Commit Graph

612 Commits

Author SHA1 Message Date
Guenter Roeck a5c47c0d38 hwmon: Introduce SENSOR_DEVICE_ATTR_{RO, RW, WO} and variants
Introduce SENSOR_DEVICE_ATTR_{RO,RW,WO} and SENSOR_DEVICE_ATTR_2_{RO,RW,WO}
as simplified variants of SENSOR_DEVICE_ATTR and SENSOR_DEVICE_ATTR_2 to
simplify the source code, improve readbility, and reduce the chance of
inconsistencies.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-12-16 15:13:22 -08:00
Jagan Teki 2e9a41bbc1 hwmon: (lm75) Add STLM75 support
The STLM75 is a high-precision digital CMOS temperature sensor
IC with a sigma-delta temperature-to-digital converter.

The configuration register mapping is similar to existing lm75
but the sample rate is 150ms(max).

Tested on real hardware and verified temperature readings are correct.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-12-16 15:13:22 -08:00
Nicolin Chen 9a629d7ada Documentation: hwmon: Add descriptions for ina2xx sysfs entries
There are a few sysfs entries being exposed to user space by the
ina2xx hwmon driver while not getting explicitly documented. So
this patch just adds a description section for them.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-12-16 15:13:15 -08:00
Eddie James cd261c9832 Documentation: hwmon: Add OCC documentation
Document the hwmon interface for the OCC.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-12-02 16:25:28 -08:00
Chris Packham f1af93216c hwmon: (adt7475) document mapping of sysfs entries to inputs
As per the usual standard with hwmon drivers the mapping to sysfs
entries follows the register map of the device e.g. in0_input
corresponds to the register 0x20, in1_input corresponds to 0x21 etc.

Hardware designers tend to work with input pins instead of registers
which is where things start to get confusing. A hardware designer might
say "the 1.5V rail is connected to the VCCP pin" leaving the software
designer none the wiser as to which of the sysfs entries should be
associated with the label "1.5V".

Try to bridge the gap by documenting the mapping of sysfs entries to
the corresponding pins. This should allow someone to create a
configuration file or other mapping without needing to dive into the
code and ADT datasheets.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-12-02 16:25:28 -08:00
Kun Yi 6e5c06ad94 hwmon: (adm1275) Allow setting shunt reg value
The ADM series of hotswap controllers support extending
the current measurement range by using a sensing resistor
value other than the typical 1 mOhm. For example, using a 0.5 mOhm
sensing resistor doubles the maximal current can be measured.

Current driver assumes a shunt resistor value of 1 mOhm in calculation,
meaning for other resistor values, hwmon will report scaled
current/power measurements. This patch parses device tree parameter
"shunt-resistor-micro-ohms", if there is one.

Signed-off-by: Kun Yi <kunyi@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-12-02 16:25:28 -08:00
Nicolin Chen a9e9dd9c6d hwmon: (ina3221) Read channel input source info from DT
An ina3221 chip has three input ports. Each port is used
to measure the voltage and current of its input source.

The DT binding now has defined bindings for their input
sources, so the driver should read these information and
handle accordingly.

This patch adds a new structure of input source specific
information including input source label, shunt resistor
value and its connection status. It exposes these labels
via in[123]_label sysfs nodes upon available, and also
disables those channels where there are no input source
being connected. Meanwhile, it also adds in[123]_enable
sysfs nodes for users to get control of three channels,
and returns -ENODATA code for any sensor read according
to hwmon ABI.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-10-10 20:37:13 -07:00
Kun Yi a54ca77a98 hwmon: (lm75) Add MAX31725/6 support
MAX31725/MAX31726 are local temperature sensors with +/- 0.5 degree
Celsius accuracy and 16-bit (0.00390625 degrees Celsius) resolution.
They have a register mapping and encoding compatible with the lm75
series drivers. Address scan and extended temperature range are
not supported by this patch.

Tested on real hardware and verified temperature readings are correct.

Signed-off-by: Kun Yi <kunyi@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-10-10 20:37:13 -07:00
Fabio Estevam 23d3f131bf hwmon: (mc13783-adc) Use nxp.com URLs
Use the nxp.com URLs for the MC13783 and MC13892 datasheets.

The original URLs are still valid, but the nxp.com one is shorter
and more up-to-date.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-10-10 20:37:13 -07:00
Fabio Estevam 3d13aa37ba hwmon: (mc13783-adc) Remove the mention to 'Atlas'
'Atlas' was an internal name for the MC13783 PMIC only and does not
apply to MC13892.

To avoid confusion, remove the 'Atlas' term from the description.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-10-10 20:37:13 -07:00
Michael Hennerich 4e15d05d9c drivers: hwmon: (pmbus/ltc2978) Add support for LTM4686 uModule
This patch adds support for LTM4686 Ultrathin Dual 10A or
Single 20A uModule Regulator with Digital Power System Management.

Datasheet: http://www.analog.com/ltm4686

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-10-10 20:37:13 -07:00
Lothar Felten 3ad867001c hwmon: (ina2xx) fix sysfs shunt resistor read access
fix the sysfs shunt resistor read access: return the shunt resistor
value, not the calibration register contents.

update email address

Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-08-26 17:45:25 -07:00
Linus Torvalds f3ea496213 ARM: SoC driver updates
Some of the larger changes this merge window:
  - Removal of drivers for Exynos5440, a Samsung SoC that never saw
    widespread use.
  - Uniphier support for USB3 and SPI reset handling
  - Syste control and SRAM drivers and bindings for Allwinner platforms
  - Qualcomm AOSS (Always-on subsystem) reset controller drivers
  - Raspberry Pi hwmon driver for voltage
  - Mediatek pwrap (pmic) support for MT6797 SoC
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlt+MMkPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3pB4QAIj7iVxSKEQFz65iXLTfMJKFZ9TSvRgWSDyE
 CHF+WOQGTnxkvySEHSw/SNqDM+Bas8ijR8b4vWzsXJFB+3HA0ZTGLU379/af1zCE
 9k8QjyIWtRWKX9fo7qCHVXlMfxGbOdbCOsh4jnmHqEIDxCHXpIiJRfvUbKIXGpfn
 tw6QpM70vm6Q6AdKwzmDbMCYnQAMWxBK/G/Q7BfRG+IYWYjFGbiWIc9BV9Ki8+nE
 3235ISaTHvAHodoec8tpLxv34GsOP4RCqscGYEuCf22RYfWva4S9e4yoWT8qPoIl
 IHWNsE3YWjksqpt9rj9Pie/PycthO4E4BUPMtqjMbC2OyKFgVsAcHrmToSdd+7ob
 t3VNM6RVl8xyWSRlm5ioev15CCOeWRi1nUT7m3UEBWpQ6ihJVpbjf1vVxZRW/E0t
 cgC+XzjSg26sWx1bSH9lGPFytOblAcZ04GG/Kpz02MmTgMiTdODFZ67AsqtdeQS7
 a9wpaQ+DgTqU0VcQx8Kdq8uy9MOztkhXn5yO8fEWjpm0lPcxjhJS4EpN+Ru2T7/Z
 AMuy5lRJfQzAPU9kY7TE0yZ07pgpZgh7LlWOoKtGD7UklzXVVZrVlpn7bApRN5vg
 ZLze5OiEiIF5gIiRC8sIyQ9TZdvg4NqwebCqspINixqs7iIpB7TG93WQcy82osSE
 TXhtx4Sy
 =ZjwY
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Some of the larger changes this merge window:

   - Removal of drivers for Exynos5440, a Samsung SoC that never saw
     widespread use.

   - Uniphier support for USB3 and SPI reset handling

   - Syste control and SRAM drivers and bindings for Allwinner platforms

   - Qualcomm AOSS (Always-on subsystem) reset controller drivers

   - Raspberry Pi hwmon driver for voltage

   - Mediatek pwrap (pmic) support for MT6797 SoC"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits)
  drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests
  soc: fsl: cleanup Kconfig menu
  soc: fsl: dpio: Convert DPIO documentation to .rst
  staging: fsl-mc: Remove remaining files
  staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl
  staging: fsl-dpaa2: eth: move generic FD defines to DPIO
  soc: fsl: qe: gpio: Add qe_gpio_set_multiple
  usb: host: exynos: Remove support for Exynos5440
  clk: samsung: Remove support for Exynos5440
  soc: sunxi: Add the A13, A23 and H3 system control compatibles
  reset: uniphier: add reset control support for SPI
  cpufreq: exynos: Remove support for Exynos5440
  ata: ahci-platform: Remove support for Exynos5440
  soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata
  soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs
  soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs
  soc: mediatek: pwrap: fix cipher init setting error
  dt-bindings: pwrap: mediatek: add pwrap support for MT6797
  reset: uniphier: add USB3 core reset control
  dt-bindings: reset: uniphier: add USB3 core reset support
  ...
2018-08-23 13:52:46 -07:00
Linus Torvalds 5e2d059b52 powerpc updates for 4.19
Notable changes:
 
  - A fix for a bug in our page table fragment allocator, where a page table page
    could be freed and reallocated for something else while still in use, leading
    to memory corruption etc. The fix reuses pt_mm in struct page (x86 only) for
    a powerpc only refcount.
 
  - Fixes to our pkey support. Several are user-visible changes, but bring us in
    to line with x86 behaviour and/or fix outright bugs. Thanks to Florian Weimer
    for reporting many of these.
 
  - A series to improve the hvc driver & related OPAL console code, which have
    been seen to cause hardlockups at times. The hvc driver changes in particular
    have been in linux-next for ~month.
 
  - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y.
 
  - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in use
    anywhere other than as a paper weight.
 
  - An optimised memcmp implementation using Power7-or-later VMX instructions
 
  - Support for barrier_nospec on some NXP CPUs.
 
  - Support for flushing the count cache on context switch on some IBM CPUs
    (controlled by firmware), as a Spectre v2 mitigation.
 
  - A series to enhance the information we print on unhandled signals to bring it
    into line with other arches, including showing the offending VMA and dumping
    the instructions around the fault.
 
 Thanks to:
   Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Alexey
   Spirkov, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar,
   Arnd Bergmann, Bartosz Golaszewski, Benjamin Herrenschmidt, Bharat Bhushan,
   Bjoern Noetel, Boqun Feng, Breno Leitao, Bryant G. Ly, Camelia Groza,
   Christophe Leroy, Christoph Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt,
   Darren Stevens, Dave Young, David Gibson, Diana Craciun, Finn Thain, Florian
   Weimer, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand,
   Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel Stanley,
   Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus
   Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues, Michael Hanselmann, Michael
   Neuling, Michael Schmitz, Mukesh Ojha, Murilo Opsfelder Araujo, Nicholas
   Piggin, Parth Y Shah, Paul Mackerras, Paul Menzel, Ram Pai, Randy Dunlap,
   Rashmica Gupta, Reza Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff,
   Scott Wood, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson,
   Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat Rao
   B, zhong jiang.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAlt2O6cTHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgC7hD/4+cj796Df7GsVsIMxzQm7SS9dklIdO
 JuKj2Nr5HRzTH59jWlXukLG9mfTNCFgFJB4gEpK1ArDOTcHTCI9RRsLZTZ/kum66
 7Pd+7T40dLYXB5uecuUs0vMXa2fI3syKh1VLzACSXv3Dh9BBIKQBwW/aD2eww4YI
 1fS5LnXZ2PSxfr6KNAC6ogZnuaiD0sHXOYrtGHq+S/TFC7+Z6ySa6+AnPS+hPVoo
 /rHDE1Khr66aj7uk+PP2IgUrCFj6Sbj6hTVlS/iAuwbMjUl9ty6712PmvX9x6wMZ
 13hJQI+g6Ci+lqLKqmqVUpXGSr6y4NJGPS/Hko4IivBTJApI+qV/tF2H9nxU+6X0
 0RqzsMHPHy13n2torA1gC7ttzOuXPI4hTvm6JWMSsfmfjTxLANJng3Dq3ejh6Bqw
 76EMowpDLexwpy7/glPpqNdsP4ySf2Qm8yq3mR7qpL4m3zJVRGs11x+s5DW8NKBL
 Fl5SqZvd01abH+sHwv6NLaLkEtayUyohxvyqu2RU3zu5M5vi7DhqstybTPjKPGu0
 icSPh7b2y10WpOUpC6lxpdi8Me8qH47mVc/trZ+SpgBrsuEmtJhGKszEnzRCOqos
 o2IhYHQv3lQv86kpaAFQlg/RO+Lv+Lo5qbJ209V+hfU5nYzXpEulZs4dx1fbA+ze
 fK8GEh+u0L4uJg==
 =PzRz
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - A fix for a bug in our page table fragment allocator, where a page
     table page could be freed and reallocated for something else while
     still in use, leading to memory corruption etc. The fix reuses
     pt_mm in struct page (x86 only) for a powerpc only refcount.

   - Fixes to our pkey support. Several are user-visible changes, but
     bring us in to line with x86 behaviour and/or fix outright bugs.
     Thanks to Florian Weimer for reporting many of these.

   - A series to improve the hvc driver & related OPAL console code,
     which have been seen to cause hardlockups at times. The hvc driver
     changes in particular have been in linux-next for ~month.

   - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y.

   - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in
     use anywhere other than as a paper weight.

   - An optimised memcmp implementation using Power7-or-later VMX
     instructions

   - Support for barrier_nospec on some NXP CPUs.

   - Support for flushing the count cache on context switch on some IBM
     CPUs (controlled by firmware), as a Spectre v2 mitigation.

   - A series to enhance the information we print on unhandled signals
     to bring it into line with other arches, including showing the
     offending VMA and dumping the instructions around the fault.

  Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey
  Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan,
  Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski,
  Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng,
  Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph
  Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave
  Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer,
  Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand,
  Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel
  Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh
  Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues,
  Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha,
  Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul
  Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza
  Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood,
  Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago
  Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat
  Rao, zhong jiang"

* tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits)
  powerpc/mm/book3s/radix: Add mapping statistics
  powerpc/uaccess: Enable get_user(u64, *p) on 32-bit
  powerpc/mm/hash: Remove unnecessary do { } while(0) loop
  powerpc/64s: move machine check SLB flushing to mm/slb.c
  powerpc/powernv/idle: Fix build error
  powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range
  powerpc/mm: remove warning about ‘type’ being set
  powerpc/32: Include setup.h header file to fix warnings
  powerpc: Move `path` variable inside DEBUG_PROM
  powerpc/powermac: Make some functions static
  powerpc/powermac: Remove variable x that's never read
  cxl: remove a dead branch
  powerpc/powermac: Add missing include of header pmac.h
  powerpc/kexec: Use common error handling code in setup_new_fdt()
  powerpc/xmon: Add address lookup for percpu symbols
  powerpc/mm: remove huge_pte_offset_and_shift() prototype
  powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled
  powerpc/pseries: Fix endianness while restoring of r3 in MCE handler.
  powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements
  powerpc/fadump: handle crash memory ranges array index overflow
  ...
2018-08-17 11:32:50 -07:00
Shilpasri G Bhat e0da99123f hwmon: (ibmpowernv) Add attributes to enable/disable sensor groups
OPAL firmware provides the facility for some groups of sensors to be
enabled/disabled at runtime to give the user the option of using the
system resources for collecting these sensors or not.

For example, on POWER9 systems, the On Chip Controller (OCC) gathers
various system and chip level sensors and maintains their values in
main memory.

This patch provides support for enabling/disabling the sensor groups
like power, temperature, current and voltage.

Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
[stewart@linux.vnet.ibm.com: Commit message]
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-31 19:56:45 +10:00
Stefan Wahren 74d1e00791 hwmon: Add support for RPi voltage sensor
Currently there is no easy way to detect undervoltage conditions on a
remote Raspberry Pi. This hwmon driver retrieves the state of the
undervoltage sensor via mailbox interface. The handling based on
Noralf's modifications to the downstream firmware driver. In case of
an undervoltage condition only an entry is written to the kernel log.

CC: "Noralf Trønnes" <noralf@tronnes.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Guenter Roeck <linux@roeck-us.net>
2018-07-09 10:47:27 -07:00
Tomer Maimon f1fd4a4db7 hwmon: Add NPCM7xx PWM and Fan driver
Add Nuvoton BMC NPCM750/730/715/705 Pulse Width Modulation (PWM)
and Fan tacho driver.

The Nuvoton BMC NPCM750/730/715/705 supports 8 PWM controller outputs
and 16 Fan controller inputs.

The driver provides a sysfs entries through which the user can
configure the duty-cycle value from 0(off) and 255(full speed)
and read the fan tacho rpm value.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-07-08 20:08:13 -07:00
Kun Yi 7a001dbab4 hwmon: (pmbus/max34440) Add support for MAX34451.
MAX34451 is a 16-Channel Voltage/Current Monitor and 12-Channel
Sequencer.

Signed-off-by: Kun Yi <kunyi@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-07-08 20:08:13 -07:00
Shilpasri G Bhat fb41a710f8 hwmon: Document the sensor enable attribute
Document new ABI attributes:
	in[0-*]_enable
	fan[1-*]_enable
	temp[1-*]_enable
	curr[1-*]_enable
	power[1-*]_enable
	energy[1-*]_enable
	humidity[1-*]_enable

Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
[groeck: Updated commit text, removed unnecessary details from
 ABI description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-07-08 20:08:13 -07:00
Vadim Pasternak 65afb4c8e7 hwmon: (mlxreg-fan) Add support for Mellanox FAN driver
Driver obtains PWM and tachometers registers location according to the
system configuration and creates FAN/PWM hwmon objects and a cooling
device. PWM and tachometers are controlled through the on-board
programmable device, which exports its register map. This device could be
attached to any bus type, for which register mapping is supported. Single
instance is created with one PWM control, up to 12 tachometers and one
cooling device. It could be as many instances as programmable device
supports.

Currently driver will be activated from the Mellanox platform driver:
drivers/platform/x86/mlx-platform.c.
For the future ARM based systems it could be activated from the ARM
platform module.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-07-08 20:08:13 -07:00
Mauro Carvalho Chehab 34962fb807 docs: Fix more broken references
As we move stuff around, some doc references are broken. Fix some of
them via this script:
	./scripts/documentation-file-ref-check --fix

Manually checked that produced results are valid.

Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-06-15 18:11:26 -03:00
Tom Levens 5d9ca430ea hwmon: (ltc2990) support all measurement modes
Updated version of the ltc2990 driver which supports all measurement
modes (current, voltage, temperature) available in the chip.

If devicetree is used, the mode must be specified with the property
"lltc,meas-mode". The format and possible values of the property are
described in the binding.

If devicetree is not used, the mode of the chip will not be configured.
Unless the chip is configured by another source, only the internal
temperature and supply voltage will be measured.

Signed-off-by: Tom Levens <tom.levens@cern.ch>
Tested-By: mike.looijmans@topic.nl
[groeck: Fixed compiler warning]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21 07:52:01 -07:00
Lucas Magasweran 59df4f4e8e hwmon: (core) check parent dev != NULL when chip != NULL
hwmon_device_register_with_info() registration API requires a
non-NULL parent device when chip is non-NULL.

This commit adds a check and documents this requirement.

Signed-off-by: Lucas Magasweran <lucas.magasweran@ieee.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21 07:51:59 -07:00
Alvaro G. M 10ecacd794 hwmon: (lm92) Add max6635 to lm92_id[]
Since autodetection of this chip was removed, it makes sense to add prefix
max6635 so that the device can be instantiated by its actual name.

Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-03-22 09:33:24 -07:00
Guenter Roeck 4ff0ce227a hwmon: (pmbus/adm1275) Add support for ADM1272
The chip is quite similar to other chips in the series,
but as usual it comes with its own quirks.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-03-22 09:32:17 -07:00
Alvaro G. M 05993e226a hwmon: (lm92) Do not try to detect MAX6635
Maxim MAX663x family are mostly compatible with LM92, but they lack any
identification register. Weakening the detect function would make it prone
to false positives, and current one doesn't detect all chips.  Therefore,
the detect function for max6635 devices is removed in favor of explicit
device instatiation.

Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-03-22 09:32:05 -07:00
Guenter Roeck 81820059a4 hwmon: (nct6775) Add support for NCT6796D
NCT6796D is mostly compatible to NCT6795D. It supports an additional
pwm control and fan speed channel.

While we are at it, update documentation for NCT6795D.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-03-10 19:00:14 -08:00
Danilo Bargen b20edea9a6 hwmon: (sht3x) Update data sheet URL
The previously used URL is dead.

Sensirion provides permalinks for their product datasheets at
https://www.sensirion.com/en/about-us/links/.

Signed-off-by: Danilo Bargen <mail@dbrgn.ch>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-03-10 19:00:14 -08:00
Danilo Bargen 8e1d6fe961 hwmon: (sht21) Update data sheet URLs
The previously used URLs are dead.

Sensirion provides permalinks for their product datasheets at
https://www.sensirion.com/en/about-us/links/.

Signed-off-by: Danilo Bargen <mail@dbrgn.ch>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-03-10 19:00:14 -08:00
Andrew Jeffery cf583b4275 hwmon: (pmbus/max31785) Add dual tachometer support
The dual tachometer feature is implemented in hardware with a TACHSEL
input to indicate the rotor under measurement, and exposed on the device
by extending the READ_FAN_SPEED_1 word with two extra bytes*. The need
to read the non-standard four-byte response leads to a cut-down
implementation of i2c_smbus_xfer_emulated() included in the driver.
Further, to expose the second rotor tachometer value to userspace the
values are exposed through virtual pages. We re-route accesses to
FAN_CONFIG_1_2 and READ_FAN_SPEED_1 on pages 23-28 (not defined by the
hardware) to the same registers on pages 0-5, and with the latter command
we extract the value from the second word of the four-byte response.

* The documentation recommends the slower rotor be associated with
TACHSEL=0, which corresponds to the first word of the response. The
TACHSEL=0 measurement is used by the controller's closed-loop fan
management to judge target fan rate.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02 15:05:34 -08:00
Andrew Jeffery 56ad86b4b1 hwmon: (pmbus/max31785) Add fan control
The implementation makes use of the new fan control virtual registers
exposed by the pmbus core. It mixes use of the default implementations
with some overrides via the read/write handlers to handle FAN_COMMAND_1
on the MAX31785, whose definition breaks the value range into various
control bands dependent on RPM or PWM mode.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02 15:05:34 -08:00
Guenter Roeck 666c14906b hwmon: (pmbus/lm25066) Drop support for LM25063
LM25063 was never released. Drop support for it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02 15:05:34 -08:00
Lei YU ba3d858844 hwmon: (w83773g) Add documentation
Add documentation for the w83773g driver.

Signed-off-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-02 15:05:34 -08:00
Andrew Jeffery 4d420a6a9d pmbus: Add driver for Maxim MAX31785 Intelligent Fan Controller
The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel
fan management with temperature and remote voltage sensing. It supports
various fan control features, including PWM frequency control, temperature
hysteresis, dual tachometer measurements, and fan health monitoring.

This patch presents a basic driver using only the existing features of the
PMBus subsystem.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
[groeck: Modified description to clarify that fan control is not yet provided]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-11-05 06:06:33 -08:00
Linus Walleij 186731145f hwmon: (sht15) Root out platform data
After finding out there are active users of this sensor I noticed:

- It has a single PXA27x board file using the platform data
- The platform data is only used to carry two GPIO pins, all other
  fields are unused
- The driver does not use GPIO descriptors but the legacy GPIO
  API

I saw we can swiftly fix this by:

- Killing off the platform data entirely
- Define a GPIO descriptor lookup table in the board file
- Use the standard devm_gpiod_get() to grab the GPIO descriptors
  from either the device tree or the board file table.

This compiles, but needs testing.

Cc: arm@kernel.org
Cc: Marco Franchi <marco.franchi@nxp.com>
Cc: Davide Hug <d@videhug.ch>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Marco Franchi <marco.franchi@nxp.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-10-29 18:36:03 -07:00
Xo Wang 5783ec2e5c hwmon: (pmbus/lm25066) Add support for TI LM5066I
The TI LM5066I hotswap controller is a more accurate version of the
LM5066 device already supported. It has different measurement conversion
coefficients than the LM5066, so it needs to be recognized as a
different device.

Signed-off-by: Xo Wang <xow@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-08-30 06:31:13 -07:00
Edward A. James caf59a5b63 Documentation: hwmon: Document the IBM CFF power supply
Signed-off-by: Edward A. James <eajames@us.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-08-29 18:07:13 -07:00
Thilo Cestonaro 7576750f03 hwmon: (ftsteutates) Fix clearing alarm sysfs entries
sysfs store functions should return the number of bytes written.
Returning zero results in an endless loop.

Fixes: 08426eda58 ("hwmon: Add driver for FTS BMC chip "Teutates"")
Signed-off-by: Thilo Cestonaro <thilo.cestonaro@ts.fujitsu.com>
[groeck: Clean up documentation change and description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-08-13 08:24:01 -07:00
Wolfram Sang 4ba1bb12cf hwmon: (pmbus) move header file out of I2C realm
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11 17:08:19 -07:00
Wolfram Sang 8116e8dd56 hwmon: (ltc4245) move header file out of I2C realm
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11 17:08:19 -07:00
Wolfram Sang 9010624cc5 hwmon: (ads1015) move header file out of I2C realm
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11 17:08:19 -07:00
Chris Packham 8f05bcc33e hwmon: (adt7475) temperature smoothing
When enabled temperature smoothing allows ramping the fan speed over a
configurable period of time instead of jumping to the new speed
instantaneously.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11 17:08:19 -07:00
Chris Packham 1d58f5efbf hwmon: (adt7475) fan stall prevention
By default adt7475 will stop the fans (pwm duty cycle 0%) when the
temperature drops past Tmin - hysteresis. Some systems want to keep the
fans moving even when the temperature drops so add new sysfs attributes
that configure the enhanced acoustics min 1-3 which allows the fans to
run at the minimum configure pwm duty cycle.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11 17:08:19 -07:00
Samuel Mendoza-Jonas 8991ebd9c9 hwmon: (pmbus) Add client driver for IR35221
IR35221 is a Digital DC-DC Multiphase Converter

Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
[groeck: Preserve alphabetic order in Kconfig;
	add missing break statements (from Dan Carpenter);
	add missing error checks]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11 17:08:19 -07:00
Jaghathiswari Rankappagounder Natarajan 2d7a548a3e drivers: hwmon: Support for ASPEED PWM/Fan tach
The ASPEED AST2400/2500 PWM controller supports 8 PWM output ports.
The ASPEED AST2400/2500 Fan tach controller supports 16 tachometer
inputs.
The device driver matches on the device tree node. The configuration
values are read from the device tree and written to the respective
registers.
The driver provides a sysfs entries through which the user can
configure the duty-cycle value (ranging from 0 to 100 percent) and read
the fan tach rpm value.

Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-10 13:12:18 -07:00
Chris Packham 3dead5d596 docs: hwmon: Fix typo "Microship" should be "Microchip"
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-02 07:01:53 -07:00
Linus Torvalds c1aac62f36 A slightly quieter cycle for documentation this time around.
Three more DocBook template files have been converted to RST; only 21 to
 go.  There are various build improvements and the usual array of
 documentation improvements and fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYriFXAAoJEI3ONVYwIuV6iTMP/iV7ownq9IK1f8askcXKM76i
 NoRdj4/JywAPQ73vLhOSDVELGdVJNRBjdyOdBRzxPgsqAhFmm79lVYV2eLIffQ2k
 7LcVbEQR77I+4z9SwqIVbIWNCBry7Hu8aWh7moDL3I6yeuay408yr5YW2lIlsqHZ
 V/LZgkTWDe+iQPeXNA4Djzylx0lcRlAy4yMSLjN1+gb9/uBnXb9J0eGJzgfZfrL8
 fiIhymg3bv8vB99l6LMR5vT343QLWXf1yS31A7rPQvwkDo6zFehUJA0XNfIsl2dw
 VQYsvl9vp9wy3e6Y0qKXPn1XhAhCrm64P3crBxK31MMvcKZVCfeRSZ78wrvpvewy
 MVLlXdqop1bHPHowtRfA5jwxr1NqcYp+Jg0+YGX3iXpPi1Jfk36DNUy9iWvtvIzr
 lWgQcIKsdCwwYUcvPR8Kt8T/3q/AHbYlI6mimWlkmbZwncQcgCrH5xSG+c2BIPfV
 fn3W6eLHBn8RyVsxlaXlA0Y9TNtI/Cm85b3Ri10pFvhl868ppWfJxXHi7UtcbU58
 sQzahISCTXOH/NQwkkh7kFMtczbB43rAcChvF7EUYpazVBpJ4P4HxKFg3eIzIdc6
 VlBSaMu1hxUGoYxNNYuKr/nYstuczLOKzK7q4j/JOExY3RgTWP+T3bF02wgubvoa
 D/9WfScewkgCJRoA7i17
 =C5nd
 -----END PGP SIGNATURE-----

Merge tag 'docs-4.11' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "A slightly quieter cycle for documentation this time around.

  Three more DocBook template files have been converted to RST; only 21
  to go. There are various build improvements and the usual array of
  documentation improvements and fixes"

* tag 'docs-4.11' of git://git.lwn.net/linux: (44 commits)
  docs / driver-api: Fix structure references in device_link.rst
  PM / docs: Fix structure references in device.rst
  Add a target to check broken external links in the Documentation
  Documentation: Fix linux-api list typo
  Documentation: DocBook/Makefile comment typo
  Improve sparse documentation
  Documentation: make Makefile.sphinx no-ops quieter
  Documentation: DMA-ISA-LPC.txt
  Documentation: input: fix path to input code definitions
  docs: Remove the copyright year from conf.py
  docs: Fix a warning in the Korean HOWTO.rst translation
  PM / sleep / docs: Convert PM notifiers document to reST
  PM / core / docs: Convert sleep states API document to reST
  PM / core: Update kerneldoc comments in pm.h
  doc-rst: Fix recursive make invocation from macros
  doc-rst: Delete output of failed dot-SVG conversion
  doc-rst: Break shell command sequences on failure
  Documentation/sphinx: make targets independent of Sphinx work for HAVE_SPHINX=0
  doc-rst: fixed cleandoc target when used with O=dir
  Documentation/sphinx: prevent generation of .pyc files in the source tree
  ...
2017-02-22 18:51:29 -08:00
Guenter Roeck f172841573 hwmon: Update documentation to clarify rules for the 'name' attribute
Clarify that the name attribute must report a valid name, and the rules
for valid names. Also clarify that the name parameter must be provided
for all supported API functions.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-01-25 06:14:36 -08:00
Florian Fainelli 68f0c8c923 hwmon: (lm70) Add support for TI TMP122/124
Add support for Texas Instruments TMP122/124 which are nearly identical to
their TMP121/123 except that they also support programmable temperature
thresholds.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-01-21 12:26:38 -08:00
Colin Ian King 0a4cbc53d7 Documentation: fix spelling mistakes of "Celcius" -- > "Celsius"
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-01-04 14:36:17 -07:00