Commit Graph

68 Commits

Author SHA1 Message Date
Jongpill Lee 37ea63b14b ARM: S5P: Add initial map for GPIO2 and GPIO3
This patch adds initial map for GPIO2 and GPIO3.
S5PV310/S5PC210 has separated GPIO1, GPIO2 and GPIO3.

Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:06:22 +09:00
Seungwhan Youn d4b34c6c84 ARM: S5P: Reduce duplicated EPLL control codes
S5P Samsung SoCs has a EPLL to support various PLL clock sources for other
H/W blocks. Until now, to control EPLL, each of SoCs make their own functions
in 'mach-s5pxxx/clock.c'. But some of functions, 'xxx_epll_get_rate()' and
'xxx_epll_enable()', are exactly same in all S5P SoCs, so this patch move
these duplicated codes to common EPLL functions that use platform wide.

Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:05:56 +09:00
Kukjin Kim dd56d2df56 ARM: S5P: Cleanup the S5P SoCs' VA address mapping
Basically S5P SoCs use the Samsung common VA address mapping where
plat-samsung and use plat-s5p's mapping also. The later is a little
mess. So this patch cleans it up.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:03:05 +09:00
Kukjin Kim dc6c0ca39d ARM: S5P: Fix missed IRQ_EINT_BIT()
When merged patches, missed IRQ_EINT_BIT() definition from commit ea31fd43
(ARM: S5PV210: Add Power Management Support). The IRQ_EINT_BIT() is used
in the Power Management operation (plat-samsung/pm.c).

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 15:51:33 +09:00
Jongpill Lee ea31fd4330 ARM: S5PV210: Add Power Management Support
This patch adds suspend-to-ram support for S5PV210.
Note. This patch is confirmed on SMDKV210 and SMDKC110 board.

Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21 07:54:57 +09:00
Marek Szyprowski 9adf5d222c ARM: S5P: Unify defines for both gpio interrupt types
Samsung S5P SoCs have the same interrupt type defines for both
external interrupts and gpio interrupts. This patch removes all
duplicates from S5PC100 and S5PV210 specific includes as well as
gpio interrupt code and put a common defines to plat/irqs.h
NOTE: Do not use this for S5P6440 and S5P6450.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: add note for S5P64X0]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21 07:54:57 +09:00
Joonyoung Shim 8ce14a221e ARM: SAMSUNG: Add common samsung_gpiolib_to_irq function
This patch adds a common callback for gpio_to_irq() for external and
gpio interrupts for Samsung SoCs.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
[kgene.kim@samsung.com: moved samsung_gpiolib_to_irq() for s3c24xx build]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21 07:54:57 +09:00
Marek Szyprowski 170a461770 ARM: S5P: Add common S5P GPIO Interrupt support
This patch adds common code to enable support of GPIO interrupt on
S5P SoCs.

The total number of GPIO pins is quite large on S5P SoCs. Registering
irq support for all of them would be a resource waste. Because of that
the interrupt support for standard GPIO pins is registered dynamically
by the s5p_register_gpio_interrupt() function.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: minor title fixes]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21 07:54:56 +09:00
Marek Szyprowski ca1931ca1e ARM: S5PV210: Enable USB HSOTG gadget build
Add the necessary definitions and mapping information to enable the
s3c-hsotg gadget to build.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21 07:54:56 +09:00
Thomas Abraham 658bf4bef8 ARM: S5P: Remove the unused clk_arm clock from plat-s5p
All the S5P series SoCs use the 'struct clksrc_clk' type to represent the
armclk. So the clk_arm clock instance available in the plat-s5p clock code
is not used in any of the S5P series SoCs.
This patch removes the unused clk_arm instance from plat-s5p clock code.

Reported-by: Jaecheol Lee <jc.lee@samsung.com>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21 07:54:55 +09:00
Jaecheol Lee 1d826d14cc ARM: S5PV210: Add DMC map_desc table for supporting DMC access
This patch adds DMC(DRAM Memory Controller) map_desc table.
Because some driver such as CPUFREQ need to access DMC register.

Signed-off-by: Jaecheol Lee <jc.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-21 07:52:17 +09:00
Kukjin Kim 2555e663b3 ARM: S5P64X0: Add UART serial support for S5P6450
This patch adds UART serial port support for S5P6450 SoC.
The S5P6450 has 6 UARTs, so adds resource of UART4 and UART5.
And to fix membase which is in serial/samsung.c is from Ben Dooks.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
2010-10-18 18:33:04 +09:00
Kukjin Kim 3109e55099 ARM: S5P64X0: Update Clock for S5P6440 and S5P6450
This patch updates regarding clock files for supporting S5P6440 and
S5P6450 with one kernel image. The mach-s5p64x0/clock.c is for common
of them and there are specific clock files for each SoCs.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18 18:33:02 +09:00
Kukjin Kim a2e0d6249f ARM: S5P64X0: Add S5P64X0(S5P6440 and S5P6450) initialization support
This patch adds ARCH_S5P64X0 which can support S5P6440 and S5P6450 with
one kernel image. So moved some files of mach-s5p6440 into the new ARCH
directory mach-s5p64x0.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18 18:29:51 +09:00
Kukjin Kim 49b7a491b7 ARM: S5P64X0: Update Kconfig and Makefile
This patch updates the Kconfig and Makefile for the S5P6440 and S5P6450
machines. It also updates arch/arm/ Kconfig and Makefile to include for
support ARCH_S5P64X0 with one kernel image.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18 10:33:34 +09:00
Kukjin Kim 19a2c06548 ARM: S5P: Moves initial map for merging S5P64X0
This patch moves some initial maps from plat-s5p to machine,
so that can merge mach-s5p6440 and mach-s5p6450.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-18 10:33:34 +09:00
Kukjin Kim 13904fba37 ARM: S5P: Move OneNAND device definitions in plat-s5p
This patch moves OneNAND device definitions from mach-s5pv210 to plat-s5p
so that can support it commonly.

Note: S5PC110 and S5PC210 have same OneNAND driver.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
2010-10-18 10:33:34 +09:00
Sylwester Nawrocki 80e2f36aab ARM: S5P: Decrease IO Registers memory region size on FIMC
IO registers region size of all FIMC versions is less than 1kB so there
is no need to reserve 1M.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
[kgene.kim@samsung.com: minor title fix]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-09-14 17:57:55 +09:00
Marek Szyprowski 0fe7f88504 ARM: S5P: Fix DMA coherent mask for FIMC
FIMC driver uses DMA_coherent allocator, which requires proper dma mask
to be set.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: minor title fix]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-09-14 17:57:39 +09:00
Changhwan Youn 766211e748 ARM: S5PV310: Fix on Secondary CPU startup
Following occurs on boot message without this patch.
    CPU1: processor failed to boot
    Brought up 1 CPUs
    SMP: Total of 1 processors activated...

This patch adds SYSRAM mapping for fixing Secondary CPU startup.
    CPU1: Booted secondary processor
    Brought up 2 CPUs
    SMP: Total of 2 processors activated...

Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27 18:29:58 +09:00
Kukjin Kim c598c47d85 ARM: S5PV310: Add CMU block for S5PV310 Clock
This patch adds CMU block for S5PV310/S5PC210 clock.
(CMU: Clock Management Unit)
Of course, changed current clock addresses for it together.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27 18:04:37 +09:00
Kukjin Kim 25da496f39 ARM: S5P: Fix on missing S5P_DEV_FIMC in plat-s5p/Kconfig
This patch fixes on missing S5P_DEV_FIMC in plat-s5p/Kconfig.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-09 18:26:13 +09:00
Kukjin Kim d61bd77ff1 Merge branch 'next-samsung' into for-next
Conflicts:
	arch/arm/mach-s5p6440/Kconfig
	arch/arm/mach-s5p6442/Kconfig
	arch/arm/mach-s5pc100/Kconfig
	arch/arm/mach-s5pv210/Kconfig
	arch/arm/mach-s5pv210/cpu.c
	arch/arm/plat-samsung/include/plat/sdhci.h
2010-08-06 21:49:18 +09:00
Kukjin Kim f2b7e3c54a Merge branch 'next-s5p' into for-next
Conflicts:
	arch/arm/mach-s5pv210/mach-aquila.c
	arch/arm/mach-s5pv210/mach-goni.c
2010-08-06 21:34:55 +09:00
Sylwester Nawrocki 33c14ff838 ARM: SAMSUNG: Add platform definitions and helpers for FIMC driver
FIMC (CAMIF) device is a camera interface embedded in S3C/S5P Samsung
SOC series. It supports ITU-R BT.601/656 and MIPI-CSI2 standards,
memory to memory operations, color conversion, resizing and rotation.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-06 21:28:35 +09:00
Changhwan Youn cc0e72b87a ARM: S5PV310: Add new Kconfig and Makefiles
This patch adds the Kconfig and Makefile for the new S5PV310 SoC.
It also updates arch/arm Kconfig, Makefile and arch/arm/mm/Kconfig
to include support for the new S5PV310.

Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-05 18:32:42 +09:00
Changhwan Youn cfca3a619b ARM: S5PV310: Add Timer support
This patch adds timer support for S5PV310.  Until now, all S5P SoCs
use CONFIG_ARCH_USES_GETTIMEOFFSET macro as a default configuration.
Instead,S5PV310 implements clocksource and clock_event_device to
support the high resolution timer and tickless system.

Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Hyuk Lee <hyuk1.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-05 18:32:42 +09:00
Changhwan Youn 84bbc16c1f ARM: S5PV310: Add IRQ support
This patch adds IRQ support for S5PV310.
ARM GIC is installed in S5PV310 instead of VIC which is in every other CPUs
in S5P series. Several irq combiners are used to resolve the lack of irq
lines in current implementation.

Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Hyuk Lee <hyuk1.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-05 18:32:41 +09:00
Changhwan Youn c8bef14051 ARM: S5PV310: Add Clock and PLL support
This patch adds clock and pll support for S5PV310.

Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-05 18:32:41 +09:00
Changhwan Youn 2b12b5c4ff ARM: S5PV310: Add new CPU initialization support
This patch adds Samsung S5PV310/S5PC210 CPU support.
The S5PV310/S5PC210 integrates a ARM Cortex A9 multi-core.

Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Jiseong Oh <jiseong.oh@samsung.com>
[kgene.kim@samsung.com: fix build errors]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-05 18:32:41 +09:00
Changhwan Youn 88baf2096c ARM: S5P: Remove fixed uart offset dependent code
The uart offset between channels has been 0x400 for all S5P series
and to present virtual and physical offsets, both number 0x400 and
S3C_UART_OFFSET have been used together.
This patch removes the use of the number 0x400 and expands the virtual
mapping size of S3C_VA_UART from 4KB to 512KB to support the CPU with
S3C_UART_OFFSET being 0x10000.

Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-05 18:32:41 +09:00
Jongpill Lee 0fdb480e7f ARM: S5P: Add s5p_reset_hook() for perform reset using SWRESET on S5P SoCs
This patch adds s5p_reset_hook() which includes software reset
by using SWRESET.

Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-05 18:30:22 +09:00
Jongpill Lee d7f1e82ac9 ARM: S5P: Add System define for arch_reset()
This patch adds system define for arch_reset() using Watchdog reset.
And adds IO mapping for using WDT.

Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-05 18:30:22 +09:00
Joonyoung Shim 02a0456b3b ARM: S5P: Add PMU device
This patch adds an initcall for the s5p platforms so that they register
their PMU IRQs with the PMU framework in the Kernel.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-05 18:30:21 +09:00
Boojin Kim 79fc72d6d3 ARM: S5P: Bug fix on external interrupt for S5P SoCs
This patch fixes bug on eint type set function, s5p_irq_eint_set_type().
In the IRQ_TYPE_EDGE_FALLING case, S5P_EXTINT_FALLEDGE is right
instead of S5P_EXTINT_RISEEDGE

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-07-05 16:01:04 +09:00
Thomas Abraham 8fb9d2d72e ARM: S5P: Regoster clk_xusbxti clock for hsotg driver
The clk_xusbxti clock is added to the list of clocks to be
registred during boot time clock registration.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
[ben-linux@fluff.org: edited title]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28 19:31:34 +09:00
Pannaga Bhushan 5fae405838 ARM: S5P: Fix the platform external interrupt issues.
This patch does the following:

1. Corrects the common platform code for external interrupts for using the
   VIC mask/unmask bits also.
2. Moves the common defines related to external interrupt for plat-s5p
   to common files.
3. Based on the new common defines, corresponding changes are made in the
   affected platforms (S5P6440, S5P6442 and S5PC100).

Signed-off-by: Pannaga Bhushan <p.bhushan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-26 19:09:50 +09:00
Ben Dooks 3d5c1fdcaa ARM: SAMSUNG: Fixup merge problem
Fixup merge which re-introduced the setup-i2c0 helper

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-20 20:49:25 +09:00
Ben Dooks d48562abe2 ARM: Merge for-2635-4/s5pc1xx-removal
Merge branch 'for-2635-4/s5pc1xx-removal' into for-2635-4/partial1
2010-05-20 18:51:31 +09:00
Marek Szyprowski acc84707d3 ARM: SAMSUNG: move S5PC100 support from plat-s5pc1xx to plat-s5p framework
This patch moves S5PC100 SoC support to plat-s5p framework. Most
periperal support code has been already moved from plat-s5pc1xx to
mach-s5pc100.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-20 15:28:32 +09:00
Jongpill Lee 0df04f820b ARM: S5PV210: Add IRQ_EINT interrupt support.
Add support for external interrupts on S5PV210.

Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Pannaga Bhushan <p.bhushan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
[ben-linux@fluff.org: Ext => IRQ_EINT in title]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-20 14:21:21 +09:00
Thomas Abraham a443a6373d ARM: S5PC100: Pre-requisite clock patch for plat-s5pc1xx to plat-s5p move
This is a pre-requisite clock patch for the plat-s5pc1xx to plat-s5p
movement. The patches that perform the movement of the code from
plat-s5pc1xx to plat-s5p (and mach-s5pc100) should also enable the
build for the mach-s5pc100/clock.c code.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19 18:22:47 +09:00
Marek Szyprowski a0f735812e ARM: SAMSUNG: Copy common I2C0 device helpers to machine directories
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19 18:16:04 +09:00
Marek Szyprowski 838c6d499b ARM: SAMSUNG: move driver strength gpio configuration helper to common dir
Driver strength parameter can be changed not only on S5PC100 but also
on S5PV210/S5PC110 platforms, so move the helper functions to the common
plat-samsung directory.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19 18:15:02 +09:00
Ben Dooks 6071399674 ARM: Merge for-2635/s5pv210-clock
Merge branch 'for-2635/s5pv210-clock' into for-linus/samsung2
2010-05-19 18:04:10 +09:00
Ben Dooks 71b4439657 ARM: Merge for-2635/samsung-clock
Merge branch 'for-2635/samsung-clock' into for-linus/samsung2
2010-05-19 18:04:06 +09:00
Marek Szyprowski 1131379b48 ARM: SAMSUNGy: fix broken timer irq base
Timer interrupts range was defined as 43-47, what overlaps with VIC0 range
(32-64). This was caused probably by a typo while the common interrupts
definition was refactored. This patch moves timer interrupt range to safe
area of 11-15 (just before uart range).

This fixes the commit 87aef30eb3
("ARM: S5P: Change S5P_TIMER_IRQ based to 11 for SAMSUNG S5P series.")
which meant to move these into the old (and previously reserved)
ISA space.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[ben-linux@fluff.org: update description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19 18:01:25 +09:00
Thomas Abraham f445dbd5af ARM: S5PV210: Add support for VPLL
This patch adds the following.

1. Adds 'clk_sclk_hdmi27m' clock to represent the HDMI 27MHz clock.
2. Adds 'clk_vpllsrc; clock of type clksrc_clk to represent the
   input clock for VPLL.
3. Adds 'clk_sclk_vpll' clock of type clksrc_clk to represent the
   output of the MUX_VPLL mux.
4. Add clk_sclk_hdmi27m, clk_vpllsrc and clk_sclk_vpll to the list
   of clocks to be registered.
5. Adds boot time print of 'clk_sclk_vpll' clock rate.
6. Adds 'clk_fout_vpll' clock to plat-s5p such that it is reusable
   on other s5p platforms.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-17 10:37:37 +09:00
Thomas Abraham f001d5b28b ARM: S5P: Add USB External Crystal clock definition
Add USB external crystal clock definition Xusbxti to common S5P clock code.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-11 09:55:44 +09:00
Kukjin Kim 170f4e4258 ARM: S5PV210: Update Kconfig and Makefiles
Updates arch/arm Kconfig and Makefile for building the S5PV210 support.
Also modifies the plat-s5p Kconfig file to include the support for plat-s5p
for S5PV210.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-24 22:47:23 +00:00