Commit bdc807871d broke the build
for this config because the sim_defconfig selects CONFIG_HZ=250
but include/asm-ia64/param.h has an ifdef for the simulator to
force HZ to 32. So we ended up with a kernel/timeconst.h set
for HZ=250 ... which then failed the check for the right HZ
value and died with:
Drop the #ifdef magic from param.h and make force CONFIG_HZ=32
directly for the simulator.
Signed-off-by: Tony Luck <tony.luck@intel.com>
pageattr-test.c contains a noisy debug printk that people reported.
The condition under which it prints (randomly tapping into a mem_map[]
hole and not being able to c_p_a() there) is valid behavior and not
interesting to report.
Remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since we may not have a pci_dev for the device we need to access, we can't
use pci_read_config_word. But raw_pci_read is an internal implementation
detail; it's better to use the architected pci_bus_read_config_word
interface. Using PCI_DEVFN instead of a mysterious constant helps
reassure everyone that we really do intend to access device 8.
[ Thanks to Grant Grundler for pointing out to me that this is exactly
what the write immediately above this is doing -- enabling device 8 to
respond to config space cycles.
- Matthew
Grant also says:
"Can you also add a comment which points at the Intel
documentation?
The 'Intel E7320 Memory Controller Hub (MCH) Datasheet' at
http://download.intel.com/design/chipsets/datashts/30300702.pdf
Page 69 documents register F4h (DEVPRES1).
And I just doubled checked that the 0xf4 register value is
restored later in the quirk (obvious when you look at the code
but not from the patch"
so here it is.
- Linus ]
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits)
[ARM] constify function pointer tables
[ARM] 4823/1: AT91 section fix
[ARM] 4824/1: pxa: clear RDH bit after any reset
[ARM] pxa: remove debugging PM: printk
ARM: OMAP1: Misc clean-up
ARM: OMAP1: Update defconfigs for omap1
ARM: OMAP1: Palm Tungsten E board clean-up
ARM: OMAP1: Use I2C bus registration helper for omap1
ARM: OMAP1: Remove omap_sram_idle()
ARM: OMAP1: PM fixes for OMAP1
ARM: OMAP1: Use MMC multislot structures for Siemens SX1 board
ARM: OMAP1: Make omap1 use MMC multislot structures
ARM: OMAP1: Change the comments to C style
ARM: OMAP1: Make omap1 boards to use omap_nand_platform_data
ARM: OMAP: Add helper module for board specific I2C bus registration
ARM: OMAP: Add dmtimer support for OMAP3
ARM: OMAP: Pre-3430 clean-up for dmtimer.c
ARM: OMAP: Add DMA support for chaining and 3430
ARM: OMAP: Add 24xx GPIO debounce support
ARM: OMAP: Get rid of unnecessary ifdefs in GPIO code
...
We want to allow different implementations of pci_raw_ops for standard
and extended config space on x86. Rather than clutter generic code with
knowledge of this, we make pci_raw_ops private to x86 and use it to
implement the new raw interface -- raw_pci_read() and raw_pci_write().
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thanks to Loic Prylli <loic@myri.com>, who originally proposed
this idea.
Always using legacy configuration mechanism for the legacy config space
and extended mechanism (mmconf) for the extended config space is
a simple and very logical approach. It's supposed to resolve all
known mmconf problems. It still allows per-device quirks (tweaking
dev->cfg_size). It also allows to get rid of mmconf fallback code.
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* master:
[ARM] constify function pointer tables
[ARM] 4823/1: AT91 section fix
[ARM] 4824/1: pxa: clear RDH bit after any reset
[ARM] pxa: remove debugging PM: printk
* omap1-upstream:
ARM: OMAP1: Misc clean-up
ARM: OMAP1: Update defconfigs for omap1
ARM: OMAP1: Palm Tungsten E board clean-up
ARM: OMAP1: Use I2C bus registration helper for omap1
ARM: OMAP1: Remove omap_sram_idle()
ARM: OMAP1: PM fixes for OMAP1
ARM: OMAP1: Use MMC multislot structures for Siemens SX1 board
ARM: OMAP1: Make omap1 use MMC multislot structures
ARM: OMAP1: Change the comments to C style
ARM: OMAP1: Make omap1 boards to use omap_nand_platform_data
ARM: OMAP: Add helper module for board specific I2C bus registration
ARM: OMAP: Add dmtimer support for OMAP3
ARM: OMAP: Pre-3430 clean-up for dmtimer.c
ARM: OMAP: Add DMA support for chaining and 3430
ARM: OMAP: Add 24xx GPIO debounce support
ARM: OMAP: Get rid of unnecessary ifdefs in GPIO code
ARM: OMAP: Add 3430 gpio support
ARM: OMAP: Add 3430 CPU identification macros
ARM: OMAP: Request DSP memory for McBSP
* orion:
[ARM] Orion: Use the sata_mv driver for the TS-209 SATA
[ARM] Orion: Use the sata_mv driver for the Kurobox SATA
[ARM] Orion: free up kernel virtual address space
[ARM] Orion: distinguish between physical and virtual addresses
[ARM] Orion: kill orion_early_putstr()
[ARM] Orion: update defconfig
[ARM] Orion: Use the sata_mv driver for the integrated SATA controller
Fix section warning:
WARNING: arch/arm/mach-at91/built-in.o(.text+0xd74): Section mismatch in reference
from the function init_programmable_clock()
to the function .init.text:at91_css_to_clk()
The function init_programmable_clock() references
the function __init at91_css_to_clk().
This is often because init_programmable_clock lacks a __init
annotation or the annotation of at91_css_to_clk is wrong.
In this case the only calls to and from init_programmable_clock()
are from code marked as "__init", so this fix is trivially correct.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Uwe Kleine-Knig <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
According to PXA300/310 and PXA320 Developer manuals,
the ASCR[RDH] "bit needs to be cleared as part of the software
initialization coming out of any reset and coming out of D3".
The latter requirement is addressed by commit
"c4d1fb627ff3072", as for the former (coming out of any reset),
the kernel relies on boot loaders and assumes that RDH bit
is cleared there. Though, not all bootloaders follow the rule
so we have to clear the bit in kernel.
We clear the RDH bit in pxa3xx_init() function since
it is always invoked after any reset. We also preserve D1S, D2S
and D3S bits from being cleared in case we invoke pxa3xx_init()
function not from normal hardware reset (e.g. kexec scenario),
so these bits can be properly referenced later.
Signed-off-by: Dmitry Krivoschekov <dmitry.krivoschekov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Right now, we check only the first 4k page for static required protections.
This does not take overlapping regions into account. So we might end up
setting the wrong permissions/protections for other parts of this large page.
This can be optimized further, but correctness is the important part.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now, that the page pool is in place we can enable DEBUG_PAGEALLOC on
64bit.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Switch the split page code to use the page pool. We do this
unconditionally to avoid different behaviour with and without
DEBUG_PAGEALLOC enabled.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
DEBUG_PAGEALLOC was not possible on 64-bit due to its early-bootup
hardcoded reliance on PSE pages, and the unrobustness of the runtime
splitup of large pages. The splitup ended in recursive calls to
alloc_pages() when a page for a pte split was requested.
Avoid the recursion with a preallocated page pool, which is used to
split up large mappings and gets refilled in the return path of
kernel_map_pages after the split has been done. The size of the page
pool is adjusted to the available memory.
This part just implements the page pool and the initialization w/o
using it yet.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In some suspend and hibernation files in arch/x86/power there are
comments referring to arch/x86-64 and arch/i386 . Update them to
reflect the current code layout.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Move the hibernation-specific code from arch/x86/power/suspend_64.c
to a separate file (hibernate_64.c) and the CPU-handling code to
cpu_64.c (in line with the corresponding 32-bit code).
Simplify arch/x86/power/Makefile .
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Rename cpu.c, suspend.c and swsusp.S in arch/x86/power to cpu_32.c,
hibernate_32.c and hibernate_asm_32.S, respectively, and update the
purpose and copyright information in these files.
Update the Makefile in arch/x86/power to reflect the above changes.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Move arch/x86/kernel/suspend_64.c to arch/x86/power .
Move arch/x86/kernel/suspend_asm_64.S to arch/x86/power
as hibernate_asm_64.S .
Update purpose and copyright information in
arch/x86/power/suspend_64.c and
arch/x86/power/hibernate_asm_64.S .
Update the Makefiles in arch/x86, arch/x86/kernel and
arch/x86/power to reflect the above changes.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In arch/x86/boot/printf.c gets rid of unused tail of digits: const char
*digits = "0123456789abcdefghijklmnopqrstuvwxyz"; (we are using 0-9a-f
only)
Uses smaller/faster lowercasing (by ORing with 0x20)
if we know that we work on numbers/digits. Makes
strtoul smaller, and also we are getting rid of
static const char small_digits[] = "0123456789abcdefx";
static const char large_digits[] = "0123456789ABCDEFX";
since this works equally well:
static const char digits[16] = "0123456789ABCDEF";
Size savings:
$ size vmlinux.org vmlinux
text data bss dec hex filename
877320 112252 90112 1079684 107984 vmlinux.org
877048 112252 90112 1079412 107874 vmlinux
It may be also a tiny bit faster because code has less
branches now, but I doubt it is measurable.
[ hugh@veritas.com: uppercase pointers fix ]
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Some important parts of f6df72e71e got
dropped along the way, reintroduce them.
Only affects paravirt guests.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Specifically the boot time page tables in a CONFIG_X86_PAE=y enabled
kernel are in PAE format.
early_ioremap is updated to use the standard page table accessors.
Clear any mappings beyond max_low_pfn from the boot page tables in
native_pagetable_setup_start because the initial mappings can extend
beyond the range of physical memory and into the vmalloc area.
Derived from patches by Eric Biederman and H. Peter Anvin.
[ jeremy@goop.org: PAE swapper_pg_dir needs to be page-sized fix ]
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Mika Penttilä <mika.penttila@kolumbus.fi>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Other than the defconfigs, remove the entry in compiler-gcc4.h,
Kconfig.debug and feature-removal-schedule.txt.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use a common irq_return entry point for all the iret places, which
need the paravirt INTERRUPT return wrapper.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Adjust the definition of lookup_address to take an unsigned long
level argument. Adjust callers in xen/mmu.c that pass in a
dummy variable.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use xen_khz to denote xen_specific clock speed. Avoid shadowing
cpu_khz.
arch/x86/xen/time.c:220:6: warning: symbol 'cpu_khz' shadows an earlier one
include/asm/tsc.h:17:21: originally declared here
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Each AMD Geode MFGPT timer interrupt output is paired with another
timer; esentially the interrupt goes if either timer fires. This
is okay, but the handlers need to be aware of this. Make sure in
the timer tick handler that our timer really did expire.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We *really* don't want to be reading MFGPTx_SETUP and writing back those
values. What we want to be doing is clearing CMP1 and CMP2 unconditionally;
otherwise, we have races where CMP1 and/or CMP2 fire after we've read
MFGPTx_SETUP. They can also fire between when we've written ~CNTEN to
the register, and when the new register values get copied to the timer's
version of the register. By clearing both fields, we're okay.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
There isn't much value to always detecting the MFGPT timers on
Geode platforms; detection is only needed when something wants
to use the timers. Move the detection code so that it gets
called the first time a timer is allocated.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We need to be called from elsewhere, and this gets some #ifdefs out
of the .c file.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Drop F_AVAIL and the 'flags' field, replacing with an 'avail' bit. This
looks more understandable to me.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We had planned to use the 'owner' field for allowing re-allocation of
MFGPTs; however, doing it by module owner name isn't flexible enough. So,
drop this for now. If it turns out that we need timers in modules, we'll
need to come up with a scheme that matches the write-once fields of the
MFGPTx_SETUP register, and drops ponies from the sky.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The GEODE MFGPT code assumed that 32kHz was 32000 Hz while the boards
run on a 32.768 kHz digital watch crystal. In practise, it will not
change the timer's frequency as the skew was only 2.4%, but it
should provide more accurate intervals.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
- uninline timer functions; the compiler knows better than we do
whether or not to inline these.
- mfgpt_start_timer() had an unused 'clock' argument, drop it.
From both Jordan and myself.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
Kbuild: Fix deb-pkg target to work with kernel versions ending with -<text-without-digit>
ide: introduce HAVE_IDE
kbuild: silence CHK/UPD messages according to $(quiet)
scsi: fix makefile for aic7(3*x)
kbuild/modpost: Use warn() for announcing section mismatches
Add binoffset to gitignore
kbuild/modpost: improve warnings if symbol is unknown
Add support for different number of page table levels dependent
on the highest address used for a process. This will cause a 31 bit
process to use a two level page table instead of the four level page
table that is the default after the pud has been introduced. Likewise
a normal 64 bit process will use three levels instead of four. Only
if a process runs out of the 4 tera bytes which can be addressed with
a three level page table the fourth level is dynamically added. Then
the process can use up to 8 peta byte.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Linus Torvalds
Tony Luck
Thomas Gleixner
Matthew Wilcox
Ivan Kokshaysky
S.Çağlar Onur
Russell King
Jan Engelhardt
David Brownell
Dmitry Krivoschekov
Rafael J. Wysocki
Denys Vlasenko
Ian Campbell
Harvey Harrison
Ingo Molnar
Arnd Hannemann
Jordan Crouse
Andres Salomon
Willy Tarreau
Martin Schwidefsky
Heiko Carstens