Commit Graph

57 Commits

Author SHA1 Message Date
Bob Peterson aacee72061 GFS2: Reduce contention on gfs2_log_lock
This patch modifies functions gfs2_trans_add_meta and _data so that
they check whether the buffer_head is already in a transaction,
and if so, avoid taking the gfs2_log_lock.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-01-30 12:10:25 -05:00
Bob Peterson 192738b711 GFS2: Inline function meta_lo_add
This patch simply combines function meta_lo_add with its only
caller, trans_add_meta. This makes the code easier to read and
will make it easier to reduce contention on gfs2_log_lock.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-01-27 08:20:41 -05:00
Bob Peterson 9862ca056e GFS2: Switch tr_touched to flag in transaction
This patch eliminates the int variable tr_touched in favor of a
new flag in the transaction. This is a step toward reducing contention
on the gfs2_log_lock spin_lock.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-01-27 08:20:13 -05:00
Bob Peterson 491e94f790 gfs2: Add missing else in trans_add_meta/data
This patch fixes a timing window that causes a segfault.
The problem is that bd can remain NULL throughout the function
and then reference that NULL pointer if the bh->b_private starts
out NULL, then someone sets it to non-NULL inside the locking.
In that case, bd still needs to be set.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2015-10-01 12:00:59 -05:00
Bob Peterson 15562c439d GFS2: Move glock superblock pointer to field gl_name
What uniquely identifies a glock in the glock hash table is not
gl_name, but gl_name and its superblock pointer. This patch makes
the gl_name field correspond to a unique glock identifier. That will
allow us to simplify hashing with a future patch, since the hash
algorithm can then take the gl_name and hash its components in one
operation.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
2015-09-03 13:33:09 -05:00
Benjamin Marzinski 2e60d7683c GFS2: update freeze code to use freeze/thaw_super on all nodes
The current gfs2 freezing code is considerably more complicated than it
should be because it doesn't use the vfs freezing code on any node except
the one that begins the freeze.  This is because it needs to acquire a
cluster glock before calling the vfs code to prevent a deadlock, and
without the new freeze_super and thaw_super hooks, that was impossible. To
deal with the issue, gfs2 had to do some hacky locking tricks to make sure
that a frozen node couldn't be holding on a lock it needed to do the
unfreeze ioctl.

This patch makes use of the new hooks to simply the gfs2 locking code. Now,
all the nodes in the cluster freeze and thaw in exactly the same way. Every
node in the cluster caches the freeze glock in the shared state.  The new
freeze_super hook allows the freezing node to grab this freeze glock in
the exclusive state without first calling the vfs freeze_super function.
All the nodes in the cluster see this lock change, and call the vfs
freeze_super function. The vfs locking code guarantees that the nodes can't
get stuck holding the glocks necessary to unfreeze the system.  To
unfreeze, the freezing node uses the new thaw_super hook to drop the freeze
glock. Again, all the nodes notice this, reacquire the glock in shared mode
and call the vfs thaw_super function.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-11-17 10:36:39 +00:00
Fabian Frederick d29c0afe4d GFS2: use _RET_IP_ instead of (unsigned long)__builtin_return_address(0)
use macro definition

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-10-08 09:57:07 +01:00
Benjamin Marzinski 24972557b1 GFS2: remove transaction glock
GFS2 has a transaction glock, which must be grabbed for every
transaction, whose purpose is to deal with freezing the filesystem.
Aside from this involving a large amount of locking, it is very easy to
make the current fsfreeze code hang on unfreezing.

This patch rewrites how gfs2 handles freezing the filesystem. The
transaction glock is removed. In it's place is a freeze glock, which is
cached (but not held) in a shared state by every node in the cluster
when the filesystem is mounted. This lock only needs to be grabbed on
freezing, and actions which need to be safe from freezing, like
recovery.

When a node wants to freeze the filesystem, it grabs this glock
exclusively.  When the freeze glock state changes on the nodes (either
from shared to unlocked, or shared to exclusive), the filesystem does a
special log flush.  gfs2_log_flush() does all the work for flushing out
the and shutting down the incore log, and then it tries to grab the
freeze glock in a shared state again.  Since the filesystem is stuck in
gfs2_log_flush, no new transaction can start, and nothing can be written
to disk. Unfreezing the filesytem simply involes dropping the freeze
glock, allowing gfs2_log_flush() to grab and then release the shared
lock, so it is cached for next time.

However, in order for the unfreezing ioctl to occur, gfs2 needs to get a
shared lock on the filesystem root directory inode to check permissions.
If that glock has already been grabbed exclusively, fsfreeze will be
unable to get the shared lock and unfreeze the filesystem.

In order to allow the unfreeze, this patch makes gfs2 grab a shared lock
on the filesystem root directory during the freeze, and hold it until it
unfreezes the filesystem.  The functions which need to grab a shared
lock in order to allow the unfreeze ioctl to be issued now use the lock
grabbed by the freeze code instead.

The freeze and unfreeze code take care to make sure that this shared
lock will not be dropped while another process is using it.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-05-14 10:04:34 +01:00
Joe Perches d77d1b58aa GFS2: Use pr_<level> more consistently
Add pr_fmt, remove embedded "GFS2: " prefixes.
This now consistently emits lower case "gfs2: " for each message.

Other miscellanea around these changes:

o Add missing newlines
o Coalesce formats
o Realign arguments

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-07 09:30:51 +00:00
Fabian Frederick fc554ed3d8 GFS2: global conversion to pr_foo()
-All printk(KERN_foo converted to pr_foo().
-Messages updated to fit in 80 columns.
-fs_macros converted as well.
-fs_printk removed.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-06 17:34:06 +00:00
Steven Whitehouse 022ef4feed GFS2: Move log buffer accounting to transaction
Now we have a master transaction into which other transactions
are merged, the accounting can be done using this master
transaction. We no longer require the superblock fields which
were being used for this function.

In addition, this allows for a clean up in calc_reserved()
making it rather easier understand. Also, by reducing the
number of variables used to track the buffers being added
and removed from the journal, a number of error checks are
now no longer required.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-02-24 19:49:12 +00:00
Steven Whitehouse d69a3c6561 GFS2: Move log buffer lists into transaction
Over time, we hope to be able to improve the concurrency available
in the log code. This is one small step towards that, by moving
the buffer lists from the super block, and into the transaction
structure, so that each transaction builds its own buffer lists.

At transaction commit time, the buffer lists are merged into
the currently accumulating transaction. That transaction then
is passed into the before and after commit functions at journal
flush time. Thus there should be no change in overall behaviour
yet.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-02-24 16:54:54 +00:00
Steven Whitehouse 654a6d2f96 GFS2: Reduce struct gfs2_trans in size
A couple of "int" fields were being used as boolean values
so we can make them bitfields of one bit, and put them in
what might otherwise be a hole in the structure with 64
bit alignment.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-02-21 11:52:00 +00:00
Benjamin Marzinski 2b12eea656 GFS2: fix warning message
This patch fixes a warning message introduced in the recent
"GFS2: aggressively issue revokes in gfs2_log_flush" patch.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-06-19 21:29:19 +01:00
Benjamin Marzinski 5d054964f5 GFS2: aggressively issue revokes in gfs2_log_flush
This patch looks at all the outstanding blocks in all the transactions
on the log, and moves the completed ones to the ail2 list.  Then it
issues revokes for these blocks.  This will hopefully speed things up
in situations where there is a lot of contention for glocks, especially
if they are acquired serially.

revoke_lo_before_commit will issue at most one log block's full of these
preemptive revokes. The amount of reserved log space that
gfs2_log_reserve() ignores has been incremented to allow for this extra
block.

This patch also consolidates the common revoke instructions into one
function, gfs2_add_revoke().

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-06-19 09:41:59 +01:00
Linus Torvalds e72859b87f Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw
Pull GFS2 updates from Steven Whitehouse:
 "There is not a whole lot of change this time - there are some further
  changes which are in the works, but those will be held over until next
  time.

  Here there are some clean ups to inode creation, the addition of an
  origin (local or remote) indicator to glock demote requests, removal
  of one of the remaining GFP_NOFAIL allocations during log flushes, one
  minor clean up, and a one liner bug fix."

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
  GFS2: Flush work queue before clearing glock hash tables
  GFS2: Add origin indicator to glock demote tracing
  GFS2: Add origin indicator to glock callbacks
  GFS2: replace gfs2_ail structure with gfs2_trans
  GFS2: Remove vestigial parameter ip from function rs_deltree
  GFS2: Use gfs2_dinode_out() in the inode create path
  GFS2: Remove gfs2_refresh_inode from inode creation path
  GFS2: Clean up inode creation path
2013-04-30 11:27:14 -07:00
Joe Perches 7af584d3b0 gfs2: Convert print_symbol to %pSR
Use the new vsprintf extension to avoid any possible
message interleaving.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-29 15:23:20 +02:00
Benjamin Marzinski 16ca9412d8 GFS2: replace gfs2_ail structure with gfs2_trans
In order to allow transactions and log flushes to happen at the same
time, gfs2 needs to move the transaction accounting and active items
list code into the gfs2_trans structure.  As a first step toward this,
this patch removes the gfs2_ail structure, and handles the active items
list in the gfs_trans structure.  This keeps gfs2 from allocating an ail
structure on log flushes, and gives us a struture that can later be used
to store the transaction accounting outside of the gfs2 superblock
structure.

With this patch, at the end of a transaction, gfs2 will add the
gfs2_trans structure to the superblock if there is not one already.
This structure now has the active items fields that were previously in
gfs2_ail.  This is not necessary in the case where the transaction was
simply used to add revokes, since these are never written outside of the
journal, and thus, don't need an active items list.

Also, in order to make sure that the transaction structure is not
removed while it's still in use by gfs2_trans_end, unlocking the
sd_log_flush_lock has to happen slightly later in ending the
transaction.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-04-08 08:46:22 +01:00
Steven Whitehouse 4513899092 GFS2: Use ->writepages for ordered writes
Instead of using a list of buffers to write ahead of the journal
flush, this now uses a list of inodes and calls ->writepages
via filemap_fdatawrite() in order to achieve the same thing. For
most use cases this results in a shorter ordered write list,
as well as much larger i/os being issued.

The ordered write list is sorted by inode number before writing
in order to retain the disk block ordering between inodes as
per the previous code.

The previous ordered write code used to conflict in its assumptions
about how to write out the disk blocks with mpage_writepages()
so that with this updated version we can also use mpage_writepages()
for GFS2's ordered write, writepages implementation. So we will
also send larger i/os from writeback too.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-29 10:29:17 +00:00
Steven Whitehouse c76c4d96bd GFS2: Merge gfs2_attach_bufdata() into trans.c
The locking in gfs2_attach_bufdata() was type specific (data/meta)
which made the function rather confusing. This patch moves the core
of gfs2_attach_bufdata() into trans.c renaming it gfs2_alloc_bufdata()
and moving the locking into gfs2_trans_add_data()/gfs2_trans_add_meta()

As a result all of the locking related to adding data and metadata to
the journal is now in these two functions. This should help to clarify
what is going on, and give us some opportunities to simplify in
some cases.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-29 10:28:44 +00:00
Steven Whitehouse 767f433f34 GFS2: Copy gfs2_trans_add_bh into new data/meta functions
This patch copies the body of gfs2_trans_add_bh into the two newly
added gfs2_trans_add_data and gfs2_trans_add_meta functions. We can
then move the .lo_add functions from lops.c into trans.c and call
them directly.

As a result of this, we no longer need to use the .lo_add functions
at all, so that is removed from the log operations structure.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-29 10:28:28 +00:00
Steven Whitehouse 350a9b0a72 GFS2: Split gfs2_trans_add_bh() into two
There is little common content in gfs2_trans_add_bh() between the data
and meta classes by the time that the functions which it calls are
taken into account. The intent here is to split this into two
separate functions. Stage one is to introduce gfs2_trans_add_data()
and gfs2_trans_add_meta() and update the callers accordingly.

Later patches will then pull in the content of gfs2_trans_add_bh()
and its dependent functions in order to clean up the code in this
area.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-29 10:28:04 +00:00
Steven Whitehouse 75f2b879ae GFS2: Merge revoke adding functions
This moves the lo_add function for revokes into trans.c, removing
a function call and making the code easier to read.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-29 10:27:46 +00:00
Benjamin Marzinski 96e5d1d3ad GFS2: Test bufdata with buffer locked and gfs2_log_lock held
In gfs2_trans_add_bh(), gfs2 was testing if a there was a bd attached to the
buffer without having the gfs2_log_lock held. It was then assuming it would
stay attached for the rest of the function. However, without either the log
lock being held of the buffer locked, __gfs2_ail_flush() could detach bd at any
time.  This patch moves the locking before the test.  If there isn't a bd
already attached, gfs2 can safely allocate one and attach it before locking.
There is no way that the newly allocated bd could be on the ail list,
and thus no way for __gfs2_ail_flush() to detach it.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-11-07 09:43:03 +00:00
Jan Kara 39263d5e71 gfs2: Convert to new freezing mechanism
We update gfs2_page_mkwrite() to use new freeze protection and the transaction
code to use freeze protection while the transaction is running. That is needed
to stop iput() of unlinked file from modifying the filesystem. The rest is
handled by the generic code.

CC: cluster-devel@redhat.com
CC: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-31 09:45:50 +04:00
Bob Peterson c0752aa7e4 GFS2: eliminate log elements and simplify
This patch eliminates the gfs2_log_element data structure and
rolls its two components into the gfs2_bufdata. This makes the code
easier to understand and makes it easier to migrate to a rbtree
to keep the list sorted.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-05-02 09:14:36 +01:00
Steven Whitehouse c50b91c4bd GFS2: Remove bd_list_tr
This is another clean up in the logging code. This per-transaction
list was largely unused. Its main function was to ensure that the
number of buffers in a transaction was correct, however that counter
was only used to check the number of buffers in the bd_list_tr, plus
an assert at the end of each transaction. With the assert now changed
to use the calculated buffer counts, we can remove both bd_list_tr and
its associated counter.

This should make the code easier to understand as well as shrinking
a couple of structures.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-04-24 16:44:36 +01:00
Bob Peterson 7c9ca62113 GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme
Here is an update of Bob's original rbtree patch which, in addition, also
resolves the rather strange ref counting that was being done relating to
the bitmap blocks.

Originally we had a dual system for journaling resource groups. The metadata
blocks were journaled and also the rgrp itself was added to a list. The reason
for adding the rgrp to the list in the journal was so that the "repolish
clones" code could be run to update the free space, and potentially send any
discard requests when the log was flushed. This was done by comparing the
"cloned" bitmap with what had been written back on disk during the transaction
commit.

Due to this, there was a requirement to hang on to the rgrps' bitmap buffers
until the journal had been flushed. For that reason, there was a rather
complicated set up in the ->go_lock ->go_unlock functions for rgrps involving
both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference
count on the buffers.

However, the journal maintains a reference count on the buffers anyway, since
they are being journaled as metadata buffers. So by moving the code which deals
with the post-journal accounting for bitmap blocks to the metadata journaling
code, we can entirely dispense with the rather strange buffer ref counting
scheme and also the requirement to journal the rgrps.

The net result of all this is that the ->sd_rindex_spin is left to do exactly
one job, and that is to look after the rbtree or rgrps.

This patch is designed to be a stepping stone towards using RCU for the rbtree
of resource groups, however the reduction in the number of uses of the
->sd_rindex_spin is likely to have benefits for multi-threaded workloads,
anyway.

The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also
be removed in future in favour of calling the functions directly where required
in the code. That will allow locking of resource groups without needing to
actually read them in - something that could be useful in speeding up statfs.

In the mean time though it is valid to dereference ->bi_bh only when the rgrp
is locked. This is basically the same rule as before, modulo the references not
being valid until the following journal flush.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-10-21 12:39:31 +01:00
Benjamin Marzinski 5e687eac1b GFS2: Various gfs2_logd improvements
This patch contains various tweaks to how log flushes and active item writeback
work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits
for gfs2_logd to do the log flushing.  Multiple functions were rewritten to
remove the need to call gfs2_log_lock(). Instead of using one test to see if
gfs2_logd had work to do, there are now seperate tests to check if there
are two many buffers in the incore log or if there are two many items on the
active items list.

This patch is a port of a patch Steve Whitehouse wrote about a year ago, with
some minor changes.  Since gfs2_ail1_start always submits all the active items,
it no longer needs to keep track of the first ai submitted, so this has been
removed. In gfs2_log_reserve(), the order of the calls to
prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has
been switched.  If it called wake_up first there was a small window for a race,
where logd could run and return before gfs2_log_reserve was ready to get woken
up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve()
would be left waiting for gfs2_logd to eventualy run because it timed out.
Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times
out, and flushes the log, can now be set on mount with ar_commit.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-05 09:39:18 +01:00
Steven Whitehouse a1c0643ff9 GFS2: Move journal live test at transaction start
There seems little point grabbing the transaction glock
only to have to release it again if the journal isn't
live. This moves the test earlier to avoid grabbing the lock
when we don't need it in the first place.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-05-13 10:56:52 +01:00
Steven Whitehouse d8348de06f GFS2: Fix deadlock on journal flush
This patch fixes a deadlock when the journal is flushed and there
are dirty inodes other than the one which caused the journal flush.
Originally the journal flushing code was trying to obtain the
transaction glock while running the flush code for an inode glock.
We no longer require the transaction glock at this point in time
since we know that any attempt to get the transaction glock from
another node will result in a journal flush. So if we are flushing
the journal, we can be sure that the transaction lock is still
cached from when the transaction was started.

By inlining a version of gfs2_trans_begin() (minus the bit which
gets the transaction glock) we can avoid the deadlock problems
caused if there is a demote request queued up on the transaction
glock.

In addition I've also moved the umount rwsem so that it covers
the glock workqueue, since it all demotions are done by this
workqueue now. That fixes a bug on umount which I came across
while fixing the original problem.

Reported-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-03-24 11:21:18 +00:00
Steven Whitehouse f057f6cdf6 GFS2: Merge lock_dlm module into GFS2
This is the big patch that I've been working on for some time
now. There are many reasons for wanting to make this change
such as:
 o Reducing overhead by eliminating duplicated fields between structures
 o Simplifcation of the code (reduces the code size by a fair bit)
 o The locking interface is now the DLM interface itself as proposed
   some time ago.
 o Fewer lookups of glocks when processing replies from the DLM
 o Fewer memory allocations/deallocations for each glock
 o Scope to do further optimisations in the future (but this patch is
   more than big enough for now!)

Please note that (a) this patch relates to the lock_dlm module and
not the DLM itself, that is still a separate module; and (b) that
we retain the ability to build GFS2 as a standalone single node
filesystem with out requiring the DLM.

This patch needs a lot of testing, hence my keeping it I restarted
my -git tree after the last merge window. That way, this has the maximum
exposure before its merged. This is (modulo a few minor bug fixes) the
same patch that I've been posting on and off the the last three months
and its passed a number of different tests so far.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-03-24 11:21:14 +00:00
Steven Whitehouse 5731be53e3 [GFS2] Update gfs2_trans_add_unrevoke to accept extents
By adding an extra argument to gfs2_trans_add_unrevoke we can now
specify an extent length of blocks to unrevoke. This means that
we only need to make one pass through the list for each extent
rather than each block. Currently the only extent length which
is used is 1, but that will change in the future.

Also gfs2_trans_add_unrevoke is removed from gfs2_alloc_meta
since its the only difference between this and gfs2_alloc_data
which is left. This will allow a future patch to merge these
two functions into one (i.e. one call to allocate both data
and metadata in a single extent in the future).

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31 10:40:42 +01:00
Steven Whitehouse 2bcd610d2f [GFS2] Don't add glocks to the journal
The only reason for adding glocks to the journal was to keep track
of which locks required a log flush prior to release. We add a
flag to the glock to allow this check to be made in a simpler way.

This reduces the size of a glock (by 12 bytes on i386, 24 on x86_64)
and means that we can avoid extra work during the journal flush.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25 08:07:52 +00:00
Steven Whitehouse 1ad38c437f [GFS2] Clean up gfs2_trans_add_revoke()
The following alters gfs2_trans_add_revoke() to take a struct
gfs2_bufdata as an argument. This eliminates the memory allocation which
was previously required by making use of the already existing struct
gfs2_bufdata. It makes some sanity checks to ensure that the
gfs2_bufdata has been removed from all the lists before its recycled as
a revoke structure. This saves one memory allocation and one free per
revoke structure.

Also as a result, and to simplify the locking, since there is no longer
any blocking code in gfs2_trans_add_revoke() we must hold the log lock
whenever this function is called. This reduces the amount of times we
take and unlock the log lock.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10 08:56:12 +01:00
Steven Whitehouse 0820ab517e [GFS2] Use slab operations for all gfs2_bufdata allocations
The old revoke structure was allocated using kalloc/kfree but
there is a slab cache for gfs2_bufdata, so we should use that
now that the structures have been converted.

This is part two of the patch series to merge the revoke
and gfs2_bufdata structures.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10 08:56:10 +01:00
Steven Whitehouse 82e86087bb [GFS2] Replace revoke structure with bufdata structure
Both the revoke structure and the bufdata structure are quite similar.
They are basically small tags which are put on lists. In addition to
which the revoke structure is always allocated when there is a bufdata
structure which is (or can be) freed. As such it should be possible to
reduce the number of frees and allocations by using the same structure
for both purposes.

This patch is the first step along that path. It replaces existing uses
of the revoke structure with the bufdata structure.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10 08:56:07 +01:00
Fabio Massimo Di Nitto 7d308590ae [GFS2] Export lm_interface to kernel headers
lm_interface.h has a few out of the tree clients such as GFS1
and userland tools.

Right now, these clients keeps a copy of the file in their build tree
that can go out of sync.

Move lm_interface.h to include/linux, export it to userland and
clean up fs/gfs2 to use the new location.

Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-19 08:45:18 -04:00
Steven Whitehouse cd915493fc [GFS2] Change all types to uX style
This makes all fixed size types have consistent names.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-04 12:49:07 -04:00
Steven Whitehouse e9fc2aa091 [GFS2] Update copyright, tidy up incore.h
As per comments from Jan Engelhardt <jengelh@linux01.gwdg.de> this
updates the copyright message to say "version" in full rather than
"v.2". Also incore.h has been updated to remove forward structure
declarations which are not required.

The gfs2_quota_lvb structure has now had endianess annotations added
to it. Also quota.c has been updated so that we now store the
lvb data locally in endian independant format to avoid needing
a structure in host endianess too. As a result the endianess
conversions are done as required at various points and thus the
conversion routines in lvb.[ch] are no longer required. I've
moved the one remaining constant in lvb.h thats used into lm.h
and removed the unused lvb.[ch].

I have not changed the HIF_ constants. That is left to a later patch
which I hope will unify the gh_flags and gh_iflags fields of the
struct gfs2_holder.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-01 11:05:15 -04:00
Steven Whitehouse 3a8a9a1034 [GFS2] Update copyright date to 2006
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-05-18 15:09:15 -04:00
Steven Whitehouse bd8968010a [GFS2] Remove semaphore.h from C files
We no longer use semaphores, everything has been converted to
mutex or rwsem, so we don't need to include this header any more.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-05-18 14:54:58 -04:00
Steven Whitehouse 579b78a43b [GFS2] Remove GL_NEVER_RECURSE flag
There is no point in keeping this flag since recursion is not
now allowed for any glock.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-26 14:58:26 -04:00
Steven Whitehouse f4154ea039 [GFS2] Update journal accounting code.
A small update to the journaling code to change the way that
the "extra" blocks are accounted for in the journal. These are
used at a rate of one per 503 metadata blocks or one per 251
journaled data blocks (or just one if the total number of journaled
blocks in the transaction is smaller). Since we are using them at
two different rates the old method of accounting for them no longer
works and we count them up as required.

Since the "per transaction" accounting can't handle this (there is no
fixed number of header blocks per transaction) we have to account for
it in the general journal code. We now require that each transaction
reserves more blocks than it actually needs to take account of the
possible extra blocks.

Also a final fix to dir.c to ensure that all ref counts are handled
correctly.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-11 14:49:06 -04:00
Steven Whitehouse b09e593d79 [GFS2] Fix a ref count bug and other clean ups
This fixes a ref count bug that sometimes showed up a umount time
(causing it to hang) but it otherwise mostly harmless. At the same
time there are some clean ups including making the log operations
structures const, moving a memory allocation so that its not done
in the fast path of checking to see if there is an outstanding
transaction related to a particular glock.

Removes the sd_log_wrap varaible which was updated, but never actually
used anywhere. Updates the gfs2 ioctl() to run without the kernel lock
(which it never needed anyway). Removes the "invalidate inodes" loop
from GFS2's put_super routine. This is done in kill super anyway so
we don't need to do it here. The loop was also bogus in that if there
are any inodes "stuck" at this point its a bug and we need to know
about it rather than hide it by hanging forever.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-07 11:17:32 -04:00
Steven Whitehouse cd45697f0d [GFS2] Add missing {} in trans.c
A conditional had missing {} around the two following
statements. Now added.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-30 11:10:12 -05:00
Steven Whitehouse d0dc80dbaf [GFS2] Update debugging code
Update the debugging code in trans.c and at the same time improve
the debugging code for gfs2_holders. The new code should be pretty
fast during the normal case and provide just as much information
in case of errors (or more).

One small function from glock.c has moved to glock.h as a static inline so
that its return address won't get in the way of the debugging.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-29 14:36:49 -05:00
Steven Whitehouse 484adff8a0 [GFS2] Update locking in log.c
Replace the lock_for_trans()/lock_for_flush() functions with an rwsem.
In fact the sd_log_flush_lock becomes an rwsem (the write part of it)
and is extended slightly to cover everything that the lock_for_flush()
used to cover. The read part of the lock is instead of lock_for_trans().

This corrects the races in the original code and reduces the code size.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-29 09:12:12 -05:00
Steven Whitehouse b4dc72911d [GFS2] Fix some bugs
Fix a bug I introduced earlier with a kfree() and usage of
a structure in the wrong order. Also try and get the counts
of the journaled data buffers "more correct". Still some work
to do in this area though.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-01 17:41:58 -05:00
Steven Whitehouse e317ffcb7c [GFS2] Remove uneeded memory allocation
For every filesystem operation where we need a transaction, we
now make one less memory allocation.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-01 11:39:37 -05:00