Commit Graph

530 Commits

Author SHA1 Message Date
Takashi Iwai 808c569f36 ALSA: Remove warning message for invalid OSS minor ranges
When a card instance with a higher card number is registered, warning
messages are spewed eventually with stack traces due to the invalid minor
number for OSS device registration.  For example, thinkpad-acpi registers
the card number 29 as default, and you'll see always these messages.
This is rather confusing (and worries users), thus better to return
simply the error code.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-18 14:18:55 +01:00
Thadeu Lima de Souza Cascardo c181a13a41 ALSA: use subsys_initcall for sound core instead of module_init
This is needed for built-in drivers which are built before the sound directory,
like thinkpad_acpi.

Otherwise, registering a card fails.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-14 21:21:47 +01:00
Guennadi Liakhovetski 8b90ca0882 ALSA: Fix indentation in pcm_native.c
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-25 14:12:52 +01:00
Florian Fainelli a9605391cf ALSA: sound/core/pcm_timer.c: use lib/gcd.c
Make sound/core/pcm_timer.c use lib/gcd.c

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-22 08:24:35 +01:00
Krzysztof Helt 40962d7c74 ALSA: fix incorrect rounding direction in snd_interval_ratnum()
The direction of rounding is incorrect in the snd_interval_ratnum()
It was detected with following parameters (sb8 driver playing
8kHz stereo file):
 - num is always 1000000
 - requested frequency rate is from 7999 to 7999 (single frequency)

The first loop calculates div_down(num, freq->min) which is 125.
Thus, a frequency range's minimum value is 1000000 / 125 = 8000 Hz.
The second loop calculates div_up(num, freq->max) which is 126
The frequency range's maximum value is 1000000 / 126 = 7936 Hz.
The range maximum is lower than the range minimum so the function
fails due to empty result range.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-21 12:02:55 +01:00
Linus Torvalds 6eb7365db6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Overwrite pin config on intel DG45ID board.
  intelhdmi - dont power off HDA link
  ALSA: hrtimer - Fix lock-up
  ALSA: intelhdmi - add channel mapping for typical configurations
  ALSA: intelhdmi - channel mapping applies to Pin
  ALSA: intelhdmi - accept DisplayPort pin
  ALSA: hda - show HBR(High Bit Rate) pin cap in procfs
  ALSA: hda - Fix LED GPIO setup for HP laptops with IDT codecs
  ASoC: Fix build of OMAP sound drivers
  ALSA: opti93x: fix irq releasing if the irq cannot be allocated
2009-12-12 11:40:50 -08:00
Takashi Iwai fcfdebe707 ALSA: hrtimer - Fix lock-up
The timer stop callback can be called from snd_timer_interrupt(), which
is called from the hrtimer callback.  Since hrtimer_cancel() waits for
the callback completion, this eventually results in a lock-up.

This patch fixes the problem by just toggling a flag at stop callback
and call hrtimer_cancel() later.

Reported-and-tested-by: Wojtek Zabolotny <W.Zabolotny@elka.pw.edu.pl>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-11 12:53:27 +01:00
Christoph Hellwig 6b2f3d1f76 vfs: Implement proper O_SYNC semantics
While Linux provided an O_SYNC flag basically since day 1, it took until
Linux 2.4.0-test12pre2 to actually get it implemented for filesystems,
since that day we had generic_osync_around with only minor changes and the
great "For now, when the user asks for O_SYNC, we'll actually give
O_DSYNC" comment.  This patch intends to actually give us real O_SYNC
semantics in addition to the O_DSYNC semantics.  After Jan's O_SYNC
patches which are required before this patch it's actually surprisingly
simple, we just need to figure out when to set the datasync flag to
vfs_fsync_range and when not.

This patch renames the existing O_SYNC flag to O_DSYNC while keeping it's
numerical value to keep binary compatibility, and adds a new real O_SYNC
flag.  To guarantee backwards compatiblity it is defined as expanding to
both the O_DSYNC and the new additional binary flag (__O_SYNC) to make
sure we are backwards-compatible when compiled against the new headers.

This also means that all places that don't care about the differences can
just check O_DSYNC and get the right behaviour for O_SYNC, too - only
places that actuall care need to check __O_SYNC in addition.  Drivers and
network filesystems have been updated in a fail safe way to always do the
full sync magic if O_DSYNC is set.  The few places setting O_SYNC for
lower layers are kept that way for now to stay failsafe.

We enforce that O_DSYNC is set when __O_SYNC is set early in the open path
to make sure we always get these sane options.

Note that parisc really screwed up their headers as they already define a
O_DSYNC that has always been a no-op.  We try to repair it by using it for
the new O_DSYNC and redefinining O_SYNC to send both the traditional
O_SYNC numerical value _and_ the O_DSYNC one.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger@sun.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2009-12-10 15:02:50 +01:00
Takashi Iwai 57648cd52b Merge branch 'topic/misc' into for-linus 2009-12-04 16:22:37 +01:00
Takashi Iwai b00615d163 Merge branch 'topic/pcm-dma-fix' into topic/core-change 2009-12-01 15:58:15 +01:00
Takashi Iwai 75639e7ee1 Merge branch 'topic/beep-rename' into topic/core-change 2009-12-01 15:58:10 +01:00
Takashi Iwai 6985c8877a ALSA: pcm - fix page conversion on non-coherent PPC arch
The non-cohernet PPC arch doesn't give the correct address by a simple
virt_to_page() for pages allocated via dma_alloc_coherent().
This patch adds a hack to fix the conversion similarly like MIPS.

Note that this doesn't fix perfectly: the pages should be marked with
proper pgprot value.  This will be done in a future implementation like
the conversion to dma_mmap_coherent().

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-27 10:15:23 +01:00
Takashi Iwai 66b6cfacfc ALSA: pcm - fix page conversion on non-coherent MIPS arch
The non-coherent MIPS arch doesn't give the correct address by a simple
virt_to_page() for pages allocated via dma_alloc_coherent().

Original patch by Wu Zhangjin <wuzj@lemote.com>.
[Ralf mentioned: "The origins of this patch go back far further.
 The oldest patch I could find which is a superset of this was written
 by Atsushi Nemoto and various incarnations of it have been sumitted
 to and reject by me a number of times through the years."]
A proper check of the buffer allocation type was added to avoid the
wrong conversion.

Note that this doesn't fix perfectly: the pages should be marked with
proper pgprot value.  This will be done in a future implementation like
the conversion to dma_mmap_coherent().

Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-27 10:12:40 +01:00
Takashi Iwai 9eb4a06788 ALSA: pcm - define snd_pcm_default_page_ops()
Add a helper (inline) function as the default page ops.  Any hacks wrt
the page address conversion will be applied in this function.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-26 15:07:21 +01:00
Takashi Iwai 657b1989da ALSA: pcm - Use dma_mmap_coherent() if available
Use dma_mmap_coherent() for mmapping the buffers allocated via
dma_alloc_coherent() if available.  Currently, only ARM has this function,
so we do temporarily have an ifdef pcm_native.c.  This should be handled
better globally in future.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-26 15:07:14 +01:00
Dan Carpenter bec145ae6f ALSA: remove unnecessary null check
This function is only called from snd_ctl_ioctl() and the file parameter
can never be null so there is no need to check it here.

We dereference file at the start of the function:
        struct snd_card *card = file->card;
and it confuses static checkers to dereference a pointer before
checking it.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18 09:59:40 +01:00
Takashi Iwai 0c3c35e148 Merge branch 'fix/misc' into topic/misc 2009-11-14 14:38:28 +01:00
Clemens Ladisch 7584af10cf sound: rawmidi: record a substream's owner process
Record the pid of the task that opened a RawMIDI substream.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-10 16:32:38 +01:00
Clemens Ladisch e7373b702f sound: pcm: record a substream's owner process
Record the pid of the task that opened a PCM substream. For sound
cards with hardware mixing, this allows determining which process
is associated with a specific substream's volume control.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-10 16:32:20 +01:00
Clemens Ladisch 91d12c485b sound: rawmidi: fix opened substreams count
The substream_opened field is to count the number of opened substreams,
not the number of times that any substreams have been opened.

Furthermore, all substreams being opened does not imply that the next
open would fail, due to the possibility of O_APPEND.  With this wrong
check, opening a substream multiple times would succeed only if the
device had more unopened substreams.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-10 16:32:10 +01:00
Takashi Iwai 3f225c07c7 Merge branch 'topic/ctl-pid-lock' into topic/core-change 2009-11-10 16:30:03 +01:00
Clemens Ladisch b7fe750fcc sound: rawmidi: fix MIDI device O_APPEND error handling
Commit 9a1b64caac in 2.6.30 broke the
error handling code in rawmidi_open_priv().

If only the output substream of a RawMIDI device has been opened and
if this device is then opened with O_RDWR | O_APPEND and if the
initialization of the input substream fails (either because of low
memory or because the device driver's open callback fails), then the
runtime structure of the already open output substream will be freed
and all following writes through the first handle will cause
snd_rawmidi_write() to use the NULL runtime pointer.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-10 16:22:59 +01:00
Clemens Ladisch 16fb109644 sound: rawmidi: fix checking of O_APPEND when opening MIDI device
Commit 9a1b64caac in 2.6.30 dropped the
check that a substream must already have been opened with O_APPEND to be
able to open it a second time.

This would make it possible for a substream to be switched to append
mode, which would mean that non-atomic writes would fail unexpectedly.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-10 16:21:30 +01:00
Clemens Ladisch 8579d2d777 sound: rawmidi: fix double init when opening MIDI device with O_APPEND
Commit 9a1b64caac in 2.6.30 moved the
substream initialization code to where it would be executed every time
the substream is opened.

This had the consequence that any further opening would drop and leak
the data in the existing buffer, and that the device driver's open
callback would be called multiple times, unexpectedly.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-10 16:20:43 +01:00
Clemens Ladisch 25d27eded1 control: use reference-counted pid
Instead of storing the PID number, take a reference to the task's pid
structure.  This protects against duplicates due to PID overflows, and
using pid_vnr() ensures that the PID returned by snd_ctl_elem_info() is
correct as seen from the current namespace.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-06 14:32:06 +01:00
Clemens Ladisch 31cef7076e control: remove snd_konctrol_volatile::owner_pid field
We do not need to save the ID of the process that locked a control
because that information is already available in the owner's file data.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-06 14:32:03 +01:00
Jaroslav Kysela ad1cd74506 ALSA: rename "PC Speaker" controls to "Speaker"
To unify control names, rename "PC Speaker" to "Speaker" for PPC ALSA drivers.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-05 09:00:21 +01:00
Jaroslav Kysela d355c82a01 ALSA: rename "PC Speaker" and "PC Beep" controls to "Beep"
To avoid confusion in control names for the standard analog PC Beep generator
using a small Internal PC Speaker, rename all related "PC Speaker" and "PC
Beep" controls to "Beep" only. This name is more universal and can be also
used on more platforms without confusion.

Introduce also "Internal Speaker" in ControlNames.txt for systems with
full-featured build-in internal speaker.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-05 09:00:18 +01:00
Takashi Iwai e87a3dd33e Merge branch 'fix/misc' into topic/misc 2009-11-01 11:11:07 +01:00
Julia Lawall 4b3be6afa4 ALSA: sound: Move dereference after NULL test and drop unnecessary NULL tests
In pcm.c, if the NULL test on pcm is needed, then the dereference should be
after the NULL test.

In dummy.c and ali5451.c, the context of the calls to
snd_card_dummy_new_mixer and snd_ali_free_voice show that dummy and pvoice,
respectively cannot be NULL.

A simplified version of the semantic match that detects this problem is as
follows (http://coccinelle.lip6.fr/):

// <smpl>
@match exists@
expression x, E;
identifier fld;
@@

* x->fld
  ... when != \(x = E\|&x\)
* x == NULL
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-30 12:01:27 +01:00
Krzysztof Helt 8066e51ae7 ALSA: snd_dma_pointer workaround for chipsets with buggy DMA
The chipsets with the isa_dma_bridge_buggy set do not stop DMA during
DMA counter reads. The DMA counter is read in two 8-bit read steps
on x86 platform. Sometimes, such reads happen during higher byte
change so the lower byte is already decremented (rolled over) but
the higher byte is not. It introduces an error that position is
moved 256 bytes ahead of the true position. Thus, the next DMA
position read can return a lower value then the previous read.
If the DMA position is decreased (reversed) the ALSA subsystem is
tricked into the playback underrun error and resets the playback.
It results in a "pop" during a playback.

Work around the issue by reading the counter twice and choosing a higher
value.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-11 18:03:13 +02:00
Alexey Dobriyan f0f37e2f77 const: mark struct vm_struct_operations
* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code

But leave TTM code alone, something is fishy there with global vm_ops
being used.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-27 11:39:25 -07:00
Takashi Iwai d3a7dcfeeb ALSA: pcm - Simplify snd_pcm_drain() implementation
Simplify snd_pcm_drain() implementation and avoid unneeded array-
allocation for waitqueues.  Instead, one waitqueue is used for the
first draining stream, and wait until all streams finished.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-21 15:13:09 +02:00
Takashi Iwai b34c866394 Merge branch 'topic/tlv-minmax' into for-linus
* topic/tlv-minmax:
  ALSA: usb-audio - Correct bogus volume dB information
  ALSA: usb-audio - Use the new TLV_DB_MINMAX type
  ALSA: Add new TLV types for dBwith min/max
2009-09-10 15:33:06 +02:00
Takashi Iwai 9d416811f8 Merge branch 'topic/snd-printk' into for-linus
* topic/snd-printk:
  ALSA: Fixed a typo of printk()
  ALSA: Add debug module option
  ALSA: core - strip too long file names in snd_print*()
2009-09-10 15:33:03 +02:00
Takashi Iwai df9200dd04 Merge branch 'topic/pcm-estrpipe-in-pm' into for-linus
* topic/pcm-estrpipe-in-pm:
  ALSA: pcm - Tell user that stream to be rewound is suspended
2009-09-10 15:33:02 +02:00
Takashi Iwai 2c0d19a78d Merge branch 'topic/pcm-drain-nonblock' into for-linus
* topic/pcm-drain-nonblock:
  ALSA: pcm - Increase protocol version
  ALSA: pcm - Fix drain behavior in non-blocking mode
2009-09-10 15:33:00 +02:00
Takashi Iwai fa28519002 Merge branch 'topic/oss' into for-linus
* topic/oss:
  ALSA: allocation may fail in	snd_pcm_oss_change_params()
  sound: vwsnd: Fix setting of cfgval and ctlval in li_setup_dma()
  sound: fix OSS MIDI output data loss
2009-09-10 15:32:58 +02:00
Takashi Iwai 9cd9f42767 Merge branch 'topic/misc' into for-linus
* topic/misc:
  ALSA: Remove unneeded ifdef from sound/core.h
  ALSA: Remove struct snd_monitor_file from public sound/core.h
  ALSA: Release v1.0.21
2009-09-10 15:32:57 +02:00
Takashi Iwai 0f23c5cc50 Merge branch 'topic/midi' into for-linus
* topic/midi:
  sound: rawmidi: disable active-sensing-on-close by default
  sound: seq_oss_midi: remove magic numbers
  sound: seq_midi: do not send MIDI reset when closing
  seq-midi: always log message on output overrun
2009-09-10 15:32:56 +02:00
Takashi Iwai 6a0f402146 Merge branch 'topic/dummy' into for-linus
* topic/dummy:
  ALSA: dummy - Increase MAX_PCM_SUBSTREAMS to 128
  ALSA: dummy - Add debug proc file
  ALSA: Add const prefix to proc helper functions
  ALSA: Re-export snd_pcm_format_name() function
  ALSA: dummy - Fake buffer allocations
  ALSA: dummy - Fix the timer calculation in systimer mode
  ALSA: dummy - Add more description
  ALSA: dummy - Better jiffies handling
  ALSA: dummy - Support high-res timer mode
2009-09-10 15:32:51 +02:00
Takashi Iwai f9892a52e2 Merge branch 'topic/dma-sgbuf' into for-linus
* topic/dma-sgbuf:
  ALSA: Fix SG-buffer DMA with non-coherent architectures
2009-09-10 15:32:50 +02:00
Takashi Iwai f604529d0c Merge branch 'topic/ctl-add-remove-fixes' into for-linus
* topic/ctl-add-remove-fixes:
  sound: snd_ctl_remove_user_ctl: prevent removal of kernel controls
  sound: snd_ctl_remove_unlocked_id: simplify user control counting
  sound: snd_ctl_remove_unlocked_id: simplify error paths
  sound: snd_ctl_elem_add: fix value count check
2009-09-10 15:32:47 +02:00
Takashi Iwai d0064a1b22 Merge branch 'topic/cleanup' into for-linus
* topic/cleanup:
  ALSA: info - Use krealloc()
2009-09-10 15:32:43 +02:00
Takashi Iwai 4f7454a997 ALSA: Add const prefix to proc helper functions
Add appropriate const prefix to char * arguments in proc helper functions.
Also fixed the caller side to be proper const pointers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-08 14:45:06 +02:00
Takashi Iwai 6e5265ec34 ALSA: Re-export snd_pcm_format_name() function
Re-export snd_pcm_format_name() function to be used outside the PCM core.
As a first example, usbaudio is changed to use it now again.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-08 14:26:51 +02:00
Takashi Iwai 82a783f4bc ALSA: Remove struct snd_monitor_file from public sound/core.h
The struct snd_monitor_file is used locally only in sound/core/init.c,
thus it should be moved there from the public sound/core.h.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-07 15:50:18 +02:00
Roel Kluin cbbb05703d ALSA: allocation may fail in snd_pcm_oss_change_params()
Allocation may fail, show if it did.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
[Additional fix for invalid runtime->oss.prepare flag set by tiwai]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-31 16:33:23 +02:00
Takashi Iwai 36ce99c1dc ALSA: Add debug module option
Add debug module option to snd core.
This controls the debug print level.  When CONFIG_SND_DEBUG_VERBOSE
is set, you can suppress the debug messages by giving or changing this
parameter to a lower value.  debug=0 means no debug messsages.
As default, it's set to the verbose level 2.

Since this option can be changed dynamically via sysfs file, you can
suppress the verbose debug messages on the fly, which wasn't possible
before.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-27 17:42:08 +02:00
Takashi Iwai 1b0053a0f0 ALSA: core - strip too long file names in snd_print*()
When modules are built with M= option, they pass long file paths to
__FILE__.  This results in ugly outputs of snd_print*() when
CONFIG_SND_VERBOSE_PRINTK is set.

This patch adds a check of the path and strips the leading path dirs
if the file name is an absolute path to improve the readability of logs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-27 12:39:35 +02:00