Commit Graph

215 Commits

Author SHA1 Message Date
Reilly Grant d883f52e1f usb: devio: Add ioctl to disallow detaching kernel USB drivers.
The new USBDEVFS_DROP_PRIVILEGES ioctl allows a process to voluntarily
relinquish the ability to issue other ioctls that may interfere with
other processes and drivers that have claimed an interface on the
device.

This commit also includes a simple utility to be able to test the
ioctl, located at Documentation/usb/usbdevfs-drop-permissions.c

Example (with qemu-kvm's input device):

    $ lsusb
    ...
    Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd

    $ usb-devices
    ...
    C:  #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
    I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=02 Driver=usbhid

    $ sudo ./usbdevfs-drop-permissions /dev/bus/usb/001/002
    OK: privileges dropped!
    Available options:
    [0] Exit now
    [1] Reset device. Should fail if device is in use
    [2] Claim 4 interfaces. Should succeed where not in use
    [3] Narrow interface permission mask
    Which option shall I run?: 1
    ERROR: USBDEVFS_RESET failed! (1 - Operation not permitted)
    Which test shall I run next?: 2
    ERROR claiming if 0 (1 - Operation not permitted)
    ERROR claiming if 1 (1 - Operation not permitted)
    ERROR claiming if 2 (1 - Operation not permitted)
    ERROR claiming if 3 (1 - Operation not permitted)
    Which test shall I run next?: 0

After unbinding usbhid:

    $ usb-devices
    ...
    I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=02 Driver=(none)

    $ sudo ./usbdevfs-drop-permissions /dev/bus/usb/001/002
    ...
    Which option shall I run?: 2
    OK: claimed if 0
    ERROR claiming if 1 (1 - Operation not permitted)
    ERROR claiming if 2 (1 - Operation not permitted)
    ERROR claiming if 3 (1 - Operation not permitted)
    Which test shall I run next?: 1
    OK: USBDEVFS_RESET succeeded
    Which test shall I run next?: 0

After unbinding usbhid and restricting the mask:

    $ sudo ./usbdevfs-drop-permissions /dev/bus/usb/001/002
    ...
    Which option shall I run?: 3
    Insert new mask: 0
    OK: privileges dropped!
    Which test shall I run next?: 2
    ERROR claiming if 0 (1 - Operation not permitted)
    ERROR claiming if 1 (1 - Operation not permitted)
    ERROR claiming if 2 (1 - Operation not permitted)
    ERROR claiming if 3 (1 - Operation not permitted)

Signed-off-by: Reilly Grant <reillyg@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Emilio López <emilio.lopez@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-05 12:05:01 -08:00
Greg Kroah-Hartman 3d0712deb0 usb changes for v4.6 merge window
This is almost all under drivers/usb/dwc2/. Many
 changes to the host side implementation of dwc2 have
 been done by Douglas Anderson.
 
 We also have USB 3.1 support added to the Gadget
 Framework and, because of that work, dwc3 got
 support to Synopsys new DWC_usb31 IP core.
 
 Other than these 2 important series, we also have
 the usual collection of non-critical fixes,
 Documentation updates, and minor changes all over
 the place.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW2YqWAAoJEIaOsuA1yqREJEgP/11ETLS7iE+HgYMEWbJxo4Ri
 6H7XryMuqyiqNSUrmYlSeax2CQCLac3fXNN7iDGkT2Ot6E3CcnOzdq5/fTSoAEvN
 vgv0nr1MHQaYlYMlsFNZJjZ98h2ZsmtYFuY+RJAKivgjCKoIR6XHeU0ExjAjyWZJ
 5exPyfA8tGnHOJFGdZUe4bBQGCG5TO/cxVkc7xkX6bLnpJibuiRJfToxbwHjY0cK
 mQPba+Tw+3E72mhZw1qw8jwqjLCdgRZXlEvMl0ogaiQydEntDC4bIbY4xDJ8c4L2
 EsACyyx63XYTiaELScxJ2e0Oh0d2yOxLZnUvspsZDlTL0OF/9E2wrVO+1s+FzdQ+
 MmvU9lPcTm+SToIJMWPkmCxpwxtQ2+4HR6IwaU2CIC1YwIjMBzhEvhHV9uZDRx2Q
 7haTEQ5Hny3YvOElEYSAof3WiUCdjMoT4UKCpPFVTZ62mVpOrlcahZoS4UbyOobd
 YGJBx2GwNLpC/Hoa5anasGLeGlR2rtPciHyvYlVm+X9OvQXnHx5d6KqlaBlM+U/6
 vjFtwS7nbbX+ttM7EtdmrC/8i0bFJQqmqg48a7El+E4Os9VJ79+/h9xmoDWoSEWX
 uTUhro+gLs23P6DAd/A08UL/Get0pqM+QdB42Y+ac3CIyl0dviRQ/2JCKgijo52Z
 wK+nnmuJIgzt8ljSzu9G
 =vivP
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v4.6' of http://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb changes for v4.6 merge window

This is almost all under drivers/usb/dwc2/. Many
changes to the host side implementation of dwc2 have
been done by Douglas Anderson.

We also have USB 3.1 support added to the Gadget
Framework and, because of that work, dwc3 got
support to Synopsys new DWC_usb31 IP core.

Other than these 2 important series, we also have
the usual collection of non-critical fixes,
Documentation updates, and minor changes all over
the place.
2016-03-04 18:43:07 -08:00
Li Jun dfbae33095 Documentation: usb: chipidea: Update test procedure for HNP polling
Update HNP test procedure as HNP polling is supported.

Acked-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04 15:14:37 +02:00
Christian Lamparter a6d6fc2b67 usbip: move usbip_protocol.txt to Documentation
The usbip_protocol.txt, a document which describes usbip's
inner workings is currently located in the projects source
directory (drivers/usb/usbip/...). This patch moves it to
Documentation/usb.

This discussion was brought up by Guy Harris [0] during the
review of the USBIP dissector I wrote. For anyone interested:
support is available with the latest wireshark master/dev tree.
Simply select a packet from the usbip's tcp-stream you are
intrested on and select the USBIP as the protocol in the
"Decode As" dialog box [1].

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

[0] <https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=12127#c2>
[1] <https://www.wireshark.org/docs/wsug_html_chunked/ChCustProtocolDissectionSection.html#ChAdvDecodeAs>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 19:44:06 -08:00
Greg Kroah-Hartman f7dbd84fd4 The chipidea changes for v4.5-rc1
- Delete static debug for chipidea driver.
 - Suspend USB core when A device tries to switch to peripheral mode,
   at former design, it just stopped SoF simply but USB core doesn't know it.
 - Several small changes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWfLjWAAoJEEhZKYFQ1nG7R/cH/3xP4nz3pDDOpsX6U8Q1V81D
 K7118WeAOx64sdGRZ3bsEjNko4NI1j2jcQU2Zgtx/I5Q0lJfNm4linNNWJHKEb/m
 1VJVxFJXP6lwWImVWNJbyvhzel8mlgaNza+ZabUOAFmSig9q3yHUq5lDqzPVLZWY
 z7lYQS+sOsCorsQierXiRxSRvkipB32NpdfhEXkj6P6Ji2a1UDDRA7F3f9k9t8QR
 iI1T5+gbJL/3eo+ToOdlGciIUjoa4bK5b0Iz+QeU2eSOqjuVcu4tZO5IJbH/o10Z
 dAhcDOr0DPEGzfpwihevyX3HcRKTKHPlzo2GdW5TJ5e7vm5C43fGHB0GgpIJBWw=
 =7ZBY
 -----END PGP SIGNATURE-----

Merge tag 'usb-ci-v4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-testing

Peter writes:

The chipidea changes for v4.5-rc1

- Delete static debug for chipidea driver.
- Suspend USB core when A device tries to switch to peripheral mode,
  at former design, it just stopped SoF simply but USB core doesn't know it.
- Several small changes.
2015-12-26 16:59:14 -08:00
Greg Kroah-Hartman 87cf5586fd usb: patches for v4.5
A ton of improvements to dwc2 have been made. The
 driver should be a lot more stable on v4.5 then ever
 before.
 
 Our good old dwc3 got a few cleanups and misc fixes
 and also added support to Xilinx's integration of
 this IP.
 
 Yoshihiro Shimoda gives us support for a new USB3
 peripheral controller from Renesas.
 
 Other than these, the usual misc fixes all over the
 place.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWes7RAAoJEIaOsuA1yqREC5cP/jzIWxyHj5rNPr8VGnjzd4Wh
 wcsxGmTLHA+c5FFer0+hnj8DXSELyYV2Lcfng1pkPuGWAsPzdd9FvNV/9Q1RmqPG
 R96JB9N3dnDY7erJZkmpDOJvGg+p/Ec6GmFkrTVWQeXTwlkI1mdvaZwV9iFQfmb0
 V/gdQWdlmbTarmwPLxEpaDN+JDB9Gm6RdyK/B5pC8ZeF9S42aQIFCrfOfjP3OiZj
 o5Q6Gv2YxElSKscObLFyltfgb05YD/yO0al/wm7p0lGXdsaMMokjyxrbibnoFNic
 Z5lexn8DqJ/yjy9w5K3Tj+b4nSfokUibUB3r0Cwbv6di7g0gUNclUwg79X8tSoDS
 T2hkpmpAIvb2z80wlLFpGptfC39JoLtzAkxfBbnu025QxFeI4AknzQuXiW8UgvSO
 /t1Aq6jg3j+GTuU+BiBnLjEPBZSsh/b7qIpreaXIIb7A01e2T7QT5i8kB7Zk5d5F
 4aLBH/QHHXS+RGJmY9qgW6wee0XcaCysCUctwVuPY1fGukPrIFxjhPnJtjjqKnW7
 41RCTwv2DKmm6CV5xVXYfSMVkmWBrNlpjugZkYH9yRbAzwPA/H/A5iPJwoOnGshn
 VNuFJOBKJJFR0u072LidgMWZ7AaeBmWnageAU1sFr8iXWiWESwaAjI4ouPNVugPI
 PxYdhPlc+lHBPXDrPh8p
 =8vM4
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v4.5

A ton of improvements to dwc2 have been made. The
driver should be a lot more stable on v4.5 then ever
before.

Our good old dwc3 got a few cleanups and misc fixes
and also added support to Xilinx's integration of
this IP.

Yoshihiro Shimoda gives us support for a new USB3
peripheral controller from Renesas.

Other than these, the usual misc fixes all over the
place.
2015-12-26 16:56:25 -08:00
Peter Chen 3a35d59a69 usb: chipidea: clean up CONFIG_USB_CHIPIDEA_DEBUG reference
Since this configuration option has deleted, cleans up all
its references.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Reported-by: Valentin Rothberg <valentinrothberg@gmail.com>
2015-12-24 14:15:27 +08:00
Robert Baldyga f310abb33b Documentation: usb: update usb-tools repository address
It seems that gitorious repository is no longer accessible, so we
replace it with address to active repository.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-16 10:07:30 -06:00
Peter Chen df001894e3 Documentation: usb: gadget-testing: add description for depth of queue
Add both bulk and iso depth of queue for sourcesink.

Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-15 09:12:41 -06:00
Lu Baolu bf5ce5bf3c usb: core: lpm: fix usb3_hardware_lpm sysfs node
Commit 655fe4effe ("usbcore: add sysfs support to xHCI usb3
hardware LPM") introduced usb3_hardware_lpm sysfs node. This
doesn't show the correct status of USB3 U1 and U2 LPM status.

This patch fixes this by replacing usb3_hardware_lpm with two
nodes, usb3_hardware_lpm_u1 (for U1) and usb3_hardware_lpm_u2
(for U2), and recording the U1/U2 LPM status in right places.

This patch should be back-ported to kernels as old as 4.3,
that contains Commit 655fe4effe ("usbcore: add sysfs support
to xHCI usb3 hardware LPM").

Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-01 14:58:18 -08:00
Stefan Koch 7f59c150ad usb: interface authorization: Documentation part
This part adds the documentation for the interface authorization.

Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-22 12:08:40 -07:00
Greg Kroah-Hartman dba3398381 Revert "usb: interface authorization: Documentation part"
This reverts commit 6ef2bf7176 as the
signed-off-by address is invalid.

Cc: Stefan Koch <stefan.koch10@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-18 09:57:15 -07:00
Stefan Koch 6ef2bf7176 usb: interface authorization: Documentation part
This part adds the documentation for the interface authorization.

Signed-off-by: Stefan Koch <skoch@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-14 16:55:55 -07:00
Greg Kroah-Hartman a3fbedf98f usb: patches for v4.3 merge window
New support for Allwinne SoC on the MUSB driver has been added to the list of
 glue layers. MUSB also got support for building all DMA engines in one binary;
 this will be great for distros.
 
 DWC3 now has no trace of dev_dbg()/dev_vdbg() usage. We will rely solely on
 tracing to debug DWC3. There was also a fix for memory corruption with EP0 when
 maxpacket size transfers are > 512 bytes.
 
 Robert's EP capabilities flags is making EP selection a lot simpler. UDCs are
 now required to set these flags up when adding endpoints to the framework.
 
 Other than these, we have the usual set of miscelaneous cleanups and minor
 fixes.
 
 Signed-off-by: Felipe Balbi <balbi@ti.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVzKiVAAoJEIaOsuA1yqRETzgP/3zwJOLKB1rA7FAXMSSps58G
 07hpKQumq4fd2JZzWulssIvLiShMKFHn/sqa4BJM2AAYpd/Ct3hCzI+WAseNTD7H
 mfkdezeEBSeZcG8BnMV08wUAf1MdUM4Xit60uVGSJi+dTT1Y8O/3QcTkXvnXwraN
 gH8/M/bO3YLu2uD627x3egLuYYfHn2waZnvpbxdLREirOW/OyYoNA9SUqh1VyNu7
 VIwKNF/l2RCKjI39FbUUjNMzZ468Cd53r1dLYeUMgwWMvziE4+iFum2qz/Gy5fBQ
 GxtHNVNcvovHc9NraAGMZx4oJeoAnlE2FJm4345i9E9YmYyEJfFyBU9HucmwLnU4
 R4wrz0IelCLDamdxzAjNYdD2JLLMGaFKMUxpfvn7KSYnHILedHgDe9xfYmfMQr+B
 oqPl1KptDgOeiea9bl2Vfdfm+TsroKXQF/YUBTEPy71vdQwSyK0W+YX6Ag2yBErC
 Fq3DcuFlSbDg7BAKXJV19FWNUt046k5pnf8s4W4fgmTZvHJeLTz8zpIYgOhXbzxc
 esR0igPZMuckeYDlTYKaFLJ/sqFX5eUpo38rO++wVIpxsEjmR9r1XZr6fkqT25hU
 mOS7S05xOCqAA66ErxrMk/bHznRMwB99f+BR1uOGDajqlgyg+wq6A5ftNbZrnGEw
 rv2rC0/Mo8rC136aV3UW
 =WuIB
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v4.3 merge window

New support for Allwinne SoC on the MUSB driver has been added to the list of
glue layers. MUSB also got support for building all DMA engines in one binary;
this will be great for distros.

DWC3 now has no trace of dev_dbg()/dev_vdbg() usage. We will rely solely on
tracing to debug DWC3. There was also a fix for memory corruption with EP0 when
maxpacket size transfers are > 512 bytes.

Robert's EP capabilities flags is making EP selection a lot simpler. UDCs are
now required to set these flags up when adding endpoints to the framework.

Other than these, we have the usual set of miscelaneous cleanups and minor
fixes.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-14 16:41:11 -07:00
Peter Chen f811a38300 doc: usb: gadget-testing: using the updated testusb.c
testusb.c at http://www.linux-usb.org/usbtest/ is out of date,
using the one at the kernel source folder.

Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-31 09:02:07 -05:00
Kevin Strasser 655fe4effe usbcore: add sysfs support to xHCI usb3 hardware LPM
Add a sysfs node to make it easier to verify if LPM is supported and being
enabled for USB 3.0 devices.

Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-22 15:45:03 -07:00
Linus Torvalds 2a298679b4 USB patches for 4.2-rc1
Here's the big USB patchset for 4.2-rc1.  As is normal these days, the
 majority of changes are in the gadget drivers, with a bunch of other
 small driver changes.
 
 All of these have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlWNobIACgkQMUfUDdst+ylXtQCgwTnzFBzly+3h1Npa2CWkr/Lw
 TWAAn31qEP28MLjm8iVJLNPwdVd2kt1w
 =hrdz
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here's the big USB patchset for 4.2-rc1.  As is normal these days, the
  majority of changes are in the gadget drivers, with a bunch of other
  small driver changes.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (175 commits)
  usb: dwc3: Use ASCII space in Kconfig
  usb: chipidea: add work-around for Marvell HSIC PHY startup
  usb: chipidea: allow multiple instances to use default ci_default_pdata
  dt-bindings: Consolidate ChipIdea USB ci13xxx bindings
  phy: add Marvell HSIC 28nm PHY
  phy: Add Marvell USB 2.0 OTG 28nm PHY
  dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings
  USB: ssb: use devm_kzalloc
  USB: ssb: fix error handling in ssb_hcd_create_pdev()
  usb: isp1760: check for null return from kzalloc
  cdc-acm: Add support of ATOL FPrint fiscal printers
  usb: chipidea: usbmisc_imx: Remove unneeded semicolon
  USB: usbtmc: add device quirk for Rigol DS6104
  USB: serial: mos7840: Use setup_timer
  phy: twl4030-usb: add ABI documentation
  phy: twl4030-usb: remove incorrect pm_runtime_get_sync() in probe function.
  phy: twl4030-usb: remove pointless 'suspended' test in 'suspend' callback.
  phy: twl4030-usb: make runtime pm more reliable.
  drivers:usb:fsl: Fix compilation error for fsl ehci drv
  usb: renesas_usbhs: Don't disable the pipe if Control write status stage
  ...
2015-06-26 15:59:26 -07:00
Andrzej Pietrasiewicz d6d22922d9 usb: gadget: rndis: remove the limit of available rndis connections
RNDIS function has a limitation on the number of allowed instances.
So far it has been RNDIS_MAX_CONFIGS, which happens to be one.
In order to eliminate this kind of arbitrary limitation we should not
preallocate a predefined (RNDIS_MAX_CONFIGS) array of struct rndis_params
instances but instead allow allocating them on demand.

This patch allocates struct rndis_params on demand in rndis_register().
Coversly, the structure is free()'d in rndis_deregister().
If CONFIG_USB_GADGET_DEBUG_FILES is set, the proc files are created which
is the same behaviour as before, but the moment of creation is delayed
until struct rndis_params is actually allocated.

rnids_init() and rndis_exit() have nothing to do, so they are eliminated.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-07 13:47:17 -05:00
H. Nikolaus Schaller e3aa205aa1 Documentation usb serial: fixed how to provide vendor and product id
While trying to test a Cinterion GSM/GPS/3G module I had reconfigured
the USB interface by mistake and therefore needed to run a different
USB driver than CDC-ACM. It turned out that I need the "usbserial" driver.

This file is an official description how to use it:
Documentation/usb/usb-serial.txt

But it is outdated. The parameters vendor= and product= have been
superseded by a /sys interface.

Here was the solution:

https://bbs.archlinux.org/viewtopic.php?id=175499

  insmod usbserial vendor=0x#### product=0x####

becomes (first #### is vendor, second is product)

  modprobe usbserial
  echo #### #### >/sys/bus/usb-serial/drivers/generic/new_id

This patch changes the documentation file to describe the modern variant.
Please note that the old one still works (if compiled as module).

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-05-07 09:44:04 -06:00
Peter Chen 4e39acab03 usb: Documentation: gadget-testing: fix parameter for capture channel mask
Fix the UAC2 parameter capture channel mask

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-04-27 15:55:39 -05:00
Greg Kroah-Hartman 1c41a9570a usb: patches for v4.1 merge window
As usual, a big pile of commits. This time a total
 of 111 non-merge commits.
 
 Other than the usual set of cleanups and non-critical
 fixes, we have some interesting work for AM335x's MUSB
 babble recovery. Now that takes a lot less time and we
 don't have to Reset MUSB all the time.
 
 The printer gadget has been converted to configfs interface
 and the atmel udc has learned suspend/resume with wakeup.
 
 Signed-off-by: Felipe Balbi <balbi@ti.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVEZlvAAoJEIaOsuA1yqREvPMP/1dxQ6ufjkfmBmeZWiDWmwQs
 uoLskjNqVlnmcjWdasEwUSKMJMYfxNAmabYCx7ZWdmcDi0FNvmrjSfXqmM5uG5bF
 UKgP/7KbiK9WSRAcAuFEqYCMcAoH2CcLhlZ7BF7Peo+WxeQrh0A4ZPxh4VVJI2D4
 47/bpXFqPydVZyZurpfB0QA1r5jjsG+tJdP/LJKv6/g38XSBs4cgFUzzBWDN8212
 YVKlCiRWRwnCOrYFP1pf/gR4SM8UF4Vd+lDZ28JnwcxCmTKKMhAAoHjgckV6UctW
 Ur+hshsuvPwFWm9Rqp77TnO37LranaFUR2W2cBUGiPSZaUeXsdOhORpT+S64nuZi
 ZEw4qp9QlRwH8wCBT0m/Uozv+CZ7VP41hjYdFpcUevd/XLPQjx1ddn032jGYsrtC
 o+drLGtuULimusf/14zs1X4ejLdeYy6f0hLzqyDS8zTHAjToAmrM3Uw9nQWxWauB
 rHdTYMrgMGoolnIFVSLgR6xbGMu9wCYexylKFwVWEV6xrj4ZgpoVitUGg5DphCQy
 FdEepkeWgAUTcYC3wcIUHHC9wVS3YgPWRmyKjnh65kIFDGjPjHMK1eW06RGuhld/
 A92UJNIga34RtUXSUrcuwRBtWY+pDE/6XxppqzxTKAMjT9HV8JNPZGHu+2nKP0kp
 qu9PqszUGOyCuTG9+A+E
 =U+M2
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v4.1 merge window

As usual, a big pile of commits. This time a total
of 111 non-merge commits.

Other than the usual set of cleanups and non-critical
fixes, we have some interesting work for AM335x's MUSB
babble recovery. Now that takes a lot less time and we
don't have to Reset MUSB all the time.

The printer gadget has been converted to configfs interface
and the atmel udc has learned suspend/resume with wakeup.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-24 22:57:49 +01:00
Peter Chen 01e3ad863f doc: usb: chipidea: add usb wakeup enable example
Add the example for how to enable USB as system wakeup source.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18 16:19:09 +01:00
Andrzej Pietrasiewicz ee1cd515e8 usb: gadget: printer: add configfs support
Add support for configfs interface so that f_printer can be used as a
component of usb gadgets composed with it.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:41 -05:00
Greg Kroah-Hartman 4d4bac4499 usb: patches for v3.20 merge window
Here's the big pull request for Gadgets and PHYs. It's
 a total of 217 non-merge commits with pretty much everything
 being touched.
 
 The most important bits are a ton of new documentation for
 almost all usb gadget functions, a new isp1760 UDC driver,
 several improvements to the old net2280 UDC driver, and
 some minor tracepoint improvements to dwc3.
 
 Other than that, a big list of minor cleanups, smaller bugfixes
 and new features all over the place.
 
 Signed-off-by: Felipe Balbi <balbi@ti.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU0lRFAAoJEIaOsuA1yqRE17sP/R4iPwrPQGVQBaqg5AOHZGEe
 dKf9GqZZIPzNIs4146Ua5W/9d4U6zQKndy+fRQaNEVc2SR3Tm0IwOSokvSaC3FYr
 NEGHMoRnTWd/JWSVB/6sy0qn8rKRMbkxR7u9lG9M/JACUymn3NJfH4D0jq85ewPR
 0Tjv4g5wGnv3YEmnWgR5ieFgn0OxgUBiGUF7QufgMp7G3F2hjmeligBD0jt3w6tD
 G4oMHp+pRfPCcm8mcdiHoP3aXOtNJ824rI+b1EZkKBKeo7FxRDIe48Vl107XOpOB
 yUFnQVGZazh1Oi6Vxmh9O1mmjpNOir/4dni7gZfh1uGC7cJ7tSkOfbN4jH4Ycsay
 Ckt8XQkmf/z9VWTONsAkDwfPhnMbxCafz8Fi/UdOXsoR69YV1MKnt1zRN5dzgNq9
 7EIqDwPPJi6qwLACoqxVYknSmXQqhW8B0IMPpMqEByvR1mnIOWomlFot63AufMaQ
 +uS7JGJguUmMvkyP1FJRKcPsd9u4PYll5JzymPsvSB6xtDisVFqYb3BbfieZHpBn
 +/ZFqltT71pQ3TxIx2ZiTk1e91PiKJUbEQikV6TBiLhgtkpn2J8obHtF50K4+xHh
 wXOU3VHFd2ZONN+WB5F5EoVtZiwsd3pARr8QJRcVhdXltTWElJ2qsA4Z1+5QVhAy
 mqXYcwsvBe9C+5p2pYwR
 =bGMq
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.20 merge window

Here's the big pull request for Gadgets and PHYs. It's
a total of 217 non-merge commits with pretty much everything
being touched.

The most important bits are a ton of new documentation for
almost all usb gadget functions, a new isp1760 UDC driver,
several improvements to the old net2280 UDC driver, and
some minor tracepoint improvements to dwc3.

Other than that, a big list of minor cleanups, smaller bugfixes
and new features all over the place.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-04 11:03:20 -08:00
Andrzej Pietrasiewicz 9c4f538bfa Documentation: usb: UVC function testing
Summary of how to test UVC function of USB gadget.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12 12:13:26 -06:00
Andrzej Pietrasiewicz 020c6f9348 Documentation: usb: UAC2 function testing
Summary of how to test UAC2 function of USB gadget.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12 12:13:25 -06:00
Andrzej Pietrasiewicz dae0358694 Documentation: usb: UAC1 function testing
Summary of how to test UAC1 function of USB gadget.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12 12:13:25 -06:00
Andrzej Pietrasiewicz 480a912be4 Documentation: usb: SOURCESINK function testing
Summary of how to test SOURCESINK function of USB gadget.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12 12:13:25 -06:00
Andrzej Pietrasiewicz 4dfcec8a2f Documentation: usb: SERIAL function testing
Summary of how to test SERIAL function of USB gadget.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12 12:13:25 -06:00
Andrzej Pietrasiewicz ddb722449c Documentation: usb: RNDIS function testing
Summary of how to test RNDIS function of USB gadget.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12 12:13:25 -06:00
Andrzej Pietrasiewicz da2907d2b0 Documentation: usb: PHONET function testing
Summary of how to test PHONET function of USB gadget.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12 12:13:25 -06:00
Andrzej Pietrasiewicz d81b85dcf1 Documentation: usb: OBEX function testing
Summary of how to test OBEX function of USB gadget.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12 12:13:25 -06:00
Andrzej Pietrasiewicz 4d0fa79e0e Documentation: usb: NCM function testing
Summary of how to test NCM function of USB gadget.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12 12:13:25 -06:00
Andrzej Pietrasiewicz 0d6be59a1d Documentation: usb: MIDI function testing
Summary of how to test MIDI function of USB gadget.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12 12:13:25 -06:00
Andrzej Pietrasiewicz cdbe287d27 Documentation: usb: MASS STORAGE function testing
Summary of how to test MASS STORAGE function of USB gadget.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12 12:13:25 -06:00
Andrzej Pietrasiewicz ec91aff763 Documentation: usb: LOOPBACK function testing
Summary of how to test LOOPBACK function of USB gadget.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12 12:13:25 -06:00
Andrzej Pietrasiewicz f7e3c3cd24 Documentation: usb: HID function testing
Summary of how to test HID function of USB gadget.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12 12:13:25 -06:00
Andrzej Pietrasiewicz 2c0f62f9e4 Documentation: usb: FFS function testing
Summary of how to test FFS (FunctionFS) function of USB gadget.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12 12:13:25 -06:00
Andrzej Pietrasiewicz 4ca560a6d3 Documentation: usb: EEM function testing
Summary of how to test EEM function of USB gadget.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12 12:13:24 -06:00
Andrzej Pietrasiewicz 7bfbc6e3fb Documentation: usb: ECM subset function testing
Summary of how to test ECM subset function of USB gadget.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12 12:13:24 -06:00
Andrzej Pietrasiewicz d5862ca6da Documentation: usb: ECM function testing
Summary of how to test ECM function of USB gadget.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12 12:13:24 -06:00
Andrzej Pietrasiewicz e38eb2c8cb Documentation: usb: ACM function testing
The newly added file will be used to provide descriptions of how to test
the functions of USB gadgets.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12 12:13:24 -06:00
Andrzej Pietrasiewicz b797ef4e16 Documentation: usb: gadget_serial: update generic serial setup instruction
Using module parameters to specify accepted Vendor ID, Product ID is
considered legacy now. Update the documentation to reflect it.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12 12:13:24 -06:00
Jeremiah Mahler 11a6322a93 doc: usbmon: fix spelling s/unpriviledged/unprivileged/
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-09 12:25:54 -08:00
Jeremiah Mahler 7690037d5b doc: usbmon: fix wording "be reading until"
The usbmon documentation uses "be reading until" which is an unusual
wording.  Change it to "read until it" which is more clear.

Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-09 12:25:54 -08:00
Linus Torvalds e7cf773d43 USB patches for 3.19-rc1
Here's the big set of USB and PHY patches for 3.19-rc1.
 
 The normal churn in the USB gadget area is in here, as well as xhci and
 other individual USB driver updates.  The PHY tree is also in here, as
 there were dependancies on the USB tree.
 
 All of these have been in linux-next.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOEHcACgkQMUfUDdst+ykziQCgsm1D/af2nac6CTF2pov8VMIY
 ywgAnRi8LtZ2WassrwTNxY86Avaqryis
 =UVp8
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here's the big set of USB and PHY patches for 3.19-rc1.

  The normal churn in the USB gadget area is in here, as well as xhci
  and other individual USB driver updates.  The PHY tree is also in
  here, as there were dependancies on the USB tree.

  All of these have been in linux-next"

* tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (351 commits)
  arm: omap3: twl: remove usb phy init data
  usbip: fix error handling in stub_probe()
  usb: gadget: udc: missing curly braces
  USB: mos7720: delete some unneeded code
  wusb: replace memset by memzero_explicit
  usbip: remove unneeded structure
  usb: xhci: fix comment for PORT_DEV_REMOVE
  xhci: don't use the same variable for stopped and halted rings current TD
  xhci: clear extra bits from slot context when setting max exit latency
  xhci: cleanup finish_td function
  USB: adutux: NULL dereferences on disconnect
  usb: chipidea: fix platform_no_drv_owner.cocci warnings
  usb: chipidea: Fixed a few typos in comments
  Documentation: bindings: add doc for the USB2 ChipIdea USB driver
  usb: chipidea: add a usb2 driver for ci13xxx
  usb: chipidea: fix phy handling
  usb: chipidea: remove duplicate dev_set_drvdata for host_start
  usb: chipidea: parameter 'mode' isn't needed for hw_device_reset
  usb: chipidea: add controller reset API
  usb: chipidea: remove flag CI_HDRC_REQUIRE_TRANSCEIVER
  ...
2014-12-14 14:57:16 -08:00
Linus Torvalds a7cb7bb664 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree update from Jiri Kosina:
 "Usual stuff: documentation updates, printk() fixes, etc"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits)
  intel_ips: fix a type in error message
  cpufreq: cpufreq-dt: Move newline to end of error message
  ps3rom: fix error return code
  treewide: fix typo in printk and Kconfig
  ARM: dts: bcm63138: change "interupts" to "interrupts"
  Replace mentions of "list_struct" to "list_head"
  kernel: trace: fix printk message
  scsi: mpt2sas: fix ioctl in comment
  zbud, zswap: change module author email
  clocksource: Fix 'clcoksource' typo in comment
  arm: fix wording of "Crotex" in CONFIG_ARCH_EXYNOS3 help
  gpio: msm-v1: make boolean argument more obvious
  usb: Fix typo in usb-serial-simple.c
  PCI: Fix comment typo 'COMFIG_PM_OPS'
  powerpc: Fix comment typo 'CONIFG_8xx'
  powerpc: Fix comment typos 'CONFiG_ALTIVEC'
  clk: st: Spelling s/stucture/structure/
  isci: Spelling s/stucture/structure/
  usb: gadget: zero: Spelling s/infrastucture/infrastructure/
  treewide: Fix company name in module descriptions
  ...
2014-12-12 10:08:06 -08:00
Rafael J. Wysocki ceb6c9c862 USB / PM: Drop CONFIG_PM_RUNTIME from the USB core
After commit b2b49ccbdd (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so quite a few
depend on CONFIG_PM (or even dropped in some cases).

Replace CONFIG_PM_RUNTIME with CONFIG_PM in the USB core code
and documentation.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-04 00:51:54 +01:00
Greg Kroah-Hartman 9f10adc544 USB-serial updates for v3.19-rc1
These changes add a new "simple" driver for Google USB-serial
 devices and add support for Huawei Gobi modems to qcserial.
 
 Included are also some removals of unnecessary atomic allocations and
 a few spelling fixes.
 
 Signed-off-by: Johan Hovold <johan@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUdgpuAAoJEEEN5E/e4bSVaJQQALOUxnD2buLDycTzKDhaPfxd
 iRAHkPWWFOnMGiSQ2gzxgYVVg+qqFMPZkRSHo+/eBpOjKZsVITavyD3W0h5JHJ9S
 yOCH3/tSU1w6P5zTN22qwrOvQ0R1+h+KSc7r8c2tXw2G8DXDog4qKDWRAh0IJiro
 E6qR9yvTcwgXWXN4eMsmUNotiC7lMeMpk1pW8BJlALQ66CNkCJNQ6j5J0d9L8pTA
 JaTBgMFWOniSVLGvWz6ylBEN3Xd8OWcHKpDsJoLIm/urWLazhjMtQpr//YsyyIvl
 uFVB7ejt2fi18ae+2Tv3VojGYuY5Hk4oRgtZjoTceSks65HBSdNnqcUXrWkJOMLy
 So59wUzZMD2KVjtVW1vzLtwcZwbyrVntW+8Nm7skFDVVBY041r5fgsIJ1weWz7c4
 sGUmF0Gkr/rK8yn6BPoUvRun5hdxySr1dl+sTZdD+ATwZpAV6YsThwd38csFxeG5
 MLKFbksm2dFCyczyINkp/39bHlWr8LQmZbuxHa09sklaM97z08duuDJlTdcUK089
 ZDRI1kviGYeib4OXljHXrWV1E9FVE85kkKBL9BHYfX85nf8RVv++ZB1vqYjQfhUJ
 Pj7vXsae++e4AeAZNTE8060QLgpSZMAVqOwAuous+mb0piPp5uHYhBmrQhPqhcXP
 5zPUrKOL63AsTnKNgHyX
 =m/eD
 -----END PGP SIGNATURE-----

Merge tag 'usb-serial-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next

Johan writes:

USB-serial updates for v3.19-rc1

These changes add a new "simple" driver for Google USB-serial
devices and add support for Huawei Gobi modems to qcserial.

Included are also some removals of unnecessary atomic allocations and
a few spelling fixes.

Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-26 10:41:46 -08:00
Jiri Kosina a02001086b Merge Linus' tree to be be to apply submitted patches to newer code than
current trivial.git base
2014-11-20 14:42:02 +01:00