb3i: Fix a login over vlan issue
Fix a target login issue, when parent interface is vlan and we are
using cxgb3i sepecific private ip address in '/etc/iscsi/ifaces/'
iface file.

Signed-off-by: Rakesh Ranjan <rakesh@chelsio.com>
Acked-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-30 11:03:41 -06:00
Stefani Seibold 9842c38e91 kfifo: fix warn_unused_result
Fix the "ignoring return value of '...', declared with attribute
warn_unused_result" compiler warning in several users of the new kfifo
API.

It removes the __must_check attribute from kfifo_in() and
kfifo_in_locked() which must not necessary performed.

Fix the allocation bug in the nozomi driver file, by moving out the
kfifo_alloc from the interrupt handler into the probe function.

Fix the kfifo_out() and kfifo_out_locked() users to handle a unexpected
end of fifo.

Signed-off-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22 14:17:56 -08:00
Stefani Seibold 7acd72eb85 kfifo: rename kfifo_put... into kfifo_in... and kfifo_get... into kfifo_out...
rename kfifo_put...  into kfifo_in...  to prevent miss use of old non in
kernel-tree drivers

ditto for kfifo_get...  -> kfifo_out...

Improve the prototypes of kfifo_in and kfifo_out to make the kerneldoc
annotations more readable.

Add mini "howto porting to the new API" in kfifo.h

Signed-off-by: Stefani Seibold <stefani@seibold.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22 14:17:56 -08:00
Stefani Seibold e64c026dd0 kfifo: cleanup namespace
change name of __kfifo_* functions to kfifo_*, because the prefix __kfifo
should be reserved for internal functions only.

Signed-off-by: Stefani Seibold <stefani@seibold.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22 14:17:56 -08:00
Stefani Seibold c1e13f2567 kfifo: move out spinlock
Move the pointer to the spinlock out of struct kfifo.  Most users in
tree do not actually use a spinlock, so the few exceptions now have to
call kfifo_{get,put}_locked, which takes an extra argument to a
spinlock.

Signed-off-by: Stefani Seibold <stefani@seibold.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22 14:17:56 -08:00
Stefani Seibold 4546548789 kfifo: move struct kfifo in place
This is a new generic kernel FIFO implementation.

The current kernel fifo API is not very widely used, because it has to
many constrains.  Only 17 files in the current 2.6.31-rc5 used it.
FIFO's are like list's a very basic thing and a kfifo API which handles
the most use case would save a lot of development time and memory
resources.

I think this are the reasons why kfifo is not in use:

 - The API is to simple, important functions are missing
 - A fifo can be only allocated dynamically
 - There is a requirement of a spinlock whether you need it or not
 - There is no support for data records inside a fifo

So I decided to extend the kfifo in a more generic way without blowing up
the API to much.  The new API has the following benefits:

 - Generic usage: For kernel internal use and/or device driver.
 - Provide an API for the most use case.
 - Slim API: The whole API provides 25 functions.
 - Linux style habit.
 - DECLARE_KFIFO, DEFINE_KFIFO and INIT_KFIFO Macros
 - Direct copy_to_user from the fifo and copy_from_user into the fifo.
 - The kfifo itself is an in place member of the using data structure, this save an
   indirection access and does not waste the kernel allocator.
 - Lockless access: if only one reader and one writer is active on the fifo,
   which is the common use case, no additional locking is necessary.
 - Remove spinlock - give the user the freedom of choice what kind of locking to use if
   one is required.
 - Ability to handle records. Three type of records are supported:
   - Variable length records between 0-255 bytes, with a record size
     field of 1 bytes.
   - Variable length records between 0-65535 bytes, with a record size
     field of 2 bytes.
   - Fixed size records, which no record size field.
 - Preserve memory resource.
 - Performance!
 - Easy to use!

This patch:

Since most users want to have the kfifo as part of another object,
reorganize the code to allow including struct kfifo in another data
structure.  This requires changing the kfifo_alloc and kfifo_init
prototypes so that we pass an existing kfifo pointer into them.  This
patch changes the implementation and all existing users.

[akpm@linux-foundation.org: fix warning]
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22 14:17:55 -08:00
Linus Torvalds 55db493b65 Merge branch 'cpumask-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* 'cpumask-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  cpumask: rename tsk_cpumask to tsk_cpus_allowed
  cpumask: don't recommend set_cpus_allowed hack in Documentation/cpu-hotplug.txt
  cpumask: avoid dereferencing struct cpumask
  cpumask: convert drivers/idle/i7300_idle.c to cpumask_var_t
  cpumask: use modern cpumask style in drivers/scsi/fcoe/fcoe.c
  cpumask: avoid deprecated function in mm/slab.c
  cpumask: use cpu_online in kernel/perf_event.c
2009-12-17 17:00:20 -08:00
Linus Torvalds fc6f0700d5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (40 commits)
  [SCSI] 3w-9xxx fix bug in sgl loading
  [SCSI] fcoe, libfc: adds enable/disable for fcoe interface
  [SCSI] libfc: reduce hold time on SCSI host lock
  [SCSI] libfc: remote port gets stuck in restart state without really restarting
  [SCSI] pm8001: misc code cleanup
  [SCSI] pm8001: enable read HBA SAS address from VPD
  [SCSI] pm8001: do not reset local sata as it will not be found if reset
  [SCSI] pm8001: bit set pm8001_ha->flags
  [SCSI] pm8001:fix potential NULL pointer dereference
  [SCSI] pm8001: set SSC down-spreading only to get less errors on some 6G device.
  [SCSI] pm8001: fix endian issues with SAS address
  [SCSI] pm8001: enhance error handle for IO patch
  [SCSI] pm8001: Fix for sata io circular lock dependency.
  [SCSI] hpsa: add driver for HP Smart Array controllers.
  [SCSI] cxgb3i: always use negative errno in case of error
  [SCSI] bnx2i: minor code cleanup and update driver version
  [SCSI] bnx2i: Task management ABORT TASK fixes
  [SCSI] bnx2i: update CQ arming algorith for 5771x chipsets
  [SCSI] bnx2i: Adjust sq_size module parametr to power of 2 only if a non-zero value is specified
  [SCSI] bnx2i: Add 5771E device support to bnx2i driver
  ...
2009-12-17 16:38:48 -08:00
Rusty Russell 6957177f5c cpumask: use modern cpumask style in drivers/scsi/fcoe/fcoe.c
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: "James E.J. Bottomley" <James.Bottomley@suse.de>
Cc: Robert Love <robert.w.love@intel.com>
Cc: Chris Leech <christopher.leech@intel.com>
Cc: linux-scsi@vger.kernel.org
2009-12-17 11:43:16 +10:30
KOSAKI Motohiro ca54cb8c9e Subject: Re: [PATCH] strstrip incorrectly marked __must_check
Recently, We marked strstrip() as must_check.  because it was frequently
misused and it should be checked.  However, we found one exception.
scsi/ipr.c intentionally ignore return value of strstrip.  Because it
wishes to keep the whitespace at the beginning.

Thus we need to keep with and without checked whitespace trim function.
This patch adds a new strim() and changes ipr.c to use it.

[akpm@linux-foundation.org: coding-style fixes]
Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:34 -08:00
Andrew Morton 4e62b09302 drivers/scsi/sym53c8xx_2/sym_glue.c: rename skip_spaces() to sym_skip_spaces()
To avoid a collision with the newly-added kernel-wide skip_spaces().

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:32 -08:00
adam radford 53ca353594 [SCSI] 3w-9xxx fix bug in sgl loading
This small patch fixes a bug in the 3w-9xxx driver where it would load
an invalid sgl address in the ioctl path even if request length was zero.

Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-12 16:45:23 -06:00
Vasu Dev 55a66d3c1e [SCSI] fcoe, libfc: adds enable/disable for fcoe interface
This is to allow fcoemon util to enable or disable a fcoe interface
according to DCB link state change.

Adds sysfs module param enable and disable for this and also
updates existing other module param description to be consistent
and more accurate since older description had double "fcoe" word
with less meaningful netdev reference to user space.

Adds code to ignore redundant fc_lport_enter_reset handling for a
already disabled fcoe interface by checking LPORT_ST_DISABLED
or LPORT_ST_LOGO states, this also prevents lport state transition
on link flap on a disabled interface.

Above changes required lport state transition to get out of
disabled or logo state on call to fc_fabric_login.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-12 16:30:34 -06:00
Chris Leech c1ecb90a66 [SCSI] libfc: reduce hold time on SCSI host lock
Introduce a new lock to protect the list of fc_fcp_pkt structs in libfc
instead of using the host lock.  This reduces the contention of this heavily
used lock, and I see up to a 25% performance gain in CPU bound small I/O
tests when scaling out across multiple quad-core CPUs.

The big win is in removing the host lock from the completion path
completely, as it does not need to be held around the call to scsi_done.

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-12 16:30:33 -06:00
Abhijeet Joglekar 5543c72e2b [SCSI] libfc: remote port gets stuck in restart state without really restarting
We ran into a scenario where a remote port goes into RESTART state, but
never gets added to scsi transport. The running vmcore showed the following:
a) Port was in RESTART state
b) rdata->event was STOP
c) no work gets scheduled for the remote work to fc_rport_work

After this point, shut/no-shut of the remote port did not cause the port
to get re-discovered. The port would move betwen DELETE and RESTART states,
but the event would always be STOP, no work would get scheduled to
fc_rport_work and the port would not get added to scsi_transport.

The problem is that rdata->event is not set to NONE after a port is
restarted. After this point, no more work gets scheduled for the remote port
since new work is scheduled only if rdata->event is non-NONE. So, the event
and state keep changing, but fc_rport_work does not get scheduled to actually
handle the event.

Here's a transition of states that explains the above observation:

) Port is first in READY State, event is NONE

2) RSCN on shut, port goes to DELETED, event is stop

3) Before fc_rport_work runs, RSCN on no-shut, port goes to RESTART, event is
still STOP

4) fc_rport_work gets scheduled, removes the port from transport, sees state
as RESTART, begins the PLOGI state machine, event remains as STOP (event NOT
changed to NONE, this is the bug)

5) Plogi state machine completes, port state goes to READY, event goes to
READY, but no work is scheduled since event was STOP (non-NONE) before.
Fc_rport_work is not scheduled, port remains in READY state, but is not added
to transport.

Things are broken at this point. Libfc rport is ready, but no transport rport
created.

6) now a shut causes port state to change to DELETE, event to change to STOP,
no work gets scheduled

7) no-shut causes port state to change to RESTART, event remains at STOP,
no work gets scheduled

(6) and (7) now get repeated everytime we do shut/no-shut. No way to get out
of this state. Fcc reset does not help too.

Only way to get out is to load/unload module.

Fix is to set rdata->event to NONE while processing the STOP/LOGO/FAILED
events, inside the discovery and rport locks.

Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-12 16:29:47 -06:00
jack wang 83e7332941 [SCSI] pm8001: misc code cleanup
Add more data to printk's, add some spaces around arithmetic ops and
improve comments.

Signed-off-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-10 10:10:56 -06:00
jack wang 7c8356d969 [SCSI] pm8001: enable read HBA SAS address from VPD
Signed-off-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-10 10:09:23 -06:00