Commit Graph

18 Commits

Author SHA1 Message Date
Paul Mundt a0ab36689a sh: fixed PMB mode refactoring.
This introduces some much overdue chainsawing of the fixed PMB support.
fixed PMB was introduced initially to work around the fact that dynamic
PMB mode was relatively broken, though they were never intended to
converge. The main areas where there are differences are whether the
system is booted in 29-bit mode or 32-bit mode, and whether legacy
mappings are to be preserved. Any system booting in true 32-bit mode will
not care about legacy mappings, so these are roughly decoupled.

Regardless of the entry point, PMB and 32BIT are directly related as far
as the kernel is concerned, so we also switch back to having one select
the other.

With legacy mappings iterated through and applied in the initialization
path it's now possible to finally merge the two implementations and
permit dynamic remapping overtop of remaining entries regardless of
whether boot mappings are crafted by hand or inherited from the boot
loader.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-13 18:31:48 +09:00
Paul Mundt c7b16efb7d sh: Add support for LZO-compressed kernels.
Plugs in LZO along with the others.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-13 13:29:19 +09:00
Magnus Damm 9e24c7e2ac sh: add uImage.bin target
Add an uImage.bin target to allow uncompressed uImages.
Useful for boards with busted u-boot decompression like
the rsk7203 on my desk.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 19:46:25 +09:00
Magnus Damm 3c928320b2 sh: romImage support V2
This patch contains support for the romImage build target V2.

The resulting romImage file should be burned to rom
or flash and could be used as small boot loader.

Board code should keep their setup code in the file
romimage.h located in their mach include directory.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-30 00:24:03 +09:00
Paul Mundt ef9b542fce sh: bzip2/lzma uImage support.
This builds on the bzip2/lzma zImage support change and wires it up for
uImages. Based on the blackfin implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-21 17:24:36 +09:00
Paul Mundt b208835624 sh: Provide a BITS definition, use it in the arch/sh/boot/ Makefiles.
This introduces a BITS export that can handily be picked up by Makefiles
for cleaner sharing. Reflect its use in arch/sh/boot/compressed/ in
preparation for unifying the Makefiles.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-10 00:55:45 +09:00
Yoshihiro Shimoda 2f47f44790 sh: Support fixed 32-bit PMB mappings from bootloader.
This provides a method for supporting fixed PMB mappings inherited from
the bootloader, as an alternative to the dynamic PMB mapping currently
used by the kernel. In the future these methods will be combined.

P1/P2 area is handled like a regular 29-bit physical address, and local
bus device are assigned P3 area addresses.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10 15:49:54 +09:00
Chris Smith 664718a343 sh: Fix uImage load address in 32-bit mode.
Fix "make uImage" load and entry addresses in 32-bit mode.

Signed-off-by: Chris Smith <chris.smith@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08 10:35:04 +09:00
Paul Mundt d27e0854d5 sh: Stub in a dummy ENTRY_OFFSET for uImage offset calculation.
If none is defined, provide a sane default, as we do for the other
options.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29 09:15:01 +09:00
Yoshihiro Shimoda 82cb1f6fb3 sh: fix uImage Entry Point
fix the problem that cannot boot using uImage when PAGE_SIZE is
8kbyte or 64kbyte.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:16:41 +09:00
Yoshihiro Shimoda 26b63e9951 sh: Fix up uImage compression type
Fix up uImage compression type.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-31 16:17:11 +09:00
Paul Mundt 66b5bf4216 sh: Fix uImage build error.
The printf string was broken in the same way the zImage one was before,
though the uImage managed to avoid getting fixed at that time. Do so now.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-14 17:19:38 +09:00
Paul Mundt 6fc5153aab sh: Fix up KERNEL_ENTRY calculation for uImage.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:01 +09:00
Thomas Betker 453ec9c1c3 sh: Fix up uImage target entry point.
This patch changes the uImage target so that it generates a wrapped
compressed vmlinux, rather than a wrapped zImage. The previous version
matched the ARM, this version matches the PPC. However I would question
how useful a self decompressing image is with a boot loader which does
decompression, so I think this is more useful. I also feel it matches
the descrition in the help text ("Compressed kernel image") better.

Signed-off-by: Thomas Betker <thomas.betker@5etech.eu>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:59 +09:00
Nobuhiro Iwamatsu f7b6130e73 sh: Fix compression method when making uImage.
When uImage is made by using 'make uImage', zImage is used.
If zImage is used, the compression method need not be set.
However, it is set for "gzip" for a compression method.
I corrected to set "none".

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:13:54 +09:00
David McCullough 1f25756a11 sh: arch/sh/boot - fix shell usage
Fix the shell call to explicitly use bash, since they are bash
specific and not all systems have bash as the default.

Signed-off-by: David McCullough <david_mccullough@au.securecomputing.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26 17:43:41 +09:00
Paul Mundt cf00e20444 sh: Add uImage and S-rec generation support.
Add a couple of new targets, both for uImage and S-rec generation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:07 +09:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00