Commit Graph

129 Commits

Author SHA1 Message Date
Eric Work a81157768a md/raid0: fix restore to sector variable in raid0_make_request
The variable "sector" in "raid0_make_request()" was improperly updated
by a call to "sector_div()" which modifies its first argument in place.
Commit 47d68979cc restored this variable
after the call for later re-use.  Unfortunetly the restore was done after
the referenced variable "bio" was advanced.  This lead to the original
value and the restored value being different.  Here we move this line to
the proper place.

One observed side effect of this bug was discarding a file though
unlinking would cause an unrelated file's contents to be discarded.

Signed-off-by: NeilBrown <neilb@suse.de>
Fixes: 47d68979cc ("md/raid0: fix bug with chunksize not a power of 2.")
Cc: stable@vger.kernel.org (any that received above backport)
URL: https://bugzilla.kernel.org/show_bug.cgi?id=98501
2015-05-21 09:14:25 +10:00
Heinz Mauelshagen b6538fe329 md-raid0: conditional mddev->queue access to suit dm-raid
This patch is a prerequisite for dm-raid "raid0" support to allow
dm-raid to access the MD RAID0 personality doing unconditional
accesses to mddev->queue, which is NULL in case of dm-raid stacked on
top of MD.

Most of the conditional mddev->queue accesses made it to upstream but
this missing one, which prohibits md raid0 to set disk stack limits
(being done in dm core in case of md underneath dm).

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Tested-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2015-05-08 18:39:40 +10:00
Heinz Mauelshagen 753f2856cd md raid0: access mddev->queue (request queue member) conditionally because it is not set when accessed from dm-raid
The patch makes 3 references to mddev->queue in the raid0 personality
conditional in order to allow for it to be accessed from dm-raid.
Mandatory, because md instances underneath dm-raid don't manage
a request queue of their own which'd lead to oopses without the patch.

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Tested-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2015-04-22 08:00:41 +10:00
NeilBrown 47d68979cc md/raid0: fix bug with chunksize not a power of 2.
Since commit 20d0189b10
in v3.14-rc1 RAID0 has performed incorrect calculations
when the chunksize is not a power of 2.

This happens because "sector_div()" modifies its first argument, but
this wasn't taken into account in the patch.

So restore that first arg before re-using the variable.

Reported-by: Joe Landman <joe.landman@gmail.com>
Reported-by: Dave Chinner <david@fromorbit.com>
Fixes: 20d0189b10
Cc: stable@vger.kernel.org (3.14 and later).
Signed-off-by: NeilBrown <neilb@suse.de>
2015-04-10 15:36:31 +10:00
NeilBrown 0c35bd4723 md: fix problems with freeing private data after ->run failure.
If ->run() fails, it can either free the data structures it
allocated, or leave that task to ->free() which will be called
on failures.

However:
  md.c calls ->free() even if ->private_data is NULL, which
     causes problems in some personalities.
  raid0.c frees the data, but doesn't clear ->private_data,
     which will become a problem when we fix md.c

So better fix both these issues at once.

Reported-by: Richard W.M. Jones <rjones@redhat.com>
Fixes: 5aa61f427e
URL: https://bugzilla.kernel.org/show_bug.cgi?id=94381
Signed-off-by: NeilBrown <neilb@suse.de>
2015-03-21 09:40:36 +11:00
NeilBrown afa0f557cb md: rename ->stop to ->free
Now that the ->stop function only frees the private data,
rename is accordingly.

Also pass in the private pointer as an arg rather than using
mddev->private.  This flexibility will be useful in level_store().

Finally, don't clear ->private.  It doesn't make sense to clear
it seeing that isn't what we free, and it is no longer necessary
to clear ->private (it was some time ago before  ->to_remove was
introduced).

Setting ->to_remove in ->free() is a bit of a wart, but not a
big problem at the moment.

Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-04 08:35:52 +11:00
NeilBrown 5aa61f427e md: split detach operation out from ->stop.
Each md personality has a 'stop' operation which does two
things:
 1/ it finalizes some aspects of the array to ensure nothing
    is accessing the ->private data
 2/ it frees the ->private data.

All the steps in '1' can apply to all arrays and so can be
performed in common code.

This is useful as in the case where we change the personality which
manages an array (in level_store()), it would be helpful to do
step 1 early, and step 2 later.

So split the 'step 1' functionality out into a new mddev_detach().

Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-04 08:35:52 +11:00
NeilBrown 64590f45dd md: make merge_bvec_fn more robust in face of personality changes.
There is no locking around calls to merge_bvec_fn(), so
it is possible that calls which coincide with a level (or personality)
change could go wrong.

So create a central dispatch point for these functions and use
rcu_read_lock().
If the array is suspended, reject any merge that can be rejected.
If not, we know it is safe to call the function.

Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-04 08:35:52 +11:00
NeilBrown 5c675f83c6 md: make ->congested robust against personality changes.
There is currently no locking around calls to the 'congested'
bdi function.  If called at an awkward time while an array is
being converted from one level (or personality) to another, there
is a tiny chance of running code in an unreferenced module etc.

So add a 'congested' function to the md_personality operations
structure, and call it with appropriate locking from a central
'mddev_congested'.

When the array personality is changing the array will be 'suspended'
so no IO is processed.
If mddev_congested detects this, it simply reports that the
array is congested, which is a safe guess.
As mddev_suspend calls synchronize_rcu(), mddev_congested can
avoid races by included the whole call inside an rcu_read_lock()
region.
This require that the congested functions for all subordinate devices
can be run under rcu_lock.  Fortunately this is the case.

Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-04 08:35:52 +11:00
NeilBrown f72ffdd686 md: remove unwanted white space from md.c
My editor shows much of this is RED.

Signed-off-by: NeilBrown <neilb@suse.de>
2014-10-14 13:08:29 +11:00
NeilBrown a8461a61c2 md/raid0: check for bitmap compatability when changing raid levels.
If an array has a bitmap, then it cannot be converted to raid0.

Reported-by: Xiao Ni <xni@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2014-08-08 15:33:17 +10:00
Kent Overstreet 20d0189b10 block: Introduce new bio_split()
The new bio_split() can split arbitrary bios - it's not restricted to
single page bios, like the old bio_split() (previously renamed to
bio_pair_split()). It also has different semantics - it doesn't allocate
a struct bio_pair, leaving it up to the caller to handle completions.

Then convert the existing bio_pair_split() users to the new bio_split()
- and also nvme, which was open coding bio splitting.

(We have to take that BUG_ON() out of bio_integrity_trim() because this
bio_split() needs to use it, and there's no reason it has to be used on
bios marked as cloned; BIO_CLONED doesn't seem to have clearly
documented semantics anyways.)

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Neil Brown <neilb@suse.de>
2013-11-23 22:33:57 -08:00
Kent Overstreet ee67891bf1 block: Rename bio_split() -> bio_pair_split()
This is prep work for introducing a more general bio_split().

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: NeilBrown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Peter Osterlund <petero2@telia.com>
Cc: Sage Weil <sage@inktank.com>
2013-11-23 22:33:56 -08:00
Kent Overstreet 458b76ed2f block: Kill bio_segments()/bi_vcnt usage
When we start sharing biovecs, keeping bi_vcnt accurate for splits is
going to be error prone - and unnecessary, if we refactor some code.

So bio_segments() has to go - but most of the existing users just needed
to know if the bio had multiple segments, which is easier - add a
bio_multiple_segments() for them.

(Two of the current uses of bio_segments() are going to go away in a
couple patches, but the current implementation of bio_segments() is
unsafe as soon as we start doing driver conversions for immutable
biovecs - so implement a dumb version for bisectability, it'll go away
in a couple patches)

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Neil Brown <neilb@suse.de>
Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com>
Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
2013-11-23 22:33:51 -08:00
Kent Overstreet 4f024f3797 block: Abstract out bvec iterator
Immutable biovecs are going to require an explicit iterator. To
implement immutable bvecs, a later patch is going to add a bi_bvec_done
member to this struct; for now, this patch effectively just renames
things.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Cc: Sage Weil <sage@inktank.com>
Cc: Alex Elder <elder@inktank.com>
Cc: ceph-devel@vger.kernel.org
Cc: Joshua Morris <josh.h.morris@us.ibm.com>
Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: Benny Halevy <bhalevy@tonian.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Ben Myers <bpm@sgi.com>
Cc: xfs@oss.sgi.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: "Roger Pau Monné" <roger.pau@citrix.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchand@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Peng Tao <tao.peng@emc.com>
Cc: Andy Adamson <andros@netapp.com>
Cc: fanchaoting <fanchaoting@cn.fujitsu.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Pankaj Kumar <pankaj.km@samsung.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Mel Gorman <mgorman@suse.de>6
2013-11-23 22:33:47 -08:00
NeilBrown eea136d69f md: fix buglet in RAID5 -> RAID0 conversion.
RAID5 uses a 'per-array' value for the 'size' of each device.
RAID0 uses a 'per-device' value - it can be different for each device.

When converting a RAID5 to a RAID0 we must ensure that the per-device
size of each device matches the per-array size for the RAID5, else
the array will change size.

If the metadata cannot record a changed per-device size (as is the
case with v0.90 metadata) the array could get bigger on restart.  This
does not cause data corruption, so it not a big issue and is mainly
yet another a reason to not use 0.90.

Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-26 12:38:19 +10:00
Kent Overstreet 5b83636ae3 block: Change bio_split() to respect the current value of bi_idx
In the current code bio_split() won't be seeing partially completed bios
so this doesn't change any behaviour, but this makes the code a bit
clearer as to what bio_split() actually requires.

The immediate purpose of the patch is removing unnecessary bi_idx
references, but the end goal is to allow partial completed bios to be
submitted, which along with immutable biovecs enables effecient bio
splitting.

Some of the callers were (double) checking that bios could be split, so
update their checks too.

Signed-off-by: Kent Overstreet <koverstreet@google.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: Lars Ellenberg <drbd-dev@lists.linbit.com>
CC: Neil Brown <neilb@suse.de>
CC: Martin K. Petersen <martin.petersen@oracle.com>
2013-03-23 14:15:30 -07:00
Kent Overstreet aa8b57aa3d block: Use bio_sectors() more consistently
Bunch of places in the code weren't using it where they could be -
this'll reduce the size of the patch that puts bi_sector/bi_size/bi_idx
into a struct bvec_iter.

Signed-off-by: Kent Overstreet <koverstreet@google.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: "Ed L. Cashin" <ecashin@coraid.com>
CC: Nick Piggin <npiggin@kernel.dk>
CC: Jiri Kosina <jkosina@suse.cz>
CC: Jim Paris <jim@jtan.com>
CC: Geoff Levand <geoff@infradead.org>
CC: Alasdair Kergon <agk@redhat.com>
CC: dm-devel@redhat.com
CC: Neil Brown <neilb@suse.de>
CC: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Ed Cashin <ecashin@coraid.com>
2013-03-23 14:15:30 -07:00
NeilBrown f96c9f305c md/raid0: improve error message when converting RAID4-with-spares to RAID0
Mentioning "bad disk number -1" exposes irrelevant internal detail.
Just say they are inactive and must be removed.

Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-26 11:58:44 +11:00
NeilBrown 58ebb34c49 md: raid0: fix error return from create_stripe_zones.
Create_stripe_zones returns an error slightly differently to
raid0_run and to raid0_takeover_*.

The error returned used by the second was wrong and an error would
result in mddev->private being set to NULL and sooner or later a
crash.

So never return NULL, return ERR_PTR(err), not NULL from
create_stripe_zones.

This bug has been present since 2.6.35 so the fix is suitable
for any kernel since then.

Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-26 11:57:04 +11:00
NeilBrown a646853991 md: fix two bugs when attempting to resize RAID0 array.
You cannot resize a RAID0 array (in terms of making the devices
bigger), but the code doesn't entirely stop you.
So:

 disable setting of the available size on each device for
 RAID0 and Linear devices.  This must not change as doing so
 can change the effective layout of data.

 Make sure that the size that raid0_size() reports is accurate,
 but rounding devices sizes to chunk sizes.  As the device sizes
 cannot change now, this isn't so important, but it is best to be
 safe.

Without this change:
  mdadm --grow /dev/md0 -z max
  mdadm --grow /dev/md0 -Z max
  then read to the end of the array

can cause a BUG in a RAID0 array.

These bugs have been present ever since it became possible
to resize any device, which is a long time.  So the fix is
suitable for any -stable kerenl.

Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-26 11:55:40 +11:00
Shaohua Li c83057a1f4 md: raid 0 supports TRIM
This makes md raid 0 support TRIM.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11 13:25:44 +11:00
Martin K. Petersen 4363ac7c13 block: Implement support for WRITE SAME
The WRITE SAME command supported on some SCSI devices allows the same
block to be efficiently replicated throughout a block range. Only a
single logical block is transferred from the host and the storage device
writes the same data to all blocks described by the I/O.

This patch implements support for WRITE SAME in the block layer. The
blkdev_issue_write_same() function can be used by filesystems and block
drivers to replicate a buffer across a block range. This can be used to
efficiently initialize software RAID devices, etc.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-20 14:31:45 +02:00
Jes Sorensen 24b961f811 md: Avoid OOPS when reshaping raid1 to raid0
raid1 arrays do not have the notion of chunk size. Calculate the
largest chunk sector size we can use to avoid a divide by zero OOPS
when aligning the size of the new array to the chunk size.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-04-03 15:37:26 +10:00
majianpeng 0366ef8475 md/raid0: If md_integrity_register() fails, raid0_run() must free the mem.
Signed-off-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-04-02 09:48:37 +10:00
NeilBrown ba13da47ff md: add proper merge_bvec handling to RAID0 and Linear.
These personalities currently set a max request size of one page
when any member device has a merge_bvec_fn because they don't
bother to call that function.

This causes extra works in splitting and combining requests.

So make the extra effort to call the merge_bvec_fn when it exists
so that we end up with larger requests out the bottom.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 12:46:39 +11:00
NeilBrown dafb20fa34 md: tidy up rdev_for_each usage.
md.h has an 'rdev_for_each()' macro for iterating the rdevs in an
mddev.  However it uses the 'safe' version of list_for_each_entry,
and so requires the extra variable, but doesn't include 'safe' in the
name, which is useful documentation.

Consequently some places use this safe version without needing it, and
many use an explicity list_for_each entry.

So:
 - rename rdev_for_each to rdev_for_each_safe
 - create a new rdev_for_each which uses the plain
   list_for_each_entry,
 - use the 'safe' version only where needed, and convert all other
   list_for_each_entry calls to use rdev_for_each.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 12:46:39 +11:00
Linus Torvalds 32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
Linus Torvalds b4fdcb02f1 Merge branch 'for-3.2/core' of git://git.kernel.dk/linux-block
* 'for-3.2/core' of git://git.kernel.dk/linux-block: (29 commits)
  block: don't call blk_drain_queue() if elevator is not up
  blk-throttle: use queue_is_locked() instead of lockdep_is_held()
  blk-throttle: Take blkcg->lock while traversing blkcg->policy_list
  blk-throttle: Free up policy node associated with deleted rule
  block: warn if tag is greater than real_max_depth.
  block: make gendisk hold a reference to its queue
  blk-flush: move the queue kick into
  blk-flush: fix invalid BUG_ON in blk_insert_flush
  block: Remove the control of complete cpu from bio.
  block: fix a typo in the blk-cgroup.h file
  block: initialize the bounce pool if high memory may be added later
  block: fix request_queue lifetime handling by making blk_queue_cleanup() properly shutdown
  block: drop @tsk from attempt_plug_merge() and explain sync rules
  block: make get_request[_wait]() fail if queue is dead
  block: reorganize throtl_get_tg() and blk_throtl_bio()
  block: reorganize queue draining
  block: drop unnecessary blk_get/put_queue() in scsi_cmd_ioctl() and blk_get_tg()
  block: pass around REQ_* flags instead of broken down booleans during request alloc/free
  block: move blk_throtl prototypes to block/blk.h
  block: fix genhd refcounting in blkio_policy_parse_and_set()
  ...

Fix up trivial conflicts due to "mddev_t" -> "struct mddev" conversion
and making the request functions be of type "void" instead of "int" in
 - drivers/md/{faulty.c,linear.c,md.c,md.h,multipath.c,raid0.c,raid1.c,raid10.c,raid5.c}
 - drivers/staging/zram/zram_drv.c
2011-11-04 17:06:58 -07:00
Paul Gortmaker 056075c764 md: Add module.h to all files using it implicitly
A pending cleanup will mean that module.h won't be implicitly
everywhere anymore.  Make sure the modular drivers in md dir
are actually calling out for <module.h> explicitly in advance.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:18 -04:00
NeilBrown 84fc4b56db md: rename "mdk_personality" to "md_personality"
"mdk" doesn't mean anything any more.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:58 +11:00
NeilBrown e373ab1091 md/raid0: typedef removal: raid0_conf_t -> struct r0conf
Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:59 +11:00
NeilBrown fd01b88c75 md: remove typedefs: mddev_t -> struct mddev
Having mddev_t and 'struct mddev_s' is ugly and not preferred

Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:47:53 +11:00
NeilBrown 3cb0300200 md: removing typedefs: mdk_rdev_t -> struct md_rdev
The typedefs are just annoying. 'mdk' probably refers to 'md_k.h'
which used to be an include file that defined this thing.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:45:26 +11:00
NeilBrown 50de8df4ab md/raid0: convert some printks to pr_debug.
When md assembles a RAID0 array it prints out lots of info which
is really just for debugging, so convert that to pr_debug.
It also prints out the resulting configuration which could be
interesting, so keep that as 'printk' but tidy it up a bit.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07 14:23:22 +11:00
NeilBrown bdc04e6b15 md: remove some old DEBUGging code.
This code is not really helpful and is hard to maintain, so just
discard it.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07 14:23:04 +11:00
Christoph Hellwig 5a7bbad27a block: remove support for bio remapping from ->make_request
There is very little benefit in allowing to let a ->make_request
instance update the bios device and sector and loop around it in
__generic_make_request when we can archive the same through calling
generic_make_request from the driver and letting the loop in
generic_make_request handle it.

Note that various drivers got the return value from ->make_request and
returned non-zero values for errors.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-09-12 12:12:01 +02:00
Martin K. Petersen a91a2785b2 block: Require subsystems to explicitly allocate bio_set integrity mempool
MD and DM create a new bio_set for every metadevice. Each bio_set has an
integrity mempool attached regardless of whether the metadevice is
capable of passing integrity metadata. This is a waste of memory.

Instead we defer the allocation decision to MD and DM since we know at
metadevice creation time whether integrity passthrough is needed or not.

Automatic integrity mempool allocation can then be removed from
bioset_create() and we make an explicit integrity allocation for the
fs_bio_set.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Acked-by: Mike Snitzer <snizer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-17 11:11:05 +01:00
Jens Axboe 4c63f5646e Merge branch 'for-2.6.39/stack-plug' into for-2.6.39/core
Conflicts:
	block/blk-core.c
	block/blk-flush.c
	drivers/md/raid1.c
	drivers/md/raid10.c
	drivers/md/raid5.c
	fs/nilfs2/btnode.c
	fs/nilfs2/mdt.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:58:35 +01:00
Jens Axboe 7eaceaccab block: remove per-queue plugging
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
NeilBrown da9cf5050a md: avoid spinlock problem in blk_throtl_exit
blk_throtl_exit assumes that ->queue_lock still exists,
so make sure that it does.
To do this, we stop redirecting ->queue_lock to conf->device_lock
and leave it pointing where it is initialised - __queue_lock.

As the blk_plug functions check the ->queue_lock is held, we now
take that spin_lock explicitly around the plug functions.  We don't
need the locking, just the warning removal.

This is needed for any kernel with the blk_throtl code, which is
which is 2.6.37 and later.

Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
2011-02-21 18:25:57 +11:00
Krzysztof Wojcik f7bee80945 md: Fix raid1->raid0 takeover
Takeover raid1->raid0 not succeded. Kernel message is shown:
"md/raid0:md126: too few disks (1 of 2) - aborting!"

Problem was that we weren't updating ->raid_disks for that
takeover, unlike all the others.

Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-02-14 10:01:41 +11:00
Krzysztof Wojcik fc3a08b85b Add raid1->raid0 takeover support
This patch introduces raid 1 to raid0 takeover operation
in kernel space.

Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com>
Signed-off-by: Neil Brown <neilb@nbeee.brown>
2011-01-31 13:47:13 +11:00
Tejun Heo e9c7469bb4 md: implment REQ_FLUSH/FUA support
This patch converts md to support REQ_FLUSH/FUA instead of now
deprecated REQ_HARDBARRIER.  In the core part (md.c), the following
changes are notable.

* Unlike REQ_HARDBARRIER, REQ_FLUSH/FUA don't interfere with
  processing of other requests and thus there is no reason to mark the
  queue congested while FLUSH/FUA is in progress.

* REQ_FLUSH/FUA failures are final and its users don't need retry
  logic.  Retry logic is removed.

* Preflush needs to be issued to all member devices but FUA writes can
  be handled the same way as other writes - their processing can be
  deferred to request_queue of member devices.  md_barrier_request()
  is renamed to md_flush_request() and simplified accordingly.

For linear, raid0 and multipath, the core changes are enough.  raid1,
5 and 10 need the following conversions.

* raid1: Handling of FLUSH/FUA bio's can simply be deferred to
  request_queues of member devices.  Barrier related logic removed.

* raid5: Queue draining logic dropped.  FUA bit is propagated through
  biodrain and stripe resconstruction such that all the updated parts
  of the stripe are written out with FUA writes if any of the dirtying
  writes was FUA.  preread_active_stripes handling in make_request()
  is updated as suggested by Neil Brown.

* raid10: FUA bit needs to be propagated to write clones.

linear, raid0, 1, 5 and 10 tested.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:38 +02:00
Christoph Hellwig 7b6d91daee block: unify flags for struct bio and struct request
Remove the current bio flags and reuse the request flags for the bio, too.
This allows to more easily trace the type of I/O from the filesystem
down to the block driver.  There were two flags in the bio that were
missing in the requests:  BIO_RW_UNPLUG and BIO_RW_AHEAD.  Also I've
renamed two request flags that had a superflous RW in them.

Note that the flags are in bio.h despite having the REQ_ name - as
blkdev.h includes bio.h that is the only way to go for now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:20:39 +02:00
Maciej Trela 049d6c1ef9 md: enable raid4->raid0 takeover
Only level 5 with layout=PARITY_N can be taken over to raid0 now.
Lets allow level 4 either.

Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-24 13:34:57 +10:00
Maciej Trela 001048a318 md: clear layout after ->raid0 takeover
After takeover from raid5/10 -> raid0 mddev->layout is not cleared.

Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-24 13:34:45 +10:00
NeilBrown e93f68a1fc md: fix handling of array level takeover that re-arranges devices.
Most array level changes leave the list of devices largely unchanged,
possibly causing one at the end to become redundant.
However conversions between RAID0 and RAID10 need to renumber
all devices (except 0).

This renumbering is currently being done in the ->run method when the
new personality takes over.  However this is too late as the common
code in md.c might already have invalidated some of the devices if
they had a ->raid_disk number that appeared to high.

Moving it into the ->takeover method is too early as the array is
still active at that time and wrong ->raid_disk numbers could cause
confusion.

So add a ->new_raid_disk field to mdk_rdev_s and use it to communicate
the new raid_disk number.
Now the common code knows exactly which devices need to be renumbered,
and which can be invalidated, and can do it all at a convenient time
when the array is suspend.
It can also update some symlinks in sysfs which previously were not be
updated correctly.

Reported-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-24 13:33:24 +10:00
NeilBrown 19fdb9eefb Merge commit '3ff195b011d7decf501a4d55aeed312731094796' into for-linus
Conflicts:
	drivers/md/md.c

- Resolved conflict in md_update_sb
- Added extra 'NULL' arg to new instance of sysfs_get_dirent.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-22 08:31:36 +10:00
NeilBrown b5a20961f3 md/raid0: tidy up printk messages.
All messages now start
   md/raid0:md-device-name:

Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-18 15:27:59 +10:00