Commit Graph

571 Commits

Author SHA1 Message Date
Dan Carpenter 6bf15191f6 tipc: potential divide by zero in tipc_link_recv_fragment()
The worry here is that fragm_sz could be zero since it comes from
skb->data.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-06 16:16:52 -04:00
Dan Carpenter cb4b102f0a tipc: add a bounds check in link_recv_changeover_msg()
The bearer_id here comes from skb->data and it can be a number from 0 to
7.  The problem is that the ->links[] array has only 2 elements so I
have added a range check.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-06 16:16:52 -04:00
Gerlando Falauto 488fc9af82 tipc: pskb_copy() buffers when sending on more than one bearer
When sending packets, TIPC bearers use skb_clone() before writing their
hardware header. This will however NOT copy the data buffer.
So when the same packet is sent over multiple bearers (to reach multiple
nodes), the same socket buffer data will be treated by multiple
tipc_media drivers which will write their own hardware header through
dev_hard_header().
Most of the time this is not a problem, because by the time the
packet is processed by the second media, it has already been sent over
the first one. However, when the first transmission is delayed (e.g.
because of insufficient bandwidth or through a shaper), the next bearer
will overwrite the hardware header, resulting in the packet being sent:
a) with the wrong source address, when bearers of the same type,
e.g. ethernet, are involved
b) with a completely corrupt header, or even dropped, when bearers of
different types are involved.

So when the same socket buffer is to be sent multiple times, send a
pskb_copy() instead (from the second instance on), and release it
afterwards (the bearer will skb_clone() it anyway).

Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-03 16:08:58 -04:00
Gerlando Falauto 77861d9c00 tipc: tipc_bcbearer_send(): simplify bearer selection
Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-03 16:08:58 -04:00
Gerlando Falauto e616071094 tipc: cosmetic: clean up comments and break a long line
Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-03 16:08:58 -04:00
Patrick McHardy a29a194a15 tipc: add InfiniBand media type
Add InfiniBand media type based on the ethernet media type.

The only real difference is that in case of InfiniBand, we need the entire
20 bytes of space reserved for media addresses, so the TIPC media type ID is
not explicitly stored in the packet payload.

Sample output of tipc-config:

# tipc-config -v -addr -netid -nt=all -p -m -b -n -ls

node address: <10.1.4>
current network id: 4711
Type       Lower      Upper      Port Identity              Publication Scope
0          167776257  167776257  <10.1.1:1855512577>        1855512578  cluster
           167776260  167776260  <10.1.4:1216454657>        1216454658  zone
1          1          1          <10.1.4:1216479235>        1216479236  node
Ports:
1216479235: bound to {1,1}
1216454657: bound to {0,167776260}
Media:
eth
ib
Bearers:
ib:ib0
Nodes known:
<10.1.1>: up
Link <broadcast-link>
  Window:20 packets
  RX packets:0 fragments:0/0 bundles:0/0
  TX packets:0 fragments:0/0 bundles:0/0
  RX naks:0 defs:0 dups:0
  TX naks:0 acks:0 dups:0
  Congestion bearer:0 link:0  Send queue max:0 avg:0

Link <10.1.4:ib0-10.1.1:ib0>
  ACTIVE  MTU:2044  Priority:10  Tolerance:1500 ms  Window:50 packets
  RX packets:80 fragments:0/0 bundles:0/0
  TX packets:40 fragments:0/0 bundles:0/0
  TX profile sample:22 packets  average:54 octets
  0-64:100% -256:0% -1024:0% -4096:0% -16384:0% -32768:0% -66000:0%
  RX states:410 probes:213 naks:0 defs:0 dups:0
  TX states:410 probes:197 naks:0 acks:0 dups:0
  Congestion bearer:0 link:0  Send queue max:1 avg:0

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-17 14:18:33 -04:00
Patrick McHardy 76f5c6f359 tipc: set skb->protocol in eth_media packet transmission
The skb->protocol field is used by packet classifiers and for AF_PACKET
cooked format, TIPC needs to set it properly.

Fixes packet classification and ethertype of 0x0000 in cooked captures:

Out 20:c9:d0:43:12:d9 ethertype Unknown (0x0000), length 56:
	0x0000:  5b50 0028 0000 30d4 0100 1000 0100 1001  [P.(..0.........
	0x0010:  0000 03e8 0000 0001 20c9 d043 12d9 0000  ...........C....
	0x0020:  0000 0000 0000 0000                      ........

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-17 14:18:33 -04:00
Patrick McHardy 8aeb89f214 tipc: move bcast_addr from struct tipc_media to struct tipc_bearer
Some network protocols, like InfiniBand, don't have a fixed broadcast
address but one that depends on the configuration. Move the bcast_addr
to struct tipc_bearer and initialize it with the broadcast address of
the network device when the bearer is enabled.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-17 14:18:33 -04:00
Patrick McHardy ccc4ba2ea2 tipc: remove unused str2addr media callback
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-17 14:18:33 -04:00
David S. Miller d978a6361a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/nfc/microread/mei.c
	net/netfilter/nfnetlink_queue_core.c

Pull in 'net' to get Eric Biederman's AF_UNIX fix, upon which
some cleanups are going to go on-top.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-07 18:37:01 -04:00
Mathias Krause 60085c3d00 tipc: fix info leaks via msg_name in recv_msg/recv_stream
The code in set_orig_addr() does not initialize all of the members of
struct sockaddr_tipc when filling the sockaddr info -- namely the union
is only partly filled. This will make recv_msg() and recv_stream() --
the only users of this function -- leak kernel stack memory as the
msg_name member is a local variable in net/socket.c.

Additionally to that both recv_msg() and recv_stream() fail to update
the msg_namelen member to 0 while otherwise returning with 0, i.e.
"success". This is the case for, e.g., non-blocking sockets. This will
lead to a 128 byte kernel stack leak in net/socket.c.

Fix the first issue by initializing the memory of the union with
memset(0). Fix the second one by setting msg_namelen to 0 early as it
will be updated later if we're going to fill the msg_name member.

Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-07 16:28:02 -04:00
Hong zhi guo 573ce260b3 net-next: replace obsolete NLMSG_* with type safe nlmsg_*
Signed-off-by: Hong Zhiguo <honkiko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-28 14:25:25 -04:00
Sasha Levin b67bfe0d42 hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Linus Torvalds 06991c28f3 Driver core patches for 3.9-rc1
Here is the big driver core merge for 3.9-rc1
 
 There are two major series here, both of which touch lots of drivers all
 over the kernel, and will cause you some merge conflicts:
   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.
   - remove CONFIG_EXPERIMENTAL
 
 If you need me to provide a merged tree to handle these resolutions,
 please let me know.
 
 Other than those patches, there's not much here, some minor fixes and
 updates.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlEmV0cACgkQMUfUDdst+yncCQCfbmnQZju7kzWXk6PjdFuKspT9
 weAAoMCzcAtEzzc4LXuUxxG/sXBVBCjW
 =yWAQ
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches from Greg Kroah-Hartman:
 "Here is the big driver core merge for 3.9-rc1

  There are two major series here, both of which touch lots of drivers
  all over the kernel, and will cause you some merge conflicts:

   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.

   - remove CONFIG_EXPERIMENTAL

  Other than those patches, there's not much here, some minor fixes and
  updates"

Fix up trivial conflicts

* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
  base: memory: fix soft/hard_offline_page permissions
  drivercore: Fix ordering between deferred_probe and exiting initcalls
  backlight: fix class_find_device() arguments
  TTY: mark tty_get_device call with the proper const values
  driver-core: constify data for class_find_device()
  firmware: Ignore abort check when no user-helper is used
  firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
  firmware: Make user-mode helper optional
  firmware: Refactoring for splitting user-mode helper code
  Driver core: treat unregistered bus_types as having no devices
  watchdog: Convert to devm_ioremap_resource()
  thermal: Convert to devm_ioremap_resource()
  spi: Convert to devm_ioremap_resource()
  power: Convert to devm_ioremap_resource()
  mtd: Convert to devm_ioremap_resource()
  mmc: Convert to devm_ioremap_resource()
  mfd: Convert to devm_ioremap_resource()
  media: Convert to devm_ioremap_resource()
  iommu: Convert to devm_ioremap_resource()
  drm: Convert to devm_ioremap_resource()
  ...
2013-02-21 12:05:51 -08:00
David S. Miller 6338a53a2b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net into net
Pull in 'net' to take in the bug fixes that didn't make it into
3.8-final.

Also, deal with the semantic conflict of the change made to
net/ipv6/xfrm6_policy.c   A missing rt6->n neighbour release
was added to 'net', but in 'net-next' we no longer cache the
neighbour entries in the ipv6 routes so that change is not
appropriate there.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18 23:34:21 -05:00
Ying Xue 97f8b87e91 tipc: remove redundant checking for the number of iovecs in a send request
As the number of iovecs in a send request is already limited within
UIO_MAXIOV(i.e. 1024) in __sys_sendmsg(), it's unnecessary to check it
again in TIPC stack.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-02-15 17:03:32 -05:00
Ying Xue aba79f332f tipc: byte-based overload control on socket receive queue
Change overload control to be purely byte-based, using
sk->sk_rmem_alloc as byte counter, and compare it to a calculated
upper limit for the socket receive queue.

For all connection messages, irrespective of message importance,
the overload limit is set to a constant value (i.e, 67MB). This
limit should normally never be reached because of the lower
limit used by the flow control algorithm, and is there only
as a last resort in case a faulty peer doesn't respect the send
window limit.

For datagram messages, message importance is taken into account
when calculating the overload limit. The calculation is based
on sk->sk_rcvbuf, and is hence configurable via the socket option
SO_RCVBUF.

Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-02-15 17:01:58 -05:00
Ying Xue 57467e5629 tipc: eliminate duplicated discard_rx_queue routine
The tipc function discard_rx_queue() is just a duplicated
implementation of __skb_queue_purge().  Remove the former
and directly invoke __skb_queue_purge().

In doing so, the underscores convey to the code reader, more
information about the current locking state that is assumed.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-02-15 16:10:13 -05:00
Erik Hugne c5c73dca59 tipc: fix missing spinlock init in broadcast code
After commit 3c294cb3 "tipc: remove the bearer congestion mechanism",
we try to grab the broadcast bearer lock when sending multicast
messages over the broadcast link. This will cause an oops because
the lock is never initialized. This is an old bug, but the lock
was never actually used before commit 3c294cb3, so that why it was
not visible until now.  The oops will look something like:

	BUG: spinlock bad magic on CPU#2, daemon/147
	lock: bcast_bearer+0x48/0xffffffffffffd19a [tipc],
	.magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
	Pid: 147, comm: daemon Not tainted 3.8.0-rc3+ #206
	Call Trace:
	spin_dump+0x8a/0x8f
	spin_bug+0x21/0x26
	do_raw_spin_lock+0x114/0x150
	_raw_spin_lock_bh+0x19/0x20
	tipc_bearer_blocked+0x1f/0x40 [tipc]
	tipc_link_send_buf+0x82/0x280 [tipc]
	? __alloc_skb+0x9f/0x2b0
	tipc_bclink_send_msg+0x77/0xa0 [tipc]
	tipc_multicast+0x11b/0x1b0 [tipc]
	send_msg+0x225/0x530 [tipc]
	sock_sendmsg+0xca/0xe0

The above can be triggered by running the multicast demo program.

Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-15 15:40:56 -05:00
Kees Cook f887cc48c6 net/tipc: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

CC: Jon Maloy <jon.maloy@ericsson.com>
CC: Allan Stephens <allan.stephens@windriver.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David S. Miller <davem@davemloft.net>
2013-01-11 11:40:02 -08:00
Paul Gortmaker 0fef8f205f tipc: refactor accept() code for improved readability
In TIPC's accept() routine, there is a large block of code relating
to initialization of a new socket, all within an if condition checking
if the allocation succeeded.

Here, we simply flip the check of the if, so that the main execution
path stays at the same indentation level, which improves readability.
If the allocation fails, we jump to an already existing exit label.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-12-07 17:23:24 -05:00
Ying Xue 258f8667a2 tipc: add lock nesting notation to quiet lockdep warning
TIPC accept() call grabs the socket lock on a newly allocated
socket while holding the socket lock on an old socket. But lockdep
worries that this might be a recursive lock attempt:

  [ INFO: possible recursive locking detected ]
  ---------------------------------------------
  kworker/u:0/6 is trying to acquire lock:
  (sk_lock-AF_TIPC){+.+.+.}, at: [<c8c1226c>] accept+0x15c/0x310 [tipc]

  but task is already holding lock:
  (sk_lock-AF_TIPC){+.+.+.}, at: [<c8c12138>] accept+0x28/0x310 [tipc]

  other info that might help us debug this:
  Possible unsafe locking scenario:

          CPU0
          ----
          lock(sk_lock-AF_TIPC);
          lock(sk_lock-AF_TIPC);

          *** DEADLOCK ***

  May be due to missing lock nesting notation
  [...]

Tell lockdep that this locking is safe by using lock_sock_nested().
This is similar to what was done in commit 5131a184a3 for
SCTP code ("SCTP: lock_sock_nested in sctp_sock_migrate").

Also note that this is isn't something that is seen normally,
as it was uncovered with some experimental work-in-progress
code not yet ready for mainline.  So no need for stable
backports or similar of this commit.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-12-07 17:23:23 -05:00
Ying Xue cbab368790 tipc: eliminate connection setup for implied connect in recv_msg()
As connection setup is now completed asynchronously in BH context,
in the function filter_connect(), the corresponding code in recv_msg()
becomes redundant.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-12-07 17:23:22 -05:00
Ying Xue 584d24b396 tipc: introduce non-blocking socket connect
TIPC has so far only supported blocking connect(), meaning that a call
to connect() doesn't return until either the connection is fully
established, or an error occurs. This has proved insufficient for many
users, so we now introduce non-blocking connect(), analogous to how
this is done in TCP and other protocols.

With this feature, if a connection cannot be established instantly,
connect() will return the error code "-EINPROGRESS".
If the user later calls connect() again, he will either have the
return code "-EALREADY" or "-EISCONN", depending on whether the
connection has been established or not.

The user must have explicitly set the socket to be non-blocking
(SOCK_NONBLOCK or O_NONBLOCK, depending on method used), so unless
for some reason they had set this already (the socket would anyway
remain blocking in current TIPC) this change should be completely
backwards compatible.

It is also now possible to call select() or poll() to wait for the
completion of a connection.

An effect of the above is that the actual completion of a connection
may now be performed asynchronously, independent of the calls from
user space. Therefore, we now execute this code in BH context, in
the function filter_rcv(), which is executed upon reception of
messages in the socket.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
[PG: minor refactoring for improved connect/disconnect function names]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-12-07 17:23:21 -05:00
Ying Xue 7e6c131e15 tipc: consolidate connection-oriented message reception in one function
Handling of connection-related message reception is currently scattered
around at different places in the code. This makes it harder to verify
that things are handled correctly in all possible scenarios.
So we consolidate the existing processing of connection-oriented
message reception in a single routine.  In the process, we convert the
chain of if/else into a switch/case for improved readability.

A cast on the socket_state in the switch is needed to avoid compile
warnings on 32 bit, like "net/tipc/socket.c:1252:2: warning: case value
‘4294967295’ not in enumerated type".  This happens because existing
tipc code pseudo extends the default linux socket state values with:

	#define SS_LISTENING    -1      /* socket is listening */
	#define SS_READY        -2      /* socket is connectionless */

It may make sense to add these as _positive_ values to the existing
socket state enum list someday, vs. these already existing defines.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
[PG: add cast to fix warning; remove returns from middle of switch]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-12-07 17:23:20 -05:00
Paul Gortmaker bc879117d4 tipc: standardize across connect/disconnect function naming
Currently we have tipc_disconnect and tipc_disconnect_port.  It is
not clear from the names alone, what they do or how they differ.
It turns out that tipc_disconnect just deals with the port locking
and then calls tipc_disconnect_port which does all the work.

If we rename as follows: tipc_disconnect_port --> __tipc_disconnect
then we will be following typical linux convention, where:

   __tipc_disconnect: "raw" function that does all the work.

   tipc_disconnect: wrapper that deals with locking and then calls
		    the real core __tipc_disconnect function

With this, the difference is immediately evident, and locking
violations are more apt to be spotted by chance while working on,
or even just while reading the code.

On the connect side of things, we currently only have the single
"tipc_connect2port" function.  It does both the locking at enter/exit,
and the core of the work.  Pending changes will make it desireable to
have the connect be a two part locking wrapper + worker function,
just like the disconnect is already.

Here, we make the connect look just like the updated disconnect case,
for the above reason, and for consistency.  In the process, we also
get rid of the "2port" suffix that was on the original name, since
it adds no descriptive value.

On close examination, one might notice that the above connect
changes implicitly move the call to tipc_link_get_max_pkt() to be
within the scope of tipc_port_lock() protected region; when it was
not previously.  We don't see any issues with this, and it is in
keeping with __tipc_connect doing the work and tipc_connect just
handling the locking.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-12-07 17:23:19 -05:00
Jon Maloy e643df156a tipc: change sk_receive_queue upper limit
The sk_recv_queue upper limit for connectionless sockets has empirically
turned out to be too low. When we double the current limit we get much
fewer rejected messages and no noticable negative side-effects.

Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-12-07 17:23:18 -05:00
Ying Xue 9da3d47587 tipc: eliminate aggregate sk_receive_queue limit
As a complement to the per-socket sk_recv_queue limit, TIPC keeps a
global atomic counter for the sum of sk_recv_queue sizes across all
tipc sockets. When incremented, the counter is compared to an upper
threshold value, and if this is reached, the message is rejected
with error code TIPC_OVERLOAD.

This check was originally meant to protect the node against
buffer exhaustion and general CPU overload. However, all experience
indicates that the feature not only is redundant on Linux, but even
harmful. Users run into the limit very often, causing disturbances
for their applications, while removing it seems to have no negative
effects at all. We have also seen that overall performance is
boosted significantly when this bottleneck is removed.

Furthermore, we don't see any other network protocols maintaining
such a mechanism, something strengthening our conviction that this
control can be eliminated.

As a result, the atomic variable tipc_queue_size is now unused
and so it can be deleted.  There is a getsockopt call that used
to allow reading it; we retain that but just return zero for
maximum compatibility.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
[PG: phase out tipc_queue_size as pointed out by Neil Horman]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-12-07 14:19:52 -05:00
Erik Hugne c008413850 tipc: remove obsolete flush of stale reassembly buffer
Each link instance has a periodic job checking if there is a stale
ongoing message reassembly associated to the link. If no new
fragment has been received during the last 4*[link_tolerance] period,
it is assumed the missing fragment will never arrive. As a consequence,
the reassembly buffer is discarded, and a gap in the message sequence
occurs.

This assumption is wrong. After we abandoned our ambition to develop
packet routing for multi-cluster networks, only single-hop packet
transfer remains as an option. For those, all packets are guaranteed
to be delivered in sequence to the defragmentation layer. Any failure
to achieve sequenced delivery will eventually lead to link reset, and
the reassembly buffer will be flushed anyway.

So we just remove this periodic check, which is now obsolete.

Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
[PG: also delete get/inc_timer count, since they are now unused]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-12-06 17:20:19 -05:00
Paul Gortmaker 94fc9c4719 tipc: delete TIPC_ADVANCED Kconfig variable
There used to be a time when TIPC had lots of Kconfig knobs the
end user could alter, but they have all been made automatic or
obsolete, with the exception of CONFIG_TIPC_PORTS.  This
previously existing set of options was all hidden under the
TIPC_ADVANCED setting, which does not exist in any code, but
only in Kconfig scope.

Having this now, just to hide the one remaining "advanced"
option no longer makes sense.  Remove it.  Also get rid of the
ifdeffery in the TIPC code that allowed for TIPC_PORTS to be
possibly undefined.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-22 14:33:29 -05:00
Ying Xue 4cb7d55ab4 tipc: eliminate an unnecessary cast of node variable
As the variable:node is currently defined to u32 type, it is
unnecessary to cast its type to u32 again when using it.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-22 14:33:28 -05:00
Jon Maloy c64f7a6a1f tipc: introduce message to synchronize broadcast link
Upon establishing a first link between two nodes, there is
currently a risk that the two endpoints will disagree on exactly
which sequence number reception and acknowleding of broadcast
packets should start.

The following scenarios may happen:

1: Node A sends an ACTIVATE message to B, telling it to start acking
   packets from sequence number N.
2: Node A sends out broadcast N, but does not expect an acknowledge
   from B, since B is not yet in its broadcast receiver's list.
3: Node A receives ACK for N from all nodes except B, and releases
   packet N.
4: Node B receives the ACTIVATE, activates its link endpoint, and
   stores the value N as sequence number of first expected packet.
5: Node B sends a NAME_DISTR message to A.
6: Node A receives the NAME_DISTR message, and activates its endpoint.
   At this moment B is added to A's broadcast receiver's set.
   Node A also sets sequence number 0 as the first broadcast packet
   to be received from B.
7: Node A sends broadcast N+1.
8: B receives N+1, determines there is a gap in the sequence, since
   it is expecting N, and sends a NACK for N back to A.
9: Node A has already released N, so no retransmission is possible.
   The broadcast link in direction A->B is stale.

In addition to, or instead of, 7-9 above, the following may happen:

10: Node B sends broadcast M > 0 to A.
11: Node A receives M, falsely decides there must be a gap, since
    it is expecting packet 0, and asks for retransmission of packets
    [0,M-1].
12: Node B has already released these packets, so the broadcast
    link is stale in direction B->A.

We solve this problem by introducing a new unicast message type,
BCAST_PROTOCOL/STATE, to convey the sequence number of the next
sent broadcast packet to the other endpoint, at exactly the moment
that endpoint is added to the own node's broadcast receivers list,
and before any other unicast messages are permitted to be sent.

Furthermore, we don't allow any node to start receiving and
processing broadcast packets until this new synchronization
message has been received.

To maintain backwards compatibility, we still open up for
broadcast reception if we receive a NAME_DISTR message without
any preceding broadcast sync message. In this case, we must
assume that the other end has an older code version, and will
never send out the new synchronization message. Hence, for mixed
old and new nodes, the issue arising in 7-12 of the above may
happen with the same probability as before.

Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-22 14:33:21 -05:00
Ying Xue 389dd9bcf6 tipc: rename supported flag to recv_permitted
Rename the "supported" flag in bclink structure to "recv_permitted"
to better reflect what it is used for. When this flag is set for a
given node, we are permitted to receive and acknowledge broadcast
messages from that node.  Convert it to a bool at the same time,
since it is not used to store any numerical values.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-22 07:50:51 -05:00
Ying Xue 818f4da526 tipc: remove supportable flag from bclink structure
The "supportable" flag in bclink structure is a compatibility flag
indicating whether a peer node is capable of receiving TIPC broadcast
messages. However, all TIPC versions since tipc-1.5, and after the
inclusion in the upstream Linux kernel in 2006, support this capability.
It is highly unlikely that anybody is still using such an old
version of TIPC, let alone that they want to mix it with TIPC-2.0
nodes. Therefore, we now remove the "supportable" flag.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-22 07:50:50 -05:00
Ying Xue 3c294cb374 tipc: remove the bearer congestion mechanism
Currently at the TIPC bearer layer there is the following congestion
mechanism:

Once sending packets has failed via that bearer, the bearer will be
flagged as being in congested state at once. During bearer congestion,
all packets arriving at link will be queued on the link's outgoing
buffer.  When we detect that the state of bearer congestion has
relaxed (e.g. some packets are received from the bearer) we will try
our best to push all packets in the link's outgoing buffer until the
buffer is empty, or until the bearer is congested again.

However, in fact the TIPC bearer never receives any feedback from the
device layer whether a send was successful or not, so it must always
assume it was successful. Therefore, the bearer congestion mechanism
as it exists currently is of no value.

But the bearer blocking state is still useful for us. For example,
when the physical media goes down/up, we need to change the state of
the links bound to the bearer.  So the code maintaing the state
information is not removed.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-21 20:07:25 -05:00
Ying Xue 7503115107 tipc: wake up all waiting threads at socket shutdown
When a socket is shut down, we should wake up all thread sleeping on
it, instead of just one of them. Otherwise, when several threads are
polling the same socket, and one of them does shutdown(), the
remaining threads may end up sleeping forever.

Also, to align socket usage with common practice in other stacks, we
use one of the common socket callback handlers, sk_state_change(),
to wake up pending users. This is similar to the usage in e.g.
inet_shutdown(). [net/ipv4/af_inet.c].

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-21 20:06:29 -05:00
Erik Hugne c4fc298ab4 tipc: return POLLOUT for sockets in an unconnected state
If an implied connect is attempted on a nonblocking STREAM/SEQPACKET
socket during link congestion, the connect message will be discarded
and sendmsg will return EAGAIN. This is normal behavior, and the
application is expected to poll the socket until POLLOUT is set,
after which the connection attempt can be retried.
However, the POLLOUT flag is never set for unconnected sockets and
poll() always returns a zero mask. The application is then left without
a trigger for when it can make another attempt at sending the message.

The solution is to check if we're polling on an unconnected socket
and set the POLLOUT flag if the TIPC port owned by this socket
is not congested. The TIPC ports waiting on a specific link will be
marked as 'not congested' when the link congestion have abated.

Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-21 14:54:32 -05:00
Ying Xue f288bef464 tipc: fix race/inefficiencies in poll/wait behaviour
When an application blocks at poll/select on a TIPC socket
while requesting a specific event mask, both the filter_rcv() and
wakeupdispatch() case will wake it up unconditionally whenever
the state changes (i.e an incoming message arrives, or congestion
has subsided).  No mask is used.

To avoid this, we populate sk->sk_data_ready and sk->sk_write_space
with tipc_data_ready and tipc_write_space respectively, which makes
tipc more in alignment with the rest of the networking code.  These
pass the exact set of possible events to the waker in fs/select.c
hence avoiding waking up blocked processes unnecessarily.

In doing so, we uncover another issue -- that there needs to be a
memory barrier in these poll/receive callbacks, otherwise we are
subject to the the same race as documented above wq_has_sleeper()
[in commit a57de0b4 "net: adding memory barrier to the poll and
receive callbacks"].  So we need to replace poll_wait() with
sock_poll_wait() and use rcu protection for the sk->sk_wq pointer
in these two new functions.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-21 14:54:31 -05:00
Xiaotian Feng d145f7ec23 tipc: do not use tasklet_disable before tasklet_kill
If tasklet_disable() is called before related tasklet handled,
tasklet_kill will never be finished. tasklet_kill is enough.

Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Allan Stephens <allan.stephens@windriver.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: tipc-discussion@lists.sourceforge.net
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03 15:10:14 -04:00
Erik Hugne e57edf6b6d tipc: prevent dropped connections due to rcvbuf overflow
When large buffers are sent over connected TIPC sockets, it
is likely that the sk_backlog will be filled up on the
receiver side, but the TIPC flow control mechanism is happily
unaware of this since that is based on message count.

The sender will receive a TIPC_ERR_OVERLOAD message when this occurs
and drop it's side of the connection, leaving it stale on
the receiver end.

By increasing the sk_rcvbuf to a 'worst case' value, we avoid the
overload caused by a full backlog queue and the flow control
will work properly.

This worst case value is the max TIPC message size times
the flow control window, multiplied by two because a sender
will transmit up to double the window size before a port is marked
congested.
We multiply this by 2 to account for the sk_buff and other overheads.

Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-04 15:53:48 -04:00
Peter Senna Tschudin adccff34de net/tipc/name_table.c: Remove unecessary semicolon
Found by http://coccinelle.lip6.fr/

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-18 16:08:19 -04:00
Eric W. Biederman 15e473046c netlink: Rename pid to portid to avoid confusion
It is a frequent mistake to confuse the netlink port identifier with a
process identifier.  Try to reduce this confusion by renaming fields
that hold port identifiers portid instead of pid.

I have carefully avoided changing the structures exported to
userspace to avoid changing the userspace API.

I have successfully built an allyesconfig kernel with this change.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-10 15:30:41 -04:00
Ying Xue e6a04b1d3f tipc: eliminate configuration for maximum number of name publications
Gets rid of the need for users to specify the maximum number of
name publications supported by TIPC. TIPC now automatically provides
support for the maximum number of name publications to 65535.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20 02:26:31 -07:00
Ying Xue 34f256cc79 tipc: eliminate configuration for maximum number of name subscriptions
Gets rid of the need for users to specify the maximum number of
name subscriptions supported by TIPC. TIPC now automatically provides
support for the maximum number of name subscriptions to 65535.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20 02:26:31 -07:00
Ying Xue 61cdd4d80b tipc: add __read_mostly annotations to several global variables
Added to the following:

 - tipc_random
 - tipc_own_addr
 - tipc_max_ports
 - tipc_net_id
 - tipc_remote_management
 - handler_enabled

The above global variables are read often, but written rarely. Use
__read_mostly to prevent them being on the same cacheline as another
variable which is written to often, which would cause cacheline
bouncing.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20 02:26:31 -07:00
Ying Xue f046e7d9be tipc: convert tipc_nametbl_size type from variable to macro
There is nothing changing this variable dynamically, so change
it to a macro to make that more obvious when reading the code.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20 02:26:31 -07:00
Ying Xue 379c0456af tipc: change tipc_net_start routine return value type
Since now tipc_net_start() always returns a success code - 0, its
return value type should be changed from integer to void, which can
avoid unnecessary check for its return value.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20 02:26:30 -07:00
Ying Xue 381294331e tipc: manually inline single use media_name_valid routine
After eliminating the mechanism which checks whether all letters
in media name string are within a given character set, the
media_name_valid routine becomes trivial.  It is also only
used once, so it is unnecessary to keep it as a separate function.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20 02:26:30 -07:00
Ying Xue fc0739385b tipc: remove pointless name sanity check and tipc_alphabet array
There is no real reason to check whether all letters in the given
media name and network interface name are within the character set
defined in tipc_alphabet array. Even if we eliminate the checking,
the rest of checking conditions in tipc_enable_bearer() can ensure
we do not enable an invalid or illegal bearer.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20 02:26:30 -07:00
Ying Xue 4225a398c1 tipc: fix lockdep warning during bearer initialization
When the lockdep validator is enabled, it will report the below
warning when we enable a TIPC bearer:

[ INFO: possible irq lock inversion dependency detected ]
---------------------------------------------------------
Possible interrupt unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(ptype_lock);
                                local_irq_disable();
                                lock(tipc_net_lock);
                                lock(ptype_lock);
   <Interrupt>
   lock(tipc_net_lock);

  *** DEADLOCK ***

the shortest dependencies between 2nd lock and 1st lock:
  -> (ptype_lock){+.+...} ops: 10 {
[...]
SOFTIRQ-ON-W at:
                      [<c1089418>] __lock_acquire+0x528/0x13e0
                      [<c108a360>] lock_acquire+0x90/0x100
                      [<c1553c38>] _raw_spin_lock+0x38/0x50
                      [<c14651ca>] dev_add_pack+0x3a/0x60
                      [<c182da75>] arp_init+0x1a/0x48
                      [<c182dce5>] inet_init+0x181/0x27e
                      [<c1001114>] do_one_initcall+0x34/0x170
                      [<c17f7329>] kernel_init+0x110/0x1b2
                      [<c155b6a2>] kernel_thread_helper+0x6/0x10
[...]
   ... key      at: [<c17e4b10>] ptype_lock+0x10/0x20
   ... acquired at:
    [<c108a360>] lock_acquire+0x90/0x100
    [<c1553c38>] _raw_spin_lock+0x38/0x50
    [<c14651ca>] dev_add_pack+0x3a/0x60
    [<c8bc18d2>] enable_bearer+0xf2/0x140 [tipc]
    [<c8bb283a>] tipc_enable_bearer+0x1ba/0x450 [tipc]
    [<c8bb3a04>] tipc_cfg_do_cmd+0x5c4/0x830 [tipc]
    [<c8bbc032>] handle_cmd+0x42/0xd0 [tipc]
    [<c148e802>] genl_rcv_msg+0x232/0x280
    [<c148d3f6>] netlink_rcv_skb+0x86/0xb0
    [<c148e5bc>] genl_rcv+0x1c/0x30
    [<c148d144>] netlink_unicast+0x174/0x1f0
    [<c148ddab>] netlink_sendmsg+0x1eb/0x2d0
    [<c1456bc1>] sock_aio_write+0x161/0x170
    [<c1135a7c>] do_sync_write+0xac/0xf0
    [<c11360f6>] vfs_write+0x156/0x170
    [<c11361e2>] sys_write+0x42/0x70
    [<c155b0df>] sysenter_do_call+0x12/0x38
[...]
}
  -> (tipc_net_lock){+..-..} ops: 4 {
[...]
    IN-SOFTIRQ-R at:
                     [<c108953a>] __lock_acquire+0x64a/0x13e0
                     [<c108a360>] lock_acquire+0x90/0x100
                     [<c15541cd>] _raw_read_lock_bh+0x3d/0x50
                     [<c8bb874d>] tipc_recv_msg+0x1d/0x830 [tipc]
                     [<c8bc195f>] recv_msg+0x3f/0x50 [tipc]
                     [<c146a5fa>] __netif_receive_skb+0x22a/0x590
                     [<c146ab0b>] netif_receive_skb+0x2b/0xf0
                     [<c13c43d2>] pcnet32_poll+0x292/0x780
                     [<c146b00a>] net_rx_action+0xfa/0x1e0
                     [<c103a4be>] __do_softirq+0xae/0x1e0
[...]
}

>From the log, we can see three different call chains between
CPU0 and CPU1:

Time 0 on CPU0:

  kernel_init()->inet_init()->dev_add_pack()

At time 0, the ptype_lock is held by CPU0 in dev_add_pack();

Time 1 on CPU1:

  tipc_enable_bearer()->enable_bearer()->dev_add_pack()

At time 1, tipc_enable_bearer() first holds tipc_net_lock, and then
wants to take ptype_lock to register TIPC protocol handler into the
networking stack.  But the ptype_lock has been taken by dev_add_pack()
on CPU0, so at this time the dev_add_pack() running on CPU1 has to be
busy looping.

Time 2 on CPU0:

  netif_receive_skb()->recv_msg()->tipc_recv_msg()

At time 2, an incoming TIPC packet arrives at CPU0, hence
tipc_recv_msg() will be invoked. In tipc_recv_msg(), it first wants
to hold tipc_net_lock.  At the moment, below scenario happens:

On CPU0, below is our sequence of taking locks:

  lock(ptype_lock)->lock(tipc_net_lock)

On CPU1, our sequence of taking locks looks like:

  lock(tipc_net_lock)->lock(ptype_lock)

Obviously deadlock may happen in this case.

But please note the deadlock possibly doesn't occur at all when the
first TIPC bearer is enabled.  Before enable_bearer() -- running on
CPU1 does not hold ptype_lock, so the TIPC receive handler (i.e.
recv_msg()) is not registered successfully via dev_add_pack(), so
the tipc_recv_msg() cannot be called by recv_msg() even if a TIPC
message comes to CPU0. But when the second TIPC bearer is
registered, the deadlock can perhaps really happen.

To fix it, we will push the work of registering TIPC protocol
handler into workqueue context. After the change, both paths taking
ptype_lock are always in process contexts, thus, the deadlock should
never occur.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20 02:26:30 -07:00