Commit Graph

424 Commits

Author SHA1 Message Date
Jiri Kosina 1deb9d341d HID: debug: fix RCU preemption issue
Commit 2353f2bea ("HID: protect hid_debug_list") introduced mutex
locking around debug_list access to prevent SMP races when debugfs
nodes are being operated upon by multiple userspace processess.

mutex is not a proper synchronization primitive though, as the hid-debug
callbacks are being called from atomic contexts.

We also have to be careful about disabling IRQs when taking the lock
to prevent deadlock against IRQ handlers.

Benjamin reports this has also been reported in RH bugzilla as bug #958935.

 ===============================
 [ INFO: suspicious RCU usage. ]
 3.9.0+ #94 Not tainted
 -------------------------------
 include/linux/rcupdate.h:476 Illegal context switch in RCU read-side critical section!

 other info that might help us debug this:

 rcu_scheduler_active = 1, debug_locks = 0
 4 locks held by Xorg/5502:
  #0:  (&evdev->mutex){+.+...}, at: [<ffffffff81512c3d>] evdev_write+0x6d/0x160
  #1:  (&(&dev->event_lock)->rlock#2){-.-...}, at: [<ffffffff8150dd9b>] input_inject_event+0x5b/0x230
  #2:  (rcu_read_lock){.+.+..}, at: [<ffffffff8150dd82>] input_inject_event+0x42/0x230
  #3:  (&(&usbhid->lock)->rlock){-.....}, at: [<ffffffff81565289>] usb_hidinput_input_event+0x89/0x120

 stack backtrace:
 CPU: 0 PID: 5502 Comm: Xorg Not tainted 3.9.0+ #94
 Hardware name: Dell Inc. OptiPlex 390/0M5DCD, BIOS A09 07/24/2012
  0000000000000001 ffff8800689c7c38 ffffffff816f249f ffff8800689c7c68
  ffffffff810acb1d 0000000000000000 ffffffff81a03ac7 000000000000019d
  0000000000000000 ffff8800689c7c90 ffffffff8107cda7 0000000000000000
 Call Trace:
  [<ffffffff816f249f>] dump_stack+0x19/0x1b
  [<ffffffff810acb1d>] lockdep_rcu_suspicious+0xfd/0x130
  [<ffffffff8107cda7>] __might_sleep+0xc7/0x230
  [<ffffffff816f7770>] mutex_lock_nested+0x40/0x3a0
  [<ffffffff81312ac4>] ? vsnprintf+0x354/0x640
  [<ffffffff81553cc4>] hid_debug_event+0x34/0x100
  [<ffffffff81554197>] hid_dump_input+0x67/0xa0
  [<ffffffff81556430>] hid_set_field+0x50/0x120
  [<ffffffff8156529a>] usb_hidinput_input_event+0x9a/0x120
  [<ffffffff8150d89e>] input_handle_event+0x8e/0x530
  [<ffffffff8150df10>] input_inject_event+0x1d0/0x230
  [<ffffffff8150dd82>] ? input_inject_event+0x42/0x230
  [<ffffffff81512cae>] evdev_write+0xde/0x160
  [<ffffffff81185038>] vfs_write+0xc8/0x1f0
  [<ffffffff81185535>] SyS_write+0x55/0xa0
  [<ffffffff81704482>] system_call_fastpath+0x16/0x1b
 BUG: sleeping function called from invalid context at kernel/mutex.c:413
 in_atomic(): 1, irqs_disabled(): 1, pid: 5502, name: Xorg
 INFO: lockdep is turned off.
 irq event stamp: 1098574
 hardirqs last  enabled at (1098573): [<ffffffff816fb53f>] _raw_spin_unlock_irqrestore+0x3f/0x70
 hardirqs last disabled at (1098574): [<ffffffff816faaf5>] _raw_spin_lock_irqsave+0x25/0xa0
 softirqs last  enabled at (1098306): [<ffffffff8104971f>] __do_softirq+0x18f/0x3c0
 softirqs last disabled at (1097867): [<ffffffff81049ad5>] irq_exit+0xa5/0xb0
 CPU: 0 PID: 5502 Comm: Xorg Not tainted 3.9.0+ #94
 Hardware name: Dell Inc. OptiPlex 390/0M5DCD, BIOS A09 07/24/2012
  ffffffff81a03ac7 ffff8800689c7c68 ffffffff816f249f ffff8800689c7c90
  ffffffff8107ce60 0000000000000000 ffff8800689c7fd8 ffff88006a62c800
  ffff8800689c7d10 ffffffff816f7770 ffff8800689c7d00 ffffffff81312ac4
 Call Trace:
  [<ffffffff816f249f>] dump_stack+0x19/0x1b
  [<ffffffff8107ce60>] __might_sleep+0x180/0x230
  [<ffffffff816f7770>] mutex_lock_nested+0x40/0x3a0
  [<ffffffff81312ac4>] ? vsnprintf+0x354/0x640
  [<ffffffff81553cc4>] hid_debug_event+0x34/0x100
  [<ffffffff81554197>] hid_dump_input+0x67/0xa0
  [<ffffffff81556430>] hid_set_field+0x50/0x120
  [<ffffffff8156529a>] usb_hidinput_input_event+0x9a/0x120
  [<ffffffff8150d89e>] input_handle_event+0x8e/0x530
  [<ffffffff8150df10>] input_inject_event+0x1d0/0x230
  [<ffffffff8150dd82>] ? input_inject_event+0x42/0x230
  [<ffffffff81512cae>] evdev_write+0xde/0x160
  [<ffffffff81185038>] vfs_write+0xc8/0x1f0
  [<ffffffff81185535>] SyS_write+0x55/0xa0
  [<ffffffff81704482>] system_call_fastpath+0x16/0x1b

Reported-by: majianpeng <majianpeng@gmail.com>
Reported-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-06 13:07:33 +02:00
Fernando Luis Vázquez Cao c1e0ac192b HID: reintroduce fix-up for certain Sony RF receivers
It looks like the manual merge 0d69a3c731 ("Merge
branches 'for-3.9/sony' and 'for-3.9/steelseries' into for-linus") accidentally
removed Sony RF receiver with USB product id 0x0374 from the "have special
driver" list, effectively nullifying a464918419
("HID: add support for Sony RF receiver with USB product id 0x0374"). Add the
device back to the list.

Cc: stable@vger.kernel.org
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-01 14:58:14 +02:00
Jiri Kosina ad1b890e06 Merge branches 'for-3.10/wiimote' and 'for-3.9/upstream-fixes' into for-linus 2013-04-30 10:19:21 +02:00
Jiri Kosina 047dff63f9 Merge branches 'for-3.10/multitouch', 'for-3.10/roccat' and 'for-3.10/upstream' into for-linus
Conflicts:
	drivers/hid/Kconfig
2013-04-30 10:19:07 +02:00
Jiri Kosina 4f5a810429 Merge branches 'for-3.10/appleir', 'for-3.10/hid-debug', 'for-3.10/hid-driver-transport-cleanups', 'for-3.10/i2c-hid' and 'for-3.10/logitech' into for-linus 2013-04-30 10:12:44 +02:00
Jiri Kosina 2353f2bea3 HID: protect hid_debug_list
Accesses to hid_device->hid_debug_list are not serialized properly, which
could result in SMP concurrency issues when HID debugfs events are accessesed
by multiple userspace processess.

Serialize all the list operations by a mutex.

Spotted by Al Viro.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-30 10:09:31 +02:00
Benjamin Tissoires a5f04b9df1 HID: debug: break out hid_dump_report() into hid-debug
No semantic changes, but hid_dump_report should be in hid-debug.c, not
in hid-core.c

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-30 10:09:06 +02:00
Adam Jiang 89759e20d9 HID: Add PID for Japanese version of NE4K keyboard
This patche adds PID of Japanese Natual Ergonomic Keyboard 4000. HID
NE4K driver depends on this PID for determining its quirks. F14-F18 keys
would not work without the patch.

Signed-off-by: Adam Jiang <jiang.adam@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-29 10:16:55 +02:00
Benjamin Tissoires 9a4a5574ce HID: appleir: add support for Apple ir devices
This driver was originally written by James McKenzie, updated by
Greg Kroah-Hartman, further updated by Bastien Nocera, with suspend
support added.
I ported it to the HID subsystem, in order to simplify it a litle
and allow lirc to use it through hiddev.

More recent versions of the IR receiver are also supported through
a patch by Alex Karpenko. The patch also adds support for the 2nd
and 5th generation of the controller, and the menu key on newer
brushed metal remotes.

Tested-by: Fabien André <fabien.andre@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-18 19:06:20 -07:00
David Herrmann a33042fafd HID: wiimote: add 2nd generation Wii Remote IDs
This adds the 2nd generation Wii Remote IDs. They have a different
Bluetooth chipset (CSR instead of Broadcom) and are more restrictive in
what they accept as input. Hence, you need up-to-date BlueZ and
Bluetooth HIDP modules to use these devices.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-04 09:38:43 +02:00
Alexey Klimov 5b4617d820 HID: fix Masterkit MA901 hid quirks
This patch reverts commit 0322bd3980 ("usb hid quirks for Masterkit MA901 usb
radio") and adds checks in hid_ignore() for Masterkit MA901 usb radio device.
This usb radio device shares USB ID with many Atmel V-USB (and probably other)
devices so patch sorts things out by checking name, vendor, product of hid device.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-03-29 15:13:39 +01:00
Stefan Achatz 8936aa31cd HID: roccat: add support for Roccat Kone Pure gaming mouse
Userland-tools can already be found at http://sourceforge.net/projects/roccat

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-03-14 11:50:49 +01:00
Jiri Kosina 83a44ac8bf HID: Merge branch 'master' into for-3.10/hid-driver-transport-cleanups
Sync with Linus' tree. This is necessary to resolve build conflict
caused by dcd9006b1b ("HID: logitech-dj: do not directly call
hid_output_raw_report() during probe") which issues direct call to
usbhid_submit_report(), but that is gone in this branch and
hid_hw_request() has to be used instead.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-03-09 11:01:06 +01:00
Andrew de los Reyes c849a6143b HID: Separate struct hid_device's driver_lock into two locks.
This patch separates struct hid_device's driver_lock into two. The
goal is to allow hid device drivers to receive input during their
probe() or remove() function calls. This is necessary because some
drivers need to communicate with the device to determine parameters
needed during probe (e.g., size of a multi-touch surface), and if
possible, may perfer to communicate with a device on host-initiated
disconnect (e.g., to put it into a low-power state).

Historically, three functions used driver_lock:

- hid_device_probe: blocks to acquire lock
- hid_device_remove: blocks to acquire lock
- hid_input_report: if locked returns -EBUSY, else acquires lock

This patch adds another lock (driver_input_lock) which is used to
block input from occurring. The lock behavior is now:

- hid_device_probe: blocks to acq. driver_lock, then driver_input_lock
- hid_device_remove: blocks to acq. driver_lock, then driver_input_lock
- hid_input_report: if driver_input_lock locked returns -EBUSY, else
  acquires driver_input_lock

This patch also adds two helper functions to be called during probe()
or remove(): hid_device_io_start() and hid_device_io_stop(). These
functions lock and unlock, respectively, driver_input_lock; they also
make a note of whether they did so that hid-core knows if a driver has
changed the lock state.

This patch results in no behavior change for existing devices and
drivers. However, during a probe() or remove() function call in a
driver, that driver may now selectively call hid_device_io_start() to
let input events come through, then optionally call
hid_device_io_stop() to stop them.

Signed-off-by: Andrew de los Reyes <adlr@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-03-01 14:13:07 +01:00
Mika Westerberg 6399f335c2 HID: make sensor autodetection independent of underlying bus
Instead of limiting HID sensors to USB and I2C busses we can just make
everything that has usage page of HID_UP_SENSOR to be included in
HID_GROUP_SENSOR_HUB group. This allows the sensor-hub to work over
bluetooth (and other transports) as well.

Reported-by: Alexander Holler <holler@ahsoftware.de>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-By: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-02-25 13:42:36 +01:00
Linus Torvalds 21fbd5809a Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:

 - Some cleanups at V4L2 documentation

 - new drivers: ts2020 frontend, ov9650 sensor, s5c73m3 sensor,
   sh-mobile veu mem2mem driver, radio-ma901, davinci_vpfe staging
   driver

 - Lots of missing MAINTAINERS entries added

 - several em28xx driver improvements, including its conversion to
   videobuf2

 - several fixups on drivers to make them to better comply with the API

 - DVB core: add support for DVBv5 stats, allowing the implementation of
   statistics for new standards like ISDB

 - mb86a20s: add statistics to the driver

 - lots of new board additions, cleanups, and driver improvements.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (596 commits)
  [media] media: Add 0x3009 USB PID to ttusb2 driver (fixed diff)
  [media] rtl28xxu: Add USB IDs for Compro VideoMate U620F
  [media] em28xx: add usb id for terratec h5 rev. 3
  [media] media: rc: gpio-ir-recv: add support for device tree parsing
  [media] mceusb: move check earlier to make smatch happy
  [media] radio-si470x doc: add info about v4l2-ctl and sox+alsa
  [media] staging: media: Remove unnecessary OOM messages
  [media] sh_vou: Use vou_dev instead of vou_file wherever possible
  [media] sh_vou: Use video_drvdata()
  [media] drivers/media/platform/soc_camera/pxa_camera.c: use devm_ functions
  [media] mt9t112: mt9t111 format set up differs from mt9t112
  [media] sh-mobile-ceu-camera: fix SHARPNESS control default
  Revert "[media] fc0011: Return early, if the frequency is already tuned"
  [media] cx18/ivtv: fix regression: remove __init from a non-init function
  [media] em28xx: fix analog streaming with USB bulk transfers
  [media] stv0900: remove unnecessary null pointer check
  [media] fc0011: Return early, if the frequency is already tuned
  [media] fc0011: Add some sanity checks and cleanups
  [media] fc0011: Fix xin value clamping
  Revert "[media] [PATH,1/2] mxl5007 move reset to attach"
  ...
2013-02-24 17:35:10 -08:00
Jiri Kosina 0d69a3c731 Merge branches 'for-3.9/sony' and 'for-3.9/steelseries' into for-linus
Conflicts:
	drivers/hid/hid-core.c
2013-02-21 10:45:52 +01:00
Jiri Kosina 73759518d6 Merge branches 'for-3.9/logitech', 'for-3.9/multitouch', 'for-3.9/ntrig', 'for-3.9/thingm' and 'for-3.9/upstream' into for-linus 2013-02-21 10:45:01 +01:00
Vivien Didelot 30ba2fbde1 HID: add ThingM blink(1) USB RGB LED support
The ThingM blink(1) is an open source hardware USB RGB LED. It contains
an internal EEPROM, allowing to configure up to 12 light patterns. A
light pattern is a RGB color plus a fade time. This driver registers a
LED class instance with additional sysfs attributes to support basic
functions such as setting RGB colors, fade and playing. Other functions
are still accessible through the hidraw interface.

At this time, the only documentation for the device is the firmware
source code from ThingM, plus a few schematics. They are available at:

https://github.com/todbot/blink1

This patch is version 3. It updates the name of the source file, the
driver and the led sysfs entry, according to comments from Jiri Kosina
and Simon Wood.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-02-19 11:31:46 +01:00
Ian Abbott 30b6b7d8d3 HID: blacklist Velleman data acquisition boards
These are simple data acquistion boards, not HID devices and are handled
by the vmk80xx comedi driver.  At least one of them (10cf:5500)
misidentifies itself as a HID in its USB interface descriptor.  Ignore
all these devices.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-02-18 10:35:46 +01:00
Mika Westerberg fa79f5ec53 HID: extend autodetect to handle I2C sensors as well
Since the advent of HID over I2C protocol, it is possible to have sensor
hubs behind I2C bus as well. We can autodetect this in a same way than USB
sensor hubs.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-02-18 10:23:48 +01:00
Benjamin Tissoires 6d85d037d6 HID: core: add "report" hook, called once the report has been parsed
This callback is called when the parsing of the report has been done
by hid-core (so after the calls to .event). The hid drivers can now
have access to the whole report by relying on the values stored in
the different fields.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-02-05 12:07:39 +01:00
Simon Wood 75dbb9530f USB: HID: SRW-S1 Gaming Wheel Driver
Add support the SRW-S1 by patching HID descriptor to read axis
as Generic Desktop X, Y and Z (rather than Usage page being
'Simulation').

Signed-off-by: Simon Wood <simon@mungewell.org>
Tested-by: John Murphy <rosegardener@freeode.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-31 16:39:30 +01:00
Michael Karcher aaca9cc016 HID: Support Jess/Saitek Color Rumble Pad
Add support for another gamepad to the hid-pl driver.  The "color rumble pad
P580" marketed using the "Saitek" brand in Germany, and using a USB Vendor ID
attributed to "Jess" seems to be electronically identical to the 4-field
variant of the "Green Asia" gamepad.

The pad has been tested to support rumble strengths up to 255, not just 127.

Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-17 11:06:09 +01:00
Fernando Luis Vázquez Cao a464918419 HID: add support for Sony RF receiver with USB product id 0x0374
Some Vaio desktop computers, among them the VGC-LN51JGB multimedia PC, have
a RF receiver, multi-interface USB device 054c:0374, that is used to connect
a wireless keyboard and a wireless mouse.

The keyboard works flawlessly, but the mouse (VGP-WMS3 in my case) does not
seem to be generating any pointer events. The problem is that the mouse pointer
is wrongly declared as a constant non-data variable in the report descriptor
(see lsusb and usbhid-dump output below), with the consequence that it is
ignored by the HID code.

Add this device to the have-special-driver list and fix up the report
descriptor in the Sony-specific driver which happens to already have a fixup
for a similar firmware bug.

# lsusb -vd 054C:0374
Bus 003 Device 002: ID 054c:0374 Sony Corp.
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x054c Sony Corp.
  idProduct          0x0374
  iSerial                 0
[...]
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      2 Mouse
      iInterface              2 RF Receiver
[...]
          Report Descriptor: (length is 100)
[...]
            Item(Global): Usage Page, data= [ 0x01 ] 1
                            Generic Desktop Controls
            Item(Local ): Usage, data= [ 0x30 ] 48
                            Direction-X
            Item(Local ): Usage, data= [ 0x31 ] 49
                            Direction-Y
            Item(Global): Report Count, data= [ 0x02 ] 2
            Item(Global): Report Size, data= [ 0x08 ] 8
            Item(Global): Logical Minimum, data= [ 0x81 ] 129
            Item(Global): Logical Maximum, data= [ 0x7f ] 127
            Item(Main  ): Input, data= [ 0x07 ] 7
                            Constant Variable Relative No_Wrap Linear
                            Preferred_State No_Null_Position Non_Volatile Bitfield

# usbhid-dump
003:002:001:DESCRIPTOR         1357910009.758544
 05 01 09 02 A1 01 05 01 09 02 A1 02 85 01 09 01
 A1 00 05 09 19 01 29 05 95 05 75 01 15 00 25 01
 81 02 75 03 95 01 81 01 05 01 09 30 09 31 95 02
 75 08 15 81 25 7F 81 07 A1 02 85 01 09 38 35 00
 45 00 15 81 25 7F 95 01 75 08 81 06 C0 A1 02 85
 01 05 0C 15 81 25 7F 95 01 75 08 0A 38 02 81 06
 C0 C0 C0 C0

Cc: linux-input@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-15 17:01:11 +01:00
Alexey Klimov 0322bd3980 [hid] usb hid quirks for Masterkit MA901 usb radio
Don't let Masterkit MA901 USB radio be handled by usb hid drivers.
This device will be handled by radio-ma901.c driver.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-28 12:21:58 -02:00
Jiri Kosina 818b930bc1 Merge branches 'for-3.7/upstream-fixes', 'for-3.8/hidraw', 'for-3.8/i2c-hid', 'for-3.8/multitouch', 'for-3.8/roccat', 'for-3.8/sensors' and 'for-3.8/upstream' into for-linus
Conflicts:
	drivers/hid/hid-core.c
2012-12-12 21:41:55 +01:00
Alexander Holler 68fd32b822 Revert "HID: sensors: add to special driver list"
Those IDs aren't necessary anymore.

This reverts commit c8147d9ea1.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Acked-by: "Pandruvada, Srinivas" <srinivas.pandruvada@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-12 16:49:10 +01:00
Alexander Holler 83499b52c6 HID: sensors: autodetect USB HID sensor hubs
It should not be necessary to add IDs for HID sensor hubs to lists in
hid-core.c and hid-sensor-hub.c. So instead of a whitelist, autodetect such USB
HID sensor hubs, based on a collection of type physical inside a useage page of
type sensor. If some sensor hubs stil must be usable as raw devices, a
blacklist might be created.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Acked-by: "Pandruvada, Srinivas" <srinivas.pandruvada@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-12 16:49:10 +01:00
Lamarque V. Souza 4529eefad0 HID: hidp: fallback to input session properly if hid is blacklisted
This patch against kernel 3.7.0-rc8 fixes a kernel oops when turning on the
bluetooth mouse with id 0458:0058 [1].

The mouse in question supports both input and hid sessions, however it is
blacklisted in drivers/hid/hid-core.c so the input session is one that should
be used. Long ago (around kernel 3.0.0) some changes in the bluetooth
subsystem made the kernel do not fallback to input session when hid session is
not supported or blacklisted. This patch restore that behaviour by making the
kernel try the input session if hid_add_device returns ENODEV.

The patch exports hid_ignore() from hid-core.c so that it can be used in the
bluetooth subsystem.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=39882

Signed-off-by: Lamarque V. Souza <lamarque@gmail.com>
Acked-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-07 11:12:27 +01:00
Ben Hutchings f9af7b9edc HID: Add Apple wireless keyboard 2011 ANSI to special driver list
Commit 0a97e1e9f9 ('HID: apple: Add Apple wireless keyboard 2011 ANSI PID')
did not update the special driver list in hid-core.c, so hid-generic may
still bind to this device.

Reported-by: Ari Pollak <ari@scvngr.com>
References: http://bugs.debian.org/694546
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-02 21:08:43 +01:00
Benjamin Tissoires f262d1fa2c HID: add usage_index in struct hid_usage.
Currently, there is no way to know the index of the current field
in the .input_mapping and .event callbacks  when this field is inside
an array of HID fields.
This patch adds this index to the struct hid_usage so that this
information is available to input_mapping and event callbacks.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-15 10:08:14 +01:00
Benjamin Tissoires 7746383868 HID: fix unit exponent parsing
HID spec details special values for the HID field unit exponent.
Basically, the range [0x8..0xf] correspond to [-8..-1], so this is
a standard two's complement on a half-byte.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-15 10:07:55 +01:00
Forest Bond 729b814ace HID: Ignore D-WAV/eGalax devices handled by usbtouchscreen
Previously, both usbhid and usbtouchscreen would bind to D-WAV devices
with class HID and protocol None, so they would be claimed by whichever
driver was loaded first.  Some of these devices do in fact work with
usbhid, but not all of them do.  OTOH they all work with usbtouchscreen
as of commit 037a833ed0 ("Input:
usbtouchscreen - initialize eGalax devices").  So we ignore them in
usbhid to prevent getting in the way of usbtouchscreen and claiming an
interface that we may not be able to do anything useful with.

Signed-off-by: Forest Bond <forest.bond@rapidrollout.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-07 11:51:28 +01:00
Bastien Nocera 4ddfe0289b HID: Add driver for ION iCade
Add a driver for the ION iCade mini arcade cabinet [1]. The device generates a
key press and release for each joystick movement or button press or release.
For example, moving the stick to the left will generate the "A" key being
pressed and then released.

A list of all the combinations is available in the iCade developer guide [2].

This driver hides all this and makes the device work as a generic joystick.

[1]: http://www.ionaudio.com/products/details/icade
[2]: http://www.ionaudio.com/downloads/iCade_Dev_Resource_v1.3.pdf

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-31 15:52:59 +01:00
Dirk Hohndel 8d80da90f5 HID: Add support for the MacBook Pro 10,2 keyboard / touchpad
This enables the existing drivers for keyboard and touchpad with the new
USB IDs found on the MBP 13" Reasonable Resolution (also known as the
Retina Display).

Added entries to both keyboard and mouse ignore lists.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-31 10:42:33 +01:00
Stefan Achatz 4424f616e4 HID: roccat: add support for Roccat Lua
This patch adds support for Roccat Lua gaming mouse.

Userland tools can soon be found at http://sourceforge.net/projects/roccat

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-17 10:44:47 +02:00
Linus Torvalds def7cb8cd4 Staging tree update for 3.7-rc1
Here is the big staging tree update for the 3.7-rc1 merge window.
 
 There are a few patches in here that are outside of the staging area,
 namely HID and IIO patches, but all of them have been acked by the
 relevant subsystem maintainers.  The IIO stuff is still coming in
 through this tree as it hasn't entirely moved out of the staging tree,
 but is almost there.
 
 Other than that, there wa a ton of work on the comedi drivers to make
 them more readable and the correct style.  Doing that removed a lot of
 code, but we added a new driver to the staging tree, so we didn't end up
 with a net reduction this time around:
  662 files changed, 51649 insertions(+), 26582 deletions(-)
 
 All of these patches have been in the linux-next tree already.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlBp32YACgkQMUfUDdst+ymU5QCgm8KWB+dAO8ZFbmzhhm3C0VFl
 wB0AoKbDj/tCiUHkJ70u/i3OHueKkpet
 =ut2/
 -----END PGP SIGNATURE-----

Merge tag 'staging-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging tree update from Greg Kroah-Hartman:
 "Here is the big staging tree update for the 3.7-rc1 merge window.

  There are a few patches in here that are outside of the staging area,
  namely HID and IIO patches, but all of them have been acked by the
  relevant subsystem maintainers.  The IIO stuff is still coming in
  through this tree as it hasn't entirely moved out of the staging tree,
  but is almost there.

  Other than that, there wa a ton of work on the comedi drivers to make
  them more readable and the correct style.  Doing that removed a lot of
  code, but we added a new driver to the staging tree, so we didn't end
  up with a net reduction this time around:

   662 files changed, 51649 insertions(+), 26582 deletions(-)

  All of these patches have been in the linux-next tree already.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'staging-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1094 commits)
  staging: comedi: jr3_pci: fix iomem dereference
  staging: comedi: drivers: use comedi_fc.h cmdtest helpers
  Staging: winbond: usb_free_urb(NULL) is safe
  Staging: winbond: checkpatch cleanup
  Staging: winbond: Removed undesired spaces, lines and tabs
  Staging: winbond: Typo corrections in comments
  Staging: winbond: Changed c99 comments to c89 comments
  staging: r8712u: Do not queue cloned skb
  staging: comedi: ni_mio_common: always lock in ni_ai_poll()
  staging: comedi: s626: add FIXME comment
  staging: comedi: s626: don't dereference insn->data
  staging: comedi: s526: fix if() check in s526_gpct_winsn()
  staging: comedi: s626: cleanup comments in s626_initialize()
  staging: comedi: s626: remove clear of kzalloc'ed data
  staging: comedi: s626: remove 'WDInterval' from private data
  staging: comedi: s626: remove 'ChargeEnabled' from private data
  staging: comedi: s626: remove 'IsBoardRevA' comment
  staging: comedi: s626: #if 0 out the "SAA7146 BUG WORKAROUND"
  staging: comedi: s626: remove 'allocatedBuf' from private data
  staging: comedi: s626: add final attach message
  ...
2012-10-01 12:11:39 -07:00
Jiri Kosina a3cbe10e47 Merge branch 'upstream' into for-linus
Conflicts:
	drivers/hid/usbhid/hid-quirks.c
2012-10-01 14:37:51 +02:00
Jiri Kosina fa2bd30159 Merge branches 'from-henrik', 'hidraw', 'logitech', 'picolcd', 'ps3', 'uclogic', 'wacom' and 'wiimote' into for-linus 2012-10-01 14:36:26 +02:00
David Dillow 5844c1cdb6 HID: Add support for Sony PS3 BD Remote Control
The Sony PS3 Blue-ray Disc Remote Control used to be supported by the
BlueZ project's user space, but the code that handled it was recently
removed as its functionality conflicted with a real HSP implementation
and the mapping was thought to be better handled in the kernel. This is
a port of the mapping logic from the fakehid driver by Marcel Holtmann
to the in-kernel HID layer.

We also add support for the Logitech Harmony Adapter for PS3, which
emulates the BD Remote.

Signed-off-by: David Dillow <dave@thedillows.org>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-01 10:11:48 +02:00
Kevin Daughtridge 86e6b77eb7 HID: keep dev_rdesc unmodified and use it for comparisons
The dev_rdesc member of the hid_device structure is meant to store the original
report descriptor received from the device, but it is currently passed to any
report_fixup method before it is copied to the rdesc member. This patch uses a
temporary buffer to shield dev_rdesc from the side effects of many HID drivers'
report_fixup implementations.

usbhid's hid_post_reset checks the report descriptor currently returned by the
device against a descriptor that may have been modified by a driver's
report_fixup method. That leaves some devices nonfunctional after a resume, with
a "reset_resume error 1" reported. This patch checks the new descriptor against
the unmodified dev_rdesc instead and uses the original, instead of modified,
report size.

BugLink: http://bugs.launchpad.net/bugs/1049623
Signed-off-by: Kevin Daughtridge <kevin@kdau.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-01 10:09:26 +02:00
Stefan Achatz ca9bbdcc89 HID: roccat: conditional blacklisting of Roccat modules
Roccat devices are standard compatible, specific drivers are only needed
for extended functionality.
If Roccat drivers are not configured, hid-generic binds these devices now.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-17 17:27:19 +02:00
Sachin Kamat a6fbaacfb9 HID: Fix return values in open_collection()
Return -ENOMEM instead of -1 if memory allocation fails.
Return -EINVAL instead of -1 for stack overflow and
underflow errors.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-17 13:15:55 +02:00
Greg Kroah-Hartman 6a2a2cdd57 Merge 3.6-rc6 into staging-next
This pulls in the staging tree fixes in 3.6-rc6 into our branch to resolve the
merge issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-16 17:17:25 -07:00
Andres Freund aad932e75c HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured
c1dcad2d32 added a new driver configured by
HID_LENOVO_TPKBD but made the hid_have_special_driver entry non-optional which
lead to a recognized but non-working device if the new driver wasn't
configured (which is the correct default).

Signed-off-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-07 17:11:12 +02:00
srinivas pandruvada c8147d9ea1 HID: sensors: add to special driver list
Adding Intel and STM sensor hub in the list of drivers with
specialized driver.

Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-06 19:12:33 +01:00
Jiri Kosina 00315e4f53 HID: update hid_have_special_driver[] explanation
Update the comment of hid_have_special_driver[] field to reflect the fact
that multitouch devices don't need to be present there.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-02 09:32:56 +02:00
Henrik Rydberg 9bfc8da00b HID: Only dump input if someone is listening
Going through the motions of printing the debug message information
takes a long time; using the keyboard can lead to a 160 us irqsoff
latency. This patch skips hid_dump_input() when there are no open
handles, which brings latency down to 100 us.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-02 09:26:46 +02:00
Nikolai Kondrashov eb4e426a48 HID: uclogic: Add support for UC-Logic TWHA60
Add support for UC-Logic Tablet TWHA60.
It is known to be sold as Genius EasyPen M610 and Monoprice MP1060-HA60.

As this tablet has several variations with different number and different
assignments of frame buttons, they are simply mapped to F1-F24 range and are
left for users to remap in userspace.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-08-27 08:09:21 -07:00