Commit Graph

12 Commits

Author SHA1 Message Date
Venkat Yekkirala 4237c75c0a [MLSXFRM]: Auto-labeling of child sockets
This automatically labels the TCP, Unix stream, and dccp child sockets
as well as openreqs to be at the same MLS level as the peer. This will
result in the selection of appropriately labeled IPSec Security
Associations.

This also uses the sock's sid (as opposed to the isec sid) in SELinux
enforcement of secmark in rcv_skb and postroute_last hooks.

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 14:53:29 -07:00
Venkat Yekkirala cb969f072b [MLSXFRM]: Default labeling of socket specific IPSec policies
This defaults the label of socket-specific IPSec policies to be the
same as the socket they are set on.

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 14:53:28 -07:00
Venkat Yekkirala beb8d13bed [MLSXFRM]: Add flow labeling
This labels the flows that could utilize IPSec xfrms at the points the
flows are defined so that IPSec policy and SAs at the right label can
be used.

The following protos are currently not handled, but they should
continue to be able to use single-labeled IPSec like they currently
do.

ipmr
ip_gre
ipip
igmp
sit
sctp
ip6_tunnel (IPv6 over IPv6 tunnel device)
decnet

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 14:53:27 -07:00
Venkat Yekkirala e0d1caa7b0 [MLSXFRM]: Flow based matching of xfrm policy and state
This implements a seemless mechanism for xfrm policy selection and
state matching based on the flow sid. This also includes the necessary
SELinux enforcement pieces.

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 14:53:24 -07:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
James Morris 4e5ab4cb85 [SECMARK]: Add new packet controls to SELinux
Add new per-packet access controls to SELinux, replacing the old
packet controls.

Packets are labeled with the iptables SECMARK and CONNSECMARK targets,
then security policy for the packets is enforced with these controls.

To allow for a smooth transition to the new controls, the old code is
still present, but not active by default.  To restore previous
behavior, the old controls may be activated at runtime by writing a
'1' to /selinux/compat_net, and also via the kernel boot parameter
selinux_compat_net.  Switching between the network control models
requires the security load_policy permission.  The old controls will
probably eventually be removed and any continued use is discouraged.

With this patch, the new secmark controls for SElinux are disabled by
default, so existing behavior is entirely preserved, and the user is
not affected at all.

It also provides a config option to enable the secmark controls by
default (which can always be overridden at boot and runtime).  It is
also noted in the kconfig help that the user will need updated
userspace if enabling secmark controls for SELinux and that they'll
probably need the SECMARK and CONNMARK targets, and conntrack protocol
helpers, although such decisions are beyond the scope of kernel
configuration.

Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17 21:30:05 -07:00
Catherine Zhang c8c05a8eec [LSM-IPsec]: SELinux Authorize
This patch contains a fix for the previous patch that adds security
contexts to IPsec policies and security associations.  In the previous
patch, no authorization (besides the check for write permissions to
SAD and SPD) is required to delete IPsec policies and security
assocations with security contexts.  Thus a user authorized to change
SAD and SPD can bypass the IPsec policy authorization by simply
deleteing policies with security contexts.  To fix this security hole,
an additional authorization check is added for removing security
policies and security associations with security contexts.

Note that if no security context is supplied on add or present on
policy to be deleted, the SELinux module allows the change
unconditionally.  The hook is called on deletion when no context is
present, which we may want to change.  At present, I left it up to the
module.

LSM changes:

The patch adds two new LSM hooks: xfrm_policy_delete and
xfrm_state_delete.  The new hooks are necessary to authorize deletion
of IPsec policies that have security contexts.  The existing hooks
xfrm_policy_free and xfrm_state_free lack the context to do the
authorization, so I decided to split authorization of deletion and
memory management of security data, as is typical in the LSM
interface.

Use:

The new delete hooks are checked when xfrm_policy or xfrm_state are
deleted by either the xfrm_user interface (xfrm_get_policy,
xfrm_del_sa) or the pfkey interface (pfkey_spddelete, pfkey_delete).

SELinux changes:

The new policy_delete and state_delete functions are added.

Signed-off-by: Catherine Zhang <cxzhang@watson.ibm.com>
Signed-off-by: Trent Jaeger <tjaeger@cse.psu.edu>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17 21:29:45 -07:00
Dave Jones 6764472631 [SELINUX] Fix build after ipsec decap state changes.
security/selinux/xfrm.c: In function 'selinux_socket_getpeer_dgram':
    security/selinux/xfrm.c:284: error: 'struct sec_path' has no member named 'x'
    security/selinux/xfrm.c: In function 'selinux_xfrm_sock_rcv_skb':
    security/selinux/xfrm.c:317: error: 'struct sec_path' has no member named 'x'

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-09 12:35:53 -07:00
Catherine Zhang 2c7946a7bf [SECURITY]: TCP/UDP getpeersec
This patch implements an application of the LSM-IPSec networking
controls whereby an application can determine the label of the
security association its TCP or UDP sockets are currently connected to
via getsockopt and the auxiliary data mechanism of recvmsg.

Patch purpose:

This patch enables a security-aware application to retrieve the
security context of an IPSec security association a particular TCP or
UDP socket is using.  The application can then use this security
context to determine the security context for processing on behalf of
the peer at the other end of this connection.  In the case of UDP, the
security context is for each individual packet.  An example
application is the inetd daemon, which could be modified to start
daemons running at security contexts dependent on the remote client.

Patch design approach:

- Design for TCP
The patch enables the SELinux LSM to set the peer security context for
a socket based on the security context of the IPSec security
association.  The application may retrieve this context using
getsockopt.  When called, the kernel determines if the socket is a
connected (TCP_ESTABLISHED) TCP socket and, if so, uses the dst_entry
cache on the socket to retrieve the security associations.  If a
security association has a security context, the context string is
returned, as for UNIX domain sockets.

- Design for UDP
Unlike TCP, UDP is connectionless.  This requires a somewhat different
API to retrieve the peer security context.  With TCP, the peer
security context stays the same throughout the connection, thus it can
be retrieved at any time between when the connection is established
and when it is torn down.  With UDP, each read/write can have
different peer and thus the security context might change every time.
As a result the security context retrieval must be done TOGETHER with
the packet retrieval.

The solution is to build upon the existing Unix domain socket API for
retrieving user credentials.  Linux offers the API for obtaining user
credentials via ancillary messages (i.e., out of band/control messages
that are bundled together with a normal message).

Patch implementation details:

- Implementation for TCP
The security context can be retrieved by applications using getsockopt
with the existing SO_PEERSEC flag.  As an example (ignoring error
checking):

getsockopt(sockfd, SOL_SOCKET, SO_PEERSEC, optbuf, &optlen);
printf("Socket peer context is: %s\n", optbuf);

The SELinux function, selinux_socket_getpeersec, is extended to check
for labeled security associations for connected (TCP_ESTABLISHED ==
sk->sk_state) TCP sockets only.  If so, the socket has a dst_cache of
struct dst_entry values that may refer to security associations.  If
these have security associations with security contexts, the security
context is returned.

getsockopt returns a buffer that contains a security context string or
the buffer is unmodified.

- Implementation for UDP
To retrieve the security context, the application first indicates to
the kernel such desire by setting the IP_PASSSEC option via
getsockopt.  Then the application retrieves the security context using
the auxiliary data mechanism.

An example server application for UDP should look like this:

toggle = 1;
toggle_len = sizeof(toggle);

setsockopt(sockfd, SOL_IP, IP_PASSSEC, &toggle, &toggle_len);
recvmsg(sockfd, &msg_hdr, 0);
if (msg_hdr.msg_controllen > sizeof(struct cmsghdr)) {
    cmsg_hdr = CMSG_FIRSTHDR(&msg_hdr);
    if (cmsg_hdr->cmsg_len <= CMSG_LEN(sizeof(scontext)) &&
        cmsg_hdr->cmsg_level == SOL_IP &&
        cmsg_hdr->cmsg_type == SCM_SECURITY) {
        memcpy(&scontext, CMSG_DATA(cmsg_hdr), sizeof(scontext));
    }
}

ip_setsockopt is enhanced with a new socket option IP_PASSSEC to allow
a server socket to receive security context of the peer.  A new
ancillary message type SCM_SECURITY.

When the packet is received we get the security context from the
sec_path pointer which is contained in the sk_buff, and copy it to the
ancillary message space.  An additional LSM hook,
selinux_socket_getpeersec_udp, is defined to retrieve the security
context from the SELinux space.  The existing function,
selinux_socket_getpeersec does not suit our purpose, because the
security context is copied directly to user space, rather than to
kernel space.

Testing:

We have tested the patch by setting up TCP and UDP connections between
applications on two machines using the IPSec policies that result in
labeled security associations being built.  For TCP, we can then
extract the peer security context using getsockopt on either end.  For
UDP, the receiving end can retrieve the security context using the
auxiliary data mechanism of recvmsg.

Signed-off-by: Catherine Zhang <cxzhang@watson.ibm.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:41:23 -08:00
Luiz Capitulino ee2e6841b9 [XFRM]: Fix sparse warning.
security/selinux/xfrm.c:155:10: warning: Using plain integer as NULL pointer

Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-07 12:57:27 -08:00
Trent Jaeger 5f8ac64b15 [LSM-IPSec]: Corrections to LSM-IPSec Nethooks
This patch contains two corrections to the LSM-IPsec Nethooks patches
previously applied.  

(1) free a security context on a failed insert via xfrm_user 
interface in xfrm_add_policy.  Memory leak.

(2) change the authorization of the allocation of a security context
in a xfrm_policy or xfrm_state from both relabelfrom and relabelto 
to setcontext.

Signed-off-by: Trent Jaeger <tjaeger@cse.psu.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-06 13:22:39 -08:00
Trent Jaeger d28d1e0801 [LSM-IPSec]: Per-packet access control.
This patch series implements per packet access control via the
extension of the Linux Security Modules (LSM) interface by hooks in
the XFRM and pfkey subsystems that leverage IPSec security
associations to label packets.  Extensions to the SELinux LSM are
included that leverage the patch for this purpose.

This patch implements the changes necessary to the SELinux LSM to
create, deallocate, and use security contexts for policies
(xfrm_policy) and security associations (xfrm_state) that enable
control of a socket's ability to send and receive packets.

Patch purpose:

The patch is designed to enable the SELinux LSM to implement access
control on individual packets based on the strongly authenticated
IPSec security association.  Such access controls augment the existing
ones in SELinux based on network interface and IP address.  The former
are very coarse-grained, and the latter can be spoofed.  By using
IPSec, the SELinux can control access to remote hosts based on
cryptographic keys generated using the IPSec mechanism.  This enables
access control on a per-machine basis or per-application if the remote
machine is running the same mechanism and trusted to enforce the
access control policy.

Patch design approach:

The patch's main function is to authorize a socket's access to a IPSec
policy based on their security contexts.  Since the communication is
implemented by a security association, the patch ensures that the
security association's negotiated and used have the same security
context.  The patch enables allocation and deallocation of such
security contexts for policies and security associations.  It also
enables copying of the security context when policies are cloned.
Lastly, the patch ensures that packets that are sent without using a
IPSec security assocation with a security context are allowed to be
sent in that manner.

A presentation available at
www.selinux-symposium.org/2005/presentations/session2/2-3-jaeger.pdf
from the SELinux symposium describes the overall approach.

Patch implementation details:

The function which authorizes a socket to perform a requested
operation (send/receive) on a IPSec policy (xfrm_policy) is
selinux_xfrm_policy_lookup.  The Netfilter and rcv_skb hooks ensure
that if a IPSec SA with a securit y association has not been used,
then the socket is allowed to send or receive the packet,
respectively.

The patch implements SELinux function for allocating security contexts
when policies (xfrm_policy) are created via the pfkey or xfrm_user
interfaces via selinux_xfrm_policy_alloc.  When a security association
is built, SELinux allocates the security context designated by the
XFRM subsystem which is based on that of the authorized policy via
selinux_xfrm_state_alloc.

When a xfrm_policy is cloned, the security context of that policy, if
any, is copied to the clone via selinux_xfrm_policy_clone.

When a xfrm_policy or xfrm_state is freed, its security context, if
any is also freed at selinux_xfrm_policy_free or
selinux_xfrm_state_free.

Testing:

The SELinux authorization function is tested using ipsec-tools.  We
created policies and security associations with particular security
contexts and added SELinux access control policy entries to verify the
authorization decision.  We also made sure that packets for which no
security context was supplied (which either did or did not use
security associations) were authorized using an unlabelled context.

Signed-off-by: Trent Jaeger <tjaeger@cse.psu.edu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03 13:10:25 -08:00