Commit Graph

111 Commits

Author SHA1 Message Date
Neil Horman c592713b3e shm: Remove silly double assignment
Found a silly double assignment of err is do_shmat.  Silly, but good to
clean up the useless code.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-10 07:58:00 -07:00
Pierre Peiffer a5f75e7f25 IPC: consolidate all xxxctl_down() functions
semctl_down(), msgctl_down() and shmctl_down() are used to handle the same set
of commands for each kind of IPC.  They all start to do the same job (they
retrieve the ipc and do some permission checks) before handling the commands
on their own.

This patch proposes to consolidate this by moving these same pieces of code
into one common function called ipcctl_pre_down().

It simplifies a little these xxxctl_down() functions and increases a little
the maintainability.

Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:14 -07:00
Pierre Peiffer 8f4a3809c1 IPC: introduce ipc_update_perm()
The IPC_SET command performs the same permission setting for all IPCs.  This
patch introduces a common ipc_update_perm() function to update these
permissions and makes use of it for all IPCs.

Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:13 -07:00
Pierre Peiffer 016d7132f2 IPC: get rid of the use *_setbuf structure.
All IPCs make use of an intermetiate *_setbuf structure to handle the IPC_SET
command.  This is not really needed and, moreover, it complicates a little bit
the code.

This patch gets rid of the use of it and uses directly the semid64_ds/
msgid64_ds/shmid64_ds structure.

In addition of removing one struture declaration, it also simplifies and
improves a little bit the common 64-bits path.

Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:13 -07:00
Pierre Peiffer 8d4cc8b5c5 IPC/shared memory: introduce shmctl_down
Currently, the way the different commands are handled in sys_shmctl introduces
some duplicated code.

This patch introduces the shmctl_down function to handle all the commands
requiring the rwmutex to be taken in write mode (ie IPC_SET and IPC_RMID for
now).  It is the equivalent function of semctl_down for shared memory.

This removes some duplicated code for handling these both commands and
harmonizes the way they are handled among all IPCs.

Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:13 -07:00
Pierre Peiffer 48dea404ed IPC: use ipc_buildid() directly from ipc_addid()
By continuing to consolidate a little the IPC code, each id can be built
directly in ipc_addid() instead of having it built from each callers of
ipc_addid()

And I also remove shm_addid() in order to have, as much as possible, the
same code for shm/sem/msg.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:12 -07:00
Lee Schermerhorn 52cd3b0740 mempolicy: rework mempolicy Reference Counting [yet again]
After further discussion with Christoph Lameter, it has become clear that my
earlier attempts to clean up the mempolicy reference counting were a bit of
overkill in some areas, resulting in superflous ref/unref in what are usually
fast paths.  In other areas, further inspection reveals that I botched the
unref for interleave policies.

A separate patch, suitable for upstream/stable trees, fixes up the known
errors in the previous attempt to fix reference counting.

This patch reworks the memory policy referencing counting and, one hopes,
simplifies the code.  Maybe I'll get it right this time.

See the update to the numa_memory_policy.txt document for a discussion of
memory policy reference counting that motivates this patch.

Summary:

Lookup of mempolicy, based on (vma, address) need only add a reference for
shared policy, and we need only unref the policy when finished for shared
policies.  So, this patch backs out all of the unneeded extra reference
counting added by my previous attempt.  It then unrefs only shared policies
when we're finished with them, using the mpol_cond_put() [conditional put]
helper function introduced by this patch.

Note that shmem_swapin() calls read_swap_cache_async() with a dummy vma
containing just the policy.  read_swap_cache_async() can call alloc_page_vma()
multiple times, so we can't let alloc_page_vma() unref the shared policy in
this case.  To avoid this, we make a copy of any non-null shared policy and
remove the MPOL_F_SHARED flag from the copy.  This copy occurs before reading
a page [or multiple pages] from swap, so the overhead should not be an issue
here.

I introduced a new static inline function "mpol_cond_copy()" to copy the
shared policy to an on-stack policy and remove the flags that would require a
conditional free.  The current implementation of mpol_cond_copy() assumes that
the struct mempolicy contains no pointers to dynamically allocated structures
that must be duplicated or reference counted during copy.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:24 -07:00
Lee Schermerhorn ae4d8c16aa mempolicy: fixup Fallback for Default Shmem Policy
get_vma_policy() is not handling fallback to task policy correctly when the
get_policy() vm_op returns NULL.  The NULL overwrites the 'pol' variable that
was holding the fallback task mempolicy.  So, it was falling back directly to
system default policy.

Fix get_vma_policy() to use only non-NULL policy returned from the vma
get_policy op.

shm_get_policy() was falling back to current task's mempolicy if the "backing
file system" [tmpfs vs hugetlbfs] does not support the get_policy vm_op and
the vma policy is null.  This is incorrect for show_numa_maps() which is
likely querying the numa_maps of some task other than current.  Remove this
fallback.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:24 -07:00
Lee Schermerhorn 69682d852f mempolicy: fix reference counting bugs
Address 3 known bugs in the current memory policy reference counting method.
I have a series of patches to rework the reference counting to reduce overhead
in the allocation path.  However, that series will require testing in -mm once
I repost it.

1) alloc_page_vma() does not release the extra reference taken for
   vma/shared mempolicy when the mode == MPOL_INTERLEAVE.  This can result in
   leaking mempolicy structures.  This is probably occurring, but not being
   noticed.

   Fix:  add the conditional release of the reference.

2) hugezonelist unconditionally releases a reference on the mempolicy when
   mode == MPOL_INTERLEAVE.  This can result in decrementing the reference
   count for system default policy [should have no ill effect] or premature
   freeing of task policy.  If this occurred, the next allocation using task
   mempolicy would use the freed structure and probably BUG out.

   Fix:  add the necessary check to the release.

3) The current reference counting method assumes that vma 'get_policy()'
   methods automatically add an extra reference a non-NULL returned mempolicy.
    This is true for shmem_get_policy() used by tmpfs mappings, including
   regular page shm segments.  However, SHM_HUGETLB shm's, backed by
   hugetlbfs, just use the vma policy without the extra reference.  This
   results in freeing of the vma policy on the first allocation, with reuse of
   the freed mempolicy structure on subsequent allocations.

   Fix: Rather than add another condition to the conditional reference
   release, which occur in the allocation path, just add a reference when
   returning the vma policy in shm_get_policy() to match the assumptions.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Greg KH <greg@kroah.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: David Rientjes <rientjes@google.com>
Cc: <eric.whitney@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-10 18:01:19 -07:00
Pierre Peiffer 01b8b07a5d IPC: consolidate sem_exit_ns(), msg_exit_ns() and shm_exit_ns()
sem_exit_ns(), msg_exit_ns() and shm_exit_ns() are all called when an
ipc_namespace is released to free all ipcs of each type.  But in fact, they
do the same thing: they loop around all ipcs to free them individually by
calling a specific routine.

This patch proposes to consolidate this by introducing a common function,
free_ipcs(), that do the job.  The specific routine to call on each
individual ipcs is passed as parameter.  For this, these ipc-specific
'free' routines are reworked to take a generic 'struct ipc_perm' as
parameter.

Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:26 -08:00
Pierre Peiffer ed2ddbf88c IPC: make struct ipc_ids static in ipc_namespace
Each ipc_namespace contains a table of 3 pointers to struct ipc_ids (3 for
msg, sem and shm, structure used to store all ipcs) These 'struct ipc_ids'
are dynamically allocated for each icp_namespace as the ipc_namespace
itself (for the init namespace, they are initialized with pointers to
static variables instead)

It is so for historical reason: in fact, before the use of idr to store the
ipcs, the ipcs were stored in tables of variable length, depending of the
maximum number of ipc allowed.  Now, these 'struct ipc_ids' have a fixed
size.  As they are allocated in any cases for each new ipc_namespace, there
is no gain of memory in having them allocated separately of the struct
ipc_namespace.

This patch proposes to make this table static in the struct ipc_namespace.
Thus, we can allocate all in once and get rid of all the code needed to
allocate and free these ipc_ids separately.

Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net>
Acked-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:26 -08:00
Pavel Emelyanov ae5e1b22f1 namespaces: move the IPC namespace under IPC_NS option
Currently the IPC namespace management code is spread over the ipc/*.c files.
I moved this code into ipc/namespace.c file which is compiled out when needed.

The linux/ipc_namespace.h file is used to store the prototypes of the
functions in namespace.c and the stubs for NAMESPACES=n case.  This is done
so, because the stub for copy_ipc_namespace requires the knowledge of the
CLONE_NEWIPC flag, which is in sched.h.  But the linux/ipc.h file itself in
included into many many .c files via the sys.h->sem.h sequence so adding the
sched.h into it will make all these .c depend on sched.h which is not that
good.  On the other hand the knowledge about the namespaces stuff is required
in 4 .c files only.

Besides, this patch compiles out some auxiliary functions from ipc/sem.c,
msg.c and shm.c files.  It turned out that moving these functions into
namespaces.c is not that easy because they use many other calls and macros
from the original file.  Moving them would make this patch complicated.  On
the other hand all these functions can be consolidated, so I will send a
separate patch doing this a bit later.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:23 -08:00
Pierre Peiffer b1ed88b47f IPC: fix error check in all new xxx_lock() and xxx_exit_ns() functions
In the new implementation of the [sem|shm|msg]_lock[_check]() routines, we
use the return value of ipc_lock() in container_of() without any check.
But ipc_lock may return a errcode.  The use of this errcode in
container_of() may alter this errcode, and we don't want this.

And in xxx_exit_ns, the pointer return by idr_find is of type 'struct
kern_ipc_per'...

Today, the code will work as is because the member used in these
container_of() is the first member of its container (offset == 0), the
errcode isn't changed then.  But in the general case, we can't count on
this assumption and this may lead later to a real bug if we don't correct
this.

Again, the proposed solution is simple and correct.  But, as pointed by
Nadia, with this solution, the same check will be done several times (in
all sub-callers...), what is not very funny/optimal...

Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:01 -08:00
Pierre Peiffer 283bb7fada IPC: fix error case when idr-cache is empty in ipcget()
With the use of idr to store the ipc, the case where the idr cache is
empty, when idr_get_new is called (this may happen even if we call
idr_pre_get() before), is not well handled: it lets
semget()/shmget()/msgget() return ENOSPC when this cache is empty, what 1.
does not reflect the facts and 2.  does not conform to the man(s).

This patch fixes this by retrying the whole process of allocation in this case.

Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:49 -07:00
Nadia Derbey 1b531f2136 ipc: remove unneeded parameters
Remvoe the unneeded parameters from ipc_checkid() and ipc_buildid()
interfaces.

Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:48 -07:00
Nadia Derbey 3e148c7993 fix idr_find() locking
This is a patch that fixes the way idr_find() used to be called in ipc_lock():
in all the paths that don't imply an update of the ipcs idr, it was called
without the idr tree being locked.

The changes are:
  . in ipc_ids, the mutex has been changed into a reader/writer semaphore.
  . ipc_lock() now takes the mutex as a reader during the idr_find().
  . a new routine ipc_lock_down() has been defined: it doesn't take the
    mutex, assuming that it is being held by the caller. This is the routine
    that is now called in all the update paths.

Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Acked-by: Jarek Poplawski <jarkao2@o2.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:48 -07:00
Nadia Derbey f4566f0485 ipc: fix wrong comments
This patch fixes the wrong / obsolete comments in the ipc code.  Also adds
a missing lock around ipc_get_maxid() in shm_get_stat().

Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:47 -07:00
Nadia Derbey 03f02c7657 Storing ipcs into IDRs
This patch converts casts of struct kern_ipc_perm to
   . struct msg_queue
   . struct sem_array
   . struct shmid_kernel
into the equivalent container_of() macro. It improves code maintenance
because the code need not change if kern_ipc_perm is no longer at the
beginning of the containing struct.

Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:46 -07:00
Nadia Derbey 023a53557e ipc: integrate ipc_checkid() into ipc_lock()
This patch introduces a new ipc_lock_check() routine interface:
   . each time ipc_checkid() is called, this is done after calling ipc_lock().
     ipc_checkid() is now called from inside ipc_lock_check().

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix RCU locking]
Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:44 -07:00
Nadia Derbey 637c366340 ipc: remove the ipc_get() routine
This is a trivial patch that removes the ipc_get() routine: it is replaced
by a call to idr_find().

Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:44 -07:00
Nadia Derbey 7748dbfaa0 ipc: unify the syscalls code
This patch introduces a change into the sys_msgget(), sys_semget() and
sys_shmget() routines: they now share a common code, which is better for
maintainability.

Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:44 -07:00
Nadia Derbey 7ca7e564e0 ipc: store ipcs into IDRs
This patch introduces ipcs storage into IDRs. The main changes are:
  . This ipc_ids structure is changed: the entries array is changed into a
    root idr structure.
  . The grow_ary() routine is removed: it is not needed anymore when adding
    an ipc structure, since we are now using the IDR facility.
  . The ipc_rmid() routine interface is changed:
       . there is no need for this routine to return the pointer passed in as
         argument: it is now declared as a void
       . since the id is now part of the kern_ipc_perm structure, no need to
         have it as an argument to the routine

Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:44 -07:00
Pavel Emelyanov b488893a39 pid namespaces: changes to show virtual ids to user
This is the largest patch in the set. Make all (I hope) the places where
the pid is shown to or get from user operate on the virtual pids.

The idea is:
 - all in-kernel data structures must store either struct pid itself
   or the pid's global nr, obtained with pid_nr() call;
 - when seeking the task from kernel code with the stored id one
   should use find_task_by_pid() call that works with global pids;
 - when showing pid's numerical value to the user the virtual one
   should be used, but however when one shows task's pid outside this
   task's namespace the global one is to be used;
 - when getting the pid from userspace one need to consider this as
   the virtual one and use appropriate task/pid-searching functions.

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: nuther build fix]
[akpm@linux-foundation.org: yet nuther build fix]
[akpm@linux-foundation.org: remove unneeded casts]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Paul Menage <menage@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:40 -07:00
Dave Hansen ce8d2cdf3d r/o bind mounts: filesystem helpers for custom 'struct file's
Why do we need r/o bind mounts?

This feature allows a read-only view into a read-write filesystem.  In the
process of doing that, it also provides infrastructure for keeping track of
the number of writers to any given mount.

This has a number of uses.  It allows chroots to have parts of filesystems
writable.  It will be useful for containers in the future because users may
have root inside a container, but should not be allowed to write to
somefilesystems.  This also replaces patches that vserver has had out of the
tree for several years.

It allows security enhancement by making sure that parts of your filesystem
read-only (such as when you don't trust your FTP server), when you don't want
to have entire new filesystems mounted, or when you want atime selectively
updated.  I've been using the following script to test that the feature is
working as desired.  It takes a directory and makes a regular bind and a r/o
bind mount of it.  It then performs some normal filesystem operations on the
three directories, including ones that are expected to fail, like creating a
file on the r/o mount.

This patch:

Some filesystems forego the vfs and may_open() and create their own 'struct
file's.

This patch creates a couple of helper functions which can be used by these
filesystems, and will provide a unified place which the r/o bind mount code
may patch.

Also, rename an existing, static-scope init_file() to a less generic name.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:43:04 -07:00
Adrian Bunk d823e3e754 ipc/shm.c: make 2 functions static
This patch makes two needlessly global functions static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:50 -07:00
Pavel Emelianov 7be77e20d5 Fix user struct leakage with locked IPC shem segment
When user locks an ipc shmem segmant with SHM_LOCK ctl and the segment is
already locked the shmem_lock() function returns 0.  After this the
subsequent code leaks the existing user struct:

== ipc/shm.c: sys_shmctl() ==
     ...
     err = shmem_lock(shp->shm_file, 1, user);
     if (!err) {
          shp->shm_perm.mode |= SHM_LOCKED;
          shp->mlock_user = user;
     }
     ...
==

Other results of this are:
1. the new shp->mlock_user is not get-ed and will point to freed
   memory when the task dies.
2. the RLIMIT_MEMLOCK is screwed on both user structs.

The exploit looks like this:

==
    id = shmget(...);
    setresuid(uid, 0, 0);
    shmctl(id, SHM_LOCK, NULL);
    setresuid(uid + 1, 0, 0);
    shmctl(id, SHM_LOCK, NULL);
==

My solution is to return 0 to the userspace and do not change the
segment's user.

Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:40 -07:00
David Howells 2e92a3baee NOMMU: Fix SYSV IPC SHM
Fix the SYSV IPC SHM to work with the changes applied by the new fault handler
patches when CONFIG_MMU=n.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:36 -07:00
Nick Piggin d0217ac04c mm: fault feedback #1
Change ->fault prototype.  We now return an int, which contains
VM_FAULT_xxx code in the low byte, and FAULT_RET_xxx code in the next byte.
 FAULT_RET_ code tells the VM whether a page was found, whether it has been
locked, and potentially other things.  This is not quite the way he wanted
it yet, but that's changed in the next patch (which requires changes to
arch code).

This means we no longer set VM_CAN_INVALIDATE in the vma in order to say
that a page is locked which requires filemap_nopage to go away (because we
can no longer remain backward compatible without that flag), but we were
going to do that anyway.

struct fault_data is renamed to struct vm_fault as Linus asked. address
is now a void __user * that we should firmly encourage drivers not to use
without really good reason.

The page is now returned via a page pointer in the vm_fault struct.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:41 -07:00
Nick Piggin 54cb8821de mm: merge populate and nopage into fault (fixes nonlinear)
Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes
the virtual address -> file offset differently from linear mappings.

->populate is a layering violation because the filesystem/pagecache code
should need to know anything about the virtual memory mapping.  The hitch here
is that the ->nopage handler didn't pass down enough information (ie.  pgoff).
 But it is more logical to pass pgoff rather than have the ->nopage function
calculate it itself anyway (because that's a similar layering violation).

Having the populate handler install the pte itself is likewise a nasty thing
to be doing.

This patch introduces a new fault handler that replaces ->nopage and
->populate and (later) ->nopfn.  Most of the old mechanism is still in place
so there is a lot of duplication and nice cleanups that can be removed if
everyone switches over.

The rationale for doing this in the first place is that nonlinear mappings are
subject to the pagefault vs invalidate/truncate race too, and it seemed stupid
to duplicate the synchronisation logic rather than just consolidate the two.

After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in
pagecache.  Seems like a fringe functionality anyway.

NOPAGE_REFAULT is removed.  This should be implemented with ->fault, and no
users have hit mainline yet.

[akpm@linux-foundation.org: cleanup]
[randy.dunlap@oracle.com: doc. fixes for readahead]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:41 -07:00
Cedric Le Goater 7d69a1f4a7 remove CONFIG_UTS_NS and CONFIG_IPC_NS
CONFIG_UTS_NS and CONFIG_IPC_NS have very little value as they only
deactivate the unshare of the uts and ipc namespaces and do not improve
performance.

Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Acked-by: "Serge E. Hallyn" <serue@us.ibm.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Pavel Emelianov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:47 -07:00
Eric W. Biederman 9d66586f77 shm: fix the filename of hugetlb sysv shared memory
Some user space tools need to identify SYSV shared memory when examining
/proc/<pid>/maps.  To do so they look for a block device with major zero, a
dentry named SYSV<sysv key>, and having the minor of the internal sysv
shared memory kernel mount.

To help these tools and to make it easier for people just browsing
/proc/<pid>/maps this patch modifies hugetlb sysv shared memory to use the
SYSV<key> dentry naming convention.

User space tools will still have to be aware that hugetlb sysv shared
memory lives on a different internal kernel mount and so has a different
block device minor number from the rest of sysv shared memory.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Albert Cahalan <acahalan@gmail.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-16 13:16:16 -07:00
Adam Litke 22741925d2 hugetlb: fix get_policy for stacked shared memory files
Here's another breakage as a result of shared memory stacked files :(

The NUMA policy for a VMA is determined by checking the following (in the
order given):

1) vma->vm_ops->get_policy() (if defined)
2) vma->vm_policy (if defined)
3) task->mempolicy (if defined)
4) Fall back to default_policy

By switching to stacked files for shared memory, get_policy() is now always
set to shm_get_policy which is a wrapper function.  This causes us to stop
at step 1, which yields NULL for hugetlb instead of task->mempolicy which
was the previous (and correct) result.

This patch modifies the shm_get_policy() wrapper to maintain steps 1-3 for
the wrapped vm_ops.

(akpm: the refcounting of mempolicies is busted and this patch does nothing to
improve it)

Signed-off-by: Adam Litke <agl@us.ibm.com>
Acked-by: William Irwin <bill.irwin@oracle.com>
Cc: dean gaudet <dean@arctic.org>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-16 13:16:16 -07:00
Badari Pulavarty 30475cc12a Restore shmid as inode# to fix /proc/pid/maps ABI breakage
shmid used to be stored as inode# for shared memory segments. Some of
the proc-ps tools use this from /proc/pid/maps.  Recent cleanups
to newseg() changed it.  This patch sets inode number back to shared
memory id to fix breakage.

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Cc: "Albert Cahalan" <acahalan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-16 13:16:15 -07:00
Adam Litke 516dffdcd8 [PATCH] Fix get_unmapped_area and fsync for hugetlb shm segments
This patch provides the following hugetlb-related fixes to the recent stacked
shm files changes:
 - Update is_file_hugepages() so it will reconize hugetlb shm segments.
 - get_unmapped_area must be called with the nested file struct to handle
   the sfd->file->f_ops->get_unmapped_area == NULL case.
 - The fsync f_op must be wrapped since it is specified in the hugetlbfs
   f_ops.

This is based on proposed fixes from Eric Biederman that were debugged and
tested by me.  Without it, attempting to use hugetlb shared memory segments
on powerpc (and likely ia64) will kill your box.

Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: William Irwin <bill.irwin@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 17:18:39 -08:00
Adrian Bunk de01bad2f5 [PATCH] make ipc/shm.c:shm_nopage() static
shm_nopage() can become static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 14:53:35 -08:00
Eric W. Biederman bc56bba8f3 [PATCH] shm: make sysv ipc shared memory use stacked files
The current ipc shared memory code runs into several problems because it
does not quite use files like the rest of the kernel.  With the option of
backing ipc shared memory with either hugetlbfs or ordinary shared memory
the problems got worse.  With the added support for ipc namespaces things
behaved so unexpected that we now have several bad namespace reference
counting bugs when using what appears at first glance to be a reasonable
idiom.

So to attack these problems and hopefully make the code more maintainable
this patch simply uses the files provided by other parts of the kernel and
builds it's own files out of them.  The shm files are allocated in do_shmat
and freed when their reference count drops to zero with their last unmap.
The file and vm operations that we don't want to implement or we don't
implement completely we just delegate to the operations of our backing
file.

This means that we now get an accurate shm_nattch count for we have a
hugetlbfs inode for backing store, and the shm accounting of last attach
and last detach time work as well.

This means that getting a reference to the ipc namespace when we create the
file and dropping the referenece in the release method is now safe and
correct.

This means we no longer need a special case for clearing VM_MAYWRITE
as our file descriptor now only has write permissions when we have
requested write access when calling shmat.  Although VM_SHARED is now
cleared as well which I believe is harmless and is mostly likely a
minor bug fix.

By using the same set of operations for both the hugetlb case and regular
shared memory case shmdt is not simplified and made slightly more correct
as now the test "vma->vm_ops == &shm_vm_ops" is 100% accurate in spotting
all shared memory regions generated from sysvipc shared memory.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20 17:10:13 -08:00
Arjan van de Ven 9a32144e9d [PATCH] mark struct file_operations const 7
Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:46 -08:00
Guy Streeter f66d45e99e [PATCH] correct sys_shmget allocation check
As written, sys_shmget will return ENOSPC when one page is still
available for allocation. This patch corrects the test.

Signed-off-by: Guy Streeter <guy.streeter+lkml@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
--
2007-01-23 11:18:50 -08:00
Josef Sipek 6d63079add [PATCH] struct path: convert ipc
Signed-off-by: Josef Sipek <jsipek@fsl.cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:46 -08:00
Pavel Emelianov c7e12b8389 [PATCH] Fix ipc entries removal
Fix two issuses related to ipc_ids->entries freeing.

1. When freeing ipc namespace we need to free entries allocated
   with ipc_init_ids().

2. When removing old entries in grow_ary() ipc_rcu_putref()
   may be called on entries set to &ids->nullentry earlier in
   ipc_init_ids().
   This is almost impossible without namespaces, but with
   them this situation becomes possible.

Found during OpenVZ testing after obvious leaks in beancounters.

Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Cc: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-03 12:27:56 -08:00
Kirill Korotaev 4e9823111b [PATCH] IPC namespace - shm
IPC namespace support for IPC shm code.

Signed-off-by: Pavel Emelianiov <xemul@openvz.org>
Signed-off-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:22 -07:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Hugh Dickins 185606fc6a [PATCH] remove unused o_flags from do_shmat
Remove the unused variable o_flags from do_shmat.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:51 -07:00
Linda Knippers ac03221a4f [PATCH] update of IPC audit record cleanup
The following patch addresses most of the issues with the IPC_SET_PERM
records as described in:
https://www.redhat.com/archives/linux-audit/2006-May/msg00010.html
and addresses the comments I received on the record field names.

To summarize, I made the following changes:

1. Changed sys_msgctl() and semctl_down() so that an IPC_SET_PERM
   record is emitted in the failure case as well as the success case.
   This matches the behavior in sys_shmctl().  I could simplify the
   code in sys_msgctl() and semctl_down() slightly but it would mean
   that in some error cases we could get an IPC_SET_PERM record
   without an IPC record and that seemed odd.

2. No change to the IPC record type, given no feedback on the backward
   compatibility question.

3. Removed the qbytes field from the IPC record.  It wasn't being
   set and when audit_ipc_obj() is called from ipcperms(), the
   information isn't available.  If we want the information in the IPC
   record, more extensive changes will be necessary.  Since it only
   applies to message queues and it isn't really permission related, it
   doesn't seem worth it.

4. Removed the obj field from the IPC_SET_PERM record.  This means that
   the kern_ipc_perm argument is no longer needed.

5. Removed the spaces and renamed the IPC_SET_PERM field names.  Replaced iuid and
   igid fields with ouid and ogid in the IPC record.

I tested this with the lspp.22 kernel on an x86_64 box.  I believe it
applies cleanly on the latest kernel.

-- ljk

Signed-off-by: Linda Knippers <linda.knippers@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20 05:25:24 -04:00
Steve Grubb 073115d6b2 [PATCH] Rework of IPC auditing
1) The audit_ipc_perms() function has been split into two different
functions:
        - audit_ipc_obj()
        - audit_ipc_set_perm()

There's a key shift here...  The audit_ipc_obj() collects the uid, gid,
mode, and SElinux context label of the current ipc object.  This
audit_ipc_obj() hook is now found in several places.  Most notably, it
is hooked in ipcperms(), which is called in various places around the
ipc code permforming a MAC check.  Additionally there are several places
where *checkid() is used to validate that an operation is being
performed on a valid object while not necessarily having a nearby
ipcperms() call.  In these locations, audit_ipc_obj() is called to
ensure that the information is captured by the audit system.

The audit_set_new_perm() function is called any time the permissions on
the ipc object changes.  In this case, the NEW permissions are recorded
(and note that an audit_ipc_obj() call exists just a few lines before
each instance).

2) Support for an AUDIT_IPC_SET_PERM audit message type.  This allows
for separate auxiliary audit records for normal operations on an IPC
object and permissions changes.  Note that the same struct
audit_aux_data_ipcctl is used and populated, however there are separate
audit_log_format statements based on the type of the message.  Finally,
the AUDIT_IPC block of code in audit_free_aux() was extended to handle
aux messages of this new type.  No more mem leaks I hope ;-)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-05-01 06:10:04 -04:00
Hugh Dickins b78b6af66a [PATCH] shmat: stop mprotect from giving write permission to a readonly attachment (CVE-2006-1524)
I found that all of 2.4 and 2.6 have been letting mprotect give write
permission to a readonly attachment of shared memory, whether or not IPC
would give the caller that permission.

SUS says "The behaviour of this function [mprotect] is unspecified if the
mapping was not established by a call to mmap", but I don't think we can
interpret that as allowing it to subvert IPC permissions.

I haven't tried 2.2, but the 2.2.26 source looks like it gets it right; and
the patch below reproduces that behaviour - mprotect cannot be used to add
write permission to a shared memory segment attached readonly.

This patch is simple, and I'm sure it's what we should have done in 2.4.0:
if you want to go on to switch write permission on and off with mprotect,
just don't attach the segment readonly in the first place.

However, we could have accumulated apps which attach readonly (even though
they would be permitted to attach read/write), and which subsequently use
mprotect to switch write permission on and off: it's not unreasonable.

I was going to add a second ipcperms check in do_shmat, to check for
writable when readonly, and if not writable find_vma and clear VM_MAYWRITE.
 But security_ipc_permission might do auditing, and it seems wrong to
report an attempt for write permission when there has been none.  Or we
could flag the vma as SHM, note the shmid or shp in vm_private_data, and
then get mprotect to check.

But the patch below is a lot simpler: I'd rather stick with it, if we can
convince ourselves somehow that it'll be safe.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-17 14:24:58 -07:00
Eric Sesterhenn 9ba025f108 BUG_ON() Conversion in ipc/shm.c
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-02 13:42:42 +02:00
Ingo Molnar 5f921ae96f [PATCH] sem2mutex: ipc, id.sem
Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:56:55 -08:00
Linus Torvalds 1b9a391736 Merge branch 'audit.b3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current
* 'audit.b3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: (22 commits)
  [PATCH] fix audit_init failure path
  [PATCH] EXPORT_SYMBOL patch for audit_log, audit_log_start, audit_log_end and audit_format
  [PATCH] sem2mutex: audit_netlink_sem
  [PATCH] simplify audit_free() locking
  [PATCH] Fix audit operators
  [PATCH] promiscuous mode
  [PATCH] Add tty to syscall audit records
  [PATCH] add/remove rule update
  [PATCH] audit string fields interface + consumer
  [PATCH] SE Linux audit events
  [PATCH] Minor cosmetic cleanups to the code moved into auditfilter.c
  [PATCH] Fix audit record filtering with !CONFIG_AUDITSYSCALL
  [PATCH] Fix IA64 success/failure indication in syscall auditing.
  [PATCH] Miscellaneous bug and warning fixes
  [PATCH] Capture selinux subject/object context information.
  [PATCH] Exclude messages by message type
  [PATCH] Collect more inode information during syscall processing.
  [PATCH] Pass dentry, not just name, in fsnotify creation hooks.
  [PATCH] Define new range of userspace messages.
  [PATCH] Filter rule comparators
  ...

Fixed trivial conflict in security/selinux/hooks.c
2006-03-25 09:24:53 -08:00
Hugh Dickins df1e2fb540 [PATCH] shmdt: check address alignment
SUSv3 says the shmdt() function shall fail with EINVAL if the value of
shmaddr is not the data segment start address of a shared memory segment:
our sys_shmdt needs to reject a shmaddr which is not page-aligned.

Does it have the potential to break existing apps?

Hugh says

  "sys_shmdt() just does the wrong (unexpected) thing with a misaligned
  address: it'll fail on what you might expect it to succeed on, and only
  succeed on what it should definitely fail on.

  "That is, I think it behaves as if shmaddr gets rounded up, when the only
  understandable behaviour would be if it rounded it down.

  "Which does mean you'd have to be devious to see anything but EINVAL from
  a misaligned shmaddr there, so it's not terribly important."

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:25 -08:00
Dustin Kirkland 8c8570fb8f [PATCH] Capture selinux subject/object context information.
This patch extends existing audit records with subject/object context
information. Audit records associated with filesystem inodes, ipc, and
tasks now contain SELinux label information in the field "subj" if the
item is performing the action, or in "obj" if the item is the receiver
of an action.

These labels are collected via hooks in SELinux and appended to the
appropriate record in the audit code.

This additional information is required for Common Criteria Labeled
Security Protection Profile (LSPP).

[AV: fixed kmalloc flags use]
[folded leak fixes]
[folded cleanup from akpm (kfree(NULL)]
[folded audit_inode_context() leak fix]
[folded akpm's fix for audit_ipc_perm() definition in case of !CONFIG_AUDIT]

Signed-off-by: Dustin Kirkland <dustin.kirkland@us.ibm.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-20 14:08:54 -05:00
KAMEZAWA Hiroyuki 8e36709d8c [PATCH] shmdt cannot detach not-alined shm segment cleanly.
sys_shmdt() can manage shm segments which are covered by multiple vmas.  (This
can happen when a user uses mprotect() after shmat().)

This works well if shm is aligned to PAGE_SIZE, but if not, the last
segment cannot be detached.  It is because a comparison in sys_shmdt()

	(vma->vm_end - addr) < size
		addr == return address of shmat()
		size == shmsize, argments to shmget()

size should be aligned to PAGE_SIZE before being compared with vma->vm_end,
which is aligned.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-10 08:13:12 -08:00
Randy.Dunlap c59ede7b78 [PATCH] move capable() to capability.h
- Move capable() from sched.h to capability.h;

- Use <linux/capability.h> where capable() is used
	(in include/, block/, ipc/, kernel/, a few drivers/,
	mm/, security/, & sound/;
	many more drivers/ to go)

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 18:42:13 -08:00
Andrew Morton b33291c0bc [PATCH] ipc: expand shm_flags
Unobfsucate this struct member

Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:49 -08:00
David Howells b0e15190ea [PATCH] NOMMU: Make SYSV IPC SHM use ramfs facilities on NOMMU
The attached patch makes the SYSV IPC shared memory facilities use the new
ramfs facilities on a no-MMU kernel.

The following changes are made:

 (1) There are now shmem_mmap() and shmem_get_unmapped_area() functions to
     allow the IPC SHM facilities to commune with the tiny-shmem and shmem
     code.

 (2) ramfs files now need resizing using do_truncate() rather than by modifying
     the inode size directly (see shmem_file_setup()). This causes ramfs to
     attempt to bind a block of pages of sufficient size to the inode.

 (3) CONFIG_SYSVIPC is no longer contingent on CONFIG_MMU.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:32 -08:00
Badari Pulavarty bf8f972d3a [PATCH] SHM_NORESERVE flags for shmget()
Add SHM_NORESERVE functionality similar to MAP_NORESERVE for shared memory
segments.

This is mainly to avoid abuse of OVERCOMMIT_ALWAYS and this flag is ignored
for OVERCOMMIT_NEVER.

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:37 -08:00
Krishnakumar R 551110a94a [PATCH] hugetlb: remove repeated code
Clean up some repeated code related to HugeTLB.  hugetlb_zero_setup would
have already allocated the file->f_op.

Signed-off-by: Krishnakumar. R <rkrishnakumar@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:43 -07:00
Mike Waychison 19b4946ca9 [PATCH] ipc: convert /proc/sysvipc/* to generic seq_file interface
Change the /proc/sysvipc/shm|sem|msg files to use the generic seq_file
implementation for struct ipc_ids.

Signed-off-by: Mike Waychison <mikew@google.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:26 -07:00
Andrew Morton 6ade43fbbc [PATCH] shm: CONFIG_SHMEM=n build fix
Fix bug found by Grant Coady <lkml@dodo.com.au>'s autobuild setup.

shmem_set_policy() and shmem_get_policy() are macros if !CONFIG_SHMEM, so this
doesn't work.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01 21:38:00 -07:00
Stephen Rothwell 7d87e14c23 [PATCH] consolidate sys_shmat
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:12 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00