Commit Graph

814 Commits

Author SHA1 Message Date
Masahiro Yamada fd65465b70 kconfig: do not require pkg-config on make {menu,n}config
Meelis Roos reported a {menu,n}config regression:
 "I have libncurses devel package installed in the default system
  location (as do 99%+ on actual developers probably) and in this
  case, pkg-config is useless.  pkg-config is needed only when
  libraries and headers are installed in non-default locations but
  it is bad to require installation of pkg-config on all the machines
  where make menuconfig would be possibly run."

For {menu,n}config, do not use pkg-config if it is not installed.
For {g,x}config, keep checking pkg-config since we really rely on it
for finding the installation paths of the required packages.

Fixes: 4ab3b80159 ("kconfig: check for pkg-config on make {menu,n,g,x}config")
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
2018-09-03 02:13:48 +09:00
Lukas Bulwahn bc8d2e20a3 kconfig: remove a spurious self-assignment
The self assignment was probably introduced by an automated code
refactoring in
commit 694c49a7c0 ("kconfig: drop localization support").

The issue was identified by a self-assign warning when running
make menuconfig with clang.

Fixes: 694c49a7c0 ("kconfig: drop localization support")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-09-01 01:21:42 +09:00
Masahiro Yamada 9a9ddcf478 kconfig: suppress "configuration written to .config" for syncconfig
The top-level Makefile invokes "make syncconfig" when necessary.
Then, Kconfig displays the following message when .config is updated.

  #
  # configuration written to .config
  #

It is distracting because "make syncconfig" happens during the build
stage, and does nothing important in most cases.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-22 23:21:41 +09:00
Masahiro Yamada 98a4afbfaf kconfig: fix "Can't open ..." in parallel build
If you run "make menuconfig" or "make nconfig" with -j<N> option in a
fresh source tree, you will see several "Can't open ..." messages:

  $ make -j8 menuconfig
    HOSTCC  scripts/basic/fixdep
    YACC    scripts/kconfig/zconf.tab.c
    LEX     scripts/kconfig/zconf.lex.c
  /bin/sh: 1: .: Can't open scripts/kconfig/.mconf-cfg
  /bin/sh: 1: .: Can't open scripts/kconfig/.mconf-cfg
  /bin/sh: 1: .: Can't open scripts/kconfig/.mconf-cfg
  /bin/sh: 1: .:   HOSTCC  scripts/kconfig/lxdialog/checklist.o
  Can't open scripts/kconfig/.mconf-cfg
  /bin/sh: 1: .: Can't open scripts/kconfig/.mconf-cfg
  /bin/sh: 1: .: Can't open scripts/kconfig/.mconf-cfg
  /bin/sh: 1: .: Can't open scripts/kconfig/.mconf-cfg
    HOSTCC  scripts/kconfig/lxdialog/inputbox.o
  /bin/sh: 1: .: Can't open scripts/kconfig/.mconf-cfg
  /bin/sh: 1: .: Can't open scripts/kconfig/.mconf-cfg
  /bin/sh: 1: .: Can't open scripts/kconfig/.mconf-cfg
    UPD     scripts/kconfig/.mconf-cfg
  /bin/sh: 1: .: Can't open scripts/kconfig/.mconf-cfg
    HOSTCC  scripts/kconfig/lxdialog/menubox.o
    HOSTCC  scripts/kconfig/lxdialog/textbox.o
    HOSTCC  scripts/kconfig/lxdialog/util.o
    HOSTCC  scripts/kconfig/lxdialog/yesno.o
    HOSTCC  scripts/kconfig/mconf.o
    HOSTCC  scripts/kconfig/zconf.tab.o
    HOSTLD  scripts/kconfig/mconf

Correct dependencies to fix this problem.

Fixes: 1c5af5cf93 ("kconfig: refactor ncurses package checks for building mconf and nconf")
Cc: linux-stable <stable@vger.kernel.org> # v4.18
Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Borislav Petkov <bp@suse.de>
2018-08-22 23:21:41 +09:00
Masahiro Yamada f498926c47 kconfig: improve the recursive dependency report
This commit improves the messages of the recursive dependency.
Currently, sym->dir_dep.expr is not checked.  Hence, any dependency
in property visibility is regarded as the dependency of the symbol.

[Test Code 1]

  config A
          bool "a"
          depends on B

  config B
          bool "b"
          depends on A

[Test Code 2]

  config A
          bool "a" if B

  config B
          bool "b"
          depends on A

For both cases above, the same message is displayed:

        symbol B depends on A
        symbol A depends on B

This commit changes the message for the latter, like this:

        symbol B depends on A
        symbol A prompt is visible depending on B

Also, 'select' and 'imply' are distinguished.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Dirk Gouders <dirk@gouders.net>
2018-08-22 23:21:39 +09:00
Masahiro Yamada 5e8c5299d3 kconfig: report recursive dependency involving 'imply'
Currently, Kconfig does not complain about the recursive dependency
where 'imply' keywords are involved.

[Test Code]

  config A
          bool "a"

  config B
          bool "b"
          imply A
          depends on A

In the code above, Kconfig cannot calculate the symbol values correctly
due to the circular dependency.  For example, allyesconfig followed by
syncconfig results in an odd behavior because CONFIG_B becomes visible
in syncconfig.

  $ make allyesconfig
  scripts/kconfig/conf  --allyesconfig Kconfig
  #
  # configuration written to .config
  #
  $ cat .config
  #
  # Automatically generated file; DO NOT EDIT.
  # Main menu
  #
  CONFIG_A=y
  $ make syncconfig
  scripts/kconfig/conf  --syncconfig Kconfig
  *
  * Restart config...
  *
  *
  * Main menu
  *
  a (A) [Y/n/?] y
    b (B) [N/y/?] (NEW)

To detect this correctly, sym_check_expr_deps() should recurse to
not only sym->rev_dep.expr but also sym->implied.expr .

At this moment, sym_check_print_recursive() cannot distinguish
'select' and 'imply' since it does not know the precise context
where the recursive dependency has been hit.  This will be solved
by the next commit.

In fact, even the document and the unit-test are confused.  Using
'imply' does not solve recursive dependency since 'imply' addresses
the unmet direct dependency, which 'select' could cause.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Dirk Gouders <dirk@gouders.net>
2018-08-22 23:21:39 +09:00
Masahiro Yamada f1575595d1 kconfig: error out when seeing recursive dependency
Originally, recursive dependency was a fatal error for Kconfig
because Kconfig cannot compute symbol values in such a situation.

Commit d595cea624 ("kconfig: print more info when we see a recursive
dependency") changed it to a warning, which I guess was not intentional.

Get it back to an error again.

Also, rename the unit test directory "warn_recursive_dep" to
"err_recursive_dep" so that it matches to the behavior.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Dirk Gouders <dirk@gouders.net>
2018-08-22 23:21:38 +09:00
Randy Dunlap 4bf6a9af0e kconfig: add build-only configurator targets
Add build-only targets for build_menuconfig, build_nconfig,
build_xconfig, and build_gconfig.
(targets must end in "config" to qualify in top-level Makefile)

This allows these target to be built without execution (e.g., to
look for errors or warnings) and/or to be built and checked by sparse.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-22 23:21:37 +09:00
Linus Torvalds 01f0e5cded Kconfig updates for v4.19
- show clearer error messages where pkg-config is needed, but not
   installed
 
 - rename SYMBOL_AUTO to SYMBOL_NO_WRITE to reflect its semantics
 
 - create all necessary directories by Kconfig tool itself instead
   of Makefile
 
 - update the .config unconditionally when syncconfig is invoked
 
 - use 'include' directive instead of '-include' where
   include/config/{auto,tristate}.conf is mandatory
 
 - do not try to update the .config when running install targets
 
 - add .DELETE_ON_ERROR to delete partially updated files
 
 - misc cleanups and fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbdFbBAAoJED2LAQed4NsGJbQP/icdG5Cj8YVuIlqBEe50KkbT
 V0jJdCyxSSUXiuTaGlFJ4RFlcbH9+4JcMdGIHqRrrtW0UpqXNcHgIOjbCaq4zLCw
 oRtva0/VC3KVlNDZR702t58t8os3qS03XuuRd1bBao19Mje7YOtHGrBfaEmZ3TIV
 jn9TX3K8PxPE8NLRuY5P3OT4fEeeUwXbleo5RuReQR8mWY3p6Gf8YjJ/mxDnoSbF
 gnot+ahWKdvJBjAbbTgoFePM7zOp4YA6Z1Nw0OerXKbchLG2D/wyDNbS2AnME3TR
 RSFuEZL3LqkZlVN1q7oQ0kzVuafghcUSx5LiRovejw7ZRemU30ixqSTZ6w6aL3X8
 nvm+arCGPS85v6RiPEnDMI9iXaqA0+yhwdKi3OLhoOEz+Y8G74JkOZErIoVpE2Ok
 wrSrmLzLzx6kcOaL50hhWQ5Jm3SGclFO1+uEcMP2vSRrrUJlkrBRvpLm+BInFVYS
 HnifGBSD73+UIrVmAcEM30YXUX4kFDoLWUd659nop270vr1JZr2/ie+WODH/fsfn
 aSDQq7AUbwybYHcSnzrv/eiZ5xiDBXcfRsvAcjpwzrUzpj6mM95XwBFOk7O/4a5w
 SuXiMSPbf/zemKhVp2wk6/nxS8SI07qEpXYMRcf3JL/kcT0KDg2/sPou//beYC56
 /s3cTXUlMrG7KTTfr0jz
 =/Dow
 -----END PGP SIGNATURE-----

Merge tag 'kconfig-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kconfig updates from Masahiro Yamada:

 - show clearer error messages where pkg-config is needed, but not
   installed

 - rename SYMBOL_AUTO to SYMBOL_NO_WRITE to reflect its semantics

 - create all necessary directories by Kconfig tool itself instead of
   Makefile

 - update the .config unconditionally when syncconfig is invoked

 - use 'include' directive instead of '-include' where
   include/config/{auto,tristate}.conf is mandatory

 - do not try to update the .config when running install targets

 - add .DELETE_ON_ERROR to delete partially updated files

 - misc cleanups and fixes

* tag 'kconfig-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: remove P_ENV property type
  kconfig: remove unused sym_get_env_prop() function
  kconfig: fix the rule of mainmenu_stmt symbol
  init/Kconfig: Use short unix-style option instead of --longname
  Kbuild: Makefile.modbuiltin: include auto.conf and tristate.conf mandatory
  kbuild: remove auto.conf from prerequisite of phony targets
  kbuild: do not update config for 'make kernelrelease'
  kbuild: do not update config when running install targets
  kbuild: add .DELETE_ON_ERROR special target
  kbuild: use 'include' directive to load auto.conf from top Makefile
  kconfig: allow all config targets to write auto.conf if missing
  kconfig: make syncconfig update .config regardless of sym_change_count
  kconfig: create directories needed for syncconfig by itself
  kconfig: remove unneeded directory generation from local*config
  kconfig: split out useful helpers in confdata.c
  kconfig: rename file_write_dep and move it to confdata.c
  kconfig: fix typos in description of "choice" in kconfig-language.txt
  kconfig: handle format string before calling conf_message_callback()
  kconfig: rename SYMBOL_AUTO to SYMBOL_NO_WRITE
  kconfig: check for pkg-config on make {menu,n,g,x}config
2018-08-15 12:50:10 -07:00
Masahiro Yamada 1880861226 kconfig: remove P_ENV property type
This property is not set by anyone since commit 104daea149 ("kconfig:
reference environment variables directly and remove 'option env='").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
2018-08-14 09:01:47 +09:00
Masahiro Yamada c151272d16 kconfig: remove unused sym_get_env_prop() function
This function is unused since commit 104daea149 ("kconfig: reference
environment variables directly and remove 'option env='").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
2018-08-14 08:59:57 +09:00
Masahiro Yamada 56869d45e3 kconfig: fix the rule of mainmenu_stmt symbol
The rule of mainmenu_stmt does not have debug print of zconf_lineno(),
but if it had, it would print a wrong line number for the same reason
as commit b2d00d7c61 ("kconfig: fix line numbers for if-entries in
menu tree").

The mainmenu_stmt does not need to eat following empty lines because
they are reduced to common_stmt.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-13 12:04:51 +09:00
Masahiro Yamada 00c864f890 kconfig: allow all config targets to write auto.conf if missing
Currently, only syncconfig creates or updates include/config/auto.conf
and some other files.  Other config targets create or update only the
.config file.

When you configure and build the kernel from a pristine source tree,
any config target is followed by syncconfig in the build stage since
include/config/auto.conf is missing.

We are moving compiler tests from Makefile to Kconfig.  It means that
parsing Kconfig files will be more costly since Kconfig invokes the
compiler commands internally.  Thus, we want to avoid invoking Kconfig
twice (one for *config to create the .config, and one for syncconfig
to synchronize the auto.conf).  If auto.conf does not exist, we can
generate all configuration files in the first configuration stage,
which will save the syncconfig in the build stage.

Please note this should be done only when auto.conf is missing.  If
*config blindly did this, time stamp files under include/config/ would
be unnecessarily touched, triggering unneeded rebuild of objects.

I assume a scenario like this:

 1. You have a source tree that has already been built
    with CONFIG_FOO disabled

 2. Run "make menuconfig" to enable CONFIG_FOO

 3. CONFIG_FOO turns out to be unnecessary.
    Run "make menuconfig" again to disable CONFIG_FOO

 4. Run "make"

In this case, include/config/foo.h should not be touched since there
is no change in CONFIG_FOO.  The sync process should be delayed until
the user really attempts to build the kernel.

This commit has another motivation; I want to suppress the 'No such
file or directory' warning from the 'include' directive.

The top-level Makefile includes auto.conf with '-include' directive,
like this:

  ifeq ($(dot-config),1)
  -include include/config/auto.conf
  endif

This looks strange because auto.conf is mandatory when dot-config is 1.
I guess only the reason of using '-include' is to suppress the warning
'include/config/auto.conf: No such file or directory' when building
from a clean tree.  However, this has a side-effect; Make considers
the files included by '-include' are optional.  Hence, Make continues
to build even if it fails to generate include/config/auto.conf.  I will
change this in the next commit, but the warning message is annoying.
(At least, kbuild test robot reports it as a regression.)

With this commit, Kconfig will generate all configuration files together
with the .config and I guess it is a solution good enough to suppress
the warning.

Note:
GNU Make 4.2 or later does not display the warning from the 'include'
directive if include files are successfully generated.  See GNU Make
commit 87a5f98d248f ("[SV 102] Don't show unnecessary include file
errors.")  However, older GNU Make versions are still widely used.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25 23:25:30 +09:00
Masahiro Yamada 16952b77d8 kconfig: make syncconfig update .config regardless of sym_change_count
syncconfig updates the .config only when sym_change_count > 0, i.e.
any change in config symbols has been detected.

Not only symbols but also comments are contained in the .config file.
If only comments are updated, they are not fed back to the .config,
then the stale comments are left-over.  Of course, this is just a
matter of comments, but why not fix it.

I see some scenarios where this happens.

Scenario A:

 1. You have a source tree that has already been configured.

 2. Linus increments the version number in the top-level Makefile
    (i.e. he commits a new release)

 3. You pull it, and run 'make'

 4. syncconfig is invoked because the environment variable,
    KERNELVERSION is updated, but the .config is not updated since
    no config symbol is changed.

 5. The .config file contains a kernel version in the top line:

    # Automatically generated file; DO NOT EDIT.
    # Linux/arm64 4.18.0-rc2 Kernel Configuration

    ... which points to a previous version.

Scenario B:

 1. You have a source tree that has already been configured.

 2. You upgrade the compiler, but it still has the same version number.
    This may happen if you regularly build the latest compiler from
    the source code.

 3. You run 'make'

 4. syncconfig is invoked because the environment variable,
    CC_VERSION_TEXT is updated, but the .config is not updated since
    no config symbol is changed.

 5. The .config file contains the version string of the compiler:

    #
    # Compiler: aarch64-linux-gcc (GCC) 9.0.0 20180628 (experimental)
    #

    ... which carries the information of the old compiler.

If KCONFIG_NOSILENTUPDATE is set, syncconfig is not allowed to update
the .config file.  Otherwise, it is fine to update it regardless of
sym_change_count.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25 23:25:30 +09:00
Masahiro Yamada 79123b1389 kconfig: create directories needed for syncconfig by itself
'make syncconfig' creates some files such as include/config/auto.conf,
include/generate/autoconf.h, etc. but the necessary directory creation
relies on scripts/kconfig/Makefile.

To make Kconfig self-contained, create directories as needed in
conf_write_autoconf().

This change allows scripts/kconfig/Makefile cleanups; syncconfig can
be merged into simple-targets.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25 23:25:30 +09:00
Masahiro Yamada adc18acf42 kconfig: remove unneeded directory generation from local*config
Commit 17263baf95 ("kconfig: Create include/generated for
localmodconfig") added the 'mkdir' line because local{yes,mod}config
ran streamline_config.pl followed by silentoldconfig at that time.

Since commit 81d2bc2273 ("kconfig: invoke oldconfig instead of
silentoldconfig from local*config"), no sub-directory is required.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25 23:25:29 +09:00
Masahiro Yamada 0608182ad5 kconfig: split out useful helpers in confdata.c
Split out helpers:
 is_present() - check if the given path exists
 is_dir() - check if the given path exists and it is a directory
 make_parent_dir() - create the parent directories of the given path

These helpers will be reused in later commits.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25 23:25:29 +09:00
Masahiro Yamada a2ff404015 kconfig: rename file_write_dep and move it to confdata.c
file_write_dep() is called only from conf_write_autoconf().
Move it from util.c to confdata.c to make it static.
Also, rename it to conf_write_dep() since it should belong to
the group of conf_write* functions.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25 23:25:28 +09:00
Masahiro Yamada 5accd7f336 kconfig: handle format string before calling conf_message_callback()
As you see in mconf.c and nconf.c, conf_message_callback() hooks are
likely to end up with the boilerplate of vsnprintf().  Process the
string format before calling conf_message_callback() so that it
receives a simple string.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Dirk Gouders <dirk@gouders.net>
2018-07-25 23:24:35 +09:00
Dirk Gouders 693359f7ac kconfig: rename SYMBOL_AUTO to SYMBOL_NO_WRITE
Over time, the use of the flag SYMBOL_AUTO changed from initially
marking three automatically generated symbols ARCH, KERNELRELEASE and
UNAME_RELEASE to today's effect of protecting symbols from being
written out.

Currently, only symbols of type CHOICE and those with option
defconf_list set have that flag set.

Reflect that change in semantics in the flag's name.

Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-18 01:18:09 +09:00
Randy Dunlap 4ab3b80159 kconfig: check for pkg-config on make {menu,n,g,x}config
Each of 'make {menu,n,g,x}config' uses (needs) pkg-config to make sure
that other required files are present and to determine build flags
settings, but none of these check that pkg-config itself is present.
Add a check for all 4 of these targets and update
Documentation/process/changes.rst to mention 'pkg-config'.

Fixes kernel bugzilla #77511:
https://bugzilla.kernel.org/show_bug.cgi?id=77511

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-18 01:18:09 +09:00
Laura Abbott 8377bd2b9e kbuild: Rename HOST_LOADLIBES to KBUILD_HOSTLDLIBS
In preparation for enabling command line LDLIBS, re-name HOST_LOADLIBES
to KBUILD_HOSTLDLIBS as the internal use only flags. Also rename
existing usage to HOSTLDLIBS for consistency. This should not have any
visible effects.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-18 01:18:05 +09:00
Jerry James 73d1c580f9 kconfig: loop boundary condition fix
If buf[-1] just happens to hold the byte 0x0A, then nread can wrap around
to (size_t)-1, leading to invalid memory accesses.

This has caused segmentation faults when trying to build the latest
kernel snapshots for i686 in Fedora:
https://bugzilla.redhat.com/show_bug.cgi?id=1592374

Signed-off-by: Jerry James <loganjerry@gmail.com>
[alexpl@fedoraproject.org: reformatted patch for submission]
Signed-off-by: Alexander Ploumistos <alexpl@fedoraproject.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-28 22:48:08 +09:00
Dirk Gouders ecd53ac2f2 kconfig: handle P_SYMBOL in print_symbol()
Each symbol has a property of type P_SYMBOL since commit
59e89e3ddf (kconfig: save location of config symbols).
Handle those properties in print_symbol().

Further, place a pointer to print_symbol() in the comment above the
list of known property type.

Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-28 22:47:47 +09:00
Dirk Gouders b2d00d7c61 kconfig: fix line numbers for if-entries in menu tree
The line numers for if-entries in the menu tree are off by one or more
lines which is confusing when debugging for correctness of unrelated changes.

According to the git log, commit a02f0570ae (kconfig: improve
error handling in the parser) was the last one that changed that part
of the parser and replaced

	"if_entry: T_IF expr T_EOL"
by
	"if_entry: T_IF expr nl"

but the commit message does not state why this has been done.

When reverting that part of the commit, only the line numers are
corrected (checked with cdebug = DEBUG_PARSE in zconf.y), otherwise
the menu tree remains unchanged (checked with zconfdump() enabled in
conf.c).

An example for the corrected line numbers:

drivers/soc/Kconfig:15:source drivers/soc/tegra/Kconfig
drivers/soc/tegra/Kconfig:4:if
drivers/soc/tegra/Kconfig:6:if

changes to:

drivers/soc/Kconfig:15:source drivers/soc/tegra/Kconfig
drivers/soc/tegra/Kconfig:1:if
drivers/soc/tegra/Kconfig:4:if

Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-25 23:21:14 +09:00
Sam Ravnborg 8593080c0f kconfig: fix localmodconfig
When kconfig syntax moved to use $(FOO) for environment variables
localmodconfig was not updated.
Fix so it now works with the new syntax $(FOO)

Fixes: 104daea149 ("kconfig: reference environment variables directly and remove 'option env='")
Reported-by: Kevin Locke <kevin@kevinlocke.name>
Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Kevin Locke <kevin@kevinlocke.name>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-11 09:16:30 +09:00
Nathan Chancellor 2ae89c7a82 kconfig: Avoid format overflow warning from GCC 8.1
In file included from scripts/kconfig/zconf.tab.c:2485:
scripts/kconfig/confdata.c: In function ‘conf_write’:
scripts/kconfig/confdata.c:773:22: warning: ‘%s’ directive writing likely 7 or more bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
  sprintf(newname, "%s%s", dirname, basename);
                      ^~
scripts/kconfig/confdata.c:773:19: note: assuming directive output of 7 bytes
  sprintf(newname, "%s%s", dirname, basename);
                   ^~~~~~
scripts/kconfig/confdata.c:773:2: note: ‘sprintf’ output 1 or more bytes (assuming 4104) into a destination of size 4097
  sprintf(newname, "%s%s", dirname, basename);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
scripts/kconfig/confdata.c:776:23: warning: ‘.tmpconfig.’ directive writing 11 bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
   sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid());
                       ^~~~~~~~~~~
scripts/kconfig/confdata.c:776:3: note: ‘sprintf’ output between 13 and 4119 bytes into a destination of size 4097
   sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid());
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Increase the size of tmpname and newname to make GCC happy.

Cc: stable@vger.kernel.org
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-05 22:07:21 +09:00
Petr Vorel bb6d83dde1 kbuild: Move last word of nconfig help to the previous line
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-05 22:07:03 +09:00
Petr Vorel d6a0c8a132 kconfig: Add testconfig into make help output
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-05 22:06:32 +09:00
Masahiro Yamada 2bece88f89 kconfig: test: add Kconfig macro language tests
Here are the test cases I used for developing the text expansion
feature.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-29 03:31:19 +09:00
Masahiro Yamada 915f64901e kconfig: error out if a recursive variable references itself
When using a recursively expanded variable, it is a common mistake
to make circular reference.

For example, Make terminates the following code:

  X = $(X)
  Y := $(X)

Let's detect the circular expansion in Kconfig, too.

On the other hand, a function that recurses itself is a commonly-used
programming technique.  So, Make does not check recursion in the
reference with 'call'.  For example, the following code continues
running eternally:

  X = $(call X)
  Y := $(X)

Kconfig allows circular expansion if one or more arguments are given,
but terminates when the same function is recursively invoked 1000 times,
assuming it is a programming mistake.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-29 03:31:19 +09:00
Masahiro Yamada a702a6176e kconfig: add 'filename' and 'lineno' built-in variables
The special variables, $(filename) and $(lineno), are expanded to a
file name and its line number being parsed, respectively.

Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
2018-05-29 03:31:19 +09:00
Masahiro Yamada 1d6272e6fe kconfig: add 'info', 'warning-if', and 'error-if' built-in functions
Syntax:
  $(info,<text>)
  $(warning-if,<condition>,<text>)
  $(error-if,<condition>,<text)

The 'info' function prints a message to stdout as in Make.

The 'warning-if' and 'error-if' are similar to 'warning' and 'error'
in Make, but take the condition parameter.  They are effective only
when the <condition> part is y.

Kconfig does not implement the lazy expansion as used in the 'if'
'and, 'or' functions in Make.  In other words, Kconfig does not
support conditional expansion.  The unconditional 'error' function
would always terminate the parsing, hence would be useless in Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
2018-05-29 03:31:19 +09:00
Masahiro Yamada 82bc8bd82e kconfig: expand lefthand side of assignment statement
Make expands the lefthand side of assignment statements.  In fact,
Kbuild relies on it since kernel makefiles mostly look like this:

  obj-$(CONFIG_FOO) += foo.o

Do likewise in Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-29 03:31:19 +09:00
Masahiro Yamada ed2a22f277 kconfig: support append assignment operator
Support += operator.  This appends a space and the text on the
righthand side to a variable.

The timing of the evaluation of the righthand side depends on the
flavor of the variable.  If the lefthand side was originally defined
as a simple variable, the righthand side is expanded immediately.
Otherwise, the expansion is deferred.  Appending something to an
undefined variable results in a recursive variable.

To implement this, we need to remember the flavor of variables.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-29 03:31:19 +09:00
Masahiro Yamada 1175c02506 kconfig: support simply expanded variable
The previous commit added variable and user-defined function.  They
work similarly in the sense that the evaluation is deferred until
they are used.

This commit adds another type of variable, simply expanded variable,
as we see in Make.

The := operator defines a simply expanded variable, expanding the
righthand side immediately.  This works like traditional programming
language variables.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-29 03:31:19 +09:00
Masahiro Yamada 9ced3bddec kconfig: support user-defined function and recursively expanded variable
Now, we got a basic ability to test compiler capability in Kconfig.

config CC_HAS_STACKPROTECTOR
        def_bool $(shell,($(CC) -Werror -fstack-protector -E -x c /dev/null -o /dev/null 2>/dev/null) && echo y || echo n)

This works, but it is ugly to repeat this long boilerplate.

We want to describe like this:

config CC_HAS_STACKPROTECTOR
        bool
        default $(cc-option,-fstack-protector)

It is straight-forward to add a new function, but I do not like to
hard-code specialized functions like that.  Hence, here is another
feature, user-defined function.  This works as a textual shorthand
with parameterization.

A user-defined function is defined by using the = operator, and can
be referenced in the same way as built-in functions.  A user-defined
function in Make is referenced like $(call my-func,arg1,arg2), but I
omitted the 'call' to make the syntax shorter.

The definition of a user-defined function contains $(1), $(2), etc.
in its body to reference the parameters.  It is grammatically valid
to pass more or fewer arguments when calling it.  We already exploit
this feature in our makefiles; scripts/Kbuild.include defines cc-option
which takes two arguments at most, but most of the callers pass only
one argument.

By the way, a variable is supported as a subset of this feature since
a variable is "a user-defined function with zero argument".  In this
context, I mean "variable" as recursively expanded variable.  I will
add a different flavored variable in the next commit.

The code above can be written as follows:

[Example Code]

  success = $(shell,($(1)) >/dev/null 2>&1 && echo y || echo n)
  cc-option = $(success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null)

  config CC_HAS_STACKPROTECTOR
          def_bool $(cc-option,-fstack-protector)

[Result]
  $ make -s alldefconfig && tail -n 1 .config
  CONFIG_CC_HAS_STACKPROTECTOR=y

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-29 03:31:19 +09:00
Masahiro Yamada 9de071536c kconfig: begin PARAM state only when seeing a command keyword
Currently, any statement line starts with a keyword with TF_COMMAND
flag.  So, the following three lines are dead code.

        alloc_string(yytext, yyleng);
        zconflval.string = text;
        return T_WORD;

If a T_WORD token is returned in this context, it will cause syntax
error in the parser anyway.

The next commit will support the assignment statement where a line
starts with an arbitrary identifier.  So, I want the lexer to switch
to the PARAM state only when it sees a command keyword.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-29 03:31:19 +09:00
Masahiro Yamada 2fd5b09c20 kconfig: add 'shell' built-in function
This accepts a single command to execute.  It returns the standard
output from it.

[Example code]

  config HELLO
          string
          default "$(shell,echo hello world)"

  config Y
          def_bool $(shell,echo y)

[Result]

  $ make -s alldefconfig && tail -n 2 .config
  CONFIG_HELLO="hello world"
  CONFIG_Y=y

Caveat:
Like environments, functions are expanded in the lexer.  You cannot
pass symbols to function arguments.  This is a limitation to simplify
the implementation.  I want to avoid the dynamic function evaluation,
which would introduce much more complexity.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-29 03:31:19 +09:00
Masahiro Yamada e298f3b49d kconfig: add built-in function support
This commit adds a new concept 'function' to do more text processing
in Kconfig.

A function call looks like this:

  $(function,arg1,arg2,arg3,...)

This commit adds the basic infrastructure to expand functions.
Change the text expansion helpers to take arguments.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-29 03:31:19 +09:00
Masahiro Yamada 137c0118a9 kconfig: make default prompt of mainmenu less specific
If "mainmenu" is not specified, "Linux Kernel Configuration" is used
as a default prompt.

Given that Kconfig is used in other projects than Linux, let's use
a more generic prompt, "Main menu".

Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-29 03:31:19 +09:00
Masahiro Yamada 5b31a97467 kconfig: remove sym_expand_string_value()
There is no more caller of sym_expand_string_value().

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
2018-05-29 03:31:19 +09:00
Masahiro Yamada 96d8e48da5 kconfig: remove string expansion for mainmenu after yyparse()
Now that environments are expanded in the lexer, conf_parse() does
not need to expand them explicitly.

The hack introduced by commit 0724a7c32a ("kconfig: Don't leak
main menus during parsing") can go away.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-05-29 03:31:19 +09:00
Masahiro Yamada bb222ceeb3 kconfig: remove string expansion in file_lookup()
There are two callers of file_lookup(), but there is no more reason
to expand the given path.

[1] zconf_initscan()
    This is used to open the first Kconfig.  sym_expand_string_value()
    has never been used in a useful way here; before opening the first
    Kconfig file, obviously there is no symbol to expand.  If you use
    expand_string_value() instead, environments in KBUILD_KCONFIG would
    be expanded, but I do not see practical benefits for that.

[2] zconf_nextfile()
    This is used to open the next file from 'source' statement.
    Symbols in the path like "arch/$SRCARCH/Kconfig" needed expanding,
    but it was replaced with the direct environment expansion.  The
    environment has already been expanded before the token is passed
    to the parser.

By the way, file_lookup() was already buggy; it expanded a given path,
but it used the path before expansion for look-up:
        if (!strcmp(name, file->name)) {

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-05-29 03:28:58 +09:00
Masahiro Yamada 104daea149 kconfig: reference environment variables directly and remove 'option env='
To get access to environment variables, Kconfig needs to define a
symbol using "option env=" syntax.  It is tedious to add a symbol entry
for each environment variable given that we need to define much more
such as 'CC', 'AS', 'srctree' etc. to evaluate the compiler capability
in Kconfig.

Adding '$' for symbol references is grammatically inconsistent.
Looking at the code, the symbols prefixed with 'S' are expanded by:
 - conf_expand_value()
   This is used to expand 'arch/$ARCH/defconfig' and 'defconfig_list'
 - sym_expand_string_value()
   This is used to expand strings in 'source' and 'mainmenu'

All of them are fixed values independent of user configuration.  So,
they can be changed into the direct expansion instead of symbols.

This change makes the code much cleaner.  The bounce symbols 'SRCARCH',
'ARCH', 'SUBARCH', 'KERNELVERSION' are gone.

sym_init() hard-coding 'UNAME_RELEASE' is also gone.  'UNAME_RELEASE'
should be replaced with an environment variable.

ARCH_DEFCONFIG is a normal symbol, so it should be simply referenced
without '$' prefix.

The new syntax is addicted by Make.  The variable reference needs
parentheses, like $(FOO), but you can omit them for single-letter
variables, like $F.  Yet, in Makefiles, people tend to use the
parenthetical form for consistency / clarification.

At this moment, only the environment variable is supported, but I will
extend the concept of 'variable' later on.

The variables are expanded in the lexer so we can simplify the token
handling on the parser side.

For example, the following code works.

[Example code]

  config MY_TOOLCHAIN_LIST
          string
          default "My tools: CC=$(CC), AS=$(AS), CPP=$(CPP)"

[Result]

  $ make -s alldefconfig && tail -n 1 .config
  CONFIG_MY_TOOLCHAIN_LIST="My tools: CC=gcc, AS=as, CPP=gcc -E"

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
2018-05-29 03:28:58 +09:00
Sam Ravnborg 694c49a7c0 kconfig: drop localization support
The localization support is broken and appears unused.
There is no google hits on the update-po-config target.
And there is no recent (5 years) activity related to the localization.

So lets just drop this as it is no longer used.

Suggested-by: Ulf Magnusson <ulfalizer@gmail.com>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-28 18:25:21 +09:00
Masahiro Yamada 1c5af5cf93 kconfig: refactor ncurses package checks for building mconf and nconf
The mconf (or its infrastructure, lxdiaglog) depends on the ncurses.
Move and rename check-lxdialog.sh to mconf-cfg.sh to make it work in
the same way as for qconf and gconf.

This commit fixes some more weirdnesses.

The nconf also needs ncurses packages.  HOSTLOADLIBES_nconf is set
to the libraries needed for nconf, but the cflags is not explicitly
set.  Actually, nconf relies on the check-lxdialog.sh for the proper
cflags:

HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
                    -DLOCALE

The code above passes the ncurses flags to all objects, even for conf,
qconf, gconf.  Let's pass the ncurses flags only to mconf and nconf.

Currently, the presence of ncurses is not checked for nconf.  Let's
show a prompt like the mconf case.

According to Randy's report, the shell scripts still need to carry
the fallback code in case the pkg-config fails to find the ncurses
packages.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2018-05-28 18:25:21 +09:00
Masahiro Yamada b464ef583d kconfig: refactor GTK+ package checks for building gconf
Refactor the package checks for gconf in the same way as for qconf.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2018-05-28 18:25:21 +09:00
Masahiro Yamada 0b669a5076 kconfig: refactor Qt package checks for building qconf
Currently, the necessary package checks for building qconf is
surrounded by ifeq ($(MAKECMDGOALS),xconfig) ... endif.
Then, Make will restart when .tmp_qtcheck is generated.

To simplify the Makefile, move the scripting to a separate file,
and use filechk.  The shell script is executed everytime xconfig
is run, but it is not a costly script.

In the old code, 'pkg-config --exists' only checked Qt5Core / QtCore,
but the set of necessary packages should be checked.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2018-05-28 18:25:21 +09:00
Don Zickus 17baab68d3 kconfig: extend output of 'listnewconfig'
We at Red Hat/Fedora have generally tried to have a per file breakdown of
every config option we set.  This makes it easy for us to add new options
when they are exposed and keep a changelog of why they were set.

A Fedora example is here:
  https://src.fedoraproject.org/cgit/rpms/kernel.git/tree/configs/fedora/generic

Using various merge scripts, we build up a config file and run it through
'make listnewconfig' and 'make oldnoconfig'.   The idea is to print out new
config options that haven't been manually set and use the default until
a patch is posted to set it properly.

To speed things up, it would be nice to make it easier to generate a
patch to post the default setting.  The output of 'make listnewconfig'
has two issues that limit us:

- it doesn't provide the default value
- it doesn't provide the new 'choice' options that get flagged in
  'oldconfig'

This patch extends 'listnewconfig' to address the above two issues.

This allows us to run a script

make listnewconfig | rhconfig-tool -o patches; git send-email patches/

The output of 'make listnewconfig':

CONFIG_NET_EMATCH_IPT
CONFIG_IPVLAN
CONFIG_ICE
CONFIG_NET_VENDOR_NI
CONFIG_IEEE802154_MCR20A
CONFIG_IR_IMON_DECODER
CONFIG_IR_IMON_RAW

The new output of 'make listnewconfig':

CONFIG_KERNEL_XZ=n
CONFIG_KERNEL_LZO=n
CONFIG_NET_EMATCH_IPT=n
CONFIG_IPVLAN=n
CONFIG_ICE=n
CONFIG_NET_VENDOR_NI=y
CONFIG_IEEE802154_MCR20A=n
CONFIG_IR_IMON_DECODER=n
CONFIG_IR_IMON_RAW=n

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-13 23:23:11 +09:00