Commit Graph

149 Commits

Author SHA1 Message Date
Al Viro 72c04902d1 Get "no acls for this inode" right, fix shmem breakage
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-24 16:58:48 -04:00
Al Viro 06b16e9f68 switch shmem to inode->i_acl
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-24 08:17:06 -04:00
Sergei Trofimovich 168f5ac668 mm cleanup: shmem_file_setup: 'char *' -> 'const char *' for name argument
As function shmem_file_setup does not modify/allocate/free/pass given
filename - mark it as const.

Signed-off-by: Sergei Trofimovich <slyfox@inbox.ru>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:44 -07:00
KAMEZAWA Hiroyuki cb4b86ba47 mm: add swap cache interface for swap reference
In a following patch, the usage of swap cache is recorded into swap_map.
This patch is for necessary interface changes to do that.

2 interfaces:

  - swapcache_prepare()
  - swapcache_free()

are added for allocating/freeing refcnt from swap-cache to existing swap
entries.  But implementation itself is not changed under this patch.  At
adding swapcache_free(), memcg's hook code is moved under
swapcache_free().  This is better than using scattered hooks.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: Balbir Singh <balbir@in.ibm.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:42 -07:00
Mimi Zohar c9d9ac525a integrity: move ima_counts_get
Based on discussion on lkml (Andrew Morton and Eric Paris),
move ima_counts_get down a layer into shmem/hugetlb__file_setup().
Resolves drm shmem_file_setup() usage case as well.

HD comment:
  I still think you're doing this at the wrong level, but recognize
  that you probably won't be persuaded until a few more users of
  alloc_file() emerge, all wanting your ima_counts_get().

  Resolving GEM's shmem_file_setup() is an improvement, so I'll say

Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-05-22 09:45:33 +10:00
Mimi Zohar b9fc745db8 integrity: path_check update
- Add support in ima_path_check() for integrity checking without
incrementing the counts. (Required for nfsd.)
- rename and export opencount_get to ima_counts_get
- replace ima_shm_check calls with ima_counts_get
- export ima_path_check

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-05-22 09:43:41 +10:00
Daisuke Nishimura ae3abae64f memcg: fix mem_cgroup_shrink_usage()
Current mem_cgroup_shrink_usage() has two problems.

1. It doesn't call mem_cgroup_out_of_memory and doesn't update
   last_oom_jiffies, so pagefault_out_of_memory invokes global OOM.

2. Considering hierarchy, shrinking has to be done from the
   mem_over_limit, not from the memcg which the page would be charged to.

mem_cgroup_try_charge_swapin() does all of these things properly, so we
use it and call cancel_charge_swapin when it succeeded.

The name of "shrink_usage" is not appropriate for this behavior, so we
change it too.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.cn>
Cc: Paul Menage <menage@google.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-02 15:36:09 -07:00
Hugh Dickins caefba1740 shmem: respect MAX_LFS_FILESIZE
SHMEM_MAX_BYTES was derived from the maximum size of its triple-indirect
swap vector, forgetting to take the MAX_LFS_FILESIZE limit into account.
Never mind 256kB pages, even 8kB pages on 32-bit kernels allowed files to
grow slightly bigger than that supposed maximum.

Fix this by using the min of both (at build time not run time).  And it
happens that this calculation is good as far as 8MB pages on 32-bit or
16MB pages on 64-bit: though SHMSWP_MAX_INDEX gets truncated before that,
it's truncated to such large numbers that we don't need to care.

[akpm@linux-foundation.org: it needs pagemap.h]
[akpm@linux-foundation.org: fix sparc64 min() warnings]
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Yuri Tikhonov <yur@emcraft.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13 15:04:33 -07:00
Yuri Tikhonov 61609d01cb shmem: fix division by zero
Fix a division by zero which we have in shmem_truncate_range() and
shmem_unuse_inode() when using big PAGE_SIZE values (e.g.  256kB on
ppc44x).

With 256kB PAGE_SIZE, the ENTRIES_PER_PAGEPAGE constant becomes too large
(0x1.0000.0000) on a 32-bit kernel, so this patch just changes its type
from 'unsigned long' to 'unsigned long long'.

Hugh: reverted its unsigned long longs in shmem_truncate_range() and
shmem_getpage(): the pagecache index cannot be more than an unsigned long,
so the divisions by zero occurred in unreached code.  It's a pity we need
any ULL arithmetic here, but I found no pretty way to avoid it.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13 15:04:32 -07:00
Hugh Dickins 9fab5619bd shmem: writepage directly to swap
Synopsis: if shmem_writepage calls swap_writepage directly, most shmem
swap loads benefit, and a catastrophic interaction between SLUB and some
flash storage is avoided.

shmem_writepage() has always been peculiar in making no attempt to write:
it has just transferred a shmem page from file cache to swap cache, then
let that page make its way around the LRU again before being written and
freed.

The idea was that people use tmpfs because they want those pages to stay
in RAM; so although we give it an overflow to swap, we should resist
writing too soon, giving those pages a second chance before they can be
reclaimed.

That was always questionable, and I've toyed with this patch for years;
but never had a clear justification to depart from the original design.

It became more questionable in 2.6.28, when the split LRU patches classed
shmem and tmpfs pages as SwapBacked rather than as file_cache: that in
itself gives them more resistance to reclaim than normal file pages.  I
prepared this patch for 2.6.29, but the merge window arrived before I'd
completed gathering statistics to justify sending it in.

Then while comparing SLQB against SLUB, running SLUB on a laptop I'd
habitually used with SLAB, I found SLUB to run my tmpfs kbuild swapping
tests five times slower than SLAB or SLQB - other machines slower too, but
nowhere near so bad.  Simpler "cp -a" swapping tests showed the same.

slub_max_order=0 brings sanity to all, but heavy swapping is too far from
normal to justify such a tuning.  The crucial factor on that laptop turns
out to be that I'm using an SD card for swap.  What happens is this:

By default, SLUB uses order-2 pages for shmem_inode_cache (and many other
fs inodes), so creating tmpfs files under memory pressure brings lumpy
reclaim into play.  One subpage of the order is chosen from the bottom of
the LRU as usual, then the other three picked out from their random
positions on the LRUs.

In a tmpfs load, many of these pages will be ones which already passed
through shmem_writepage, so already have swap allocated.  And though their
offsets on swap were probably allocated sequentially, now that the pages
are picked off at random, their swap offsets are scattered.

But the flash storage on the SD card is very sensitive to having its
writes merged: once swap is written at scattered offsets, performance
falls apart.  Rotating disk seeks increase too, but less disastrously.

So: stop giving shmem/tmpfs pages a second pass around the LRU, write them
out to swap as soon as their swap has been allocated.

It's surely possible to devise an artificial load which runs faster the
old way, one whose sizing is such that the tmpfs pages on their second
pass are the ones that are wanted again, and other pages not.

But I've not yet found such a load: on all machines, under the loads I've
tried, immediate swap_writepage speeds up shmem swapping: especially when
using the SLUB allocator (and more effectively than slub_max_order=0), but
also with the others; and it also reduces the variance between runs.  How
much faster varies widely: a factor of five is rare, 5% is common.

One load which might have suffered: imagine a swapping shmem load in a
limited mem_cgroup on a machine with plenty of memory.  Before 2.6.29 the
swapcache was not charged, and such a load would have run quickest with
the shmem swapcache never written to swap.  But now swapcache is charged,
so even this load benefits from shmem_writepage directly to swap.

Apologies for the #ifndef CONFIG_SWAP swap_writepage() stub in swap.h:
it's silly because that will never get called; but refactoring shmem.c
sensibly according to CONFIG_SWAP will be a separate task.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:15 -07:00
James Morris 703a3cd728 Merge branch 'master' into next 2009-03-24 10:52:46 +11:00
Hugh Dickins 0b0a0806b0 shmem: fix shared anonymous accounting
Each time I exit Firefox, /proc/meminfo's Committed_AS goes down almost
400 kB: OVERCOMMIT_NEVER would be allowing overcommits it should
prohibit.

Commit fc8744adc8 "Stop playing silly
games with the VM_ACCOUNT flag" changed shmem_file_setup() to set the
shmem file's VM_ACCOUNT flag according to VM_NORESERVE not being set in
the vma flags; but did so only _after_ the shmem_acct_size(flags, size)
call which is expected to pre-account a shared anonymous object.

It's all clearer if we switch shmem.c over to use VM_NORESERVE
throughout in place of !VM_ACCOUNT.

But I very nearly sent in a patch which mistakenly removed the
accounting from tmpfs files: shmem_get_inode()'s memset was good for not
setting VM_ACCOUNT, but now it needs to set VM_NORESERVE.

Rather than setting that by default, then perhaps clearing it again in
shmem_file_setup(), let's pass it as a flag to shmem_get_inode(): that
allows us to remove the #ifdef CONFIG_SHMEM from shmem_file_setup().

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-25 12:21:42 -08:00
Mimi Zohar ed850a52af integrity: shmem zero fix
Based on comments from Mike Frysinger and Randy Dunlap:
(http://lkml.org/lkml/2009/2/9/262)
- moved ima.h include before CONFIG_SHMEM test to fix compiler error
  on Blackfin:
mm/shmem.c: In function 'shmem_zero_setup':
mm/shmem.c:2670: error: implicit declaration of function 'ima_shm_check'

- added 'struct linux_binprm' in ima.h to fix compiler warning on Blackfin:
In file included from mm/shmem.c:32:
include/linux/ima.h:25: warning: 'struct linux_binprm' declared inside
parameter list
include/linux/ima.h:25: warning: its scope is only this definition or
declaration, which is probably not what you want

- moved fs.h include within _LINUX_IMA_H definition

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: James Morris <jmorris@namei.org>
2009-02-11 15:27:15 +11:00
James Morris cb5629b10d Merge branch 'master' into next
Conflicts:
	fs/namei.c

Manually merged per:

diff --cc fs/namei.c
index 734f2b5,bbc15c2..0000000
--- a/fs/namei.c
+++ b/fs/namei.c
@@@ -860,9 -848,8 +849,10 @@@ static int __link_path_walk(const char
  		nd->flags |= LOOKUP_CONTINUE;
  		err = exec_permission_lite(inode);
  		if (err == -EAGAIN)
- 			err = vfs_permission(nd, MAY_EXEC);
+ 			err = inode_permission(nd->path.dentry->d_inode,
+ 					       MAY_EXEC);
 +		if (!err)
 +			err = ima_path_check(&nd->path, MAY_EXEC);
   		if (err)
  			break;

@@@ -1525,14 -1506,9 +1509,14 @@@ int may_open(struct path *path, int acc
  		flag &= ~O_TRUNC;
  	}

- 	error = vfs_permission(nd, acc_mode);
+ 	error = inode_permission(inode, acc_mode);
  	if (error)
  		return error;
 +
- 	error = ima_path_check(&nd->path,
++	error = ima_path_check(path,
 +			       acc_mode & (MAY_READ | MAY_WRITE | MAY_EXEC));
 +	if (error)
 +		return error;
  	/*
  	 * An append-only file must be opened in append mode for writing.
  	 */

Signed-off-by: James Morris <jmorris@namei.org>
2009-02-06 11:01:45 +11:00
Mimi Zohar 1df9f0a731 Integrity: IMA file free imbalance
The number of calls to ima_path_check()/ima_file_free()
should be balanced.  An extra call to fput(), indicates
the file could have been accessed without first being
measured.

Although f_count is incremented/decremented in places other
than fget/fput, like fget_light/fput_light and get_file, the
current task must already hold a file refcnt.  The call to
__fput() is delayed until the refcnt becomes 0, resulting
in ima_file_free() flagging any changes.

- add hook to increment opencount for IPC shared memory(SYSV),
  shmat files, and /dev/zero
- moved NULL iint test in opencount_get()

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-02-06 09:05:33 +11:00
Linus Torvalds fc8744adc8 Stop playing silly games with the VM_ACCOUNT flag
The mmap_region() code would temporarily set the VM_ACCOUNT flag for
anonymous shared mappings just to inform shmem_zero_setup() that it
should enable accounting for the resulting shm object.  It would then
clear the flag after calling ->mmap (for the /dev/zero case) or doing
shmem_zero_setup() (for the MAP_ANON case).

This just resulted in vma merge issues, but also made for just
unnecessary confusion.  Use the already-existing VM_NORESERVE flag for
this instead, and let shmem_{zero|file}_setup() just figure it out from
that.

This also happens to make it obvious that the new DRI2 GEM layer uses a
non-reserving backing store for its object allocation - which is quite
possibly not intentional.  But since I didn't want to change semantics
in this patch, I left it alone, and just updated the caller to use the
new flag semantics.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-31 15:08:56 -08:00
KAMEZAWA Hiroyuki b5a84319a4 memcg: fix shmem's swap accounting
Now, you can see following even when swap accounting is enabled.

 1. Create Group 01, and 02.
 2. allocate a "file" on tmpfs by a task under 01.
 3. swap out the "file" (by memory pressure)
 4. Read "file" from a task in group 02.
 5. the charge of "file" is moved to group 02.

This is not ideal behavior. This is because SwapCache which was loaded
by read-ahead is not taken into account..

This is a patch to fix shmem's swapcache behavior.
  - remove mem_cgroup_cache_charge_swapin().
  - Add SwapCache handler routine to mem_cgroup_cache_charge().
    By this, shmem's file cache is charged at add_to_page_cache()
    with GFP_NOWAIT.
  - pass the page of swapcache to shrink_mem_cgroup.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:10 -08:00
KAMEZAWA Hiroyuki 2c26fdd70c memcg: revert gfp mask fix
My patch, memcg-fix-gfp_mask-of-callers-of-charge.patch changed gfp_mask
of callers of charge to be GFP_HIGHUSER_MOVABLE for showing what will
happen at memory reclaim.

But in recent discussion, it's NACKed because it sounds ugly.

This patch is for reverting it and add some clean up to gfp_mask of
callers of charge.  No behavior change but need review before generating
HUNK in deep queue.

This patch also adds explanation to meaning of gfp_mask passed to charge
functions in memcontrol.h.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:06 -08:00
KAMEZAWA Hiroyuki d13d144309 memcg: handle swap caches
SwapCache support for memory resource controller (memcg)

Before mem+swap controller, memcg itself should handle SwapCache in proper
way.  This is cut-out from it.

In current memcg, SwapCache is just leaked and the user can create tons of
SwapCache.  This is a leak of account and should be handled.

SwapCache accounting is done as following.

  charge (anon)
	- charged when it's mapped.
	  (because of readahead, charge at add_to_swap_cache() is not sane)
  uncharge (anon)
	- uncharged when it's dropped from swapcache and fully unmapped.
	  means it's not uncharged at unmap.
	  Note: delete from swap cache at swap-in is done after rmap information
	        is established.
  charge (shmem)
	- charged at swap-in. this prevents charge at add_to_page_cache().

  uncharge (shmem)
	- uncharged when it's dropped from swapcache and not on shmem's
	  radix-tree.

  at migration, check against 'old page' is modified to handle shmem.

Comparing to the old version discussed (and caused troubles), we have
advantages of
  - PCG_USED bit.
  - simple migrating handling.

So, situation is much easier than several months ago, maybe.

[hugh@veritas.com: memcg: handle swap caches build fix]
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:05 -08:00
KAMEZAWA Hiroyuki bced0520fe memcg: fix gfp_mask of callers of charge
Fix misuse of gfp_kernel.

Now, most of callers of mem_cgroup_charge_xxx functions uses GFP_KERNEL.

I think that this is from the fact that page_cgroup *was* dynamically
allocated.

But now, we allocate all page_cgroup at boot.  And
mem_cgroup_try_to_free_pages() reclaim memory from GFP_HIGHUSER_MOVABLE +
specified GFP_RECLAIM_MASK.

  * This is because we just want to reduce memory usage.
    "Where we should reclaim from ?" is not a problem in memcg.

This patch modifies gfp masks to be GFP_HIGUSER_MOVABLE if possible.

Note: This patch is not for fixing behavior but for showing sane information
      in source code.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:04 -08:00
Matt Mackall 853ac43ab1 shmem: unify regular and tiny shmem
tiny-shmem shares most of its 130 lines of code with shmem and tends to
break when particular bits of shmem get modified.  Unifying saves code and
makes keeping these two in sync much easier.

before:
  14367	    392	     24	  14783	   39bf	mm/shmem.o
    396      72       8     476	    1dc	mm/tiny-shmem.o

after:
  14367	    392	     24	  14783	   39bf	mm/shmem.o
    412	     72       8     492	    1ec	mm/shmem.o tiny

Signed-off-by: Matt Mackall <mpm@selenic.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:08 -08:00
Hugh Dickins 390722baa7 mm: don't mark_page_accessed in shmem_fault
Following "mm: don't mark_page_accessed in fault path", which now
places a mark_page_accessed() in zap_pte_range(), we should remove
the mark_page_accessed() from shmem_fault().

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:58:58 -08:00
David Howells 76aac0e9a1 CRED: Wrap task credential accesses in the core kernel
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.

Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().

Change some task->e?[ug]id to task_e?[ug]id().  In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-audit@redhat.com
Cc: containers@lists.linux-foundation.org
Cc: linux-mm@kvack.org
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:12 +11:00
Alan Cox 731572d39f nfsd: fix vm overcommit crash
Junjiro R.  Okajima reported a problem where knfsd crashes if you are
using it to export shmemfs objects and run strict overcommit.  In this
situation the current->mm based modifier to the overcommit goes through a
NULL pointer.

We could simply check for NULL and skip the modifier but we've caught
other real bugs in the past from mm being NULL here - cases where we did
need a valid mm set up (eg the exec bug about a year ago).

To preserve the checks and get the logic we want shuffle the checking
around and add a new helper to the vm_ security wrappers

Also fix a current->mm reference in nommu that should use the passed mm

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix build]
Reported-by: Junjiro R. Okajima <hooanon05@yahoo.co.jp>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-30 11:38:47 -07:00
Lee Schermerhorn 89e004ea55 SHM_LOCKED pages are unevictable
Shmem segments locked into memory via shmctl(SHM_LOCKED) should not be
kept on the normal LRU, since scanning them is a waste of time and might
throw off kswapd's balancing algorithms.  Place them on the unevictable
LRU list instead.

Use the AS_UNEVICTABLE flag to mark address_space of SHM_LOCKed shared
memory regions as unevictable.  Then these pages will be culled off the
normal LRU lists during vmscan.

Add new wrapper function to clear the mapping's unevictable state when/if
shared memory segment is munlocked.

Add 'scan_mapping_unevictable_page()' to mm/vmscan.c to scan all pages in
the shmem segment's mapping [struct address_space] for evictability now
that they're no longer locked.  If so, move them to the appropriate zone
lru list.

Changes depend on [CONFIG_]UNEVICTABLE_LRU.

[kosaki.motohiro@jp.fujitsu.com: revert shm change]
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:50:26 -07:00
Rik van Riel 4f98a2fee8 vmscan: split LRU lists into anon & file sets
Split the LRU lists in two, one set for pages that are backed by real file
systems ("file") and one for pages that are backed by memory and swap
("anon").  The latter includes tmpfs.

The advantage of doing this is that the VM will not have to scan over lots
of anonymous pages (which we generally do not want to swap out), just to
find the page cache pages that it should evict.

This patch has the infrastructure and a basic policy to balance how much
we scan the anon lists and how much we scan the file lists.  The big
policy changes are in separate patches.

[lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset]
[kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru]
[kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page]
[hugh@veritas.com: memcg swapbacked pages active]
[hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED]
[akpm@linux-foundation.org: fix /proc/vmstat units]
[nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration]
[kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo]
[kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()]
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:50:25 -07:00
Rik van Riel b2e185384f define page_file_cache() function
Define page_file_cache() function to answer the question:
	is page backed by a file?

Originally part of Rik van Riel's split-lru patch.  Extracted to make
available for other, independent reclaim patches.

Moved inline function to linux/mm_inline.h where it will be needed by
subsequent "split LRU" and "noreclaim" patches.

Unfortunately this needs to use a page flag, since the PG_swapbacked state
needs to be preserved all the way to the point where the page is last
removed from the LRU.  Trying to derive the status from other info in the
page resulted in wrong VM statistics in earlier split VM patchsets.

The total number of page flags in use on a 32 bit machine after this patch
is 19.

[akpm@linux-foundation.org: fix up out-of-order merge fallout]
[hugh@veritas.com: splitlru: shmem_getpage SetPageSwapBacked sooner[
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: MinChan Kim <minchan.kim@gmail.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:50:25 -07:00
Keith Packard 395e0ddc44 Export shmem_file_setup for DRM-GEM
GEM needs to create shmem files to back buffer objects.  Though currently
creation of files for objects could have been driven from userland, the
modesetting work will require allocation of buffer objects before userland
is running, for boot-time message display.

Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:11 +10:00
Mimi Zohar 9256292782 integrity: special fs magic
Discussion on the mailing list questioned the use of these
magic values in userspace, concluding these values are already
exported to userspace via statfs and their correct/incorrect
usage is left up to the userspace application.

  - Move special fs magic number definitions to magic.h
  - Add magic.h include

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Reviewed-by: James Morris <jmorris@namei.org>
Signed-off-by: James Morris <jmorris@namei.org>
2008-10-13 09:47:43 +11:00
Nick Piggin 529ae9aaa0 mm: rename page trylock
Converting page lock to new locking bitops requires a change of page flag
operation naming, so we might as well convert it to something nicer
(!TestSetPageLocked_Lock => trylock_page, SetPageLocked => set_page_locked).

This also facilitates lockdeping of page lock.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-04 21:31:34 -07:00
Hugh Dickins 14fcc23fdc tmpfs: fix kernel BUG in shmem_delete_inode
SuSE's insserve initscript ordering program hits kernel BUG at mm/shmem.c:814
on 2.6.26.  It's using posix_fadvise on directories, and the shmem_readpage
method added in 2.6.23 is letting POSIX_FADV_WILLNEED allocate useless pages
to a tmpfs directory, incrementing i_blocks count but never decrementing it.

Fix this by assigning shmem_aops (pointing to readpage and writepage and
set_page_dirty) only when it's needed, on a regular file or a long symlink.

Many thanks to Kel for outstanding bugreport and steps to reproduce it.

Reported-by: Kel Modderman <kel@otaku42.de>
Tested-by: Kel Modderman <kel@otaku42.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: <stable@kernel.org>		[2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 16:30:20 -07:00
Alexey Dobriyan 51cc50685a SL*B: drop kmem cache argument from constructor
Kmem cache passed to constructor is only needed for constructors that are
themselves multiplexeres.  Nobody uses this "feature", nor does anybody uses
passed kmem cache in non-trivial way, so pass only pointer to object.

Non-trivial places are:
	arch/powerpc/mm/init_64.c
	arch/powerpc/mm/hugetlbpage.c

This is flag day, yes.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Matt Mackall <mpm@selenic.com>
[akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c]
[akpm@linux-foundation.org: fix mm/slab.c]
[akpm@linux-foundation.org: fix ubifs]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:07 -07:00
Nick Piggin e286781d5f mm: speculative page references
If we can be sure that elevating the page_count on a pagecache page will
pin it, we can speculatively run this operation, and subsequently check to
see if we hit the right page rather than relying on holding a lock or
otherwise pinning a reference to the page.

This can be done if get_page/put_page behaves consistently throughout the
whole tree (ie.  if we "get" the page after it has been used for something
else, we must be able to free it with a put_page).

Actually, there is a period where the count behaves differently: when the
page is free or if it is a constituent page of a compound page.  We need
an atomic_inc_not_zero operation to ensure we don't try to grab the page
in either case.

This patch introduces the core locking protocol to the pagecache (ie.
adds page_cache_get_speculative, and tweaks some update-side code to make
it work).

Thanks to Hugh for pointing out an improvement to the algorithm setting
page_count to zero when we have control of all references, in order to
hold off speculative getters.

[kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()]
[hugh@veritas.com: fix add_to_page_cache]
[akpm@linux-foundation.org: repair a comment]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:06 -07:00
KAMEZAWA Hiroyuki c9b0ed5148 memcg: helper function for relcaim from shmem.
A new call, mem_cgroup_shrink_usage() is added for shmem handling and
relacing non-standard usage of mem_cgroup_charge/uncharge.

Now, shmem calls mem_cgroup_charge() just for reclaim some pages from
mem_cgroup.  In general, shmem is used by some process group and not for
global resource (like file caches).  So, it's reasonable to reclaim pages
from mem_cgroup where shmem is mainly used.

[hugh@veritas.com: shmem_getpage release page sooner]
[hugh@veritas.com: mem_cgroup_shrink_usage css_put]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Paul Menage <menage@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:37 -07:00
KAMEZAWA Hiroyuki 69029cd550 memcg: remove refcnt from page_cgroup
memcg: performance improvements

Patch Description
 1/5 ... remove refcnt fron page_cgroup patch (shmem handling is fixed)
 2/5 ... swapcache handling patch
 3/5 ... add helper function for shmem's memory reclaim patch
 4/5 ... optimize by likely/unlikely ppatch
 5/5 ... remove redundunt check patch (shmem handling is fixed.)

Unix bench result.

== 2.6.26-rc2-mm1 + memory resource controller
Execl Throughput                           2915.4 lps   (29.6 secs, 3 samples)
C Compiler Throughput                      1019.3 lpm   (60.0 secs, 3 samples)
Shell Scripts (1 concurrent)               5796.0 lpm   (60.0 secs, 3 samples)
Shell Scripts (8 concurrent)               1097.7 lpm   (60.0 secs, 3 samples)
Shell Scripts (16 concurrent)               565.3 lpm   (60.0 secs, 3 samples)
File Read 1024 bufsize 2000 maxblocks    1022128.0 KBps  (30.0 secs, 3 samples)
File Write 1024 bufsize 2000 maxblocks   544057.0 KBps  (30.0 secs, 3 samples)
File Copy 1024 bufsize 2000 maxblocks    346481.0 KBps  (30.0 secs, 3 samples)
File Read 256 bufsize 500 maxblocks      319325.0 KBps  (30.0 secs, 3 samples)
File Write 256 bufsize 500 maxblocks     148788.0 KBps  (30.0 secs, 3 samples)
File Copy 256 bufsize 500 maxblocks       99051.0 KBps  (30.0 secs, 3 samples)
File Read 4096 bufsize 8000 maxblocks    2058917.0 KBps  (30.0 secs, 3 samples)
File Write 4096 bufsize 8000 maxblocks   1606109.0 KBps  (30.0 secs, 3 samples)
File Copy 4096 bufsize 8000 maxblocks    854789.0 KBps  (30.0 secs, 3 samples)
Dc: sqrt(2) to 99 decimal places         126145.2 lpm   (30.0 secs, 3 samples)

                     INDEX VALUES
TEST                                        BASELINE     RESULT      INDEX

Execl Throughput                                43.0     2915.4      678.0
File Copy 1024 bufsize 2000 maxblocks         3960.0   346481.0      875.0
File Copy 256 bufsize 500 maxblocks           1655.0    99051.0      598.5
File Copy 4096 bufsize 8000 maxblocks         5800.0   854789.0     1473.8
Shell Scripts (8 concurrent)                     6.0     1097.7     1829.5
                                                                 =========
     FINAL SCORE                                                     991.3

== 2.6.26-rc2-mm1 + this set ==
Execl Throughput                           3012.9 lps   (29.9 secs, 3 samples)
C Compiler Throughput                       981.0 lpm   (60.0 secs, 3 samples)
Shell Scripts (1 concurrent)               5872.0 lpm   (60.0 secs, 3 samples)
Shell Scripts (8 concurrent)               1120.3 lpm   (60.0 secs, 3 samples)
Shell Scripts (16 concurrent)               578.0 lpm   (60.0 secs, 3 samples)
File Read 1024 bufsize 2000 maxblocks    1003993.0 KBps  (30.0 secs, 3 samples)
File Write 1024 bufsize 2000 maxblocks   550452.0 KBps  (30.0 secs, 3 samples)
File Copy 1024 bufsize 2000 maxblocks    347159.0 KBps  (30.0 secs, 3 samples)
File Read 256 bufsize 500 maxblocks      314644.0 KBps  (30.0 secs, 3 samples)
File Write 256 bufsize 500 maxblocks     151852.0 KBps  (30.0 secs, 3 samples)
File Copy 256 bufsize 500 maxblocks      101000.0 KBps  (30.0 secs, 3 samples)
File Read 4096 bufsize 8000 maxblocks    2033256.0 KBps  (30.0 secs, 3 samples)
File Write 4096 bufsize 8000 maxblocks   1611814.0 KBps  (30.0 secs, 3 samples)
File Copy 4096 bufsize 8000 maxblocks    847979.0 KBps  (30.0 secs, 3 samples)
Dc: sqrt(2) to 99 decimal places         128148.7 lpm   (30.0 secs, 3 samples)

                     INDEX VALUES
TEST                                        BASELINE     RESULT      INDEX

Execl Throughput                                43.0     3012.9      700.7
File Copy 1024 bufsize 2000 maxblocks         3960.0   347159.0      876.7
File Copy 256 bufsize 500 maxblocks           1655.0   101000.0      610.3
File Copy 4096 bufsize 8000 maxblocks         5800.0   847979.0     1462.0
Shell Scripts (8 concurrent)                     6.0     1120.3     1867.2
                                                                 =========
     FINAL SCORE                                                    1004.6

This patch:

Remove refcnt from page_cgroup().

After this,

 * A page is charged only when !page_mapped() && no page_cgroup is assigned.
	* Anon page is newly mapped.
	* File page is added to mapping->tree.

 * A page is uncharged only when
	* Anon page is fully unmapped.
	* File page is removed from LRU.

There is no change in behavior from user's view.

This patch also removes unnecessary calls in rmap.c which was used only for
refcnt mangement.

[akpm@linux-foundation.org: fix warning]
[hugh@veritas.com: fix shmem_unuse_inode charging]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Paul Menage <menage@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:37 -07:00
Hugh Dickins bcd78e4961 tmpfs: support aio
We have a request for tmpfs to support the AIO interface: easily done, no
more than replacing the old shmem_file_read by shmem_file_aio_read,
cribbed from generic_file_aio_read.  (In 2.6.25 its write side was already
changed to use generic_file_aio_write.)

Incorporate cleanups from Andrew Morton and Harvey Harrison.

Tests out fine with LTP's ltp-aiodio.sh, given hacks (not included) to
support O_DIRECT.  tmpfs cannot honestly support O_DIRECT: its
cache-avoiding-IO nature is at odds with direct IO-avoiding-cache.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Tested-by: Lawrence Greenfield <leg@google.com>
Cc: Christoph Rohland <hans-christoph.rohland@sap.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:16 -07:00
Miklos Szeredi e4ad08fe64 mm: bdi: add separate writeback accounting capability
Add a new BDI capability flag: BDI_CAP_NO_ACCT_WB.  If this flag is
set, then don't update the per-bdi writeback stats from
test_set_page_writeback() and test_clear_page_writeback().

Misc cleanups:

 - convert bdi_cap_writeback_dirty() and friends to static inline functions
 - create a flag that includes all three dirty/writeback related flags,
   since almst all users will want to have them toghether

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:50 -07:00
Lee Schermerhorn 71fe804b6d mempolicy: use struct mempolicy pointer in shmem_sb_info
This patch replaces the mempolicy mode, mode_flags, and nodemask in the
shmem_sb_info struct with a struct mempolicy pointer, initialized to NULL.
This removes dependency on the details of mempolicy from shmem.c and hugetlbfs
inode.c and simplifies the interfaces.

mpol_parse_str() in mempolicy.c is changed to return, via a pointer to a
pointer arg, a struct mempolicy pointer on success.  For MPOL_DEFAULT, the
returned pointer is NULL.  Further, mpol_parse_str() now takes a 'no_context'
argument that causes the input nodemask to be stored in the w.user_nodemask of
the created mempolicy for use when the mempolicy is installed in a tmpfs inode
shared policy tree.  At that time, any cpuset contextualization is applied to
the original input nodemask.  This preserves the previous behavior where the
input nodemask was stored in the superblock.  We can think of the returned
mempolicy as "context free".

Because mpol_parse_str() is now calling mpol_new(), we can remove from
mpol_to_str() the semantic checks that mpol_new() already performs.

Add 'no_context' parameter to mpol_to_str() to specify that it should format
the nodemask in w.user_nodemask for 'bind' and 'interleave' policies.

Change mpol_shared_policy_init() to take a pointer to a "context free" struct
mempolicy and to create a new, "contextualized" mempolicy using the mode,
mode_flags and user_nodemask from the input mempolicy.

  Note: we know that the mempolicy passed to mpol_to_str() or
  mpol_shared_policy_init() from a tmpfs superblock is "context free".  This
  is currently the only instance thereof.  However, if we found more uses for
  this concept, and introduced any ambiguity as to whether a mempolicy was
  context free or not, we could add another internal mode flag to identify
  context free mempolicies.  Then, we could remove the 'no_context' argument
  from mpol_to_str().

Added shmem_get_sbmpol() to return a reference counted superblock mempolicy,
if one exists, to pass to mpol_shared_policy_init().  We must add the
reference under the sb stat_lock to prevent races with replacement of the mpol
by remount.  This reference is removed in mpol_shared_policy_init().

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: another build fix]
[akpm@linux-foundation.org: yet another build fix]
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:25 -07:00
Lee Schermerhorn 095f1fc4eb mempolicy: rework shmem mpol parsing and display
mm/shmem.c currently contains functions to parse and display memory policy
strings for the tmpfs 'mpol' mount option.  Move this to mm/mempolicy.c with
the rest of the mempolicy support.  With subsequent patches, we'll be able to
remove knowledge of the details [mode, flags, policy, ...] completely from
shmem.c

1) replace shmem_parse_mpol() in mm/shmem.c with mpol_parse_str() in
   mm/mempolicy.c.  Rework to use the policy_types[] array [used by
   mpol_to_str()] to look up mode by name.

2) use mpol_to_str() to format policy for shmem_show_mpol().  mpol_to_str()
   expects a pointer to a struct mempolicy, so temporarily construct one.
   This will be replaced with a reference to a struct mempolicy in the tmpfs
   superblock in a subsequent patch.

   NOTE 1: I changed mpol_to_str() to use a colon ':' rather than an equal
   sign '=' as the nodemask delimiter to match mpol_parse_str() and the
   tmpfs/shmem mpol mount option formatting that now uses mpol_to_str().  This
   is a user visible change to numa_maps, but then the addition of the mode
   flags already changed the display.  It makes sense to me to have the mounts
   and numa_maps display the policy in the same format.  However, if anyone
   objects strongly, I can pass the desired nodemask delimeter as an arg to
   mpol_to_str().

   Note 2: Like show_numa_map(), I don't check the return code from
   mpol_to_str().  I do use a longer buffer than the one provided by
   show_numa_map(), which seems to have sufficed so far.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:24 -07:00
Lee Schermerhorn 52cd3b0740 mempolicy: rework mempolicy Reference Counting [yet again]
After further discussion with Christoph Lameter, it has become clear that my
earlier attempts to clean up the mempolicy reference counting were a bit of
overkill in some areas, resulting in superflous ref/unref in what are usually
fast paths.  In other areas, further inspection reveals that I botched the
unref for interleave policies.

A separate patch, suitable for upstream/stable trees, fixes up the known
errors in the previous attempt to fix reference counting.

This patch reworks the memory policy referencing counting and, one hopes,
simplifies the code.  Maybe I'll get it right this time.

See the update to the numa_memory_policy.txt document for a discussion of
memory policy reference counting that motivates this patch.

Summary:

Lookup of mempolicy, based on (vma, address) need only add a reference for
shared policy, and we need only unref the policy when finished for shared
policies.  So, this patch backs out all of the unneeded extra reference
counting added by my previous attempt.  It then unrefs only shared policies
when we're finished with them, using the mpol_cond_put() [conditional put]
helper function introduced by this patch.

Note that shmem_swapin() calls read_swap_cache_async() with a dummy vma
containing just the policy.  read_swap_cache_async() can call alloc_page_vma()
multiple times, so we can't let alloc_page_vma() unref the shared policy in
this case.  To avoid this, we make a copy of any non-null shared policy and
remove the MPOL_F_SHARED flag from the copy.  This copy occurs before reading
a page [or multiple pages] from swap, so the overhead should not be an issue
here.

I introduced a new static inline function "mpol_cond_copy()" to copy the
shared policy to an on-stack policy and remove the flags that would require a
conditional free.  The current implementation of mpol_cond_copy() assumes that
the struct mempolicy contains no pointers to dynamically allocated structures
that must be duplicated or reference counted during copy.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:24 -07:00
Lee Schermerhorn f0be3d32b0 mempolicy: rename mpol_free to mpol_put
This is a change that was requested some time ago by Mel Gorman.  Makes sense
to me, so here it is.

Note: I retain the name "mpol_free_shared_policy()" because it actually does
free the shared_policy, which is NOT a reference counted object.  However, ...

The mempolicy object[s] referenced by the shared_policy are reference counted,
so mpol_put() is used to release the reference held by the shared_policy.  The
mempolicy might not be freed at this time, because some task attached to the
shared object associated with the shared policy may be in the process of
allocating a page based on the mempolicy.  In that case, the task performing
the allocation will hold a reference on the mempolicy, obtained via
mpol_shared_policy_lookup().  The mempolicy will be freed when all tasks
holding such a reference have called mpol_put() for the mempolicy.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:23 -07:00
Lee Schermerhorn a43361cf3c mempolicy: fix parsing of tmpfs mpol mount option
Parsing of new mode flags in the tmpfs mpol mount option is slightly broken:

Setting a valid flag works OK:
	#mount -o remount,mpol=bind=static:1-2 /dev/shm
	#mount
	...
	tmpfs on /dev/shm type tmpfs (rw,mpol=bind=static:1-2)
	...

However, we can't remove them or change them, once we've
set a valid flag:

	#mount -o remount,mpol=bind:1-2 /dev/shm
	#mount
	...
	tmpfs on /dev/shm type tmpfs (rw,mpol=bind:1-2)
	...

It SAYS it removed it, but that's just a copy of the input
string.  If we now try to set it to a different flag, we
get:

	#mount -o remount,mpol=bind=relative:1-2 /dev/shm
	mount: /dev/shm not mounted already, or bad option

And on the console, we see:
	tmpfs: Bad value 'bind' for mount option 'mpol'
	                      ^ lost remainder of string

Furthermore, bogus flags are accepted with out error.
Granted, they are a no-op:

	#mount -o remount,mpol=interleave=foo:0-3 /dev/shm
	#mount
	...
	tmpfs on /dev/shm type tmpfs (rw,mpol=interleave=foo:0-3)

Again, that's just a copy of the input string shown by the mount command.

This patch fixes the behavior by pre-zeroing the flags so that only one of the
mutually exclusive flags can be set at one time.  It also reports an error
when an unrecognized flag is specified.

The check for both flags being set is removed because it can't happen with
this implementation.  If we ever want to support multiple non-exclusive flags,
this area will need rework and we will need to check that any mutually
exclusive flags aren't specified.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Eric Whitney <eric.whitney@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:20 -07:00
David Rientjes 4c50bc0116 mempolicy: add MPOL_F_RELATIVE_NODES flag
Adds another optional mode flag, MPOL_F_RELATIVE_NODES, that specifies
nodemasks passed via set_mempolicy() or mbind() should be considered relative
to the current task's mems_allowed.

When the mempolicy is created, the passed nodemask is folded and mapped onto
the current task's mems_allowed.  For example, consider a task using
set_mempolicy() to pass MPOL_INTERLEAVE | MPOL_F_RELATIVE_NODES with a
nodemask of 1-3.  If current's mems_allowed is 4-7, the effected nodemask is
5-7 (the second, third, and fourth node of mems_allowed).

If the same task is attached to a cpuset, the mempolicy nodemask is rebound
each time the mems are changed.  Some possible rebinds and results are:

	mems			result
	1-3			1-3
	1-7			2-4
	1,5-6			1,5-6
	1,5-7			5-7

Likewise, the zonelist built for MPOL_BIND acts on the set of zones assigned
to the resultant nodemask from the relative remap.

In the MPOL_PREFERRED case, the preferred node is remapped from the currently
effected nodemask to the relative nodemask.

This mempolicy mode flag was conceived of by Paul Jackson <pj@sgi.com>.

Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:19 -07:00
David Rientjes f5b087b52f mempolicy: add MPOL_F_STATIC_NODES flag
Add an optional mempolicy mode flag, MPOL_F_STATIC_NODES, that suppresses the
node remap when the policy is rebound.

Adds another member to struct mempolicy, nodemask_t user_nodemask, as part of
a union with cpuset_mems_allowed:

	struct mempolicy {
		...
		union {
			nodemask_t cpuset_mems_allowed;
			nodemask_t user_nodemask;
		} w;
	}

that stores the the nodemask that the user passed when he or she created the
mempolicy via set_mempolicy() or mbind().  When using MPOL_F_STATIC_NODES,
which is passed with any mempolicy mode, the user's passed nodemask
intersected with the VMA or task's allowed nodes is always used when
determining the preferred node, setting the MPOL_BIND zonelist, or creating
the interleave nodemask.  This happens whenever the policy is rebound,
including when a task's cpuset assignment changes or the cpuset's mems are
changed.

This creates an interesting side-effect in that it allows the mempolicy
"intent" to lie dormant and uneffected until it has access to the node(s) that
it desires.  For example, if you currently ask for an interleaved policy over
a set of nodes that you do not have access to, the mempolicy is not created
and the task continues to use the previous policy.  With this change, however,
it is possible to create the same mempolicy; it is only effected when access
to nodes in the nodemask is acquired.

It is also possible to mount tmpfs with the static nodemask behavior when
specifying a node or nodemask.  To do this, simply add "=static" immediately
following the mempolicy mode at mount time:

	mount -o remount mpol=interleave=static:1-3

Also removes mpol_check_policy() and folds its logic into mpol_new() since it
is now obsoleted.  The unused vma_mpol_equal() is also removed.

Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:19 -07:00
David Rientjes 028fec414d mempolicy: support optional mode flags
With the evolution of mempolicies, it is necessary to support mempolicy mode
flags that specify how the policy shall behave in certain circumstances.  The
most immediate need for mode flag support is to suppress remapping the
nodemask of a policy at the time of rebind.

Both the mempolicy mode and flags are passed by the user in the 'int policy'
formal of either the set_mempolicy() or mbind() syscall.  A new constant,
MPOL_MODE_FLAGS, represents the union of legal optional flags that may be
passed as part of this int.  Mempolicies that include illegal flags as part of
their policy are rejected as invalid.

An additional member to struct mempolicy is added to support the mode flags:

	struct mempolicy {
		...
		unsigned short policy;
		unsigned short flags;
	}

The splitting of the 'int' actual passed by the user is done in
sys_set_mempolicy() and sys_mbind() for their respective syscalls.  This is
done by intersecting the actual with MPOL_MODE_FLAGS, rejecting the syscall of
there are additional flags, and storing it in the new 'flags' member of struct
mempolicy.  The intersection of the actual with ~MPOL_MODE_FLAGS is stored in
the 'policy' member of the struct and all current users of pol->policy remain
unchanged.

The union of the policy mode and optional mode flags is passed back to the
user in get_mempolicy().

This combination of mode and flags within the same actual does not break
userspace code that relies on get_mempolicy(&policy, ...) and either

	switch (policy) {
	case MPOL_BIND:
		...
	case MPOL_INTERLEAVE:
		...
	};

statements or

	if (policy == MPOL_INTERLEAVE) {
		...
	}

statements.  Such applications would need to use optional mode flags when
calling set_mempolicy() or mbind() for these previously implemented statements
to stop working.  If an application does start using optional mode flags, it
will need to mask the optional flags off the policy in switch and conditional
statements that only test mode.

An additional member is also added to struct shmem_sb_info to store the
optional mode flags.

[hugh@veritas.com: shmem mpol: fix build warning]
Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:19 -07:00
David Rientjes a3b51e0142 mempolicy: convert MPOL constants to enum
The mempolicy mode constants, MPOL_DEFAULT, MPOL_PREFERRED, MPOL_BIND, and
MPOL_INTERLEAVE, are better declared as part of an enum since they are
sequentially numbered and cannot be combined.

The policy member of struct mempolicy is also converted from type short to
type unsigned short.  A negative policy does not have any legitimate meaning,
so it is possible to change its type in preparation for adding optional mode
flags later.

The equivalent member of struct shmem_sb_info is also changed from int to
unsigned short.

For compatibility, the policy formal to get_mempolicy() remains as a pointer
to an int:

	int get_mempolicy(int *policy, unsigned long *nmask,
			  unsigned long maxnode, unsigned long addr,
			  unsigned long flags);

although the only possible values is the range of type unsigned short.

Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:19 -07:00
Randy Dunlap 4671181020 mm/shmem and tiny-shmem: fix some kernel-doc
Convert tiny-shmem.c function comments to kernel-doc.  Add parameters and
convert/fix other kernel-doc in shmem.c.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-19 18:53:35 -07:00
Hugh Dickins 7e924aafa4 memcg: mem_cgroup_charge never NULL
My memcgroup patch to fix hang with shmem/tmpfs added NULL page handling to
mem_cgroup_charge_common.  It seemed convenient at the time, but hard to
justify now: there's a perfectly appropriate swappage to charge and uncharge
instead, this is not on any hot path through shmem_getpage, and no performance
hit was observed from the slight extra overhead.

So revert that NULL page handling from mem_cgroup_charge_common; and make it
clearer by bringing page_cgroup_assign_new_page_cgroup into its body - that
was a helper I found more of a hindrance to understanding.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: David Rientjes <rientjes@google.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hirokazu Takahashi <taka@valinux.co.jp>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 16:35:15 -08:00
Andrew Morton b76db73540 mount-options-fix-tmpfs-fix
Documentation/SubmitCheckist, please.

Cc: Hugh Dickins <hugh@veritas.com>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:41 -08:00
akpm@linux-foundation.org 680d794bab mount options: fix tmpfs
Add .show_options super operation to tmpfs.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:41 -08:00