Commit Graph

209 Commits

Author SHA1 Message Date
Vivek Goyal d1ae8ffdfa blk-throttle: Trim/adjust slice_end once a bio has been dispatched
o During some testing I did following and noticed throttling stops working.

        - Put a very low limit on a cgroup, say 1 byte per second.
        - Start some reads, this will set slice_end to a very high value.
        - Change the limit to higher value say 1MB/s
        - Now IO unthrottles and finishes as expected.
        - Try to do the read again but IO is not limited to 1MB/s as expected.

o What is happening.
        - Initially low value of limit sets slice_end to a very high value.
        - During updation of limit, slice_end is not being truncated.
        - Very high value of slice_end leads to keeping the existing slice
          valid for a very long time and new slice does not start.
        - tg_may_dispatch() is called in blk_throtle_bio(), and trim_slice()
          is not called in this path. So slice_start is some old value and
          practically we are able to do huge amount of IO.

o There are many ways it can be fixed. I have fixed it by trying to
  adjust/cleanup slice_end in trim_slice(). Generally we extend slices if bio
  is big and can't be dispatched in one slice. After dispatch of bio, readjust
  the slice_end to make sure we don't end up with huge values.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-01 19:34:46 +01:00
Vivek Goyal c2f6805d47 blk-throttle: Fix calculation of max number of WRITES to be dispatched
o Currently we try to dispatch more READS and less WRITES (75%, 25%) in one
  dispatch round. ummy pointed out that there is a bug in max_nr_writes
  calculation. This patch fixes it.

Reported-by: ummy y <yummylln@yahoo.com.cn>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-15 19:32:42 +01:00
Vivek Goyal c49c06e496 blkio-throttle: Fix possible multiplication overflow in iops calculations
o User can specify max iops value of 32bit (UINT_MAX), through cgroup
  interface. If a user has specified say 4294967294 (UNIT_MAX  - 2), then
  on 32bit platform, following multiplication can overflow.

  io_allowed = (tg->iops[rw] * jiffy_elapsed_rnd)

o Explicitly cast the multiplication to 64bit and then perform division and
  then check whether result is still great then UNINT_MAX.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-01 21:16:42 +02:00
Vivek Goyal 5e901a2b95 blkio-throttle: There is no need to convert jiffies to milli seconds
o Do not convert jiffies to mili seconds as it is not required. Just work
  with jiffies and HZ.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-01 21:16:38 +02:00
Vivek Goyal 3aad5d3ee4 blkio-throttle: Fix link failure failure on i386
o Randy Dunlap reported following linux-next failure. This patch fixes it.

on i386:

blk-throttle.c:(.text+0x1abb8): undefined reference to `__udivdi3'
blk-throttle.c:(.text+0x1b1dc): undefined reference to `__udivdi3'

o bytes_per_second interface is 64bit and I was continuing to do 64 bit
  division even on 32bit platform without help of special macros/functions
  hence the failure.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-01 14:51:14 +02:00
Vivek Goyal fe0714377e blkio: Recalculate the throttled bio dispatch time upon throttle limit change
o Currently any cgroup throttle limit changes are processed asynchronousy and
  the change does not take affect till a new bio is dispatched from same group.

o It might happen that a user sets a redicuously low limit on throttling.
  Say 1 bytes per second on reads. In such cases simple operations like mount
  a disk can wait for a very long time.

o Once bio is throttled, there is no easy way to come out of that wait even if
  user increases the read limit later.

o This patch fixes it. Now if a user changes the cgroup limits, we recalculate
  the bio dispatch time according to new limits.

o Can't take queueu lock under blkcg_lock, hence after the change I wake
  up the dispatch thread again which recalculates the time. So there are some
  variables being synchronized across two threads without lock and I had to
  make use of barriers. Hoping I have used barriers correctly. Any review of
  memory barrier code especially will help.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-01 14:49:49 +02:00
Vivek Goyal 02977e4af7 blkio: Add root group to td->tg_list
o Currently all the dynamically allocated groups, except root grp is added
  to td->tg_list. This was not a problem so far but in next patch I will
  travel through td->tg_list to process any updates of limits on the group.
  If root group is not in tg_list, then root group's updates are not
  processed.

o It is better to root group also to tg_list instead of doing special
  processing for it during limit updates.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-01 14:49:48 +02:00
Vivek Goyal 8e89d13f4e blkio: Implementation of IOPS limit logic
o core logic of implementing IOPS throttling.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16 08:44:00 +02:00
Vivek Goyal e43473b7f2 blkio: Core implementation of throttle policy
o Actual implementation of throttling policy in block layer. Currently it
  implements READ and WRITE bytes per second throttling logic. IOPS throttling
  comes in later patches.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16 08:42:52 +02:00