Commit Graph

13 Commits

Author SHA1 Message Date
Christian Hemp 1b61feea3f ARM: dts: imx6: phyFLEX: Add CAN support
Add CAN support for Phytec phyFLEX-i.MX6 (PFL-A-02 and PBA-B-01).

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-23 15:08:15 +08:00
Christian Hemp 9924546b29 ARM: dts: imx6: phyFLEX: Add PCIe
Add PCIe support for Phytec phyFLEX-i.MX6 (PFL-A-02 and PBA-B-01).

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-23 15:08:15 +08:00
Christian Hemp c082fd422e ARM: dts: imx6: phyFLEX: Set correct interrupt for pmic
The PMIC interrupt was changed from modul revision 1 to 2. Revision 1 was
declared as a prototype and is not in series by any customers.

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-23 15:08:14 +08:00
Christian Hemp 0019d18213 ARM: dts: imx6: phyFLEX: Enable gpmi in module file
The nand is on the module (PFL-A-02) and not on the baseboard (PBA-B-01).

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-23 15:08:14 +08:00
Christian Hemp 350088320b ARM: dts: imx6: phyFLEX: set nodes in alphabetical order
The gmpi and fec node were not in alphabatical order.

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-23 15:08:14 +08:00
Dmitry Lavnikevich 8fa91c8e55 ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards
Audio on phyFLEX boards is presented by tlv320aic3007 codec connected
over SSI interface.

Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-23 15:08:11 +08:00
Dmitry Lavnikevich d76fab80ef ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02
Since pins and frequency are specific to module (pfla02), not base board
(pbab02), it is better to be initialized in corresponding dts file.

This patch fixes i2c2, i2c3 pin configuration which caused messages:

imx6q-pinctrl 20e0000.iomuxc: no groups defined in /soc/aips-bus@02000000/iomuxc@020e0000/i2c2grp
imx6q-pinctrl 20e0000.iomuxc: no groups defined in /soc/aips-bus@02000000/iomuxc@020e0000/i2c3grp
imx6q-pinctrl 20e0000.iomuxc: unable to find group for node i2c2grp
imx6q-pinctrl 20e0000.iomuxc: unable to find group for node i2c3grp

Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-23 15:08:11 +08:00
Steve Twiss bd597f47ca devicetree: Dialog Semiconductor consolidate existing vendor prefixes to standardise on 'dlg'
This patch series updates the device tree vendor prefix for
Dialog Semiconductor.

Various methods are currently used throughout the kernel: 'diasemi',
'dialog' and 'dlg'. Others have also been suggested.

This patch set aims to consolidate the usage of the vendor prefix to
use a common standard. The prefix 'dlg' is used.

Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-29 09:26:29 +01:00
Philipp Zabel 54a9a3af68 ARM: dts: pfla02: Add ethernet phy supply regulator
The 2.5V VDD_ETH_IO voltage supplied by the DA9063 LDO4 is used
to power the KSZ9031 PHY DVDDH input and to pull the necessary
pins (including bootstrap pins) high.
It also powers the i.MX6 NVCC_RGMII and NVCC_ENET inputs.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18 16:49:33 +08:00
Philipp Zabel 14e2833da3 ARM: dts: pfla02: Add UART1 (uart3)
The pins labeled UART1 on the module connector are wired to i.MX6 uart3.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16 23:01:55 +08:00
Philipp Zabel 26888190cb ARM: dts: pfla02: PHY reset is active-low
Note that the fec driver code currently hard-codes an active-low
reset, regardless of the flags in the device tree.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16 23:01:54 +08:00
Philipp Zabel 94a1bbf85a ARM: dts: pfla02: Add GPIO LEDs
This patch enables the red and green GPIO LEDs on Phytec phyFLEX i.MX6 modules.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16 23:01:53 +08:00
Philipp Zabel 4fe69a934b ARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16 23:01:52 +08:00