Commit Graph

242 Commits

Author SHA1 Message Date
Takashi Sakamoto 9c6893e0be ALSA: fireworks: add support for AudioFire2 quirk
Fireworks uses TSB43CB43(IceLynx-Micro) as its IEC 61883-1/6 interface.
This chip includes ARM7 core, and loads and runs program. The firmware
is stored in on-board memory and loaded every powering-on.

Echo Audio ships several versions of firmwares for each model. These
firmwares have each quirk and the quirk changes a sequence of packets.

AudioFire2 has a quirk to transfer a first packet with non-zero in
its dbc field. This causes ALSA Fireworks driver to detect discontinuity.
As long as I investigated, firmware 5.7, 5.7.6 and 5.8 have this quirk.

This commit adds a support for the quirk to handle AudioFire2 packets.
For safe, CIP_SKIP_INIT_DBC_CHECK is applied to all versions of
AudioFire2's firmwares.

02 00050002 90ffffff <-
42 0005000a 90013000
42 00050012 90014400
42 0005001a 90015800
02 0005001a 90ffffff
42 00050022 90019000
42 0005002a 9001a400
42 00050032 9001b800
02 00050032 90ffffff
42 0005003a 9001d000
42 00050042 9001e400
42 0005004a 9001f800
02 0005004a 90ffffff

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-07-27 10:12:25 +02:00
Takashi Sakamoto cf8a471909 ALSA: bebob: add support for Behringer FCA 610/1616
They're based on DM1500 (ArchWave produced), and BeBoB version 3 is
installed.

$ cat /proc/asound/FCA610/firewire/firmware
Manufacturer:	bridgeCo
Protocol Ver:	3
Build Ver:		0
GUID:		0x001564000002AD73
Model ID:		0x03
Model Rev:		0
Firmware Date:	20121102
Firmware Time:	153431
Firmware ID:	0x610
Firmware Ver:	8348
Base Addr:		0x400C0080
Max Size:		1422624
Loader Date:	20121015
Loader Time:	104710

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15 13:38:47 +02:00
Takashi Sakamoto 8d1c2694e4 ALSA: bebob: keep duplex streams always to keep internal multiplexer properly
Behringer FCA610 transmits packets with periodic noisy PCM samples
when receiving no streams, and generates a bit noisy sound.

ALSA BeBoB driver is programmed to establish both in/out connections
when starting streaming, then transfers packets as userspace applications
requested. This means that there's a case that one of incoming/outgoing
streams is running, to save CPU and bandwidth usage. Although, it's natural
to start transferring packets in both direction.

This commit makes this driver to keeps duplex streams always.

Tested-by: Kim Tore Jensen <kim@incendio.no>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15 13:38:29 +02:00
Takashi Sakamoto c4d860a0d2 ALSA: bebob: loosen up severity of checking continuity for BeBoB v3 quirk
PrismSound Orpheus, Behringer UFX1604 and FCA610 work with BeBoB v3, and
they're confirmed to transmit discontinuous packets in the beginning of
streaming.

payload    CIP headers
  8        0x00070000 0x9002FFFF
  8        0x00070000 0x9002FFFF
  8        0x00070000 0x9002FFFF
  8        0x00070008 0x9002FFFF <-
  8        0x00070008 0x9002FFFF
  8        0x00070008 0x9002FFFF
  8        0x00070008 0x9002FFFF
  8        0x00070008 0x9002FFFF
  8        0x00070008 0x9002FFFF
232        0x00070000 0x9002E798 <-
232        0x00070008 0x9002FB99
232        0x00070010 0x90021398
  8        0x00070018 0x9002FFFF
(This sample was got with Behringer FCA610 and FFADO library.)

This commit sets CIP_EMPTY_HAS_WRONG_DBC and CIP_SKIP_DBC_ZERO_CHECK to
ignore these discontinuities.

Tested-by: Kim Tore Jensen <kim@incendio.no>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15 13:38:14 +02:00
Takashi Sakamoto 9a73195e61 ALSA: bebob: expand timeout for DM1500 quirk
Behringer FCA610 and UFX1604 is confirmed to require more time till
transmitting packets after establishing connections. This seems to
be a quirk of DM1500 ASIC which ArchWave produced.

For this quirk, this commit extends the time to wait up to 2 seconds.
As a result, in worst cases, below userspace functions require 2 seconds
to return.
 - snd_pcm_prepare()
 - snd_pcm_hw_params()
 - snd_pcm_recover()

Tested-by: Kim Tore Jensen <kim@incendio.no>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15 13:38:00 +02:00
Takashi Sakamoto 7b4d7dcfa8 ALSA: bebob: add 'version' member for BeBoB protocol version
BeBoB installed devices have BeBoB register area. This area stores
basic information about its firmware. A register has its protocol
version.

This commit adds 'version' member and store the device's protocol
version to handle v3 quirks in following commits.

Tested-by: Kim Tore Jensen <kim@incendio.no>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15 13:37:26 +02:00
Takashi Sakamoto 0577379271 ALSA: bebob: add SYT-Match support
In previous commits, this driver can detect the source of clock as mush
as possible. SYT-Match mode is also available.

This commit purge the restriction.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15 13:37:07 +02:00
Takashi Sakamoto 554d8983a0 ALSA: bebob: obsolete string literal expression for clock source
The old string literals were completely replaced by new normalized
representation.

This commit obsoletes it.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15 13:36:44 +02:00
Takashi Sakamoto 3e254b16b6 ALSA: bebob: use normalized representation for the type of clock source
This commit changes function prototype and its processing. As a result,
function caller can execute additional processing according to detected
clock source.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15 13:36:00 +02:00
Takashi Sakamoto ba5177131d ALSA: bebob: preparation for replacing string literals by normalized representation for model-dependent structures
Previous commit adds a enumerator as a normalized representation of
clock source, while model-dependent structures still use string literals
for this purpose.

This commit is a preparation for replacement.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15 13:34:47 +02:00
Takashi Sakamoto 13a4f42016 ALSA: bebob: apply new enumerator to normalize the type of clock source
Previous commit allows this driver to detect several types of clock
source, while there's no normalized expression for it.

This commit adds a new enumerator for this purpose.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15 13:34:29 +02:00
Takashi Sakamoto 5a66881270 ALSA: bebob: improve signal mode detection for clock source
With BeBoB version 3, current ALSA BeBoB driver detects the type of
current clock signal source wrongly. This is due to a lack of proper
implementation to parse the information.

This commit renews the parser. As a result, this driver detects
SYT-Match clock signal, thus it can start streams with two modes;
SYT-Match mode and the others. SYT-Match mode will be supported in future
commits.

There's a constrain about detected internal/external clock source.
When detecting external clock source, this driver allows userspace
applications to use current sampling rate only. This is due to consider
abour synchronization to external clock sources such as S/PDIF, ADAT or
word-clock.

According to several information from some devices, I guesss that the
internal clock of most devices synchronize to IEEE 1394 cycle start
packet. In this case, by a usual way, it's detect as 'Sync type
of output Music Sub-Unit' connected to 'Sync type of PCR output Unit
(oPCR)', and this driver judges it as internal clock. Therefore,
userspace applications is allowed to request arbitrary supported sampling
rates.

On the other hand, several devices based on BeBoB version 3 have
additional internal clock. In this case, by a usual way, it's detect as
'Sync/Additional type of External input Unit'. Unfortunately, there's no
way to distinguish this sync type from the other external clock sources
such as word-clock. In this case, this driver handles it as external and
userspace applications is forced to use current sampling rate.

I note that when the source of clock is detected as 'Isochronous stream
type of input PCR[0]', it's under 'SYT-Match' mode. In this mode, the
synchronization clock is generated according to SYT-series in received
packets. In this case, this driver generates the series by myself. I
experienced this mode often make the device silent suddenly during
playbacking. This means that the mode is easy to lost synchronization.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-15 13:34:13 +02:00
Takashi Sakamoto 31ea49baa1 ALSA: firewire-lib: fix buffer-over-run when detecting packet discontinuity
When detecting packet discontinuity, handle_in_packet() returns minus value
and this value is assigned to unsigned int variable, then the variable has
huge value. As a result, the variable causes buffer-over-run in
handle_out_packet(). This brings invalid page request and system hangup.

This commit fixes the bug to add a new argument into handle_in_packet()
and the number of handled data blocks is assignd to it. The function
return value is just used to check error.

I also considered to change the type of local variable to 'int' in
in_stream_callback(). This idea is based on type-conversion in C standard,
while it may cause future problems when adding more works. Thus, I dropped
this idea.

Fixes: 6fc6b9ce41c6('ALSA: firewire-lib: pass the number of data blocks in incoming packets to outgoing packets')
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-27 17:44:42 +02:00
Takashi Sakamoto 146a5e3c1e ALSA: bebob: add Digidesign Mbox 2 Pro support
This device is based on DM1000E, and BeBoB version 1 firmware is
installed.

$ cat /proc/asound/cards
 0 [Pro            ]: BeBoB - Mbox 2 Pro
                      DIGIDESIGN Mbox 2 Pro (id:1, rev:1),
		      GUID 00a07e0100a90000 at fw1.0, S400

$ cat /proc/asound/Pro/firewire/firmware
Manufacturer:	bridgeCo
Protocol Ver:	1
Build Ver:		0
GUID:		0x00A07E0100A90000
Model ID:		0x01
Model Rev:		1
Firmware Date:	20071031
Firmware Time:	034402
Firmware ID:	0xA9
Firmware Ver:	16777215
Base Addr:		0x20080000
Max Size:		1572864
Loader Date:	20051207
Loader Time:	205554

With this patch, ALSA BeBoB driver can start packet streaming to/from
this model, while as a default, internal multiplexer of this model is
not initialized and generates no sound even if the driver transfers
any packets with PCM samples. To hear any sounds from this model,
userspace applications should be developed to set parameters to the
internal multiplexer. You can see raw information in FFADO website:
http://subversion.ffado.org/wiki/AvcModels/DigiDesignMboxPro2

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-24 17:31:11 +02:00
Takashi Sakamoto a900705491 ALSA: firewire-lib: use protocol error when detecting wrong value in CIP header
When detecting zero in 'dbs' field of CIP header, this packet streaming
should be aborted because of avoiding division-by-zero. This is an error
in an aspect of IEC 61883-1, thus protocol error.

This commit use EPROTO instead of EIO. Actually, the returned value is
not used for userspace and this commit has no effect.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-24 08:23:58 +02:00
Takashi Sakamoto 12e0f438d3 ALSA: firewire-lib: use dev_err() when detecting incoming streaming error
When detecting invalid value in 'dbs' field of CIP header or packet
discontinuity, current implementation reports the status by err_info().
In most cases this state is caused by model-specific issue due to
vendor's customization and should be reported to developers.

This commit use dev_err() instead of dev_info() for this purpose.
In the cases, packet streaming is aborted, thus no message floading
occurs.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-24 08:23:43 +02:00
Takashi Sakamoto 9a2820c118 ALSA: firewire-lib: macro arrangement for code cleanup
Some macros include my misunderstanding for IEC 61883-1 or -6.
Additionally, some fixed values appear on codes.

This commit replaces these with macros with proper names.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-24 08:23:36 +02:00
Takashi Sakamoto 29bcae2081 ALSA: firewire-lib: rename local functions for code cleanup
The naming rule for local functions was inconsistent. This commit
rename them with a consistent manner.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-24 08:23:14 +02:00
Takashi Sakamoto 727d3a0b1f ALSA: firewire-lib: remove restriction for non-blocking mode
Former patches allow non-blocking streams to synchronize with timestamp.
This patch removes the restriction.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-23 09:13:21 +02:00
Takashi Sakamoto a4103bd7fd ALSA: firewire-lib: set streaming error outside of packetization
In previous commit, error handling for incoming packet processing is
outside of packetization. This is nice for reading the codes.

This commit applies this idea for outgoing packet processing, too.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-23 09:13:20 +02:00
Takashi Sakamoto 6fc6b9ce41 ALSA: firewire-lib: pass the number of data blocks in incoming packets to outgoing packets
Current implementation reuses the value of syt field in incoming packet to
outgoing packet for full duplex timestamp synchronization, while the number
of data blocks in outgoing packets refers to hard-coded table and the
synchronization cannot be applied to non-blocking stream.

This commit passes the number of data blocks from incoming packet
processing to outgoing packet processing for the synchronization. For
normal mode, isochronous callback handler is changed to generate the values
of syt and data blocks.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-23 09:13:19 +02:00
Takashi Sakamoto 875be09160 ALSA: firewire-lib: simplify function to calculate the number of data blocks
This function is called according to conditions between the value of
syt and streaming mode(blocking or non-blocking).

To simplify caller's work, this commit push these conditions to the
function.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-23 09:13:19 +02:00
Takashi Sakamoto a2064710ba ALSA: firewire-lib: add buffer-over-run protection at receiving more data blocks than expected
In IEC 61883-6, the number of data blocks in a packet is limited up to
the value of SYT_INTERVAL. Current implementation is compliant to the
limitation, while it can cause buffer-over-run when the value of dbs
field in received packet is illegally large.

This commit adds a validator to detect such illegal packets to prevent
the buffer-over-run. Actually, the buffer is aligned to the size of memory
 page, thus this issue hardly causes system errors due to the room to page
alignment, as long as a few packets includes such jumbo payload; i.e.
a packet to several received packets.

Here, Behringer F-Control Audio 202 (based on OXFW 960) has a quirk to
postpone transferring isochronous packet till finish handling any
asynchronous packets. In this case, this model is lazy, transfers no
packets according to several cycle-start packets. After finishing, this
model pushes required data in next isochronous packet. As a result, the
packet include more data blocks than IEC 61883-6 defines.

To continue to support this model, this commit adds a new flag to extend
the length of calculated payload. This flag allows the size of payload
5 times as large as IEC 61883-6 defines. As a result, packets from this
model passed the validator successfully.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-23 09:13:18 +02:00
Takashi Iwai 9a4f35865f Merge branch 'for-next' into for-linus 2015-04-13 10:23:18 +02:00
Takashi Sakamoto a053fc318b ALSA: bebob: fix to processing in big-endian machine for sending cue
Some M-Audio devices require to receive bootup command just after
powering on, while codes in BeBoB driver doesn't work properly in
big-endian machine because the command should be aligned by
little-endian.

This commit fixes this bug. This fix should go to stable kernel.

Cc: Takayuki Shiroma <t.shiroma.oki@gmail.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-08 18:23:10 +02:00
Takashi Iwai e6826ef145 Merge branch 'for-linus' into for-next 2015-03-12 07:38:46 +01:00
Takashi Sakamoto 59294a01d7 ALSA: firewire-lib: leave unit reference counting completely
With previous commit, this module managed to leave the counting to each
drivers, but the isochronous resources functionality still increment/decrement
the count.

This commit purge such codes to leave the responsibility to each drivers.

Fix: c6f224dc20 ('ALSA: firewire-lib: remove reference counting')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-10 15:27:19 +01:00
Takashi Sakamoto 5b1274efe2 Revert "ALSA: dice: fix wrong offsets for Dice interface"
This reverts commit 8cdebf7109.

The reverted commit breaks out-stream functionality of Dice driver.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-10 15:26:25 +01:00
Yannick Guerrini ce99198131 ALSA: firewire: Fix trivial typos in comments
Change 'propper' to 'proper'
Change 'paramters' to 'parameters'
Change 'SYT_INTEVAL' to 'SYT_INTERVAL'
Change 'aligh'/'alighed' to 'align'/'aligned'

Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-10 12:40:30 +01:00
Takashi Sakamoto 8cdebf7109 ALSA: dice: fix wrong offsets for Dice interface
For received packet stream, the offset of 'RX_SEQ_START' locates after
the offset of 'RX_NUMBER_MIDI', although current macro and proc output
includes wrong offsets.

Fortunately, this bug doesn't affect streaming functionality because
these macro is not used.

This commit fixes these wrong macro and outputs.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-01 10:49:06 +01:00
Takashi Sakamoto f2b14c0bc5 ALSA: oxfw: fix a condition and return code in start_stream()
The amdtp_stream_wait_callback() doesn't return minus value and
the return code is not for error code.

This commit fixes with a propper condition and an error code.

Fixes: f3699e2c77 ('ALSA: oxfw: Change the way to start stream')
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org> # 3.19+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-27 14:42:18 +01:00
Takashi Sakamoto dec84316dd ALSA: fireworks/bebob/dice/oxfw: make it possible to shutdown safely
A part of these drivers, especially BeBoB driver, are programmed to wait
some events. Thus the drivers should not destroy any data in .remove()
context.

This commit moves some destructors from 'struct fw_driver.remove()' to
'struct snd_card.private_free()' to shutdown safely.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org> # 3.19+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-23 09:11:24 +01:00
Takashi Sakamoto d23c2cc448 ALSA: fireworks/bebob/dice/oxfw: allow stream destructor after releasing runtime
Currently stream destructor in each driver has a problem to be called in
a context in which sound card object is released, because the destructors
call amdtp_stream_pcm_abort() and touch PCM runtime data.

The PCM runtime data is destroyed in application's context with
snd_pcm_close(), on the other hand PCM substream data is destroyed after
sound card object is released, in most case after all of ALSA character
devices are released. When PCM runtime is destroyed and PCM substream is
remained, amdtp_stream_pcm_abort() touches PCM runtime data and causes
Null-pointer-dereference.

This commit changes stream destructors and allows each driver to call
it after releasing runtime.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org> # 3.19+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-23 09:11:16 +01:00
Takashi Sakamoto c6f224dc20 ALSA: firewire-lib: remove reference counting
AMDTP helper functions increment/decrement reference counter for an
instance of FireWire unit, while it's complicated for each driver to
process error state.

In previous commit, each driver has the role of reference counting. This
commit removes this role from the helper function.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org> # 3.19+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-23 09:11:08 +01:00
Takashi Sakamoto 12ed719291 ALSA: fireworks/bebob/dice/oxfw: add reference-counting for FireWire unit
Fireworks and Dice drivers try to touch instances of FireWire unit after
sound card object is released, while references to the unit is decremented
in .remove(). When unplugging during streaming, sound card object is
released after .remove(), thus Fireworks and Dice drivers causes GPF or
Null-pointer-dereferencing to application processes because an instance of
FireWire unit was already released.

This commit adds reference-counting for FireWire unit in drivers to allow
them to touch an instance of FireWire unit after .remove(). In most case,
any operations after .remove() may be failed safely.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org> # 3.19+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-23 09:10:38 +01:00
Takashi Sakamoto ca5b50501d ALSA: firewire-lib: fix an unexpected byte sequence for micro sign
The sign for microsecond (U+0085, MICRO SIGN) was encoded to '0x c2 b5'
by UTF-8 character encoding scheme. But the byte sequence was converted
to '0x c3 82 c2 b5' in a previous commit. As a result, the byte
sequence cannot represent microsecond sign in UTF-8 or ASCII. This
may confuse developers.

This commit replaces the sign to string expression with 'microseconds'
to purge superfluous troubles.

Fixes: 5c697e5b46ef("ALSA: firewire-lib: remove rx_blocks_for_midi quirk")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-23 08:46:03 +01:00
Clemens Ladisch 25ca917c0f ALSA: firewire-lib: limit the MIDI data rate
Do no send MIDI bytes at the full rate at which FireWire packets happen
to be sent, but restrict them to the actual rate of a real MIDI port.
This is required by the specification, and prevents data loss when the
device's buffer overruns.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-16 22:51:23 +01:00
Clemens Ladisch 5c697e5b46 ALSA: firewire-lib: remove rx_blocks_for_midi quirk
There are several devices that expect to receive MIDI data only in the
first eight data blocks of a packet.  If the driver restricts the data
rate to the allowed rate (as mandated by the specification, but not yet
implemented by this driver), this happens naturally.  Therefore, there
is no reason to ever try to use more data packets with any device.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-16 22:50:45 +01:00
Takashi Sakamoto 92cb46584e ALSA: fireworks: fix an endianness bug for transaction length
Although the 't->length' is a big-endian value, it's used without any
conversion. This means that the driver always uses 'length' parameter.

Fixes: 555e8a8f7f14("ALSA: fireworks: Add command/response functionality into hwdep interface")
Reported-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-07 16:39:21 +01:00
Dan Carpenter 5580ba7bf6 ALSA: oxfw: some signedness bugs
This code tends to use unsigned variables by default and it causes
signedness bugs when we use negative variables for error handling.
The "i" and "j" variables are used to iterated over small positive
values and so they should be type "int".  The "len" variable doesn't
*need* to be signed but it should be signed to make the code easier to
read and audit.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-15 10:03:21 +01:00
Dan Carpenter 0d3aba30b7 ALSA: oxfw: fix detect_loud_models() return value
This code causes a static checker warning:

	sound/firewire/oxfw/oxfw.c:46 detect_loud_models()
	warn: signedness bug returning '(-2)'

The detect_loud_models() function should return false on falure, so that
we don't try to set up the loud code for hardware that doesn't support
it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-14 16:04:50 +01:00
Takashi Sakamoto 8985f4ac1c ALSA: oxfw: Add hwdep interface
This interface is designed for mixer/control application. By using this
interface, an application can get information about firewire node, can
lock/unlock kernel streaming and can get notification at starting/stopping
kernel streaming.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-10 10:50:00 +01:00
Takashi Sakamoto 05588d340a ALSA: oxfw: Add support for capture/playback MIDI messages
This commit adds MIDI functionality with an assumption of 'if the device
has MIDI comformant data channels in its stream formation, the device has
one MIDI port'.

When no streams have already started, MIDI functionality starts stream
with current sampling rate.

When MIDI functionality has already starts some streams and PCM
functionality is going to start streams at different sampling rate,
this driver stops streams once and changes sampling rate, then restarts
streams for both PCM/MIDI substreams.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-10 10:49:33 +01:00
Takashi Sakamoto 216e256f7b ALSA: oxfw: add support for capturing PCM samples
In previous commit, a support for transmitted packets is added. This commit
add a support for capturing PCM samples.

When any streams are already started, this driver should not change sampling
rate of the device, thus this commit also adds a restriction of sampling rate
in this situation.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-10 10:49:17 +01:00
Takashi Sakamoto b0ac00095f ALSA: oxfw: Add support AMDTP in-stream
Previous commit adds support for some devices which can capture PCM samples.
These devices transmit AMDTP stream in non-blocking mode. This commit adds
functionality to handle AMDTP incoming stream.

OXFW seems to have two quirks:
 - Transmits packets with non-zero dbc in its beginning
 - Transmits packets with wrong values in syt field

For the first quirk, this commit adds CIP_SKIP_INIT_DBC_CHECK flag for
incoming stream to skip first check of dbc.

For the second quirk, this commit doesn't add duplex stream which
Fireworks/BeBoB drivers use. So OXFW driver generates syt value for outgoing
stream.

Here are examples of a sequence of packets transmitted by Behringer F-Control
Audio 202. There are differences between sequences of syt value when OXFW
driver transfers outgoing stream or not.

When driver gives no outgoing stream:
Index   Payload CIP_Header_0    CIP_Header_1
38      14      00020092        900103D1
39      12      00020098        900102FF
40      12      0002009D        9001027F
41      14      000200A2        90010396
42      14      000200A8        900102E8
43      12      000200AE        90010219
44      14      000200B3        90010331
45      12      000200B9        9001025F
46      14      000200BE        90010376
47      12      000200C4        900102A1
00      12      000200C9        9001023E
01      14      000200CE        90010358
02      12      000200D4        90010289
03      16      000200D9        900103A3
04      12      000200E0        900102DD
05      14      000200E5        900103F1
06      12      000200EB        90010335
07      12      000200F0        90010263
08      14      000200F5        9001037C
09      12      000200FB        900102AE

When driver gives outgoing stream:
Index   Payload CIP_Header_0    CIP_Header_1
38      12      000200BD        900104A8
39      14      000200C2        900104A8
40      12      000200C8        900104AC
41      14      000200CD        900104A9
42      12      000200D3        900104B1
43      14      000200D8        900104A8
44      12      000200DE        900104AA
45      14      000200E3        900104A9
46      14      000200E9        900104AE
47      12      000200EF        900104A8
00      14      000200F4        900104AD
01      12      000200FA        900104A7
02      14      000200FF        900104A9
03      12      00020005        900104A9
04      14      0002000A        900104B1
05      12      00020010        900104AA
06      14      00020015        900104AD
07      12      0002001B        900104A7
08      14      00020020        900104AC
09      12      00020026        900104A7

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-10 10:48:59 +01:00
Takashi Sakamoto ec4dba5053 ALSA: oxfw: Add support for Behringer/Mackie devices
Some devices produced by Behringer/Mackie are based on OXFW970/971. This
commit adds support for them. Additionally, this commit changes the way to
name card with some information in config rom.

Ids of some Mackie(Loud) models are not identified, therefore this commit
applies name detection for these models.

The devices support capture/playback of PCM-samples and some of them
supports capture/playback of MIDI messages. These functionalities are
implemented by followed commits.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-10 10:48:30 +01:00
Takashi Sakamoto f3699e2c77 ALSA: oxfw: Change the way to start stream
In past commit, this driver can keep stream formations for each sampling
rate. So its stream functionality can decide stream formations with given
some parameters.

This commit moves related codes from PCM functionality to stream
functionality. Furthermore, to set stream format correctly, this commit
uses AV/C Stream Format Information command instead of AV/C Input/Output
Plug Signal Format command.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-10 10:48:12 +01:00
Takashi Sakamoto 3c96101f19 ALSA: oxfw: Add proc interface for debugging purpose
This commit adds proc interface to get information about stream
formation. This commit also adds snd_oxfw_stream_get_current_formation()
to get current stream formation.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-10 10:47:54 +01:00
Takashi Sakamoto 5cd1d3f47a ALSA: oxfw: Change the way to make PCM rules/constraints
In previous commit, this driver can get to know stream formations at
each supported sampling rates. This commit uses it to make PCM
rules/constraints and obsoletes hard-coded rules/constraints.

For this purpose, this commit adds 'struct snd_oxfw_stream_formation' and
snd_oxfw_stream_parse_format() to parse data channel formation of data
block.

According to datasheet of OXFW970/971, they support 32.0kHz to 196.0kHz.

As long as developers investigate, some devices are confirmed to have
several formats for the same sampling rate.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-10 10:47:37 +01:00
Takashi Sakamoto 5b59d8098d ALSA: oxfw: Add support for AV/C stream format command to get/set supported stream formation
OXFW970/971 may supports AV/C Stream Format Information Specification 1.1
Working Draft (Apr 2005, 1394TA). By using this command, drivers can get to know
stream formations which device supports.

This commit adds 'EXTENDED STREAM FORMAT INFORMATION' command. This command
has two subfunctions, 'SINGLE' and 'LIST'. Drivers can use 'SINGLE' subfunction
to know/set current formation of AMDTP stream, Drivers can use 'LIST'
subfunction to know an available formation of AMDTP stream in a certain sampling
rate.

But some devices don't implement the 'LIST' subfunction. So this commit uses
an assumption that 'if they don't implement it, they don't change stream
formation depending on current each sampling rate'. With this assumption, this
driver generates formations for such devices by:
 1.getting current formation by SINGLE subfunction
 2.getting supported sampling rates
 3.applying current formation for all of supported sampling rates

Followed commit implements a parser of this format information.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-10 10:47:09 +01:00