Commit Graph

552 Commits

Author SHA1 Message Date
Linus Torvalds 9d3cae26ac Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Benjamin Herrenschmidt:
 "So from the depth of frozen Minnesota, here's the powerpc pull request
  for 3.9.  It has a few interesting highlights, in addition to the
  usual bunch of bug fixes, minor updates, embedded device tree updates
  and new boards:

   - Hand tuned asm implementation of SHA1 (by Paulus & Michael
     Ellerman)

   - Support for Doorbell interrupts on Power8 (kind of fast
     thread-thread IPIs) by Ian Munsie

   - Long overdue cleanup of the way we handle relocation of our open
     firmware trampoline (prom_init.c) on 64-bit by Anton Blanchard

   - Support for saving/restoring & context switching the PPR (Processor
     Priority Register) on server processors that support it.  This
     allows the kernel to preserve thread priorities established by
     userspace.  By Haren Myneni.

   - DAWR (new watchpoint facility) support on Power8 by Michael Neuling

   - Ability to change the DSCR (Data Stream Control Register) which
     controls cache prefetching on a running process via ptrace by
     Alexey Kardashevskiy

   - Support for context switching the TAR register on Power8 (new
     branch target register meant to be used by some new specific
     userspace perf event interrupt facility which is yet to be enabled)
     by Ian Munsie.

   - Improve preservation of the CFAR register (which captures the
     origin of a branch) on various exception conditions by Paulus.

   - Move the Bestcomm DMA driver from arch powerpc to drivers/dma where
     it belongs by Philippe De Muyter

   - Support for Transactional Memory on Power8 by Michael Neuling
     (based on original work by Matt Evans).  For those curious about
     the feature, the patch contains a pretty good description."

(See commit db8ff907027b: "powerpc: Documentation for transactional
memory on powerpc" for the mentioned description added to the file
Documentation/powerpc/transactional_memory.txt)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (140 commits)
  powerpc/kexec: Disable hard IRQ before kexec
  powerpc/85xx: l2sram - Add compatible string for BSC9131 platform
  powerpc/85xx: bsc9131 - Correct typo in SDHC device node
  powerpc/e500/qemu-e500: enable coreint
  powerpc/mpic: allow coreint to be determined by MPIC version
  powerpc/fsl_pci: Store the pci ctlr device ptr in the pci ctlr struct
  powerpc/85xx: Board support for ppa8548
  powerpc/fsl: remove extraneous DIU platform functions
  arch/powerpc/platforms/85xx/p1022_ds.c: adjust duplicate test
  powerpc: Documentation for transactional memory on powerpc
  powerpc: Add transactional memory to pseries and ppc64 defconfigs
  powerpc: Add config option for transactional memory
  powerpc: Add transactional memory to POWER8 cpu features
  powerpc: Add new transactional memory state to the signal context
  powerpc: Hook in new transactional memory code
  powerpc: Routines for FP/VSX/VMX unavailable during a transaction
  powerpc: Add transactional memory unavaliable execption handler
  powerpc: Add reclaim and recheckpoint functions for context switching transactional memory processes
  powerpc: Add FP/VSX and VMX register load functions for transactional memory
  powerpc: Add helper functions for transactional memory context switching
  ...
2013-02-23 17:09:55 -08:00
Benjamin Herrenschmidt 877d66856e Merge remote-tracking branch 'kumar/next' into next
<<
Mostly misc code cleanups in various board ports and adding support for a
new MPC85xx board - ppa8548.
>>
2013-02-19 11:51:39 -06:00
Stef van Os e0e8398e3a powerpc/85xx: Board support for ppa8548
Initial board support for the Prodrive PPA8548 AMC module. Board
is an MPC8548 AMC platform used in RapidIO systems. This module is
also used to test/work on mainline linux RapidIO software.

PPA8548 overview:
- 1.3 GHz Freescale PowerQUICC III MPC8548 processor
- 1 GB DDR2 @ 266 MHz
- 8 MB NOR flash
- Serial RapidIO 1.2
- 1 x 10/100/1000 BASE-T front ethernet
- 1 x 1000 BASE-BX ethernet on AMC connector

Signed-off-by: Stef van Os <stef.van.os@prodrive.nl>
Acked-by: Timur Tabi <timur@tabi.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-02-15 13:54:10 -06:00
Michael Neuling 81afe7d101 powerpc: Add transactional memory to pseries and ppc64 defconfigs
Signed-off-by: Matt Evans <matt@ozlabs.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-15 17:02:25 +11:00
Geoff Levand 69fde0210e powerpc/ps3: Refresh ps3_defconfig
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-15 16:54:45 +11:00
Holger Brunck ed59b3eca0 powerpc/83xx: update kmeter1_defconfig
Synchronize this defconfig with latest kernel version.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-02-13 07:49:08 -06:00
Paul Gortmaker d5bc813f40 powerpc/85xx: enable MTD options in sbc8548 defconfig
This board has soldered on flash, and a SODIMM flash module.
Both can be used for booting, via switching JP12 and SW2.8
and using the sbc8548-altflash.dts when booting from SODIMM.

Here we enable MTD in kernel so that we can see the bootloader
(and other flash sectors) from linux.

Normal configuration:

 root@sbc8548:~# cat /proc/mtd
 dev:    size   erasesize  name
 mtd0: 007a0000 00020000 "space"
 mtd1: 00060000 00020000 "bootloader"
 mtd2: 03f00000 00080000 "space"
 mtd3: 00100000 00080000 "bootloader"
 root@sbc8548:~# dd if=/dev/mtd1 count=1 bs=48|hexdump -C
 1+0 records in
 1+0 records out
 00000000  27 05 19 56 55 2d 42 6f  6f 74 20 32 30 31 32 2e  |'..VU-Boot 2012.|
 00000010  31 30 2d 64 69 72 74 79  20 28 4a 61 6e 20 31 39  |10-dirty (Jan 19|
 00000020  20 32 30 31 33 20 2d 20  31 39 3a 34 30 3a 31 31  | 2013 - 19:40:11|
 00000030
 root@sbc8548:~# dd if=/dev/mtd3 count=1 bs=48|hexdump -C
 1+0 records in
 1+0 records out
 00000000  27 05 19 56 55 2d 42 6f  6f 74 20 32 30 31 32 2e  |'..VU-Boot 2012.|
 00000010  31 30 2d 64 69 72 74 79  20 28 44 65 63 20 31 33  |10-dirty (Dec 13|
 00000020  20 32 30 31 32 20 2d 20  31 35 3a 30 30 3a 30 37  | 2012 - 15:00:07|
 00000030
 root@sbc8548:~#

Alternate configuration, with sbc8548-altflash.dts:

 root@sbc8548:~# cat /proc/mtd
 dev:    size   erasesize  name
 mtd0: 03f00000 00080000 "space"
 mtd1: 00100000 00080000 "bootloader"
 mtd2: 007a0000 00020000 "space"
 mtd3: 00060000 00020000 "bootloader"
 root@sbc8548:~# dd if=/dev/mtd1 count=1 bs=48|hexdump -C
 1+0 records in
 1+0 records out
 00000000  27 05 19 56 55 2d 42 6f  6f 74 20 32 30 31 32 2e  |'..VU-Boot 2012.|
 00000010  31 30 2d 64 69 72 74 79  20 28 44 65 63 20 31 33  |10-dirty (Dec 13|
 00000020  20 32 30 31 32 20 2d 20  31 35 3a 30 30 3a 30 37  | 2012 - 15:00:07|
 00000030
 root@sbc8548:~# dd if=/dev/mtd3 count=1 bs=48|hexdump -C
 1+0 records in
 1+0 records out
 00000000  27 05 19 56 55 2d 42 6f  6f 74 20 32 30 31 32 2e  |'..VU-Boot 2012.|
 00000010  31 30 2d 64 69 72 74 79  20 28 4a 61 6e 20 31 39  |10-dirty (Jan 19|
 00000020  20 32 30 31 33 20 2d 20  31 39 3a 34 30 3a 31 31  | 2013 - 19:40:11|
 00000030
 root@sbc8548:~#

Note that in the latter, the larger SODIMM device appears 1st,
as mtd0 and mtd1, as indicated in the sizes, and in the date
of the u-boot image.

The kernel configuration is the same in both cases; only the dtb
needs to be changed in accordance with the JP12/SW2.8 settings.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-02-13 07:49:00 -06:00
Scott Wood 34f364fef4 powerpc/fsl: Remove CONFIG_IRQ_ALL_CPUS from mpc85xx/mpc86xx defconfig
While this should be harmless now that distribute_irqs
obeys MPIC_SINGLE_DEST_CPU, there's no reason to enable this
on mpc85xx/mpc86xx since MPIC_SINGLE_DEST_CPU will always be set.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-29 11:35:05 +11:00
Frederic Weisbecker abf917cd91 cputime: Generic on-demand virtual cputime accounting
If we want to stop the tick further idle, we need to be
able to account the cputime without using the tick.

Virtual based cputime accounting solves that problem by
hooking into kernel/user boundaries.

However implementing CONFIG_VIRT_CPU_ACCOUNTING require
low level hooks and involves more overhead. But we already
have a generic context tracking subsystem that is required
for RCU needs by archs which plan to shut down the tick
outside idle.

This patch implements a generic virtual based cputime
accounting that relies on these generic kernel/user hooks.

There are some upsides of doing this:

- This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING
if context tracking is already built (already necessary for RCU in full
tickless mode).

- We can rely on the generic context tracking subsystem to dynamically
(de)activate the hooks, so that we can switch anytime between virtual
and tick based accounting. This way we don't have the overhead
of the virtual accounting when the tick is running periodically.

And one downside:

- There is probably more overhead than a native virtual based cputime
accounting. But this relies on hooks that are already set anyway.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
2013-01-27 19:23:27 +01:00
Anton Blanchard 0b9fd94a1c powerpc: Enable devtmpfs, EFI partition support and tmpfs ACLs on pseries, ppc64 and ppc64e defconfig
We need devtmpfs enabled to boot on recent versions of Fedora. EFI
partitions will be useful for large block devices. tmpfs ACL support
is used by some distros for managing access to devices.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-10 17:01:25 +11:00
Anton Blanchard f648ef2c1f powerpc: Cleanup NLS config options on pseries, ppc64 and ppc64e defconfig
Set CONFIG_NLS_DEFAULT to utf8. The distros do this (eg ppc64 FC17
and RHEL6) as well as the x86 defconfigs. Userspace these days is
most likely to expect utf8 anyway.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-10 17:01:22 +11:00
Anton Blanchard e6fde82224 powerpc: Run savedefconfig over pseries, ppc64 and ppc64e defconfig
No changes, just update the configs with savedefconfig.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-10 17:01:19 +11:00
Olof Johansson e95e09ce67 powerpc/pasemi: Enable PRINTK_TIME in defconfig
Enable PRINTK_TIME in pasemi_defconfig. Also regenerate it, it seems
that a lot of options have moved around since last time savedefconfig
was ran on it.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-10 17:00:22 +11:00
Nishanth Aravamudan be812195d8 powerpc/pseries: Double NR_CPUS in defconfig
Anticipating growth in coming years, we should ensure we are getting a
good lead on testing.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 12:59:17 +11:00
David Woodhouse ffe3150125 UAPI Disintegration 2012-10-09
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUHPmWhOxKuMESys7AQLCZRAAsZAuAK0MxZ4iuq/+fmy7Uxb1jrzLOYSb
 3UgbTgXAjR0WAUHNegVZLX1Xc+12KxvMCj/8sO62Ai+wtgHeDAuUl2T0FbSZjlGK
 qqx/qQqTFHUfJRbm3Lu9iarZ2K49v1kTDk4C+nC8J9mEEW4WFlVPD10n90j+4hxr
 ZCEYril7qOQQV65oor3BT2V64+X1WDHriTLugH1o8RziRF9jh6Z2hgZAWnThcGxu
 lPsmXF2e7jDqGcM3gWtxZWu/yTBPxw549R+JUg4aVKho9WI5ClyjNAKnE7wtd3iW
 HyrylRH+ch2oeYFa5+xoyopRARUUPmujKaHU+ZI1o++eNzuw5JYiwuMlZBLyUc9I
 foWMSUw31U7695exyf66HiH7GEKI1PVpgJVNu41eJvl0iWSWCpKCB6Gs8Sw4xnp2
 auUCYSniXHNTFhFktjNdIUAn0+1X/b/SEfb/id4GvLp1K98QGOfe8dMCC8hEnXiF
 4iIViM8Sv1GB1us5huSjbMeRPbZ3x/loqEpApfgcaqcyrUR29FTE/lFQ4fj9xviL
 JjckPLMMZb4Ho5wrkCi5NtXJ16mx1qKzbBGDdqzmqaNdN+08rNF//kA9m9hCwgD8
 XfAV286DKDC0SllZIG+Uz7YLnSZjNAUhjvWN3ipV+SdT5DGybL3uSW5tYiSAzI2E
 3cayGTWINMg=
 =U9Qq
 -----END PGP SIGNATURE-----

Merge tag 'disintegrate-mtd-20121009' of git://git.infradead.org/users/dhowells/linux-headers

UAPI Disintegration 2012-10-09

Conflicts:
	MAINTAINERS
	arch/arm/configs/bcmring_defconfig
	arch/arm/mach-imx/clk-imx51-imx53.c
	drivers/mtd/nand/Kconfig
	drivers/mtd/nand/bcm_umi_nand.c
	drivers/mtd/nand/nand_bcm_umi.h
	drivers/mtd/nand/orion_nand.c
2012-10-09 15:04:25 +01:00
Linus Torvalds 5f3d2f2e1a Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Benjamin Herrenschmidt:
 "Some highlights in addition to the usual batch of fixes:

   - 64TB address space support for 64-bit processes by Aneesh Kumar

   - Gavin Shan did a major cleanup & re-organization of our EEH support
     code (IBM fancy PCI error handling & recovery infrastructure) which
     paves the way for supporting different platform backends, along
     with some rework of the PCIe code for the PowerNV platform in order
     to remove home made resource allocations and instead use the
     generic code (which is possible after some small improvements to it
     done by Gavin).

   - Uprobes support by Ananth N Mavinakayanahalli

   - A pile of embedded updates from Freescale folks, including new SoC
     and board supports, more KVM stuff including preparing for 64-bit
     BookE KVM support, ePAPR 1.1 updates, etc..."

Fixup trivial conflicts in drivers/scsi/ipr.c

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits)
  powerpc/iommu: Fix multiple issues with IOMMU pools code
  powerpc: Fix VMX fix for memcpy case
  driver/mtd:IFC NAND:Initialise internal SRAM before any write
  powerpc/fsl-pci: use 'Header Type' to identify PCIE mode
  powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get
  powerpc: Remove tlb batching hack for nighthawk
  powerpc: Set paca->data_offset = 0 for boot cpu
  powerpc/perf: Sample only if SIAR-Valid bit is set in P7+
  powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled
  powerpc/mpc85xx: Update interrupt handling for IFC controller
  powerpc/85xx: Enable USB support in p1023rds_defconfig
  powerpc/smp: Do not disable IPI interrupts during suspend
  powerpc/eeh: Fix crash on converting OF node to edev
  powerpc/eeh: Lock module while handling EEH event
  powerpc/kprobe: Don't emulate store when kprobe stwu r1
  powerpc/kprobe: Complete kprobe and migrate exception frame
  powerpc/kprobe: Introduce a new thread flag
  powerpc: Remove unused __get_user64() and __put_user64()
  powerpc/eeh: Global mutex to protect PE tree
  powerpc/eeh: Remove EEH PE for normal PCI hotplug
  ...
2012-10-06 03:16:12 +09:00
Linus Torvalds d66e6737d4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 - Optimised AES/SHA1 for ARM.
 - IPsec ESN support in talitos and caam.
 - x86_64/avx implementation of cast5/cast6.
 - Add/use multi-algorithm registration helpers where possible.
 - Added IBM Power7+ in-Nest support.
 - Misc fixes.

Fix up trivial conflicts in crypto/Kconfig due to the sparc64 crypto
config options being added next to the new ARM ones.

[ Side note: cut-and-paste duplicate help texts make those conflicts
  harder to read than necessary, thanks to git being smart about
  minimizing conflicts and maximizing the common parts... ]

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
  crypto: x86/glue_helper - fix storing of new IV in CBC encryption
  crypto: cast5/avx - fix storing of new IV in CBC encryption
  crypto: tcrypt - add missing tests for camellia and ghash
  crypto: testmgr - make test_aead also test 'dst != src' code paths
  crypto: testmgr - make test_skcipher also test 'dst != src' code paths
  crypto: testmgr - add test vectors for CTR mode IV increasement
  crypto: testmgr - add test vectors for partial ctr(cast5) and ctr(cast6)
  crypto: testmgr - allow non-multi page and multi page skcipher tests from same test template
  crypto: caam - increase TRNG clocks per sample
  crypto, tcrypt: remove local_bh_disable/enable() around local_irq_disable/enable()
  crypto: tegra-aes - fix error return code
  crypto: crypto4xx - fix error return code
  crypto: hifn_795x - fix error return code
  crypto: ux500 - fix error return code
  crypto: caam - fix error IDs for SEC v5.x RNG4
  hwrng: mxc-rnga - Access data via structure
  hwrng: mxc-rnga - Adapt clocks to new i.mx clock framework
  crypto: caam - add IPsec ESN support
  crypto: 842 - remove .cra_list initialization
  Revert "[CRYPTO] cast6: inline bloat--"
  ...
2012-10-04 09:06:34 -07:00
Huang Shijie b8c4bf2610 defconfigs: remove CONFIG_MTD_NAND_VERIFY_WRITE
CONFIG_MTD_NAND_VERIFY_WRITE was killed recently, so remove it from
defconfigs as well.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29 15:00:49 +01:00
Chunhe Lan 1919aac36c powerpc/85xx: Enable USB support in p1023rds_defconfig
Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-19 08:38:16 -05:00
Benjamin Herrenschmidt caa1d631fc Merge remote-tracking branch 'kumar/next' into next 2012-09-18 16:04:33 +10:00
Michael Neuling b92a66a65c powerpc: Add denormalisation exception handling for POWER6/7
On POWER6 and POWER7 if the input operand to an instruction is a
denormalised single precision binary floating point value we can take
a denormalisation exception where it's expected that the hypervisor
(HV=1) will fix up the inputs before the instruction is run.

This adds code to handle this denormalisation exception for POWER6 and
POWER7.

It also add a CONFIG_PPC_DENORMALISATION option and sets it in
pseries/ppc64_defconfig.

This is useful on bare metal systems only.  Based on patch from Milton
Miller.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-17 16:31:47 +10:00
David S. Miller b48b63a1f6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	net/netfilter/nfnetlink_log.c
	net/netfilter/xt_LOG.c

Rather easy conflict resolution, the 'net' tree had bug fixes to make
sure we checked if a socket is a time-wait one or not and elide the
logging code if so.

Whereas on the 'net-next' side we are calculating the UID and GID from
the creds using different interfaces due to the user namespace changes
from Eric Biederman.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-15 11:43:53 -04:00
Timur Tabi 34f84b5b5b powerpc/85xx: introduce support for the Freescale / iVeia P1022RDK
The Freescale / iVeia P1022RDK reference board is a small-factor board
with a Freescale P1022 SOC.  It includes:

1) 512 MB 64-bit DDR3-800 (max) memory
2) 8MB SPI serial flash memory for boot loader
3) Bootable 4-bit SD/MMC port
4) Two 10/100/1000 Ethernet connectors
5) One SATA port
6) Two USB ports
7) One PCIe x4 slot
8) DVI video connector
9) Audio input and output jacks, powered by a Wolfson WM8960 codec.

Unlike the P1022DS, the P1022RDK does not have any localbus devices,
presumably because of the localbus / DIU multiplexing restriction of
the P1022 SOC.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12 14:57:07 -05:00
Timur Tabi 4c30c143f0 powerpc/85xx: Add support for P5040DS board
Add support for the Freescale P5040DS Reference Board ("Superhydra"), which
is similar to the P5020DS.  Features of the P5040 are listed below, but
not all of these features (e.g. DPAA networking) are currently supported.

Four P5040 single-threaded e5500 cores built
    Up to 2.4 GHz with 64-bit ISA support
    Three levels of instruction: user, supervisor, hypervisor
CoreNet platform cache (CPC)
    2.0 MB configures as dual 1 MB blocks hierarchical interconnect fabric
Two 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
 support Up to 1600MT/s
    Memory pre-fetch engine
DPAA incorporating acceleration for the following functions
    Packet parsing, classification, and distribution (FMAN)
    Queue management for scheduling, packet sequencing and
	congestion management (QMAN)
    Hardware buffer management for buffer allocation and
	de-allocation (BMAN)
    Cryptography acceleration (SEC 5.0) at up to 40 Gbps SerDes
    20 lanes at up to 5 Gbps
    Supports SGMII, XAUI, PCIe rev1.1/2.0, SATA Ethernet interfaces
    Two 10 Gbps Ethernet MACs
    Ten 1 Gbps Ethernet MACs
High-speed peripheral interfaces
    Two PCI Express 2.0/3.0 controllers
Additional peripheral interfaces
    Two serial ATA (SATA 2.0) controllers
    Two high-speed USB 2.0 controllers with integrated PHY
    Enhanced secure digital host controller (SD/MMC/eMMC)
    Enhanced serial peripheral interface (eSPI)
    Two I2C controllers
    Four UARTs
    Integrated flash controller supporting NAND and NOR flash
DMA
    Dual four channel
Support for hardware virtualization and partitioning enforcement
    Extra privileged level for hypervisor support
QorIQ Trust Architecture 1.1
    Secure boot, secure debug, tamper detection, volatile key storage

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12 14:57:07 -05:00
Cong Wang 965505015b netfilter: remove xt_NOTRACK
It was scheduled to be removed for a long time.

Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netfilter@vger.kernel.org
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-09-03 13:36:40 +02:00
Benjamin Herrenschmidt 2c39bf49fd Revert "powerpc: Update g5_defconfig"
This reverts commit b1acf1bb54.

Something went horribly wrong when I did savedefconfig, not sure what,
but what's in there is busted so let's revert it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24 20:55:55 +10:00
Kim Phillips 1267643dc3 powerpc/fsl: fix "Failed to mount /dev: No such device" errors
Yocto (Built by Poky 7.0) 1.2 root filesystems fail to boot,
at least over nfs, with:

Failed to mount /dev: No such device

Configuring DEVTMPFS fixes it.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-08-23 10:46:20 -05:00
Kim Phillips 823f74733d powerpc/fsl: update defconfigs
run make savedefconfig on fsl defconfigs.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-08-23 10:46:15 -05:00
Zhao Chenhui 8e90e4cc33 powerpc/85xx: mpc85xx_defconfig - add VIA PATA support for MPC85xxCDS
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-08-10 07:46:45 -05:00
Seth Jennings 322cacce0a powerpc/crypto: rework Kconfig
This patch creates a new submenu for the NX cryptographic
hardware accelerator and breaks the NX options into their own
Kconfig file under drivers/crypto/nx/Kconfig.

This will permit additional NX functionality to be easily
and more cleanly added in the future without touching
drivers/crypto/Makefile|Kconfig.

Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-08-01 17:47:52 +08:00
Andrew Morton c255a45805 memcg: rename config variables
Sanity:

CONFIG_CGROUP_MEM_RES_CTLR -> CONFIG_MEMCG
CONFIG_CGROUP_MEM_RES_CTLR_SWAP -> CONFIG_MEMCG_SWAP
CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED -> CONFIG_MEMCG_SWAP_ENABLED
CONFIG_CGROUP_MEM_RES_CTLR_KMEM -> CONFIG_MEMCG_KMEM

[mhocko@suse.cz: fix missed bits]
Cc: Glauber Costa <glommer@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:43 -07:00
Anton Blanchard fd297b3a73 powerpc: Enable pseries hardware RNG and crypto modules
Enable the hardware RNG and crypto modules. I verified they both
autoload via the VIO subsystem, so there is no need to build them in.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-27 11:42:32 +10:00
Benjamin Herrenschmidt b1acf1bb54 powerpc: Update g5_defconfig
This updates the g5 defconfig to include nouveau instead of nvidiafb
(which works much better nowadays, in fact the latter crashes on modern
distros), and to set CONFIG_VT_HW_CONSOLE_BINDING without which takeover
from the firmware offb by nouveau doesn't work properly (and leads to
unexplained black screens for some users).

The rest is churn of going through defconfig / savedefconfig

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-27 11:42:32 +10:00
Shengzhou Liu 478a4829d8 powerpc/85xx: Update corenet64_smp_defconfig
Enable USB, MMC, SATA, LBC, MTD, NAND, SPI, PCIe, EDAC, VFAT, NFS, etc.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-11 07:45:50 -05:00
Shengzhou Liu 9d23298734 powerpc/85xx: Update corenet32_smp_defconfig
- Enable NAND support
 - Enable CONFIG_PCI_MSI and CONFIG_MMC_SDHCI_OF

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-11 07:45:43 -05:00
Timur Tabi ab2aba4743 Revert "powerpc/p3060qds: Add support for P3060QDS board"
This reverts commit 96cc017c5b.

The P3060 was cancelled before it went into production, so there's no point
in supporting it.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-10 07:07:22 -05:00
Paul Gortmaker b048b4e17c powerpc: remove Wind River SBC8560 support
This reference board dates back to 2004, and is largely a legacy
EOL product.  The MPC8560 is a pre e500v2 CPU.  The SBC8548 is
a more modern, better e500v2 target for people to use as a
reference board with today's kernels, should they require one.

Removing support for it will also allow us to remove some
sbc8560 specific quirk handling in 8250 UART code, and some
MTD mapping support.

Cc: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-10 07:07:21 -05:00
Holger Brunck 5d1d67e361 powerpc/82xx: add SPI support for mgcoge
Add spi support for mgcoge into the platform code and the dts
file. Additionaly SPIDEV is switched on in the defconfig and the
updates for the newer kernel version are committed. The SPI
interface is used to drive the Maxim DS3106 clock chip.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-10 07:07:20 -05:00
Holger Brunck 7ee0bf5336 powerpc/83xx: update defconfig for kmeter1
Switch on UBIFS, HOTPLUG and TIPC and update the config to
the latest kernel version.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-10 07:07:20 -05:00
Shengzhou Liu 5a9e0d2e7a powerpc/85xx: Enable MTD/NOR/NAND options by default in defconfig
Enable MTD/NOR/NAND options by default in mpc85xx_defconfig and
mpc85xx_smp_defconfig to support NOR, NAND flash.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-10 07:07:19 -05:00
Kim Phillips a6fceddd7b powerpc/fsl: Distribute interrupts on all CPUs by default
At least for crypto/IPSec, doing so provides users with a better
performance experience out of the box.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-10 07:07:19 -05:00
Michael Ellerman db9112173b powerpc: Turn on BPF_JIT in ppc64_defconfig
Matt added BPF_JIT support in commit 0ca87f05, but currently none of our
defconfigs build it. Turn that sucker on.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-10 19:19:02 +10:00
Anton Blanchard 641bd53a61 powerpc: Enable jump label support
When looking through some instruction traces I noticed our tracepoint
checks were inline. It turns out we don't have CONFIG_JUMP_LABEL
enabled.

By enabling CONFIG_JUMP_LABEL we replace a load/compare/branch with
a nop at every tracepoint call. For example in do_IRQ:

CONFIG_JUMP_LABEL disabled:
        stdx 3,11,9
        lwz 0,8(29)
        cmpwi 7,0,0
        bne- 7,.L124
        bl .irq_enter

CONFIG_JUMP_LABEL enabled:
        stdx 3,11,9
        nop
        bl .irq_enter

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:40 +10:00
Linus Torvalds 2e341ca686 Sound updates for 3.5-rc1
This is the first big chunk for 3.5 merges of sound stuff.
 There are a few big changes in different areas.  First off, the
 streaming logic of USB-audio endpoints has been largely rewritten
 for the better support of "implicit feedback".  If anything about USB
 got broken, this change has to be checked.
 
 For HD-audio, the resume procedure was changed; instead of delaying
 the resume of the hardware until the first use, now waking up immediately
 at resume.  This is for buggy BIOS.
 
 For ASoC, dynamic PCM support and the improved support for digital links
 between off-SoC devices are major framework changes.
 
 Some highlights are below:
 
 * HD-audio
 - Avoid the accesses of invalid pin-control bits that may stall the codec
 - V-ref setup cleanups
 - Fix the races in power-saving code
 - Fix the races in codec cache hashes and connection lists
 - Split some common codes for BIOS auto-parser to hda_auto_parser.c
 - Changed the PM resume code to wake up immediately for buggy BIOS
 - Creative SoundCore3D support
 - Add Conexant CX20751/2/3/4 codec support
 
 * ASoC
 - Dynamic PCM support, allowing support for SoCs with internal routing
   through components with tight sequencing and formatting constraints
   within their internal paths or where there are multiple components
   connected with CPU managed DMA controllers inside the SoC.
 - Greatly improved support for direct digital links between off-SoC
   devices, providing a much simpler way of connecting things like digital
   basebands to CODECs.
 - Much more fine grained and robust locking, cleaning up some of the
   confusion that crept in with multi-component.
 - CPU support for nVidia Tegra 30 I2S and audio hub controllers and
   ST-Ericsson MSP I2S controolers
 - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124, Texas
   Instruments LM49453.
 - Some regmap changes needed by the Tegra I2S driver.
 - mc13783 audio support.
 
 * Misc
 - Rewrite with module_pci_driver()
 - Xonar DGX support for snd-oxygen
 - Improvement of packet handling in snd-firewire driver
 - New USB-endpoint streaming logic
 - Enhanced M-audio FTU quirks and relevant cleanups
 - Increment the support of OSS devices to 256
 - snd-aloop accuracy improvement
 
 There are a few more pending changes for 3.5, but they will be
 sent slightly later as partly depending on the changes of DRM.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJPvD/9AAoJEGwxgFQ9KSmkPsIP/AuBGpAZy7b7FiEEIy1Hhdws
 US8WVuPzyDslMVdzZ8OFqyPXanIcL9gscoOGMZOEy7UFtMBiR4GuYiPRPubEMxuP
 /gopUqK4SqIsIwT238qqYszSJSxE7gNEZ/2jhSGtkX4EkaSZ4bAskn0iOKX5uw2f
 kTUQknA1rNLIGba2z6rJbgIW7hdxGfpFy05ruv3ct81nO+5JlgyLuP/v5R6jL+do
 cum0N4dJFRd9YSEi2BG612gdz8LJyzOgPqBKmxMEva6BfqLkR8EdP80FtE3eEOiP
 Et1q2LhZwOlBt0BEjsjjOVxMsgxVax6ps9cuNRTk5ECEOldU5dbDatC45L/e9mSD
 OQVUjYAX1mQAtYva4U4PPn6WU6ma2L5yjy4peCObtyCMkEchXk1bfs4CEfVqCXUP
 yFYN8C+y6osZOyWE3+Enn9ifZdWyLeSVq6CT33Yt+fyKlswp6gRkhKYiEPqTA5aU
 p71X59Pp7q1y3tQwiMJNpf2QdkxuxfKURHswdc4BS9ct0mdZhQX0GyDS7OffkTd4
 Lq5UkVMHA1rLlF9oRPd2C9P4BuMEuvLjf662YCKiw+mWFYdBC036DHLLjm1Hcwuj
 UkpQ2PSrrdHG1u0c3ooZ9dQj1BNX4LoABLqvaMtce6sESD/hJ5gcprYJWvtituwM
 ZzZiJavIWsoJ+SWQWBHe
 =+JSm
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This is the first big chunk for 3.5 merges of sound stuff.

  There are a few big changes in different areas.  First off, the
  streaming logic of USB-audio endpoints has been largely rewritten for
  the better support of "implicit feedback".  If anything about USB got
  broken, this change has to be checked.

  For HD-audio, the resume procedure was changed; instead of delaying
  the resume of the hardware until the first use, now waking up
  immediately at resume.  This is for buggy BIOS.

  For ASoC, dynamic PCM support and the improved support for digital
  links between off-SoC devices are major framework changes.

  Some highlights are below:

  * HD-audio
   - Avoid accesses of invalid pin-control bits that may stall the codec
   - V-ref setup cleanups
   - Fix the races in power-saving code
   - Fix the races in codec cache hashes and connection lists
   - Split some common codes for BIOS auto-parser to hda_auto_parser.c
   - Changed the PM resume code to wake up immediately for buggy BIOS
   - Creative SoundCore3D support
   - Add Conexant CX20751/2/3/4 codec support

  * ASoC
   - Dynamic PCM support, allowing support for SoCs with internal
     routing through components with tight sequencing and formatting
     constraints within their internal paths or where there are multiple
     components connected with CPU managed DMA controllers inside the
     SoC.
   - Greatly improved support for direct digital links between off-SoC
     devices, providing a much simpler way of connecting things like
     digital basebands to CODECs.
   - Much more fine grained and robust locking, cleaning up some of the
     confusion that crept in with multi-component.
   - CPU support for nVidia Tegra 30 I2S and audio hub controllers and
     ST-Ericsson MSP I2S controolers
   - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124,
     Texas Instruments LM49453.
   - Some regmap changes needed by the Tegra I2S driver.
   - mc13783 audio support.

  * Misc
   - Rewrite with module_pci_driver()
   - Xonar DGX support for snd-oxygen
   - Improvement of packet handling in snd-firewire driver
   - New USB-endpoint streaming logic
   - Enhanced M-audio FTU quirks and relevant cleanups
   - Increment the support of OSS devices to 256
   - snd-aloop accuracy improvement

  There are a few more pending changes for 3.5, but they will be sent
  slightly later as partly depending on the changes of DRM."

Fix up conflicts in regmap (due to duplicate patches, with some further
updates then having already come in from the regmap tree).  Also some
fairly trivial context conflicts in the imx and mcx soc drivers.

* tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits)
  ALSA: snd-usb: fix stream info output in /proc
  ALSA: pcm - Add proper state checks to snd_pcm_drain()
  ALSA: sh: Fix up namespace collision in sh_dac_audio.
  ALSA: hda/realtek - Fix unused variable compile warning
  ASoC: sh: fsi: enable chip specific data transfer mode
  ASoC: sh: fsi: call fsi_hw_startup/shutdown from fsi_dai_trigger()
  ASoC: sh: fsi: use same format for IN/OUT
  ASoC: sh: fsi: add fsi_version() and removed meaningless version check
  ASoC: sh: fsi: use register field macro name on IN/OUT_DMAC
  ASoC: tegra: Add machine driver for WM8753 codec
  ALSA: hda - Fix possible races of accesses to connection list array
  ASoC: OMAP: HDMI: Introduce codec
  ARM: mx31_3ds: Add sound support
  ASoC: imx-mc13783 cleanup
  mx31moboard: Add sound support
  ASoC: mc13783 codec cleanups
  ASoC: add imx-mc13783 sound support
  ASoC: Add mc13783 codec
  mfd: mc13xxx: add codec platform data
  ASoC: don't flip master of DT-instantiated DAI links
  ...
2012-05-23 13:05:43 -07:00
Linus Torvalds 6f73b3629f Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Benjamin Herrenschmidt:
 "Here are the powerpc goodies for 3.5.  Main highlights are:

   - Support for the NX crypto engine in Power7+
   - A bunch of Anton goodness, including some micro optimization of our
     syscall entry on Power7
   - I converted a pile of our thermal control drivers to the new i2c
     APIs (essentially turning the old therm_pm72 into a proper set of
     windfarm drivers).  That's one more step toward removing the
     deprecated i2c APIs, there's still a few drivers to fix, but we are
     getting close
   - kexec/kdump support for 47x embedded cores

  The big missing thing here is no updates from Freescale.  Not sure
  what's up here, but with Kumar not working for them anymore things are
  a bit in a state of flux in that area."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (71 commits)
  powerpc: Fix irq distribution
  Revert "powerpc/hw-breakpoint: Use generic hw-breakpoint interfaces for new PPC ptrace flags"
  powerpc: Fixing a cputhread code documentation
  powerpc/crypto: Enable the PFO-based encryption device
  powerpc/crypto: Build files for the nx device driver
  powerpc/crypto: debugfs routines and docs for the nx device driver
  powerpc/crypto: SHA512 hash routines for nx encryption
  powerpc/crypto: SHA256 hash routines for nx encryption
  powerpc/crypto: AES-XCBC mode routines for nx encryption
  powerpc/crypto: AES-GCM mode routines for nx encryption
  powerpc/crypto: AES-ECB mode routines for nx encryption
  powerpc/crypto: AES-CTR mode routines for nx encryption
  powerpc/crypto: AES-CCM mode routines for nx encryption
  powerpc/crypto: AES-CBC mode routines for nx encryption
  powerpc/crypto: nx driver code supporting nx encryption
  powerpc/pseries: Enable the PFO-based RNG accelerator
  powerpc/pseries/hwrng: PFO-based hwrng driver
  powerpc/pseries: Add PFO support to the VIO bus
  powerpc/pseries: Add pseries update notifier for OFDT prop changes
  powerpc/pseries: Add new hvcall constants to support PFO
  ...
2012-05-23 09:02:42 -07:00
Anton Blanchard 694caf0255 powerpc: Remove CONFIG_POWER4_ONLY
Remove CONFIG_POWER4_ONLY, the option is badly named and only does two
things:

- It wraps the MMU segment table code. With feature fixups there is
  little downside to compiling this in.

- It uses the newer mtocrf instruction in various assembly functions.
  Instead of making this a compile option just do it at runtime via
  a feature fixup.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-30 15:37:26 +10:00
Robert Richter 392d65a9ad perf: Remove PERF_COUNTERS config option
Renaming remaining PERF_COUNTERS options into PERF_EVENTS.

Think we can get rid of PERF_COUNTERS now.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333643084-26776-5-git-send-email-robert.richter@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-04-26 13:52:52 +02:00
Geoff Levand 3252c8a3d0 powerpc/ps3: Refresh ps3_defconfig
Signed-off-by: Geoff Levand <geoff@infradead.org>
2012-04-24 18:18:01 -07:00
Mark Brown 1eecb8280b Linux 3.4-rc2
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJPgOpXAAoJEHm+PkMAQRiG8eUIAJ3Hjo0o5hqzxol8LWHDGF8s
 3h59qwRtts82u2psStZULPLbBzw6yjn8U5Mcrh7pffwCG2BzBL5rXcmXfvoPaET3
 TjylIj986Jv+jwZyuyZcLzYyoUtgjtq7hnt4tgVVEPlexYs7LxUl8vO8QjxT+bVO
 7eKgzLsXlBC9kw4P5M7kOBQ9NE5vmEcKf+fB3Hu3DqfVJtw9Lb7EeDQj/cbQsGqI
 vavSxe7lMTPsgMP2+hRz4txGTDJNRazkO2BdwfYrcNwTSa8tfBFlamww3y4+eJtq
 MFQfdNxQpumh2++T4IC2i/nLaawH7kWj2EdaRCRLMy9hVlb/v8/wcgd+1nfLkU8=
 =0on9
 -----END PGP SIGNATURE-----

Merge tag 'v3.4-rc2' into for-3.5

Linux 3.4-rc2 contains some bug fixes we need, including the addition of
an export for regcache_sync_region().
2012-04-09 11:53:45 +01:00
Benjamin Herrenschmidt e31c6dfa8e Merge remote-tracking branch 'kumar/next' into merge 2012-04-02 13:57:46 +10:00