Commit Graph

178 Commits

Author SHA1 Message Date
Roland Dreier 972b29c8f8 target: Rename spc_get_write_same_sectors -> sbc_get_write_same_sectors
Trivial, but WRITE SAME is an SBC command so it seems strange for a
related function (defined in target_core_sbc.c) to be in the spc_
namespace.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-23 12:46:14 -08:00
Roland Dreier bb992e72f9 target: Fix error checking for UNMAP commands
SBC-3 (revision 35) says:

    The PARAMETER LIST LENGTH field specifies the length in bytes of the
    UNMAP parameter list that is available to be transferred from the
    Data-Out Buffer. If the parameter list length is greater than zero
    and less than 0008h (i.e., eight), then the device server shall
    terminate the command with CHECK CONDITION status with the sense key
    set to ILLEGAL REQUEST and the additional sense code set to
    PARAMETER LIST LENGTH ERROR. A PARAMETER LIST LENGTH set to zero
    specifies that no data shall be sent.

so our sense code for too-short descriptors was wrong, and we were
incorrectly failing commands that didn't transfer any descriptors.

While we're at it, also handle the UNMAP check:

    If the ANCHOR bit is set to one, and the ANC_SUP bit in the Logical
    Block Provisioning VPD page (see 6.6.4) is set to zero, then the
    device server shall terminate the command with CHECK CONDITION
    status with the sense key set to ILLEGAL REQUEST and the additional
    sense code set to INVALID FIELD IN CDB.

(chris boot: Fix wrong cut+paste comment in transport_send_check_condition_and_sense)

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-13 12:16:05 -08:00
Tregaron Bayly adfa9570a5 target: Add device attribute to expose config_item_name for INQUIRY model
This patch changes LIO to use the configfs backend device name as the
model if you echo '1' to an individual device's emulate_model_alias attribute.
This is a valid operation only on devices with an export count of 0.

Signed-off-by: Tregaron Bayly <tbayly@bluehost.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-13 11:27:58 -08:00
Nicholas Bellinger d0c8b259f8 target/iblock: Use backend REQ_FLUSH hint for WriteCacheEnabled status
This patch allows IBLOCK to check block hints in request_queue->flush_flags
when reporting current backend device WriteCacheEnabled status to a remote
SCSI initiator port.

This is done via a se_subsystem_api->get_write_cache() call instead of a
backend se_device creation time flag, as we expect REQ_FLUSH bits to possibly
change from an underlying blk_queue_flush() by the SCSI disk driver, or
internal raw struct block_device driver usage.

Also go ahead and update iblock_execute_rw() bio I/O path code to use
REQ_FLUSH + REQ_FUA hints when determining WRITE_FUA usage, and make SPC
emulation code use a spc_check_dev_wce() helper to handle both types of
cases for virtual backend subsystem drivers.

(asias: Drop unnecessary comparsion operators)

Reported-by: majianpeng <majianpeng@gmail.com>
Cc: majianpeng <majianpeng@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-13 11:27:51 -08:00
Dan Carpenter 703d641d87 target: change sprintf to snprintf in transport_dump_vpd_ident
"buf" is 128 characters and "vpd->device_identifier" is 256.  It makes
the static checkers complain.

Also bump VPD_TMP_BUF_SIZE to match INQUIRY_VPD_DEVICE_IDENTIFIER_LEN.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-13 11:27:31 -08:00
Roland Dreier d09816ae8f target: Remove never-used TMR_FABRIC_TMR enum value
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-13 11:27:22 -08:00
Hannes Reinecke 0dfa1c5da3 target: Export SPC inquiry emulation
Some target drivers might need to access the inquiry data
directly, without sending out the actual command.
So export these functions.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Nicholas Bellinger <nab@risingtidesystems.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-13 11:27:22 -08:00
Hannes Reinecke ba829137bf target: Introduce TCM_NO_SENSE
Introduce TCM_NO_SENSE, mapping to sense code
'Not ready, no additional sense information'.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Nicholas Bellinger <nab@risingtidesystems.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-01-10 20:06:08 -08:00
Andy Grover 79e62fc382 target/iscsi_target: Add NodeACL tags for initiator group support
Thanks for reviews, looking a lot better.

---- 8< ----

Initiator access config could be easier. The way other storage vendors
have addressed this is to support initiator groups: the admin adds
initiator WWNs to the group, and then LUN permissions can be granted for
the entire group at once.

Instead of changing ktarget's configfs interface, this patch keeps
the configfs interface per-initiator-wwn and just adds a 'tag' field
for each. This should be enough for user tools like targetcli to group
initiator ACLs and sync their configurations.

acl_tag is not used internally, but needs to be kept in configfs so that
all user tools can avoid dependencies on each other.

Code tested to work, although userspace pieces still to be implemented.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-12-13 14:18:09 -08:00
Nicholas Bellinger 0ff8754981 target: Add link_magic for fabric allow_link destination target_items
This patch adds [dev,lun]_link_magic value assignment + checks within generic
target_fabric_port_link() and target_fabric_mappedlun_link() code to ensure
destination config_item *target_item sent from configfs_symlink() ->
config_item_operations->allow_link() is the underlying se_device->dev_group
and se_lun->lun_group that we expect to symlink.

Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-12-05 00:11:36 -08:00
Nicholas Bellinger ffe0067544 target: Make spc_get_write_same_sectors return sector_t
We already expect TFO->get_blocks() to return sector_t for zero value case
when doing WRITE_SAME to the end of the backend device, so go ahead and return
sector_t from spc_get_write_same_sectors() to handle this case properly.

Also, update the single iblock_execute_write_same() caller of this code.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-27 22:49:25 -08:00
Nicholas Bellinger 773cbaf746 target: Add/check max_write_same_len device attribute + update block limits VPD
This patch adds a new max_write_same_len device attribute for use with
WRITE_SAME w/ UNMAP=0 backend emulation.  This can be useful for
lowering the default backend value (IBLOCK uses 0xFFFF).

Also, update block limits VPD emulation code in spc_emulate_evpd_b0() to
report MAXIMUM WRITE SAME LENGTH, and enforce max_write_same_len during
sbc_parse() -> sbc_setup_write_same() CDB sanity checking for all emulated
WRITE_SAME w/ UNMAP=0 cases.

(Robert: Move max_write_same_len check in sbc_setup_write_same() to
         check both WRITE_SAME w/ UNMAP=1 and w/ UNMAP=0 cases)

Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Robert Elliott <Elliott@hp.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-15 12:27:21 -08:00
Nicholas Bellinger cd063bef41 target/sbc: Seperate WRITE_SAME based on UNMAP flag in sbc_ops
This patch adds a new sbc_ops->execute_write_same_unmap() caller for use
with WRITE_SAME w/ UNMAP=1, and performs the ->execute_cmd() setup based
this bit within sbc_setup_write_same() code.

Also, makes the changes in sbc_parse_cdb() to handle a sense_reason_t
return from sbc_setup_write_same() on error.

Reported-by: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-15 12:04:52 -08:00
Christoph Hellwig de103c93af target: pass sense_reason as a return value
Pass the sense reason as an explicit return value from the I/O submission
path instead of storing it in struct se_cmd and using negative return
values.  This cleans up a lot of the code pathes, and with the sparse
annotations for the new sense_reason_t type allows for much better
error checking.

(nab: Convert spc_emulate_modesense + spc_emulate_modeselect to use
      sense_reason_t with Roland's MODE SELECT changes)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06 20:55:46 -08:00
Christoph Hellwig 48c2567d1a target: remove ->get_device_rev
Now that the reservations and ALUA code have been cleaned up there is no need
for the get_device_rev method, as we only need the standards revision in the
inquiry data, where we can hardcode it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06 20:55:45 -08:00
Christoph Hellwig c87fbd5656 target: simplify alua support
We always support ALUA for virtual backends, and never for physical ones.  Simplify
the code to just deal with these two cases and remove the superflous abstractions.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06 20:55:45 -08:00
Christoph Hellwig d977f4377f target: simplify reservations code
We do not support host-level reservations for the pscsi backend, and all
virtual backends are newere than SCSI-2, so just make the combined
SPC-3 + SCSI-2 support the only supported variant and kill the switches
for the different implementations, given that this code handles the no-op
version just fine.

(hch: Update DRF_SPC2_RESERVATIONS lock usage)

Signed-off-by: Christoph Hellwig <hch@lst.de>
2012-11-06 20:55:45 -08:00
Christoph Hellwig 019c4ca621 target: kill dev->dev_task_attr_type
We can just key off ordered tag emulation of the transport_type field.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06 20:55:45 -08:00
Christoph Hellwig 6f23ac8a39 target: provide generic sbc device type/revision helpers
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06 20:55:44 -08:00
Christoph Hellwig 8de530a523 target/pscsi: call spc_emulate_report_luns directly
No need to indirect through spc_parse_cdb if we only ever call it for
REPORT LUNS emulation.

(nab: Add missing EXPORT_SYMBOL for spc_emulate_report_luns)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06 20:55:44 -08:00
Christoph Hellwig 9e999a6c51 target: rename spc_ops
These really are sbc_ops, so name them correctly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06 20:55:44 -08:00
Christoph Hellwig 0fd97ccf45 target: kill struct se_subsystem_dev
Simplify the code a lot by killing the superflous struct se_subsystem_dev.
Instead se_device is allocated early on by the backend driver, which allocates
it as part of its own per-device structure, borrowing the scheme that is for
example used for inode allocation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06 20:55:43 -08:00
Nicholas Bellinger a026757ff5 target: Add target_submit_cmd_map_sgls for SGL fabric memory passthrough
This patch adds a new target_submit_cmd_map_sgls() to pass pre-allocated
SGL memory using transport_generic_map_mem_to_cmd() logic into the generic
target submit I/O codepath.

It also adds a target_submit_cmd() wrapper around target_submit_cmd_map_sgls()
for existing fabric code that already assumes internal target-core SGL memory
allocation.

(v2: Rename to target_submit_cmd_map_sgls + drop TARGET_SCF_MAP_MEM flag
     in favor of non zero sgl_count check)

Reported-by: Christoph Hellwig <hch@lst.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-02 14:16:08 -07:00
Nicholas Bellinger fd30e93102 target: Drop se_subsystem_api->[write_cache,fua_write]_emulated flags
This patch drops se_subsystem_api->[write_cache,fua_write]_emulated flags
set by viritual FILEIO/IBLOCK/RD_MCP backend drivers in favor of explict
TRANSPORT_PLUGIN_PHBA_PDEV checks to know when to fail if userspace is
attempting to set virtual emulation bits for an pSCSI (passthrough)
backend device.

Reported-by: Christoph Hellwig <hch@lst.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17 17:13:34 -07:00
Roland Dreier 9c58b7ddd7 target: Simplify fabric sense data length handling
Every fabric driver has to supply a se_tfo->set_fabric_sense_len()
method, just so iSCSI can return an offset of 2.  However, every fabric
driver is already allocating a sense buffer and passing it into the
target core, either via transport_init_se_cmd() or target_submit_cmd().

So instead of having iSCSI pass the start of its sense buffer into the
core and then later tell the core to skip the first 2 bytes, it seems
easier for iSCSI just to do the offset of 2 when it passes the sense
buffer into the core.  Then we can drop the se_tfo->set_fabric_sense_len()
everywhere, and just add a couple of lines of code to iSCSI to set the
sense data length to the beginning of the buffer right before it sends
it over the network.

(nab: Remove .set_fabric_sense_len usage from tcm_qla2xxx_npiv_ops +
      change transport_get_sense_buffer to follow v3.6-rc6 code w/o
      ->set_fabric_sense_len usage)

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17 17:12:58 -07:00
Roland Dreier 2ed772b7b9 target: Remove unused target_core_fabric_ops.get_fabric_sense_len method
There are no callers of se_tfo->get_fabric_sense_len(), so we should
stop having every fabric driver implement it.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17 16:15:47 -07:00
Paolo Bonzini 32a8811ff1 target: support zero allocation length in REQUEST SENSE
Similar to INQUIRY and MODE SENSE, construct the sense data in a
buffer and later copy it to the scatterlist.  Do not do anything,
but still clear a pending unit attention condition, if the allocation
length is zero.

However, SPC tells us that "If a REQUEST SENSE command is terminated with
CHECK CONDITION status [and] the REQUEST SENSE command was received on
an I_T nexus with a pending unit attention condition (i.e., before the
device server reports CHECK CONDITION status), then the device server
shall not clear the pending unit attention condition."  Do the
transport_kmap_data_sg early to detect this case.

It also tells us "Device servers shall not adjust the additional sense
length to reflect truncation if the allocation length is less than the
sense data available", so do not do that!  Note that the err variable
is write-only.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-07 11:14:21 -07:00
Paolo Bonzini d5829eac5f target: fix use-after-free with PSCSI sense data
The pointer to the sense buffer is fetched by transport_get_sense_data,
but this is called by target_complete_ok_work long after pscsi_req_done
has freed the struct that contains it.

Pass instead the fabric's sense buffer to transport_complete,
and copy the data to it directly in transport_complete.  Setting
SCF_TRANSPORT_TASK_SENSE also becomes a duty of transport_complete.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-05 17:20:28 -07:00
Roland Dreier af74115eed target: Remove unused se_cmd.cmd_spdtl
This was originally for helping fabrics to determine overflow/underflow
status, and has been superceeded by SCF_OVERFLOW_BIT + SCF_UNDERFLOW_BIT.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-08-21 14:27:35 -07:00
Roland Dreier d6dfc868bc target: Allow for target_submit_cmd() returning errors
We want it to be possible for target_submit_cmd() to return errors up
to its fabric module callers.  For now just update the prototype to
return an int, and update all callers to handle non-zero return values
as an error.

This is immediately useful for tcm_qla2xxx to fix a long-standing active
I/O session shutdown race, but tcm_fc, usb-gadget, and sbp-target the
fabric maintainers need to check + ACK that handling a target_submit_cmd()
failure due to session shutdown does not introduce regressions

(nab: Respin against for-next after initial NACK + update docbook comment +
      fix double se_cmd init in exception path for usb-gadget)

Cc: Chad Dupuis <chad.dupuis@qlogic.com>
Cc: Arun Easi <arun.easi@qlogic.com>
Cc: Chris Boot <bootc@bootc.net>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Mark Rustad <mark.d.rustad@intel.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-17 17:05:05 -07:00
Roland Dreier e2397c7044 target: Add generation of LOGICAL BLOCK ADDRESS OUT OF RANGE
Many SCSI commands are defined to return a CHECK CONDITION / ILLEGAL
REQUEST with ASC set to LOGICAL BLOCK ADDRESS OUT OF RANGE if the
initiator sends a command that accesses a too-big LBA.  Add an enum
value and case entries so that target code can return this status.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:35:35 -07:00
Roland Dreier 1c7b13fe65 target: Remove se_session.sess_wait_list
Since we set se_session.sess_tearing_down and stop new commands from
being added to se_session.sess_cmd_list before we wait for commands to
finish when freeing a session, there's no need for a separate
sess_wait_list -- if we let new commands be added to sess_cmd_list
after setting sess_tearing_down, that would be a bug that breaks the
logic of waiting in-flight commands.

Also rename target_splice_sess_cmd_list() to
target_sess_cmd_list_set_waiting(), since we are no longer splicing
onto a separate list.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:35:27 -07:00
Roland Dreier 669ab62c9d target: Un-export target_get_sess_cmd()
There are no in-tree users of target_get_sess_cmd() outside of
target_core_transport.c.  Any new code should use the higher-level
target_submit_cmd() interface.  So let's un-export target_get_sess_cmd()
and make it static to the one file where it's actually used.

(nab: Fix up minor fuzz to for-next)

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:35:25 -07:00
Christoph Hellwig af8772926f target: replace the processing thread with a TMR work queue
The last functionality of the target processing thread is offloading possibly
long running task management requests from the submitter context.  To keep
TMR semantics the same we need a single threaded ordered queue, which can
be provided by a per-device workqueue with the right flags.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:35:21 -07:00
Christoph Hellwig f314643751 target: remove transport_generic_handle_cdb_map
Remove this command submission path which is not used by any in-tree driver.
This also removes the now unused new_cmd_map fabtric method, which a few
drivers implemented despite never calling transport_generic_handle_cdb_map.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:35:21 -07:00
Christoph Hellwig 1389533ef9 target: remove transport_generic_handle_data
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:35:20 -07:00
Christoph Hellwig 70baf0ab3b target: remove transport_generic_process_write
Just call target_execute_cmd directly.  Also, convert loopback, sbp,
usb-gadget to use the newly exported target_execute_cmd().

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:35:16 -07:00
Christoph Hellwig 14150a6bbe target: move unmap to struct spc_ops
Having all the unmap payload parsing in the backed is a bit ugly, but until
more drivers support it and we can find a good interface for all of them
that seems the way to go.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:35:14 -07:00
Christoph Hellwig 6f974e8ce7 target: move write_same to struct spc_ops
Add spc_ops->execute_write_same() caller for ->execute_cmd() setup,
and update IBLOCK backends to use it.

(nab: add export of spc_get_write_same_sectors symbol)
(roland: Carry forward: Fix range calculation in WRITE SAME emulation
         when num blocks == 0)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:34:41 -07:00
Christoph Hellwig ad67f0d9e6 target: move sync_cache to struct spc_ops
Add spc_ops->execute_sync_cache() caller for ->execute_cmd() setup,
and update IBLOCK + FILEIO backends to use it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:29:12 -07:00
Christoph Hellwig 0c2ad7d113 target: add struct spc_ops + initial ->execute_rw pointer usage
Remove the execute_cmd method in struct se_subsystem_api, and always use the
one directly in struct se_cmd.  To make life simpler for SBC virtual backends
a struct spc_ops that is passed to sbc_parse_cmd is added.  For now it
only contains an execute_rw member, but more will follow with the subsequent
commits.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:29:12 -07:00
Christoph Hellwig e1306bdab3 target: remove dead SCF_ flags
Remove the dead SCF_SE_ALLOW_EOO and SCF_DELAYED_CMD_FROM_SAM_ATTR
from se_cmd_flags_table.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:29:12 -07:00
Christoph Hellwig 9f3eb93eaf target: move ref_cmd from the generic se_tmr_req into iscsi code
Also remove the unused ref_task_lun field in struct se_tmr_req.

(nab: Add missing TASK_REASSIGN ref_lun vs. ref_cmd orig_fe_lun checks
      in iscsit_tmr_task_reassign)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:29:11 -07:00
Christoph Hellwig 5f41a31d0a target: remove the execute list
Since "target: Drop se_device TCQ queue_depth usage from I/O path" we always
submit all commands (or back then, tasks) from __transport_execute_tasks.

That means the the execute list has lots its purpose, as we can simply
submit the commands that are restarted in transport_complete_task_attr
directly while we walk the list.  In fact doing so also solves a race
in the way it currently walks to delayed_cmd_list as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:29:11 -07:00
Christoph Hellwig 1fd032ee10 target: move code for CDB emulation
Move the existing code in target_core_cdb.c into the files for the command
sets that the emulations implement.

(roland + nab: Squash patch: Fix range calculation in WRITE SAME emulation
 when num blocks == 0s)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:27:45 -07:00
Christoph Hellwig d6e0175cf3 target: add a parse_cdb method to the backend drivers
Instead of trying to handle all SCSI command sets in one function
(transport_generic_cmd_sequencer) call out to the backend driver to perform
this functionality.  For pSCSI a copy of the existing code is used, but for
all virtual backends we can use a new parse_sbc_cdb helper is used to
provide a simple SBC emulation.

For now this setups means a fair amount of duplication between pSCSI and the
SBC library, but patches later in this series will sort out that problem.

(nab: Fix up build failure in target_core_pscsi.c)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:25:56 -07:00
Christoph Hellwig 64f1db38c6 target: remove control CDB flags
We don't need three flags to classifiy the CDB as we can check for a NULL S/G
list for a dataless command, and can infer from the absence of the data flag
that we deal with a control CDB.  Also remove the _SG_IO from the data CDB
flag as all I/O is dont on S/G lists now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:25:55 -07:00
Joern Engel 4149268e78 target: Add TFO->put_session() caller for HW fabric session shutdown
This patch adds an optional target_core_fabric_ops->put_session() caller
within the existing target_put_session() code path.

This is required by tcm_qla2xxx code in order to invoke it's own fabric
specific session shutdown handler using se_session->sess_kref.

Signed-off-by: Joern Engel <joern@logfs.org>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-06-12 19:33:05 -07:00
Nicholas Bellinger 5b9a4d7280 target: Add MI_REPORT_TARGET_PGS ext. header + implict_trans_secs attribute
This patch adds support for ALUA MI_REPORT_TARGET_PGS extended header
format defined within SPC-4.  It changes target core ALUA emulation logic
within target_emulate_report_target_port_groups() to support both the
extended and original length only header formats.

It includes adding a new 'implict_trans_secs' attribute for each ALUA
target port group to control the value returned to the application client
for an recommended implict translation timeout in seconds.  By default
this value is currently set to zero, and limited up to 255 by virtue of
using a single byte in the extended header format.

This value is used by target_emulate_report_target_port_groups() within
the extended header logic to set IMPLICIT TRANSITION TIME as defined by
spc4r30.

Cc: Hannes Reinecke <hare@suse.de>
Cc: Rob Evers <revers@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-17 00:45:58 -07:00
Jörn Engel 33933a0e96 target: make target_put_session void
No real change, it effectively already was.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-11 15:01:52 -07:00