The patch raises the hard limit of VCPU count to 254.
This will allow developers to easily work on scalability
and will allow users to test high VCPU setups easily without
patching the kernel.
To prevent possible issues with current setups, KVM_CAP_NR_VCPUS
now returns the recommended VCPU limit (which is still 64) - this
should be a safe value for everybody, while a new KVM_CAP_MAX_VCPUS
returns the hard limit which is now 254.
Cc: Avi Kivity <avi@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Suggested-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Using the read/write operation to remove the same code
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The operations of read emulation and write emulation are very similar, so we
can abstract the operation of them, in larter patch, it is used to cleanup the
same code
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If the range spans a page boundary, the mmio access can be broke, fix it as
write emulation.
And we already get the guest physical address, so use it to read guest data
directly to avoid walking guest page table again
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Src2CL decode (used for double width shifts) erronously decodes only bit 3
of %rcx, instead of bits 7:0.
Fix by decoding %cl in its entirety.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
__update_clear_spte_slow should return original spte while the
current code returns low half of original spte combined with high
half of new spte.
Signed-off-by: Zhao Jin <cronozhj@gmail.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
CONFIG_TASKSTATS just had a change to use netlink, including
a change to "depends on NET". Since "select" does not follow
dependencies, KVM also needs to depend on NET to prevent build
errors when CONFIG_NET is not enabled.
Sample of the reported "undefined reference" build errors:
taskstats.c:(.text+0x8f686): undefined reference to `nla_put'
taskstats.c:(.text+0x8f721): undefined reference to `nla_reserve'
taskstats.c:(.text+0x8f8fb): undefined reference to `init_net'
taskstats.c:(.text+0x8f905): undefined reference to `netlink_unicast'
taskstats.c:(.text+0x8f934): undefined reference to `kfree_skb'
taskstats.c:(.text+0x8f9e9): undefined reference to `skb_clone'
taskstats.c:(.text+0x90060): undefined reference to `__alloc_skb'
taskstats.c:(.text+0x901e9): undefined reference to `skb_put'
taskstats.c:(.init.text+0x4665): undefined reference to `genl_register_family'
taskstats.c:(.init.text+0x4699): undefined reference to `genl_register_ops'
taskstats.c:(.init.text+0x4710): undefined reference to `genl_unregister_ops'
taskstats.c:(.init.text+0x471c): undefined reference to `genl_unregister_family'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Fix kconfig dependency warning:
warning: (KVM) selects TASK_DELAY_ACCT which has unmet direct dependencies (TASKSTATS)
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>
Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
fs: Merge split strings
treewide: fix potentially dangerous trailing ';' in #defined values/expressions
uwb: Fix misspelling of neighbourhood in comment
net, netfilter: Remove redundant goto in ebt_ulog_packet
trivial: don't touch files that are removed in the staging tree
lib/vsprintf: replace link to Draft by final RFC number
doc: Kconfig: `to be' -> `be'
doc: Kconfig: Typo: square -> squared
doc: Konfig: Documentation/power/{pm => apm-acpi}.txt
drivers/net: static should be at beginning of declaration
drivers/media: static should be at beginning of declaration
drivers/i2c: static should be at beginning of declaration
XTENSA: static should be at beginning of declaration
SH: static should be at beginning of declaration
MIPS: static should be at beginning of declaration
ARM: static should be at beginning of declaration
rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check
Update my e-mail address
PCIe ASPM: forcedly -> forcibly
gma500: push through device driver tree
...
Fix up trivial conflicts:
- arch/arm/mach-ep93xx/dma-m2p.c (deleted)
- drivers/gpio/gpio-ep93xx.c (renamed and context nearby)
- drivers/net/r8169.c (just context changes)
The idea is from Avi:
| We could cache the result of a miss in an spte by using a reserved bit, and
| checking the page fault error code (or seeing if we get an ept violation or
| ept misconfiguration), so if we get repeated mmio on a page, we don't need to
| search the slot list/tree.
| (https://lkml.org/lkml/2011/2/22/221)
When the page fault is caused by mmio, we cache the info in the shadow page
table, and also set the reserved bits in the shadow page table, so if the mmio
is caused again, we can quickly identify it and emulate it directly
Searching mmio gfn in memslots is heavy since we need to walk all memeslots, it
can be reduced by this feature, and also avoid walking guest page table for
soft mmu.
[jan: fix operator precedence issue]
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Use rcu to protect shadow pages table to be freed, so we can safely walk it,
it should run fastly and is needed by mmio page fault
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Now, the spte is just from nonprsent to present or present to nonprsent, so
we can use some trick to set/clear spte non-atomicly as linux kernel does
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Introduce some interfaces to modify spte as linux kernel does:
- mmu_spte_clear_track_bits, it set the spte from present to nonpresent, and
track the stat bits(accessed/dirty) of spte
- mmu_spte_clear_no_track, the same as mmu_spte_clear_track_bits except
tracking the stat bits
- mmu_spte_set, set spte from nonpresent to present
- mmu_spte_update, only update the stat bits
Now, it does not allowed to set spte from present to present, later, we can
drop the atomicly opration for X86_32 host, and it is the preparing work to
get spte on X86_32 host out of the mmu lock
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Introduce handle_abnormal_pfn to handle fault pfn on page fault path,
introduce mmu_invalid_pfn to handle fault pfn on prefetch path
It is the preparing work for mmio page fault support
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If the page fault is caused by mmio, the gfn can not be found in memslots, and
'bad_pfn' is returned on gfn_to_hva path, so we can use 'bad_pfn' to identify
the mmio page fault.
And, to clarify the meaning of mmio pfn, we return fault page instead of bad
page when the gfn is not allowd to prefetch
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The idea is from Avi:
| Maybe it's time to kill off bypass_guest_pf=1. It's not as effective as
| it used to be, since unsync pages always use shadow_trap_nonpresent_pte,
| and since we convert between the two nonpresent_ptes during sync and unsync.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Split kvm_mmu_free_page to kvm_mmu_isolate_page and
kvm_mmu_free_page
One is used to remove the page from cache under mmu lock and the other is
used to free page table out of mmu lock
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Move counting used shadow pages from commiting path to preparing path to
reduce tlb flush on some paths
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If 'pt_write' is true, we need to emulate the fault. And in later patch, we
need to emulate the fault even though it is not a pt_write event, so rename
it to better fit the meaning
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
gw->pte_access is the final access permission, since it is unified with
gw->pt_access when we walked guest page table:
FNAME(walk_addr_generic):
pte_access = pt_access & FNAME(gpte_access)(vcpu, pte, true);
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If dirty bit is not set, we can make the pte access read-only to avoid handing
dirty bit everywhere
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If the page fault is caused by mmio, we can cache the mmio info, later, we do
not need to walk guest page table and quickly know it is a mmio fault while we
emulate the mmio instruction
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Introduce vcpu_mmio_gva_to_gpa to translate the gva to gpa, we can use it
to cleanup the code between read emulation and write emulation
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Properly check the last mapping, and do not walk to the next level if last spte
is met
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
virtio has been so far used only in the context of virtualization,
and the virtio Kconfig was sourced directly by the relevant arch
Kconfigs when VIRTUALIZATION was selected.
Now that we start using virtio for inter-processor communications,
we need to source the virtio Kconfig outside of the virtualization
scope too.
Moreover, some architectures might use virtio for both virtualization
and inter-processor communications, so directly sourcing virtio
might yield unexpected results due to conflicting selections.
The simple solution offered by this patch is to always source virtio's
Kconfig in drivers/Kconfig, and remove it from the appropriate arch
Kconfigs. Additionally, a virtio menu entry has been added so virtio
drivers don't show up in the general drivers menu.
This way anyone can use virtio, though it's arguably less accessible
(and neat!) for virtualization users now.
Note: some architectures (mips and sh) seem to have a VIRTUALIZATION
menu merely for sourcing virtio's Kconfig, so that menu is removed too.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To implement steal time, we need the hypervisor to pass the guest
information about how much time was spent running other processes
outside the VM, while the vcpu had meaningful work to do - halt
time does not count.
This information is acquired through the run_delay field of
delayacct/schedstats infrastructure, that counts time spent in a
runqueue but not running.
Steal time is a per-cpu information, so the traditional MSR-based
infrastructure is used. A new msr, KVM_MSR_STEAL_TIME, holds the
memory area address containing information about steal time
This patch contains the hypervisor part of the steal time infrasructure,
and can be backported independently of the guest portion.
[avi, yongjie: export delayacct_on, to avoid build failures in some configs]
Signed-off-by: Glauber Costa <glommer@redhat.com>
Tested-by: Eric B Munson <emunson@mgebm.net>
CC: Rik van Riel <riel@redhat.com>
CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Yongjie Ren <yongjie.ren@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The current name does not explain the meaning well. So give it a better
name "retry_walk" to show that we are trying the walk again.
This was suggested by Ingo Molnar.
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Avoid two step jump to the error handling part. This eliminates the use
of the variables present and rsvd_fault.
We also use the const type qualifier to show that write/user/fetch_fault
do not change in the function.
Both of these were suggested by Ingo Molnar.
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This reverts commit bee931d31e588b8eb86b7edee32fac2d16930cd7.
TLB flush should be done lazily during guest entry, in
kvm_mmu_load().
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
kvm_set_cr0() and kvm_set_cr4(), and possible other functions,
assume that kvm_mmu_reset_context() flushes the guest TLB. However,
it does not.
Fix by flushing the tlb (and syncing the new root as well).
Signed-off-by: Avi Kivity <avi@redhat.com>
When CR0.WP=0, we sometimes map user pages as kernel pages (to allow
the kernel to write to them). Unfortunately this also allows the kernel
to fetch from these pages, even if CR4.SMEP is set.
Adjust for this by also setting NX on the spte in these circumstances.
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch exposes ERMS feature to KVM guests.
The REP MOVSB/STOSB instruction can enhance fast strings attempts to
move as much of the data with larger size load/stores as possible.
Signed-off-by: Yang, Wei <wei.y.yang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch exposes DRNG feature to KVM guests.
The RDRAND instruction can provide software with sequences of
random numbers generated from white noise.
Signed-off-by: Yang, Wei <wei.y.yang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
commit 123108f1c1aafd51d6a5c79cc04d7999dd88a930 tried to fix KVMs
XSAVE valid feature scanning, but it was wrong. It was not considering
the sparse nature of this bitfield, instead reading values from
uninitialized members of the entries array.
This patch now separates subleaf indicies from KVM's array indicies
and fills the entry before querying it's value.
This fixes AVX support in KVM guests.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The nested VMX feature is supposed to fully emulate VMX for the guest. This
(theoretically) not only allows it to run its own guests, but also also
to further emulate VMX for its own guests, and allow arbitrarily deep nesting.
This patch fixes a bug (discovered by Kevin Tian) in handling a VMLAUNCH
by L2, which prevented deeper nesting.
Deeper nesting now works (I only actually tested L3), but is currently
*absurdly* slow, to the point of being unusable.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This saves a lot of pointless casts x86_emulate_ctxt and decode_cache.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The name eip conflicts with a field of the same name in x86_emulate_ctxt,
which we plan to fold decode_cache into.
The name _eip is unfortunate, but what's really needed is a refactoring
here, not a better name.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Different functions for those which take segment register operands.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
In addition, replace one "goto xchg" with an em_xchg() call.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The next patch will change these to be called by opcode::execute.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We should use the local variables ctxt and c when the emulate_ctxt and
decode appears many times. At least, we need to be consistent about
how we use these in a function.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Small corrections of KVM (spelling, etc.) not directly related to nested VMX.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If the "nested" module option is enabled, add the "VMX" CPU feature to the
list of CPU features KVM advertises with the KVM_GET_SUPPORTED_CPUID ioctl.
Qemu uses this ioctl, and intersects KVM's list with its own list of desired
cpu features (depending on the -cpu option given to qemu) to determine the
final list of features presented to the guest.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
In the unlikely case that L1 does not capture MSR_IA32_TSC, L0 needs to
emulate this MSR write by L2 by modifying vmcs02.tsc_offset. We also need to
set vmcs12.tsc_offset, for this change to survive the next nested entry (see
prepare_vmcs02()).
Additionally, we also need to modify vmx_adjust_tsc_offset: The semantics
of this function is that the TSC of all guests on this vcpu, L1 and possibly
several L2s, need to be adjusted. To do this, we need to adjust vmcs01's
tsc_offset (this offset will also apply to each L2s we enter). We can't set
vmcs01 now, so we have to remember this adjustment and apply it when we
later exit to L1.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
KVM's "Lazy FPU loading" means that sometimes L0 needs to set CR0.TS, even
if a guest didn't set it. Moreover, L0 must also trap CR0.TS changes and
NM exceptions, even if we have a guest hypervisor (L1) who didn't want these
traps. And of course, conversely: If L1 wanted to trap these events, we
must let it, even if L0 is not interested in them.
This patch fixes some existing KVM code (in update_exception_bitmap(),
vmx_fpu_activate(), vmx_fpu_deactivate()) to do the correct merging of L0's
and L1's needs. Note that handle_cr() was already fixed in the above patch,
and that new code in introduced in previous patches already handles CR0
correctly (see prepare_vmcs02(), prepare_vmcs12(), and nested_vmx_vmexit()).
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When L2 tries to modify CR0 or CR4 (with mov or clts), and modifies a bit
which L1 asked to shadow (via CR[04]_GUEST_HOST_MASK), we already do the right
thing: we let L1 handle the trap (see nested_vmx_exit_handled_cr() in a
previous patch).
When L2 modifies bits that L1 doesn't care about, we let it think (via
CR[04]_READ_SHADOW) that it did these modifications, while only changing
(in GUEST_CR[04]) the bits that L0 doesn't shadow.
This is needed for corect handling of CR0.TS for lazy FPU loading: L0 may
want to leave TS on, while pretending to allow the guest to change it.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch adds correct handling of IDT_VECTORING_INFO_FIELD for the nested
case.
When a guest exits while delivering an interrupt or exception, we get this
information in IDT_VECTORING_INFO_FIELD in the VMCS. When L2 exits to L1,
there's nothing we need to do, because L1 will see this field in vmcs12, and
handle it itself. However, when L2 exits and L0 handles the exit itself and
plans to return to L2, L0 must inject this event to L2.
In the normal non-nested case, the idt_vectoring_info case is discovered after
the exit, and the decision to inject (though not the injection itself) is made
at that point. However, in the nested case a decision of whether to return
to L2 or L1 also happens during the injection phase (see the previous
patches), so in the nested case we can only decide what to do about the
idt_vectoring_info right after the injection, i.e., in the beginning of
vmx_vcpu_run, which is the first time we know for sure if we're staying in
L2.
Therefore, when we exit L2 (is_guest_mode(vcpu)), we disable the regular
vmx_complete_interrupts() code which queues the idt_vectoring_info for
injection on next entry - because such injection would not be appropriate
if we will decide to exit to L1. Rather, we just save the idt_vectoring_info
and related fields in vmcs12 (which is a convenient place to save these
fields). On the next entry in vmx_vcpu_run (*after* the injection phase,
potentially exiting to L1 to inject an event requested by user space), if
we find ourselves in L1 we don't need to do anything with those values
we saved (as explained above). But if we find that we're in L2, or rather
*still* at L2 (it's not nested_run_pending, meaning that this is the first
round of L2 running after L1 having just launched it), we need to inject
the event saved in those fields - by writing the appropriate VMCS fields.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Similar to the previous patch, but concerning injection of exceptions rather
than external interrupts.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The code in this patch correctly emulates external-interrupt injection
while a nested guest L2 is running.
Because of this code's relative un-obviousness, I include here a longer-than-
usual justification for what it does - much longer than the code itself ;-)
To understand how to correctly emulate interrupt injection while L2 is
running, let's look first at what we need to emulate: How would things look
like if the extra L0 hypervisor layer is removed, and instead of L0 injecting
an interrupt, we had hardware delivering an interrupt?
Now we have L1 running on bare metal with a guest L2, and the hardware
generates an interrupt. Assuming that L1 set PIN_BASED_EXT_INTR_MASK to 1, and
VM_EXIT_ACK_INTR_ON_EXIT to 0 (we'll revisit these assumptions below), what
happens now is this: The processor exits from L2 to L1, with an external-
interrupt exit reason but without an interrupt vector. L1 runs, with
interrupts disabled, and it doesn't yet know what the interrupt was. Soon
after, it enables interrupts and only at that moment, it gets the interrupt
from the processor. when L1 is KVM, Linux handles this interrupt.
Now we need exactly the same thing to happen when that L1->L2 system runs
on top of L0, instead of real hardware. This is how we do this:
When L0 wants to inject an interrupt, it needs to exit from L2 to L1, with
external-interrupt exit reason (with an invalid interrupt vector), and run L1.
Just like in the bare metal case, it likely can't deliver the interrupt to
L1 now because L1 is running with interrupts disabled, in which case it turns
on the interrupt window when running L1 after the exit. L1 will soon enable
interrupts, and at that point L0 will gain control again and inject the
interrupt to L1.
Finally, there is an extra complication in the code: when nested_run_pending,
we cannot return to L1 now, and must launch L2. We need to remember the
interrupt we wanted to inject (and not clear it now), and do it on the
next exit.
The above explanation shows that the relative strangeness of the nested
interrupt injection code in this patch, and the extra interrupt-window
exit incurred, are in fact necessary for accurate emulation, and are not
just an unoptimized implementation.
Let's revisit now the two assumptions made above:
If L1 turns off PIN_BASED_EXT_INTR_MASK (no hypervisor that I know
does, by the way), things are simple: L0 may inject the interrupt directly
to the L2 guest - using the normal code path that injects to any guest.
We support this case in the code below.
If L1 turns on VM_EXIT_ACK_INTR_ON_EXIT, things look very different from the
description above: L1 expects to see an exit from L2 with the interrupt vector
already filled in the exit information, and does not expect to be interrupted
again with this interrupt. The current code does not (yet) support this case,
so we do not allow the VM_EXIT_ACK_INTR_ON_EXIT exit-control to be turned on
by L1.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch contains the logic of whether an L2 exit should be handled by L0
and then L2 should be resumed, or whether L1 should be run to handle this
exit (using the nested_vmx_vmexit() function of the previous patch).
The basic idea is to let L1 handle the exit only if it actually asked to
trap this sort of event. For example, when L2 exits on a change to CR0,
we check L1's CR0_GUEST_HOST_MASK to see if L1 expressed interest in any
bit which changed; If it did, we exit to L1. But if it didn't it means that
it is we (L0) that wished to trap this event, so we handle it ourselves.
The next two patches add additional logic of what to do when an interrupt or
exception is injected: Does L0 need to do it, should we exit to L1 to do it,
or should we resume L2 and keep the exception to be injected later.
We keep a new flag, "nested_run_pending", which can override the decision of
which should run next, L1 or L2. nested_run_pending=1 means that we *must* run
L2 next, not L1. This is necessary in particular when L1 did a VMLAUNCH of L2
and therefore expects L2 to be run (and perhaps be injected with an event it
specified, etc.). Nested_run_pending is especially intended to avoid switching
to L1 in the injection decision-point described above.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch adds a bunch of tests of the validity of the vmcs12 fields,
according to what the VMX spec and our implementation allows. If fields
we cannot (or don't want to) honor are discovered, an entry failure is
emulated.
According to the spec, there are two types of entry failures: If the problem
was in vmcs12's host state or control fields, the VMLAUNCH instruction simply
fails. But a problem is found in the guest state, the behavior is more
similar to that of an exit.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch implements nested_vmx_vmexit(), called when the nested L2 guest
exits and we want to run its L1 parent and let it handle this exit.
Note that this will not necessarily be called on every L2 exit. L0 may decide
to handle a particular exit on its own, without L1's involvement; In that
case, L0 will handle the exit, and resume running L2, without running L1 and
without calling nested_vmx_vmexit(). The logic for deciding whether to handle
a particular exit in L1 or in L0, i.e., whether to call nested_vmx_vmexit(),
will appear in a separate patch below.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Before nested VMX support, the exit handler for a guest executing a VMX
instruction (vmclear, vmlaunch, vmptrld, vmptrst, vmread, vmread, vmresume,
vmwrite, vmon, vmoff), was handle_vmx_insn(). This handler simply threw a #UD
exception. Now that all these exit reasons are properly handled (and emulate
the respective VMX instruction), nothing calls this dummy handler and it can
be removed.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Implement the VMLAUNCH and VMRESUME instructions, allowing a guest
hypervisor to run its own guests.
This patch does not include some of the necessary validity checks on
vmcs12 fields before the entry. These will appear in a separate patch
below.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch contains code to prepare the VMCS which can be used to actually
run the L2 guest, vmcs02. prepare_vmcs02 appropriately merges the information
in vmcs12 (the vmcs that L1 built for L2) and in vmcs01 (our desires for our
own guests).
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Move some of the control field setup to common functions. These functions will
also be needed for running L2 guests - L0's desires (expressed in these
functions) will be appropriately merged with L1's desires.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Move the setting of constant host-state fields (fields that do not change
throughout the life of the guest) from vmx_vcpu_setup to a new common function
vmx_set_constant_host_state(). This function will also be used to set the
host state when running L2 guests.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Implement the VMREAD and VMWRITE instructions. With these instructions, L1
can read and write to the VMCS it is holding. The values are read or written
to the fields of the vmcs12 structure introduced in a previous patch.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
VMX instructions specify success or failure by setting certain RFLAGS bits.
This patch contains common functions to do this, and they will be used in
the following patches which emulate the various VMX instructions.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
In this patch we add to vmcs12 (the VMCS that L1 keeps for L2) all the
standard VMCS fields.
Later patches will enable L1 to read and write these fields using VMREAD/
VMWRITE, and they will be used during a VMLAUNCH/VMRESUME in preparing vmcs02,
a hardware VMCS for running L2.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We saw in a previous patch that L1 controls its L2 guest with a vcms12.
L0 needs to create a real VMCS for running L2. We call that "vmcs02".
A later patch will contain the code, prepare_vmcs02(), for filling the vmcs02
fields. This patch only contains code for allocating vmcs02.
In this version, prepare_vmcs02() sets *all* of vmcs02's fields each time we
enter from L1 to L2, so keeping just one vmcs02 for the vcpu is enough: It can
be reused even when L1 runs multiple L2 guests. However, in future versions
we'll probably want to add an optimization where vmcs02 fields that rarely
change will not be set each time. For that, we may want to keep around several
vmcs02s of L2 guests that have recently run, so that potentially we could run
these L2s again more quickly because less vmwrites to vmcs02 will be needed.
This patch adds to each vcpu a vmcs02 pool, vmx->nested.vmcs02_pool,
which remembers the vmcs02s last used to run up to VMCS02_POOL_SIZE L2s.
As explained above, in the current version we choose VMCS02_POOL_SIZE=1,
I.e., one vmcs02 is allocated (and loaded onto the processor), and it is
reused to enter any L2 guest. In the future, when prepare_vmcs02() is
optimized not to set all fields every time, VMCS02_POOL_SIZE should be
increased.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch includes a utility function for decoding pointer operands of VMX
instructions issued by L1 (a guest hypervisor)
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When the guest can use VMX instructions (when the "nested" module option is
on), it should also be able to read and write VMX MSRs, e.g., to query about
VMX capabilities. This patch adds this support.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
An implementation of VMX needs to define a VMCS structure. This structure
is kept in guest memory, but is opaque to the guest (who can only read or
write it with VMX instructions).
This patch starts to define the VMCS structure which our nested VMX
implementation will present to L1. We call it "vmcs12", as it is the VMCS
that L1 keeps for its L2 guest. We will add more content to this structure
in later patches.
This patch also adds the notion (as required by the VMX spec) of L1's "current
VMCS", and finally includes utility functions for mapping the guest-allocated
VMCSs in host memory.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch allows the guest to enable the VMXE bit in CR4, which is a
prerequisite to running VMXON.
Whether to allow setting the VMXE bit now depends on the architecture (svm
or vmx), so its checking has moved to kvm_x86_ops->set_cr4(). This function
now returns an int: If kvm_x86_ops->set_cr4() returns 1, __kvm_set_cr4()
will also return 1, and this will cause kvm_set_cr4() will throw a #GP.
Turning on the VMXE bit is allowed only when the nested VMX feature is
enabled, and turning it off is forbidden after a vmxon.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch allows a guest to use the VMXON and VMXOFF instructions, and
emulates them accordingly. Basically this amounts to checking some
prerequisites, and then remembering whether the guest has enabled or disabled
VMX operation.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch adds to kvm_intel a module option "nested". This option controls
whether the guest can use VMX instructions, i.e., whether we allow nested
virtualization. A similar, but separate, option already exists for the
SVM module.
This option currently defaults to 0, meaning that nested VMX must be
explicitly enabled by giving nested=1. When nested VMX matures, the default
should probably be changed to enable nested VMX by default - just like
nested SVM is currently enabled by default.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
During tracing the emulator, we noticed that init_emulate_ctxt()
sometimes took a bit longer time than we expected.
This patch is for mitigating the problem by some degree.
By looking into the function, we soon notice that it clears the whole
decode_cache whose size is about 2.5K bytes now. Furthermore, most of
the bytes are taken for the two read_cache arrays, which are used only
by a few instructions.
Considering the fact that we are not assuming the cache arrays have
been cleared when we store actual data, we do not need to clear the
arrays: 2K bytes elimination. In addition, we can avoid clearing the
fetch_cache and regs arrays.
This patch changes the initialization not to clear the arrays.
On our 64-bit host, init_emulate_ctxt() becomes 0.3 to 0.5us faster with
this patch applied.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Use a local pointer to the emulate_ctxt for simplicity. Then, arrange
the hard-to-read mode selection lines neatly.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
So far kvm_arch_vcpu_setup is responsible for freeing the vcpu struct if
it fails. Move this confusing resonsibility back into the hands of
kvm_vm_ioctl_create_vcpu. Only kvm_arch_vcpu_setup of x86 is affected,
all other archs cannot fail.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In VMX, before we bring down a CPU we must VMCLEAR all VMCSs loaded on it
because (at least in theory) the processor might not have written all of its
content back to memory. Since a patch from June 26, 2008, this is done using
a per-cpu "vcpus_on_cpu" linked list of vcpus loaded on each CPU.
The problem is that with nested VMX, we no longer have the concept of a
vcpu being loaded on a cpu: A vcpu has multiple VMCSs (one for L1, a pool for
L2s), and each of those may be have been last loaded on a different cpu.
So instead of linking the vcpus, we link the VMCSs, using a new structure
loaded_vmcs. This structure contains the VMCS, and the information pertaining
to its loading on a specific cpu (namely, the cpu number, and whether it
was already launched on this cpu once). In nested we will also use the same
structure to hold L2 VMCSs, and vmx->loaded_vmcs is a pointer to the
currently active VMCS.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Acked-by: Acked-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of blacklisting known-unsupported cpuid leaves, whitelist known-
supported leaves. This is more conservative and prevents us from reporting
features we don't support. Also whitelist a few more leaves while at it.
Signed-off-by: Avi Kivity <avi@redhat.com>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Cleanup the same operation between kvm_mmu_page_unlink_children and
mmu_pte_write_zap_pte
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Parent pte rmap and page rmap are very similar, so use the same arithmetic
for them
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Abstract the operation of rmap to spte_list, then we can use it for the
reverse mapping of parent pte in the later patch
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Fix:
warning: ‘cs_sel’ may be used uninitialized in this function
warning: ‘ss_sel’ may be used uninitialized in this function
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Simply use __copy_to_user/__clear_user to write guest page since we have
already verified the user address when the memslot is set
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
