* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
trivial: fix typo in aic7xxx comment
trivial: fix comment typo in drivers/ata/pata_hpt37x.c
trivial: typo in kernel-parameters.txt
trivial: fix typo in tracing documentation
trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c
trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c
trivial: remove unnecessary semicolons
trivial: Fix duplicated word "options" in comment
trivial: kbuild: remove extraneous blank line after declaration of usage()
trivial: improve help text for mm debug config options
trivial: doc: hpfall: accept disk device to unload as argument
trivial: doc: hpfall: reduce risk that hpfall can do harm
trivial: SubmittingPatches: Fix reference to renumbered step
trivial: fix typos "man[ae]g?ment" -> "management"
trivial: media/video/cx88: add __init/__exit macros to cx88 drivers
trivial: fix typo in CONFIG_DEBUG_FS in gcov doc
trivial: fix missing printk space in amd_k7_smp_check
trivial: fix typo s/ketymap/keymap/ in comment
trivial: fix typo "to to" in multiple files
trivial: fix typos in comments s/DGBU/DBGU/
...
It's possible that this struct will outlive the filp to which it is
attached. If it does and it needs to do some work on the inode, then
it'll need a reference.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
...rather than a write lock. It doesn't change the list so a read lock
should be sufficient.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
It's set on oplock break but nothing ever looks at it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs_posix_open takes a "poplock" argument that's intended to be used in
the actual posix open call to set the "Flags" field. It ignores this
value however and declares an "oplock" parameter on the stack that it
passes uninitialized to the CIFSPOSIXOpen function. Not only does this
mean that the oplock request flags are bogus, but the result that's
expected to be in that variable is unchanged.
Fix this, and also clean up the type of the oplock parameter used. Since
it's expected to be __u32, we should use that everywhere and not
implicitly cast it from a signed type.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
commit ac68392460 ("[CIFS] Allow raw
ntlmssp code to be enabled with sec=ntlmssp") added a new bit to the
allowed security flags mask but seems to have inadvertently removed
Lanman security from the allowed flags. Add it back.
CC: Stable <stable@kernel.org>
Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
There's a large cut and paste chunk of code in smb_init and
small_smb_init to handle reconnects. Break it out into a separate
function, clean it up and have both routines call it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Currently, cifs_close() tries to wait until all I/O is complete and then
frees the file private data. If I/O does not completely in a reasonable
amount of time it frees the structure anyway, leaving a potential use-
after-free situation.
This patch changes the wrtPending counter to a complete reference count and
lets the last user free the structure.
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Tested-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Right now, the GlobalOplock_Q is protected by the GlobalMid_Lock. That
lock is also used for completely unrelated purposes (mostly for managing
the global mid queue). Give the list its own dedicated spinlock
(cifs_oplock_lock) and rename the list to cifs_oplock_list to
eliminate the camel-case.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Minor nit: we already have a tcon pointer so we don't need to
dereference cifs_sb again.
Also initialize the vars in the declaration.
Reported-by: Peter Staubach <staubach@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Make it easier on the upcall program by adding ':' delimiters between
each group of hex digits.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
One more try..
It seems there is a regression that got introduced while Jeff fixed
all the mount/umount races. While attempting to find whether a tcp
session is already existing, we were not checking whether the "port"
used are the same. When a second mount is attempted with a different
"port=" option, it is being ignored. Because of this the cifs mounts
that uses a SSH tunnel appears to be broken.
Steps to reproduce:
1. create 2 shares
# SSH Tunnel a SMB session
2. ssh -f -L 6111:127.0.0.1:445 root@localhost "sleep 86400"
3. ssh -f -L 6222:127.0.0.1:445 root@localhost "sleep 86400"
4. tcpdump -i lo 6111 &
5. mkdir -p /mnt/mnt1
6. mkdir -p /mnt/mnt2
7. mount.cifs //localhost/a /mnt/mnt1 -o username=guest,ip=127.0.0.1,port=6111
#(shows tcpdump activity on port 6111)
8. mount.cifs //localhost/b /mnt/mnt2 -o username=guest,ip=127.0.0.1,port=6222
#(shows tcpdump activity only on port 6111 and not on 6222
Fix by adding a check to compare the port _only_ if the user tries to
override the tcp port with "port=" option, before deciding that an
existing tcp session is found. Also, clean up a bit by replacing
if-else if by a switch statment while at it as suggested by Jeff.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
in function calc_ntlmv2_hash memory is not released.
1. If in the line 333 we successfully allocate memory and assign it to
pctxt variable:
pctxt = kmalloc(sizeof(struct HMACMD5Context), GFP_KERNEL);
then we go to line 376 and exit wihout releasing memory pointed to by pctxt
variable.
Add a memory releasing for pctxt variable before exit from function
calc_ntlmv2_hash.
Signed-off-by: Alexander Strakh <strakh@ispras.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
memory allocation may fail, prevent a NULL dereference
Pointed out by Roel Kluin
CC: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Check whether index is within bounds before testing the element.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Since forceuid is the default, we now need to show when it's disabled.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
This patch fixes the regression reported here:
http://bugzilla.kernel.org/show_bug.cgi?id=13861
commit 4ae1507f6d changed the default
behavior when the uid= or gid= option was specified for a mount. The
existing behavior was to always clobber the ownership information
provided by the server when these options were specified. The above
commit changed this behavior so that these options simply provided
defaults when the server did not provide this information (unless
"forceuid" or "forcegid" were specified)
This patch reverts this change so that the default behavior is restored.
It also adds "noforceuid" and "noforcegid" options to make it so that
ownership information from the server is preserved, even when the mount
has uid= or gid= options specified.
It also adds a couple of printk notices that pop up when forceuid or
forcegid options are specified without a uid= or gid= option.
Reported-by: Tom Chiverton <bugzilla.kernel.org@falkensweb.com>
Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
If the referral is malformed or the hostname can't be resolved, then
the current code generates an oops. Fix it to handle these errors
gracefully.
Reported-by: Sandro Mathys <sm@sandro-mathys.ch>
Acked-by: Igor Mammedov <niallain@gmail.com>
CC: Stable <stable@kernel.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
This off-by-one bug causes sendfile() to not work properly. When a task
calls sendfile() on a file on a CIFS filesystem, the syscall returns -1
and sets errno to EOVERFLOW.
do_sendfile uses s_maxbytes to verify the returned offset of the file.
The problem there is that this value is cast to a signed value (loff_t).
When this is done on the s_maxbytes value that cifs uses, it becomes
negative and the comparisons against it fail.
Even though s_maxbytes is an unsigned value, it seems that it's not OK
to set it in such a way that it'll end up negative when it's cast to a
signed value. These casts happen in other codepaths besides sendfile
too, but the VFS is a little hard to follow in this area and I can't
be sure if there are other bugs that this will fix.
It's not clear to me why s_maxbytes isn't just declared as loff_t in the
first place, but either way we still need to fix these values to make
sendfile work properly. This is also an opportunity to replace the magic
bit-shift values here with the standard #defines for this.
This fixes the reproducer program I have that does a sendfile and
will probably also fix the situation where apache is serving from a
CIFS share.
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
A recent regression when dealing with older servers. This bug was
introduced when we made serverino the default...
When the server can't provide inode numbers, disable it for the mount.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
...otherwise, we'll leak this memory if we have to reconnect (e.g. after
network failure).
Signed-off-by: Jeff Layton <jlayton@redhat.com>
CC: Stable <stable@kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs: when ATTR_READONLY is set, only clear write bits on non-directories
On windows servers, ATTR_READONLY apparently either has no meaning or
serves as some sort of queue to certain applications for unrelated
behavior. This MS kbase article has details:
http://support.microsoft.com/kb/326549/
Don't clear the write bits directory mode when ATTR_READONLY is set.
Reported-by: pouchat@peewiki.net
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs: remove cifsInodeInfo->inUse counter
It was purported to be a refcounter of some sort, but was never
used that way. It never served any purpose that wasn't served equally well
by the I_NEW flag.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs: convert cifs_get_inode_info and non-posix readdir to use cifs_iget
Rather than allocating an inode and filling it out, have
cifs_get_inode_info fill out a cifs_fattr and call cifs_iget. This means
a pretty hefty reorganization of cifs_get_inode_info.
For the readdir codepath, add a couple of new functions for filling out
cifs_fattr's from different FindFile response infolevels.
Finally, remove cifs_new_inode since there are no more callers.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs: add and use CIFSSMBUnixSetFileInfo for setattr calls
When there's an open filehandle, SET_FILE_INFO is apparently preferred
over SET_PATH_INFO. Add a new variant that sets a FILE_UNIX_INFO_BASIC
infolevel via SET_FILE_INFO and switch cifs_setattr_unix to use the
new call when there's an open filehandle available.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs: make a separate function for filling out FILE_UNIX_BASIC_INFO
The SET_FILE_INFO variant will need to do the same thing here. Break
this code out into a separate function that both variants can call.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs: rename CIFSSMBUnixSetInfo to CIFSSMBUnixSetPathInfo
...in preparation of adding a SET_FILE_INFO variant.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs: add pid of initiating process to spnego upcall info
This will allow the upcall to poke in /proc/<pid>/environ and get
the value of the $KRB5CCNAME env var for the process.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs: add new cifs_iget function and convert unix codepath to use it
In order to unify some codepaths, introduce a common cifs_fattr struct
for storing inode attributes. The different codepaths (unix, legacy,
normal, etc...) can fill out this struct with inode info. It can then be
passed as an arg to a common set of routines to get and update inodes.
Add a new cifs_iget function that uses iget5_locked to identify inodes.
This will compare inodes based on the uniqueid value in a cifs_fattr
struct.
Rather than filling out an already-created inode, have
cifs_get_inode_info_unix instead fill out cifs_fattr and hand that off
to cifs_iget. cifs_iget can then properly look for hardlinked inodes.
On the readdir side, add a new cifs_readdir_lookup function that spawns
populated dentries. Redefine FILE_UNIX_INFO so that it's basically a
FILE_UNIX_BASIC_INFO that has a few fields wrapped around it. This
allows us to more easily use the same function for filling out the fattr
as the non-readdir codepath.
With this, we should then have proper hardlink detection and can
eventually get rid of some nasty CIFS-specific hacks for handing them.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Fixes a regression caused by commit a6ce4932fb
When this lock was converted to a mutex, the locks were turned into
unlocks and vice-versa.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Jeff's previous patch which removed the unneeded rw/ro
parsing can cause a minor warning in dmesg (about the
unknown rw or ro mount option) at mount time. This
patch makes cifs ignore them in kernel to remove the warning
(they are already handled in the mount helper and VFS).
Signed-off-by: Steve French <sfrench@us.ibm.com>
The lock_kernel call moved into the fs for umount_begin
is not needed. This adds a check to make sure we don't
call umount_begin twice on the same fs.
umount_begin for cifs is probably not needed and
may eventually be able to be removed, but in
the meantime this smaller patch is safe and
gets rid of the bkl from this path which provides
some benefit.
Acked-by: Jeff Layton <redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
FreeXid() along with freeing Xid does add a cifsFYI debug message that
prints rc (return code) as well. In some code paths where we set/return
error code after calling FreeXid(), incorrect error code is being
printed when cifsFYI is enabled.
This could be misleading in few cases. For eg.
In cifs_open() if cifs_fill_filedata() returns a valid pointer to
cifsFileInfo, FreeXid() prints rc=-13 whereas 0 is actually being
returned. Fix this by setting rc before calling FreeXid().
Basically convert
FreeXid(xid); rc = -ERR;
return -ERR; => FreeXid(xid);
return rc;
[Note that Christoph would like to replace the GetXid/FreeXid
calls, which are primarily used for debugging. This seems
like a good longer term goal, but although there is an
alternative tracing facility, there are no examples yet
available that I know of that we can use (yet) to
convert this cifs function entry/exit logging, and for
creating an identifier that we can use to correlate
all dmesg log entries for a particular vfs operation
(ie identify all log entries for a particular vfs
request to cifs: e.g. a particular close or read or write
or byte range lock call ... and just using the thread id
is harder). Eventually when a replacement
for this is available (e.g. when NFS switches over and various
samples to look at in other file systems) we can remove the
GetXid/FreeXid macro but in the meantime multiple people
use this run time configurable logging all the time
for debugging, and Suresh's patch fixes a problem
which made it harder to notice some low
memory problems in the log so it is worthwhile
to fix this problem until a better logging
approach is able to be used]
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Also removes obsolete distinction between rawntlmssp and ntlmssp (in asn/SPNEGO)
since as jra noted we can always send raw ntlmssp in session setup now.
remove check for experimental runtime flag (/proc/fs/cifs/Experimental) in
ntlmssp path.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs: remove rw/ro options
These options are handled at the VFS layer. They only ever set the
option in the smb_vol struct. Nothing was ever done with them afterward
anyway.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs: fix problems with earlier patches
cifs_show_address hasn't been introduced yet, and fix a typo that was
silently fixed by a later patch in the series.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
This patch has CIFS look for a '%' in an IPv6 address. If one is
present then it will try to treat that value as a numeric interface
index suitable for stuffing into the sin6_scope_id field.
This should allow people to mount servers on IPv6 link-local addresses.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: David Holder <david@erion.co.uk>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Noticed this when tree connect timed out (due to Samba server crash) -
we try to send a tree disconnect for a tid that does not exist
since we don't have a valid tree id yet. This checks that the
session is valid before sending the tree disconnect to handle
this case.
Signed-off-by: Steve French <sfrench@us.ibm.com>
Move address display into a new function and display the scopeid as part
of the address in /proc/mounts.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
...to consolidate some logic used in more than one place.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
show_options is always called with the namespace_sem held. Therefore we
don't need to worry about the vfsmount being NULL, or it vanishing while
the function is running. By the same token, there's no need to worry
about the superblock, tcon, smb or tcp sessions being NULL on entry.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Move BKL into ->put_super from the only caller. A couple of
filesystems had trivial enough ->put_super (only kfree and NULLing of
s_fs_info + stuff in there) to not get any locking: coda, cramfs, efs,
hugetlbfs, omfs, qnx4, shmem, all others got the full treatment. Most
of them probably don't need it, but I'd rather sort that out individually.
Preferably after all the other BKL pushdowns in that area.
[AV: original used to move lock_super() down as well; these changes are
removed since we don't do lock_super() at all in generic_shutdown_super()
now]
[AV: fuse, btrfs and xfs are known to need no damn BKL, exempt]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This option was never used to my knowledge. Remove it before someone
does...
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
When you look in /proc/mounts, the address of the server gets displayed
as "addr=". That's really a better option to use anyway since it's more
generic. What if we eventually want to support non-IP transports? It
also makes CIFS option consistent with the NFS option of the same name.
Begin the migration to that option name by adding an alias for ip=
called addr=.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
We have a bit of a problem with the uid= option. The basic issue is that
it means too many things and has too many side-effects.
It's possible to allow an unprivileged user to mount a filesystem if the
user owns the mountpoint, /bin/mount is setuid root, and the mount is
set up in /etc/fstab with the "user" option.
When doing this though, /bin/mount automatically adds the "uid=" and
"gid=" options to the share. This is fortunate since the correct uid=
option is needed in order to tell the upcall what user's credcache to
use when generating the SPNEGO blob.
On a mount without unix extensions this is fine -- you generally will
want the files to be owned by the "owner" of the mount. The problem
comes in on a mount with unix extensions. With those enabled, the
uid/gid options cause the ownership of files to be overriden even though
the server is sending along the ownership info.
This means that it's not possible to have a mount by an unprivileged
user that shows the server's file ownership info. The result is also
inode permissions that have no reflection at all on the server. You
simply cannot separate ownership from the mode in this fashion.
This behavior also makes MultiuserMount option less usable. Once you
pass in the uid= option for a mount, then you can't use unix ownership
info and allow someone to share the mount.
While I'm not thrilled with it, the only solution I can see is to stop
making uid=/gid= force the overriding of ownership on mounts, and to add
new mount options that turn this behavior on.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
For IPv6 the userspace mount helper sends an address in the "ip="
option. This check fails if the length is > 35 characters. I have no
idea where the magic 35 character limit came from, but it's clearly not
enough for IPv6. Fix it by making it use the INET6_ADDRSTRLEN #define.
While we're at it, use the same #define for the address length in SPNEGO
upcalls.
Reported-by: Charles R. Anderson <cra@wpi.edu>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Thus spake Christoph:
"But this whole set_cifs_acl function is a real mess anyway and needs
some splitting up."
With this change too, it's possible to call acl_to_uid_mode() with a
NULL inode pointer. That (or something close to it) will eventually be
necessary when cifs_get_inode_info is reorganized.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The current cifs_iget isn't suitable for anything but the root inode.
Rename it with a more appropriate name.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The callers primarily end up converting the args from le anyway. Also,
most of the callers end up needing to add an offset to the result. The
exception to these rules is cnvrtDosCifsTm, but there are no callers of
that function, so we might as well remove it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
...and just have the function call le64_to_cpu.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The current default file mode is 02767 and dir mode is 0777. This is
extremely "loose". Given that CIFS is a single-user protocol, these
permissions allow anyone to use the mount -- in effect, giving anyone on
the machine access to the credentials used to mount the share.
Change this by making the default permissions restrict write access to
the default owner of the mount. Give read and execute permissions to
everyone else. These are the same permissions that VFAT mounts get by
default so there is some precedent here.
Note that this patch also removes the mandatory locking flags from the
default file_mode. After having looked at how these flags are used by
the kernel, I don't think that keeping them as the default offers any
real benefit. That flag combination makes it so that the kernel enforces
mandatory locking.
Since the server is going to do that for us anyway, I don't think we
want the client to enforce this by default on applications that just
want advisory locks. Anyone that does want this behavior can always
enable it by setting the file_mode appropriately.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
There's no reason to limit the size of a symlink that we can read to
4000 bytes. That may be nowhere near PATH_MAX if the server is sending
UCS2 strings. CIFS should be able to read in a symlink up to the size of
the buffer. The size of the header has already been accounted for when
creating the slabcache, so CIFSMaxBufSize should be the correct size to
pass in.
Fixes samba bug #6384.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Small change (mostly formatting) to limit lookup based open calls to
file create only.
After discussion yesteday on samba-technical about the posix lookup
regression, and looking at a problem with cifs posix open to one
particular Samba version, Jeff and JRA realized that Samba server's
behavior changed in this area (posix open behavior on files vs.
directories). To make this behavior consistent, JRA just made a
fix to Samba server to alter how it handles open of directories (now
returning the equivalent of EISDIR instead of success). Since we don't
know at lookup time whether the inode is a directory or file (and
thus whether posix open will succeed with most current Samba server),
this change avoids the posix open code on lookup open (just issues
posix open on creates). This gets the semantic benefits we want
(atomicity, posix byte range locks, improved write semantics on newly
created files) and file create still is fast, and we avoid the problem
that Jeff noticed yesterday with "openat" (and some open directory
calls) of non-cached directories to one version of Samba server, and
will work with future Samba versions (which include the fix jra just
pushed into Samba server). I confirmed this approach with jra
yesterday and with Shirish today.
Posix open is only called (at lookup time) for file create now.
For opens (rather than creates), because we do not know if it
is a file or directory yet, and current Samba no longer allows
us to do posix open on dirs, we could end up wasting an open call
on what turns out to be a dir. For file opens, we wait to call posix
open till cifs_open. It could be added here (lookup) in the future
but the performance tradeoff of the extra network request when EISDIR
or EACCES is returned would have to be weighed against the 50%
reduction in network traffic in the other paths.
Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Tested-by: Jeff Layton <jlayton@redhat.com>
CC: Jeremy Allison <jra@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Posix open code was not properly adding the file to the
list of open files. Fix allocating cifsFileInfo
more than once, and adding twice to flist and tlist.
Also fix mode setting to be done in one place in these
paths.
Signed-off-by: Steve French <sfrench@us.ibm.com>
Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Tested-by: Jeff Layton <jlayton@redhat.com>
Tested-by: Luca Tettamanti <kronos.it@gmail.com>
This is the third respin of the patch posted yesterday to fix the error
handling in cifs_follow_symlink. It also includes a fix for a bogus NULL
pointer check in CIFSSMBQueryUnixSymLink that Jeff Moyer spotted.
It's possible for CIFSSMBQueryUnixSymLink to return without setting
target_path to a valid pointer. If that happens then the current value
to which we're initializing this pointer could cause an oops when it's
kfree'd.
This patch is a little more comprehensive than the last patches. It
reorganizes cifs_follow_link a bit for (hopefully) better readability.
It should also eliminate the uneeded allocation of full_path on servers
without unix extensions (assuming they can get to this point anyway, of
which I'm not convinced).
On a side note, I'm not sure I agree with the logic of enabling this
query even when unix extensions are disabled on the client. It seems
like that should disable this as well. But, changing that is outside the
scope of this fix, so I've left it alone for now.
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Christoph Hellwig <hch@inraded.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs_strndup_from_ucs returns NULL on error, not an ERR_PTR
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Remove adding open file entry twice to lists in the file
Do not fill file info twice in case of posix opens and creates
Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
On mount, "sec=ntlmssp" can now be specified to allow
"rawntlmssp" security to be enabled during
CIFS session establishment/authentication (ntlmssp used to
require specifying krb5 which was counterintuitive).
Signed-off-by: Steve French <sfrench@us.ibm.com>
We were not setting the SMB uid in NTLMSSP authenticate
request which could lead to INVALID_PARAMETER error
on 2nd session setup.
Signed-off-by: Steve French <sfrench@us.ibm.com>
The NTLMSSP code was removed from fs/cifs/connect.c and merged
(75% smaller, cleaner) into fs/cifs/sess.c
As with the old code it requires that cifs be built with
CONFIG_CIFS_EXPERIMENTAL, the /proc/fs/cifs/Experimental flag
must be set to 2, and mount must turn on extended security
(e.g. with sec=krb5).
Although NTLMSSP encapsulated in SPNEGO is not enabled yet,
"raw" ntlmssp is common and useful in some cases since it
offers more complete security negotiation, and is the
default way of negotiating security for many Windows systems.
SPNEGO encapsulated NTLMSSP will be able to reuse the same
code.
Signed-off-by: Steve French <sfrench@us.ibm.com>
When multiply mounting from the same client to the same server, with
different userids, we create a vcnum which should be unique if
possible (this is not the same as the smb uid, which is the handle
to the security context). We were not endian converting additional
(beyond the first which is zero) vcnum properly.
CC: Stable <stable@kernel.org>
Acked-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Removes two sparse CHECK_ENDIAN warnings from Jeffs earlier patch,
and removes the dead readlink code (after noting where in
findfirst we will need to add something like that in the future
to handle the newly discovered unexpected error on FindFirst of NTFS symlinks.
Signed-off-by: Steve French <sfrench@us.ibm.com>
The earlier patch to move this code to use the new unicode helpers
assumed that the filename strings would be null terminated. That's not
always the case.
Instead of passing "max_len" to the string converter, pass "min(len,
max_len)", which makes it do the right thing while still keeping the
parser confined to the response. Also fix up the prototypes of this
function and the callers so that max_len is unsigned (like len is).
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
In most cases, cifs_strndup is converting from Unicode (UCS2 / UTF-32) to
the configured local code page for the Linux mount (usually UTF8), so
Jeff suggested that to make it more clear that cifs_strndup is doing
a conversion not just memory allocation and copy, rename the function
to including "from_ucs" (ie Unicode)
Signed-off-by: Steve French <sfrench@us.ibm.com>
Added loop check when mounting DFS tree. mount will fail with
ELOOP if referral walks exceed MAX_NESTED_LINK count.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Having remote dfs root support in cifs_mount, we can
afford to pass into it UNC that is remote.
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Two years ago, when the session setup code in cifs was rewritten and moved
to fs/cifs/sess.c, we were asked to keep the old code for a release or so
(which could be reenabled at runtime) since it was such a large change and
because the asn (SPNEGO) and NTLMSSP code was not rewritten and needed to
be. This was useful to avoid regressions, but is long overdue to be removed.
Now that the Kerberos (asn/spnego) code is working in fs/cifs/sess.c,
and the NTLMSSP code moved (NTLMSSP blob setup be rewritten with the
next patch in this series) quite a bit of dead code from fs/cifs/connect.c
now can be removed.
This old code should have been removed last year, but the earlier krb5
patches did not move/remove the NTLMSSP code which we had asked to
be done first. Since no one else volunteered, I am doing it now.
It is extremely important that we continue to examine the documentation
for this area, to make sure our code continues to be uptodate with
changes since Windows 2003.
Signed-off-by: Steve French <sfrench@us.ibm.com>
...and remove cifs_convertUCSpath. There are no more callers. Also add a
#define for the buffer used in the readdir path so that we don't have so
many magic numbers floating around.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Change CIFSSMBUnixQuerySymLink to use the new unicode helper functions.
Also change the calling conventions so that the allocation of the target
name buffer is done in CIFSSMBUnixQuerySymLink rather than by the caller.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
...and change decode_unicode_ssetup to be a void function. It never
returns an actual error anyway.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
