Commit Graph

3341 Commits

Author SHA1 Message Date
Uwe Kleine-König b595076a18 tree-wide: fix comment/printk typos
"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-01 15:38:34 -04:00
Paul Mundt 37b7a97884 sh: machvec IO death.
This takes a bit of a sledgehammer to the machvec I/O routines. The
iomem case requires no special casing and so can just be dropped
outright. This only leaves the ioport casing for PCI and SuperIO
mangling. With the SuperIO case going through the standard ioport
mapping, it's possible to replace everything with generic routines.

With this done the standard I/O routines are tidied up and NO_IOPORT
now gets default-enabled for the vast majority of boards.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-01 09:49:04 -04:00
Linus Torvalds 706d4b12f8 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (215 commits)
  ARM: memblock: setup lowmem mappings using memblock
  ARM: memblock: move meminfo into find_limits directly
  ARM: memblock: convert free_highpages() to use memblock
  ARM: move freeing of highmem pages out of mem_init()
  ARM: memblock: convert memory detail printing to use memblock
  ARM: memblock: use memblock to free memory into arm_bootmem_init()
  ARM: memblock: use memblock when initializing memory allocators
  ARM: ensure membank array is always sorted
  ARM: 6466/1: implement flush_icache_all for the rest of the CPUs
  ARM: 6464/2: fix spinlock recursion in adjust_pte()
  ARM: fix memblock breakage
  ARM: 6465/1: Fix data abort accessing proc_info from __lookup_processor_type
  ARM: 6460/1: ixp2000: fix type of ixp2000_timer_interrupt
  ARM: 6449/1: Fix for compiler warning of uninitialized variable.
  ARM: 6445/1: fixup TCM memory types
  ARM: imx: Add wake functionality to GPIO
  ARM: mx5: Add gpio-keys to mx51 babbage board
  ARM: imx: Add gpio-keys to plat-mxc
  mx31_3ds: Fix spi registration
  mx31_3ds: Fix the logic for detecting the debug board
  ...
2010-10-30 08:26:25 -07:00
Paul Mundt e2781ac2a6 sh: mach-se: Rip out superfluous 7751 PIO routines.
MRSHPC is wholly unused here, no need to trap it specially. If support is
added in the future it can be taken care of via platform data like on the
others.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29 19:52:07 +09:00
Paul Mundt 1e789887f3 sh: mach-se: Rip out superfluous 770x PIO routines.
Platform data takes care of all of these these days, kill them off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29 19:48:21 +09:00
Paul Mundt c819cc7322 sh: mach-edosk7705: Kill off machtype, consolidate board def.
Trivial shuffling and tidying.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29 19:38:19 +09:00
Paul Mundt c1cfed3c3a sh: mach-edosk7705: update for this century, kill off PIO trapping.
The only reason this board needs to do PIO trapping is for ethernet,
which happens to follow the same scheme as its bigger brother the
edosk7760. With ethernet properly supported through the platform device,
we can kill off the left over PIO abortion.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29 19:34:13 +09:00
Paul Mundt db2d0373fd sh: mach-se: Rip out superfluous 7206 PIO routines.
The PIO trapping was only for MRSHPC and the SMC ethernet. Given that the
SMC ethernet is already properly handled and that nothing is using the
MRSHPC, none of this is needed.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29 19:24:59 +09:00
Paul Mundt 2504075d38 sh: mach-systemh: Kill off dead board.
This code has been untouched since it was merged many years ago, and has
severely bitrotted since, suggesting that the board has no real users
left. Notice of intent to remove has been sent out over the last few
years, with no takers. Kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29 19:11:56 +09:00
Paul Mundt f6eec8d664 sh: mach-snapgear: Kill off machtype, consolidate board def.
Only the secureedge5410 was ever supported by this code, so make the
board specification explicit rather than perpetuating a mach group.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29 19:06:53 +09:00
Paul Mundt 39c11984a4 sh: mach-snapgear: Rip out superfluous PIO routines.
None of these PIO routines do anything other than basic error checking,
get rid of them and use the generic fallbacks.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29 18:59:58 +09:00
Paul Mundt 46bc858720 sh: mach-microdev: SuperIO-relative ioport mapping.
The microdev only has to contend with silly PIO mangling on anything
within the SuperIO range. As each of the SuperIO modules is already
speciail cased, we just shift that logic over to the ioport map.

With microdev PCI never being merged (and being fudamentally broken in
hardware), and the ethernet chip only doing 16-bit accesses already,
there's no need to maintain any of the extra special casing. Kill it all
off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29 18:42:22 +09:00
Linus Torvalds 51399a3919 Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (38 commits)
  kbuild: convert `arch/tile' to the kconfig mainmenu upgrade
  README: cite nconfig
  Revert "kconfig: Temporarily disable dependency warnings"
  kconfig: Use PATH_MAX instead of 128 for path buffer sizes.
  kconfig: Fix realloc usage()
  kconfig: Propagate const
  kconfig: Don't go out from read config loop when you read new symbol
  kconfig: fix menuconfig on debian lenny
  kbuild: migrate all arch to the kconfig mainmenu upgrade
  kconfig: expand file names
  kconfig: use the file's name of sourced file
  kconfig: constify file name
  kconfig: don't emit warning upon rootmenu's prompt redefinition
  kconfig: replace KERNELVERSION usage by the mainmenu's prompt
  kconfig: delay gconf window initialization
  kconfig: expand by default the rootmenu's prompt
  kconfig: add a symbol string expansion helper
  kconfig: regen parser
  kconfig: implement the `mainmenu' directive
  kconfig: allow PACKAGE to be defined on the compiler's command-line
  ...

Fix up trivial conflict in arch/mn10300/Kconfig
2010-10-28 16:16:39 -07:00
Russell King b3773301c4 Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6 into devel-stable
Conflicts:
	drivers/video/sh_mobile_hdmi.c
2010-10-28 20:14:38 +01:00
Linus Torvalds 3c37629578 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (32 commits)
  sh: intc: switch irq_desc iteration to new active IRQ iterator.
  sh: fix up cpu hotplug IRQ migration for irq_data changes.
  sh: oprofile: Make sure the backtrace op is available for timer-fallback.
  sh64: oprofile: Fix up kernel stack pointer size mismatch.
  sh: oprofile: Fix up and extend op_name_from_perf_id().
  sh: lockless get_user_pages_fast()
  sh64: _PAGE_SPECIAL support.
  sound: sh: ctrl_in/outX to __raw_read/writeX conversion.
  sh: disable deprecated genirq support.
  sh: update show_interrupts() for irq_data chip lookup.
  sh: intc: irq_data conversion.
  sh64: irq_data conversion.
  sh64: update for IRQ flag handling naming changes.
  rtc: rtc-rs5c313: ctrl_in/outX to __raw_read/writeX conversion.
  sh: mach-se: irq_data conversion.
  input: hp680_ts_input: ctrl_in/outX to __raw_read/writeX conversion.
  input: jornada680_kbd: ctrl_in/outX to __raw_read/writeX conversion.
  sh: hd64461: irq_data conversion.
  sh: mach-x3proto: irq_data conversion.
  sh: mach-systemh: irq_data conversion.
  ...
2010-10-28 12:06:51 -07:00
Linus Torvalds 0851668fdd Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (505 commits)
  [media] af9015: Fix max I2C message size when used with tda18271
  [media] IR: initialize ir_raw_event in few more drivers
  [media] Guard a divide in v4l1 compat layer
  [media] imon: fix nomouse modprobe option
  [media] imon: remove redundant change_protocol call
  [media] imon: fix my egregious brown paper bag w/rdev/idev split
  [media] cafe_ccic: Configure ov7670 correctly
  [media] ov7670: allow configuration of image size, clock speed, and I/O method
  [media] af9015: support for DigitalNow TinyTwin v3 [1f4d:9016]
  [media] af9015: map DigitalNow TinyTwin v2 remote
  [media] DigitalNow TinyTwin remote controller
  [media] af9015: RC fixes and improvements
  videodev2.h.xml: Update to reflect the latest changes at videodev2.h
  [media] v4l: document new Bayer and monochrome pixel formats
  [media] DocBook/v4l: Add missing formats used on gspca cpia1 and sn9c2028
  [media] firedtv: add parameter to fake ca_system_ids in CA_INFO
  [media] tm6000: fix a macro coding style issue
  tm6000: Remove some ugly debug code
  [media] Nova-S-Plus audio line input
  [media] [RFC,1/1] V4L2: Use new CAP bits in existing RDS capable drivers
  ...
2010-10-28 09:35:11 -07:00
Paul Mundt fb41a49d96 sh: fix up cpu hotplug IRQ migration for irq_data changes.
This fixes up the __cpu_disable() path's IRQ migration for the
irq_data changes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-28 11:33:21 +09:00
Namhyung Kim 9e1cb20619 ptrace: cleanup arch_ptrace() on sh
Remove unnecessary castings and get rid of dummy pointer in favor of
offsetof() macro in ptrace_32.c. Also use temporary variables and
break long lines in order to improve readability.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:12 -07:00
Namhyung Kim 9b05a69e05 ptrace: change signature of arch_ptrace()
Fix up the arguments to arch_ptrace() to take account of the fact that
@addr and @data are now unsigned long rather than long as of a preceding
patch in this series.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:10 -07:00
Paul Mundt 7c842470f3 sh: oprofile: Make sure the backtrace op is available for timer-fallback.
Presently with hardware counter support disabled the backtrace op never
gets initialized. This is a regression over the previous behaviour, so
simply add it back in.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 17:03:50 +09:00
Paul Mundt d1ba71f764 sh64: oprofile: Fix up kernel stack pointer size mismatch.
For the backtrace code its assumed that the stack pointer is 32-bits,
which is not the case with the sh64 registers. Use the shared
kernel_stack_pointer() helper to get at the actual register, which
already takes care of the necessary typecasting.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 16:58:22 +09:00
Paul Mundt 2e4f17d230 sh: oprofile: Fix up and extend op_name_from_perf_id().
op_name_from_perf_id() currently returns a local variable, which isn't
terribly productive. As we only handle a single PMU case for now, simply
allocate and free the string from the arch init/exit context and have
op_name_from_perf_id() hand back the cached string.

This also takes UTS_MACHINE in to account, given that we build for
multiple architectures.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 16:51:33 +09:00
Paul Mundt 667b279baa sh: lockless get_user_pages_fast()
Implement get_user_pages_fast without locking in the fastpath on sh.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 16:43:08 +09:00
Paul Mundt a16382ce1c sh64: _PAGE_SPECIAL support.
Now that sh64 has grown extended page flag support we finally have a free
bit for _PAGE_SPECIAL. Wire it up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 16:40:19 +09:00
Paul Mundt 1e5cefd01a sh: disable deprecated genirq support.
Now that all of the controllers have been fixed up, we can finally select
GENERIC_HARDIRQS_NO_DEPRECATED.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 15:44:19 +09:00
Paul Mundt faadfb04d9 sh: update show_interrupts() for irq_data chip lookup.
Presently the irq chip is found through the irq_desc, but as this is
going away convert over to an irq_data lookup instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 15:43:01 +09:00
Paul Mundt 815db1477a sh64: irq_data conversion.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 15:38:59 +09:00
Paul Mundt 31b37c73c5 sh64: update for IRQ flag handling naming changes.
irq_32.c was updated for the new API, while irq_64.c was overlooked. This
syncs them up and gets things building again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 15:34:51 +09:00
Paul Mundt 15ff2c67ab sh: mach-se: irq_data conversion.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 15:30:07 +09:00
Paul Mundt 19add7e116 sh: hd64461: irq_data conversion.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 15:18:15 +09:00
Paul Mundt 79c981283b sh: mach-x3proto: irq_data conversion.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 15:11:01 +09:00
Paul Mundt 5f01038473 sh: mach-systemh: irq_data conversion.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 15:09:31 +09:00
Paul Mundt 949bf16648 sh: imask IRQs irq_data conversion.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 14:54:50 +09:00
Paul Mundt d6138832ed sh: mach-microdev: irq_data conversion.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 14:54:10 +09:00
Paul Mundt 2803a1c681 sh: mach-landisk: irq_data conversion.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 14:53:01 +09:00
Paul Mundt 8df3a615da sh: IPR IRQs irq_data conversion.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 14:41:39 +09:00
Paul Mundt 0d338071f2 sh: mach-dreamcast: irq_data conversion.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 14:36:28 +09:00
Paul Mundt 9cc1cf380e sh: Fix the sparsemem disabled build.
The introduction of MAX_PHYSMEM_BITS in to the initial cpuinfo struct
causes a build error when sparsemem is disabled and asm/sparsemem.h is
not brought in by other means. Include it explicitly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 14:24:34 +09:00
Peter Zijlstra ece0e2b640 mm: remove pte_*map_nested()
Since we no longer need to provide KM_type, the whole pte_*map_nested()
API is now redundant, remove it.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:08 -07:00
Paul Mundt 38ab13441c sh: Switch dynamic IRQ creation to generic irq allocator.
Now that the genirq code provides an IRQ bitmap of its own and the
necessary API to manipulate it, there's no need to keep our own version
around anymore.

In the process we kill off some unused IRQ reservation code, with future
users now having to tie in to the genirq API as normal.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-26 16:05:08 +09:00
Paul Mundt 57b813303a sh: Tidy up genirq Kconfig bits.
Now that there's a HAVE_GENERIC_HARDIRQS, switch over.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-26 15:20:51 +09:00
Thomas Gleixner c4318baf00 sh: Sanitize sparse irq
Switch over to the new allocator functions.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-26 15:01:52 +09:00
Paul Mundt 2f98492c53 sh: Expose physical addressing mode through cpuinfo.
CPUs can be in either the legacy 29-bit or 32-bit physical addressing
modes. This follows the x86 approach of tracking the phys bits in cpuinfo
and exposing it to userspace through procfs.

This change was requested to permit kexec-tools to detect the physical
addressing mode in order to determine the appropriate address mangling.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-26 14:44:58 +09:00
Linus Torvalds 33081adf8b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (365 commits)
  ALSA: hda - Disable sticky PCM stream assignment for AD codecs
  ALSA: usb - Creative USB X-Fi volume knob support
  ALSA: ca0106: Use card specific dac id for mute controls.
  ALSA: ca0106: Allow different sound cards to use different SPI channel mappings.
  ALSA: ca0106: Create a nice spot for mapping channels to dacs.
  ALSA: ca0106: Move enabling of front dac out of hardcoded setup sequence.
  ALSA: ca0106: Pull out dac powering routine into separate function.
  ALSA: ca0106 - add Sound Blaster 5.1vx info.
  ASoC: tlv320dac33: Use usleep_range for delays
  ALSA: usb-audio: add Novation Launchpad support
  ALSA: hda - Add workarounds for CT-IBG controllers
  ALSA: hda - Fix wrong TLV mute bit for STAC/IDT codecs
  ASoC: tpa6130a2: Error handling for broken chip
  ASoC: max98088: Staticise m98088_eq_band
  ASoC: soc-core: Fix codec->name memory leak
  ALSA: hda - Apply ideapad quirk to Acer laptops with Cxt5066
  ALSA: hda - Add some workarounds for Creative IBG
  ALSA: hda - Fix wrong SPDIF NID assignment for CA0110
  ALSA: hda - Fix codec rename rules for ALC662-compatible codecs
  ALSA: hda - Add alc_init_jacks() call to other codecs
  ...
2010-10-25 08:32:05 -07:00
Linus Torvalds 1dfd166e93 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (110 commits)
  sh: i2c-sh7760: Replase from ctrl_* to __raw_*
  sh: clkfwk: Shuffle around to match the intc split up.
  sh: clkfwk: modify for_each_frequency end condition
  sh: fix clk_get() error handling
  sh: clkfwk: Fix fault in frequency iterator.
  sh: clkfwk: Add a helper for rate rounding by divisor ranges.
  sh: clkfwk: Abstract rate rounding helper.
  sh: clkfwk: support clock remapping.
  sh: pci: Convert to upper/lower_32_bits() helpers.
  sh: mach-sdk7786: Add support for the FPGA SRAM.
  sh: Provide a generic SRAM pool for tiny memories.
  sh: pci: Support secondary FPGA-driven PCIe clocks on SDK7786.
  sh: pci: Support slot 4 routing on SDK7786.
  sh: Fix up PMB locking.
  sh: mach-sdk7786: Add support for fpga gpios.
  sh: use pr_fmt for clock framework, too.
  sh: remove name and id from struct clk
  sh: free-without-alloc fix for sh_mobile_lcdcfb
  sh: perf: Set up perf_max_events.
  sh: perf: Support SH-X3 hardware counters.
  ...

Fix up trivial conflicts (perf_max_events got removed) in arch/sh/kernel/perf_event.c
2010-10-25 07:51:49 -07:00
Takashi Iwai aa5c14d5c0 Merge branch 'topic/asoc' into for-linus
Conflicts:
	arch/powerpc/platforms/85xx/p1022_ds.c
2010-10-25 10:00:30 +02:00
Laurent Pinchart 2001f99947 [media] soc_camera: Don't use module names to load I2C modules
With the v4l2_i2c_new_subdev* functions now supporting loading modules
based on modaliases, remove the module names hardcoded in platform data
and pass a NULL module name to those functions.

All corresponding I2C modules have been checked, and all of them include
a module aliases table with names corresponding to what the soc_camera
platform data uses.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-22 21:53:52 -02:00
Laurent Pinchart 2334e7902e [media] sh_vou: Don't use module names to load I2C modules
With the v4l2_i2c_new_subdev* functions now supporting loading modules
based on modaliases, remove the module names hardcoded in platform data
and pass a NULL module name to those functions.

All corresponding I2C modules have been checked, and all of them include
a module aliases table with names corresponding to what the sh_vou
platform data uses.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-22 21:53:33 -02:00
Linus Torvalds 092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
Linus Torvalds 3044100e58 Merge branch 'core-memblock-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-memblock-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (74 commits)
  x86-64: Only set max_pfn_mapped to 512 MiB if we enter via head_64.S
  xen: Cope with unmapped pages when initializing kernel pagetable
  memblock, bootmem: Round pfn properly for memory and reserved regions
  memblock: Annotate memblock functions with __init_memblock
  memblock: Allow memblock_init to be called early
  memblock/arm: Fix memblock_region_is_memory() typo
  x86, memblock: Remove __memblock_x86_find_in_range_size()
  memblock: Fix wraparound in find_region()
  x86-32, memblock: Make add_highpages honor early reserved ranges
  x86, memblock: Fix crashkernel allocation
  arm, memblock: Fix the sparsemem build
  memblock: Fix section mismatch warnings
  powerpc, memblock: Fix memblock API change fallout
  memblock, microblaze: Fix memblock API change fallout
  x86: Remove old bootmem code
  x86, memblock: Use memblock_memory_size()/memblock_free_memory_size() to get correct dma_reserve
  x86: Remove not used early_res code
  x86, memblock: Replace e820_/_early string with memblock_
  x86: Use memblock to replace early_res
  x86, memblock: Use memblock_debug to control debug message print out
  ...

Fix up trivial conflicts in arch/x86/kernel/setup.c and kernel/Makefile
2010-10-21 18:52:11 -07:00
Linus Torvalds e36f561a2c Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-irqflags
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-irqflags:
  Fix IRQ flag handling naming
  MIPS: Add missing #inclusions of <linux/irq.h>
  smc91x: Add missing #inclusion of <linux/irq.h>
  Drop a couple of unnecessary asm/system.h inclusions
  SH: Add missing consts to sys_execve() declaration
  Blackfin: Rename IRQ flags handling functions
  Blackfin: Add missing dep to asm/irqflags.h
  Blackfin: Rename DES PC2() symbol to avoid collision
  Blackfin: Split the BF532 BFIN_*_FIO_FLAG() functions to their own header
  Blackfin: Split PLL code from mach-specific cdef headers
2010-10-21 14:37:27 -07:00
Linus Torvalds 4a60cfa945 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (96 commits)
  apic, x86: Use BIOS settings for IBS and MCE threshold interrupt LVT offsets
  apic, x86: Check if EILVT APIC registers are available (AMD only)
  x86: ioapic: Call free_irte only if interrupt remapping enabled
  arm: Use ARCH_IRQ_INIT_FLAGS
  genirq, ARM: Fix boot on ARM platforms
  genirq: Fix CONFIG_GENIRQ_NO_DEPRECATED=y build
  x86: Switch sparse_irq allocations to GFP_KERNEL
  genirq: Switch sparse_irq allocator to GFP_KERNEL
  genirq: Make sparse_lock a mutex
  x86: lguest: Use new irq allocator
  genirq: Remove the now unused sparse irq leftovers
  genirq: Sanitize dynamic irq handling
  genirq: Remove arch_init_chip_data()
  x86: xen: Sanitise sparse_irq handling
  x86: Use sane enumeration
  x86: uv: Clean up the direct access to irq_desc
  x86: Make io_apic.c local functions static
  genirq: Remove irq_2_iommu
  x86: Speed up the irq_remapped check in hot pathes
  intr_remap: Simplify the code further
  ...

Fix up trivial conflicts in arch/x86/Kconfig
2010-10-21 14:11:46 -07:00
Ingo Molnar 14d4962dc8 Merge branch 'linus' into irq/core
Merge reason: update to almost-final-.36

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-20 04:38:59 +02:00
Peter Zijlstra e360adbe29 irq_work: Add generic hardirq context callbacks
Provide a mechanism that allows running code in IRQ context. It is
most useful for NMI code that needs to interact with the rest of the
system -- like wakeup a task to drain buffers.

Perf currently has such a mechanism, so extract that and provide it as
a generic feature, independent of perf so that others may also
benefit.

The IRQ context callback is generated through self-IPIs where
possible, or on architectures like powerpc the decrementer (the
built-in timer facility) is set to generate an interrupt immediately.

Architectures that don't have anything like this get to do with a
callback from the timer tick. These architectures can call
irq_work_run() at the tail of any IRQ handlers that might enqueue such
work (like the perf IRQ handler) to avoid undue latencies in
processing the work.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[ various fixes ]
Signed-off-by: Huang Ying <ying.huang@intel.com>
LKML-Reference: <1287036094.7768.291.camel@yhuang-dev>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-18 19:58:50 +02:00
Guennadi Liakhovetski 56ea510962 sh: fix clk_get() error handling
clk_get() returns an ERR_PTR(errno) on error and not NULL.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-18 20:33:10 +09:00
Arnd Bergmann 6038f373a3 llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-15 15:53:27 +02:00
Robert Richter 6268464b37 Merge remote branch 'tip/perf/core' into oprofile/core
Conflicts:
	arch/arm/oprofile/common.c
	kernel/perf_event.c
2010-10-15 12:45:00 +02:00
Paul Mundt a80be16805 sh: pci: Convert to upper/lower_32_bits() helpers.
Instead of hand-rolling our own, just use the generic ones instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-15 06:15:56 +09:00
Paul Mundt d8d6b902b8 sh: mach-sdk7786: Add support for the FPGA SRAM.
This ties in the 2KiB of FPGA SRAM in to the generic SRAM pool.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-15 02:13:04 +09:00
Paul Mundt c993487ec8 sh: Provide a generic SRAM pool for tiny memories.
This sets up a generic SRAM pool for CPUs and platform code to insert
their otherwise unused memories into. A simple alloc/free interface is
provided (lifed from avr32) for generic code.

This only applies to tiny SRAMs that are otherwise unmanaged, and does
not take in to account the more complex SRAMs sitting behind transfer
engines, or that employ an I/D split.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-15 02:09:00 +09:00
Paul Mundt b6b77b2d5f sh: pci: Support secondary FPGA-driven PCIe clocks on SDK7786.
The SDK7786 FPGA has secondary control over the PCIe clocks, specifically
relating to the slots and oscillator. This ties the FPGA clocks in to the
clock framework and balances the refcounting similar to how the primary
on-chip clocks are managed. While the on-chip clocks are per-port, the
FPGA clock enable/disable is global for the entire block.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-14 08:44:55 +09:00
Paul Mundt 61a46766c9 sh: pci: Support slot 4 routing on SDK7786.
SDK7786 supports connecting either slot3 or 4 to the same PCIe port by
way of FPGA muxing. By default the vertical slot 3 on the baseboard is
enabled, so this adds in a command line option for forcibly enabling the
slot 4 edge connector.

If nothing has been specified on the command line, we fall back to
reading the resistor values for card presence to figure out where to
route the port to.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-14 07:37:01 +09:00
Paul Mundt f7fcec93b6 sh: Fix up PMB locking.
This first converts the PMB locking over to raw spinlocks, and secondly
fixes up a nested locking issue that was triggering lockdep early on:

 swapper/0 is trying to acquire lock:
  (&pmbe->lock){......}, at: [<806be9bc>] pmb_init+0xf4/0x4dc

 but task is already holding lock:
  (&pmbe->lock){......}, at: [<806be98e>] pmb_init+0xc6/0x4dc

 other info that might help us debug this:
 1 lock held by swapper/0:
  #0:  (&pmbe->lock){......}, at: [<806be98e>] pmb_init+0xc6/0x4dc

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-14 03:49:15 +09:00
Paul Mundt 47da88f366 sh: mach-sdk7786: Add support for fpga gpios.
The sdk7786 FPGA supports a number of user settable input switches that
are otherwise unused. This wires up a dummy gpio chip for the switch bank
to simply expose them to userspace.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-14 03:04:44 +09:00
Paul Mundt 51c6c9bb34 sh: perf: Set up perf_max_events.
Presently this is uninitialized in the architecture code, so it's
artificlally capped to the default initialization value. Set it up at
registration time.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-13 17:52:14 +09:00
Yinghai Lu c7fc2de0c8 memblock, bootmem: Round pfn properly for memory and reserved regions
We need to round memory regions correctly -- specifically, we need to
round reserved region in the more expansive direction (lower limit
down, upper limit up) whereas usable memory regions need to be rounded
in the more restrictive direction (lower limit up, upper limit down).

This introduces two set of inlines:

	memblock_region_memory_base_pfn()
	memblock_region_memory_end_pfn()
	memblock_region_reserved_base_pfn()
	memblock_region_reserved_end_pfn()

Although they are antisymmetric (and therefore are technically
duplicates) the use of the different inlines explicitly documents the
programmer's intention.

The lack of proper rounding caused a bug on ARM, which was then found
to also affect other architectures.

Reported-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CB4CDFD.4020105@kernel.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-12 15:37:51 -07:00
Paul Mundt 5e5b3a9dc8 sh: perf: Support SH-X3 hardware counters.
The PMCAT location has conveniently moved on newer SH-X3 parts, special
case this for now with a note. This will probably want to be redone in a
less visually offensive way when/if more information becomes available.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-13 07:17:03 +09:00
Paul Mundt ace2dc7d12 sh: wire up perf alignment and emulation faults.
This plugs in the alignment and emulation fault reporting for perf sw
events.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-13 06:55:26 +09:00
Thomas Gleixner b683de2b3c genirq: Query arch for number of early descriptors
sparse irq sets up NR_IRQS_LEGACY irq descriptors and archs then go
ahead and allocate more.

Use the unused return value of arch_probe_nr_irqs() to let the
architecture return the number of early allocations. Fix up all users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12 16:39:08 +02:00
Michal Marek 239060b93b Merge branch 'kbuild/rc-fixes' into kbuild/kconfig
We need to revert the temporary hack in 71ebc01, hence the merge.
2010-10-12 15:09:06 +02:00
Matt Fleming 86c8c04792 sh: oprofile: Use perf-events oprofile backend
Now that we've got a generic perf-events based oprofile backend we might
as well make use of it seeing as SH doesn't do anything special with its
oprofile backend. Also introduce a new CONFIG_HW_PERF_EVENTS symbol so
that we can fallback to using the timer interrupt for oprofile if the
CPU doesn't support perf events.

Also, to avoid a section mismatch warning we need to annotate
oprofile_arch_exit() with an __exit marker.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-11 17:46:16 +02:00
Matt Fleming 84c7991059 perf: New helper function for pmu name
Introduce perf_pmu_name() helper function that returns the name of the
pmu. This gives us a generic way to get the name of a pmu regardless of
how an architecture identifies it internally.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-11 17:45:49 +02:00
Kulikov Vasiliy 5a30d7bfcd sh: boards/mach-x3proto: gpio: fix error handling code
Checks for (irq < 0) and (ilsel < 0) didn't make sense since they were
unsigned.  Made them signed.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-12 00:34:42 +09:00
Matt Fleming 3bf101ba42 perf: Add helper function to return number of counters
The number of counters for the registered pmu is needed in a few places
so provide a helper function that returns this number.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Tested-by: Will Deacon <will.deacon@arm.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-11 10:38:13 +02:00
Ingo Molnar 7cd2541cf2 Merge commit 'v2.6.36-rc7' into perf/core
Conflicts:
	arch/x86/kernel/module.c

Merge reason: Resolve the conflict, pick up fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-08 10:46:27 +02:00
Ingo Molnar 153db80f8c Merge commit 'v2.6.36-rc7' into core/memblock
Merge reason: Update from -rc3 to -rc7.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-08 09:15:00 +02:00
David Howells df9ee29270 Fix IRQ flag handling naming
Fix the IRQ flag handling naming.  In linux/irqflags.h under one configuration,
it maps:

	local_irq_enable() -> raw_local_irq_enable()
	local_irq_disable() -> raw_local_irq_disable()
	local_irq_save() -> raw_local_irq_save()
	...

and under the other configuration, it maps:

	raw_local_irq_enable() -> local_irq_enable()
	raw_local_irq_disable() -> local_irq_disable()
	raw_local_irq_save() -> local_irq_save()
	...

This is quite confusing.  There should be one set of names expected of the
arch, and this should be wrapped to give another set of names that are expected
by users of this facility.

Change this to have the arch provide:

	flags = arch_local_save_flags()
	flags = arch_local_irq_save()
	arch_local_irq_restore(flags)
	arch_local_irq_disable()
	arch_local_irq_enable()
	arch_irqs_disabled_flags(flags)
	arch_irqs_disabled()
	arch_safe_halt()

Then linux/irqflags.h wraps these to provide:

	raw_local_save_flags(flags)
	raw_local_irq_save(flags)
	raw_local_irq_restore(flags)
	raw_local_irq_disable()
	raw_local_irq_enable()
	raw_irqs_disabled_flags(flags)
	raw_irqs_disabled()
	raw_safe_halt()

with type checking on the flags 'arguments', and then wraps those to provide:

	local_save_flags(flags)
	local_irq_save(flags)
	local_irq_restore(flags)
	local_irq_disable()
	local_irq_enable()
	irqs_disabled_flags(flags)
	irqs_disabled()
	safe_halt()

with tracing included if enabled.

The arch functions can now all be inline functions rather than some of them
having to be macros.

Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300]
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile]
Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze]
Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM]
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR]
Acked-by: Tony Luck <tony.luck@intel.com> [IA-64]
Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R]
Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU]
Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS]
Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC]
Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390]
Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score]
Acked-by: Matt Fleming <matt@console-pimps.org> [SH]
Acked-by: David S. Miller <davem@davemloft.net> [Sparc]
Acked-by: Chris Zankel <chris@zankel.net> [Xtensa]
Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha]
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300]
Cc: starvik@axis.com [CRIS]
Cc: jesper.nilsson@axis.com [CRIS]
Cc: linux-cris-kernel@axis.com
2010-10-07 14:08:55 +01:00
David Howells d8b5fc0168 SH: Add missing consts to sys_execve() declaration
Add missing consts to the sys_execve() declaration which result in the
following error:

arch/sh/kernel/process_32.c:303: error: conflicting types for 'sys_execve'
/warthog/nfs/linux-2.6-fscache/arch/sh/include/asm/syscalls_32.h:24: error: previous declaration of 'sys_execve' was here

Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-07 14:08:52 +01:00
Paul Mundt 06c7a489a9 sh: Fix up the SH-3 build.
SH-3 lacks an MMUCR_TI definition for global TLB flushes. As SH-3 parts
lack a split TLB, the same global flush behaviour is accomplished
through the flush bit, which just happens to be the same as on SH-4.

This fixes up the build for all SH-3 MMU parts.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-07 02:57:39 +09:00
Guennadi Liakhovetski 46f12936fd sh: fix an ms7724se compile breakage
Fix a compile breakage, caused by my own careless copy-paste.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-06 20:24:21 +09:00
Nobuhiro Iwamatsu 901c28c257 sh: Fix address calculation of Initrd
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-06 16:53:28 +09:00
Akinobu Mita bde40898c8 sh: fix uninitialized spinlock
The spinlock in traps_64.c is used without initialization.
This fixes it by declaring DEFINE_SPINLOCK() and makes the spinlock static
variable.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-06 16:53:27 +09:00
Linus Torvalds 5336377d62 modules: Fix module_bug_list list corruption race
With all the recent module loading cleanups, we've minimized the code
that sits under module_mutex, fixing various deadlocks and making it
possible to do most of the module loading in parallel.

However, that whole conversion totally missed the rather obscure code
that adds a new module to the list for BUG() handling.  That code was
doubly obscure because (a) the code itself lives in lib/bugs.c (for
dubious reasons) and (b) it gets called from the architecture-specific
"module_finalize()" rather than from generic code.

Calling it from arch-specific code makes no sense what-so-ever to begin
with, and is now actively wrong since that code isn't protected by the
module loading lock any more.

So this commit moves the "module_bug_{finalize,cleanup}()" calls away
from the arch-specific code, and into the generic code - and in the
process protects it with the module_mutex so that the list operations
are now safe.

Future fixups:
 - move the module list handling code into kernel/module.c where it
   belongs.
 - get rid of 'module_bug_list' and just use the regular list of modules
   (called 'modules' - imagine that) that we already create and maintain
   for other reasons.

Reported-and-tested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Adrian Bunk <bunk@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-05 11:29:27 -07:00
Paul Mundt d91ddc2553 sh: Wire up INTC subgroup splitting for SH7786 SCIF1.
SH7786 is the big user for subgroup splitting, mostly for the PCIe block,
but those will follow later. For now we simply split up SCIF1, as used by
the serial console on SDK7786 and others.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-05 23:26:42 +09:00
Paul Mundt c1e30ad98f sh: intc: Support virtual mappings for IRQ subgroups.
Many interrupts that share a single mask source but are on different
hardware vectors will have an associated register tied to an INTEVT that
denotes the precise cause for the interrupt exception being triggered.

This introduces the concept of IRQ subgroups in the intc core, where
a virtual IRQ map is constructed for each of the pre-defined cause bits,
and a higher level chained handler takes control of the parent INTEVT.
This enables CPUs with heavily muxed IRQ vectors (especially across
disjoint blocks) to break things out in to a series of managed chained
handlers while being able to dynamically lookup and adopt the IRQs
created for them.

This is largely an opt-in interface, requiring CPUs to manually submit
IRQs for subgroup splitting, in addition to providing identifiers in
their enum maps that can be used for lazy lookup via the radix tree.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-05 04:47:03 +09:00
Paul Mundt 872f36a69f sh: Drop __initdata for SH-X3 pinmux tables.
The gpio sysfs support needs to get at these later, so drop the
__initdata annotations.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-04 05:00:19 +09:00
Paul Mundt 3bccf534f9 sh: mach-x3proto: Improve ILSEL debugging.
At the moment ILSEL blows up with a BUG when aliased sets are handed in,
but as the enable call is able to hand back errors we opt for that path
instead. None of the ILSEL peripherals are vital to the board's
operation, so trapping a BUG is a bit excessive.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-04 03:07:49 +09:00
Paul Mundt 2c237329f7 sh: mach-x3proto: gpio-keys support.
This adds gpio-keys mappings for the button matrix on the baseboard,
now that we have support for the pin controller.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-04 03:00:49 +09:00
Paul Mundt 550591143e sh: mach-x3proto: Support for baseboard GPIOs.
This adds trivial support for the GPIOs implemented through the baseboard
CPLD, used for driving the button matrix.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-04 02:59:29 +09:00
Paul Mundt d39d0ed196 sh: mach-x3proto: Move the ilsel header to a better place.
We'll be adding more headers for this board, so move this over to its own
directory.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-04 02:50:32 +09:00
Paul Mundt 532f3759d7 sh: Allow GPIO chips to register IRQ mappings.
As non-PFC chips are added that may support IRQs, pass through to the
generic helper instead of triggering the WARN_ON().

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-03 03:55:39 +09:00
Paul Mundt 4bacd796cc sh: Support early IRQ vector map reservation for delayed controllers.
Some controllers will need to be initialized lazily due to pinmux
constraints, while others may simply have no need to be brought online if
there are no backing devices for them attached. In this case it's still
necessary to be able to reserve their hardware vector map before dynamic
IRQs get a hold of them.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-02 22:02:07 +09:00
Paul Mundt 742759eae6 sh: Handle pinmux for SH-X3 proto IRQ/IRL modes.
The SH-X3 proto CPU has all of the external IRQ and IRL pins muxed, make
sure that we're able to grab them before attempting to register their
respective IRQ controllers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-02 19:43:40 +09:00
Paul Mundt 720a6bd785 sh: pinmux support for SH-X3 proto CPUs.
This adds in support for GPIO/pinmux on the SH-X3 proto CPUs. This will
subsequently be used by the x3proto board.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-02 19:20:51 +09:00
Paul Mundt f9d885c3e5 sh: Support IRQ balancing for SH-X3 proto cores, too.
This adds in hardware IRQ auto-distribution support for SH-X3 proto CPUs,
following the SH7786 support.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-02 01:04:30 +09:00
Paul Mundt e15f6870a2 sh: Support userimask for all SH-X3 interrupt controllers.
This shuffles some of the shared bits out of the 7786 code and in to a
shared SH-X3 support file. Presently just for userimask, but also a good
place for the IRQ balancing wrappers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-02 00:43:43 +09:00
Paul Mundt 5924ad0d86 sh: Update SH-X3 subtype for clkdev lookups.
Rewrite the SH-X3 proto CPU clock framework for clkdev.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-01 23:49:56 +09:00
Magnus Damm 68a1aed703 sh: boot kernel with SR.BL set
Update the SH kernel to keep SR.BL set until the VBR
register has been initialized. Useful to allow boot
of the kernel even though exceptions are pending.

Without this patch there is a window of time when
exceptions such as NMI are enabled but no exception
handlers are installed.

This patch modifies both the zImage loader and the
actual kernel to boot with BL=1, but the zImage
loader is modfied in such a way that the init_sr
value is unchanged to not break the zImage loader
provided by kexec.

Tested on sh7724 Ecovec and on the SH4AL-DSP core
included in sh7372.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-30 09:43:32 +09:00
Guennadi Liakhovetski 4c62c595c2 sh: fix a kfree address in clkdev code
kfree() in clkdev_drop() function should actually be called with an address of
a struct clk_lookup_alloc object, and not struct clk_lookup, as presently done.
This just happens to work, because "struct clk_lookup cl" is the first
member in struct clk_lookup_alloc.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-30 09:43:32 +09:00
Paul Mundt 3f224f4e05 sh: provide generic arch_debugfs_dir.
While sh previously had its own debugfs root, there now exists a
common arch_debugfs_dir prototype, so we switch everything over to
that.  Presumably once more architectures start making use of this
we'll be able to just kill off the stub kdebugfs wrapper.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-24 04:04:26 +09:00
matt mooney a234ca0faa sh: change to new flag variable
Replace EXTRA_CFLAGS with ccflags-y.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-23 16:18:18 +09:00
Paul Mundt 39a90865f0 sh: pci: Use a generic raw spinlock for PCI config access locking.
This copies the pci_config_lock idea from x86 over, allowing us to kill
off a couple of existing private locks. At the same time, these need to
be converted to raw spinlocks for -rt kernels, so we make that change at
the same time. This should make it easier for future parts to get the
locking right instead of inevitable ending up with lock type mismatches.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-20 18:56:13 +09:00
Paul Mundt c524ebf5a6 sh: pci: clock framework support for SH7786 PCIe.
This gets each port handling its MSTP bit, as well as moving the PHY
clock management in to the clock framework.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-20 18:45:11 +09:00
Paul Mundt cecf48e23f sh: pci: Use I/O accessors consistently in SH7786 PCIe init code.
Some of the existing code is flipping between __raw_xxx() and
pci_{read,write}_reg(). As the latter are just wrappers for the former,
flip over to using them consistently.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-20 17:10:02 +09:00
Paul Mundt bd792aea44 sh: pci: Support ports with disabled links on SH7786 PCIe.
Presently we error out if a link is disabled and simply drop the port
registration outright. This follows the PPC changes and simply reports on
the link state on boot, leaving the port registered, in order to more
easily deal with hotplug on future parts.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-20 16:12:58 +09:00
Paul Mundt beb54ad9c6 sh: pci: Discard initial PCICONF4/5 settings for SH7786 PCIe.
These settings are properly propagated by the hardware already, so
there's no need to bother with them manually.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-20 16:00:42 +09:00
Paul Mundt 2c65d75ec4 sh: pci: Support root complex config accesses on SH7786 PCIe.
The SH7786 PCIe is presently unable to enumerate itself in root complex
mode, and has no visibility through either type 0 or type 1 accesses,
despite having a mostly sensible extended config space for each port.
Attempts to generate type 0 or type 1 config cycles result in completer
aborts, so we're ultimately forced to use SuperHyway transactions
instead.

As each port has a single port <-> device mapping that resolves for any
PCI_SLOT definition, we simply hijack devfn 0 for the SuperHyway
transaction and bump up the devfn limit.

With enumeration of the root complex now possible, we also need to insert
an early fixup to hide the BARs from the kernel. With all of that done,
it's now possible to use the pcieport services with all of the PCIe
ports, which is the first step to power management support.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-20 15:39:54 +09:00
Paul Mundt cabdf8bf48 sh: pci: Move Renesas PCI IDs to a better place.
Previously these IDs were only used by one driver, so there was not much
need for having them generically defined. Now that this will no longer
hold true, move them over.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-20 15:37:25 +09:00
Arnaud Lacombe 838a2e55e6 kbuild: migrate all arch to the kconfig mainmenu upgrade
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>
2010-09-19 22:54:11 -04:00
Guennadi Liakhovetski 7d25d64441 sh: fix an SIU device name mismatch
Recent ASoC changes unified all PCM names, fix the platform code to match.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-19 16:04:31 +01:00
Paul Mundt 81df84f406 sh: pci: Give SH7786 PHY some time to settle.
The spec suggests waiting up to 500ms for the PHY to settle before
testing link state, but practice shows that 100ms is sufficient (this is
the delay value we also use on the other SH-4A PCI controllers, too).
This makes device detection much more reliable, although in the future it
should be a bit faster to simply serialize with a TLP IRQ.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-19 13:57:51 +09:00
Paul Mundt bdf7499081 sh: pci: Toggle configuration accesses on SH7786.
After configuration accesses have been completed deassert the
configuration access enable cleanly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-19 13:54:50 +09:00
Paul Mundt c62e3fae58 sh: pci: Use generic pci_enable_resources() for pcibios_enable_device().
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-19 13:51:15 +09:00
Arnd Bergmann d71415e884 sh: kill big kernel lock
The only BKL user in arch/sh protects a single bit,
so we can trivially replace it with test_and_set_bit.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-16 16:37:56 +09:00
Matt Fleming 64a48d9014 perf, sh: Fix patch merge foul-up
3f6da390 ("perf: Rework and fix the arch CPU-hotplug hooks") introduced
this breakage. sh_pmu_setup() is missing an opening curly brace.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100913191729.GA6440@console-pimps.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-15 10:43:59 +02:00
Paul Mundt 5d75b3a247 Revert "sh: ecovec24: modify tsc2007 platform settings"
According to Morimoto-san, this is no longer needed. Revert it.

This reverts commit e0009b0a44.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14 18:26:38 +09:00
Paul Mundt 51d149be0a sh: Provide a non-multiplexed sys_recvmmsg path.
Now that the rest of the socket calls are provided through their own
paths, do the same for sys_recvmmsg. It's unlikely we'll ever be able to
kill off the socketcall path, but this at least permits userspace to
gradually begin migrating.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14 17:43:11 +09:00
Carmelo AMOROSO 459ebb34bd sh: Add syscall entries for non multiplexed socket calls
Linux kernel already has socket syscalls that can be invoked
without the multiplexing sys_socketcall wrapper.
C library wrappers are ready to use them directly. It needs just
to define the missing syscall numbers and provide the related entries
into the syscalls table, like sh64 aleady does.

Signed-off-by: Francesco Rundo <francesco.rundo@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14 17:37:53 +09:00
Kuninori Morimoto e0009b0a44 sh: ecovec24: modify tsc2007 platform settings
This patch modify x_plate_ohms to correct value for tsc2007 panel,
and removed un-necessary ts_get_pendown_state()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14 17:35:57 +09:00
Matt Fleming 248bc0d93b sh: Set CONFIG_SYSFS_DEPRECATED_V2=n
As the help for the config option suggests, this option really shouldn't
be set by default for any recent distribution as it changes the layout
of sysfs. I spotted this while running debian when udev got very
confused by the sysfs layout and failed to create some device nodes.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14 17:35:52 +09:00
Guennadi Liakhovetski 44432407d9 fbdev: sh_mobile_lcdcfb: Support multiple video modes in platform data
This is a preparation for HDMI hotplug support. This patch just moves all
platform defined video modes for the sh_mobile_lcdcfb driver to separate
arrays and switches all users to use element 0 of that array, so, this patch
doesn't introduce any functional changes and as such should not cause any
regressions.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14 17:22:38 +09:00
Peter Zijlstra a4eaf7f146 perf: Rework the PMU methods
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.

The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.

This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).

It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).

The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:

 1) We disable the counter:
    a) the pmu has per-counter enable bits, we flip that
    b) we program a NOP event, preserving the counter state

 2) We store the counter state and ignore all read/overflow events

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-09 20:46:30 +02:00
Peter Zijlstra 33696fc0d1 perf: Per PMU disable
Changes perf_disable() into perf_pmu_disable().

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-09 20:46:29 +02:00
Peter Zijlstra 24cd7f54a0 perf: Reduce perf_disable() usage
Since the current perf_disable() usage is only an optimization,
remove it for now. This eases the removal of the __weak
hw_perf_enable() interface.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-09 20:46:29 +02:00
Peter Zijlstra b0a873ebbf perf: Register PMU implementations
Simple registration interface for struct pmu, this provides the
infrastructure for removing all the weak functions.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-09 20:46:28 +02:00
Peter Zijlstra 51b0fe3954 perf: Deconstify struct pmu
sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"`

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-09 20:46:27 +02:00
Paul Mundt 52204705b2 Merge branch 'sh/pci-express-integration' 2010-09-07 17:56:27 +09:00
Paul Mundt 1c3bb3871a sh: Hook up 3rd memory window for all SH7786 PCIe channels.
Now that the resource assignment issues are resolved, we can finally wire
up the small third memory window -- in the future we may reclaim this for
MSI.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-07 17:07:05 +09:00
Paul Mundt f048519309 sh: Properly wire up channel 2's I/O window on SH7786 PCIe.
An IORESOURCE_IO was missing here, which meant that we weren't properly
establishing the I/O window for this particular slot. With this
corrected, cards with I/O BARs have them actually assigned and
accessible.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-07 17:05:08 +09:00
Paul Mundt da03a63ac8 sh: Ignore 32-bit windows in 29-bit mode for SH7786 PCIe.
Certain memory windows are only available for 32-bit space, so skip over
these in 29-bit mode. This will severely restrict the amount of memory
that can be mapped, but since a boot loader bug makes booting in 29-bit
mode close to impossible anyways, everything is ok.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-07 17:03:10 +09:00
Paul Mundt 2c5f674339 sh: Establish a SuperHyway<->PCIe window mapping on SH7786 PCIe.
This bumps up the low address to match the physical memory windows for
SHway<->PCIe transfers. The previous implementation was banking on a 1:1
virt<->phys SHway mapping, which doesn't apply here.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-07 16:12:26 +09:00
Paul Mundt 2dbfa1e37d sh: Make SH7786 PCIe port reset logic more aggressive.
This attempts a more complete port reset, building on top of the existing
approach.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-07 16:11:04 +09:00
Matt Fleming 9ec1651668 sh: Additional register definitions for SH7786 PCIe.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-07 16:09:14 +09:00
Ingo Molnar daab7fc734 Merge commit 'v2.6.36-rc3' into x86/memblock
Conflicts:
	arch/x86/kernel/trampoline.c
	mm/memblock.c

Merge reason: Resolve the conflicts, update to latest upstream.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-31 09:45:46 +02:00
Ingo Molnar 7de5d895b2 Merge branch 'linus' into perf/core
Merge reason: pick up perf fixes

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-25 13:10:00 +02:00
Paul Mundt b9afa3e015 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:
	arch/sh/kernel/process_32.c

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-20 20:52:23 +09:00
Paul Mundt 144c749423 Merge branch 'sh/pci-express-integration' 2010-08-20 20:39:22 +09:00
Paul Mundt d2d5bc58d7 sh: sh2007/sh7757lcr defconfig reduction.
These were newly added while the defconfig reduction work was ongoing,
strip them down now.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-20 20:38:24 +09:00
Paul Mundt 65c23f54c0 sh: Relax devfn constraints for SH7786 PCIe.
SH7786 PCIe has 1 slot per port, but no specific restriction on function.
Relax the devfn restriction and look to the slot number instead when
configured as a root complex.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-20 20:26:41 +09:00
Paul Mundt 53178d71b9 sh: Fix up SH7786 PCIe PHY initialization.
This brings the clocking and register setting in line with the somewhat
factually ambiguous specification.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-20 16:04:59 +09:00
Paul Mundt 7656e2486c sh: Support type 1 accesses for SH7786 PCI.
This enables support for type 1 config space accesses on the SH7786
PCI controller. At the same time, add in some extra sanity checks for
controller asserted errors.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-20 15:59:40 +09:00
Ingo Molnar c8710ad389 Merge branch 'tip/perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core 2010-08-19 12:48:09 +02:00
Frederic Weisbecker f72c1a931e perf: Factorize callchain context handling
Store the kernel and user contexts from the generic layer instead
of archs, this gathers some repetitive code.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Borislav Petkov <bp@amd64.org>
2010-08-19 01:32:11 +02:00
Frederic Weisbecker 56962b4449 perf: Generalize some arch callchain code
- Most archs use one callchain buffer per cpu, except x86 that needs
  to deal with NMIs. Provide a default perf_callchain_buffer()
  implementation that x86 overrides.

- Centralize all the kernel/user regs handling and invoke new arch
  handlers from there: perf_callchain_user() / perf_callchain_kernel()
  That avoid all the user_mode(), current->mm checks and so...

- Invert some parameters in perf_callchain_*() helpers: entry to the
  left, regs to the right, following the traditional (dst, src).

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Borislav Petkov <bp@amd64.org>
2010-08-19 01:30:59 +02:00
Frederic Weisbecker 70791ce9ba perf: Generalize callchain_store()
callchain_store() is the same on every archs, inline it in
perf_event.h and rename it to perf_callchain_store() to avoid
any collision.

This removes repetitive code.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Borislav Petkov <bp@amd64.org>
2010-08-19 01:30:11 +02:00
Frederic Weisbecker c1a65932fd perf: Drop unappropriate tests on arch callchains
Drop the TASK_RUNNING test on user tasks for callchains as
this check doesn't seem to make any sense.

Also remove the tests for !current that is not supposed to
happen and current->pid as this should be handled at the
generic level, with exclude_idle attribute.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Borislav Petkov <bp@amd64.org>
2010-08-19 01:29:35 +02:00
David Howells d7627467b7 Make do_execve() take a const filename pointer
Make do_execve() take a const filename pointer so that kernel_execve() compiles
correctly on ARM:

arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type

This also requires the argv and envp arguments to be consted twice, once for
the pointer array and once for the strings the array points to.  This is
because do_execve() passes a pointer to the filename (now const) to
copy_strings_kernel().  A simpler alternative would be to cast the filename
pointer in do_execve() when it's passed to copy_strings_kernel().

do_execve() may not change any of the strings it is passed as part of the argv
or envp lists as they are some of them in .rodata, so marking these strings as
const should be fine.

Further kernel_execve() and sys_execve() need to be changed to match.

This has been test built on x86_64, frv, arm and mips.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-17 18:07:43 -07:00
Paul Mundt a8dc49b51a sh: stub __flush_tlb_global() definition for nommu.
This fixes up the nommu build with a stub definition for
__flush_tlb_global(), now used by the reboot code.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-16 14:53:01 +09:00
Paul Mundt d5b7fb7bb8 sh: fix up fallout from syscall arg constification.
sys_execve() now takes a const pointer, so reflect this change where the
syscall is actually defined, too. Fixes up a build error due to prototype
mismatch.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-16 14:52:06 +09:00
Paul Mundt 3e497df14d sh: wire up fanotify/prlimit64 syscalls.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-16 13:51:18 +09:00