Commit Graph

1559 Commits

Author SHA1 Message Date
Tejun Heo 1ba64edef6 block, sx8: kill blk_insert_request()
The only user left for blk_insert_request() is sx8 and it can be
trivially switched to use blk_execute_rq_nowait() - special requests
aren't included in io stat and sx8 doesn't use block layer tagging.
Switch sx8 and kill blk_insert_requeset().

This patch doesn't introduce any functional difference.

Only compile tested.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:37 +01:00
Shaohua Li 019ceb7d5d block: add missed trace_block_plug
After flush plug list, the list has no request, so we need to add a
trace_block_plug().

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-16 09:21:50 +01:00
Shaohua Li 3540d5e89b block: avoid unnecessary plug list flush
get_request_wait() could sleep and flush the plug list.  If the list is
already flushed, don't flush again.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-16 09:21:50 +01:00
Ben Hutchings 6b76106d8e block: Always check length of all iov entries in blk_rq_map_user_iov()
Even after commit 5478755616
("block: check for proper length of iov entries earlier ...")
we still won't check for zero-length entries after an unaligned
entry.  Remove the break-statement, so all entries are checked.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-13 19:58:09 +01:00
Tejun Heo d0985394e7 block: Revert "[SCSI] genhd: add a new attribute "alias" in gendisk"
This reverts commit a72c5e5eb7.

The commit introduced alias for block devices which is intended to be
used during logging although actual usage hasn't been committed yet.
This approach adds very limited benefit (raw log might be easier to
follow) which can be trivially implemented in userland but has a lot
of problems.

It is much worse than netif renames because it doesn't rename the
actual device but just adds conveninence name which isn't used
universally or enforced.  Everything internal including device lookup
and sysfs still uses the internal name and nothing prevents two
devices from using conflicting alias - ie. sda can have sdb as its
alias.

This has been nacked by people working on device driver core, block
layer and kernel-userland interface and shouldn't have been
upstreamed.  Revert it.

 http://thread.gmane.org/gmane.linux.kernel/1155104
 http://thread.gmane.org/gmane.linux.scsi/68632
 http://thread.gmane.org/gmane.linux.scsi/69776

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
 Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Nao Nishijima <nao.nishijima.xt@hitachi.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-10 09:03:55 +01:00
Linus Torvalds 32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
Linus Torvalds 3d0a8d10cf Merge branch 'for-3.2/drivers' of git://git.kernel.dk/linux-block
* 'for-3.2/drivers' of git://git.kernel.dk/linux-block: (30 commits)
  virtio-blk: use ida to allocate disk index
  hpsa: add small delay when using PCI Power Management to reset for kump
  cciss: add small delay when using PCI Power Management to reset for kump
  xen/blkback: Fix two races in the handling of barrier requests.
  xen/blkback: Check for proper operation.
  xen/blkback: Fix the inhibition to map pages when discarding sector ranges.
  xen/blkback: Report VBD_WSECT (wr_sect) properly.
  xen/blkback: Support 'feature-barrier' aka old-style BARRIER requests.
  xen-blkfront: plug device number leak in xlblk_init() error path
  xen-blkfront: If no barrier or flush is supported, use invalid operation.
  xen-blkback: use kzalloc() in favor of kmalloc()+memset()
  xen-blkback: fixed indentation and comments
  xen-blkfront: fix a deadlock while handling discard response
  xen-blkfront: Handle discard requests.
  xen-blkback: Implement discard requests ('feature-discard')
  xen-blkfront: add BLKIF_OP_DISCARD and discard request struct
  drivers/block/loop.c: remove unnecessary bdev argument from loop_clr_fd()
  drivers/block/loop.c: emit uevent on auto release
  drivers/block/cpqarray.c: use pci_dev->revision
  loop: always allow userspace partitions and optionally support automatic scanning
  ...

Fic up trivial header file includsion conflict in drivers/block/loop.c
2011-11-04 17:22:14 -07:00
Linus Torvalds b4fdcb02f1 Merge branch 'for-3.2/core' of git://git.kernel.dk/linux-block
* 'for-3.2/core' of git://git.kernel.dk/linux-block: (29 commits)
  block: don't call blk_drain_queue() if elevator is not up
  blk-throttle: use queue_is_locked() instead of lockdep_is_held()
  blk-throttle: Take blkcg->lock while traversing blkcg->policy_list
  blk-throttle: Free up policy node associated with deleted rule
  block: warn if tag is greater than real_max_depth.
  block: make gendisk hold a reference to its queue
  blk-flush: move the queue kick into
  blk-flush: fix invalid BUG_ON in blk_insert_flush
  block: Remove the control of complete cpu from bio.
  block: fix a typo in the blk-cgroup.h file
  block: initialize the bounce pool if high memory may be added later
  block: fix request_queue lifetime handling by making blk_queue_cleanup() properly shutdown
  block: drop @tsk from attempt_plug_merge() and explain sync rules
  block: make get_request[_wait]() fail if queue is dead
  block: reorganize throtl_get_tg() and blk_throtl_bio()
  block: reorganize queue draining
  block: drop unnecessary blk_get/put_queue() in scsi_cmd_ioctl() and blk_get_tg()
  block: pass around REQ_* flags instead of broken down booleans during request alloc/free
  block: move blk_throtl prototypes to block/blk.h
  block: fix genhd refcounting in blkio_policy_parse_and_set()
  ...

Fix up trivial conflicts due to "mddev_t" -> "struct mddev" conversion
and making the request functions be of type "void" instead of "int" in
 - drivers/md/{faulty.c,linear.c,md.c,md.h,multipath.c,raid0.c,raid1.c,raid10.c,raid5.c}
 - drivers/staging/zram/zram_drv.c
2011-11-04 17:06:58 -07:00
Tejun Heo 6dd9ad7df2 block: don't call blk_drain_queue() if elevator is not up
blk_cleanup_queue() may be called before elevator is set up on a
queue which triggers the following oops.

 BUG: unable to handle kernel NULL pointer dereference at           (null)
 IP: [<ffffffff8125a69c>] elv_drain_elevator+0x1c/0x70
 ...
 Pid: 830, comm: kworker/0:2 Not tainted 3.1.0-next-20111025_64+ #1590
 Bochs Bochs
 RIP: 0010:[<ffffffff8125a69c>]  [<ffffffff8125a69c>] elv_drain_elevator+0x1c/0x70
 ...
 Call Trace:
  [<ffffffff8125da92>] blk_drain_queue+0x42/0x70
  [<ffffffff8125db90>] blk_cleanup_queue+0xd0/0x1c0
  [<ffffffff81469640>] md_free+0x50/0x70
  [<ffffffff8126f43b>] kobject_release+0x8b/0x1d0
  [<ffffffff81270d56>] kref_put+0x36/0xa0
  [<ffffffff8126f2b7>] kobject_put+0x27/0x60
  [<ffffffff814693af>] mddev_delayed_delete+0x2f/0x40
  [<ffffffff81083450>] process_one_work+0x100/0x3b0
  [<ffffffff8108527f>] worker_thread+0x15f/0x3a0
  [<ffffffff81089937>] kthread+0x87/0x90
  [<ffffffff81621834>] kernel_thread_helper+0x4/0x10

Fix it by making blk_cleanup_queue() check whether q->elevator is set
up before invoking blk_drain_queue.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-03 18:52:11 +01:00
Paul Gortmaker 6adb1236b5 block: Change module.h -> export.h in bsg-lib.c
This file isn't using full modular functionality, and hence
can be "downgraded" to just using the export.h header.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:13 -04:00
Paul Gortmaker d5decd3b95 block: add export.h to files using EXPORT_SYMBOL/THIS_MODULE macros
These files were getting <linux/module.h> via an implicit include
path, but we want to crush those out of existence since they cost
time during compiles of processing thousands of lines of headers
for no reason.  Give them the lightweight header that just contains
the EXPORT_SYMBOL infrastructure.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:12 -04:00
Linus Torvalds ec7ae51753 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits)
  [SCSI] qla4xxx: export address/port of connection (fix udev disk names)
  [SCSI] ipr: Fix BUG on adapter dump timeout
  [SCSI] megaraid_sas: Fix instance access in megasas_reset_timer
  [SCSI] hpsa: change confusing message to be more clear
  [SCSI] iscsi class: fix vlan configuration
  [SCSI] qla4xxx: fix data alignment and use nl helpers
  [SCSI] iscsi class: fix link local mispelling
  [SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA
  [SCSI] aacraid: use lower snprintf() limit
  [SCSI] lpfc 8.3.27: Change driver version to 8.3.27
  [SCSI] lpfc 8.3.27: T10 additions for SLI4
  [SCSI] lpfc 8.3.27: Fix queue allocation failure recovery
  [SCSI] lpfc 8.3.27: Change algorithm for getting physical port name
  [SCSI] lpfc 8.3.27: Changed worst case mailbox timeout
  [SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes
  [SCSI] megaraid_sas: Changelog and version update
  [SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic
  [SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support
  [SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers
  [SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts
  ...
2011-10-28 16:44:18 -07:00
Jens Axboe 334c2b0b8b blk-throttle: use queue_is_locked() instead of lockdep_is_held()
We can't use the latter if !CONFIG_LOCKDEP.

Reported-by: Sedat Dilek <sedat.dilek@googlemail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-25 15:51:48 +02:00
Vivek Goyal a38eb630fa blk-throttle: Take blkcg->lock while traversing blkcg->policy_list
blkcg->policy_list is protected by blkcg->lock. Its not rcu protected
list. So even for readers, they need to take blkcg->lock. There are
few functions which were reading the list without taking lock. Fix it.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-25 15:48:12 +02:00
Vivek Goyal e060f00bee blk-throttle: Free up policy node associated with deleted rule
If a rule is being deleted, free up associated policy node. Otherwise
that memory is leaked.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-25 15:48:12 +02:00
Tao Ma 5e08159197 block: warn if tag is greater than real_max_depth.
In case tag depth is reduced, it is max_depth not real_max_depth.
So we should allow a request with tag >= max_depth, but for a
tag >= real_max_depth, there really should be some problem.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-25 10:20:05 +02:00
Jens Axboe 83157223de Merge branch 'for-linus' into for-3.2/core 2011-10-24 16:24:38 +02:00
Tejun Heo f992ae801a block: make gendisk hold a reference to its queue
The following command sequence triggers an oops.

# mount /dev/sdb1 /mnt
# echo 1 > /sys/class/scsi_device/0\:0\:1\:0/device/delete
# umount /mnt

 general protection fault: 0000 [#1] PREEMPT SMP
 CPU 2
 Modules linked in:

 Pid: 791, comm: umount Not tainted 3.1.0-rc3-work+ #8 Bochs Bochs
 RIP: 0010:[<ffffffff810d0879>]  [<ffffffff810d0879>] __lock_acquire+0x389/0x1d60
...
 Call Trace:
  [<ffffffff810d2845>] lock_acquire+0x95/0x140
  [<ffffffff81aed87b>] _raw_spin_lock+0x3b/0x50
  [<ffffffff811573bc>] bdi_lock_two+0x5c/0x70
  [<ffffffff811c2f6c>] bdev_inode_switch_bdi+0x4c/0xf0
  [<ffffffff811c3fcb>] __blkdev_put+0x11b/0x1d0
  [<ffffffff811c4010>] __blkdev_put+0x160/0x1d0
  [<ffffffff811c40df>] blkdev_put+0x5f/0x190
  [<ffffffff8118f18d>] kill_block_super+0x4d/0x80
  [<ffffffff8118f4a5>] deactivate_locked_super+0x45/0x70
  [<ffffffff8119003a>] deactivate_super+0x4a/0x70
  [<ffffffff811ac4ad>] mntput_no_expire+0xed/0x130
  [<ffffffff811acf2e>] sys_umount+0x7e/0x3a0
  [<ffffffff81aeeeab>] system_call_fastpath+0x16/0x1b

This is because bdev holds on to disk but disk doesn't pin the
associated queue.  If a SCSI device is removed while the device is
still open, the sdev puts the base reference to the queue on release.
When the bdev is finally released, the associated queue is already
gone along with the bdi and bdev_inode_switch_bdi() ends up
dereferencing already freed bdi.

Even if it were not for this bug, disk not holding onto the associated
queue is very unusual and error-prone.

Fix it by making add_disk() take an extra reference to its queue and
put it on disk_release() and ensuring that disk and its fops owner are
put in that order after all accesses to the disk and queue are
complete.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-24 16:24:31 +02:00
Jeff Moyer e67b77c791 blk-flush: move the queue kick into
A dm-multipath user reported[1] a problem when trying to boot
a kernel with commit 4853abaae7
(block: fix flush machinery for stacking drivers with differring
flush flags) applied.  It turns out that an empty flush request
can be sent into blk_insert_flush.  When the BUG_ON was fixed
to allow for this, I/O on the underlying device would stall.  The
reason is that blk_insert_cloned_request does not kick the queue.
In the aforementioned commit, I had added a special case to
kick the queue if data was sent down but the queue flags did
not require a flush.  A better solution is to push the queue
kick up into blk_insert_cloned_request.

This patch, along with a follow-on which fixes the BUG_ON, fixes
the issue reported.

[1] http://www.redhat.com/archives/dm-devel/2011-September/msg00154.html

Reported-by: Christophe Saout <christophe@saout.de>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>

Stable note: 3.1
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-24 16:24:31 +02:00
Jeff Moyer 834f9f61a5 blk-flush: fix invalid BUG_ON in blk_insert_flush
A user reported a regression due to commit
4853abaae7 (block: fix flush
machinery for stacking drivers with differring flush flags).
Part of the problem is that blk_insert_flush required a
single bio be attached to the request.  In reality, having
no attached bio is also a valid case, as can be observed with
an empty flush.

[1] http://www.redhat.com/archives/dm-devel/2011-September/msg00154.html

Reported-by: Christophe Saout <christophe@saout.de>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com
Acked-by: Tejun Heo <tj@kernel.org>

Stable note: 3.1
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-24 16:24:30 +02:00
Tao Ma 9562ad9ab3 block: Remove the control of complete cpu from bio.
bio originally has the functionality to set the complete cpu, but
it is broken.

Chirstoph said that "This code is unused, and from the all the
discussions lately pretty obviously broken.  The only thing keeping
it serves is creating more confusion and possibly more bugs."

And Jens replied with "We can kill bio_set_completion_cpu(). I'm fine
with leaving cpu control to the request based drivers, they are the
only ones that can toggle the setting anyway".

So this patch tries to remove all the work of controling complete cpu
from a bio.

Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-24 16:11:30 +02:00
Jie Liu e890413af4 block: fix a typo in the blk-cgroup.h file
byptes -> bytes.

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-24 16:08:38 +02:00
Tejun Heo c9a929dde3 block: fix request_queue lifetime handling by making blk_queue_cleanup() properly shutdown
request_queue is refcounted but actually depdends on lifetime
management from the queue owner - on blk_cleanup_queue(), block layer
expects that there's no request passing through request_queue and no
new one will.

This is fundamentally broken.  The queue owner (e.g. SCSI layer)
doesn't have a way to know whether there are other active users before
calling blk_cleanup_queue() and other users (e.g. bsg) don't have any
guarantee that the queue is and would stay valid while it's holding a
reference.

With delay added in blk_queue_bio() before queue_lock is grabbed, the
following oops can be easily triggered when a device is removed with
in-flight IOs.

 sd 0:0:1:0: [sdb] Stopping disk
 ata1.01: disabled
 general protection fault: 0000 [#1] PREEMPT SMP
 CPU 2
 Modules linked in:

 Pid: 648, comm: test_rawio Not tainted 3.1.0-rc3-work+ #56 Bochs Bochs
 RIP: 0010:[<ffffffff8137d651>]  [<ffffffff8137d651>] elv_rqhash_find+0x61/0x100
 ...
 Process test_rawio (pid: 648, threadinfo ffff880019efa000, task ffff880019ef8a80)
 ...
 Call Trace:
  [<ffffffff8137d774>] elv_merge+0x84/0xe0
  [<ffffffff81385b54>] blk_queue_bio+0xf4/0x400
  [<ffffffff813838ea>] generic_make_request+0xca/0x100
  [<ffffffff81383994>] submit_bio+0x74/0x100
  [<ffffffff811c53ec>] dio_bio_submit+0xbc/0xc0
  [<ffffffff811c610e>] __blockdev_direct_IO+0x92e/0xb40
  [<ffffffff811c39f7>] blkdev_direct_IO+0x57/0x60
  [<ffffffff8113b1c5>] generic_file_aio_read+0x6d5/0x760
  [<ffffffff8118c1ca>] do_sync_read+0xda/0x120
  [<ffffffff8118ce55>] vfs_read+0xc5/0x180
  [<ffffffff8118cfaa>] sys_pread64+0x9a/0xb0
  [<ffffffff81afaf6b>] system_call_fastpath+0x16/0x1b

This happens because blk_queue_cleanup() destroys the queue and
elevator whether IOs are in progress or not and DEAD tests are
sprinkled in the request processing path without proper
synchronization.

Similar problem exists for blk-throtl.  On queue cleanup, blk-throtl
is shutdown whether it has requests in it or not.  Depending on
timing, it either oopses or throttled bios are lost putting tasks
which are waiting for bio completion into eternal D state.

The way it should work is having the usual clear distinction between
shutdown and release.  Shutdown drains all currently pending requests,
marks the queue dead, and performs partial teardown of the now
unnecessary part of the queue.  Even after shutdown is complete,
reference holders are still allowed to issue requests to the queue
although they will be immmediately failed.  The rest of teardown
happens on release.

This patch makes the following changes to make blk_queue_cleanup()
behave as proper shutdown.

* QUEUE_FLAG_DEAD is now set while holding both q->exit_mutex and
  queue_lock.

* Unsynchronized DEAD check in generic_make_request_checks() removed.
  This couldn't make any meaningful difference as the queue could die
  after the check.

* blk_drain_queue() updated such that it can drain all requests and is
  now called during cleanup.

* blk_throtl updated such that it checks DEAD on grabbing queue_lock,
  drains all throttled bios during cleanup and free td when queue is
  released.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19 14:42:16 +02:00
Tejun Heo bd87b5898a block: drop @tsk from attempt_plug_merge() and explain sync rules
attempt_plug_merge() accesses elevator without holding queue_lock and
may call into ->elevator_bio_merge_fn().  The elvator is guaranteed to
be valid because it's accessed iff the plugged list has requests and
elevator is never exited with live requests, so as long as the
elevator method can deal with unlocked access, this is safe.

Explain the sync rules around attempt_plug_merge() and drop the
unnecessary @tsk parameter.

This patch doesn't introduce any functional change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19 14:33:08 +02:00
Tejun Heo da8303c63b block: make get_request[_wait]() fail if queue is dead
Currently get_request[_wait]() allocates request whether queue is dead
or not.  This patch makes get_request[_wait]() return NULL if @q is
dead.  blk_queue_bio() is updated to fail the submitted bio if request
allocation fails.  While at it, add docbook comments for
get_request[_wait]().

Note that the current code has rather unclear (there are spurious DEAD
tests scattered around) assumption that the owner of a queue
guarantees that no request travels block layer if the queue is dead
and this patch in itself doesn't change much; however, this will allow
fixing the broken assumption in the next patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19 14:33:05 +02:00
Tejun Heo bc16a4f933 block: reorganize throtl_get_tg() and blk_throtl_bio()
blk_throtl_bio() and throtl_get_tg() have rather unusual interface.

* throtl_get_tg() returns pointer to a valid tg or ERR_PTR(-ENODEV),
  and drops queue_lock in the latter case.  Different locking context
  depending on return value is error-prone and DEAD state is scheduled
  to be protected by queue_lock anyway.  Move DEAD check inside
  queue_lock and return valid tg or NULL.

* blk_throtl_bio() indicates return status both with its return value
  and in/out param **@bio.  The former is used to indicate whether
  queue is found to be dead during throtl processing.  The latter
  whether the bio is throttled.

  There's no point in returning DEAD check result from
  blk_throtl_bio().  The queue can die after blk_throtl_bio() is
  finished but before make_request_fn() grabs queue lock.

  Make it take *@bio instead and return boolean result indicating
  whether the request is throttled or not.

This patch doesn't cause any visible functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19 14:33:01 +02:00
Tejun Heo e3c78ca524 block: reorganize queue draining
Reorganize queue draining related code in preparation of queue exit
changes.

* Factor out actual draining from elv_quiesce_start() to
  blk_drain_queue().

* Make elv_quiesce_start/end() responsible for their own locking.

* Replace open-coded ELVSWITCH clearing in elevator_switch() with
  elv_quiesce_end().

This patch doesn't cause any visible functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19 14:32:38 +02:00
Tejun Heo 315fceee81 block: drop unnecessary blk_get/put_queue() in scsi_cmd_ioctl() and blk_get_tg()
blk_get/put_queue() in scsi_cmd_ioctl() and throtl_get_tg() are
completely bogus.  The caller must have a reference to the queue on
entry and taking an extra reference doesn't change anything.

For scsi_cmd_ioctl(), the only effect is that it ends up checking
QUEUE_FLAG_DEAD on entry; however, this is bogus as queue can die
right after blk_get_queue().  Dead queue should be and is handled in
request issue path (it's somewhat broken now but that's a separate
problem and doesn't affect this one much).

throtl_get_tg() incorrectly assumes that q is rcu freed.  Also, it
doesn't check return value of blk_get_queue().  If the queue is
already dead, it ends up doing an extra put.

Drop them.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19 14:31:25 +02:00
Tejun Heo 75eb6c372d block: pass around REQ_* flags instead of broken down booleans during request alloc/free
blk_alloc_request() and freed_request() take different combinations of
REQ_* @flags, @priv and @is_sync when @flags is superset of the latter
two.  Make them take @flags only.  This cleans up the code a bit and
will ease updating allocation related REQ_* flags.

This patch doesn't introduce any functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19 14:31:22 +02:00
Tejun Heo bc9fcbf9cb block: move blk_throtl prototypes to block/blk.h
blk_throtl interface is block internal and there's no reason to have
them in linux/blkdev.h.  Move them to block/blk.h.

This patch doesn't introduce any functional change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19 14:31:18 +02:00
Tejun Heo ece84241b9 block: fix genhd refcounting in blkio_policy_parse_and_set()
blkio_policy_parse_and_set() calls blkio_check_dev_num() to check
whether the given dev_t is valid.  blkio_check_dev_num() uses
get_gendisk() for verification but never puts the returned genhd
leaking the reference.

This patch collapses blkio_check_dev_num() into its caller and updates
it such that the genhd is put before returning.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19 14:31:15 +02:00
Tejun Heo 523e1d399c block: make gendisk hold a reference to its queue
The following command sequence triggers an oops.

# mount /dev/sdb1 /mnt
# echo 1 > /sys/class/scsi_device/0\:0\:1\:0/device/delete
# umount /mnt

 general protection fault: 0000 [#1] PREEMPT SMP
 CPU 2
 Modules linked in:

 Pid: 791, comm: umount Not tainted 3.1.0-rc3-work+ #8 Bochs Bochs
 RIP: 0010:[<ffffffff810d0879>]  [<ffffffff810d0879>] __lock_acquire+0x389/0x1d60
...
 Call Trace:
  [<ffffffff810d2845>] lock_acquire+0x95/0x140
  [<ffffffff81aed87b>] _raw_spin_lock+0x3b/0x50
  [<ffffffff811573bc>] bdi_lock_two+0x5c/0x70
  [<ffffffff811c2f6c>] bdev_inode_switch_bdi+0x4c/0xf0
  [<ffffffff811c3fcb>] __blkdev_put+0x11b/0x1d0
  [<ffffffff811c4010>] __blkdev_put+0x160/0x1d0
  [<ffffffff811c40df>] blkdev_put+0x5f/0x190
  [<ffffffff8118f18d>] kill_block_super+0x4d/0x80
  [<ffffffff8118f4a5>] deactivate_locked_super+0x45/0x70
  [<ffffffff8119003a>] deactivate_super+0x4a/0x70
  [<ffffffff811ac4ad>] mntput_no_expire+0xed/0x130
  [<ffffffff811acf2e>] sys_umount+0x7e/0x3a0
  [<ffffffff81aeeeab>] system_call_fastpath+0x16/0x1b

This is because bdev holds on to disk but disk doesn't pin the
associated queue.  If a SCSI device is removed while the device is
still open, the sdev puts the base reference to the queue on release.
When the bdev is finally released, the associated queue is already
gone along with the bdi and bdev_inode_switch_bdi() ends up
dereferencing already freed bdi.

Even if it were not for this bug, disk not holding onto the associated
queue is very unusual and error-prone.

Fix it by making add_disk() take an extra reference to its queue and
put it on disk_release() and ensuring that disk and its fops owner are
put in that order after all accesses to the disk and queue are
complete.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19 14:31:07 +02:00
Jens Axboe 5c04b426f2 Merge branch 'v3.1-rc10' into for-3.2/core
Conflicts:
	block/blk-core.c
	include/linux/blkdev.h

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19 14:30:42 +02:00
Hannes Reinecke 777eb1bf15 block: Free queue resources at blk_release_queue()
A kernel crash is observed when a mounted ext3/ext4 filesystem is
physically removed. The problem is that blk_cleanup_queue() frees up
some resources eg by calling elevator_exit(), which are not checked for
in normal operation. So we should rather move these calls to the
destructor function blk_release_queue() as at that point all remaining
references are gone. However, in doing so we have to ensure that any
externally supplied queue_lock is disconnected as the driver might free
up the lock after the call of blk_cleanup_queue(),

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-28 08:07:01 -06:00
Wanlong Gao d11bb4462c blk-cgroup: be able to remove the record of unplugged device
The bug is we're not able to remove the device from blkio cgroup's
per-device control files if it gets unplugged.

To reproduce the bug:

  # mount -t cgroup -o blkio xxx /cgroup
  # cd /cgroup
  # echo "8:0 1000" > blkio.throttle.read_bps_device
  # unplug the device
  # cat blkio.throttle.read_bps_device
  8:0	1000
  # echo "8:0 0" > blkio.throttle.read_bps_device
  -bash: echo: write error: No such device

After patching, the device removal will succeed.

Thanks for the comments of Paul, Zefan, and Vivek.

Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <paul@paulmenage.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-21 10:22:10 +02:00
Andrew Morton 499337bb65 block/blk-sysfs.c: fix kerneldoc references
The kerneldoc for blk_release_queue() is referring to blk_cleanup_queue().

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-21 10:01:22 +02:00
Suresh Jayaraman 75df713627 block: document blk-plug
Thus spake Andrew Morton:

"And I have the usual maintainability whine.  If someone comes up to
vmscan.c and sees it calling blk_start_plug(), how are they supposed to
work out why that call is there?  They go look at the blk_start_plug()
definition and it is undocumented.  I think we can do better than this?"

Adapted from the LWN article - http://lwn.net/Articles/438256/ by Jens
Axboe and from an earlier attempt by Shaohua Li to document blk-plug.

[akpm@linux-foundation.org: grammatical and spelling tweaks]
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-21 10:00:16 +02:00
Christoph Hellwig 27a84d54c0 block: refactor generic_make_request
Move all the checks performed on a bio into a new helper, and call it as
soon as bio is submitted even if it is a re-submission from ->make_request.

We explicitly mark the new helper as beeing non-inlined as the stack
usage for printing the block device name in the failure case is quite
high and this a patch where we have to be extremely conservative about
stack usage.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-15 14:01:40 +02:00
Tao Ma 8ad6a56f56 block: Don't check QUEUE_FLAG_SAME_COMP in __blk_complete_request
In __blk_complete_request, we check both QUEUE_FLAG_SAME_COMP and req->cpu
to decide whether we should use req->cpu. Actually the user can also
select the complete cpu by either setting BIO_CPU_AFFINE or by calling
bio_set_completion_cpu. Current solution makes these 2 ways don't work
any more. So we'd better just check req->cpu.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-14 09:31:01 +02:00
Christoph Hellwig 5a7bbad27a block: remove support for bio remapping from ->make_request
There is very little benefit in allowing to let a ->make_request
instance update the bios device and sector and loop around it in
__generic_make_request when we can archive the same through calling
generic_make_request from the driver and letting the loop in
generic_make_request handle it.

Note that various drivers got the return value from ->make_request and
returned non-zero values for errors.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-09-12 12:12:01 +02:00
Jens Axboe c20e8de27f block: rename __make_request() to blk_queue_bio()
Now that it's exported, lets put it in a more sane namespace.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-09-12 12:08:31 +02:00
Christoph Hellwig 166e1f901b block: export __make_request
Avoid the hacks need for request based device mappers currently by simply
exporting the symbol instead of trying to get it through the back door.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-09-12 12:08:27 +02:00
Wang Sheng-Hui 484fc254b8 elevator: use ELV_NAME_MAX instead of magic number 16 for chosen_elevator
We have ELV_NAME_MAX defined to 16, and hence we should use it
instead of the magic nubmer 16 for elevator's name string.

Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-09-12 08:59:20 +02:00
Nao Nishijima a72c5e5eb7 [SCSI] genhd: add a new attribute "alias" in gendisk
This patch allows the user to set an "alias" of the disk via sysfs interface.

This patch only adds a new attribute "alias" in gendisk structure.
To show the alias instead of the device name in kernel messages,
we need to revise printk messages and use alias_name() in them.

Example:
(current) printk("disk name is %s\n", disk->disk_name);
(new)     printk("disk name is %s\n", alias_name(disk));

Users can use alphabets, numbers, '-' and '_' in "alias" attribute. A disk can
have an "alias" which length is up to 255 bytes. This attribute is write-once.

Suggested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Suggested-by: Jon Masters <jcm@redhat.com>
Signed-off-by: Nao Nishijima <nao.nishijima.xt@hitachi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-29 00:16:19 -07:00
Shaohua Li 56ebdaf2fa block: simplify force plug flush code a little bit
Cleaning up the code a little bit. attempt_plug_merge() traverses the plug
list anyway, we can do the request counting there, so stack size is reduced
a little bit.
The motivation here is I suspect if we should count the requests for each
queue (task could handle multiple disks in the meantime), but my test doesn't
show it's worthy doing. If somebody proves we should do it, below change
will make that more easier.

Signed-off-by: Shaohua Li <shli@kernel.org>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-24 16:04:34 +02:00
Shaohua Li a632716275 block: change force plug flush call order
Do blk_flush_plug_list() first and then add new request aDo blk_flush_plug_list() first and then add new request aDo blk_flush_plug_list() first and then add new request at the tail. New
request can't be merged to existing requests, but later new requests might
be merged with this new one. If blk_flush_plug_list() is done later, the
merge doesn't happen.
Believe it or not, this fixes a 10% regression running sysbench workload.

Signed-off-by: Shaohua Li <shli@kernel.org>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-24 16:04:32 +02:00
Eric Seppanen e8037d4983 block: Fix queue_flag update when rq_affinity goes from 2 to 1
Commit 5757a6d76c added the QUEUE_FLAG_SAME_FORCE flag, but fails to
clear that flag when the current state is '2' (SAME_COMP + SAME_FORCE)
and the new state is '1' (SAME_COMP).

Acked-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Eric Seppanen <eric@purestorage.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-24 08:51:34 +02:00
Tejun Heo d27769ec3d block: add GENHD_FL_NO_PART_SCAN
There are cases where suppressing partition scan is useful - e.g. for
lo devices and pseudo SATA devices which advertise to be a disk but
get upset on partition scan (some port multiplier control devices show
such behavior).

This patch adds GENHD_FL_NO_PART_SCAN which suppresses partition scan
regardless of the number of possible partitions.  disk_partitionable()
is renamed to disk_part_scan_enabled() as suppressing partition scan
doesn't imply the device can't be partitioned using
BLKPG_ADD/DEL_PARTITION calls from userland.  show_partition() now
directly tests disk_max_parts() to maintain backward-compatibility.

-v2: Updated to make it clear that only partition scan is suppressed
     not partitioning itself as suggested by Kay Sievers.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-23 20:01:04 +02:00
Christoph Hellwig 65299a3b78 block: separate priority boosting from REQ_META
Add a new REQ_PRIO to let requests preempt others in the cfq I/O schedule,
and lave REQ_META purely for marking requests as metadata in blktrace.

All existing callers of REQ_META except for XFS are updated to also
set REQ_PRIO for now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-23 14:50:29 +02:00
Linus Torvalds 5ccc38740a Merge branch 'for-linus' of git://git.kernel.dk/linux-block
* 'for-linus' of git://git.kernel.dk/linux-block: (23 commits)
  Revert "cfq: Remove special treatment for metadata rqs."
  block: fix flush machinery for stacking drivers with differring flush flags
  block: improve rq_affinity placement
  blktrace: add FLUSH/FUA support
  Move some REQ flags to the common bio/request area
  allow blk_flush_policy to return REQ_FSEQ_DATA independent of *FLUSH
  xen/blkback: Make description more obvious.
  cfq-iosched: Add documentation about idling
  block: Make rq_affinity = 1 work as expected
  block: swim3: fix unterminated of_device_id table
  block/genhd.c: remove useless cast in diskstats_show()
  drivers/cdrom/cdrom.c: relax check on dvd manufacturer value
  drivers/block/drbd/drbd_nl.c: use bitmap_parse instead of __bitmap_parse
  bsg-lib: add module.h include
  cfq-iosched: Reduce linked group count upon group destruction
  blk-throttle: correctly determine sync bio
  loop: fix deadlock when sysfs and LOOP_CLR_FD race against each other
  loop: add BLK_DEV_LOOP_MIN_COUNT=%i to allow distros 0 pre-allocated loop devices
  loop: add management interface for on-demand device allocation
  loop: replace linked list of allocated devices with an idr index
  ...
2011-08-19 10:47:07 -07:00