Commit Graph

45 Commits

Author SHA1 Message Date
David Miller a672b4c1b2 i2c-algo-pcf: Fix typo in debugging log message
Fix typo in debugging log message.

deteted --> detected

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-22 20:21:30 +02:00
David Miller 30091404af i2c-algo-pcf: Add adapter hooks around xfer begin and end
Some I2C bus implementations need to synchronize with external
entities, such as system firmware, which might also be programming the
same I2C bus.

In order to facilitate this add ->xfer_begin() and ->xfer_end() hooks
which are invoked around pcf_xfer().

[JD: Make these hooks optional.]

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-22 20:21:30 +02:00
David Miller 08e5338d11 i2c-algo-pcf: Pass adapter data into ->waitforpin() method
Pass adapter data into ->waitforpin() method.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-22 20:21:29 +02:00
Jean Delvare 8d24f8dcb7 i2c: Let users select algorithm drivers manually again
In kernel 2.6.26, the ability to select I2C algorithm drivers manually
was removed, as all in-kernel drivers do that automatically. However
there were some complaints that it was a problem for out-of-tree I2C
bus drivers. In order to address these complaints, let's allow manual
selection of these drivers again, but still hide them by default for
better general user experience.

This closes bug #11140:
http://bugzilla.kernel.org/show_bug.cgi?id=11140

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-08-10 22:56:15 +02:00
Eric Brower 0573d11b2b i2c-algo-pcf: Multi-master lost-arbitration improvement
Improve lost-arbitration handling of PCF8584.  This is necessary for
support of a currently out-of-kernel driver for Sun Microsystems E250
environmental management; perhaps others.

Signed-off-by: Eric Brower <ebrower@gmail.com>
Acked-by: Dan Smolik <marvin@mydatex.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-14 22:38:31 +02:00
Wolfram Sang c80ebe7987 i2c-pca-algo: Fix error code
Give a more concrete error code, when the bus is not idle.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-14 22:38:26 +02:00
David Brownell 97140342e6 i2c: Bus drivers return -Errno not -1
Tighten error paths used by various i2c adapters (mostly x86) so
they return real fault/errno codes instead of a "-1" (which is
most often interpreted as "-EPERM").  Build tested, with eyeball
review.

One minor initial goal is to have adapters consistently return
the code "-ENXIO" when addressing a device doesn't get an ACK
response, at least in the probe paths where they are already
good at stifling related logspam.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-14 22:38:25 +02:00
Wolfram Sang c01b083105 i2c-algo-pca: Extend for future drivers
The separation between algorithm and adapter was unsharp at places. This was
partly hidden by the fact, that the ISA-driver allowed just one instance and
had all private data in static variables. This patch makes neccessary
preparations to add a platform driver on top of the algorithm, while still
supporting ISA. Note: Due to lack of hardware, the ISA-driver could not be
tested except that it builds.

Concerning the core struct i2c_algo_pca_data:

- A private data field was added, all hardware dependant data may go here.
  Similar to other algorithms, now a pointer to this data is passed to the
  adapter's functions. In order to make as less changes as possible to the
  ISA-driver, it leaves the private data empty and still only uses its static
  variables.

- A "reset_chip" function pointer was added; such a functionality must come
  from the adapter, not the algorithm.

- use a variable "i2c_clock" instead of a function pointer "get_clock",
  allowing for write access to a default in case a wrong value was supplied.

In the algorithm-file:

- move "i2c-pca-algo.h" into "linux/i2c-algo-pca.h"
- now using per_instance timeout values (i2c_adap->timeout)
- error messages specify the device, not only the driver name
- restructure initialization to easily support "i2c_add_numbered_adapter"
- drop "retries" and "own" (i2c address) as they were unused

(The state-machine for I2C-communication was not touched.)

In the ISA-driver:

- adapt to new algorithm

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:46 +02:00
Wolfram Sang 3d4382913f i2c-algo-pca: Remove trailing whitespaces and unnecessary UTF
Remove trailing whitespaces to make further patches more readable.  Also remove
an unnecessary UTF-char for simplicity ("us" for microseconds is fine enough).

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:46 +02:00
Jean Delvare 3845de25c5 i2c: Remove the algorithm drivers from the config menu
The algorithm drivers are helper drivers that are selected automatically
as needed. There's no point in listing them in the config menu, it can
only confuse users and waste their time.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:46 +02:00
Jean Delvare 6408a8338c i2c-algo-pcf: Delete broken 10-bit address support
The 10-bit address support in i2c-algo-pcf is so heavily broken that
it can't have ever been used. Nobody ever complained, so I'll take it
that nobody needs it. Let's just delete it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27 18:14:46 +01:00
David Brownell bf3e2d1d9b i2c-algo-bit: Fix NAK/ARB comments
Update comments and logging on return path for byte writes.  NAK is
an error, to be reported or optionally ignored.  Timeouts are always
errors.  Lost arbitration is not currently handled, so don't even list
it as an option in the error message.

Don't return bogus EFAULT code for inappropriate NAK; EIO is better,
there is no bad userspace address in question.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27 18:14:46 +01:00
David Brownell cf978ab284 i2c-algo-bit: Whitespace fixes (+ NAK/ARB comments)
Fix *LOTS* of whitespace goofs and checkpatch.pl warnings, strangely
parenthesized ternary expressions, and other CodingStyle glitches.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27 18:14:46 +01:00
Jan Engelhardt 96de0e252c Convert files to UTF-8 and some cleanups
* Convert files to UTF-8.

  * Also correct some people's names
    (one example is Eißfeldt, which was found in a source file.
    Given that the author used an ß at all in a source file
    indicates that the real name has in fact a 'ß' and not an 'ss',
    which is commonly used as a substitute for 'ß' when limited to
    7bit.)

  * Correct town names (Goettingen -> Göttingen)

  * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313)

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19 23:21:04 +02:00
David Brownell 939bc4943d i2c-algo-bit: Read block data bugfix
This fixes a bug in the way i2c-algo-bit handles I2C_M_RECV_LEN,
used to implement i2c_smbus_read_block_data().  Previously, in the
absence of PEC (rarely used!) it would NAK the "length" byte:

	S addr Rd [A] [length] NA

That prevents the subsequent data bytes from being read:

	S addr Rd [A] [length] { A [data] }* NA

The primary fix just reorders two code blocks, so the length used
in the "should I NAK now?" check incorporates the data which it
just read from the slave device.

However, that move also highlighted other fault handling glitches.
This fixes those by abstracting the RX path ack/nak logic, so it
can be used in more than one location.  Also, a few CodingStyle
issues were also resolved.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-09-09 22:29:14 +02:00
Jean Delvare 0a85e9a271 i2c-rpx: Remove
This driver has been broken forever. It depends on i2c-algo-8xx which
has never been in the mainline kernel.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12 14:12:32 +02:00
Jan Engelhardt 16538e6b32 Use menuconfig objects - I2C
Allow the whole I2C menu to be disabled at once without diving into
the submenus for deselecting all options (should the user desire so).

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:34 +02:00
Jean Delvare 494dbb64dc i2c-algo-bit: Improve debugging
Improve the debugging features of the i2c-algo-bit driver:
* Make it possible to compile the driver without debugging support
  at all, making it much smaller.
* Use dev_dbg() for debugging messages where possible, and dev_err()
  for error messages.
* Remove redundant debugging messages.

These changes allowed for minor code cleanups, which are included
as well.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:33 +02:00
Jean Delvare 424ed67c7d i2c-algo-bit: Implement a 50/50 SCL duty cycle
The original i2c-algo-bit implementation uses a 33/66 SCL duty cycle
when bits are being written on the bus. While the I2C specification
doesn't forbid it, this prevents us from driving the I2C bus to its
max speed, limiting us to 66 kbps max on standard I2C busses.

Implementing a 50/50 duty cycle instead lets us max out the bandwidth
up to the theoretical max of 100 kbps on standard I2C busses. This is
particularly important when large amounts of data need to be transfered
over the bus, as is the case with some TV adapters when the firmware is
being uploaded.

In fact this change even allows, at least in theory, fast-mode I2C
support at 125, 166 and 250 kbps. There's no way to reach the
theoretical max of 400 kbps with this implementation. But I don't
think we want to put efforts in that direction anyway: software-driven
I2C is very CPU-intensive and bad for latency.

Other timing changes:
* Don't set SDA high explicitly on error, we're going to issue a stop
  condition before we leave anyway.
* If an error occurs when sending the slave address, yield the CPU
  before retrying, and remove the additional delay after the new start
  condition.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:33 +02:00
Ladislav Michl 6edac5803f i2c-algo-sgi: Comment and whitespace cleanups
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:32 +02:00
Jean Delvare 0f3b483852 i2c-algo-bit: Add i2c_bit_add_numbered_bus
Add i2c_bit_add_numbered_bus(), which is equivalent to i2c_bit_add_bus
except that it calls i2c_add_numbered_adapter() at the end instead of
i2c_add_adapter().

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:31 +02:00
Jean Delvare 3c4bb241d3 i2c-algo-bit: Emulate SMBus block read
Now that i2c-core lets the i2c bus drivers emulate the SMBus block read
and SMBus block process call transaction types, let's implement that in
the popular i2c bit-banging driver. This will also act as a reference
implementation for other bus drivers which want to do the same.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:29 +02:00
Jean Delvare 1ecac07aba i2c-algo-bit: Always send a stop condition before leaving
The i2c-algo-bit driver doesn't behave well on read errors: it'll
bail out without even sending a stop condition on the bus, so the bus
will be stuck. So make sure that we always send a stop condition on
the bus before we leave. The best way to make sure is to always send
it at the end of function bit_xfer.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:28 +02:00
Jean Delvare 3269711b76 i2c: Discard the i2c algo del_bus wrappers
They are all only calling i2c_del_adapter, so we may as well do
it directly.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2006-12-10 21:21:33 +01:00
Jean Delvare 51fd554b65 i2c: Delete the broken i2c-ite bus driver
The rest of the ITE8172 support was already removed from MIPS tree.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
2006-12-10 21:21:29 +01:00
Jean Delvare 9e11a9fbfe i2c: Constify i2c_algorithm declarations, part 1
i2c: Constify i2c_algorithm declarations, part 1

Make struct i2c_algorithm declarations const in all i2c algorithm
drivers.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26 15:38:52 -07:00
Jean Delvare 7b288a018a i2c-algo-bit: Cleanups
i2c-algo-bit: Cleanups

* Uninline long functions (saves around 1 kB or 15%)
* Refactor code in sclhi()
* Drop redundant udelay on repeated start

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26 15:38:51 -07:00
Jean Delvare a0d9c63d36 i2c-algo-bit: Discard the mdelay data struct member
i2c-algo-bit: Discard the mdelay data struct member

The i2c_algo_bit_data structure has an mdelay member, which is not
used by the algorithm code (the code has always been ifdef'd out.)
Let's discard it to save some code and memory.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26 15:38:51 -07:00
Jean Delvare 51c3711704 i2c-algo-sibyte: Merge into i2c-sibyte
i2c-algo-sibyte: Merge into i2c-sibyte

Merge i2c-algo-sibyte into i2c-sibyte, as this is a complete,
hardware-dependent SMBus implementation and not a reusable algorithm.

Perform some basic coding style cleanups while we're here (mainly
space-based indentation replaced by tabulations.)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26 15:38:50 -07:00
Jean Delvare 3fd3968754 i2c-algo-sibyte: Cleanups
i2c-algo-sibyte: Cleanups

* Delete empty algo_control implementation.
* Simplify i2c_sibyte_del_bus.
* Delete empty module init and cleanup functions.
* Drop out-of-date #ifdef MODULE construct.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26 15:38:50 -07:00
Uwe Bugla 5313775f18 [PATCH] i2c-algo-bit: Wipe out dead code
i2c-algo-bit: Wipe out dead code

Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12 15:43:07 -07:00
Mark M. Hoffman b39ad0cf7c [PATCH] i2c: Handle i2c_add_adapter failure in i2c algorithm drivers
Content-Disposition: inline; filename=i2c-algo-error-handling-fix.patch

It is possible for i2c_add_adapter() to fail.  Several I2C algorithm
drivers ignore that fact.  This (compile-tested only) patch fixes them.

Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12 15:43:07 -07:00
Eric Sesterhenn 8104a9a9c9 [PATCH] i2c: Use module_param in i2c-algo-sibyte
this patch changes MODULE_PARM usage
to module_param in i2c-algo-sibyte.c

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-06 12:02:15 -08:00
Jean Delvare 605070952f [PATCH] i2c: Discard explicit static initializations to 0
Kill explicit static initializations to 0 in 10 i2c drivers.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/i2c/algos/i2c-algo-pca.c    |    2 +-
 drivers/i2c/algos/i2c-algo-sibyte.c |    2 +-
 drivers/i2c/busses/i2c-ali15x3.c    |    4 ++--
 drivers/i2c/busses/i2c-amd756.c     |    2 +-
 drivers/i2c/busses/i2c-iop3xx.c     |    2 +-
 drivers/i2c/busses/i2c-piix4.c      |    8 ++++----
 drivers/i2c/busses/i2c-sis5595.c    |    4 ++--
 drivers/i2c/busses/i2c-sis630.c     |    2 +-
 drivers/i2c/busses/i2c-sis96x.c     |    2 +-
 drivers/i2c/busses/i2c-via.c        |    2 +-
 10 files changed, 15 insertions(+), 15 deletions(-)
2005-10-28 14:02:06 -07:00
Jean Delvare a89923fff7 [PATCH] I2C: Fix sgi_xfer return value
The sgi_xfer function returns 0 on success instead of the number of
transfered messages as it is supposed to. This patch fixes that.

Let's just hope that no client chip driver was relying on this
misbehavior.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05 09:26:54 -07:00
Jean Delvare c7a46533ff [PATCH] I2C: Kill i2c_algorithm.id (5/7)
Merge the algorithm id part (16 upper bits) of the i2c adapters ids
into the definition of the adapters ids directly. After that, we don't
need to OR both ids together for each i2c_adapter structure.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05 09:14:31 -07:00
Jean Delvare 1d8b9e1bad [PATCH] I2C: Kill i2c_algorithm.id (4/7)
There are no more users of i2c_algorithm.id, so we can finally drop
this structure member.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05 09:14:29 -07:00
Jean Delvare 87c3d7a8bc [PATCH] I2C: Kill i2c_algorithm.id (3/7)
Don't rely on i2c_algorithm.id to alter the i2c adapter's id, use the
I2C_ALGO_* value directly instead, because i2c_algorithm will soon
have no id member no more.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05 09:14:29 -07:00
Jean Delvare 975185880d [PATCH] I2C: Kill i2c_algorithm.name (1/7)
The name member of the i2c_algorithm is never used, although all
drivers conscientiously fill it. We can drop it completely, this
structure doesn't need to have a name.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05 09:14:27 -07:00
Ian Campbell 48edcb65dd [PATCH] I2C: i2c-algo-pca -- gracefully handle a busy bus
I've been running with this patch for a while now, and while I've never
seen it trigger except with buggy hardware I think it is a cleaner way
to handle a busy bus. I had -EBUSY until about 10 minutes ago but -EIO
seems to be what most of the existing algo drivers will return in the
same circumstances.

Signed-off-by: Ian Campbell <icampbell@arcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05 09:14:15 -07:00
Jean Delvare 541e6a0276 [PATCH] I2C: Strip trailing whitespace from strings
Here is a simple patch originally from Denis Vlasenko, which strips a
useless trailing whitespace from 8 strings in 4 i2c drivers. Please
apply, thanks.

From: Denis Vlasenko <vda@ilport.com.ua>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-11 14:10:36 -07:00
Tobias Klauser 46b615f453 [PATCH] I2C: Spelling fixes for drivers/i2c/algos/i2c-algo-pca.c
This patch fixes the some misspellings and a trailing whitespace in
the comments.

Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-21 21:51:59 -07:00
Steven Cole 44bbe87e90 [PATCH] Spelling fixes for drivers/i2c.
Here are some spelling corrections for drivers/i2c.

 occured -> occurred
 intialization -> initialization
 Everytime -> Every time
 transfering -> transferring
 relevent -> relevant
 continous -> continuous
 neccessary -> necessary
 explicitely -> explicitly
 Celcius -> Celsius
 differenciate -> differentiate

Signed-off-by: Steven Cole <elenstev@mesatop.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-21 21:51:55 -07:00
Alexey Dobriyan f0bb60e7b1 [PATCH] I2C: drivers/i2c/*: #include <linux/config.h> cleanup
Files that don't use CONFIG_* stuff shouldn't include config.h
Files that use CONFIG_* stuff should include config.h

It's that simple. ;-)

Signed-off-by: Alexey Dobriyan <adobriyan@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-21 21:51:53 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00