Commit Graph

178 Commits

Author SHA1 Message Date
Nick Desaulniers de0d22e50c treewide: remove current_text_addr
Prefer _THIS_IP_ defined in linux/kernel.h.

Most definitions of current_text_addr were the same as _THIS_IP_, but
a few archs had inline assembly instead.

This patch removes the final call site of current_text_addr, making all
of the definitions dead code.

[akpm@linux-foundation.org: fix arch/csky/include/asm/processor.h]
Link: http://lkml.kernel.org/r/20180911182413.180715-1-ndesaulniers@google.com
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 08:54:12 -07:00
Linus Torvalds 4dcb9239da Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping updates from Thomas Gleixner:
 "The timers and timekeeping departement provides:

   - Another large y2038 update with further preparations for providing
     the y2038 safe timespecs closer to the syscalls.

   - An overhaul of the SHCMT clocksource driver

   - SPDX license identifier updates

   - Small cleanups and fixes all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  tick/sched : Remove redundant cpu_online() check
  clocksource/drivers/dw_apb: Add reset control
  clocksource: Remove obsolete CLOCKSOURCE_OF_DECLARE
  clocksource/drivers: Unify the names to timer-* format
  clocksource/drivers/sh_cmt: Add R-Car gen3 support
  dt-bindings: timer: renesas: cmt: document R-Car gen3 support
  clocksource/drivers/sh_cmt: Properly line-wrap sh_cmt_of_table[] initializer
  clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines
  clocksource/drivers/sh_cmt: Fixup for 64-bit machines
  clocksource/drivers/sh_tmu: Convert to SPDX identifiers
  clocksource/drivers/sh_mtu2: Convert to SPDX identifiers
  clocksource/drivers/sh_cmt: Convert to SPDX identifiers
  clocksource/drivers/renesas-ostm: Convert to SPDX identifiers
  clocksource: Convert to using %pOFn instead of device_node.name
  tick/broadcast: Remove redundant check
  RISC-V: Request newstat syscalls
  y2038: signal: Change rt_sigtimedwait to use __kernel_timespec
  y2038: socket: Change recvmmsg to use __kernel_timespec
  y2038: sched: Change sched_rr_get_interval to use __kernel_timespec
  y2038: utimes: Rework #ifdef guards for compat syscalls
  ...
2018-10-25 11:14:36 -07:00
Linus Torvalds ba9f6f8954 Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo updates from Eric Biederman:
 "I have been slowly sorting out siginfo and this is the culmination of
  that work.

  The primary result is in several ways the signal infrastructure has
  been made less error prone. The code has been updated so that manually
  specifying SEND_SIG_FORCED is never necessary. The conversion to the
  new siginfo sending functions is now complete, which makes it
  difficult to send a signal without filling in the proper siginfo
  fields.

  At the tail end of the patchset comes the optimization of decreasing
  the size of struct siginfo in the kernel from 128 bytes to about 48
  bytes on 64bit. The fundamental observation that enables this is by
  definition none of the known ways to use struct siginfo uses the extra
  bytes.

  This comes at the cost of a small user space observable difference.
  For the rare case of siginfo being injected into the kernel only what
  can be copied into kernel_siginfo is delivered to the destination, the
  rest of the bytes are set to 0. For cases where the signal and the
  si_code are known this is safe, because we know those bytes are not
  used. For cases where the signal and si_code combination is unknown
  the bits that won't fit into struct kernel_siginfo are tested to
  verify they are zero, and the send fails if they are not.

  I made an extensive search through userspace code and I could not find
  anything that would break because of the above change. If it turns out
  I did break something it will take just the revert of a single change
  to restore kernel_siginfo to the same size as userspace siginfo.

  Testing did reveal dependencies on preferring the signo passed to
  sigqueueinfo over si->signo, so bit the bullet and added the
  complexity necessary to handle that case.

  Testing also revealed bad things can happen if a negative signal
  number is passed into the system calls. Something no sane application
  will do but something a malicious program or a fuzzer might do. So I
  have fixed the code that performs the bounds checks to ensure negative
  signal numbers are handled"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (80 commits)
  signal: Guard against negative signal numbers in copy_siginfo_from_user32
  signal: Guard against negative signal numbers in copy_siginfo_from_user
  signal: In sigqueueinfo prefer sig not si_signo
  signal: Use a smaller struct siginfo in the kernel
  signal: Distinguish between kernel_siginfo and siginfo
  signal: Introduce copy_siginfo_from_user and use it's return value
  signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZE
  signal: Fail sigqueueinfo if si_signo != sig
  signal/sparc: Move EMT_TAGOVF into the generic siginfo.h
  signal/unicore32: Use force_sig_fault where appropriate
  signal/unicore32: Generate siginfo in ucs32_notify_die
  signal/unicore32: Use send_sig_fault where appropriate
  signal/arc: Use force_sig_fault where appropriate
  signal/arc: Push siginfo generation into unhandled_exception
  signal/ia64: Use force_sig_fault where appropriate
  signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn
  signal/ia64: Use the generic force_sigsegv in setup_frame
  signal/arm/kvm: Use send_sig_mceerr
  signal/arm: Use send_sig_fault where appropriate
  signal/arm: Use force_sig_fault where appropriate
  ...
2018-10-24 11:22:39 +01:00
Christoph Hellwig b733116fea unicore32: remove swiotlb support
unicore32 is a bog standard 32-bit port without larger physical address
space, highmem or any other obvious addressing limitation.  There should
be no need to bounce buffer using swiotlb.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Guan Xuetao <gxt@pku.edu.cn>
2018-09-30 16:07:35 -07:00
Eric W. Biederman ccebcb1f5f signal/unicore32: Generate siginfo in ucs32_notify_die
Pass the signal number, and the signal code, and the faulting
address into uc32_notify_die so the callers do not need
to generate a struct siginfo.

In ucs32_ntoify_die use the newly passed in information to
call force_sig_fault to generate the siginfo and send the error.

This simplifies the code making the chances of bugs much less likely.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-27 22:11:28 +02:00
Arnd Bergmann bf4b6a7d37 y2038: Remove stat64 family from default syscall set
New architectures should no longer need stat64, which is not y2038
safe and has been replaced by statx(). This removes the 'select
__ARCH_WANT_STAT64' statement from asm-generic/unistd.h and instead
moves it into the respective asm/unistd.h UAPI header files for each
architecture that uses it today.

In the generic file, the system call number and entry points are now
made conditional, so newly added architectures (e.g. riscv32 or csky)
will never need to carry backwards compatiblity for it.

arm64 is the only 64-bit architecture using the asm-generic/unistd.h
file, and it already sets __ARCH_WANT_NEW_STAT in its headers, and I
use the same #ifdef here: future 64-bit architectures therefore won't
see newstat or stat64 any more. They don't suffer from the y2038 time_t
overflow, but for consistency it seems best to also let them use statx().

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-08-29 15:42:20 +02:00
Mauro Carvalho Chehab 5fb94e9ca3 docs: Fix some broken references
As we move stuff around, some doc references are broken. Fix some of
them via this script:
	./scripts/documentation-file-ref-check --fix

Manually checked if the produced result is valid, removing a few
false-positives.

Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-06-15 18:10:01 -03:00
Arnd Bergmann 2b5a9a37e9 time: Add an asm-generic/compat.h file
We have a couple of files that try to include asm/compat.h on
architectures where this is available. Those should generally use the
higher-level linux/compat.h file, but that in turn fails to include
asm/compat.h when CONFIG_COMPAT is disabled, unless we can provide
that header on all architectures.

This adds the asm/compat.h for all remaining architectures to
simplify the dependencies.

Architectures that are getting removed in linux-4.17 are not changed
here, to avoid needless conflicts with the removal patches. Those
architectures are broken by this patch, but we have already shown
that they have no users.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-04-19 13:28:51 +02:00
Matthew Wilcox d339d705f7 unicore32: turn flush_dcache_mmap_lock into a no-op
Unicore doesn't walk the VMA tree in its flush_dcache_page()
implementation, so has no need to take the tree_lock.

Link: http://lkml.kernel.org/r/20180313132639.17387-5-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11 10:28:39 -07:00
Masahiro Yamada 2dd8a62c64 linux/const.h: move UL() macro to include/linux/const.h
ARM, ARM64 and UniCore32 duplicate the definition of UL():

  #define UL(x) _AC(x, UL)

This is not actually arch-specific, so it will be useful to move it to a
common header.  Currently, we only have the uapi variant for
linux/const.h, so I am creating include/linux/const.h.

I also added _UL(), _ULL() and ULL() because _AC() is mostly used in
the form either _AC(..., UL) or _AC(..., ULL).  I expect they will be
replaced in follow-up cleanups.  The underscore-prefixed ones should
be used for exported headers.

Link: http://lkml.kernel.org/r/1519301715-31798-4-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11 10:28:38 -07:00
Clement Courbet 0ade34c370 lib: optimize cpumask_next_and()
We've measured that we spend ~0.6% of sys cpu time in cpumask_next_and().
It's essentially a joined iteration in search for a non-zero bit, which is
currently implemented as a lookup join (find a nonzero bit on the lhs,
lookup the rhs to see if it's set there).

Implement a direct join (find a nonzero bit on the incrementally built
join).  Also add generic bitmap benchmarks in the new `test_find_bit`
module for new function (see `find_next_and_bit` in [2] and [3] below).

For cpumask_next_and, direct benchmarking shows that it's 1.17x to 14x
faster with a geometric mean of 2.1 on 32 CPUs [1].  No impact on memory
usage.  Note that on Arm, the new pure-C implementation still outperforms
the old one that uses a mix of C and asm (`find_next_bit`) [3].

[1] Approximate benchmark code:

```
  unsigned long src1p[nr_cpumask_longs] = {pattern1};
  unsigned long src2p[nr_cpumask_longs] = {pattern2};
  for (/*a bunch of repetitions*/) {
    for (int n = -1; n <= nr_cpu_ids; ++n) {
      asm volatile("" : "+rm"(src1p)); // prevent any optimization
      asm volatile("" : "+rm"(src2p));
      unsigned long result = cpumask_next_and(n, src1p, src2p);
      asm volatile("" : "+rm"(result));
    }
  }
```

Results:
pattern1    pattern2     time_before/time_after
0x0000ffff  0x0000ffff   1.65
0x0000ffff  0x00005555   2.24
0x0000ffff  0x00001111   2.94
0x0000ffff  0x00000000   14.0
0x00005555  0x0000ffff   1.67
0x00005555  0x00005555   1.71
0x00005555  0x00001111   1.90
0x00005555  0x00000000   6.58
0x00001111  0x0000ffff   1.46
0x00001111  0x00005555   1.49
0x00001111  0x00001111   1.45
0x00001111  0x00000000   3.10
0x00000000  0x0000ffff   1.18
0x00000000  0x00005555   1.18
0x00000000  0x00001111   1.17
0x00000000  0x00000000   1.25
-----------------------------
               geo.mean  2.06

[2] test_find_next_bit, X86 (skylake)

 [ 3913.477422] Start testing find_bit() with random-filled bitmap
 [ 3913.477847] find_next_bit: 160868 cycles, 16484 iterations
 [ 3913.477933] find_next_zero_bit: 169542 cycles, 16285 iterations
 [ 3913.478036] find_last_bit: 201638 cycles, 16483 iterations
 [ 3913.480214] find_first_bit: 4353244 cycles, 16484 iterations
 [ 3913.480216] Start testing find_next_and_bit() with random-filled
 bitmap
 [ 3913.481074] find_next_and_bit: 89604 cycles, 8216 iterations
 [ 3913.481075] Start testing find_bit() with sparse bitmap
 [ 3913.481078] find_next_bit: 2536 cycles, 66 iterations
 [ 3913.481252] find_next_zero_bit: 344404 cycles, 32703 iterations
 [ 3913.481255] find_last_bit: 2006 cycles, 66 iterations
 [ 3913.481265] find_first_bit: 17488 cycles, 66 iterations
 [ 3913.481266] Start testing find_next_and_bit() with sparse bitmap
 [ 3913.481272] find_next_and_bit: 764 cycles, 1 iterations

[3] test_find_next_bit, arm (v7 odroid XU3).

[  267.206928] Start testing find_bit() with random-filled bitmap
[  267.214752] find_next_bit: 4474 cycles, 16419 iterations
[  267.221850] find_next_zero_bit: 5976 cycles, 16350 iterations
[  267.229294] find_last_bit: 4209 cycles, 16419 iterations
[  267.279131] find_first_bit: 1032991 cycles, 16420 iterations
[  267.286265] Start testing find_next_and_bit() with random-filled
bitmap
[  267.302386] find_next_and_bit: 2290 cycles, 8140 iterations
[  267.309422] Start testing find_bit() with sparse bitmap
[  267.316054] find_next_bit: 191 cycles, 66 iterations
[  267.322726] find_next_zero_bit: 8758 cycles, 32703 iterations
[  267.329803] find_last_bit: 84 cycles, 66 iterations
[  267.336169] find_first_bit: 4118 cycles, 66 iterations
[  267.342627] Start testing find_next_and_bit() with sparse bitmap
[  267.356919] find_next_and_bit: 91 cycles, 1 iterations

[courbet@google.com: v6]
  Link: http://lkml.kernel.org/r/20171129095715.23430-1-courbet@google.com
[geert@linux-m68k.org: m68k/bitops: always include <asm-generic/bitops/find.h>]
  Link: http://lkml.kernel.org/r/1512556816-28627-1-git-send-email-geert@linux-m68k.org
Link: http://lkml.kernel.org/r/20171128131334.23491-1-courbet@google.com
Signed-off-by: Clement Courbet <courbet@google.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yury Norov <ynorov@caviumnetworks.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:44 -08:00
Linus Torvalds 3879ae653a The core framework has a handful of patches this time around, mostly due
to the clk rate protection support added by Jerome Brunet. This feature
 will allow consumers to lock in a certain rate on the output of a clk so
 that things like audio playback don't hear pops when the clk frequency
 changes due to shared parent clks changing rates. Currently the clk
 API doesn't guarantee the rate of a clk stays at the rate you request
 after clk_set_rate() is called, so this new API will allow drivers
 to express that requirement. Beyond this, the core got some debugfs
 pretty printing patches and a couple minor non-critical fixes.
 
 Looking outside of the core framework diff we have some new driver
 additions and the removal of a legacy TI clk driver. Both of these hit
 high in the dirstat. Also, the removal of the asm-generic/clkdev.h file
 causes small one-liners in all the architecture Kbuild files. Overall, the
 driver diff seems to be the normal stuff that comes all the time to
 fix little problems here and there and to support new hardware.
 
 Core:
  - Clk rate protection
  - Symbolic clk flags in debugfs output
  - Clk registration enabled clks while doing bookkeeping updates
 
 New Drivers:
  - Spreadtrum SC9860
  - HiSilicon hi3660 stub
  - Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS
  - Amlogic Meson-AXG
  - ASPEED BMC
 
 Removed Drivers:
  - TI OMAP 3xxx legacy clk (non-DT) support
  - asm*/clkdev.h got removed (not really a driver)
 
 Updates:
  - Renesas FDP1-0 module clock on R-Car M3-W
  - Renesas LVDS module clock on R-Car V3M
  - Misc fixes to pr_err() prints
  - Qualcomm MSM8916 audio fixes
  - Qualcomm IPQ8074 rounded out support for more peripherals
  - Qualcomm Alpha PLL variants
  - Divider code was using container_of() on bad pointers
  - Allwinner DE2 clks on H3
  - Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED
  - Mediatek clk driver compile test support
  - AT91 PMC clk suspend/resume restoration support
  - PLL issues fixed on si5351
  - Broadcom IProc PLL calculation updates
  - DVFS support for Armada mvebu CPU clks
  - Allwinner fixed post-divider support
  - TI clkctrl fixes and support for newer SoCs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJac5vRAAoJEK0CiJfG5JUlUaIP/Riq0tbApfc4k4GMvSvaieR/
 AwZFIMCxOxO+KGdUsBWj7UUoDfBYmxyknHZkVUA/m+Lm7cRH/YHHMghEceZLaBYW
 zPQmDfkTl/QkwysXZMCw9vg4vO0tt5gWbHljQnvVhxVVTCkIRpaE8Vkktj1RZzpY
 WU/TkvPbVGY3SNm504TRXKWC9KpMTEXVvzqlg6zLDJ/jE7PGzBKtewqMoLDCBH2L
 q6b50BSXDo2Hep0vm6e5xneXKjLNR4kgN4PkbM4Yoi4iWLLbgAu79NfyOvvr/imS
 HxOHRms9tejtyaiR6bQSF0pbLOERZ3QSbMFEbxdxnCTuPEfy3Nw/2W7mNJlhJa8g
 EGLMnLL4WdloL4Z83dAcMrj9OmxYf7Yobf5dMidLrQT5EYuafdj0ParbI8TQpWSB
 eTqaffSUGPE/7xuKouYBcbvocpXXWCcokrP/mEn3OEHXkIeeut1Jd3RmEvsi3gtJ
 pNraJTIpvt4c05rj6yLUOhWfyqlA+fH3p4Fx3rrH1tmKEiG+lrhKoxF26uALZe0V
 OvarhG+LPIE10pCIYlQjZjQVnYLGCxsGAIoK1uz7VYvFPh2T0cxQlzzeqFgrlTyN
 32hMj3LhkQw82FG9xZqjTX1935R35mySRlx63x7HStI1YFief2X9+RHjJR/lofG0
 nC0JWTp5sC/pKf54QBXj
 =bGPp
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The core framework has a handful of patches this time around, mostly
  due to the clk rate protection support added by Jerome Brunet.

  This feature will allow consumers to lock in a certain rate on the
  output of a clk so that things like audio playback don't hear pops
  when the clk frequency changes due to shared parent clks changing
  rates. Currently the clk API doesn't guarantee the rate of a clk stays
  at the rate you request after clk_set_rate() is called, so this new
  API will allow drivers to express that requirement.

  Beyond this, the core got some debugfs pretty printing patches and a
  couple minor non-critical fixes.

  Looking outside of the core framework diff we have some new driver
  additions and the removal of a legacy TI clk driver. Both of these hit
  high in the dirstat. Also, the removal of the asm-generic/clkdev.h
  file causes small one-liners in all the architecture Kbuild files.

  Overall, the driver diff seems to be the normal stuff that comes all
  the time to fix little problems here and there and to support new
  hardware.

  Summary:

  Core:
   - Clk rate protection
   - Symbolic clk flags in debugfs output
   - Clk registration enabled clks while doing bookkeeping updates

  New Drivers:
   - Spreadtrum SC9860
   - HiSilicon hi3660 stub
   - Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS
   - Amlogic Meson-AXG
   - ASPEED BMC

  Removed Drivers:
   - TI OMAP 3xxx legacy clk (non-DT) support
   - asm*/clkdev.h got removed (not really a driver)

  Updates:
   - Renesas FDP1-0 module clock on R-Car M3-W
   - Renesas LVDS module clock on R-Car V3M
   - Misc fixes to pr_err() prints
   - Qualcomm MSM8916 audio fixes
   - Qualcomm IPQ8074 rounded out support for more peripherals
   - Qualcomm Alpha PLL variants
   - Divider code was using container_of() on bad pointers
   - Allwinner DE2 clks on H3
   - Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED
   - Mediatek clk driver compile test support
   - AT91 PMC clk suspend/resume restoration support
   - PLL issues fixed on si5351
   - Broadcom IProc PLL calculation updates
   - DVFS support for Armada mvebu CPU clks
   - Allwinner fixed post-divider support
   - TI clkctrl fixes and support for newer SoCs"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits)
  clk: aspeed: Handle inverse polarity of USB port 1 clock gate
  clk: aspeed: Fix return value check in aspeed_cc_init()
  clk: aspeed: Add reset controller
  clk: aspeed: Register gated clocks
  clk: aspeed: Add platform driver and register PLLs
  clk: aspeed: Register core clocks
  clk: Add clock driver for ASPEED BMC SoCs
  clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built
  clk: fix reentrancy of clk_enable() on UP systems
  clk: meson-axg: fix potential NULL dereference in axg_clkc_probe()
  clk: Simplify debugfs registration
  clk: Fix debugfs_create_*() usage
  clk: Show symbolic clock flags in debugfs
  clk: renesas: r8a7796: Add FDP clock
  clk: Move __clk_{get,put}() into private clk.h API
  clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks
  clk: Improve flags doc for of_clk_detect_critical()
  arch: Remove clkdev.h asm-generic from Kbuild
  clk: sunxi-ng: a83t: Add M divider to TCON1 clock
  clk: Prepare to remove asm-generic/clkdev.h
  ...
2018-02-01 16:56:07 -08:00
Linus Torvalds 2382dc9a3e dma mapping changes for Linux 4.16:
This pull requests contains a consolidation of the generic no-IOMMU code,
 a well as the glue code for swiotlb.  All the code is based on the x86
 implementation with hooks to allow all architectures that aren't cache
 coherent to use it.  The x86 conversion itself has been deferred because
 the x86 maintainers were a little busy in the last months.
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAlpxcVoLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYN/Lw/+Je9teM4NPQ8lU/ncbJN/bUzCFGJ6dFt2eVX/6xs3
 sfl8vBdeHt6CBM02rRNecEr31z3+orjQes5JnlEJFYeG3jumV0zCPw/zbxqjzbJ1
 3n6cckLxbxzy8Ca1G/BVjHLAUX5eWp1ujn/Q4d03VKVQZhJvFYlqDbP3TrNVx7xn
 k86u37p/o+ngjwX66UdZ3C4iIBF8zqy6n2kkpv4HUQtHHzPwEvliN39eNilovb56
 iGOzjDX1UWHAu4xCTVnPHSG4fA4XU41NWzIN3DIVPE25lYSISSl9TFAdR8GeZA0G
 0Yj6sW53pRSoUwco1ocoS44/FgrPOB5/vHIL06pABvicXBiomje1QylqcK7zAczk
 esjkfPEZrmZuu99GtqFyDNKEvKKdy+aBGaTZ3y+NxsuBs+0xS2Owz1IE4Tk28xaw
 xh7zn+CVdk2fJh6ZIdw5Eu9b9VN08UriqDmDzO/ylDlcNGcDi7wcxiSTEkHJ1ON/
 g9nletV6f3egL0wljDcOnhCJCHTvmWEeq3z8lE55QzPzSH0hHpnGQ2WD0tKrroxz
 kjOZp0TdXa4F5iysOHe2xl2sftOH0zIkBQJ+oBcK12mTaLu21+yeuCggQXJ/CBdk
 1Ol7l9g9T0TDuZPfiTHt5+6jmECQs92LElWA8x7uF7Fpix3BpnafWaaSMSsosF3F
 D1Y=
 =Nrl9
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mapping

Pull dma mapping updates from Christoph Hellwig:
 "Except for a runtime warning fix from Christian this is all about
  consolidation of the generic no-IOMMU code, a well as the glue code
  for swiotlb.

  All the code is based on the x86 implementation with hooks to allow
  all architectures that aren't cache coherent to use it.

  The x86 conversion itself has been deferred because the x86
  maintainers were a little busy in the last months"

* tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mapping: (57 commits)
  MAINTAINERS: add the iommu list for swiotlb and xen-swiotlb
  arm64: use swiotlb_alloc and swiotlb_free
  arm64: replace ZONE_DMA with ZONE_DMA32
  mips: use swiotlb_{alloc,free}
  mips/netlogic: remove swiotlb support
  tile: use generic swiotlb_ops
  tile: replace ZONE_DMA with ZONE_DMA32
  unicore32: use generic swiotlb_ops
  ia64: remove an ifdef around the content of pci-dma.c
  ia64: clean up swiotlb support
  ia64: use generic swiotlb_ops
  ia64: replace ZONE_DMA with ZONE_DMA32
  swiotlb: remove various exports
  swiotlb: refactor coherent buffer allocation
  swiotlb: refactor coherent buffer freeing
  swiotlb: wire up ->dma_supported in swiotlb_dma_ops
  swiotlb: add common swiotlb_map_ops
  swiotlb: rename swiotlb_free to swiotlb_exit
  x86: rename swiotlb_dma_ops
  powerpc: rename swiotlb_dma_ops
  ...
2018-01-31 11:32:27 -08:00
Christoph Hellwig 90f7816206 unicore32: use generic swiotlb_ops
These are identical to the unicore32 ops, and would also support CMA
if enabled on unicore32.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
2018-01-15 09:35:55 +01:00
Christoph Hellwig b49efd7624 dma-mapping: move dma_mark_clean to dma-direct.h
And unlike the other helpers we don't require a <asm/dma-direct.h> as
this helper is a special case for ia64 only, and this keeps it as
simple as possible.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-10 16:41:12 +01:00
Christoph Hellwig ea8c64ace8 dma-mapping: move swiotlb arch helpers to a new header
phys_to_dma, dma_to_phys and dma_capable are helpers published by
architecture code for use of swiotlb and xen-swiotlb only.  Drivers are
not supposed to use these directly, but use the DMA API instead.

Move these to a new asm/dma-direct.h helper, included by a
linux/dma-direct.h wrapper that provides the default linear mapping
unless the architecture wants to override it.

In the MIPS case the existing dma-coherent.h is reused for now as
untangling it will take a bit of work.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Robin Murphy <robin.murphy@arm.com>
2018-01-10 16:40:54 +01:00
David Howells 0500871f21 Construct init thread stack in the linker script rather than by union
Construct the init thread stack in the linker script rather than doing it
by means of a union so that ia64's init_task.c can be got rid of.

The following symbols are then made available from INIT_TASK_DATA() linker
script macro:

	init_thread_union
	init_stack

INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the
size of the init stack.  init_thread_union is given its own section so that
it can be placed into the stack space in the right order.  I'm assuming
that the ia64 ordering is correct and that the task_struct is first and the
thread_info second.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Will Deacon <will.deacon@arm.com> (arm64)
Tested-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-09 23:21:02 +00:00
Stephen Boyd e0af0c1610 arch: Remove clkdev.h asm-generic from Kbuild
Now that every architecture is using the generic clkdev.h file
and we no longer include asm/clkdev.h anywhere in the tree, we
can remove it.

Cc: Russell King <linux@armlinux.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2018-01-03 09:02:11 -08:00
Linus Torvalds caf9a82657 Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 PTI preparatory patches from Thomas Gleixner:
 "Todays Advent calendar window contains twentyfour easy to digest
  patches. The original plan was to have twenty three matching the date,
  but a late fixup made that moot.

   - Move the cpu_entry_area mapping out of the fixmap into a separate
     address space. That's necessary because the fixmap becomes too big
     with NRCPUS=8192 and this caused already subtle and hard to
     diagnose failures.

     The top most patch is fresh from today and cures a brain slip of
     that tall grumpy german greybeard, who ignored the intricacies of
     32bit wraparounds.

   - Limit the number of CPUs on 32bit to 64. That's insane big already,
     but at least it's small enough to prevent address space issues with
     the cpu_entry_area map, which have been observed and debugged with
     the fixmap code

   - A few TLB flush fixes in various places plus documentation which of
     the TLB functions should be used for what.

   - Rename the SYSENTER stack to CPU_ENTRY_AREA stack as it is used for
     more than sysenter now and keeping the name makes backtraces
     confusing.

   - Prevent LDT inheritance on exec() by moving it to arch_dup_mmap(),
     which is only invoked on fork().

   - Make vysycall more robust.

   - A few fixes and cleanups of the debug_pagetables code. Check
     PAGE_PRESENT instead of checking the PTE for 0 and a cleanup of the
     C89 initialization of the address hint array which already was out
     of sync with the index enums.

   - Move the ESPFIX init to a different place to prepare for PTI.

   - Several code moves with no functional change to make PTI
     integration simpler and header files less convoluted.

   - Documentation fixes and clarifications"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86/cpu_entry_area: Prevent wraparound in setup_cpu_entry_area_ptes() on 32bit
  init: Invoke init_espfix_bsp() from mm_init()
  x86/cpu_entry_area: Move it out of the fixmap
  x86/cpu_entry_area: Move it to a separate unit
  x86/mm: Create asm/invpcid.h
  x86/mm: Put MMU to hardware ASID translation in one place
  x86/mm: Remove hard-coded ASID limit checks
  x86/mm: Move the CR3 construction functions to tlbflush.h
  x86/mm: Add comments to clarify which TLB-flush functions are supposed to flush what
  x86/mm: Remove superfluous barriers
  x86/mm: Use __flush_tlb_one() for kernel memory
  x86/microcode: Dont abuse the TLB-flush interface
  x86/uv: Use the right TLB-flush API
  x86/entry: Rename SYSENTER_stack to CPU_ENTRY_AREA_entry_stack
  x86/doc: Remove obvious weirdnesses from the x86 MM layout documentation
  x86/mm/64: Improve the memory map documentation
  x86/ldt: Prevent LDT inheritance on exec
  x86/ldt: Rework locking
  arch, mm: Allow arch_dup_mmap() to fail
  x86/vsyscall/64: Warn and fail vsyscall emulation in NATIVE mode
  ...
2017-12-23 11:53:04 -08:00
Thomas Gleixner c10e83f598 arch, mm: Allow arch_dup_mmap() to fail
In order to sanitize the LDT initialization on x86 arch_dup_mmap() must be
allowed to fail. Fix up all instances.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: dan.j.williams@intel.com
Cc: hughd@google.com
Cc: keescook@google.com
Cc: kirill.shutemov@linux.intel.com
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-22 20:13:01 +01:00
Hendrik Brueckner c895f6f703 bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type
Commit 0515e5999a ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT
program type") introduced the bpf_perf_event_data structure which
exports the pt_regs structure.  This is OK for multiple architectures
but fail for s390 and arm64 which do not export pt_regs.  Programs
using them, for example, the bpf selftest fail to compile on these
architectures.

For s390, exporting the pt_regs is not an option because s390 wants
to allow changes to it.  For arm64, there is a user_pt_regs structure
that covers parts of the pt_regs structure for use by user space.

To solve the broken uapi for s390 and arm64, introduce an abstract
type for pt_regs and add an asm/bpf_perf_event.h file that concretes
the type.  An asm-generic header file covers the architectures that
export pt_regs today.

The arch-specific enablement for s390 and arm64 follows in separate
commits.

Reported-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Fixes: 0515e5999a ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type")
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-05 15:02:40 +01:00
Levin, Alexander (Sasha Levin) 75f296d93b kmemcheck: stop using GFP_NOTRACK and SLAB_NOTRACK
Convert all allocations that used a NOTRACK flag to stop using it.

Link: http://lkml.kernel.org/r/20171007030159.22241-3-alexander.levin@verizon.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Hansen <devtimhansen@gmail.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15 18:21:04 -08:00
Linus Torvalds e37e0ee019 A couple of dma-mapping updates:
- turn dma_cache_sync into a dma_map_ops instance and remove
    implementation that purely are dead because the architecture
    doesn't support noncoherent allocations
  - add a flag for busses that need DMA configuration (Robin Murphy)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAloLSrYLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYOMuQ//XXD94uNPYavrgXzGsAtg+I+LEm+xyk4T0dX5fxfj
 amXX49MHoGemjsBgzJlkQMMFqwDEdkKyEuFnEuy6OeowYCyD6zW0MJ3MwP9OosNJ
 PNTdGZIfSvxPYEW8cR9AdK3iQ2loMBZnYhd+O/oVjSugULLW2DNa7r2VRktcCKoh
 8Ob/8gL6Y9xEYJBRszhrBwKTa/hU8IThxxozBFzN7I3LIKyFboSTcwXGLAHow43g
 4anCTjWTaDcoU2JwY6UTRKRRTV+gD0ZRcsZfd8lNNb5rtMVZkBVOHbF14SMAmw1r
 kSgRcU3+WIFPhK/8wBYqtGZZGnOgFBTHVeqow3AdS728pBWlWl8niTK0DiIgCd3m
 qzScF6SqfN1bCZkZAy8FUV2l0DPYKS6lvyNkf00Eb2W/f6LEqAcjCi2QDDxRfaw+
 Vm97nPUiM+uXNy/6KtAy6ChdprSqx12/edXPp7Y3H2rS/+Dmr6exeix+wb7QUN8W
 JI7ZRHo4JLaJZk/XrZtGX/6jnN1Jo7vfApQOmYDY7kE1iGtOU/LQQj8gcZRVQxML
 4soN6ivSmZX2k03LabWHpYQ8QiyCSYChLC+Az7rQH47LDLeu1IdTJu6orpXpaxyo
 ymzEWlHbmF7mE66X4g/Up/eAYk2YLUA3rKLGVjAIaWDBzHftSFg5EaAnqMADC1G2
 hSo=
 =ALJf
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - turn dma_cache_sync into a dma_map_ops instance and remove
   implementation that purely are dead because the architecture doesn't
   support noncoherent allocations

 - add a flag for busses that need DMA configuration (Robin Murphy)

* tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: turn dma_cache_sync into a dma_map_ops method
  sh: make dma_cache_sync a no-op
  xtensa: make dma_cache_sync a no-op
  unicore32: make dma_cache_sync a no-op
  powerpc: make dma_cache_sync a no-op
  mn10300: make dma_cache_sync a no-op
  microblaze: make dma_cache_sync a no-op
  ia64: make dma_cache_sync a no-op
  frv: make dma_cache_sync a no-op
  x86: make dma_cache_sync a no-op
  floppy: consolidate the dummy fd_cacheflush definition
  drivers: flag buses which demand DMA configuration
2017-11-14 16:54:12 -08:00
Greg Kroah-Hartman e2be04c7f9 License cleanup: add SPDX license identifier to uapi header files with a license
Many user space API headers have licensing information, which is either
incomplete, badly formatted or just a shorthand for referring to the
license under which the file is supposed to be.  This makes it hard for
compliance tools to determine the correct license.

Update these files with an SPDX license identifier.  The identifier was
chosen based on the license information in the file.

GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license
identifier with the added 'WITH Linux-syscall-note' exception, which is
the officially assigned exception identifier for the kernel syscall
exception:

   NOTE! This copyright does *not* cover user programs that use kernel
   services by normal system calls - this is merely considered normal use
   of the kernel, and does *not* fall under the heading of "derived work".

This exception makes it possible to include GPL headers into non GPL
code, without confusing license compliance tools.

Headers which have either explicit dual licensing or are just licensed
under a non GPL license are updated with the corresponding SPDX
identifier and the GPLv2 with syscall exception identifier.  The format
is:
        ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE)

SPDX license identifiers are a legally binding shorthand, which can be
used instead of the full boiler plate text.  The update does not remove
existing license information as this has to be done on a case by case
basis and the copyright holders might have to be consulted. This will
happen in a separate step.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.  See the previous patch in this series for the
methodology of how this patch was researched.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:20:11 +01:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Christoph Hellwig c9eb6172c3 dma-mapping: turn dma_cache_sync into a dma_map_ops method
After we removed all the dead wood it turns out only two architectures
actually implement dma_cache_sync as a real op: mips and parisc.  Add
a cache_sync method to struct dma_map_ops and implement it for the
mips defualt DMA ops, and the parisc pa11 ops.

Note that arm, arc and openrisc support DMA_ATTR_NON_CONSISTENT, but
never provided a functional dma_cache_sync implementations, which
seems somewhat odd.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2017-10-19 16:37:49 +02:00
Christoph Hellwig a535bb8010 unicore32: make dma_cache_sync a no-op
unicore32 does not implement DMA_ATTR_NON_CONSISTENT allocations, so it
doesn't make any sense to do any work in dma_cache_sync given that it
must be a no-op when dma_alloc_attrs returns coherent memory.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2017-10-19 16:37:36 +02:00
Masahiro Yamada ee73056bee unicore32: move generic-y of exported headers to uapi/asm/Kbuild
Since commit fcc8487d47 ("uapi: export all headers under uapi
directories"), all (and only) headers under uapi directories are
exported, but asm-generic wrappers are still exceptions.

To complete de-coupling the uapi from kernel headers, move generic-y
of exported headers to uapi/asm/Kbuild.

With this change, "make headers_install" will just need to parse
uapi/asm/Kbuild to build up exported headers.

Also, move "generic-y += kprobes.h" up in order to keep the entries
sorted.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-07-11 21:33:52 +09:00
Christoph Hellwig 6bc51cbaa9 signal: Remove non-uapi <asm/siginfo.h>
By moving the kernel side __SI_* defintions right next to the userspace
ones we can kill the non-uapi versions of <asm/siginfo.h> include
include/asm-generic/siginfo.h and untangle the unholy mess of includes.

[ tglx: Removed uapi/asm/siginfo.h from m32r, microblaze, mn10300 and score ]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-ia64@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: sparclinux@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20170603190102.28866-6-hch@lst.de
2017-06-04 15:11:47 +02:00
Nicolas Dichtel fcc8487d47 uapi: export all headers under uapi directories
Regularly, when a new header is created in include/uapi/, the developer
forgets to add it in the corresponding Kbuild file. This error is usually
detected after the release is out.

In fact, all headers under uapi directories should be exported, thus it's
useless to have an exhaustive list.

After this patch, the following files, which were not exported, are now
exported (with make headers_install_all):
asm-arc/kvm_para.h
asm-arc/ucontext.h
asm-blackfin/shmparam.h
asm-blackfin/ucontext.h
asm-c6x/shmparam.h
asm-c6x/ucontext.h
asm-cris/kvm_para.h
asm-h8300/shmparam.h
asm-h8300/ucontext.h
asm-hexagon/shmparam.h
asm-m32r/kvm_para.h
asm-m68k/kvm_para.h
asm-m68k/shmparam.h
asm-metag/kvm_para.h
asm-metag/shmparam.h
asm-metag/ucontext.h
asm-mips/hwcap.h
asm-mips/reg.h
asm-mips/ucontext.h
asm-nios2/kvm_para.h
asm-nios2/ucontext.h
asm-openrisc/shmparam.h
asm-parisc/kvm_para.h
asm-powerpc/perf_regs.h
asm-sh/kvm_para.h
asm-sh/ucontext.h
asm-tile/shmparam.h
asm-unicore32/shmparam.h
asm-unicore32/ucontext.h
asm-x86/hwcap2.h
asm-xtensa/kvm_para.h
drm/armada_drm.h
drm/etnaviv_drm.h
drm/vgem_drm.h
linux/aspeed-lpc-ctrl.h
linux/auto_dev-ioctl.h
linux/bcache.h
linux/btrfs_tree.h
linux/can/vxcan.h
linux/cifs/cifs_mount.h
linux/coresight-stm.h
linux/cryptouser.h
linux/fsmap.h
linux/genwqe/genwqe_card.h
linux/hash_info.h
linux/kcm.h
linux/kcov.h
linux/kfd_ioctl.h
linux/lightnvm.h
linux/module.h
linux/nbd-netlink.h
linux/nilfs2_api.h
linux/nilfs2_ondisk.h
linux/nsfs.h
linux/pr.h
linux/qrtr.h
linux/rpmsg.h
linux/sched/types.h
linux/sed-opal.h
linux/smc.h
linux/smc_diag.h
linux/stm.h
linux/switchtec_ioctl.h
linux/vfio_ccw.h
linux/wil6210_uapi.h
rdma/bnxt_re-abi.h

Note that I have removed from this list the files which are generated in every
exported directories (like .install or .install.cmd).

Thanks to Julien Floret <julien.floret@6wind.com> for the tip to get all
subdirs with a pure makefile command.

For the record, note that exported files for asm directories are a mix of
files listed by:
 - include/uapi/asm-generic/Kbuild.asm;
 - arch/<arch>/include/uapi/asm/Kbuild;
 - arch/<arch>/include/asm/Kbuild.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Mark Salter <msalter@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-05-11 00:21:54 +09:00
Linus Torvalds 857f864014 pci-v4.12-changes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZEHmsAAoJEFmIoMA60/r88SgQAJbFddueb0+DfJ+USDud4b/Z
 akfS+G1UAm+TgtMyh1wM49dHzFssp36uWJxtWI+bPqBzuy94PMCbz7JVUV28gX9G
 tFhFuc5YH94I/3y85rbZnolb6uZN9MhLjzTFqDC9ilW6HFqmwK4t4wlHSCjQN1St
 svLYvs2G6n6/VK3Fre7/wOvdZ1erG4Qod+kn5Tx3K5TQydmRlaSBfK+DRANuDBkM
 KzGO7Bkc/Cx8hb9pHmaey/wxmNrrgmVjTtWrEnb2tEq833zP4h6GhUIJEKodMSi5
 gXPNZgKlu3n5L592M0UCh4EoHejzkv9wrcsoDm+djmsc5Zg2Howq4kAdHP8k4hUG
 0gt8n0ni9vhJN56jikrGi7cAdHCKSNnx2Ue/qTCbX0ncB3XUMuJxJwCsgW/6wa9f
 oU7tRtTS03UltnKoFAcyYclS4TaSY4SA4ySaK6Hi+cRkdVFDdyHQYbHHNSU7MsA+
 IS2tXvGoIdSYyrZMHSRcl2rRTfYQUkmPEvBF3LvqZr32M4mJMmUNAPLZaly373ZE
 iwq0ZJlrLeM0cqdFIG3S60RtJyQk/HBN1NMqrYHArWOxvWIgNd5F8NCsTTxY3wU3
 IxgBIuUFcbVwVkqEHGs8K5AvB3oghqdnA3eGOV79799eMtLn3LOvyIlpHMSw9WUq
 ags00JtMLitfNPBH3eSl
 =eE4D
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - add framework for supporting PCIe devices in Endpoint mode (Kishon
   Vijay Abraham I)

 - use non-postable PCI config space mappings when possible (Lorenzo
   Pieralisi)

 - clean up and unify mmap of PCI BARs (David Woodhouse)

 - export and unify Function Level Reset support (Christoph Hellwig)

 - avoid FLR for Intel 82579 NICs (Sasha Neftin)

 - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig)

 - short-circuit config access failures for disconnected devices (Keith
   Busch)

 - remove D3 sleep delay when possible (Adrian Hunter)

 - freeze PME scan before suspending devices (Lukas Wunner)

 - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava)

 - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann)

 - add arch-specific alignment control to improve device passthrough by
   avoiding multiple BARs in a page (Yongji Xie)

 - add sysfs sriov_drivers_autoprobe to control VF driver binding
   (Bodong Wang)

 - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas)

 - fix crashes when unbinding host controllers that don't support
   removal (Brian Norris)

 - add driver for MicroSemi Switchtec management interface (Logan
   Gunthorpe)

 - add driver for Faraday Technology FTPCI100 host bridge (Linus
   Walleij)

 - add i.MX7D support (Andrey Smirnov)

 - use generic MSI support for Aardvark (Thomas Petazzoni)

 - make Rockchip driver modular (Brian Norris)

 - advertise 128-byte Read Completion Boundary support for Rockchip
   (Shawn Lin)

 - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin)

 - convert atomic_t to refcount_t in HV driver (Elena Reshetova)

 - add CPU IRQ affinity in HV driver (K. Y. Srinivasan)

 - fix PCI bus removal in HV driver (Long Li)

 - add support for ThunderX2 DMA alias topology (Jayachandran C)

 - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki)

 - add ITE 8893 bridge DMA alias quirk (Jarod Wilson)

 - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices
   (Manish Jaggi)

* tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits)
  PCI: Don't allow unbinding host controllers that aren't prepared
  ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
  MAINTAINERS: Add PCI Endpoint maintainer
  Documentation: PCI: Add userguide for PCI endpoint test function
  tools: PCI: Add sample test script to invoke pcitest
  tools: PCI: Add a userspace tool to test PCI endpoint
  Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
  misc: Add host side PCI driver for PCI test function device
  PCI: Add device IDs for DRA74x and DRA72x
  dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access
  PCI: dwc: dra7xx: Workaround for errata id i870
  dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode
  PCI: dwc: dra7xx: Add EP mode support
  PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
  dt-bindings: PCI: Add DT bindings for PCI designware EP mode
  PCI: dwc: designware: Add EP mode support
  Documentation: PCI: Add binding documentation for pci-test endpoint function
  ixgbe: Use pcie_flr() instead of duplicating it
  IB/hfi1: Use pcie_flr() instead of duplicating it
  PCI: imx6: Fix spelling mistake: "contol" -> "control"
  ...
2017-05-08 19:03:25 -07:00
Linus Torvalds d3b5d35290 Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
 "The main x86 MM changes in this cycle were:

   - continued native kernel PCID support preparation patches to the TLB
     flushing code (Andy Lutomirski)

   - various fixes related to 32-bit compat syscall returning address
     over 4Gb in applications, launched from 64-bit binaries - motivated
     by C/R frameworks such as Virtuozzo. (Dmitry Safonov)

   - continued Intel 5-level paging enablement: in particular the
     conversion of x86 GUP to the generic GUP code. (Kirill A. Shutemov)

   - x86/mpx ABI corner case fixes/enhancements (Joerg Roedel)

   - ... plus misc updates, fixes and cleanups"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
  mm, zone_device: Replace {get, put}_zone_device_page() with a single reference to fix pmem crash
  x86/mm: Fix flush_tlb_page() on Xen
  x86/mm: Make flush_tlb_mm_range() more predictable
  x86/mm: Remove flush_tlb() and flush_tlb_current_task()
  x86/vm86/32: Switch to flush_tlb_mm_range() in mark_screen_rdonly()
  x86/mm/64: Fix crash in remove_pagetable()
  Revert "x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementation"
  x86/boot/e820: Remove a redundant self assignment
  x86/mm: Fix dump pagetables for 4 levels of page tables
  x86/mpx, selftests: Only check bounds-vs-shadow when we keep shadow
  x86/mpx: Correctly report do_mpx_bt_fault() failures to user-space
  Revert "x86/mm/numa: Remove numa_nodemask_from_meminfo()"
  x86/espfix: Add support for 5-level paging
  x86/kasan: Extend KASAN to support 5-level paging
  x86/mm: Add basic defines/helpers for CONFIG_X86_5LEVEL=y
  x86/paravirt: Add 5-level support to the paravirt code
  x86/mm: Define virtual memory map for 5-level paging
  x86/asm: Remove __VIRTUAL_MASK_SHIFT==47 assert
  x86/boot: Detect 5-level paging support
  x86/mm/numa: Remove numa_nodemask_from_meminfo()
  ...
2017-05-01 23:54:56 -07:00
Al Viro eea86b637a Merge branches 'uaccess.alpha', 'uaccess.arc', 'uaccess.arm', 'uaccess.arm64', 'uaccess.avr32', 'uaccess.bfin', 'uaccess.c6x', 'uaccess.cris', 'uaccess.frv', 'uaccess.h8300', 'uaccess.hexagon', 'uaccess.ia64', 'uaccess.m32r', 'uaccess.m68k', 'uaccess.metag', 'uaccess.microblaze', 'uaccess.mips', 'uaccess.mn10300', 'uaccess.nios2', 'uaccess.openrisc', 'uaccess.parisc', 'uaccess.powerpc', 'uaccess.s390', 'uaccess.score', 'uaccess.sh', 'uaccess.sparc', 'uaccess.tile', 'uaccess.um', 'uaccess.unicore32', 'uaccess.x86' and 'uaccess.xtensa' into work.uaccess 2017-04-26 12:06:59 -04:00
David Woodhouse 69c701ec1f unicore32/PCI: Use generic pci_mmap_resource_range()
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-20 08:47:47 -05:00
David Woodhouse 11df19546f PCI: Move multiple declarations of pci_mmap_page_range() to <linux/pci.h>
We can declare it <linux/pci.h> even on platforms where it isn't going to
be defined.  There's no need to have it littered through the various
<asm/pci.h> files.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-18 13:02:11 -05:00
Al Viro bee3f412d6 Merge branch 'parisc-4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux into uaccess.parisc 2017-04-02 10:33:48 -04:00
Al Viro 2ef59f2856 unicore32: get rid of zeroing and switch to RAW_COPY_USER
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-28 18:24:04 -04:00
Al Viro 3fb5007528 asm-generic/uaccess.h: don't mess with __copy_{to,from}_user
only h8300 actually used those; might as well define them there.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-28 16:43:44 -04:00
Al Viro db68ce10c4 new helper: uaccess_kernel()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-28 16:43:25 -04:00
Al Viro aaa2e7ac80 add asm-generic/extable.h
... and make the users of generic uaccess.h use that.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-27 20:27:28 -04:00
Kirill A. Shutemov 9a804fecee mm/gup: Drop the arch_pte_access_permitted() MMU callback
The only arch that defines it to something meaningful is x86.
But x86 doesn't use the generic GUP_fast() implementation -- the
only place where the callback is called.

Let's drop it.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aneesh Kumar K . V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dann Frazier <dann.frazier@canonical.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170316152655.37789-2-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-18 09:48:01 +01:00
Kirill A. Shutemov 9849a5697d arch, mm: convert all architectures to use 5level-fixup.h
If an architecture uses 4level-fixup.h we don't need to do anything as
it includes 5level-fixup.h.

If an architecture uses pgtable-nop*d.h, define __ARCH_USE_5LEVEL_HACK
before inclusion of the header. It makes asm-generic code to use
5level-fixup.h.

If an architecture has 4-level paging or folds levels on its own,
include 5level-fixup.h directly.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09 11:48:47 -08:00
Al Viro af1d5b37d6 uaccess: drop duplicate includes from asm/uaccess.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-05 21:57:49 -05:00
Luis R. Rodriguez 7d134b2ce6 kprobes: move kprobe declarations to asm-generic/kprobes.h
Often all is needed is these small helpers, instead of compiler.h or a
full kprobes.h.  This is important for asm helpers, in fact even some
asm/kprobes.h make use of these helpers...  instead just keep a generic
asm file with helpers useful for asm code with the least amount of
clutter as possible.

Likewise we need now to also address what to do about this file for both
when architectures have CONFIG_HAVE_KPROBES, and when they do not.  Then
for when architectures have CONFIG_HAVE_KPROBES but have disabled
CONFIG_KPROBES.

Right now most asm/kprobes.h do not have guards against CONFIG_KPROBES,
this means most architecture code cannot include asm/kprobes.h safely.
Correct this and add guards for architectures missing them.
Additionally provide architectures that not have kprobes support with
the default asm-generic solution.  This lets us force asm/kprobes.h on
the header include/linux/kprobes.h always, but most importantly we can
now safely include just asm/kprobes.h on architecture code without
bringing the full kitchen sink of header files.

Two architectures already provided a guard against CONFIG_KPROBES on its
kprobes.h: sh, arch.  The rest of the architectures needed gaurds added.
We avoid including any not-needed headers on asm/kprobes.h unless
kprobes have been enabled.

In a subsequent atomic change we can try now to remove compiler.h from
include/linux/kprobes.h.

During this sweep I've also identified a few architectures defining a
common macro needed for both kprobes and ftrace, that of the definition
of the breakput instruction up.  Some refer to this as
BREAKPOINT_INSTRUCTION.  This must be kept outside of the #ifdef
CONFIG_KPROBES guard.

[mcgrof@kernel.org: fix arm64 build]
  Link: http://lkml.kernel.org/r/CAB=NE6X1WMByuARS4mZ1g9+W=LuVBnMDnh_5zyN0CLADaVh=Jw@mail.gmail.com
[sfr@canb.auug.org.au: fixup for kprobes declarations moving]
  Link: http://lkml.kernel.org/r/20170214165933.13ebd4f4@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170203233139.32682-1-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:45 -08:00
Linus Torvalds ac1820fb28 This is a tree wide change and has been kept separate for that reason.
Bart Van Assche noted that the ib DMA mapping code was significantly
 similar enough to the core DMA mapping code that with a few changes
 it was possible to remove the IB DMA mapping code entirely and
 switch the RDMA stack to use the core DMA mapping code.  This resulted
 in a nice set of cleanups, but touched the entire tree.  This branch
 will be submitted separately to Linus at the end of the merge window
 as per normal practice for tree wide changes like this.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYo06oAAoJELgmozMOVy/d9Z8QALedWHdu98St1L0u2c8sxnR9
 2zo/4sF5Vb9u7FpmdIX32L4SQ9s9KhPE8Qp8NtZLf9v10zlDebIRJDpXknXtKooV
 CAXxX4sxBXV27/UrhbZEfXiPrmm6ccJFyIfRnMU6NlMqh2AtAsRa5AC2/RMp8oUD
 Med97PFiF0o6TD22/UH1VFbRpX1zjaKyqm7a3as5sJfzNA+UGIZAQ7Euz8000DKZ
 xCgVLTEwS0FmOujtBkCst7xa9TjuqR1HLOB4DdGvAhP6BHdz2yamM7Qmh9NN+NEX
 0BtjsuXomtn6j6AszGC+bpipCZh3NUigcwoFAARXCYFHibBvo4DPdFeGsraFgXdy
 1+KyR8CCeQG3Aly5Vwr264RFPGkGpwMj8PsBlXgQVtrlg4rriaCzOJNmIIbfdADw
 ftqhxBOzReZw77aH2s+9p2ILRfcAmPqhynLvFGFo9LBvsik8LVso7YgZN0xGxwcI
 IjI/XGC8UskPVsIZBIYA6sl2bYzgOjtBIHiXjRrPlW3uhduIXLrvKFfLPP/5XLAG
 ehLXK+J0bfsyY9ClmlNS8oH/WdLhXAyy/KNmnj5bRRm9qg6BRJR3bsOBhZJODuoC
 XgEXFfF6/7roNESWxowff7pK0rTkRg/m/Pa4VQpeO+6NWHE7kgZhL6kyIp5nKcwS
 3e7mgpcwC+3XfA/6vU3F
 =e0Si
 -----END PGP SIGNATURE-----

Merge tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

Pull rdma DMA mapping updates from Doug Ledford:
 "Drop IB DMA mapping code and use core DMA code instead.

  Bart Van Assche noted that the ib DMA mapping code was significantly
  similar enough to the core DMA mapping code that with a few changes it
  was possible to remove the IB DMA mapping code entirely and switch the
  RDMA stack to use the core DMA mapping code.

  This resulted in a nice set of cleanups, but touched the entire tree
  and has been kept separate for that reason."

* tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits)
  IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it
  IB/core: Remove ib_device.dma_device
  nvme-rdma: Switch from dma_device to dev.parent
  RDS: net: Switch from dma_device to dev.parent
  IB/srpt: Modify a debug statement
  IB/srp: Switch from dma_device to dev.parent
  IB/iser: Switch from dma_device to dev.parent
  IB/IPoIB: Switch from dma_device to dev.parent
  IB/rxe: Switch from dma_device to dev.parent
  IB/vmw_pvrdma: Switch from dma_device to dev.parent
  IB/usnic: Switch from dma_device to dev.parent
  IB/qib: Switch from dma_device to dev.parent
  IB/qedr: Switch from dma_device to dev.parent
  IB/ocrdma: Switch from dma_device to dev.parent
  IB/nes: Remove a superfluous assignment statement
  IB/mthca: Switch from dma_device to dev.parent
  IB/mlx5: Switch from dma_device to dev.parent
  IB/mlx4: Switch from dma_device to dev.parent
  IB/i40iw: Remove a superfluous assignment statement
  IB/hns: Switch from dma_device to dev.parent
  ...
2017-02-25 13:45:43 -08:00
Frederic Weisbecker b672592f02 sched/cputime: Remove generic asm headers
cputime_t is now only used by two architectures:

	* powerpc (when CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y)
	* s390

And since the core doesn't use it anymore, we don't need any arch support
from the others. So we can remove their stub implementations.

A final cleanup would be to provide an efficient pure arch
implementation of cputime_to_nsec() for s390 and powerpc and finally
remove include/linux/cputime.h .

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Link: http://lkml.kernel.org/r/1485832191-26889-36-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-01 09:14:07 +01:00
Bart Van Assche 815dd18788 treewide: Consolidate get_dma_ops() implementations
Introduce a new architecture-specific get_arch_dma_ops() function
that takes a struct bus_type * argument. Add get_dma_ops() in
<linux/dma-mapping.h>.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Russell King <linux@armlinux.org.uk>
Cc: x86@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24 12:23:35 -05:00
Bart Van Assche 5299709d0a treewide: Constify most dma_map_ops structures
Most dma_map_ops structures are never modified. Constify these
structures such that these can be write-protected. This patch
has been generated as follows:

git grep -l 'struct dma_map_ops' |
  xargs -d\\n sed -i \
    -e 's/struct dma_map_ops/const struct dma_map_ops/g' \
    -e 's/const struct dma_map_ops {/struct dma_map_ops {/g' \
    -e 's/^const struct dma_map_ops;$/struct dma_map_ops;/' \
    -e 's/const const struct dma_map_ops /const struct dma_map_ops /g';
sed -i -e 's/const \(struct dma_map_ops intel_dma_ops\)/\1/' \
  $(git grep -l 'struct dma_map_ops intel_dma_ops');
sed -i -e 's/const \(struct dma_map_ops dma_iommu_ops\)/\1/' \
  $(git grep -l 'struct dma_map_ops' | grep ^arch/powerpc);
sed -i -e '/^struct vmd_dev {$/,/^};$/ s/const \(struct dma_map_ops[[:blank:]]dma_ops;\)/\1/' \
       -e '/^static void vmd_setup_dma_ops/,/^}$/ s/const \(struct dma_map_ops \*dest\)/\1/' \
       -e 's/const \(struct dma_map_ops \*dest = \&vmd->dma_ops\)/\1/' \
    drivers/pci/host/*.c
sed -i -e '/^void __init pci_iommu_alloc(void)$/,/^}$/ s/dma_ops->/intel_dma_ops./' arch/ia64/kernel/pci-dma.c
sed -i -e 's/static const struct dma_map_ops sn_dma_ops/static struct dma_map_ops sn_dma_ops/' arch/ia64/sn/pci/pci_dma.c
sed -i -e 's/(const struct dma_map_ops \*)//' drivers/misc/mic/bus/vop_bus.c

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Russell King <linux@armlinux.org.uk>
Cc: x86@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24 12:23:35 -05:00
Christian Borntraeger 6d0d287891 locking/core: Provide common cpu_relax_yield() definition
No need to duplicate the same define everywhere. Since
the only user is stop-machine and the only provider is
s390, we can use a default implementation of cpu_relax_yield()
in sched.h.

Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Noam Camus <noamc@ezchip.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: kvm@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-s390 <linux-s390@vger.kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: sparclinux@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1479298985-191589-1-git-send-email-borntraeger@de.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-17 08:17:36 +01:00
Christian Borntraeger 5bd0b85ba8 locking/core, arch: Remove cpu_relax_lowlatency()
As there are no users left, we can remove cpu_relax_lowlatency()
implementations from every architecture.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Noam Camus <noamc@ezchip.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: virtualization@lists.linux-foundation.org
Cc: xen-devel@lists.xenproject.org
Cc: <linux-arch@vger.kernel.org>
Link: http://lkml.kernel.org/r/1477386195-32736-6-git-send-email-borntraeger@de.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-16 10:15:11 +01:00