Commit Graph

244 Commits

Author SHA1 Message Date
Jim Schutt 6d4221b537 libceph: avoid truncation due to racing banners
Because the Ceph client messenger uses a non-blocking connect, it is
possible for the sending of the client banner to race with the
arrival of the banner sent by the peer.

When ceph_sock_state_change() notices the connect has completed, it
schedules work to process the socket via con_work().  During this
time the peer is writing its banner, and arrival of the peer banner
races with con_work().

If con_work() calls try_read() before the peer banner arrives, there
is nothing for it to do, after which con_work() calls try_write() to
send the client's banner.  In this case Ceph's protocol negotiation
can complete succesfully.

The server-side messenger immediately sends its banner and addresses
after accepting a connect request, *before* actually attempting to
read or verify the banner from the client.  As a result, it is
possible for the banner from the server to arrive before con_work()
calls try_read().  If that happens, try_read() will read the banner
and prepare protocol negotiation info via prepare_write_connect().
prepare_write_connect() calls con_out_kvec_reset(), which discards
the as-yet-unsent client banner.  Next, con_work() calls
try_write(), which sends the protocol negotiation info rather than
the banner that the peer is expecting.

The result is that the peer sees an invalid banner, and the client
reports "negotiation failed".

Fix this by moving con_out_kvec_reset() out of
prepare_write_connect() to its callers at all locations except the
one where the banner might still need to be sent.

[elder@inktak.com: added note about server-side behavior]

Signed-off-by: Jim Schutt <jaschut@sandia.gov>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-08-21 15:55:27 -07:00
Sage Weil d1c338a509 libceph: delay debugfs initialization until we learn global_id
The debugfs directory includes the cluster fsid and our unique global_id.
We need to delay the initialization of the debug entry until we have
learned both the fsid and our global_id from the monitor or else the
second client can't create its debugfs entry and will fail (and multiple
client instances aren't properly reflected in debugfs).

Reported by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-08-20 10:03:15 -07:00
Sylvain Munaut f0666b1ac8 libceph: fix crypto key null deref, memory leak
Avoid crashing if the crypto key payload was NULL, as when it was not correctly
allocated and initialized.  Also, avoid leaking it.

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-08-02 09:19:20 -07:00
Linus Torvalds cc8362b1f6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph changes from Sage Weil:
 "Lots of stuff this time around:

   - lots of cleanup and refactoring in the libceph messenger code, and
     many hard to hit races and bugs closed as a result.
   - lots of cleanup and refactoring in the rbd code from Alex Elder,
     mostly in preparation for the layering functionality that will be
     coming in 3.7.
   - some misc rbd cleanups from Josh Durgin that are finally going
     upstream
   - support for CRUSH tunables (used by newer clusters to improve the
     data placement)
   - some cleanup in our use of d_parent that Al brought up a while back
   - a random collection of fixes across the tree

  There is another patch coming that fixes up our ->atomic_open()
  behavior, but I'm going to hammer on it a bit more before sending it."

Fix up conflicts due to commits that were already committed earlier in
drivers/block/rbd.c, net/ceph/{messenger.c, osd_client.c}

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (132 commits)
  rbd: create rbd_refresh_helper()
  rbd: return obj version in __rbd_refresh_header()
  rbd: fixes in rbd_header_from_disk()
  rbd: always pass ops array to rbd_req_sync_op()
  rbd: pass null version pointer in add_snap()
  rbd: make rbd_create_rw_ops() return a pointer
  rbd: have __rbd_add_snap_dev() return a pointer
  libceph: recheck con state after allocating incoming message
  libceph: change ceph_con_in_msg_alloc convention to be less weird
  libceph: avoid dropping con mutex before fault
  libceph: verify state after retaking con lock after dispatch
  libceph: revoke mon_client messages on session restart
  libceph: fix handling of immediate socket connect failure
  ceph: update MAINTAINERS file
  libceph: be less chatty about stray replies
  libceph: clear all flags on con_close
  libceph: clean up con flags
  libceph: replace connection state bits with states
  libceph: drop unnecessary CLOSED check in socket state change callback
  libceph: close socket directly from ceph_con_close()
  ...
2012-07-31 14:35:28 -07:00
Sage Weil 6139919133 libceph: recheck con state after allocating incoming message
We drop the lock when calling the ->alloc_msg() con op, which means
we need to (a) not clobber con->in_msg without the mutex held, and (b)
we need to verify that we are still in the OPEN state when we retake
it to avoid causing any mayhem.  If the state does change, -EAGAIN
will get us back to con_work() and loop.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-07-30 18:19:45 -07:00
Sage Weil 4740a623d2 libceph: change ceph_con_in_msg_alloc convention to be less weird
This function's calling convention is very limiting.  In particular,
we can't return any error other than ENOMEM (and only implicitly),
which is a problem (see next patch).

Instead, return an normal 0 or error code, and make the skip a pointer
output parameter.  Drop the useless in_hdr argument (we have the con
pointer).

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-07-30 18:19:30 -07:00
Sage Weil 8636ea672f libceph: avoid dropping con mutex before fault
The ceph_fault() function takes the con mutex, so we should avoid
dropping it before calling it.  This fixes a potential race with
another thread calling ceph_con_close(), or _open(), or similar (we
don't reverify con->state after retaking the lock).

Add annotation so that lockdep realizes we will drop the mutex before
returning.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-07-30 18:17:13 -07:00
Sage Weil 7b862e07b1 libceph: verify state after retaking con lock after dispatch
We drop the con mutex when delivering a message.  When we retake the
lock, we need to verify we are still in the OPEN state before
preparing to read the next tag, or else we risk stepping on a
connection that has been closed.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-07-30 18:16:56 -07:00
Sage Weil 4f471e4a9c libceph: revoke mon_client messages on session restart
Revoke all mon_client messages when we shut down the old connection.
This is mostly moot since we are re-using the same ceph_connection,
but it is cleaner.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-07-30 18:16:40 -07:00
Sage Weil 8007b8d626 libceph: fix handling of immediate socket connect failure
If the connect() call immediately fails such that sock == NULL, we
still need con_close_socket() to reset our socket state to CLOSED.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-07-30 18:16:16 -07:00
Sage Weil 756a16a5d5 libceph: be less chatty about stray replies
There are many (normal) conditions that can lead to us getting
unexpected replies, include cluster topology changes, osd failures,
and timeouts.  There's no need to spam the console about it.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-07-30 18:16:03 -07:00
Sage Weil 43c7427d10 libceph: clear all flags on con_close
Signed-off-by: Sage Weil <sage@inktank.com>
2012-07-30 18:16:02 -07:00
Sage Weil 4a86169208 libceph: clean up con flags
Rename flags with CON_FLAG prefix, move the definitions into the c file,
and (better) document their meaning.

Signed-off-by: Sage Weil <sage@inktank.com>
2012-07-30 18:16:01 -07:00
Sage Weil 8dacc7da69 libceph: replace connection state bits with states
Use a simple set of 6 enumerated values for the socket states (CON_STATE_*)
and use those instead of the state bits.  All of the con->state checks are
now under the protection of the con mutex, so this is safe.  It also
simplifies many of the state checks because we can check for anything other
than the expected state instead of various bits for races we can think of.

This appears to hold up well to stress testing both with and without socket
failure injection on the server side.

Signed-off-by: Sage Weil <sage@inktank.com>
2012-07-30 18:16:00 -07:00
Sage Weil d7353dd5aa libceph: drop unnecessary CLOSED check in socket state change callback
If we are CLOSED, the socket is closed and we won't get these.

Signed-off-by: Sage Weil <sage@inktank.com>
2012-07-30 18:15:59 -07:00
Sage Weil ee76e0736d libceph: close socket directly from ceph_con_close()
It is simpler to do this immediately, since we already hold the con mutex.
It also avoids the need to deal with a not-quite-CLOSED socket in con_work.

Signed-off-by: Sage Weil <sage@inktank.com>
2012-07-30 18:15:58 -07:00
Sage Weil 2e8cb10063 libceph: drop gratuitous socket close calls in con_work
If the state is CLOSED or OPENING, we shouldn't have a socket.

Signed-off-by: Sage Weil <sage@inktank.com>
2012-07-30 18:15:58 -07:00
Sage Weil a59b55a602 libceph: move ceph_con_send() closed check under the con mutex
Take the con mutex before checking whether the connection is closed to
avoid racing with someone else closing it.

Signed-off-by: Sage Weil <sage@inktank.com>
2012-07-30 18:15:57 -07:00
Sage Weil 00650931e5 libceph: move msgr clear_standby under con mutex protection
Avoid dropping and retaking con->mutex in the ceph_con_send() case by
leaving locking up to the caller.

Signed-off-by: Sage Weil <sage@inktank.com>
2012-07-30 18:15:56 -07:00
Sage Weil 3b5ede07b5 libceph: fix fault locking; close socket on lossy fault
If we fault on a lossy connection, we should still close the socket
immediately, and do so under the con mutex.

We should also take the con mutex before printing out the state bits in
the debug output.

Signed-off-by: Sage Weil <sage@inktank.com>
2012-07-30 18:15:55 -07:00
Jiaju Zhang 048a9d2d06 libceph: trivial fix for the incorrect debug output
This is a trivial fix for the debug output, as it is inconsistent
with the function name so may confuse people when debugging.

[elder@inktank.com: switched to use __func__]

Signed-off-by: Jiaju Zhang <jjzhang@suse.de>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-07-30 18:15:36 -07:00
Sage Weil 85effe183d libceph: reset connection retry on successfully negotiation
We exponentially back off when we encounter connection errors.  If several
errors accumulate, we will eventually wait ages before even trying to
reconnect.

Fix this by resetting the backoff counter after a successful negotiation/
connection with the remote node.  Fixes ceph issue #2802.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-07-30 18:15:34 -07:00
Sage Weil 5469155f2b libceph: protect ceph_con_open() with mutex
Take the con mutex while we are initiating a ceph open.  This is necessary
because the may have previously been in use and then closed, which could
result in a racing workqueue running con_work().

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-07-30 18:15:33 -07:00
Sage Weil a410702697 libceph: (re)initialize bio_iter on start of message receive
Previously, we were opportunistically initializing the bio_iter if it
appeared to be uninitialized in the middle of the read path.  The problem
is that a sequence like:

 - start reading message
 - initialize bio_iter
 - read half a message
 - messenger fault, reconnect
 - restart reading message
 - ** bio_iter now non-NULL, not reinitialized **
 - read past end of bio, crash

Instead, initialize the bio_iter unconditionally when we allocate/claim
the message for read.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-07-30 18:15:31 -07:00
Sage Weil 6194ea895e libceph: resubmit linger ops when pg mapping changes
The linger op registration (i.e., watch) modifies the object state.  As
such, the OSD will reply with success if it has already applied without
doing the associated side-effects (setting up the watch session state).
If we lose the ACK and resubmit, we will see success but the watch will not
be correctly registered and we won't get notifies.

To fix this, always resubmit the linger op with a new tid.  We accomplish
this by re-registering as a linger (i.e., 'registered') if we are not yet
registered.  Then the second loop will treat this just like a normal
case of re-registering.

This mirrors a similar fix on the userland ceph.git, commit 5dd68b95, and
ceph bug #2796.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-07-30 18:15:31 -07:00
Sage Weil 8c50c81756 libceph: fix mutex coverage for ceph_con_close
Hold the mutex while twiddling all of the state bits to avoid possible
races.  While we're here, make not of why we cannot close the socket
directly.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-07-30 18:15:30 -07:00
Sage Weil 3a140a0d5c libceph: report socket read/write error message
We need to set error_msg to something useful before calling ceph_fault();
do so here for try_{read,write}().  This is more informative than

libceph: osd0 192.168.106.220:6801 (null)

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-07-30 18:15:29 -07:00
Sage Weil 546f04ef71 libceph: support crush tunables
The server side recently added support for tuning some magic
crush variables. Decode these variables if they are present, or use the
default values if they are not present.

Corresponds to ceph.git commit 89af369c25f274fe62ef730e5e8aad0c54f1e5a5.

Signed-off-by: caleb miles <caleb.miles@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-07-30 18:15:23 -07:00
Sage Weil 1fe60e51a3 libceph: move feature bits to separate header
This is simply cleanup that will keep things more closely synced with the
userland code.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-07-30 16:23:22 -07:00
Guanjun He a2a3258417 libceph: prevent the race of incoming work during teardown
Add an atomic variable 'stopping' as flag in struct ceph_messenger,
set this flag to 1 in function ceph_destroy_client(), and add the condition code
in function ceph_data_ready() to test the flag value, if true(1), just return.

Signed-off-by: Guanjun He <gjhe@suse.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2012-07-30 09:29:53 -07:00
Sage Weil a16cb1f707 libceph: fix messenger retry
In ancient times, the messenger could both initiate and accept connections.
An artifact if that was data structures to store/process an incoming
ceph_msg_connect request and send an outgoing ceph_msg_connect_reply.
Sadly, the negotiation code was referencing those structures and ignoring
important information (like the peer's connect_seq) from the correct ones.

Among other things, this fixes tight reconnect loops where the server sends
RETRY_SESSION and we (the client) retries with the same connect_seq as last
time.  This bug pretty easily triggered by injecting socket failures on the
MDS and running some fs workload like workunits/direct_io/test_sync_io.

Signed-off-by: Sage Weil <sage@inktank.com>
2012-07-30 09:29:52 -07:00
Sage Weil cd43045c2d libceph: initialize rb, list nodes in ceph_osd_request
These don't strictly need to be initialized based on how they are used, but
it is good practice to do so.

Reported-by: Alex Elder <elder@inktank.com>
Signed-off-by: Sage Weil <sage@inktank.com>
2012-07-30 09:29:51 -07:00
Sage Weil d50b409fb8 libceph: initialize msgpool message types
Initialize the type field for messages in a msgpool.  The caller was doing
this for osd ops, but not for the reply messages.

Reported-by: Alex Elder <elder@inktank.com>
Signed-off-by: Sage Weil <sage@inktank.com>
2012-07-30 09:29:50 -07:00
Linus Torvalds 3c4cfadef6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking changes from David S Miller:

 1) Remove the ipv4 routing cache.  Now lookups go directly into the FIB
    trie and use prebuilt routes cached there.

    No more garbage collection, no more rDOS attacks on the routing
    cache.  Instead we now get predictable and consistent performance,
    no matter what the pattern of traffic we service.

    This has been almost 2 years in the making.  Special thanks to
    Julian Anastasov, Eric Dumazet, Steffen Klassert, and others who
    have helped along the way.

    I'm sure that with a change of this magnitude there will be some
    kind of fallout, but such things ought the be simple to fix at this
    point.  Luckily I'm not European so I'll be around all of August to
    fix things :-)

    The major stages of this work here are each fronted by a forced
    merge commit whose commit message contains a top-level description
    of the motivations and implementation issues.

 2) Pre-demux of established ipv4 TCP sockets, saves a route demux on
    input.

 3) TCP SYN/ACK performance tweaks from Eric Dumazet.

 4) Add namespace support for netfilter L4 conntrack helpers, from Gao
    Feng.

 5) Add config mechanism for Energy Efficient Ethernet to ethtool, from
    Yuval Mintz.

 6) Remove quadratic behavior from /proc/net/unix, from Eric Dumazet.

 7) Support for connection tracker helpers in userspace, from Pablo
    Neira Ayuso.

 8) Allow userspace driven TX load balancing functions in TEAM driver,
    from Jiri Pirko.

 9) Kill off NLMSG_PUT and RTA_PUT macros, more gross stuff with
    embedded gotos.

10) TCP Small Queues, essentially minimize the amount of TCP data queued
    up in the packet scheduler layer.  Whereas the existing BQL (Byte
    Queue Limits) limits the pkt_sched --> netdevice queuing levels,
    this controls the TCP --> pkt_sched queueing levels.

    From Eric Dumazet.

11) Reduce the number of get_page/put_page ops done on SKB fragments,
    from Alexander Duyck.

12) Implement protection against blind resets in TCP (RFC 5961), from
    Eric Dumazet.

13) Support the client side of TCP Fast Open, basically the ability to
    send data in the SYN exchange, from Yuchung Cheng.

    Basically, the sender queues up data with a sendmsg() call using
    MSG_FASTOPEN, then they do the connect() which emits the queued up
    fastopen data.

14) Avoid all the problems we get into in TCP when timers or PMTU events
    hit a locked socket.  The TCP Small Queues changes added a
    tcp_release_cb() that allows us to queue work up to the
    release_sock() caller, and that's what we use here too.  From Eric
    Dumazet.

15) Zero copy on TX support for TUN driver, from Michael S. Tsirkin.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1870 commits)
  genetlink: define lockdep_genl_is_held() when CONFIG_LOCKDEP
  r8169: revert "add byte queue limit support".
  ipv4: Change rt->rt_iif encoding.
  net: Make skb->skb_iif always track skb->dev
  ipv4: Prepare for change of rt->rt_iif encoding.
  ipv4: Remove all RTCF_DIRECTSRC handliing.
  ipv4: Really ignore ICMP address requests/replies.
  decnet: Don't set RTCF_DIRECTSRC.
  net/ipv4/ip_vti.c: Fix __rcu warnings detected by sparse.
  ipv4: Remove redundant assignment
  rds: set correct msg_namelen
  openvswitch: potential NULL deref in sample()
  tcp: dont drop MTU reduction indications
  bnx2x: Add new 57840 device IDs
  tcp: avoid oops in tcp_metrics and reset tcpm_stamp
  niu: Change niu_rbr_fill() to use unlikely() to check niu_rbr_add_page() return value
  niu: Fix to check for dma mapping errors.
  net: Fix references to out-of-scope variables in put_cmsg_compat()
  net: ethernet: davinci_emac: add pm_runtime support
  net: ethernet: davinci_emac: Remove unnecessary #include
  ...
2012-07-24 10:01:50 -07:00
Sage Weil 5bdca4e076 libceph: fix messenger retry
In ancient times, the messenger could both initiate and accept connections.
An artifact if that was data structures to store/process an incoming
ceph_msg_connect request and send an outgoing ceph_msg_connect_reply.
Sadly, the negotiation code was referencing those structures and ignoring
important information (like the peer's connect_seq) from the correct ones.

Among other things, this fixes tight reconnect loops where the server sends
RETRY_SESSION and we (the client) retries with the same connect_seq as last
time.  This bug pretty easily triggered by injecting socket failures on the
MDS and running some fs workload like workunits/direct_io/test_sync_io.

Signed-off-by: Sage Weil <sage@inktank.com>
2012-07-17 19:35:59 -07:00
Ben Hutchings ae86b9e384 net: Fix non-kernel-doc comments with kernel-doc start marker
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 23:13:45 -07:00
Sage Weil fbb85a478f libceph: allow sock transition from CONNECTING to CLOSED
It is possible to close a socket that is in the OPENING state.  For
example, it can happen if ceph_con_close() is called on the con before
the TCP connection is established.  con_work() will come around and shut
down the socket.

Signed-off-by: Sage Weil <sage@inktank.com>
2012-07-05 21:14:39 -07:00
Sage Weil 735a72ef95 libceph: initialize mon_client con only once
Do not re-initialize the con on every connection attempt.  When we
ceph_con_close, there may still be work queued on the socket (e.g., to
close it), and re-initializing will clobber the work_struct state.

Signed-off-by: Sage Weil <sage@inktank.com>
2012-07-05 21:14:38 -07:00
Sage Weil b7a9e5dd40 libceph: set peer name on con_open, not init
The peer name may change on each open attempt, even when the connection is
reused.

Signed-off-by: Sage Weil <sage@inktank.com>
2012-07-05 21:14:35 -07:00
Alex Elder bc18f4b1c8 libceph: add some fine ASCII art
Sage liked the state diagram I put in my commit description so
I'm putting it in with the code.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2012-07-05 21:14:32 -07:00
Alex Elder 5821bd8ccd libceph: small changes to messenger.c
This patch gathers a few small changes in "net/ceph/messenger.c":
  out_msg_pos_next()
    - small logic change that mostly affects indentation
  write_partial_msg_pages().
    - use a local variable trail_off to represent the offset into
      a message of the trail portion of the data (if present)
    - once we are in the trail portion we will always be there, so we
      don't always need to check against our data position
    - avoid computing len twice after we've reached the trail
    - get rid of the variable tmpcrc, which is not needed
    - trail_off and trail_len never change so mark them const
    - update some comments
  read_partial_message_bio()
    - bio_iovec_idx() will never return an error, so don't bother
      checking for it

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2012-07-05 21:14:31 -07:00
Alex Elder 7593af920b libceph: distinguish two phases of connect sequence
Currently a ceph connection enters a "CONNECTING" state when it
begins the process of (re-)connecting with its peer.  Once the two
ends have successfully exchanged their banner and addresses, an
additional NEGOTIATING bit is set in the ceph connection's state to
indicate the connection information exhange has begun.  The
CONNECTING bit/state continues to be set during this phase.

Rather than have the CONNECTING state continue while the NEGOTIATING
bit is set, interpret these two phases as distinct states.  In other
words, when NEGOTIATING is set, clear CONNECTING.  That way only
one of them will be active at a time.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2012-07-05 21:14:30 -07:00
Alex Elder ab166d5aa3 libceph: separate banner and connect writes
There are two phases in the process of linking together the two ends
of a ceph connection.  The first involves exchanging a banner and
IP addresses, and if that is successful a second phase exchanges
some detail about each side's connection capabilities.

When initiating a connection, the client side now queues to send
its information for both phases of this process at the same time.
This is probably a bit more efficient, but it is slightly messier
from a layering perspective in the code.

So rearrange things so that the client doesn't send the connection
information until it has received and processed the response in the
initial banner phase (in process_banner()).

Move the code (in the (con->sock == NULL) case in try_write()) that
prepares for writing the connection information, delaying doing that
until the banner exchange has completed.  Move the code that begins
the transition to this second "NEGOTIATING" phase out of
process_banner() and into its caller, so preparing to write the
connection information and preparing to read the response are
adjacent to each other.

Finally, preparing to write the connection information now requires
the output kvec to be reset in all cases, so move that into the
prepare_write_connect() and delete it from all callers.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2012-07-05 21:14:29 -07:00
Alex Elder e27947c767 libceph: define and use an explicit CONNECTED state
There is no state explicitly defined when a ceph connection is fully
operational.  So define one.

It's set when the connection sequence completes successfully, and is
cleared when the connection gets closed.

Be a little more careful when examining the old state when a socket
disconnect event is reported.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2012-07-05 21:14:27 -07:00
Alex Elder 3ec50d1868 libceph: clear NEGOTIATING when done
A connection state's NEGOTIATING bit gets set while in CONNECTING
state after we have successfully exchanged a ceph banner and IP
addresses with the connection's peer (the server).  But that bit
is not cleared again--at least not until another connection attempt
is initiated.

Instead, clear it as soon as the connection is fully established.
Also, clear it when a socket connection gets prematurely closed
in the midst of establishing a ceph connection (in case we had
reached the point where it was set).

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2012-07-05 21:14:26 -07:00
Alex Elder bb9e6bba5d libceph: clear CONNECTING in ceph_con_close()
A connection that is closed will no longer be connecting.  So
clear the CONNECTING state bit in ceph_con_close().  Similarly,
if the socket has been closed we no longer are in connecting
state (a new connect sequence will need to be initiated).

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2012-07-05 21:14:24 -07:00
Alex Elder 456ea46865 libceph: don't touch con state in con_close_socket()
In con_close_socket(), a connection's SOCK_CLOSED flag gets set and
then cleared while its shutdown method is called and its reference
gets dropped.

Previously, that flag got set only if it had not already been set,
so setting it in con_close_socket() might have prevented additional
processing being done on a socket being shut down.  We no longer set
SOCK_CLOSED in the socket event routine conditionally, so setting
that bit here no longer provides whatever benefit it might have
provided before.

A race condition could still leave the SOCK_CLOSED bit set even
after we've issued the call to con_close_socket(), so we still clear
that bit after shutting the socket down.  Add a comment explaining
the reason for this.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2012-07-05 21:14:23 -07:00
Alex Elder d65c9e0b9e libceph: just set SOCK_CLOSED when state changes
When a TCP_CLOSE or TCP_CLOSE_WAIT event occurs, the SOCK_CLOSED
connection flag bit is set, and if it had not been previously set
queue_con() is called to ensure con_work() will get a chance to
handle the changed state.

con_work() atomically checks--and if set, clears--the SOCK_CLOSED
bit if it was set.  This means that even if the bit were set
repeatedly, the related processing in con_work() only gets called
once per transition of the bit from 0 to 1.

What's important then is that we ensure con_work() gets called *at
least* once when a socket close event occurs, not that it gets
called *exactly* once.

The work queue mechanism already takes care of queueing work
only if it is not already queued, so there's no need for us
to call queue_con() conditionally.

So this patch just makes it so the SOCK_CLOSED flag gets set
unconditionally in ceph_sock_state_change().

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2012-07-05 21:14:22 -07:00
Alex Elder 188048bce3 libceph: don't change socket state on sock event
Currently the socket state change event handler records an error
message on a connection to distinguish a close while connecting from
a close while a connection was already established.

Changing connection information during handling of a socket event is
not very clean, so instead move this assignment inside con_work(),
where it can be done during normal connection-level processing (and
under protection of the connection mutex as well).

Move the handling of a socket closed event up to the top of the
processing loop in con_work(); there's no point in handling backoff
etc. if we have a newly-closed socket to take care of.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2012-07-05 21:14:20 -07:00
Alex Elder a8d00e3cde libceph: SOCK_CLOSED is a flag, not a state
The following commit changed it so SOCK_CLOSED bit was stored in
a connection's new "flags" field rather than its "state" field.

    libceph: start separating connection flags from state
    commit 928443cd

That bit is used in con_close_socket() to protect against setting an
error message more than once in the socket event handler function.

Unfortunately, the field being operated on in that function was not
updated to be "flags" as it should have been.  This fixes that
error.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2012-07-05 21:14:19 -07:00