Commit Graph

2032 Commits

Author SHA1 Message Date
Masahiro Yamada d503ac531a kbuild: rename LDFLAGS to KBUILD_LDFLAGS
Commit a0f97e06a4 ("kbuild: enable 'make CFLAGS=...' to add
additional options to CC") renamed CFLAGS to KBUILD_CFLAGS.

Commit 222d394d30 ("kbuild: enable 'make AFLAGS=...' to add
additional options to AS") renamed AFLAGS to KBUILD_AFLAGS.

Commit 06c5040cdb ("kbuild: enable 'make CPPFLAGS=...' to add
additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS.

For some reason, LDFLAGS was not renamed.

Using a well-known variable like LDFLAGS may result in accidental
override of the variable.

Kbuild generally uses KBUILD_ prefixed variables for the internally
appended options, so here is one more conversion to sanitize the
naming convention.

I did not touch Makefiles under tools/ since the tools build system
is a different world.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-24 08:22:08 +09:00
Souptick Joarder 50a7ca3c6f mm: convert return type of handle_mm_fault() caller to vm_fault_t
Use new return type vm_fault_t for fault handler.  For now, this is just
documenting that the function returns a VM_FAULT value rather than an
errno.  Once all instances are converted, vm_fault_t will become a
distinct type.

Ref-> commit 1c8f422059 ("mm: change return type to vm_fault_t")

In this patch all the caller of handle_mm_fault() are changed to return
vm_fault_t type.

Link: http://lkml.kernel.org/r/20180617084810.GA6730@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: David S. Miller <davem@davemloft.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Levin, Alexander (Sasha Levin)" <alexander.levin@verizon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 16:20:28 -07:00
Linus Torvalds fa1b5d09d0 Consolidation of Kconfig files by Christoph Hellwig.
Move the source statements of arch-independent Kconfig files instead of
 duplicating the includes in every arch/$(SRCARCH)/Kconfig.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbdFsfAAoJED2LAQed4NsGxHsP/1tmA57OOOj8oGxO2OXhXVbr
 Q0MZqCoV4bqMvK/hgCQdl9f+tp0m+j12x4xDLdVf4OqnTXMbqvPDu3uQVKvaj/k1
 gHhsFA1tFgSbuJ8InltUsrPEQqbceeJsj50xHVAKijqI6LYeRPPSU7aE9obn+OzH
 n2nd5sLKvMI/dqdJvW6i5KPydqTH3r3iA7D+ne/XQj0s0EMXvXUPmDT1+ijTnM4a
 yfm6W5p7L/c3Ugf1Pz5PfnPl4BxBwZMfW5ie/UO8j5C6Rl0iPaOGuuHurocaaJb3
 MefR/7NEAR3G8MhJyL2+70jbbwhjpqR2b5ooz1vpuulPHxjeU45BY60XIBWq1afR
 ewsc12MMCYB695ieYWoHdaWgxD/jhffyRuajfpkXKIZEMgDxS03sMhdULXENVMx1
 M0ZQ01g/NLWt9ti9DY3eTKB3ymOhnBa1sa77nGGUHkITq4DQKwPX1J9FP/HT6RNt
 uOvzeH5kGzc7tqOlZAO0kHbwhQG1uqGcd78IYd4lgf/XfkSgDERTWjnJmnQbwr9m
 3PFuST2u8eyO+8Lh1MK76TXOEkXsHMdFugPmb6SlgtMEPKGVLDPlsj52o/LFtgzl
 eygfMiBFr2+ttkZ6IpNcpmQ4IztmDpz6XoMk3PqDAfUTUSYpCnq1gAEuff/eisCM
 Odva1ZZaeQ7WpxhsP8rr
 =gsQJ
 -----END PGP SIGNATURE-----

Merge tag 'kconfig-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kconfig consolidation from Masahiro Yamada:
 "Consolidation of Kconfig files by Christoph Hellwig.

  Move the source statements of arch-independent Kconfig files instead
  of duplicating the includes in every arch/$(SRCARCH)/Kconfig"

* tag 'kconfig-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: add a Memory Management options" menu
  kconfig: move the "Executable file formats" menu to fs/Kconfig.binfmt
  kconfig: use a menu in arch/Kconfig to reduce clutter
  kconfig: include kernel/Kconfig.preempt from init/Kconfig
  Kconfig: consolidate the "Kernel hacking" menu
  kconfig: include common Kconfig files from top-level Kconfig
  kconfig: remove duplicate SWAP symbol defintions
  um: create a proper drivers Kconfig
  um: cleanup Kconfig files
  um: stop abusing KBUILD_KCONFIG
2018-08-15 13:05:12 -07:00
Masahiro Yamada 0004438a16 um: clean up archheaders recipe
Now that '%asm-generic' is added to no-dot-config-targets,
'make asm-generic' does not include the kernel configuration.

You can simply do 'make asm-generic' in the recursed top Makefile
without bothering syncconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Richard Weinberger <richard@nod.at>
2018-08-07 21:30:36 +09:00
Masahiro Yamada 13d3d01e26 um: fix parallel building with O= option
Randy Dunlap reports UML occasionally fails to build with -j<N> and
O=<builddir> options.

  make[1]: Entering directory '/home/rdunlap/mmotm-2018-0802-1529/UM64'
    UPD     include/generated/uapi/linux/version.h
    WRAP    arch/x86/include/generated/asm/dma-contiguous.h
    WRAP    arch/x86/include/generated/asm/export.h
    WRAP    arch/x86/include/generated/asm/early_ioremap.h
    WRAP    arch/x86/include/generated/asm/mcs_spinlock.h
    WRAP    arch/x86/include/generated/asm/mm-arch-hooks.h
    WRAP    arch/x86/include/generated/uapi/asm/bpf_perf_event.h
    WRAP    arch/x86/include/generated/uapi/asm/poll.h
    GEN     ./Makefile
  make[2]: *** No rule to make target 'archheaders'.  Stop.
  arch/um/Makefile:119: recipe for target 'archheaders' failed
  make[1]: *** [archheaders] Error 2
  make[1]: *** Waiting for unfinished jobs....
    UPD     include/config/kernel.release
  make[1]: *** wait: No child processes.  Stop.
  Makefile:146: recipe for target 'sub-make' failed
  make: *** [sub-make] Error 2

The cause of the problem is the use of '$(MAKE) KBUILD_SRC=',
which recurses to the top Makefile via the $(objtree)/Makefile
generated by scripts/mkmakefile.

When you run "make -j<N> O=<builddir> ARCH=um", Make can execute
'archheaders' and 'outputmakefile' targets simultaneously because
there is no dependency between them.

If it happens,

  $(Q)$(MAKE) KBUILD_SRC= ARCH=$(HEADER_ARCH) archheaders

... tries to run $(objtree)/Makefile that is being updated.

The correct way for the recursion is

  $(Q)$(MAKE) -f $(srctree)/Makefile ARCH=$(HEADER_ARCH) archheaders

..., which does not rely on the generated Makefile.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Richard Weinberger <richard@nod.at>
2018-08-07 21:30:15 +09:00
Christoph Hellwig 87a4c37599 kconfig: include kernel/Kconfig.preempt from init/Kconfig
Almost all architectures include it.  Add a ARCH_NO_PREEMPT symbol to
disable preempt support for alpha, hexagon, non-coldfire m68k and
user mode Linux.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-02 08:06:54 +09:00
Christoph Hellwig 06ec64b84c Kconfig: consolidate the "Kernel hacking" menu
Move the source of lib/Kconfig.debug and arch/$(ARCH)/Kconfig.debug to
the top-level Kconfig.  For two architectures that means moving their
arch-specific symbols in that menu into a new arch Kconfig.debug file,
and for a few more creating a dummy file so that we can include it
unconditionally.

Also move the actual 'Kernel hacking' menu to lib/Kconfig.debug, where
it belongs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-02 08:06:48 +09:00
Christoph Hellwig 1572497cb0 kconfig: include common Kconfig files from top-level Kconfig
Instead of duplicating the source statements in every architecture just
do it once in the toplevel Kconfig file.

Note that with this the inclusion of arch/$(SRCARCH/Kconfig moves out of
the top-level Kconfig into arch/Kconfig so that don't violate ordering
constraits while keeping a sensible menu structure.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-02 08:03:23 +09:00
Christoph Hellwig 9bea18010f um: create a proper drivers Kconfig
Merge arch/um/Kconfig.char and arch/um/Kconfig.net into a new
arch/um/drivers/Kconfig.  This fits the way Kconfig files are placed
elsewhere in the kernel tree.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-02 08:03:23 +09:00
Christoph Hellwig f163977d21 um: cleanup Kconfig files
We can handle all not architecture specific UM configuration directly in
the newly added arch/um/Kconfig.  Do so by merging the Kconfig.common,
Kconfig.rest and Kconfig.um files into arch/um/Kconfig, and move the main
UML menu as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-02 08:03:23 +09:00
Christoph Hellwig 79b05c1f31 um: stop abusing KBUILD_KCONFIG
Instead create a arch/um/Kconfig file that just includes the actual
per-arch Kconfig file.  Note that we use HEADER_ARCH to find the
per-arch Kconfig file as that variable already includes the
normalization from i386 or x86_64 to x86.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-02 08:03:23 +09:00
Masahiro Yamada 43fee2b238 kbuild: do not redirect the first prerequisite for filechk
Currently, filechk unconditionally opens the first prerequisite and
redirects it as the stdin of a filechk_* rule.  Hence, every target
using $(call filechk,...) must list something as the first prerequisite
even if it is unneeded.

'< $<' is actually unneeded in most cases.  Each rule can explicitly
adds it if necessary.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-28 10:34:10 +09:00
Masahiro Yamada 2fb9279f2c kbuild: change ld_flags to contain LDFLAGS_$(@F)
Put $(LDFLAGS_$(@F)) into ld_flags so that $(LDFLAGS_pcap.o) and
$(LDFLAGS_vde.o) in arch/um/drivers/Makefile are absorbed.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
2018-07-19 08:40:27 +09:00
Linus Torvalds 5e7b9212a4 Solve a series of broken links for files under Documentation:
- can.rst: fix a footnote reference;
 - crypto_engine.rst: Fix two parsing warnings;
 - Fix a lot of broken references to Documentation/*;
 - Improves the scripts/documentation-file-ref-check script,
   in order to help detecting/fixing broken references,
   preventing false-positives.
 
 After this patch series, only 33 broken references to doc files are
 detected by scripts/documentation-file-ref-check.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJbJC2aAAoJEAhfPr2O5OEVPmMP/2rN5m9LZ048oRWlg4hCwo73
 4FpWqDg18hbWCMHXYHIN1UACIMUkIUfgLhF7WE3D/XqRMuxHoiE5u7DUdak7+VNt
 wunpksKFJbgyfFMHRvykHcZV+jQFVbM7eFvXVPIvoSaAeGH6zx4imHTyeDn3x/nL
 gdtBqM4bvEhmBjotBTRR4PB8+oPrT/HIT5npHepx3UnFFFAzDQGEZ/I67/el2G5C
 pVmYdBXvr7iqrvUs6FilHLTEfe1quCI4UaKNfLHKrxXrTkiJQFOwugYuobZfNmxT
 GwjWzfpNy9HMlKJFYipcByALxel1Mnpqz5mIxFQaCTygBuEsORCWzW5MoKIsIUJ0
 KOoG76v0rUyMvLBRvaoao3CHYHdzxhQbtVV9DjyDuDksa2G5IoCAF1t6DyIOitRw
 9plMnGckk+FJ/MXJKYWXHszFS8NhI0SF2zHe3s1DmRTD8P6oxkxvxBFz6iqqADmL
 W6XHd8CcqJItaS9ctPen91TFuysN1HFpdzLLY+xwWmmKOcWC/jFjhTm8pj7xLQHM
 5yuuEcefsajf+Xk4w2fSQmRfXnuq+oOlPuWpwSvEy+59cHGI0ms18P1nHy/yt3II
 CJywwdx6fjwDon57RFKH7kkGd7px317zMqWdIv9gUj/qZAy9gcdLdvEQLhx9u0aV
 4F+hLKFDFEpf58xqRT1R
 =/ozx
 -----END PGP SIGNATURE-----

Merge tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental

Pull documentation fixes from Mauro Carvalho Chehab:
 "This solves a series of broken links for files under Documentation,
  and improves a script meant to detect such broken links (see
  scripts/documentation-file-ref-check).

  The changes on this series are:

   - can.rst: fix a footnote reference;

   - crypto_engine.rst: Fix two parsing warnings;

   - Fix a lot of broken references to Documentation/*;

   - improve the scripts/documentation-file-ref-check script, in order
     to help detecting/fixing broken references, preventing
     false-positives.

  After this patch series, only 33 broken references to doc files are
  detected by scripts/documentation-file-ref-check"

* tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental: (26 commits)
  fix a series of Documentation/ broken file name references
  Documentation: rstFlatTable.py: fix a broken reference
  ABI: sysfs-devices-system-cpu: remove a broken reference
  devicetree: fix a series of wrong file references
  devicetree: fix name of pinctrl-bindings.txt
  devicetree: fix some bindings file names
  MAINTAINERS: fix location of DT npcm files
  MAINTAINERS: fix location of some display DT bindings
  kernel-parameters.txt: fix pointers to sound parameters
  bindings: nvmem/zii: Fix location of nvmem.txt
  docs: Fix more broken references
  scripts/documentation-file-ref-check: check tools/*/Documentation
  scripts/documentation-file-ref-check: get rid of false-positives
  scripts/documentation-file-ref-check: hint: dash or underline
  scripts/documentation-file-ref-check: add a fix logic for DT
  scripts/documentation-file-ref-check: accept more wildcards at filenames
  scripts/documentation-file-ref-check: fix help message
  media: max2175: fix location of driver's companion documentation
  media: v4l: fix broken video4linux docs locations
  media: dvb: point to the location of the old README.dvb-usb file
  ...
2018-06-17 05:25:18 +09:00
Linus Torvalds 8d1e5133bf Merge branch 'for-linus-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull uml updates from Richard Weinberger:
 "Minor updates for UML:

   - fixes for our new vector network driver by Anton

   - initcall cleanup by Alexander

   - We have a new mailinglist, sourceforge.net sucks"

* 'for-linus-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Fix raw interface options
  um: Fix initialization of vector queues
  um: remove uml initcalls
  um: Update mailing list address
2018-06-16 06:50:51 +09:00
Mauro Carvalho Chehab 5fb94e9ca3 docs: Fix some broken references
As we move stuff around, some doc references are broken. Fix some of
them via this script:
	./scripts/documentation-file-ref-check --fix

Manually checked if the produced result is valid, removing a few
false-positives.

Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-06-15 18:10:01 -03:00
Kees Cook 6da2ec5605 treewide: kmalloc() -> kmalloc_array()
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:

        kmalloc(a * b, gfp)

with:
        kmalloc_array(a * b, gfp)

as well as handling cases of:

        kmalloc(a * b * c, gfp)

with:

        kmalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kmalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kmalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kmalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kmalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kmalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kmalloc
+ kmalloc_array
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kmalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kmalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kmalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kmalloc(sizeof(THING) * C2, ...)
|
  kmalloc(sizeof(TYPE) * C2, ...)
|
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Anton Ivanov 5ec9121195 um: Fix raw interface options
Raw interface initialization needs QDISC_BYPASS. Otherwise
it sees its own packets when transmitting.

Fixes: 49da7e64f3 ("High Performance UML Vector Network Driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-10 22:54:47 +02:00
Anton Ivanov 4579a1ba69 um: Fix initialization of vector queues
UML vector drivers could derefence uninitialized memory
when cleaning up after a queue allocation failure.

Fixes: 49da7e64f3 ("High Performance UML Vector Network Driver")
Cc: <stable@vger.kernel.org>
Reported-by: Dan Capenter <dan.carpenter@oracle.com>
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-10 22:50:13 +02:00
Alexander Pateenok cca76c1ad6 um: remove uml initcalls
__uml_initcall() is not used and .uml.initcall.init section is empty:

$ grep -r '__uml_initcall('
arch/um/include/shared/init.h:#define __uml_initcall(fn)	\
$ readelf -s ../umobj/linux | grep __uml_initcall
 23214: 00000000603b75d8     0 NOTYPE  GLOBAL DEFAULT   32 __uml_initcall_start
 25337: 00000000603b75d8     0 NOTYPE  GLOBAL DEFAULT   32 __uml_initcall_end

So it is unnecessary.

Signed-off-by: Alexander Pateenok <pateenoc@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-10 22:49:14 +02:00
Willem de Bruijn fd3a886258 net: in virtio_net_hdr only add VLAN_HLEN to csum_start if payload holds vlan
Tun, tap, virtio, packet and uml vector all use struct virtio_net_hdr
to communicate packet metadata to userspace.

For skbuffs with vlan, the first two return the packet as it may have
existed on the wire, inserting the VLAN tag in the user buffer.  Then
virtio_net_hdr.csum_start needs to be adjusted by VLAN_HLEN bytes.

Commit f09e2249c4 ("macvtap: restore vlan header on user read")
added this feature to macvtap. Commit 3ce9b20f19 ("macvtap: Fix
csum_start when VLAN tags are present") then fixed up csum_start.

Virtio, packet and uml do not insert the vlan header in the user
buffer.

When introducing virtio_net_hdr_from_skb to deduplicate filling in
the virtio_net_hdr, the variant from macvtap which adds VLAN_HLEN was
applied uniformly, breaking csum offset for packets with vlan on
virtio and packet.

Make insertion of VLAN_HLEN optional. Convert the callers to pass it
when needed.

Fixes: e858fae2b0 ("virtio_net: use common code for virtio_net_hdr and skb GSO conversion")
Fixes: 1276f24eee ("packet: use common code for virtio_net_hdr and skb GSO conversion")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-07 16:15:38 -04:00
Linus Torvalds 0ad39cb3d7 Kconfig updates for v4.18
Kconfig now supports new functionality to perform textual substitution.
 It has been a while since Linus suggested to move compiler option tests
 from makefiles to Kconfig. Finally, here it is. The implementation has
 been generalized into a Make-like macro language. Some built-in functions
 such as 'shell' are provided. Variables and user-defined functions are
 also supported so that 'cc-option', 'ld-option', etc. are implemented as
 macros.
 
 Summary:
 
 - refactor package checks for building {m,n,q,g}conf
 
 - remove unused/unmaintained localization support
 
 - remove Kbuild cache
 
 - drop CONFIG_CROSS_COMPILE support
 
 - replace 'option env=' with direct variable expansion
 
 - add built-in functions such as 'shell'
 
 - support variables and user-defined functions
 
 - add helper macros as as 'cc-option'
 
 - add unit tests and a document of the new macro language
 
 - add 'testconfig' to help
 
 - fix warnings from GCC 8.1
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbGBJPAAoJED2LAQed4NsG9QEP/24saP6Q3uF68yOsXcyE7yL0
 VW6acNpCXFjyQZQuHB9JntD9oftSfPuY73mjVKPRvL29NopbFbe7O7wAOYSRvsZT
 cTZ5KF0FpG0enP6qUUiVpGZPGiSXKu21Lr/WrCdS889O2g5NxCB6OameQLjXkz5P
 EZb+QZD6drzYkXjipLJoliFJAhsbaACxmuCgO1gpg+qAEOm/fCnRk1qVwKffH21Z
 YlKMpw0FR3IdZA/cYp5Bh/WiICaCXs8lmMupHb4BHL4SvJGXxMEnuyt1txXANJcv
 3nTxsMPwjdCGboEgCavbcUnTaONnFK6IdGhdSntsf1aKRqHntiA/cwqmJl2RX/6v
 ObX85dRjvyKq+qh9wEGvUle0LQYxhvJJ4NyWX5+wiRB6wzPCuqTPL0I1y6UPwAkQ
 JveUswQ7u3+dCBwuHeXFHWvpviNFkWO+Gc8E2h1PKroG0Tz3HpoQclvcZjsOXrRt
 HX2+6EsuYK2LnabwQzk4TRkI7JnTKpLGG/YoM4H360bNHs5KUwgm6g5V9Oo4L3E+
 A5Jbow5siKtn7lIR9TXDou6O6F7L+bMiK+PlydPiv085EqUfhP+rkiJu9sb18GPD
 dsMXeTN51cJYLtDNiZ9tnPBtTB6Wvk7K1Dcmf3/t3rWVy35tjgl0RdxEySU153Pk
 n62ftyGGyUldBSzWcGWR
 =o37+
 -----END PGP SIGNATURE-----

Merge tag 'kconfig-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kconfig updates from Masahiro Yamada:
 "Kconfig now supports new functionality to perform textual
  substitution. It has been a while since Linus suggested to move
  compiler option tests from makefiles to Kconfig. Finally, here it is.

  The implementation has been generalized into a Make-like macro
  language.

  Some built-in functions such as 'shell' are provided. Variables and
  user-defined functions are also supported so that 'cc-option',
  'ld-option', etc. are implemented as macros.

  Summary:

   - refactor package checks for building {m,n,q,g}conf

   - remove unused/unmaintained localization support

   - remove Kbuild cache

   - drop CONFIG_CROSS_COMPILE support

   - replace 'option env=' with direct variable expansion

   - add built-in functions such as 'shell'

   - support variables and user-defined functions

   - add helper macros as as 'cc-option'

   - add unit tests and a document of the new macro language

   - add 'testconfig' to help

   - fix warnings from GCC 8.1"

* tag 'kconfig-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
  kconfig: Avoid format overflow warning from GCC 8.1
  kbuild: Move last word of nconfig help to the previous line
  kconfig: Add testconfig into make help output
  kconfig: add basic helper macros to scripts/Kconfig.include
  kconfig: show compiler version text in the top comment
  kconfig: test: add Kconfig macro language tests
  Documentation: kconfig: document a new Kconfig macro language
  kconfig: error out if a recursive variable references itself
  kconfig: add 'filename' and 'lineno' built-in variables
  kconfig: add 'info', 'warning-if', and 'error-if' built-in functions
  kconfig: expand lefthand side of assignment statement
  kconfig: support append assignment operator
  kconfig: support simply expanded variable
  kconfig: support user-defined function and recursively expanded variable
  kconfig: begin PARAM state only when seeing a command keyword
  kconfig: replace $(UNAME_RELEASE) with function call
  kconfig: add 'shell' built-in function
  kconfig: add built-in function support
  kconfig: make default prompt of mainmenu less specific
  kconfig: remove sym_expand_string_value()
  ...
2018-06-06 11:31:45 -07:00
Linus Torvalds 0bbcce5d1e Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timers and timekeeping updates from Thomas Gleixner:

 - Core infrastucture work for Y2038 to address the COMPAT interfaces:

     + Add a new Y2038 safe __kernel_timespec and use it in the core
       code

     + Introduce config switches which allow to control the various
       compat mechanisms

     + Use the new config switch in the posix timer code to control the
       32bit compat syscall implementation.

 - Prevent bogus selection of CPU local clocksources which causes an
   endless reselection loop

 - Remove the extra kthread in the clocksource code which has no value
   and just adds another level of indirection

 - The usual bunch of trivial updates, cleanups and fixlets all over the
   place

 - More SPDX conversions

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  clocksource/drivers/mxs_timer: Switch to SPDX identifier
  clocksource/drivers/timer-imx-tpm: Switch to SPDX identifier
  clocksource/drivers/timer-imx-gpt: Switch to SPDX identifier
  clocksource/drivers/timer-imx-gpt: Remove outdated file path
  clocksource/drivers/arc_timer: Add comments about locking while read GFRC
  clocksource/drivers/mips-gic-timer: Add pr_fmt and reword pr_* messages
  clocksource/drivers/sprd: Fix Kconfig dependency
  clocksource: Move inline keyword to the beginning of function declarations
  timer_list: Remove unused function pointer typedef
  timers: Adjust a kernel-doc comment
  tick: Prefer a lower rating device only if it's CPU local device
  clocksource: Remove kthread
  time: Change nanosleep to safe __kernel_* types
  time: Change types to new y2038 safe __kernel_* types
  time: Fix get_timespec64() for y2038 safe compat interfaces
  time: Add new y2038 safe __kernel_timespec
  posix-timers: Make compat syscalls depend on CONFIG_COMPAT_32BIT_TIME
  time: Introduce CONFIG_COMPAT_32BIT_TIME
  time: Introduce CONFIG_64BIT_TIME in architectures
  compat: Enable compat_get/put_timespec64 always
  ...
2018-06-04 20:27:54 -07:00
Linus Torvalds 93e95fa574 Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo updates from Eric Biederman:
 "This set of changes close the known issues with setting si_code to an
  invalid value, and with not fully initializing struct siginfo. There
  remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64
  and x86 to get the code that generates siginfo into a simpler and more
  maintainable state. Most of that work involves refactoring the signal
  handling code and thus careful code review.

  Also not included is the work to shrink the in kernel version of
  struct siginfo. That depends on getting the number of places that
  directly manipulate struct siginfo under control, as it requires the
  introduction of struct kernel_siginfo for the in kernel things.

  Overall this set of changes looks like it is making good progress, and
  with a little luck I will be wrapping up the siginfo work next
  development cycle"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
  signal/sh: Stop gcc warning about an impossible case in do_divide_error
  signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions
  signal/um: More carefully relay signals in relay_signal.
  signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR}
  signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code
  signal/signalfd: Add support for SIGSYS
  signal/signalfd: Remove __put_user from signalfd_copyinfo
  signal/xtensa: Use force_sig_fault where appropriate
  signal/xtensa: Consistenly use SIGBUS in do_unaligned_user
  signal/um: Use force_sig_fault where appropriate
  signal/sparc: Use force_sig_fault where appropriate
  signal/sparc: Use send_sig_fault where appropriate
  signal/sh: Use force_sig_fault where appropriate
  signal/s390: Use force_sig_fault where appropriate
  signal/riscv: Replace do_trap_siginfo with force_sig_fault
  signal/riscv: Use force_sig_fault where appropriate
  signal/parisc: Use force_sig_fault where appropriate
  signal/parisc: Use force_sig_mceerr where appropriate
  signal/openrisc: Use force_sig_fault where appropriate
  signal/nios2: Use force_sig_fault where appropriate
  ...
2018-06-04 15:23:48 -07:00
Masahiro Yamada 104daea149 kconfig: reference environment variables directly and remove 'option env='
To get access to environment variables, Kconfig needs to define a
symbol using "option env=" syntax.  It is tedious to add a symbol entry
for each environment variable given that we need to define much more
such as 'CC', 'AS', 'srctree' etc. to evaluate the compiler capability
in Kconfig.

Adding '$' for symbol references is grammatically inconsistent.
Looking at the code, the symbols prefixed with 'S' are expanded by:
 - conf_expand_value()
   This is used to expand 'arch/$ARCH/defconfig' and 'defconfig_list'
 - sym_expand_string_value()
   This is used to expand strings in 'source' and 'mainmenu'

All of them are fixed values independent of user configuration.  So,
they can be changed into the direct expansion instead of symbols.

This change makes the code much cleaner.  The bounce symbols 'SRCARCH',
'ARCH', 'SUBARCH', 'KERNELVERSION' are gone.

sym_init() hard-coding 'UNAME_RELEASE' is also gone.  'UNAME_RELEASE'
should be replaced with an environment variable.

ARCH_DEFCONFIG is a normal symbol, so it should be simply referenced
without '$' prefix.

The new syntax is addicted by Make.  The variable reference needs
parentheses, like $(FOO), but you can omit them for single-letter
variables, like $F.  Yet, in Makefiles, people tend to use the
parenthetical form for consistency / clarification.

At this moment, only the environment variable is supported, but I will
extend the concept of 'variable' later on.

The variables are expanded in the lexer so we can simplify the token
handling on the parser side.

For example, the following code works.

[Example code]

  config MY_TOOLCHAIN_LIST
          string
          default "My tools: CC=$(CC), AS=$(AS), CPP=$(CPP)"

[Result]

  $ make -s alldefconfig && tail -n 1 .config
  CONFIG_MY_TOOLCHAIN_LIST="My tools: CC=gcc, AS=as, CPP=gcc -E"

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
2018-05-29 03:28:58 +09:00
Christoph Hellwig 3f3942aca6 proc: introduce proc_create_single{,_data}
Variants of proc_create{,_data} that directly take a seq_file show
callback and drastically reduces the boilerplate code in the callers.

All trivial callers converted over.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-16 07:23:35 +02:00
Eric W. Biederman 530621b79f signal/um: More carefully relay signals in relay_signal.
There is a bug in relay signal.  It assumes that when a signal is
relayed the signal never uses a signal independent si_code, such
as SI_USER, SI_KERNEL, SI_QUEUE, ... SI_SIGIO etc.  In practice
siginfo was assuming it was relaying a signal with the SIL_FAULT
layout.  As that is the common cases for the signals it supported
that is a reasonable assumption.

Further user mode linux must be very careful when relaying different
kinds of signals to prevent an information leak.  This means simply
increasing the kinds of signals that are handled in relay_signal
is non-trivial.

Therefore use siginfo_layout and force_sig_fault to simplify
the signal relaying in relay_signal.

By taking advantage of the fact that user mode linux only works
on x86 and x86_64 we can assume that si_trapno can be ignored,
and that si_errno is always zero.

For the signals SIGLL, SIGFPE, SIGSEGV, SIGBUS, and SIGTRAP the only
fault handler I know of that sets si_errno is SIGTRAP TRAP_HWBKPT on a
few oddball architectures.  Those architectures have been modified to
use force_sig_ptrace_errno_trap.

Similarly only a few architectures set __ARCH_SI_TRAPNO.

At the point uml supports those architectures again these additional
cases can be examined and supported if desired in relay_signal.

Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@kot-begemot.co.uk>
Cc: Martin Pärtel <martin.partel@gmail.com>
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: linux-um@lists.infradead.org
Fixes: d3c1cfcdb4 ("um: pass siginfo to guest process")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-28 08:46:49 -05:00
Eric W. Biederman bc08c0781d signal/um: Use force_sig_fault where appropriate
Filling in struct siginfo before calling force_sig_info a tedious and
error prone process, where once in a great while the wrong fields
are filled out, and siginfo has been inconsistently cleared.

Simplify this process by using the helper force_sig_fault.  Which
takes as a parameters all of the information it needs, ensures
all of the fiddly bits of filling in struct siginfo are done properly
and then calls force_sig_info.

In short about a 5 line reduction in code for every time force_sig_info
is called, which makes the calling function clearer.

Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: linux-um@lists.infradead.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 10:44:11 -05:00
Eric W. Biederman 3eb0f5193b signal: Ensure every siginfo we send has all bits initialized
Call clear_siginfo to ensure every stack allocated siginfo is properly
initialized before being passed to the signal sending functions.

Note: It is not safe to depend on C initializers to initialize struct
siginfo on the stack because C is allowed to skip holes when
initializing a structure.

The initialization of struct siginfo in tracehook_report_syscall_exit
was moved from the helper user_single_step_siginfo into
tracehook_report_syscall_exit itself, to make it clear that the local
variable siginfo gets fully initialized.

In a few cases the scope of struct siginfo has been reduced to make it
clear that siginfo siginfo is not used on other paths in the function
in which it is declared.

Instances of using memset to initialize siginfo have been replaced
with calls clear_siginfo for clarity.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 10:40:51 -05:00
Arnd Bergmann 2b5a9a37e9 time: Add an asm-generic/compat.h file
We have a couple of files that try to include asm/compat.h on
architectures where this is available. Those should generally use the
higher-level linux/compat.h file, but that in turn fails to include
asm/compat.h when CONFIG_COMPAT is disabled, unless we can provide
that header on all architectures.

This adds the asm/compat.h for all remaining architectures to
simplify the dependencies.

Architectures that are getting removed in linux-4.17 are not changed
here, to avoid needless conflicts with the removal patches. Those
architectures are broken by this patch, but we have already shown
that they have no users.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-04-19 13:28:51 +02:00
Linus Torvalds 375479c386 Merge git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:

 - a new and faster epoll based IRQ controller and NIC driver

 - misc fixes and janitorial updates

* git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  Fix vector raw inintialization logic
  Migrate vector timers to new timer API
  um: Compile with modern headers
  um: vector: Fix an error handling path in 'vector_parse()'
  um: vector: Fix a memory allocation check
  um: vector: fix missing unlock on error in vector_net_open()
  um: Add missing EXPORT for free_irq_by_fd()
  High Performance UML Vector Network Driver
  Epoll based IRQ controller
  um: Use POSIX ucontext_t instead of struct ucontext
  um: time: Use timespec64 for persistent clock
  um: Restore symbol versions for __memcpy and memcpy
2018-04-11 16:36:47 -07:00
Dominik Brodowski a90f590a1b mm: add ksys_mmap_pgoff() helper; remove in-kernel calls to sys_mmap_pgoff()
Using this helper allows us to avoid the in-kernel calls to the
sys_mmap_pgoff() syscall. The ksys_ prefix denotes that this function is
meant as a drop-in replacement for the syscall. In particular, it uses the
same calling convention as sys_mmap_pgoff().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:16:11 +02:00
Anton Ivanov e40238dedb Fix vector raw inintialization logic
Vector RAW in UML needs to BPF filter its own MAC only
if QDISC_BYPASS has failed. If QDISC_BYPASS is successful, the
frames originated locally are not visible to readers on the
raw socket.

Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-03-29 22:18:02 +02:00
Anton Ivanov ce471fdbc6 Migrate vector timers to new timer API
The patches for the UML vector drivers were in-flight when
the timer changes happened and were not covered by them.

This change migrates vector_kern.c to use the new timer API.

Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-03-29 22:16:34 +02:00
Jason A. Donenfeld 530ba6c7cb um: Compile with modern headers
Recent libcs have gotten a bit more strict, so we actually need to
include the right headers and use the right types. This enables UML to
compile again.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-03-29 22:15:12 +02:00
Christophe JAILLET 584bfe6354 um: vector: Fix an error handling path in 'vector_parse()'
If 'find_device()' finds something, we set '*error_out' and we should
return an error. However, 'err' is known to be 0 at this point.

Explicitly return -EINVAL instead.

While at it, remove the initialization of 'err' at the beginning of the
function and also explicitly return an error code if the first check
fails.

Fixes: ad1f62ab2bd4 ("High Performance UML Vector Network Driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-02-19 19:38:51 +01:00
Christophe JAILLET be967f7da5 um: vector: Fix a memory allocation check
Checking the result of the previous 'kstrdup()' call is expected here, so
we should test 'params' and not 'str' (which is known to be non-NULL at
this point)

Fixes: ad1f62ab2bd4 ("High Performance UML Vector Network Driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-02-19 19:38:51 +01:00
Wei Yongjun 9f3199bcef um: vector: fix missing unlock on error in vector_net_open()
Add the missing unlock before return from function vector_net_open()
in the error handling case.

Fixes: ad1f62ab2bd4 ("High Performance UML Vector Network Driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-02-19 19:38:51 +01:00
Anton Ivanov f16685014e um: Add missing EXPORT for free_irq_by_fd()
Fixes:
ERROR: "free_irq_by_fd" [arch/um/drivers/random.ko] undefined!

Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-02-19 19:38:51 +01:00
Anton Ivanov 49da7e64f3 High Performance UML Vector Network Driver
1. Provides infrastructure for vector IO using recvmmsg/sendmmsg.
    1.1. Multi-message read.
    1.2. Multi-message write.
    1.3. Optimized queue support for multi-packet enqueue/dequeue.
    1.4. BQL/DQL support.
2. Implements transports for several transports as well support
for direct wiring of PWEs to NIC. Allows direct connection of VMs
to host, other VMs and network devices with no switch in use.
    2.1. Raw socket >4 times higher PPS and 10 times higher tcp RX
    than existing pcap based transport (> 4Gbit)
    2.2. New tap transport using socket RX and tap xmit. Similar
    performance improvements (>4Gbit)
    2.3. GRE transport - direct wiring to GRE PWE
    2.4. L2TPv3 transport - direct wiring to L2TPv3 PWE
3. Tuning, performance and offload related setting support via ethtool.
4. Initial BPF support - used in tap/raw to avoid software looping
5. Scatter Gather support.
6. VNET and checksum offload support for raw socket transport.
7. TSO/GSO support where applicable or available
8. Migrates all error messages to netdevice_*() and rate limits
them where needed.

Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-02-19 19:38:51 +01:00
Anton Ivanov ff6a17989c Epoll based IRQ controller
1. Removes the need to walk the IRQ/Device list to determine
who triggered the IRQ.
2. Improves scalability (up to several times performance
improvement for cases with 10s of devices).
3. Improves UML baseline IO performance for one disk + one NIC
use case by up to 10%.
4. Introduces write poll triggered IRQs.
5. Prerequisite for introducing high performance mmesg family
of functions in network IO.
6. Fixes RNG shutdown which was leaking a file descriptor

Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-02-19 19:38:51 +01:00
Krzysztof Mazur 4d1a535b8e um: Use POSIX ucontext_t instead of struct ucontext
glibc 2.26 removed the 'struct ucontext' to "improve" POSIX compliance
and break programs, including User Mode Linux. Fix User Mode Linux
by using POSIX ucontext_t.

This fixes:

arch/um/os-Linux/signal.c: In function 'hard_handler':
arch/um/os-Linux/signal.c:163:22: error: dereferencing pointer to incomplete type 'struct ucontext'
  mcontext_t *mc = &uc->uc_mcontext;
arch/x86/um/stub_segv.c: In function 'stub_segv_handler':
arch/x86/um/stub_segv.c:16:13: error: dereferencing pointer to incomplete type 'struct ucontext'
          &uc->uc_mcontext);

Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-02-19 19:38:51 +01:00
Arnd Bergmann 288fb3d568 um: time: Use timespec64 for persistent clock
This read_persistent_clock() implementation is the only remaining
caller of set_normalized_timespec(). Using read_persistent_clock64()
and set_normalized_timespec64() instead lets us remove the deprecated
interface in the future and helps make 32-bit arch/um get closer to
working beyond 2038.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-02-19 19:38:51 +01:00
Geert Uytterhoeven cc70bec070 um: Restore symbol versions for __memcpy and memcpy
If CONFIG_MODVERSIONS=y:

    WARNING: EXPORT symbol "__memcpy" [vmlinux] version generation failed, symbol will not be versioned.
    WARNING: EXPORT symbol "memcpy" [vmlinux] version generation failed, symbol will not be versioned.

Add <asm/asm-prototypes.h>, including the generic version, so that
genksyms knows the types of these symbols and can generate CRCs for
them.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
2018-02-19 19:38:51 +01:00
Al Viro 7a501609c2 mconsole_proc(): don't mess with file->f_pos
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-09 19:28:01 -08:00
Linus Torvalds 3879ae653a The core framework has a handful of patches this time around, mostly due
to the clk rate protection support added by Jerome Brunet. This feature
 will allow consumers to lock in a certain rate on the output of a clk so
 that things like audio playback don't hear pops when the clk frequency
 changes due to shared parent clks changing rates. Currently the clk
 API doesn't guarantee the rate of a clk stays at the rate you request
 after clk_set_rate() is called, so this new API will allow drivers
 to express that requirement. Beyond this, the core got some debugfs
 pretty printing patches and a couple minor non-critical fixes.
 
 Looking outside of the core framework diff we have some new driver
 additions and the removal of a legacy TI clk driver. Both of these hit
 high in the dirstat. Also, the removal of the asm-generic/clkdev.h file
 causes small one-liners in all the architecture Kbuild files. Overall, the
 driver diff seems to be the normal stuff that comes all the time to
 fix little problems here and there and to support new hardware.
 
 Core:
  - Clk rate protection
  - Symbolic clk flags in debugfs output
  - Clk registration enabled clks while doing bookkeeping updates
 
 New Drivers:
  - Spreadtrum SC9860
  - HiSilicon hi3660 stub
  - Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS
  - Amlogic Meson-AXG
  - ASPEED BMC
 
 Removed Drivers:
  - TI OMAP 3xxx legacy clk (non-DT) support
  - asm*/clkdev.h got removed (not really a driver)
 
 Updates:
  - Renesas FDP1-0 module clock on R-Car M3-W
  - Renesas LVDS module clock on R-Car V3M
  - Misc fixes to pr_err() prints
  - Qualcomm MSM8916 audio fixes
  - Qualcomm IPQ8074 rounded out support for more peripherals
  - Qualcomm Alpha PLL variants
  - Divider code was using container_of() on bad pointers
  - Allwinner DE2 clks on H3
  - Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED
  - Mediatek clk driver compile test support
  - AT91 PMC clk suspend/resume restoration support
  - PLL issues fixed on si5351
  - Broadcom IProc PLL calculation updates
  - DVFS support for Armada mvebu CPU clks
  - Allwinner fixed post-divider support
  - TI clkctrl fixes and support for newer SoCs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJac5vRAAoJEK0CiJfG5JUlUaIP/Riq0tbApfc4k4GMvSvaieR/
 AwZFIMCxOxO+KGdUsBWj7UUoDfBYmxyknHZkVUA/m+Lm7cRH/YHHMghEceZLaBYW
 zPQmDfkTl/QkwysXZMCw9vg4vO0tt5gWbHljQnvVhxVVTCkIRpaE8Vkktj1RZzpY
 WU/TkvPbVGY3SNm504TRXKWC9KpMTEXVvzqlg6zLDJ/jE7PGzBKtewqMoLDCBH2L
 q6b50BSXDo2Hep0vm6e5xneXKjLNR4kgN4PkbM4Yoi4iWLLbgAu79NfyOvvr/imS
 HxOHRms9tejtyaiR6bQSF0pbLOERZ3QSbMFEbxdxnCTuPEfy3Nw/2W7mNJlhJa8g
 EGLMnLL4WdloL4Z83dAcMrj9OmxYf7Yobf5dMidLrQT5EYuafdj0ParbI8TQpWSB
 eTqaffSUGPE/7xuKouYBcbvocpXXWCcokrP/mEn3OEHXkIeeut1Jd3RmEvsi3gtJ
 pNraJTIpvt4c05rj6yLUOhWfyqlA+fH3p4Fx3rrH1tmKEiG+lrhKoxF26uALZe0V
 OvarhG+LPIE10pCIYlQjZjQVnYLGCxsGAIoK1uz7VYvFPh2T0cxQlzzeqFgrlTyN
 32hMj3LhkQw82FG9xZqjTX1935R35mySRlx63x7HStI1YFief2X9+RHjJR/lofG0
 nC0JWTp5sC/pKf54QBXj
 =bGPp
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The core framework has a handful of patches this time around, mostly
  due to the clk rate protection support added by Jerome Brunet.

  This feature will allow consumers to lock in a certain rate on the
  output of a clk so that things like audio playback don't hear pops
  when the clk frequency changes due to shared parent clks changing
  rates. Currently the clk API doesn't guarantee the rate of a clk stays
  at the rate you request after clk_set_rate() is called, so this new
  API will allow drivers to express that requirement.

  Beyond this, the core got some debugfs pretty printing patches and a
  couple minor non-critical fixes.

  Looking outside of the core framework diff we have some new driver
  additions and the removal of a legacy TI clk driver. Both of these hit
  high in the dirstat. Also, the removal of the asm-generic/clkdev.h
  file causes small one-liners in all the architecture Kbuild files.

  Overall, the driver diff seems to be the normal stuff that comes all
  the time to fix little problems here and there and to support new
  hardware.

  Summary:

  Core:
   - Clk rate protection
   - Symbolic clk flags in debugfs output
   - Clk registration enabled clks while doing bookkeeping updates

  New Drivers:
   - Spreadtrum SC9860
   - HiSilicon hi3660 stub
   - Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS
   - Amlogic Meson-AXG
   - ASPEED BMC

  Removed Drivers:
   - TI OMAP 3xxx legacy clk (non-DT) support
   - asm*/clkdev.h got removed (not really a driver)

  Updates:
   - Renesas FDP1-0 module clock on R-Car M3-W
   - Renesas LVDS module clock on R-Car V3M
   - Misc fixes to pr_err() prints
   - Qualcomm MSM8916 audio fixes
   - Qualcomm IPQ8074 rounded out support for more peripherals
   - Qualcomm Alpha PLL variants
   - Divider code was using container_of() on bad pointers
   - Allwinner DE2 clks on H3
   - Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED
   - Mediatek clk driver compile test support
   - AT91 PMC clk suspend/resume restoration support
   - PLL issues fixed on si5351
   - Broadcom IProc PLL calculation updates
   - DVFS support for Armada mvebu CPU clks
   - Allwinner fixed post-divider support
   - TI clkctrl fixes and support for newer SoCs"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits)
  clk: aspeed: Handle inverse polarity of USB port 1 clock gate
  clk: aspeed: Fix return value check in aspeed_cc_init()
  clk: aspeed: Add reset controller
  clk: aspeed: Register gated clocks
  clk: aspeed: Add platform driver and register PLLs
  clk: aspeed: Register core clocks
  clk: Add clock driver for ASPEED BMC SoCs
  clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built
  clk: fix reentrancy of clk_enable() on UP systems
  clk: meson-axg: fix potential NULL dereference in axg_clkc_probe()
  clk: Simplify debugfs registration
  clk: Fix debugfs_create_*() usage
  clk: Show symbolic clock flags in debugfs
  clk: renesas: r8a7796: Add FDP clock
  clk: Move __clk_{get,put}() into private clk.h API
  clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks
  clk: Improve flags doc for of_clk_detect_critical()
  arch: Remove clkdev.h asm-generic from Kbuild
  clk: sunxi-ng: a83t: Add M divider to TCON1 clock
  clk: Prepare to remove asm-generic/clkdev.h
  ...
2018-02-01 16:56:07 -08:00
Linus Torvalds 168fe32a07 Merge branch 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull poll annotations from Al Viro:
 "This introduces a __bitwise type for POLL### bitmap, and propagates
  the annotations through the tree. Most of that stuff is as simple as
  'make ->poll() instances return __poll_t and do the same to local
  variables used to hold the future return value'.

  Some of the obvious brainos found in process are fixed (e.g. POLLIN
  misspelled as POLL_IN). At that point the amount of sparse warnings is
  low and most of them are for genuine bugs - e.g. ->poll() instance
  deciding to return -EINVAL instead of a bitmap. I hadn't touched those
  in this series - it's large enough as it is.

  Another problem it has caught was eventpoll() ABI mess; select.c and
  eventpoll.c assumed that corresponding POLL### and EPOLL### were
  equal. That's true for some, but not all of them - EPOLL### are
  arch-independent, but POLL### are not.

  The last commit in this series separates userland POLL### values from
  the (now arch-independent) kernel-side ones, converting between them
  in the few places where they are copied to/from userland. AFAICS, this
  is the least disruptive fix preserving poll(2) ABI and making epoll()
  work on all architectures.

  As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
  it will trigger only on what would've triggered EPOLLWRBAND on other
  architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
  at all on sparc. With this patch they should work consistently on all
  architectures"

* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
  make kernel-side POLL... arch-independent
  eventpoll: no need to mask the result of epi_item_poll() again
  eventpoll: constify struct epoll_event pointers
  debugging printk in sg_poll() uses %x to print POLL... bitmap
  annotate poll(2) guts
  9p: untangle ->poll() mess
  ->si_band gets POLL... bitmap stored into a user-visible long field
  ring_buffer_poll_wait() return value used as return value of ->poll()
  the rest of drivers/*: annotate ->poll() instances
  media: annotate ->poll() instances
  fs: annotate ->poll() instances
  ipc, kernel, mm: annotate ->poll() instances
  net: annotate ->poll() instances
  apparmor: annotate ->poll() instances
  tomoyo: annotate ->poll() instances
  sound: annotate ->poll() instances
  acpi: annotate ->poll() instances
  crypto: annotate ->poll() instances
  block: annotate ->poll() instances
  x86: annotate ->poll() instances
  ...
2018-01-30 17:58:07 -08:00
Linus Torvalds d4173023e6 Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo cleanups from Eric Biederman:
 "Long ago when 2.4 was just a testing release copy_siginfo_to_user was
  made to copy individual fields to userspace, possibly for efficiency
  and to ensure initialized values were not copied to userspace.

  Unfortunately the design was complex, it's assumptions unstated, and
  humans are fallible and so while it worked much of the time that
  design failed to ensure unitialized memory is not copied to userspace.

  This set of changes is part of a new design to clean up siginfo and
  simplify things, and hopefully make the siginfo handling robust enough
  that a simple inspection of the code can be made to ensure we don't
  copy any unitializied fields to userspace.

  The design is to unify struct siginfo and struct compat_siginfo into a
  single definition that is shared between all architectures so that
  anyone adding to the set of information shared with struct siginfo can
  see the whole picture. Hopefully ensuring all future si_code
  assignments are arch independent.

  The design is to unify copy_siginfo_to_user32 and
  copy_siginfo_from_user32 so that those function are complete and cope
  with all of the different cases documented in signinfo_layout. I don't
  think there was a single implementation of either of those functions
  that was complete and correct before my changes unified them.

  The design is to introduce a series of helpers including
  force_siginfo_fault that take the values that are needed in struct
  siginfo and build the siginfo structure for their callers. Ensuring
  struct siginfo is built correctly.

  The remaining work for 4.17 (unless someone thinks it is post -rc1
  material) is to push usage of those helpers down into the
  architectures so that architecture specific code will not need to deal
  with the fiddly work of intializing struct siginfo, and then when
  struct siginfo is guaranteed to be fully initialized change copy
  siginfo_to_user into a simple wrapper around copy_to_user.

  Further there is work in progress on the issues that have been
  documented requires arch specific knowledge to sort out.

  The changes below fix or at least document all of the issues that have
  been found with siginfo generation. Then proceed to unify struct
  siginfo the 32 bit helpers that copy siginfo to and from userspace,
  and generally clean up anything that is not arch specific with regards
  to siginfo generation.

  It is a lot but with the unification you can of siginfo you can
  already see the code reduction in the kernel"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (45 commits)
  signal/memory-failure: Use force_sig_mceerr and send_sig_mceerr
  mm/memory_failure: Remove unused trapno from memory_failure
  signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed
  signal/powerpc: Remove unnecessary signal_code parameter of do_send_trap
  signal: Helpers for faults with specialized siginfo layouts
  signal: Add send_sig_fault and force_sig_fault
  signal: Replace memset(info,...) with clear_siginfo for clarity
  signal: Don't use structure initializers for struct siginfo
  signal/arm64: Better isolate the COMPAT_TASK portion of ptrace_hbptriggered
  ptrace: Use copy_siginfo in setsiginfo and getsiginfo
  signal: Unify and correct copy_siginfo_to_user32
  signal: Remove the code to clear siginfo before calling copy_siginfo_from_user32
  signal: Unify and correct copy_siginfo_from_user32
  signal/blackfin: Remove pointless UID16_SIGINFO_COMPAT_NEEDED
  signal/blackfin: Move the blackfin specific si_codes to asm-generic/siginfo.h
  signal/tile: Move the tile specific si_codes to asm-generic/siginfo.h
  signal/frv: Move the frv specific si_codes to asm-generic/siginfo.h
  signal/ia64: Move the ia64 specific si_codes to asm-generic/siginfo.h
  signal/powerpc: Remove redefinition of NSIGTRAP on powerpc
  signal: Move addr_lsb into the _sigfault union for clarity
  ...
2018-01-30 14:18:52 -08:00
Eric W. Biederman 3b10db2b06 signal: Replace memset(info,...) with clear_siginfo for clarity
The function clear_siginfo is just a nice wrapper around memset so
this results in no functional change.  This change makes mistakes
a little more difficult and it makes it clearer what is going on.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-22 19:07:08 -06:00
David Howells 0500871f21 Construct init thread stack in the linker script rather than by union
Construct the init thread stack in the linker script rather than doing it
by means of a union so that ia64's init_task.c can be got rid of.

The following symbols are then made available from INIT_TASK_DATA() linker
script macro:

	init_thread_union
	init_stack

INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the
size of the init stack.  init_thread_union is given its own section so that
it can be placed into the stack space in the right order.  I'm assuming
that the ia64 ordering is correct and that the task_struct is first and the
thread_info second.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Will Deacon <will.deacon@arm.com> (arm64)
Tested-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-09 23:21:02 +00:00