Commit Graph

7258 Commits

Author SHA1 Message Date
Martin Schwidefsky 0244ad004a Remove GENERIC_HARDIRQ config option
After the last architecture switched to generic hard irqs the config
options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
for !CONFIG_GENERIC_HARDIRQS can be removed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-13 15:09:52 +02:00
Linus Torvalds decf7abcc9 sound fixes for 3.12-rc1
A few last-minute fixes for 3.12-rc1.  All patches are driver specific.
 
 - HD-audio fixes: MacBook 6,1/6,2 speaker fix, ASUS TX300 dock speaker
   fix, Toshiba Satellite irq fix, Haswell HDMI audio cleanups)
 
 - ASoC fixes: atmel irq fix, fsl DT fix, mc13783 spi fix, kirkwood
   compatible string change, etc
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJSMWJeAAoJEGwxgFQ9KSmkkLsP/RMeleT18hbZEhdSZsJaqErg
 p6Dk59fb28HrQrY/ECcZnBChGFgCagS316lBjuEkDtQmZdhYtIDHV9r/udV4MbFc
 rX4IVNv1JerpCyZu4pC0yngHiEX3NMBmu204RJBC8vzJt3fupTFIioliNQlmMuiR
 k6Kb9kGmNHLtA7LwshHwNs8JwXEJHUcnsBGdPB0BUy8BpZ8FVTIOvuBixpxv9kXm
 +n80KRhY/YBjpU+bTvGTgJhH7U3BXylU20q5cO2ukv8vW79LGNZ0XA5Rnerrlr/F
 fvDzg+liOEV8ijchfS9rhs28J+4ICHmFkY/rj7QFpVpP9xYfpqhvw93KmIACirDX
 DlJt63fOJuHbGEv5cGjAmdZXcKONoD9fG11CKDj46Fm4borNy7DdfmMLxNM3xo5q
 rxbgUWplCDHFRALXATJ3t8Occz71l2W+GjklmI7td8K5SD6JCzSI1GdR4YVVf76B
 Wd6AM3wpIGKdjCwZvT5jDBb/4O8ZMtOqEhxvBKI1eO4l+A3UbqWlBKyncfvpKBqY
 yHTBIOgF5QdtUMVSI0/hb64nzmOGHLAWxQoCZssvSFEV6P+jodrqGGayxvbM+6rU
 YR2w2omh+6UkacQvjyVWGehBHiYCECfl0kk9XmPVkIGgHmOdgvkv1/MMbPeEcoXv
 z2YGcgbOIBpNrLcgTev4
 =fKdg
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A few last-minute fixes for 3.12-rc1.  All patches are driver
  specific.

   - HD-audio fixes: MacBook 6,1/6,2 speaker fix, ASUS TX300 dock
     speaker fix, Toshiba Satellite irq fix, Haswell HDMI audio
     cleanups)

   - ASoC fixes: atmel irq fix, fsl DT fix, mc13783 spi fix, kirkwood
     compatible string change, etc"

* tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: mc13783: add spi errata fix
  ASoC: rsnd: fixup flag name of rsnd_scu_platform_info
  ALSA: hda - Add CS4208 codec support for MacBook 6,1 and 6,2
  ALSA: hda - Add Toshiba Satellite C870 to MSI blacklist
  ASoC: fsl_spdif: Select regmap-mmio
  ALSA: hda - unmute pin amplifier in infoframe setup for Haswell
  ALSA: hda - define is_haswell() to check if a display audio codec is Haswell
  ALSA: hda - Add dock speaker support for ASUS TX300
  ASoC: kirkwood: change the compatible string of the kirkwood-i2s driver
  ASoC: atmel: disable error interrupt
  ASoC: fsl: imx-audmux: Do not call imx_audmux_parse_dt_defaults() on non-dt kernel
2013-09-12 08:52:41 -07:00
Mark Brown 2ae2caff83 Merge remote-tracking branch 'asoc/fix/rsnd' into asoc-linus 2013-09-11 11:17:17 +01:00
Mark Brown bf612730bf Merge remote-tracking branch 'asoc/fix/mc13783' into asoc-linus 2013-09-11 11:17:16 +01:00
Mark Brown e695e7a47d Merge remote-tracking branch 'asoc/fix/kirkwood' into asoc-linus 2013-09-11 11:17:16 +01:00
Mark Brown c34c0d7684 Merge remote-tracking branch 'asoc/fix/fsl' into asoc-linus 2013-09-11 11:17:15 +01:00
Steffen Trumtrar 9f6f0afbb9 ASoC: mc13783: add spi errata fix
The MC13783 Chip Errata, Rev. 4 says, that depending on SPI clock
and main audio clock speed, the Audio Codec or Stereo DAC do sometimes
not start when programmed to do so. This is due to an internal clock
timing issue related to the loading of the SPI bits into the audio block.

On an i.MX27 based system, this issue lead to switched audio channels under
certain circumstances: RTC + Touch + Audio are used and loaded at startup.

The mentioned workaround of writing registers 40 and 41 two times is implemented
here.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-11 11:16:48 +01:00
Kuninori Morimoto 34e4447515 ASoC: rsnd: fixup flag name of rsnd_scu_platform_info
it should be *USE*, not *USB*

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-09 16:06:20 +01:00
Mark Brown 4345adf92d ASoC: fsl_spdif: Select regmap-mmio
The S/PDIF driver needs regmap so select it to make sure it gets
included in the build.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-08 18:21:18 +01:00
Thomas Petazzoni d098b2f0cf ASoC: kirkwood: change the compatible string of the kirkwood-i2s driver
The compatible string of the kirkwood-i2s driver was chosen as
"marvell,mvebu-audio". Using such a compatible string is not a good
idea, since "mvebu" is the name of a large family of SOCs, in which
new, unknown SOCs will be coming in the future. It is therefore
impossible to know what will be evolutions of this hardware block in
the next generations of the SOCs. For this reason, the recommandation
for compatible strings of on-SOCs devices has always been to use the
name of the oldest SOC that has the hardware block. New SOCs that have
an exactly compatible hardware block can reference it using the same
compatible string. See [1], [2] and [3] for various cases were this
suggestion was made, including from Rob Herring, a Device Tree binding
maintainer.

As an example, there are already small differences between current
generations:

 * On Kirkwood, only one interrupt is used for audio.
 * On Dove, two interrupts are used, one for audio data and one for
   error reporting.

In the near future, I'll be adding audio support to Armada 370, which
allows has the same hardware block (but maybe with minor variants).

Therefore, this patch changes the driver to accept
"marvell,kirkwood-audio" and "marvell,dove-audio" as compatible
strings instead of the too-generic "marvell,mvebu-audio". The reason
for the two different compatible strings is the difference in the
number of interrupts used by the two SOCs for audio.

This Device Tree binding has never been part of a Linux kernel stable
release so far, so it can be changed now without breaking backward
compatibility.

[1] http://lists.infradead.org/pipermail/linux-mtd/2012-March/040417.html
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2013-April/161065.html
[3] http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/087702.html

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-06 10:29:58 +01:00
Linus Torvalds 00341b5301 Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
 "Highlights:

   - OF and ACPI helpers are now included in the core, and not in
     external files anymore.  This removes dependency problems for
     modules and is cleaner, in general.
   - mv64xxx-driver gains fifo usage to support mv78230
   - imx-driver overhaul to support VF610
   - various cleanups, most notably related to devm_* and CONFIG_PM
     usage
   - driver bugfixes and smaller feature additions"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (51 commits)
  i2c: rcar: add rcar-H2 support
  i2c: sirf: retry 3 times as sometimes we get random noack and timeout
  i2c: sirf: support reverse direction of address
  i2c: sirf: fix the typo for setting bitrate to less than 100k
  i2c: sirf: we need to wait I2C_RESET status in resume
  i2c: sirf: reset i2c controller early after we get a noack
  i2c: designware: get SDA hold time, HCNT and LCNT configuration from ACPI
  i2c: designware: make HCNT/LCNT values configurable
  i2c: mpc: cleanup clock API use
  i2c: pnx: fix error return code in i2c_pnx_probe()
  i2c: ismt: add error return code in probe()
  i2c: mv64xxx: fix typo in binding documentation
  i2c: imx: use exact SoC revision to document binding
  i2c: move ACPI helpers into the core
  i2c: move OF helpers into the core
  i2c: mv64xxx: Fix timing issue on Armada XP (errata FE-8471889)
  i2c: mv64xxx: Add I2C Transaction Generator support
  i2c: powermac: fix return path on error
  Documentation: i2c: Fix example in instantiating-devices
  i2c: tiny-usb: do not use stack as URB transfer_buffer
  ...
2013-09-05 09:31:03 -07:00
Linus Torvalds 27703bb4a6 PTR_RET() is a weird name, and led to some confusing usage. We ended
up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages.
 
 This has been sitting in linux-next for a whole cycle.
 
 Thanks,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSJo+1AAoJENkgDmzRrbjxIC4QALJK95o8AUXuwUkl+2fmFkUt
 hh2/PJ1vDYgk4Xt0J6hyoK7XMa0H1RkbBrROuDdsBnorMFpEsGcgdkUZte9ufoAS
 97Bg+7N0KPbTB/S8vOwtW1vbERTJIVPN2uf6h1Wqm9Xc2puCh3HbMMr1AWMGu0WQ
 NqY5+Zz8zecy1UOrMhEP6H1CjeQcL1w1DO6YM5ydeqlKNzAz+JMfDXriLPDwiE7+
 XFPDF/O3Vtd2ckA7L70Lio7hfHwxV5U4WwFVfiwls98XB4jcZqDKIoh1r8z4SRgR
 +0Rae2DN3BaOabGMr//5XdrzQVpwJTh5m2w8BAOHJvCJ9HR7Sq29UIN4u+TowZBy
 L2xYo4dvFxkympwu5zEd3c7vHYWKIaqmSq5PIjr4gF/uIo2OeOTrpPIK782ZEYb7
 e+qUgOEM05V9AmQZCrSZeP9u474Sj8ow3sCtWxfdRtwNfoEIcUXsNNJd/zDHlVtW
 cEtXqc2xXIpcuUJQWlSaGp8fmRQjVZPzrLKYLM2m39ZcOOJbf5rzQAYS7hHPosIa
 SK+YVux/+Zzi+Xo/vXq1OlM/SruCr5S7JOgCxLowoQ88vupgXME6uPyC8EO+QQ50
 GsrHes5ZNLbk0uVsfcexIyojkUnyvDmmnDpv+1zdC6RgZLJQn8OXp5yNhHhnhrFT
 BiHX6YFWtDDqRlVv8Q0F
 =LeaW
 -----END PGP SIGNATURE-----

Merge tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull PTR_RET() removal patches from Rusty Russell:
 "PTR_RET() is a weird name, and led to some confusing usage.  We ended
  up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages.

  This has been sitting in linux-next for a whole cycle"

[ There are still some PTR_RET users scattered about, with some of them
  possibly being new, but most of them existing in Rusty's tree too.  We
  have that

      #define PTR_RET(p) PTR_ERR_OR_ZERO(p)

  thing in <linux/err.h>, so they continue to work for now  - Linus ]

* tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  GFS2: Replace PTR_RET with PTR_ERR_OR_ZERO
  Btrfs: volume: Replace PTR_RET with PTR_ERR_OR_ZERO
  drm/cma: Replace PTR_RET with PTR_ERR_OR_ZERO
  sh_veu: Replace PTR_RET with PTR_ERR_OR_ZERO
  dma-buf: Replace PTR_RET with PTR_ERR_OR_ZERO
  drivers/rtc: Replace PTR_RET with PTR_ERR_OR_ZERO
  mm/oom_kill: remove weird use of ERR_PTR()/PTR_ERR().
  staging/zcache: don't use PTR_RET().
  remoteproc: don't use PTR_RET().
  pinctrl: don't use PTR_RET().
  acpi: Replace weird use of PTR_RET.
  s390: Replace weird use of PTR_RET.
  PTR_RET is now PTR_ERR_OR_ZERO(): Replace most.
  PTR_RET is now PTR_ERR_OR_ZERO
2013-09-04 17:31:11 -07:00
Bo Shen e011143454 ASoC: atmel: disable error interrupt
As once the error interrupt is triggered, it can not be cleared.
So, disable it.

No side effect found while testing on sama5d3xek and at91sam9x5ek
boards.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-04 10:47:27 +01:00
Fabio Estevam bae35992af ASoC: fsl: imx-audmux: Do not call imx_audmux_parse_dt_defaults() on non-dt kernel
Booting a mx51babbage board with a non-dt kernel leads to the following crash:

Unable to handle kernel NULL pointer dereference at virtual address 0000001c
pgd = 80004000
[0000001c] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.11.0-next-20130903 #287
task: 9f860000 ti: 9f862000 task.ti: 9f862000
PC is at of_get_next_available_child+0x5c/0x68
LR is at of_get_next_available_child+0x1c/0x68
pc : [<8043ea58>]    lr : [<8043ea18>]    psr: 60000193
sp : 9f863d58  ip : 00000000  fp : 9f863d74
r10: 9f89a010  r9 : 9f862000  r8 : 807bb26c
r7 : 80615d5c  r6 : 00000000  r5 : 60000113  r4 : 00000000
r3 : 00000000  r2 : 808770a4  r1 : 00000011  r0 : 60000113
Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5387d  Table: 90004019  DAC: 00000017
Process swapper/0 (pid: 1, stack limit = 0x9f862240)
Stack: (0x9f863d58 to 0x9f864000)

This is caused by commit 8548a464b9 (ASoC: imx-audmux: Read default
configuration from devicetree).

In order to fix this, add a check for 'of_id' so that
imx_audmux_parse_dt_defaults() only gets called when a dt kernel is running.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-04 00:20:00 +01:00
Mark Brown 5df498a27a Merge remote-tracking branch 'asoc/topic/ssm2602' into tmp 2013-09-01 21:15:59 +01:00
Mark Brown 90d561bed9 Merge remote-tracking branch 'asoc/topic/fsl' into tmp 2013-09-01 21:15:52 +01:00
Mark Brown 59a3aed73b Merge remote-tracking branch 'asoc/topic/dapm' into tmp 2013-09-01 21:15:50 +01:00
Fabio Estevam a90e6053ba ASoC: mxs-sgtl5000: Configure the dai_links as unidirectional
On a mx28 board, running "aplay -l" and "arecord -l" results in the following:

$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: mxssgtl5000 [mxs_sgtl5000], device 0: Playback sgtl5000-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: mxssgtl5000 [mxs_sgtl5000], device 1: Capture sgtl5000-1 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0

$ arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: mxssgtl5000 [mxs_sgtl5000], device 0: Playback sgtl5000-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: mxssgtl5000 [mxs_sgtl5000], device 1: Capture sgtl5000-1 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0

,which is not correct because we got a capture device listed in aplay and a
playback device listed in arecord.

On mx28 there are two serial audio interface ports (SAIF0 and SAIF1) and each
one of them are unidirectional.

Allow to specify a dai link as 'playback_only' or 'capture_only', which suits
well for this case.

After this change we can correctly report the capabilities as follows:

$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: mxssgtl5000 [mxs_sgtl5000], device 0: HiFi Playback sgtl5000-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0

$ arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: mxssgtl5000 [mxs_sgtl5000], device 1: HiFi Capture sgtl5000-1 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0

Also tested playback and capture on the mx28evk board.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-01 16:29:27 +01:00
Fabio Estevam d6bead020d ASoC: soc-pcm: Allow to specify unidirectional dai_link
Add 'playback_only' and 'capture_only' fields that can be used for specifying
that a dai_link has a unidirectional capability.

The motivation for this is for the cases of systems, such as Freescale MX28,
that has two unidirectional DAIs.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-01 16:29:27 +01:00
Mark Brown 6b4c80f947 ASoC: fsl_spdif: Staticse non-exported symbols
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Nicolin Chen <B42378@freescale.com>
2013-09-01 12:52:25 +01:00
Lars-Peter Clausen 9d863b88ec ASoC: ssm2602: Fix cache sync
The ssm2602 uses regmap for caching not soc-cache, so we need to use
regcache_sync() instead of snd_soc_cache_sync().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-31 18:18:00 +01:00
Nicolin Chen 8626bdf05e ASoC: fsl: Add one blank space after ':=' in Makefile
There is a blank space missing between ':=' and 'imx-spdif.o', thus add it.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-30 23:01:18 +01:00
Nicolin Chen 8a309d71ed ASoC: fsl: Add wrapping for dev_dbg() in fsl_spdif.c
Add wrapping '\n' for dev_dbg() in fsl_spdif.c

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-30 23:01:18 +01:00
Bard Liao 246693ba7b ASoC: rt5640: change widget sequence for depop
Signed-off-by: Bard Liao <bardliao@realtek.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-30 16:43:23 +01:00
Mark Brown 54ac045026 Merge remote-tracking branch 'asoc/topic/rt5640' into asoc-dapm 2013-08-30 16:43:04 +01:00
Lars-Peter Clausen 2daabd7848 ASoC: dapm: Fix auto-disable for inverted controls
We need to make sure that the control's cached value is initialized to the same
value as the control's widget->on_val. Otherwise updates might be lost.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-30 16:41:06 +01:00
Mark Brown 6d52825fd4 Merge remote-tracking branch 'asoc/topic/wm8904' into tmp 2013-08-30 11:04:35 +01:00
Mark Brown c85fa502ef Merge remote-tracking branch 'asoc/topic/samsung' into tmp 2013-08-30 11:04:29 +01:00
Mark Brown 52b3a88439 Merge remote-tracking branch 'asoc/topic/kirkwood' into tmp 2013-08-30 11:04:24 +01:00
Mark Brown 0f97b69a9f Merge remote-tracking branch 'asoc/topic/fsl' into tmp 2013-08-30 11:04:23 +01:00
Mark Brown 812e6bbf2c Merge remote-tracking branch 'asoc/topic/fsi' into tmp 2013-08-30 11:04:22 +01:00
Mark Brown 429aff7082 Merge remote-tracking branch 'asoc/topic/ep93xx' into tmp 2013-08-30 11:04:21 +01:00
Mark Brown c5b47442e5 Merge remote-tracking branch 'asoc/topic/designware' into tmp 2013-08-30 11:04:20 +01:00
Mark Brown c79c33af8f Merge remote-tracking branch 'asoc/topic/core' into tmp 2013-08-30 11:04:14 +01:00
Fabio Estevam 2f82cdbafd ASoC: fsl: Drop SND_SOC_FSL_UTILS from SND_SOC_IMX_SPDIF
SND_SOC_FSL_UTILS is only used by PowerPC machines, so let's drop it in the
i.mx case.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-30 11:00:55 +01:00
Tomasz Figa 9b9ae16a97 ASoC: Samsung: Do not queue cyclic buffers multiple times
The legacy S3C-DMA API required every period of a cyclic buffer to be
queued separately. After conversion of Samsung ASoC to Samsung DMA
wrappers somebody made an assumption that the same is needed for DMA
engine API, which is not true.

In effect, Samsung ASoC DMA code was queuing the whole cyclic buffer
multiple times with a shift of one period per iteration, leading to:
  a) severe memory waste - up to 13x times more DMA transfer descriptors
     are allocated than needed,
  b) possible memory corruption, because further cyclic buffers were out
     of the original buffers, due to the offset.

This patch fixes this problem by making the legacy S3C-DMA API use the
same semantics as DMA engine (the whole cyclic buffer is enqueued at
once) and modifying users of Samsung DMA wrappers in cyclic mode to
behave appropriately.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-29 17:31:02 +01:00
Fabio Estevam ba1fb69508 ASoC: ep93xx-i2s: Remove unnecessary dev_set_drvdata()
Driver core clears the driver data to NULL after device_release or on probe
failure, so just remove it from here.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-29 13:20:33 +01:00
Fabio Estevam e925a6b1b6 ASoC: designware_i2s: Remove unnecessary dev_set_drvdata()
Driver core clears the driver data to NULL after device_release or on probe
failure, so just remove it from here.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-29 13:18:32 +01:00
Wei Yongjun bfd7d1aa3b ASoC: fsl_spdif: remove redundant dev_err call in fsl_spdif_probe()
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-29 13:17:52 +01:00
Nicolin Chen 2a956ec04b ASoC: fsl: Add S/PDIF machine driver
This patch implements a device-tree-only machine driver for Freescale
i.MX series Soc. It works with spdif_transmitter/spdif_receiver and
fsl_spdif.c drivers.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-29 13:15:26 +01:00
Jean-Francois Moine 446a3bd432 ASoc: kirkwood: Use the Kirkwood audio driver in Dove boards
This patch permits the generation of the Kirkwood audio driver which
may be used in the Dove boards.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-27 22:01:59 +01:00
Lars-Peter Clausen 824ef826f3 ASoC: Pass card instead of dapm context to snd_soc_dapm_new_widgets()
snd_soc_dapm_new_widgets() works on the ASoC card as a whole not on a specific
DAPM context. The DAPM context that is passed as the parameter is only used to
look up the pointer to the card. This patch updates the signature of
snd_soc_dapm_new_widgets() to take the card directly.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-27 15:41:16 +01:00
Mark Brown 38f7d75edc Merge remote-tracking branch 'asoc/topic/dapm' into asoc-core 2013-08-27 15:40:47 +01:00
Mark Brown c22cff947a Merge remote-tracking branch 'asoc/topic/tlv320aic32x4' into asoc-core 2013-08-27 15:40:16 +01:00
Mark Brown dc1632321b Merge remote-tracking branch 'asoc/topic/dmic' into asoc-core 2013-08-27 15:40:03 +01:00
Lars-Peter Clausen 8c193b8dce ASoC: Move call to snd_soc_dapm_new_widgets() after snd_soc_dapm_auto_nc_codec_pins()
Call snd_soc_dapm_new_widgets() before the auto non-connected pins have been
marked as not connected will power the system under the assumption that those
pins are connected. Once the pins have been marked as disconnected the system
there will be an additional power run. This can cause unnecessary power
transitions. Calling snd_soc_dapm_new_widgets() only after the pins have been
marked as non-connected avoids this.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-27 15:39:43 +01:00
Lars-Peter Clausen 4b52fa211a ASoC: Call snd_soc_dapm_new_widgets() only once during card initialization
Each time snd_soc_dapm_new_widgets() is called it will instantiate all the
widgets and routes that have been added so far and then power them. Doing this
multiple times before the card is fully initialized and all widgets have been
added can cause unnecessary and even invalid power state transitions which can
result in extra register writes and and also might cause clicks and pops.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-27 15:38:18 +01:00
Lars-Peter Clausen 148663074c ASoC: jack: Remove unnecessary call to snd_soc_dapm_new_widgets()
snd_soc_jack_add_pins() does not create any new DAPM widgets, so there is no
need to call snd_soc_dapm_new_widgets().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-27 15:37:33 +01:00
Lars-Peter Clausen 318ee162c8 ASoC: wm8904: Remove unnecessary call to snd_soc_dapm_new_widgets()
The core will call snd_soc_dapm_new_widgets() once all components of the card
have been initialized, so there is no need to do this manually in the driver.
Calling it earlier also might result in a partially instantiated system being
powered up which cause undesired side effects.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-27 15:36:27 +01:00
Lars-Peter Clausen aac97b5fd9 ASoC: tlv320aic32x4: Convert table based control and DAPM setup
Let the core take care of instantiating the controls and DAPM widgets and
routes, this makes the code a bit shorter.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-27 15:33:34 +01:00