Commit Graph

1744 Commits

Author SHA1 Message Date
Roel Kluin 269c0ee663 slram: Read buffer overflow
map[count] is checked before count < SLRAM_MAX_DEVICES_PARAMS

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-04 09:40:09 +01:00
vimal singh ad4fbc7921 mtd: physmap_of: fix incorrect check
This patch fixes a spelling error that has resulted from copy and
pasting. The location of the error was found using a semantic patch
but the semantic patch was not trying to find these errors. After
looking things over it seemed logical that this change was needed.

The patch also makes sure mtd_list is not being freed if it has not
been allocated

Signed-off-by: Stoyan Gaydarov <sgayda2@uiuc.edu>
Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-04 09:39:50 +01:00
Singh, Vimal 9a73290d77 mtd: nand_base: allow drivers to choose ECC block size
This patch allows core driver to choose ECC block size in
sw ecc case.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-04 09:39:11 +01:00
Robert P. J. Day 05dd180709 mtd: correct typo "MTD_DATAFLASH_VERIFY_WRITE"
Fix the misspelling to match the actual config variable defined in
drivers/mtd/devi ces/Kconfig:

config MTD_DATAFLASH_WRITE_VERIFY
        bool "Verify DataFlash page writes"
        depends on MTD_DATAFLASH

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-04 09:38:55 +01:00
Russell King 0ffd24fc7f mtd: afs: fix build warning
drivers/mtd/afs.c:244: warning: format ‘%5d’ expects type ‘int’, but argument 4 has type ‘uint64_t’

[dwmw2: fix incorrect 'KB' too]
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-04 09:38:14 +01:00
Wolfram Sang 76d6a47916 mtd: plat-ram: use resource_size
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-04 09:37:34 +01:00
Wolfram Sang 2763c508a3 mtd: physmap_of: use resource_size
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-04 09:37:18 +01:00
H Hartley Sweeten 44a1f2085e mtd: ep93xx: cleanup includes in ts7250 nand driver
1. <linux/io.h> should be included not <asm/io.h>
2. add platform specific header <mach/ts72xx.h>

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-04 09:35:12 +01:00
Matthias Kaehlcke dff1550986 mtd: fix a typo in comment
mtdblock erase_write(): fix typo in comment

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-04 09:34:49 +01:00
vimal singh 20d8e2489d mtd: nand_base: use __func__ instead of typing names
Correcting debug prints by removing function names from print messages
and using '__func__' macro instead.

Function names were wrong in few places.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-04 09:34:38 +01:00
vimal singh b8b3ee9aab mtd: nand: remove repeated comment, fix spelling
Singed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-04 09:33:51 +01:00
Mika Korhonen 492e150143 mtd: OneNAND: spelling fixes
Signed-off-by: Mika Korhonen <mika.j.korhonen@gmail.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-04 09:30:17 +01:00
Dimitri Gorokhovik 16f05c2b68 mtd: nftl: fix offset alignments
Arithmetic conversion in the mask computation makes the upper word
of the second argument passed down to mtd->read_oob(), be always 0
(assuming 'offs' being a 64-bit signed long long type, and
'mtd->writesize' being a 32-bit unsigned int type).

This patch applies over the other one adding masking in nftl_write,
"nftl: write support is broken".

Signed-off-by: Dimitri Gorokhovik <dimitri.gorokhovik@free.fr>
Cc: Tim Gardner <tim.gardner@canonical.com>
Cc: Scott James Remnant <scott@canonical.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-03 14:59:16 +01:00
Dimitri Gorokhovik 4149ed1aa9 mtd: nftl: write support is broken
Write support is broken in NFTL. Fix it.

Signed-off-by: <dimitri.gorokhovik@free.fr>
Cc: Tim Gardner <tim.gardner@canonical.com>
Cc: Scott James Remnant <scott@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-03 14:59:13 +01:00
Anton Vorontsov edcb3b1486 mtd: m25p80: fix null pointer dereference bug
This patch fixes the following oops, observed with MTD_PARTITIONS=n:

m25p80 spi32766.0: m25p80 (1024 Kbytes)
Unable to handle kernel paging request for data at address 0x00000008
Faulting instruction address: 0xc03a54b0
Oops: Kernel access of bad area, sig: 11 [#1]
Modules linked in:
NIP: c03a54b0 LR: c03a5494 CTR: c01e98b8
REGS: ef82bb60 TRAP: 0300   Not tainted  (2.6.31-rc4-00167-g4733fd3)
MSR: 00029000 <EE,ME,CE>  CR: 24022022  XER: 20000000
DEAR: 00000008, ESR: 00000000
TASK = ef82c000[1] 'swapper' THREAD: ef82a000
GPR00: 00000000 ef82bc10 ef82c000 0000002e 00001eb8 ffffffff c01e9824 00000036
GPR08: c054ed40 c0542a08 00001eb8 00004000 22022022 1001a1a0 3ff8fd00 00000000
GPR16: 00000000 00000001 00000000 00000000 ef82bddc c0530000 efbef500 ef8356d0
GPR24: 00000000 ef8356d0 00000000 efbf7a00 c0530ec4 ffffffed efbf5300 c0541f98
NIP [c03a54b0] m25p_probe+0x22c/0x354
LR [c03a5494] m25p_probe+0x210/0x354
Call Trace:
[ef82bc10] [c03a5494] m25p_probe+0x210/0x354 (unreliable)
[ef82bca0] [c024e37c] spi_drv_probe+0x2c/0x3c
[ef82bcb0] [c01f1afc] driver_probe_device+0xa4/0x178
[ef82bcd0] [c01f06e8] bus_for_each_drv+0x6c/0xa8
[ef82bd00] [c01f1a34] device_attach+0x84/0xa8
...

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-03 13:58:02 +01:00
Tony Lindgren 6175556fdc OMAP: Rename OMAP_MPUIO_BASE to OMAP1_MPUIO_BASE
Rename OMAP_MPUIO_BASE to OMAP1_MPUIO_BASE

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28 10:50:34 -07:00
Simon Kagstrom 94da210af4 [ARM] Orion NAND: Make asm volatile avoid GCC pushing ldrd out of the loop
GCC 4.3.3 and 4.4.1 happily moves the dword load instruction out of the
loop in orion_nand_read_buf. This patch makes the instruction volatile
to avoid the issue. I've discussed this at gcc-help, refer to the thread
at

  http://gcc.gnu.org/ml/gcc-help/2009-08/msg00187.html

The early clobber is added to avoid the destination registers and the
source register overlapping.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-08-24 11:56:00 -04:00
Artem Bityutskiy de75c771b4 UBI: improve NOR flash erasure quirk
More testing of NOR flash against power cuts showed that sometimes
eraseblocks may be unwritable, and we cannot really invalidate
them before erasure. But in this case the eraseblock probably
contains garbage anyway, and we do not have to invalidate the
headers. This assumption might be not true, but this is at least
what I have observed. So if we cannot invalidate the headers,
we make sure that the PEB does not contain valid VID header.
If this is true, everything is fine, otherwise we panic.
2009-08-14 20:02:20 +03:00
Artem Bityutskiy 867996b15c UBI: introduce flash dump helper
Useful for debugging problems, compiled in only if UBI debugging
is enabled. This patch also makes the UBI writing function dump
the flash if it fails to write.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-08-14 20:02:20 +03:00
Phil Carmody 758d8e4634 UBI: eliminate possible undefined behaviour
The assignment to pos when rb is finally NULL is undefined behaviour.
Upon seeing that assignment, GCC may assume that rb is not NULL, and
the loop condition ``rb'' may be optimised away.

Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-08-14 20:01:36 +03:00
Artem Bityutskiy 4a406856ea UBI: print a warning if too many PEBs are corrupted
There was a bug report recently where UBI prints:

UBI error: ubi_attach_mtd_dev: failed to attach by scanning, error -22

error messages and refuses to attach a PEB. It turned out to be a
buggy flash driver which returned garbage to almost every UBI read.
This patch makes UBI print a better message in such cases. Namely,
if UBI finds 8 or more corrupted PEBs, it prints a warning and
lists the corrupted PEBs.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-08-14 20:01:36 +03:00
Artem Bityutskiy 5b289b562f UBI: amend NOR flash pre-erase quirk
In case of NOR flash, UBI zeroes EC and VID headers' magic,
in order to detect interrupted erasures. It first zeroes out
the EC magic, then VID magic. However, if a power cut happens
in between, we'll end up with a corrupted EC header and a valid
VID header, in which case UBI accepts the PEB, but prints a
warning. This patch makes sure we first zero out the VID
magic, then the EC magic, not vice versa. This is just a
small amendment to prevent warning messages.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-08-14 20:01:36 +03:00
Artem Bityutskiy 29a88c99d2 UBI: print a message if ECH is corrupted and VIDH is ok
If the EC header is corrupted, but the VID header is OK, UBI accepts the
PEB and treats it as "used". However, generally this should not happen.
Print a warning if this happens.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-08-14 20:01:35 +03:00
Jeff Garzik 67fe068808 Remove zero-length file drivers/mtd/maps/sbc8240.c
It was "deleted" in commit 2bf961b7cc

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-08-12 06:29:57 -04:00
Linus Torvalds f4b9a98868 Merge branch 'for-linus' of git://git.infradead.org/ubi-2.6
* 'for-linus' of git://git.infradead.org/ubi-2.6:
  UBI: compatible fallback in absense of sequence numbers
  UBI: fix double free on error path
2009-08-09 14:58:34 -07:00
Matthias Kaehlcke d676c11727 mtd: mtdblock: introduce mtdblks_lock
The mtdblks array and its content are prone to race conditions. Introduce
the mutex mtdblks_lock in order to solve this.

[Amended by Artem Bityutskiy]

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-08-03 14:25:00 +01:00
Subrata Modak 2bf961b7cc mtd: remove 'SBC8240 Wind River' Device Driver Code
This driver is causing build errors and is no longer needed -- it is obsoleted
by physmap_of.

Signed-off-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Tested-on-PPC64-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-08-03 14:22:54 +01:00
Mika Korhonen 3cae1cc149 mtd: OneNAND: OMAP2/3: free GPMC CS on module removal
GPMC CS was not freed in omap2_onenand_remove() preventing the module
from reloading after removal.

Signed-off-by: Mika Korhonen <ext-mika.2.korhonen@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-08-03 14:22:16 +01:00
Mika Korhonen 00acf4a807 mtd: OneNAND: fix incorrect bufferram offset
Fixes the case where CONFIG_MTD_ONENAND_2X_PROGRAM is set and
the real page size differs from mtd_info.writesize.

Signed-off-by: Mika Korhonen <mika.j.korhonen@gmail.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-08-03 14:21:58 +01:00
Artem Bityutskiy 8022c13c27 mtd: blkdevs: do not forget to get MTD devices
Nowadays MTD devices have to be "get" before they can be
used. This has to be done with 'get_mtd_device()'. The
'blktrans_open()' function did not do this and instead
used 'try_module_get()'. Fix this.

Since 'get_mtd_device()' already gets the module, extra
'try_module_get()' is not needed.

This fixes oops when one tries to use mtdblock on top of
gluebi.

Reported-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-08-03 14:20:26 +01:00
Saeed Bishara 6afc4fdb3e mtd: fix the conversion from dev to mtd_info
The patch fixes a bug when converting dev to mtd_info by using the
drvdata of the dev, the previous code used
container_of(dev, struct mtd_info, dev), but won't work for the mtdXro
devices as they created without being contained inside mtd_info structure.

Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-08-03 14:16:01 +01:00
Adrian Hunter 32bc482028 UBI: compatible fallback in absense of sequence numbers
Fall back onto thinking everything's OK if either of the sequence
numbers we are asked to compare is zero, which is what was used
before sequence numbers were introduced.

[ Artem: modified the patch to be applicable to upstream UBI, added
        big comment ]

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-24 20:08:52 +03:00
Adrian Hunter 7194e6f9c0 UBI: fix double free on error path
If we fail in 'ubi_eba_init_scan()', we free
'ubi->volumes[i]->eba_tbl' in there, but also later free it
in 'free_internal_volumes()'. Fix this by assigning NULL
to 'ubi->volumes[i]->eba_tbl' after it is freed.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-24 20:08:52 +03:00
Holger Brunck 3dc948da78 UBI: fix bug in image sequence number handling
This patch fixes a bug in the image seq. number handling in the
scanning level. The assignment of the image_seq was incorrect.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-15 11:30:59 +03:00
Artem Bityutskiy c8cc452501 UBI: gluebi: initialize ubi_num field
Do not forget to initialize 'gluebi->ubi_num' because otherwise
it will stay 0 even for ubi1 device, and gluebi will open
wrong UBI device when 'gluebi_get_device()' is called.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-15 11:30:55 +03:00
Hartley Sweeten 583ddafe17 [ARM] 5592/1: ep93xx: cleanup platform header includes
arch/arm/mach-ep93xx/include/mach/hardware.h
  1. Properly name the include files so that they are loaded
     from the <mach/*> directory and not the local directory.
  2. Remove including the ts72xx.h header.  This header is not
     generic to the ep93xx platform.  It should only be included
     by the ts72xx specific files that require it.  The only
     two users in the tree are arch/arm/mach-ep93xx/ts72xx.c
     and drivers/mtd/nand/ts7250.c.

arch/arm/mach-ep93xx/include/mach/ts72xx.h
  1. <linux/io.h> should already be included by any user of this
     header.  Doing the include here hides it from being needed
     by the calling source file.

arch/arm/mach-ep93xx/core.c
  1. Remove unnecessary headers.  They were probably included
     originally due to cut-and-paste from other files.
  2. <linux/io.h> should be included not <mach/gpio.h>

arch/arm/mach-ep93xx/adsphere.c
arch/arm/mach-ep93xx/edb93xx.c
arch/arm/mach-ep93xx/gesbc9312.c
arch/arm/mach-ep93xx/micro9.c
arch/arm/mach-ep93xx/ts72xx.c
  1. Remove unnecessary headers.

arch/arm/mach-ep93xx/ts72xx.c
  1. Remove unnecessary headers.
  2. Add platform specific header <mach/ts72xx.h>.

drivers/mtd/nand/ts7250.c
  1. <linux/io.h> should be included not <asm/io.h>.
  2. Add platform specific header <mach/ts72xx.h>.

Cc: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-09 16:13:44 +01:00
Artem Bityutskiy 83c2099f5e UBI: fix compilation warnings
The recent "UBI: fix NOR flash recovery" introduced compilation
warnings which were immediately spotted by our linux-next keeper.
This patch fixes them.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-08 10:15:41 +03:00
Artem Bityutskiy ebf53f4213 UBI: fix NOR flash recovery
This commit fixes NOR flash recovery issues observed with Spansion
S29GL512N NOR.

When NOR erases, it first fills PEBs with zeroes, then sets all bytes
to 0xFF. Filling with zeroes starts from the end of the PEB. And when
power is cut, this results in PEBs containing correct EC and VID headers
but corrupted with zeros at the end. This confuses UBI and it mistakinly
accepts these PEBs and associate them with LEBs.

Fis this issue by zeroing EC and VID magics before erasing PEBs, to
make UBI later refuse zem.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-07 11:37:45 +03:00
Artem Bityutskiy fe96efc1a3 UBI: nicify image sequence number handling
Move the image seq. number handling from I/O level to the scanning
lever, where it really belongs to. Move the @image_seq_set variable
to the @struct ubi_scan_info structure, which exists only during
scanning.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-05 18:47:08 +03:00
Adrian Hunter 0c6c7fa131 UBI: add image sequence number to EC header
An image sequence number is added to the UBI erase-counter header
to be able determine if the root file system contains a mixture
of old and new images (because the flashing failed to complete).

A change to nolo is also needed for this to take effect.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-05 18:47:07 +03:00
Artem Bityutskiy 1398788fe7 UBI: remove bogus debugging checks
The 'paranoid_check_empty()' is bogus because, which is easilly
seen on NOR flash, which has long erase cycles, and which may
easilly end-up with half-erased eraseblocks. In this case the
paranoid check fails. I is just wrong to assume that PEBs which
do not have EC headers always contain all 0xFF. Such assumption
should not be made on the I/O level, which is quite low.

Thus, just kill the check.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-05 18:47:05 +03:00
Artem Bityutskiy 40a71a87fa UBI: add empty eraseblocks verification
This patch adds code which makes sure eraseblocks contain all 0xFF
bytes before starting using them. The verification is done only when
debugging checks are enabled.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-05 18:47:03 +03:00
vimal singh c276aca46d mtd: nand: fix build failure and incorrect return from omap_wait()
We need to include jiffies.h manually in some cases, and the status
returned from omap_wait() was broken in two separate ways.

Also add cond_resched() to the loop.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-28 10:24:13 +01:00
Julia Lawall 70ec3bb8ea mtd: Use BLOCK_NIL consistently in NFTL/INFTL
Use BLOCK_NIL consistently rather than sometimes 0xffff and sometimes
BLOCK_NIL.

The semantic patch that finds this issue is below
(http://www.emn.fr/x-info/coccinelle/).  On the other hand, the changes
were made by hand, in part because drivers/mtd/inftlcore.c contains dead
code that causes spatch to ignore a relevant function.  Specifically, the
function INFTL_findwriteunit contains a do-while loop, but always takes a
return that leaves the loop on the first iteration.

// <smpl>
@r exists@
identifier f,C;
@@

f(...) { ... return C; }

@s@
identifier r.C;
expression E;
@@

@@
identifier r.f,r.C,I;
expression s.E;
@@

f(...) {
 <...
(
  I
|
- E
+ C
)
 ...>
}

// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-27 09:22:10 +01:00
Steven A. Falco 89bb871e96 mtd: m25p80 timeout too short for worst-case m25p16 devices
The m25p16 data sheet from numonyx lists the worst-case bulk erase time
(tBE) as 40 seconds.

Signed-off-by: Steven A. Falco <sfalco@harris.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-26 18:15:21 +01:00
Thadeu Lima de Souza Cascardo ae27a7ab2c mtd: atmel_nand: Fix typo s/parititions/partitions/
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-25 08:18:36 +01:00
Thadeu Lima de Souza Cascardo 342ba1039a mtd: cmdlineparts: Use 64-bit format when printing a debug message.
Commit 69423d99fc ("[MTD] update internal 
API to support 64-bit device size") has changed some structure values
to 64-bit and has not updated this debug message, since it's not built 
by default.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-25 08:18:12 +01:00
David Woodhouse 17659c6062 mtd: maps: Remove BUS_ID_SIZE from integrator_flash
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-24 16:02:06 +01:00
Linus Torvalds ac1b7c378e Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (63 commits)
  mtd: OneNAND: Allow setting of boundary information when built as module
  jffs2: leaking jffs2_summary in function jffs2_scan_medium
  mtd: nand: Fix memory leak on txx9ndfmc probe failure.
  mtd: orion_nand: use burst reads with double word accesses
  mtd/nand: s3c6400 support for s3c2410 driver
  [MTD] [NAND] S3C2410: Use DIV_ROUND_UP
  [MTD] [NAND] S3C2410: Deal with unaligned lengths in S3C2440 buffer read/write
  [MTD] [NAND] S3C2410: Allow the machine code to get the BBT table from NAND
  [MTD] [NAND] S3C2410: Added a kerneldoc for s3c2410_nand_set
  mtd: physmap_of: Add multiple regions and concatenation support
  mtd: nand: max_retries off by one in mxc_nand
  mtd: nand: s3c2410_nand_setrate(): use correct macros for 2412/2440
  mtd: onenand: add bbt_wait & unlock_all as replaceable for some platform
  mtd: Flex-OneNAND support
  mtd: nand: add OMAP2/OMAP3 NAND driver
  mtd: maps: Blackfin async: fix memory leaks in probe/remove funcs
  mtd: uclinux: mark local stuff static
  mtd: uclinux: do not allow to be built as a module
  mtd: uclinux: allow systems to override map addr/size
  mtd: blackfin NFC: fix hang when using NAND on BF527-EZKITs
  ...
2009-06-22 16:56:22 -07:00
Linus Torvalds b069e8ed4d Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6
* 'linux-next' of git://git.infradead.org/ubi-2.6: (21 commits)
  UBI: add reboot notifier
  UBI: handle more error codes
  UBI: fix multiple spelling typos
  UBI: fix kmem_cache_free on error patch
  UBI: print amount of reserved PEBs
  UBI: improve messages in the WL worker
  UBI: make gluebi a separate module
  UBI: remove built-in gluebi
  UBI: add notification API
  UBI: do not switch to R/O mode on read errors
  UBI: fix and clean-up error paths in WL worker
  UBI: introduce new constants
  UBI: fix race condition
  UBI: minor serialization fix
  UBI: do not panic if volume check fails
  UBI: add dump_stack in checking code
  UBI: fix races in I/O debugging checks
  UBI: small debugging code optimization
  UBI: improve debugging messages
  UBI: re-name volumes_mutex to device_mutex
  ...
2009-06-17 09:48:30 -07:00
Amul Saha c90173f090 mtd: OneNAND: Allow setting of boundary information when built as module
This patch unifies the flex_bdry setting for module vs. built-in 
configuration of OneNAND.

Signed-off-by: Amul Kumar Saha <amul.saha@samsung.com>
Signed-off-by: Vishak G <vishak.g@samsung.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-16 08:43:33 +01:00
Linus Torvalds 489f7ab6c1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (31 commits)
  trivial: remove the trivial patch monkey's name from SubmittingPatches
  trivial: Fix a typo in comment of addrconf_dad_start()
  trivial: usb: fix missing space typo in doc
  trivial: pci hotplug: adding __init/__exit macros to sgi_hotplug
  trivial: Remove the hyphen from git commands
  trivial: fix ETIMEOUT -> ETIMEDOUT typos
  trivial: Kconfig: .ko is normally not included in module names
  trivial: SubmittingPatches: fix typo
  trivial: Documentation/dell_rbu.txt: fix typos
  trivial: Fix Pavel's address in MAINTAINERS
  trivial: ftrace:fix description of trace directory
  trivial: unnecessary (void*) cast removal in sound/oss/msnd.c
  trivial: input/misc: Fix typo in Kconfig
  trivial: fix grammo in bus_for_each_dev() kerneldoc
  trivial: rbtree.txt: fix rb_entry() parameters in sample code
  trivial: spelling fix in ppc code comments
  trivial: fix typo in bio_alloc kernel doc
  trivial: Documentation/rbtree.txt: cleanup kerneldoc of rbtree.txt
  trivial: Miscellaneous documentation typo fixes
  trivial: fix typo milisecond/millisecond for documentation and source comments.
  ...
2009-06-14 13:46:25 -07:00
Linus Torvalds 2cf4d4514d Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
  MAINTAINERS: EB110ATX is not ebsa110
  MAINTAINERS: update Eric Miao's email address and status
  fb: add support of LCD display controller on pxa168/910 (base layer)
  [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
  [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
  [ARM] 5544/1: Trust PrimeCell resource sizes
  [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
  [ARM] pxa/sharpsl_pm: drop set_irq_type calls
  [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
  [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
  [ARM] sa1100: remove unused collie_pm.c
  [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
  [ARM] 5550/1: Add default configure file for w90p910 platform
  [ARM] 5549/1: Add clock api for w90p910 platform.
  [ARM] 5548/1: Add gpio api for w90p910 platform
  [ARM] 5551/1: Add multi-function pin api for w90p910 platform.
  [ARM] Make ARM_VIC_NR depend on ARM_VIC
  [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
  ARM: OMAP4: SMP: Update defconfig for OMAP4430
  ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  ...
2009-06-14 13:42:43 -07:00
Pavel Machek 4737f0978d trivial: Kconfig: .ko is normally not included in module names
.ko is normally not included in Kconfig help, make it consistent.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 18:01:50 +02:00
Paulius Zaleckas 0b1b51f50e trivial: mtd: fix Kconfig comment about 'armflash'
The real 'armflash' map driver is selected by CONFIG_MTD_ARM_INTEGRATOR

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 18:01:45 +02:00
Linus Torvalds c9059598ea Merge branch 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits)
  block: add request clone interface (v2)
  floppy: fix hibernation
  ramdisk: remove long-deprecated "ramdisk=" boot-time parameter
  fs/bio.c: add missing __user annotation
  block: prevent possible io_context->refcount overflow
  Add serial number support for virtio_blk, V4a
  block: Add missing bounce_pfn stacking and fix comments
  Revert "block: Fix bounce limit setting in DM"
  cciss: decode unit attention in SCSI error handling code
  cciss: Remove no longer needed sendcmd reject processing code
  cciss: change SCSI error handling routines to work with interrupts enabled.
  cciss: separate error processing and command retrying code in sendcmd_withirq_core()
  cciss: factor out fix target status processing code from sendcmd functions
  cciss: simplify interface of sendcmd() and sendcmd_withirq()
  cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code
  cciss: Use schedule_timeout_uninterruptible in SCSI error handling code
  block: needs to set the residual length of a bidi request
  Revert "block: implement blkdev_readpages"
  block: Fix bounce limit setting in DM
  Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt
  ...

Manually fix conflicts with tracing updates in:
	block/blk-sysfs.c
	drivers/ide/ide-atapi.c
	drivers/ide/ide-cd.c
	drivers/ide/ide-floppy.c
	drivers/ide/ide-tape.c
	include/trace/events/block.h
	kernel/trace/blktrace.c
2009-06-11 11:10:35 -07:00
Kevin Cernekee d9dd0887cc UBI: add reboot notifier
Terminate the UBI background thread prior to restarting the system.

[Artem: amended comments a little]

Signed-off-by: Kevin Cernekee <kpc.mtd@gmail.com>
Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-10 16:50:50 +03:00
Artem Bityutskiy 6b5c94c6b4 UBI: handle more error codes
The UBIFS WL worker may encounter read errors and there is logic
which makes a decision whether we should do one of:

1. cancel the operation and move the PEB with the read errors to
   the 'erroneous' list;
2. switch to R/O mode.

ATM, only -EIO errors trigger 1., other errors trigger 2. The idea
is that if we know we encountered an I/O error, do 1. Otherwise,
we do not know how to react, and do 2., just in case. E.g., if
the underlying driver became crazy because of a bug, we do not
want to harm any data, and switch to R/O mode.

This patch does 2 things:
1. Makes sure reads from the source PEB always cause 1. This is
   more consistent with other reads which come from the upper
   layers and never cause R/O.
2. Teaches UBI to do 1. also on -EBADMSG, UBI_IO_BAD_VID_HDR,
   -ENOMEM, and -ETIMEOUT. But this is only when reading the
   target PEB.

This preblems were hunted by Adrian Hunter.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-10 16:13:28 +03:00
Artem Bityutskiy 815bc5f8fe UBI: fix multiple spelling typos
Some of the typos were indicated by Adrian Hunter,
some by 'aspell'.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-10 16:13:27 +03:00
Artem Bityutskiy 21d08bbcb1 UBI: fix kmem_cache_free on error patch
'kmem_cache_free()' oopeses if NULL is passed, and there is
one error-path place where UBI may call it with NULL object.
This problem was pointed to by Adrian Hunter.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-10 16:13:27 +03:00
Artem Bityutskiy 52b605d107 UBI: print amount of reserved PEBs
When marking a PEB as bad, print how many PEBs are left reserved.
This is very useful information.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-09 18:49:51 +03:00
Atsushi Nemoto 272023df26 mtd: nand: Fix memory leak on txx9ndfmc probe failure.
Commit 81933046ef ('mtd: Fix handling of
mtdname in txx9ndfmc.c') introduced a potential memory leak. The
'mtdname' member of the private data structure is now allocated
separately, but was not freed on certain error paths.

Fix that, and make things simpler by _always_ allocating it separately
so that we don't need 'if (mtdname != dev_name()) kfree(mtdname);'...
which gets ugly now that we're doing it more than once, and more likely
that we'll get it wrong some time.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-09 14:31:15 +01:00
Russell King 7698fdedcf Merge branch 'for-rmk' of git://git.marvell.com/orion into devel 2009-06-08 19:27:13 +01:00
Nicolas Pitre bfee1a4311 mtd: orion_nand: use burst reads with double word accesses
This is not 8 times faster than byte access, but still around 60% faster.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-08 12:26:59 +01:00
Peter Korsgaard 9dbc090274 mtd/nand: s3c6400 support for s3c2410 driver
Add s3c6400 support to the s3c2410 driver. The nand controller in
the s3c64xx devices is compatible with the one in the s3c2412, so
simply reuse that code.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-08 12:23:23 +01:00
David Woodhouse e635a01ea0 Merge branch 'next-mtd' of git://aeryn.fluff.org.uk/bjdooks/linux 2009-06-08 12:21:27 +01:00
Ben Dooks 947391cfba [MTD] [NAND] S3C2410: Use DIV_ROUND_UP
Change to using DIV_ROUND_UP() in the timing calculation
instead of blindly doing result++

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-08 12:10:37 +01:00
Ben Dooks dea2aa6fd7 [MTD] [NAND] S3C2410: Deal with unaligned lengths in S3C2440 buffer read/write
Add code to deal with fractional lengths, as reported by
Werner Almesberger. Re-work of his original patch.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-08 12:10:36 +01:00
Michel Pollet 9db41f9edc [MTD] [NAND] S3C2410: Allow the machine code to get the BBT table from NAND
Added a flag to allow the machine code to tell the NAND
subsystem that it should try to pickup a BBT from the flash,
and also skip the NAND full scan at startup.

Signed-off-by: Michel Pollet <buserror@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-08 12:10:36 +01:00
Artem Bityutskiy 9c259a52fa UBI: improve messages in the WL worker
Print not only the PEB number, but also the LEB number and volume id,
which is very useful for bug hunting.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-08 13:05:43 +03:00
Stefan Roese 143070e746 mtd: physmap_of: Add multiple regions and concatenation support
This patch adds support to handle multiple non-identical chips in one
flash device tree node. It also adds concat support to physmap_of. This
makes it possible to support e.g. the Intel P30 48F4400 chips which
internally consists of 2 non-identical NOR chips on one die. Additionally
partitions now can span over multiple chips.

To describe such a chip's, multiple "reg" tuples are now supported in one
flash device tree node. Here an dts example:

        flash@f0000000,0 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "cfi-flash";
                reg = <0 0x00000000 0x02000000
                       0 0x02000000 0x02000000>;
                bank-width = <2>;
                partition@0 {
                        label = "test-part1";
                        reg = <0 0x04000000>;
                };
        };

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-06 08:27:42 +01:00
Roel Kluin 43950a605d mtd: nand: max_retries off by one in mxc_nand
with `while (max_retries-- > 0)' max_retries reaches -1 after the loop.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 21:33:14 +01:00
Peter Korsgaard a755a3858f mtd: nand: s3c2410_nand_setrate(): use correct macros for 2412/2440
Use the correct S3C2440_NFCONF_* macros for the mask for the 2412/2440
variants instead of the 2410 ones which use wrong bit positions.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 21:27:05 +01:00
Kevin Hilman cd24f8c1e7 mtd: davinci nand: update clock naming
DaVinci clock support has been updated in mainline.
Update clock names accordingly.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-05 11:54:17 -07:00
Kyungmin Park 31bb999ee7 mtd: onenand: add bbt_wait & unlock_all as replaceable for some platform
Add bbt_wait & unlock_all as replaceable for some platform such as
  s3c64xx s3c64xx has its own OneNAND controller and another interface

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 18:59:34 +01:00
Rohit Hagargundgi 5988af2319 mtd: Flex-OneNAND support
Add support for Samsung Flex-OneNAND devices.

Flex-OneNAND combines SLC and MLC technologies into a single device.
SLC area provides increased reliability and speed, suitable for storing
code such as bootloader, kernel and root file system.  MLC area
provides high density and is suitable for storing user data.

SLC and MLC regions can be configured through kernel parameter.

[akpm@linux-foundation.org: export flexoand_region and onenand_addr]
Signed-off-by: Rohit Hagargundgi <h.rohit@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Vishak G <vishak.g@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 18:59:21 +01:00
Vimal Singh 67ce04bf27 mtd: nand: add OMAP2/OMAP3 NAND driver
This driver is present in the OMAP tree, now pushing it to MTD.

Original author(s):
       Jian Zhang <jzhang@ti.com>

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Cc: Jian Zhang <jzhang@ti.com>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 18:57:09 +01:00
Mike Frysinger 4938c88c92 mtd: maps: Blackfin async: fix memory leaks in probe/remove funcs
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 18:35:44 +01:00
Mike Frysinger 9f31f4b9dc mtd: uclinux: mark local stuff static
The uclinux_ram_mtdinfo, uclinux_romfs, and uclinux_point symbols do not
need to be visible outside of this module, so mark them static.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Greg Ungerer <gerg@uclinux.org>
CC: uclinux-dev@uclinux.org
CC: linux-mtd@lists.infradead.org
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 18:29:35 +01:00
Mike Frysinger 6ae392ccad mtd: uclinux: do not allow to be built as a module
There isn't any benefit to building the uClinux MTD map as a module as the
rootfs it requires in order to actually be usable is appended to the
kernel image, not the module.  No known system builds it this way either,
so change the option to "bool".

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Paul Mundt <lethal@linux-sh.org>
CC: Greg Ungerer <gerg@uclinux.org>
CC: uclinux-dev@uclinux.org
CC: linux-mtd@lists.infradead.org
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 18:29:25 +01:00
Mike Frysinger fa254ecbcc mtd: uclinux: allow systems to override map addr/size
Due to a processor anomaly (05000263 to be exact), most Blackfin parts
cannot keep the embedded filesystem image directly after the kernel in
RAM.  Instead, the filesystem needs to be relocated to the end of memory.
As such, we need to tweak the map addr/size during boot for Blackfin
systems.  This can be done in any early arch/board init code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Paul Mundt <lethal@linux-sh.org>
CC: Greg Ungerer <gerg@uclinux.org>
CC: uclinux-dev@uclinux.org
CC: linux-mtd@lists.infradead.org
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 18:29:14 +01:00
Cliff Cai c3a9f35673 mtd: blackfin NFC: fix hang when using NAND on BF527-EZKITs
The DMAs have different bit sizes on BF52x and BF54x.  From the PHRM:

"The 16-bit DMA Access Bus (DAB) connects the DMA controller to the
on-chip peripherals, PPI, SPI, Ethernet MAC, the SPORTs, NFC,
HOSTDP and the UARTs."

32-bit DMA won't work for BF52x.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 18:27:43 +01:00
Mike Frysinger 530c3b6065 mtd: blackfin NFC: remove pointless return value in bf5xx_nand_dma_rw
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 18:17:26 +01:00
Simon Polette f4fa697c26 mtd: add on-flash BBT support for Atmel NAND driver
Just add a new on-flash-bbt module parameter.

Signed-off-by: Simon Polette <spolette@adetelgroup.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 18:16:31 +01:00
Vladimir Barinov bd3fd62ecc mtd: MXC NAND support for 2KiB page size flashes
- Add support for 2KiB page size flashes
- Fix page address access for large pages
- Detect oob layout at runtime
- handle pagesize_2k variable
- Fix oob16 layout: reserve location 5 of oob area since it's used for bbt

Signed-off-by: Vladimir Barinov <vova.barinov@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 18:15:41 +01:00
H Hartley Sweeten f36e20c01a mtd: plat_nand: allow platform to set partitions
Add optional callback to allow platform to initialize partitions.

Static partitions on a nand device could vary depending on the size of the
device.  This patch allows an optional platform callback to be used to
setup this partition information at runtime.

Scan order is:
	1) chip.part_probe_types
	2) chip.set_parts
	3) chip.partitions
	4) full mtd device (fallback for no partitions)

Some of the existing nand drivers could possibly be replaced by the
plat_nand driver by using this patch.  These include autcpu12.c and
ts7250.c drivers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 18:11:55 +01:00
H Hartley Sweeten bf95efd41b mtd: plat_nand: add platform probe/remove callbacks
Add optional probe and remove callbacks to the plat_nand driver.

Some platforms may require additional setup, such as configuring the
memory controller, before the nand device can be accessed.  This patch
provides an optional callback to handle this setup as well as a callback
to teardown the setup.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 18:11:13 +01:00
Shane McDonald 4d964824ec mtd: remove pmcmsp-ramroot.c
The RAMROOT function was a successful but non-portable attempt to append
the root filesystem to the end of the kernel image.  The preferred and
portable solution is to use an initramfs instead.

The only user of this function was the msp71xx configuration
in the MIPS architecture; as the use of the RAMROOT has been removed
from that configuration, there are no more users, so this code
can be removed.

Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 18:10:49 +01:00
Mika Korhonen d3412dbd72 mtd: OneNAND: add missing __devexit_p
Add missing __devexit_p wrapper and no more mark shutdown with __devexit.
Fixes build in configurations where devexit functions get discarded.

Signed-off-by: Mika Korhonen <mika.j.korhonen@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 18:10:35 +01:00
Lennert Buytenhek ab1ff210a8 mtd: m25p80: add support for Macronix MX25L12805D
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 18:10:28 +01:00
Daniel Ribeiro e1b158abc5 mtd: CFI 1.0 and CFI 1.1
This patch allows otpinfo for CFI >= 1.0 and burst read for CFI >= 1.1.

references:
1.0:	http://www.datasheetcatalog.org/datasheets2/81/816884_1.pdf

1.1:	http://milkymist.org/doc/MT28F640J3.pdf
	http://www.delorie.com/agenda/specs/29066709.pdf

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 17:55:10 +01:00
Daniel Ribeiro ec2d0d8425 mtd: CFI: quirk for PF38F4476.
This chip reports CFI 1.3, but the CFI PRI is like CFI 1.1. Add a quirk
to pass probe on this chip.

This patch depends on "MTD: CFI 1.0 and CFI 1.1"

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 17:51:07 +01:00
Alexander Clouter d6fed9e9fc mtd: extend plat_nand for (read|write)_buf
This patch adds (write|read)_buf callbacks to plat_nand.

The NAND on the TS-7800 provisioned by the FPGA allows readw() and
readl() to be used which gives a 2.5x speed up.  To be able to use this
from the plat_nand driver a hook for read_buf (and also write_buf whilst
we are in there) need to be made available.  This patch adds the hook.

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 17:50:52 +01:00
Michał Mirosław a0645ce9ba mtd: add SST39SF040 chip to jedec_probe
Add SST39SF040 chip (like SST39SF020A but bigger - 4Mbit).

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 17:50:29 +01:00
David Brownell f19e8999a5 mtd: davinci_nand: cmdlinepart uses MTD IDs
Remove some legacy code from the davinci_nand driver, which made
cmdlinepart ignore the the MTD ID passed to it.  Boards can have
multiple NAND chips, and some do (like the DM357 EVM), so this
dated hack is undesirable.

Correct labels are like "davinci_nand.0" (for chipselect 0).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 17:49:58 +01:00
Adrian Hunter ee8f376889 mtd: OneNAND: add support for OneNAND manufactured by Numonyx
In addition to adding the Numonyx manufacturer code, this patch
also ensures 'sync. write' is disabled when reading identification
data - something that the Numonyx chip objects to, but the
Samsung chip seems to ignore.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 17:49:25 +01:00
Matthieu CASTET 1e42d142e6 mtd: m25p80 nand: add m45pe10 ids
this patch add m45pe10 [1] chip support to the m25p80 driver.

[1] http://www.numonyx.com/Documents/Datasheets/M45PE10.pdf

Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 17:48:30 +01:00
Magnus Lilja b258fd8d04 mtd: mxc_nand: add correct dev_id parameter to free_irq() calls
Make sure to pass the same dev_id data to free_irq() that was
used when calling request_irq(), otherwise we get a warning about
freeing an already free IRQ.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 17:40:30 +01:00
Vimal Singh 260dc003e9 mtd: nand: fix 512 byte software ecc support
Type of 'byte_addr' needes to be 'unsigned int' for 512 byte
ECC support.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 17:40:14 +01:00
David Brownell 6a4123e581 mtd: nand: davinci_nand, 4-bit ECC for smallpage
Minimal support for the 4-bit ECC engine found on DM355, DM365,
DA830/OMAP-L137, and similar recent DaVinci-family chips.

This is limited to small-page flash for now; there are some page
layout issues for large page chips.  Note that most boards using
this engine (like the DM355 EVM) include 2GiB large page chips.

Sanity tested on DM355 EVM after swapping the socketed NAND for
a small-page one.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 17:39:36 +01:00
David Brownell 533a014914 mtd: nand: minor davinci_nand cleanup
Make the DaVinci NAND driver require platform_data with
board-specific configuration.  We can't actually do any
kind of sane job of configuring it otherwise.

Also fix the comment about picking the "best" ECC mode.

We can't do those any more; that relied on knowing what kind
of CPU we're using (they don't all support 4-bit ECC), and
current policy is that drivers not have cpu_is_*() checks.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 17:39:22 +01:00
David Brownell 81d19b04a8 mtd: nand: don't walk past end of oobfree[]
Resolve issue noted by Sneha:  when computing oobavail from
the list of free areas in the OOB, don't assume there will
always be an unused slot at the end.  With ECC_HW_SYNDROME
and 4KiB page chips, it's fairly likely there *won't* be one.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: "Narnakaje, Snehaprabha" <nsnehaprabha@ti.com>"
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 17:39:09 +01:00
Thomas Chou 24b5ce20cc mtd: plat_nand: fix section error
With CONFIG_HOTPLUG=n, the following eror occurred during link:
local symbol 0: discarded in section `.devexit.text' from
drivers/built-in.o

It was caused by improper section reference. The __devexit_p()
should be added to the .remove function.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-05 17:30:31 +01:00
Dmitry Pervushin 2ba3d76a1e UBI: make gluebi a separate module
[Artem: re-worked the patch: made it release resources when the
module is unloaded, made it do module referencing, made it really
independent on UBI, tested it with the UBI test-suite which can
be found in ubi-2.6.git/tests/ubi-tests, re-named most of the
funcs/variables to get rid of the "ubi" word and make names
consistent.]

Signed-off-by: Dmitry Pervushin <dpervushin@embeddedalley.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-03 17:45:23 +03:00
Dmitry Pervushin 518ceef0c9 UBI: remove built-in gluebi
Remove built-in gluebi support. This is a preparation for a
standalone glubi module support

Signed-off-by: Dmitry Pervushin <dpervushin@embeddedalley.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-02 13:53:35 +03:00
Dmitry Pervushin 0e0ee1cc33 UBI: add notification API
UBI volume notifications are intended to create the API to get clients
notified about volume creation/deletion, renaming and re-sizing. A
client can subscribe to these notifications using 'ubi_volume_register()'
and cancel the subscription using 'ubi_volume_unregister()'. When UBI
volumes change, a blocking notifier is called. Clients also can request
"added" events on all volumes that existed before client subscribed
to the notifications.

If we use notifications instead of calling functions like 'ubi_gluebi_xxx()',
we can make the MTD emulation layer to be more flexible: build it as a
separate module and load/unload it on demand.

[Artem: many cleanups, rework locking, add "updated" event, provide
 device/volume info in notifiers]

Signed-off-by: Dmitry Pervushin <dpervushin@embeddedalley.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-02 13:53:35 +03:00
Artem Bityutskiy b86a2c56e5 UBI: do not switch to R/O mode on read errors
This patch improves UBI errors handling. ATM UBI switches to
R/O mode when the WL worker fails to read the source PEB.
This means that the upper layers (e.g., UBIFS) has no
chances to unmap the erroneous PEB and fix the error.
This patch changes this behaviour and makes UBI put PEBs
like this into a separate RB-tree, thus preventing the
WL worker from hitting the same read errors again and
again.

But there is a 10% limit on a maximum amount of PEBs like this.
If there are too much of them, UBI switches to R/O mode.

Additionally, this patch teaches UBI not to panic and
switch to R/O mode if after a PEB has been copied, the
target LEB cannot be read back. Instead, now UBI cancels
the operation and schedules the target PEB for torturing.

The error paths has been tested by ingecting errors
into 'ubi_eba_copy_leb()'.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-02 13:53:35 +03:00
Artem Bityutskiy 87960c0b12 UBI: fix and clean-up error paths in WL worker
This patch fixes the error path in the WL worker - in same cases
UBI oopses when 'goto out_error' happens and e1 or e2 are NULL.
This patch also cleans up the error paths a little. And I have
tested nearly all error paths in the WL worker.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-02 13:53:35 +03:00
Artem Bityutskiy 90bf0265e5 UBI: introduce new constants
This patch is a clean-up and a preparation for the following
patches. It introduece constants for the return values of the
'ubi_eba_copy_leb()' function.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-02 13:53:35 +03:00
Andy Green ed27f02870 [MTD] [NAND] S3C2410: Allow commandline partition processing
This patch allows commandline partition processing to
work with the s3c2410 NAND platform driver.

Signed-off-by: Andy Green <andy@warcat.com>
Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
[ben-linux@fluff.org: Change andy@openmoko.com to andy@warmcat.com]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-30 18:01:10 +01:00
Andy Green ae7304e554 [MTD] [NAND] S3C2410: Fix CFG debug order
Fix NAND CFG debug order.

Signed-off-by: Andy Green <andy@warmcat.com>
Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
[ben-linux@fluff.org: Change andy@openmoko.com to andy@warmcat.com, subject cleanup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-30 18:01:10 +01:00
Nelson Castillo 2612e523dc [MTD] [NAND] S3C2410: Uninitialised variable cleanup
~ Avoid warning without generating code.
  (I don't even get the warning without the macro uninitialized_var).

Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
[ben-linux@fluff.org: subject cleanup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-30 18:01:10 +01:00
Andy Green 8c3e843d56 [MTD] [NAND] S3C2410: NAND ECC by chip rather than global
This makes us take note about the chosen ECC mode per-chip and
not the one set globally.

Signed-off-by: Andy Green <andy@warmcat.com>
Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
[ben-linux@fluff.org: andy@openmoko.com => andy@warmcat.com, rewrite subject]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-30 17:54:40 +01:00
Ben Dooks 3db72151aa [MTD] [NAND] S3C2410: Basic kerneldoc comment updates
Move to using kerneldoc style commenting in the driver

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-30 17:18:15 +01:00
Ben Dooks ec0482e6cf [MTD] [NAND] S3C2410: Move to using platform device table
Commit 57fee4a58f added an
method to specify the platform device compatibility by using
an id-table instead of registering multiple drivers.

Move the S3C24XX NAND driver to using this ID table.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
CC: Eric Miao <eric.miao@marvell.com>
2009-05-30 16:55:29 +01:00
David Woodhouse 0b6585ce05 mtd: Fix pointer handling in compat ioctls to use compat_ptr()
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-29 16:09:08 +01:00
Kevin Cernekee 668ff9ab45 mtd: Handle compat ioctls directly; remove all trace from compat_ioctl.c
Remove all references to MTD ioctls from fs/compat_ioctl.c and let
them all be handled by mtd_compat_ioctl().

Signed-off-by: Kevin Cernekee <kpc.mtd@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-29 15:58:25 +01:00
Kevin Cernekee aea7cea9fa mtd: add OOB ioctls for >4GiB devices
Signed-off-by: Kevin Cernekee <kpc.mtd@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-29 15:27:07 +01:00
Kevin Cernekee 9771854040 mtd: compat_ioctl cleanup
1) Move the MEMREADOOB/MEMWRITEOOB compat_ioctl wrappers from
fs/compat_ioctl.c into mtdchar.c .  Original request was here:

http://lkml.org/lkml/2009/4/1/295

2) Add missing COMPATIBLE_IOCTL lines, so that mtd-utils does not error
out when running in 64/32 compatibility mode.

LKML-Reference: <200904011650.22928.arnd@arndb.de>
Signed-off-by: Kevin Cernekee <kpc.mtd@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-29 15:24:48 +01:00
Kevin Cernekee 0dc54e9f33 mtd: add MEMERASE64 ioctl for >4GiB devices
New MEMERASE/MEMREADOOB/MEMWRITEOOB ioctls are needed in order to support
64-bit offsets into large NAND flash devices.

Signed-off-by: Kevin Cernekee <kpc.mtd@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-29 15:13:47 +01:00
David Woodhouse 81933046ef mtd: Fix handling of mtdname in txx9ndfmc.c
As pointed out by Kay Sievers, the name size limit is gone
from the driver-core, and BUS_ID_SIZE is obsolescent.

Rather than just papering over the problem by replacing the mtdname
array size with an arbitrary '20 + 2', fix the problem properly and
handle arbitrary name sizes.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-29 14:32:39 +01:00
Catalin Marinas 9fd1e8f92a mtd: Add armflash support for multiple blocks of flash
This patch adds MTD concatenation support to integrator-flash.c for
platforms with more than one block of flash memory (e.g. RealView
PB11MPCore). The implementation is based on the sa1100-flash.c one.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-29 14:00:21 +01:00
David Woodhouse 8d42b524f4 mtd: DIL/NetPC broken for now
We'll fix it up again, but for now I don't think anyone really cares.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-29 13:57:56 +01:00
Vladimir Barinov 8541c1180a mtd: MXC NAND driver fixes (v5)
The following patch fixes:
 - re-initialization of host->col_addr which is used as byte index
   between the successive READID flash commands.
 - compile error when CONFIG_PM is enabled
 - pass on the error code from clk_get()
 - return -ENOMEM in case of failed ioremap()
 - pass on the return value of platform_driver_probe() directly
 - remove excessive printk
 - let command line partition table parsing with mxc_nand name.
   The cmd_line parsing is done via <mtd-id> name that differs
   from mxc_nand by default and looks like "NAND 256MiB 1,8V 8-bit"

Signed-off-by: Vladimir Barinov <vbarinov@embeddedalley.com>
Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-29 10:44:05 +01:00
Kevin Hilman 8bd2294922 OMAP2/3: PM: push core PM code from linux-omap
This patch is to sync the core linux-omap PM code with mainline.  This
code has evolved and been used for a while the linux-omap tree, but
the attempt here is to finally get this into mainline.

Following this will be a series of patches from the 'PM branch' of the
linux-omap tree to add full PM hardware support from the linux-omap
tree.

Much of this PM core code was written by Jouni Hogander with
significant contributions from Paul Walmsley as well as many others
from Nokia, Texas Instruments and linux-omap community.

Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-05-28 10:58:50 -07:00
David Woodhouse b90cf6681f [MTD] Remove option for add_mtd_partitions() to not register partitions.
This breaks the dilnetpc map driver, but it could be fixed not to use
that option. We want to simplify the partition handling, and this is a
step towards that.

Remove superfluous 'index' field from private struct mtd_part too, while
we're at it.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-26 16:45:44 +01:00
David Woodhouse 4704a78472 [MTD] Only set partition suspend/resume method if parent not registered
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-26 16:45:44 +01:00
David Woodhouse ccd93854d4 [MTD] Remove mtd->{suspend,resume} calls from board drivers
Now the MTD core will do this for us, we don't need to hook it up from
the board drivers.

Shame we can't do shutdown from the class too...

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-26 16:45:44 +01:00
David Woodhouse 15bce40cb3 [MTD] Restore suspend/resume support for mtd devices
This is intended to suspend/resume the _chip_, while we leave board
drivers to handle their own suspend/resume for the controller.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-26 16:45:43 +01:00
David Woodhouse d694846b6b [MTD] set blkdev parent to the mtd device, not its parent
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-26 16:41:21 +01:00
Artem Bityutskiy ddbd3b6170 UBI: fix race condition
This patch fixes a minor problem where we may fail to wake
upe the UBI background thread. This is not fatal at all,
it may just result at sligtly worse performace for a short
period of time, just because the thread will be woken up
when real I/O on the UBI starts.

Anywey, the issue is the race condition between
'ubi_attach_mtd_dev()' and 'ubi_thread()'. If we do not
serialize them, the 'wake_up_process()' call may be done
before 'ubi_thread()' went seep, but after it checked
'ubi->thread_enabled'.

This issue was spotted by Shin Hong <hongshin@gmail.com>

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-26 12:47:47 +03:00
Martin K. Petersen e1defc4ff0 block: Do away with the notion of hardsect_size
Until now we have had a 1:1 mapping between storage device physical
block size and the logical block sized used when addressing the device.
With SATA 4KB drives coming out that will no longer be the case.  The
sector size will be 4KB but the logical block size will remain
512-bytes.  Hence we need to distinguish between the physical block size
and the logical ditto.

This patch renames hardsect_size to logical_block_size.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 23:22:54 +02:00
Jens Axboe e4b636366c Merge branch 'master' into for-2.6.31
Conflicts:
	drivers/block/hd.c
	drivers/block/mg_disk.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 20:25:34 +02:00
Peter Korsgaard dbf8c11f82 mtd_dataflash: unbreak erase support
Commit 5b7f3a50 (fix dataflash 64-bit divisions) unfortunately
introduced a typo. Erase addr and len were swapped in the pageaddr
calculation, causing the wrong sectors to get erased.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-18 08:36:21 -07:00
Artem Bityutskiy 95c9c1da79 UBI: minor serialization fix
The @vol->upd_marker should be protected by the @ubi->device_mutex,
otherwise 'paranoid_check_volume()' complains sometimes because
vol->upd_marker is 1 while vtbl_rec->upd_marker is 0.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-18 12:28:26 +03:00
Artem Bityutskiy d38dce5bfb UBI: do not panic if volume check fails
If a volume paranoid check fails, do not return an error
code to the caller, but just print error messages and go
forward. The primary reason for this is that it is difficult
to recover and cancel the operation at that stage.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-18 12:28:26 +03:00
Artem Bityutskiy cfcf0ec84b UBI: add dump_stack in checking code
I am experiencing an error in 'paranoid_check_volume()'. Add
dump_stack() there to make it easier to identify the reasons
of the error.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-18 12:28:26 +03:00
Artem Bityutskiy ffb6b7e4fd UBI: fix races in I/O debugging checks
When paranoid checs are enabled, the 'io_paral' test from the
'mtd-utils' package fails. The symptoms are:

UBI error: paranoid_check_all_ff: flash region at PEB 3973:512, length 15872 does not contain all 0xFF bytes
UBI error: paranoid_check_all_ff: paranoid check failed for PEB 3973
UBI: hex dump of the 512-16384 region

It turned out to be a bug in the checking function. Suppose there
are 2 tasks - A and B. Task A is the wear-levelling working
('wear_leveling_worker()'). It is reading the VID header to find
which LEB this PEB belongs to. Say, task A is reading header
of PEB X. Suppose PEB X is unmapped, and has no VID header.
Task B is trying to write to PEB X.

Task A: in 'ubi_io_read_vid_hdr()': reads the VID header from PEB X.
        The read data contain all 0xFF bytes.
Task B: writes VID header and some data to PEB X
Task A: assumes PEB X is empty, calls 'paranoid_check_all_ff()', which
        fails.

The solution for this problem is to make 'paranoid_check_all_ff()'
re-read the VID header, re-check it, and only if it is not there,
check the rest. This now implemented by the 'paranoid_check_empty()'
function.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-18 12:28:25 +03:00
Artem Bityutskiy 2cb81e218f UBI: small debugging code optimization
The @ubi->dbg_peb_buf is needed only when paranoid checks are
enabled, not when debugging in general is enabled.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-18 12:28:25 +03:00
Artem Bityutskiy e1cf7e6dd4 UBI: improve debugging messages
Various minor improvements to the debugging messages which
I found useful while hunting problems.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-18 12:28:25 +03:00
Artem Bityutskiy f089c0b28c UBI: re-name volumes_mutex to device_mutex
The mutex essencially protects the entire UBI device, so the
old @volumes_mutex name is a little misleading.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-18 12:28:24 +03:00
Artem Bityutskiy 383d08e045 UBI: remove redundant mutex
The @mult_mutex does not serve any purpose. We already have
@volumes_mutex and it is enough. The @volume mutex is pushed
down to the 'ubi_rename_volumes()', because we want first
to open all volumes in the exclusive mode, and then lock the
mutex, just like all other ioctl's (remove, re-size, etc) do.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-18 12:26:41 +03:00
Tejun Heo 9934c8c045 block: implement and enforce request peek/start/fetch
Till now block layer allowed two separate modes of request execution.
A request is always acquired from the request queue via
elv_next_request().  After that, drivers are free to either dequeue it
or process it without dequeueing.  Dequeue allows elv_next_request()
to return the next request so that multiple requests can be in flight.

Executing requests without dequeueing has its merits mostly in
allowing drivers for simpler devices which can't do sg to deal with
segments only without considering request boundary.  However, the
benefit this brings is dubious and declining while the cost of the API
ambiguity is increasing.  Segment based drivers are usually for very
old or limited devices and as converting to dequeueing model isn't
difficult, it doesn't justify the API overhead it puts on block layer
and its more modern users.

Previous patches converted all block low level drivers to dequeueing
model.  This patch completes the API transition by...

* renaming elv_next_request() to blk_peek_request()

* renaming blkdev_dequeue_request() to blk_start_request()

* adding blk_fetch_request() which is combination of peek and start

* disallowing completion of queued (not started) requests

* applying new API to all LLDs

Renamings are for consistency and to break out of tree code so that
it's apparent that out of tree drivers need updating.

[ Impact: block request issue API cleanup, no functional change ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: unsik Kim <donari75@gmail.com>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Laurent Vivier <Laurent@lvivier.info>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Stefan Weinhuber <wein@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:52:18 +02:00
Tejun Heo 1498ada7a8 mtd_blkdevs: dequeue in-flight request
mtd_blkdevs processes requests one-by-one synchronously from a kthread
and can be easily converted to dequeueing model.  Convert it.

[ Impact: dequeue in-flight request ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:52:17 +02:00
Tejun Heo 1011c1b9f2 block: blk_rq_[cur_]_{sectors|bytes}() usage cleanup
With the previous changes, the followings are now guaranteed for all
requests in any valid state.

* blk_rq_sectors() == blk_rq_bytes() >> 9
* blk_rq_cur_sectors() == blk_rq_cur_bytes() >> 9

Clean up accessor usages.  Notable changes are

* nbd,i2o_block: end_all used instead of explicit byte count
* scsi_lib: unnecessary conditional on request type removed

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:50:55 +02:00
Tejun Heo 83096ebf12 block: convert to pos and nr_sectors accessors
With recent cleanups, there is no place where low level driver
directly manipulates request fields.  This means that the 'hard'
request fields always equal the !hard fields.  Convert all
rq->sectors, nr_sectors and current_nr_sectors references to
accessors.

While at it, drop superflous blk_rq_pos() < 0 test in swim.c.

[ Impact: use pos and nr_sectors accessors ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Tested-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: Mike Miller <mike.miller@hp.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Dario Ballabio <ballabio_dario@emc.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: unsik Kim <donari75@gmail.com>
Cc: Laurent Vivier <Laurent@lvivier.info>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 09:50:54 +02:00
Al Viro 6f5bbff9a1 Convert obvious places to deactivate_locked_super()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-05-09 10:49:40 -04:00
Linus Torvalds 621c2559c1 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
  mtd: fix timeout in M25P80 driver
  mtd: Bug in m25p80.c during whole-chip erase
  mtd: expose subpage size via sysfs
  mtd: mtd in mtd_release is unused without CONFIG_MTD_CHAR
2009-05-08 17:00:41 -07:00
Peter Horton cd1a6de7d4 mtd: fix timeout in M25P80 driver
Extend erase timeout in M25P80 SPI Flash driver.

The M25P80 drivers fails erasing sectors on a M25P128 because the ready
wait timeout is too short. Change the timeout from a simple loop count to a
suitable number of seconds.

Signed-off-by: Peter Horton <zero@colonel-panic.org>
Tested-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-08 13:51:53 +01:00
Steven A. Falco 3f33b0aaac mtd: Bug in m25p80.c during whole-chip erase
There is a logic error in "whole chip erase" for the m25p80 family.  If
the whole device is successfully erased, erase_chip() will return 0, and
the code will fall through to the "else" clause, and do sector-by-sector
erase in addition to the whole-chip erase.  This patch corrects that.

Also, the MAX_READY_WAIT_COUNT is insufficient for an m25p16 connected
to a 400 MHz powerpc.  Increasing it allows me to successfully program
the device on my board.

Signed-off-by: Steven A. Falco <sfalco@harris.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-29 06:49:28 +01:00