Commit Graph

11 Commits

Author SHA1 Message Date
Mikulas Patocka e262f34741 dm stats: add support for request-based DM devices
This makes it possible to use dm stats with DM multipath.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-06-17 12:40:41 -04:00
Mikulas Patocka dfcfac3e4c dm stats: collect and report histogram of IO latencies
Add an option to dm statistics to collect and report a histogram of
IO latencies.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-06-17 12:40:40 -04:00
Mikulas Patocka c96aec344d dm stats: support precise timestamps
Make it possible to use precise timestamps with nanosecond granularity
in dm statistics.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-06-17 12:40:40 -04:00
Mikulas Patocka dd4c1b7d0c dm stats: fix divide by zero if 'number_of_areas' arg is zero
If the number_of_areas argument was zero the kernel would crash on
div-by-zero.  Add better input validation.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # v3.12+
2015-06-17 12:40:39 -04:00
Pekka Enberg 0f24b79b52 dm stats: Use kvfree() in dm_kvfree()
Use kvfree() instead of open-coding it.

Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-06-11 17:13:02 -04:00
Linus Torvalds 140dfc9299 - Significant DM thin-provisioning performance improvements to meet
performance requirements that were requested by the Gluster
   distributed filesystem.  Specifically, dm-thinp now takes care to
   aggregate IO that will be issued to the same thinp block before
   issuing IO to the underlying devices.  This really helps improve
   performance on HW RAID6 devices that have a writeback cache because it
   avoids RMW in the HW RAID controller.
 
 - Some stable fixes: fix leak in DM bufio if integrity profiles were
   enabled, use memzero_explicit in DM crypt to avoid any potential for
   information leak, and a DM cache fix to properly mark a cache block
   dirty if it was promoted to the cache via the overwrite optimization.
 
 - A few simple DM persistent data library fixes
 
 - DM cache multiqueue policy block promotion improvements.
 
 - DM cache discard improvements that take advantage of range
   (multiblock) discard support in the DM bio-prison.  This allows for
   much more efficient bulk discard processing (e.g. when mkfs.xfs
   discards the entire device).
 
 - Some small optimizations in DM core and RCU deference cleanups
 
 - DM core changes to suspend/resume code to introduce the new internal
   suspend/resume interface that the DM thin-pool target now uses to
   suspend/resume active thin devices when the thin-pool must
   suspend/resume.  This avoids forcing userspace to track all active
   thin volumes in a thin-pool when the thin-pool is suspended for the
   purposes of metadata or data space resize.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUhcvVAAoJEMUj8QotnQNaB78H+wSA6sDJGOhc6e1KlWoFh4Hx
 hTmwm/O8Fxrp9StO3NPlcv9l+l9FX9pGzN/lo3OsxgWMTs/vLTKZ5SAe3/YT3/b9
 6SFC7pC70+glakgMhhXWRvoeSEQC1OWb5BuvOF8irl2n+7B9NAn/zHd9pgpmyWHp
 nBXK2GJBMzVSiI47NMjo2n6007LgQq0xxSJ9luwdrpwjDqD1d406DrhzbHou5H2Y
 b8XJGQzUy0GZCX8ycwPVXo9svp2Bc+XajVcgOj5Qg7s2uV5car8NN7TxhSOKSXn2
 VpiSyEa2MLHAbFuWtGs8XO98z/m5JlGf1eIgRO4s7w59URgpzdxOHXLlAoyqIGw=
 =opXi
 -----END PGP SIGNATURE-----

Merge tag 'dm-3.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Significant DM thin-provisioning performance improvements to meet
   performance requirements that were requested by the Gluster
   distributed filesystem.

   Specifically, dm-thinp now takes care to aggregate IO that will be
   issued to the same thinp block before issuing IO to the underlying
   devices.  This really helps improve performance on HW RAID6 devices
   that have a writeback cache because it avoids RMW in the HW RAID
   controller.

 - Some stable fixes: fix leak in DM bufio if integrity profiles were
   enabled, use memzero_explicit in DM crypt to avoid any potential for
   information leak, and a DM cache fix to properly mark a cache block
   dirty if it was promoted to the cache via the overwrite optimization.

 - A few simple DM persistent data library fixes

 - DM cache multiqueue policy block promotion improvements.

 - DM cache discard improvements that take advantage of range
   (multiblock) discard support in the DM bio-prison.  This allows for
   much more efficient bulk discard processing (e.g.  when mkfs.xfs
   discards the entire device).

 - Some small optimizations in DM core and RCU deference cleanups

 - DM core changes to suspend/resume code to introduce the new internal
   suspend/resume interface that the DM thin-pool target now uses to
   suspend/resume active thin devices when the thin-pool must
   suspend/resume.

   This avoids forcing userspace to track all active thin volumes in a
   thin-pool when the thin-pool is suspended for the purposes of
   metadata or data space resize.

* tag 'dm-3.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (49 commits)
  dm crypt: use memzero_explicit for on-stack buffer
  dm space map metadata: fix sm_bootstrap_get_count()
  dm space map metadata: fix sm_bootstrap_get_nr_blocks()
  dm bufio: fix memleak when using a dm_buffer's inline bio
  dm cache: fix spurious cell_defer when dealing with partial block at end of device
  dm cache: dirty flag was mistakenly being cleared when promoting via overwrite
  dm cache: only use overwrite optimisation for promotion when in writeback mode
  dm cache: discard block size must be a multiple of cache block size
  dm cache: fix a harmless race when working out if a block is discarded
  dm cache: when reloading a discard bitset allow for a different discard block size
  dm cache: fix some issues with the new discard range support
  dm array: if resizing the array is a noop set the new root to the old one
  dm: use rcu_dereference_protected instead of rcu_dereference
  dm thin: fix pool_io_hints to avoid looking at max_hw_sectors
  dm thin: suspend/resume active thin devices when reloading thin-pool
  dm: enhance internal suspend and resume interface
  dm thin: do not allow thin device activation while pool is suspended
  dm: add presuspend_undo hook to target_type
  dm: return earlier from dm_blk_ioctl if target doesn't implement .ioctl
  dm thin: remove stale 'trim' message in block comment above pool_message
  ...
2014-12-08 21:10:03 -08:00
Mike Snitzer ffcc393641 dm: enhance internal suspend and resume interface
Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast
-- dm-stats will continue using these methods to avoid all the extra
suspend/resume logic that is not needed in order to quickly flush IO.

Introduce dm_internal_suspend_noflush() variant that actually calls the
mapped_device's target callbacks -- otherwise target-specific hooks are
avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend).  Common
code between dm_internal_{suspend_noflush,resume} and
dm_{suspend,resume} was factored out as __dm_{suspend,resume}.

Update dm_internal_{suspend_noflush,resume} to always take and release
the mapped_device's suspend_lock.  Also update dm_{suspend,resume} to be
aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond
accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to
be cleared.  Add lockdep annotation to dm_suspend() and dm_resume().

The existing DM_SUSPEND_FLAG remains unchanged.
DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and
cleared by dm_internal_resume().

Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device
was already suspended when dm_internal_suspend_noflush() was called --
this can be thought of as a "nested suspend".  A "nested suspend" can
occur with legacy userspace dm-thin code that might suspend all active
thin volumes before suspending the pool for resize.

But otherwise, in the normal dm-thin-pool suspend case moving forward:
the thin-pool will have DM_SUSPEND_FLAG set and all active thins from
that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set.

Also add DM_INTERNAL_SUSPEND_FLAG to status report.  This new
DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with
debugging (e.g. 'dmsetup info' will report an internally suspended
device accordingly).

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
2014-11-19 12:31:17 -05:00
Christoph Lameter 1f125e76f5 md: Replace __this_cpu_ptr with raw_cpu_ptr
__this_cpu_ptr is being phased out.

Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-26 13:45:47 -04:00
Mikulas Patocka 76f5bee5c3 dm stats: initialize read-only module parameter
The module parameter stats_current_allocated_bytes in dm-mod is
read-only.  This parameter informs the user about memory
consumption.  It is not supposed to be changed by the user.

However, despite being read-only, this parameter can be set on
modprobe or insmod command line:
modprobe dm-mod stats_current_allocated_bytes=12345

The kernel doesn't expect that this variable can be non-zero at module
initialization and if the user sets it, it results in warning.

This patch initializes the variable in the module init routine, so
that user-supplied value is ignored.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.12+
2013-12-10 19:13:21 -05:00
Mikulas Patocka bbf3f8cbdc dm stats: fix possible counter corruption on 32-bit systems
There was a deliberate race condition in dm_stat_for_entry() to avoid the
overhead of disabling and enabling interrupts.  The race could result in
some events not being counted on 64-bit architectures.

However, on 32-bit architectures, operations on long long variables are
not atomic, so the race condition could cause the counter to jump by 2^32.
Such jumps could be disruptive, so we need to do proper locking on 32-bit
architectures.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Alasdair G. Kergon <agk@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-09-18 14:41:06 -04:00
Mikulas Patocka fd2ed4d252 dm: add statistics support
Support the collection of I/O statistics on user-defined regions of
a DM device.  If no regions are defined no statistics are collected so
there isn't any performance impact.  Only bio-based DM devices are
currently supported.

Each user-defined region specifies a starting sector, length and step.
Individual statistics will be collected for each step-sized area within
the range specified.

The I/O statistics counters for each step-sized area of a region are
in the same format as /sys/block/*/stat or /proc/diskstats but extra
counters (12 and 13) are provided: total time spent reading and
writing in milliseconds.  All these counters may be accessed by sending
the @stats_print message to the appropriate DM device via dmsetup.

The creation of DM statistics will allocate memory via kmalloc or
fallback to using vmalloc space.  At most, 1/4 of the overall system
memory may be allocated by DM statistics.  The admin can see how much
memory is used by reading
/sys/module/dm_mod/parameters/stats_current_allocated_bytes

See Documentation/device-mapper/statistics.txt for more details.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-09-05 20:46:06 -04:00