Commit Graph

36 Commits

Author SHA1 Message Date
Sascha Hauer 17e8351a77 thermal: consistently use int for temperatures
The thermal code uses int, long and unsigned long for temperatures
in different places.

Using an unsigned type limits the thermal framework to positive
temperatures without need. Also several drivers currently will report
temperatures near UINT_MAX for temperatures below 0°C. This will probably
immediately shut the machine down due to overtemperature if started below
0°C.

'long' is 64bit on several architectures. This is not needed since INT_MAX °mC
is above the melting point of all known materials.

Consistently use a plain 'int' for temperatures throughout the thermal code and
the drivers. This only changes the places in the drivers where the temperature
is passed around as pointer, when drivers internally use another type this is
not changed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Peter Feuerer <peter@piie.net>
Cc: Punit Agrawal <punit.agrawal@arm.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Peter Feuerer <peter@piie.net>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-acpi@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: lm-sensors@lm-sensors.org
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-08-03 23:15:50 +08:00
Geert Uytterhoeven ac71c7025e thermal: rcar: Make error and remove paths symmetrical with init
Swap interrupt disable and thermal zone unregistration in the error and
remove paths, to make them more symmetrical with the initialization
path.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-02-24 14:58:05 -04:00
Geert Uytterhoeven 0b37a83a91 thermal: rcar: Fix race condition between init and interrupt
As soon as the interrupt has been enabled by devm_request_irq(), the
interrupt routine may be called, depending on the current status of the
hardware.

However, at that point rcar_thermal_common hasn't been initialized
complely yet. E.g. rcar_thermal_common.base is still NULL, causing a
NULL pointer dereference:

    Unable to handle kernel NULL pointer dereference at virtual address 0000000c
    pgd = c0004000
    [0000000c] *pgd=00000000
    Internal error: Oops: 5 [#1] SMP ARM
    CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-rc7-ape6evm-04564-gb6e46cb7cbe82389 #30
    Hardware name: Generic R8A73A4 (Flattened Device Tree)
    task: ee8953c0 ti: ee896000 task.ti: ee896000
    PC is at rcar_thermal_irq+0x1c/0xf0
    LR is at _raw_spin_lock_irqsave+0x48/0x54

Postpone the call to devm_request_irq() until all initialization has
been done to fix this.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-02-24 14:56:42 -04:00
Geert Uytterhoeven ee853addd9 thermal: rcar: Spelling/grammar: s/drier use .../driver uses ...s/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-12 16:48:10 -04:00
Yoshihiro Shimoda 913015c6df thermal: rcar: change type of ctemp in rcar_thermal_update_temp()
Since the ctemp is used for rcar_thermal_write() in
rcar_thermal_update_temp(), the type of 'ctemp' should be "u32" instead
of "int". This patch also changes type of the helper variables 'old'
and 'new'.

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-07 08:59:36 -04:00
Yoshihiro Shimoda 1131374654 thermal: rcar: fix ENR register value
On R-Mobile APE6, since it has 3 thermal zones, ENR register
has enable bits in bit 19-16, bit 11-8 and bit 3-0.

However, on R-Car gen2, since it has 1 thermal zone, ENR register has
enable bits in bit 3-0. (In other words, the write value should always
be 0 for bit 31-4 of ENR register.)

So, this patch fixes the ENR register value using I/O resource sets.

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-07 08:55:54 -04:00
Jingoo Han b0a60d88d6 thermal: rcar: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15 17:15:26 +08:00
Geert Uytterhoeven 09be511cda thermal: rcar: Use pm_runtime_put() i.s.o. pm_runtime_put_sync()
There's no need for this to be synchronous

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15 16:47:39 +08:00
Patrick Titiano 9477165ec5 thermal: rcar-thermal: update thermal zone only when temperature changes
Avoid updating the thermal zone in case an IRQ was triggered but the
temperature didn't effectively change.
Note this is not a driver issue.
Below is a captured debug trace illustrating the purpose of this patch:
out of 8 thermal zone updates, only 2 are actually necessary.

[   41.120000] rcar_thermal_work(): cctemp=25000
[   41.120000] rcar_thermal_work(): nctemp=30000
[   41.120000] rcar_thermal_work(): temp is now 30000C, update thermal zone
[   58.990000] rcar_thermal_work(): cctemp=30000
[   58.990000] rcar_thermal_work(): nctemp=30000
[   58.990000] rcar_thermal_work(): same temp, do not update thermal zone
[   59.290000] rcar_thermal_work(): cctemp=30000
[   59.290000] rcar_thermal_work(): nctemp=30000
[   59.290000] rcar_thermal_work(): same temp, do not update thermal zone
[   59.590000] rcar_thermal_work(): cctemp=30000
[   59.590000] rcar_thermal_work(): nctemp=30000
[   59.590000] rcar_thermal_work(): same temp, do not update thermal zone
[   59.890000] rcar_thermal_work(): cctemp=30000
[   59.890000] rcar_thermal_work(): nctemp=30000
[   59.890000] rcar_thermal_work(): same temp, do not update thermal zone
[   60.190000] rcar_thermal_work(): cctemp=30000
[   60.190000] rcar_thermal_work(): nctemp=30000
[   60.190000] rcar_thermal_work(): same temp, do not update thermal zone
[   60.490000] rcar_thermal_work(): cctemp=30000
[   60.490000] rcar_thermal_work(): nctemp=30000
[   60.490000] rcar_thermal_work(): same temp, do not update thermal zone
[   60.790000] rcar_thermal_work(): cctemp=30000
[   60.790000] rcar_thermal_work(): nctemp=35000
[   60.790000] rcar_thermal_work(): temp is now 35000C, update thermal zone

I suspect this may be due to sensor sampling accuracy / fluctuation,
but no formal proof.

Signed-off-by: Patrick Titiano <ptitiano@baylibre.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-04-08 09:01:39 +08:00
Patrick Titiano 206c0cba09 thermal: rcar-thermal: fix same mask applied twice
Mask is already applied preceding the if statement.
Remove the second mask.

Signed-off-by: Patrick Titiano <ptitiano@baylibre.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-04-08 09:01:39 +08:00
Geert Uytterhoeven 6fe495e0f8 thermal: rcar: comment spelling
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-08 10:11:36 +01:00
Zhang Rui e7cd7886ef Merge branches 'misc', 'drv_cleanup', 'devm-cleanup' and 'ti-soc' of .git into next 2013-05-28 10:46:46 +08:00
Laurent Pinchart 3db46c9396 thermal: rcar: Fix typo in probe information message
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-05-28 10:04:21 +08:00
Wolfram Sang c28f692c6f drivers/thermal: don't check resource with devm_ioremap_resource
devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-05-20 23:35:52 +08:00
Sachin Kamat 6135ba36f4 Thermal: rcar: Remove redundant platform_set_drvdata()
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no
driver is bound) removes the need to set driver data field to
NULL.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-05-06 22:37:30 +08:00
Kuninori Morimoto 51d45d2594 thermal: rcar: add pm_runtime_xxx() support
Current rcar_thermal() didn't care about own power.
Without this patch, rcar_thermal doesn't work on APE6 board

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-04-02 21:18:39 +08:00
Kuninori Morimoto 1dc20828e6 thermal: rcar: tidyup registration failure case
Current rcar_thermal driver didn't care about rcar_theraml_irq_disable()
when registration failure case on _probe(), and _remove().
And, it returns without unregistering thermal zone when
registration failure case on _probe().
This patch fixes these issue.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-04-02 21:15:04 +08:00
Devendra Naga fb84d9907f thermal: rcar_thermal: propagate return value of thermal_zone_device_register
thermal_zone_device_register returns a value contained in the pointer itself
use PTR_ERR to obtain the address and return it at the end.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-03-11 23:09:24 +08:00
Sachin Kamat 5095526faf Thermal: rcar: Convert to devm_ioremap_resource()
Use the newly introduced devm_ioremap_resource() instead of
devm_request_and_ioremap() which provides more consistent error handling.

devm_ioremap_resource() provides its own error messages; so all explicit
error messages can be removed from the failure code paths.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-03-11 23:09:12 +08:00
Wei Yongjun f0e68fc3ca thermal: rcar: fix missing unlock on error in rcar_thermal_update_temp()
Add the missing unlock before return from function rcar_thermal_update_temp()
in the error handling case.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-03-11 23:08:33 +08:00
Arnd Bergmann f5b6d45f8c thermal: rcar: remove __devinitconst
commit 76cc18874 "thermal: rcar: add Device Tree support"
added device tree support for this driver, but also added
an instance of __devinitconst, which is no longer defined

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Zhang Rui <rui.zhang@intel.com>
2013-02-22 17:38:40 +08:00
Kuninori Morimoto 76cc188749 thermal: rcar: add Device Tree support
Support for loading the Renesas R-Car thermal module via devicetree.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-02-08 20:25:36 +08:00
Kuninori Morimoto e6e053f4e4 thermal: rcar: remove machine_power_off() from rcar_thermal_notify()
Machine/System power-off is run in thermal frame work if
it become critical temperature.
This patch removed pointless machine_power_off()
from thermal_zone_device_ops :: .notify

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-02-06 14:13:59 +08:00
Kuninori Morimoto e0a5172e9e thermal: rcar: add interrupt support
This patch adds interrupt support for R-Car thermal driver.

New generation R-Car thermal sensor interrupt controller was
different from old generation.
This patch supports new generation sensor only,
since the old generation interrupt controller had never been used before,
and will never be used in the future.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-02-06 14:13:59 +08:00
Kuninori Morimoto e9137a582f thermal: rcar: add read/write functions for common/priv data
R-Car thermal driver will use struct common in next
feature (interrupt support).
But the register address is different between struct priv and common.
This patch adds read/write functions for struct common,
and use macro technique to avoid wrong register access.

This is preparation patch for next feature (interrupt support),
therefore, there is no user to use this common read/write
function at this point.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-02-06 14:13:58 +08:00
Kuninori Morimoto 3676d1dd3d thermal: rcar: multi channel support
R-Car thermal sensor will be multi channel sensor in next generation.
But "IRQ controlling method" and "register mapping" are
different between old/new chip.

This patch adds multi sensor support.
Then, this driver assumes there is common register
if platform has IRQ resource.

The IRQ will be supported soon.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-02-06 14:13:58 +08:00
Kuninori Morimoto b2bbc6a2ac thermal: rcar: use mutex lock instead of spin lock
Current R-Car thermal driver is using spin lock for each
registers read/write, but it is pointless lock.
This lock is required while reading temperature,
but it needs long wait (= 300ms).
So, this patch used mutex lock while reading temperature,
instead of spin lock for each registers.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-02-06 14:13:57 +08:00
Kuninori Morimoto f8f53e1874 thermal: rcar: enable CPCTL to use hardware TSC deciding
If CPCTL was 1 on R-Car thermal, the thermal comparator offset
is automatically decided by hardware.
And this CPCTL is the conditions which validate interrupt.
This patch enabled CPCTL.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-02-06 14:13:57 +08:00
Kuninori Morimoto 9dde8f8608 thermal: rcar: use parenthesis on macro
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-02-06 14:13:57 +08:00
kuninori.morimoto.gx@renesas.com d2a73e225d thermal: rcar: add .get_trip_type/temp and .notify support
This patch adds .get_trip_type(), .get_trip_temp(), and .notify()
on rcar_thermal_zone_ops.
Driver will try platform power OFF if it reached to
critical temperature.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-01-04 15:37:45 +08:00
Kuninori Morimoto d12250ef8d thermal: rcar: add rcar_zone_to_priv() macro
This patch adds rcar_zone_to_priv()
which is a helper macro for gettign private data.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-11-26 11:03:55 +08:00
Kuninori Morimoto c499703e64 thermal: rcar: fixup the unit of temperature
The unit of temperature is Milli-Celsius.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-11-26 11:03:45 +08:00
Kuninori Morimoto 4e8e2f644e thermal: rcar_thermal: remove explicitly used devm_kfree/iounap()
devm_kfree and devm_iounmap should not have to be explicitly used

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-11-07 11:35:46 +08:00
Durgadoss R 50125a9b27 Thermal: Pass zone parameters as argument to tzd_register
This patch adds the thermal zone parameter as an argument to
the tzd_register() function call; and updates other drivers
using this function.

Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-11-05 13:59:57 +08:00
Devendra Naga 608f62b996 thermal: solve compilation errors in rcar_thermal
following were the errors reported

drivers/thermal/rcar_thermal.c: In function ‘rcar_thermal_probe’:
drivers/thermal/rcar_thermal.c:214:10: warning: passing argument 3 of ‘thermal_zone_device_register’ makes integer from pointer without a cast [enabled by default]
include/linux/thermal.h:166:29: note: expected ‘int’ but argument is of type ‘struct rcar_thermal_priv *’
drivers/thermal/rcar_thermal.c:214:10: error: too few arguments to function ‘thermal_zone_device_register’
include/linux/thermal.h:166:29: note: declared here
make[1]: *** [drivers/thermal/rcar_thermal.o] Error 1
make: *** [drivers/thermal/rcar_thermal.o] Error 2

with gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5)

Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-11-03 09:52:48 +08:00
Kuninori Morimoto 1e426ffddf thermal: add Renesas R-Car thermal sensor support
This patch add basic Renesas R-Car thermal sensor support.
It was tested on R-Car H1 Marzen board.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-09-24 14:44:37 +08:00