Commit Graph

879 Commits

Author SHA1 Message Date
David Ward 244b65dbfe net_sched: gred: Fix oops in gred_dump() in WRED mode
A parameter set exists for WRED mode, called wred_set, to hold the same
values for qavg and qidlestart across all VQs. The WRED mode values had
been previously held in the VQ for the default DP. After these values
were moved to wred_set, the VQ for the default DP was no longer created
automatically (so that it could be omitted on purpose, to have packets
in the default DP enqueued directly to the device without using RED).

However, gred_dump() was overlooked during that change; in WRED mode it
still reads qavg/qidlestart from the VQ for the default DP, which might
not even exist. As a result, this command sequence will cause an oops:

tc qdisc add dev $DEV handle $HANDLE parent $PARENT gred setup \
    DPs 3 default 2 grio
tc qdisc change dev $DEV handle $HANDLE gred DP 0 prio 8 $RED_OPTIONS
tc qdisc change dev $DEV handle $HANDLE gred DP 1 prio 8 $RED_OPTIONS

This fixes gred_dump() in WRED mode to use the values held in wred_set.

Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-16 23:51:07 -04:00
Linus Torvalds 3b59bf0816 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking merge from David Miller:
 "1) Move ixgbe driver over to purely page based buffering on receive.
     From Alexander Duyck.

  2) Add receive packet steering support to e1000e, from Bruce Allan.

  3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

  4) Reduce cpu usage in handling out-of-order TCP packets on modern
     systems, also from Eric Dumazet.

  5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
     folks happy, from Erich Hoover.

  6) Support VLAN trunking from guests in hyperv driver, from Haiyang
     Zhang.

  7) Support byte-queue-limtis in r8169, from Igor Maravic.

  8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
     was never properly implemented, Jiri Benc fixed that.

  9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

  10) Support kernel side dump filtering by ctmark in netfilter
      ctnetlink, from Pablo Neira Ayuso.

  11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

  12) Add new peek socket options to assist with socket migration, from
      Pavel Emelyanov.

  13) Add sch_plug packet scheduler whose queue is controlled by
      userland daemons using explicit freeze and release commands.  From
      Shriram Rajagopalan.

  14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
  Fix pppol2tp getsockname()
  Remove printk from rds_sendmsg
  ipv6: fix incorrent ipv6 ipsec packet fragment
  cpsw: Hook up default ndo_change_mtu.
  net: qmi_wwan: fix build error due to cdc-wdm dependecy
  netdev: driver: ethernet: Add TI CPSW driver
  netdev: driver: ethernet: add cpsw address lookup engine support
  phy: add am79c874 PHY support
  mlx4_core: fix race on comm channel
  bonding: send igmp report for its master
  fs_enet: Add MPC5125 FEC support and PHY interface selection
  net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
  net: update the usage of CHECKSUM_UNNECESSARY
  fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
  net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
  ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
  net/hyperv: Fix the code handling tx busy
  ixgbe: fix namespace issues when FCoE/DCB is not enabled
  rtlwifi: Remove unused ETH_ADDR_LEN defines
  igbvf: Use ETH_ALEN
  ...

Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.
2012-03-20 21:04:47 -07:00
Linus Torvalds 0d9cabdcce Merge branch 'for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup changes from Tejun Heo:
 "Out of the 8 commits, one fixes a long-standing locking issue around
  tasklist walking and others are cleanups."

* 'for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Walk task list under tasklist_lock in cgroup_enable_task_cg_list
  cgroup: Remove wrong comment on cgroup_enable_task_cg_list()
  cgroup: remove cgroup_subsys argument from callbacks
  cgroup: remove extra calls to find_existing_css_set
  cgroup: replace tasklist_lock with rcu_read_lock
  cgroup: simplify double-check locking in cgroup_attach_proc
  cgroup: move struct cgroup_pidlist out from the header file
  cgroup: remove cgroup_attach_task_current_cg()
2012-03-20 18:11:21 -07:00
David S. Miller 4da0bd7365 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2012-03-18 23:29:41 -04:00
Eric Dumazet cc34eb672e sch_sfq: revert dont put new flow at the end of flows
This reverts commit d47a0ac7b6 (sch_sfq: dont put new flow at the end of
flows)

As Jesper found out, patch sounded great but has bad side effects.

In stress situation, pushing new flows in front of the queue can prevent
old flows doing any progress. Packets can stay in SFQ queue for
unlimited amount of time.

It's possible to add heuristics to limit this problem, but this would
add complexity outside of SFQ scope.

A more sensible answer to Dave Taht concerns (who reported the issued I
tried to solve in original commit) is probably to use a qdisc hierarchy
so that high prio packets dont enter a potentially crowded SFQ qdisc.

Reported-by: Jesper Dangaard Brouer <jdb@comx.dk>
Cc: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-16 01:55:25 -07:00
David S. Miller ff4783ce78 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/sfc/rx.c

Overlapping changes in drivers/net/ethernet/sfc/rx.c, one to change
the rx_buf->is_page boolean into a set of u16 flags, and another to
adjust how ->ip_summed is initialized.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-26 21:55:51 -05:00
Eric Dumazet cd961c2ca9 netem: fix dequeue
commit 50612537e9 (netem: fix classful handling) added two errors in
netem_dequeue()

1) After checking skb at the head of tfifo queue for time constraints,
   it dequeues tail skb, thus adding unwanted reordering.

2) qdisc stats are updated twice per packet
   (one when packet dequeued from tfifo, once when delivered)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-19 18:57:50 -05:00
Eric Dumazet 2132cf6437 net_sched: sch_plug: plug_qdisc_ops is static
net/sched/sch_plug.c:211:18: warning: symbol 'plug_qdisc_ops' was not
declared. Should it be static?

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13 16:04:40 -05:00
David S. Miller 16bda13d90 net: Make qdisc_skb_cb upper size bound explicit.
Just like skb->cb[], so that qdisc_skb_cb can be encapsulated inside
of other data structures.

This is intended to be used by IPoIB so that it can remember
addressing information stored at hard_header_ops->create() time that
it can fetch when the packet gets to the transmit routine.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-09 13:50:34 -05:00
Shriram Rajagopalan c3059be16c net/sched: sch_plug - Queue traffic until an explicit release command
The qdisc supports two operations - plug and unplug. When the
qdisc receives a plug command via netlink request, packets arriving
henceforth are buffered until a corresponding unplug command is received.
Depending on the type of unplug command, the queue can be unplugged
indefinitely or selectively.

This qdisc can be used to implement output buffering, an essential
functionality required for consistent recovery in checkpoint based
fault-tolerance systems. Output buffering enables speculative execution
by allowing generated network traffic to be rolled back. It is used to
provide network protection for Xen Guests in the Remus high availability
project, available as part of Xen.

This module is generic enough to be used by any other system that wishes
to add speculative execution and output buffering to its applications.

This module was originally available in the linux 2.6.32 PV-OPS tree,
used as dom0 for Xen.

For more information, please refer to http://nss.cs.ubc.ca/remus/
and http://wiki.xensource.com/xenwiki/Remus

Changes in V3:
  * Removed debug output (printk) on queue overflow
  * Added TCQ_PLUG_RELEASE_INDEFINITE - that allows the user to
    use this qdisc, for simple plug/unplug operations.
  * Use of packet counts instead of pointers to keep track of
    the buffers in the queue.

Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Signed-off-by: Brendan Cully <brendan@cs.ubc.ca>
[author of the code in the linux 2.6.32 pvops tree]
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-07 12:54:56 -05:00
David S. Miller a0417fa3a1 net: Make qdisc_skb_cb upper size bound explicit.
Just like skb->cb[], so that qdisc_skb_cb can be encapsulated inside
of other data structures.

This is intended to be used by IPoIB so that it can remember
addressing information stored at hard_header_ops->create() time that
it can fetch when the packet gets to the transmit routine.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-06 15:14:37 -05:00
Li Zefan 761b3ef50e cgroup: remove cgroup_subsys argument from callbacks
The argument is not used at all, and it's not necessary, because
a specific callback handler of course knows which subsys it
belongs to.

Now only ->pupulate() takes this argument, because the handlers of
this callback always call cgroup_add_file()/cgroup_add_files().

So we reduce a few lines of code, though the shrinking of object size
is minimal.

 16 files changed, 113 insertions(+), 162 deletions(-)

   text    data     bss     dec     hex filename
5486240  656987 7039960 13183187         c928d3 vmlinux.o.orig
5486170  656987 7039960 13183117         c9288d vmlinux.o

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2012-02-02 09:20:22 -08:00
Vijay Subramanian a42b4799c6 netem: Fix off-by-one bug in reordering
With netem reordering, a gap of N is supposed to reorder every Nth packet with
given reorder probability.  However, the code currently skips N packets and
reorders every (N+1)th packet.

Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22 15:08:44 -05:00
Eric Dumazet ddecf0f4db net_sched: sfq: add optional RED on top of SFQ
Adds an optional Random Early Detection on each SFQ flow queue.

Traditional SFQ limits count of packets, while RED permits to also
control number of bytes per flow, and adds ECN capability as well.

1) We dont handle the idle time management in this RED implementation,
since each 'new flow' begins with a null qavg. We really want to address
backlogged flows.

2) if headdrop is selected, we try to ecn mark first packet instead of
currently enqueued packet. This gives faster feedback for tcp flows
compared to traditional RED [ marking the last packet in queue ]

Example of use :

tc qdisc add dev $DEV parent 1:1 handle 10: est 1sec 4sec sfq \
	limit 3000 headdrop flows 512 divisor 16384 \
	redflowlimit 100000 min 8000 max 60000 probability 0.20 ecn

qdisc sfq 10: parent 1:1 limit 3000p quantum 1514b depth 127 headdrop
flows 512/16384 divisor 16384
 ewma 6 min 8000b max 60000b probability 0.2 ecn
 prob_mark 0 prob_mark_head 4876 prob_drop 6131
 forced_mark 0 forced_mark_head 0 forced_drop 0
 Sent 1175211782 bytes 777537 pkt (dropped 6131, overlimits 11007
requeues 0)
 rate 99483Kbit 8219pps backlog 689392b 456p requeues 0

In this test, with 64 netperf TCP_STREAM sessions, 50% using ECN enabled
flows, we can see number of packets CE marked is smaller than number of
drops (for non ECN flows)

If same test is run, without RED, we can check backlog is much bigger.

qdisc sfq 10: parent 1:1 limit 3000p quantum 1514b depth 127 headdrop
flows 512/16384 divisor 16384
 Sent 1148683617 bytes 795006 pkt (dropped 0, overlimits 0 requeues 0)
 rate 98429Kbit 8521pps backlog 1221290b 841p requeues 0

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
CC: Dave Taht <dave.taht@gmail.com>
Tested-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-12 20:05:28 -08:00
Eric Dumazet eeca6688d6 net_sched: red: split red_parms into parms and vars
This patch splits the red_parms structure into two components.

One holding the RED 'constant' parameters, and one containing the
variables.

This permits a size reduction of GRED qdisc, and is a preliminary step
to add an optional RED unit to SFQ.

SFQRED will have a single red_parms structure shared by all flows, and a
private red_vars per flow.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Dave Taht <dave.taht@gmail.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05 14:01:21 -05:00
Eric Dumazet 18cb809850 net_sched: sfq: extend limits
SFQ as implemented in Linux is very limited, with at most 127 flows
and limit of 127 packets. [ So if 127 flows are active, we have one
packet per flow ]

This patch brings to SFQ following features to cope with modern needs.

- Ability to specify a smaller per flow limit of inflight packets.
    (default value being at 127 packets)

- Ability to have up to 65408 active flows (instead of 127)

- Ability to have head drops instead of tail drops
  (to drop old packets from a flow)

Example of use : No more than 20 packets per flow, max 8000 flows, max
20000 packets in SFQ qdisc, hash table of 65536 slots.

tc qdisc add ... sfq \
        flows 8000 \
        depth 20 \
        headdrop \
        limit 20000 \
	divisor 65536

Ram usage :

2 bytes per hash table entry (instead of previous 1 byte/entry)
32 bytes per flow on 64bit arches, instead of 384 for QFQ, so much
better cache hit ratio.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Dave Taht <dave.taht@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05 14:01:21 -05:00
Hagen Paul Pfeifer eb10192447 net_sched: Bug in netem reordering
Not now, but it looks you are correct. q->qdisc is NULL until another
additional qdisc is attached (beside tfifo). See 50612537e9.
The following patch should work.

From: Hagen Paul Pfeifer <hagen@jauu.net>

netem: catch NULL pointer by updating the real qdisc statistic

Reported-by: Vijay Subramanian <subramanian.vijay@gmail.com>
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05 13:27:39 -05:00
David S. Miller 117ff42fd4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2012-01-04 21:35:43 -05:00
Eric Dumazet 02a9098ede net_sched: sfq: always randomize hash perturbation
SFQ q->perturbation is used in sfq_hash() as an input to Jenkins hash.

We currently randomize this 32bit value only if a perturbation timer is
setup.

Its much better to always initialize it to defeat attackers, or else
they can predict very well what kind of packets they have to forge to
hit a particular flow.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04 14:12:48 -05:00
Eric Dumazet bd16a6cce2 net_sched: sfq: fix mem alloc error recovery
Since commit 817fb15dfd (net_sched: sfq: allow divisor to be a
parameter), we can leave perturbation timer armed if a memory allocation
error aborts sfq_init().

Memory containing active struct timer_list is freed and kernel can
crash.

Call sfq_destroy() from sfq_init() to properly dismantle qdisc.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04 14:12:48 -05:00
Eric Dumazet fa0f5aa743 net_sched: qdisc_alloc_handle() can be too slow
When trying to allocate ~32768 qdiscs using autohandle mechanism, we can
fill the space managed by kernel (handles in [8000-FFFF]:0000 range)

But O(N^2) qdisc_alloc_handle() loops 0x10000 times instead of 0x8000

time tc add qdisc add dev eth0 parent 10:7fff pfifo limit 10
RTNETLINK answers: Cannot allocate memory
real    1m54.826s
user    0m0.000s
sys     0m0.004s

INFO: rcu_sched_state detected stall on CPU 0 (t=60000 jiffies)

Half number of loops, and add a cond_resched() call.
We hold rtnl at this point.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Dave Taht <dave.taht@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-03 13:03:20 -05:00
Eric Dumazet d32ae76f2b sch_qfq: accurate wsum handling
We can underestimate q->wsum in case of "tc class replace ... qfq"
and/or qdisc_create_dflt() error.

wsum is not really used in fast path, only at qfq qdisc/class setup,
to catch user error.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-03 13:02:19 -05:00
Eric Dumazet 6bafcac323 sch_qfq: fix overflow in qfq_update_start()
grp->slot_shift is between 22 and 41, so using 32bit wide variables is
probably a typo.

This could explain QFQ hangs Dave reported to me, after 2^23 packets ?

(23 = 64 - 41)

Reported-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
CC: Dave Taht <dave.taht@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-03 12:58:23 -05:00
Eric Dumazet d47a0ac7b6 sch_sfq: dont put new flow at the end of flows
SFQ enqueue algo puts a new flow _behind_ all pre-existing flows in the
circular list. In fact this is probably an old SFQ implementation bug.

100 Mbits = ~8333 full frames per second, or ~8 frames per ms.

With 50 flows, it means your "new flow" will have to wait 50 packets
being sent before its own packet. Thats the ~6ms.

We certainly can change SFQ to give a priority advantage to new flows,
so that next dequeued packet is taken from a new flow, not an old one.

Reported-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-03 12:52:09 -05:00
Eric Dumazet 50612537e9 netem: fix classful handling
Commit 10f6dfcfde (Revert "sch_netem: Remove classful functionality")
reintroduced classful functionality to netem, but broke basic netem
behavior :

netem uses an t(ime)fifo queue, and store timestamps in skb->cb[]

If qdisc is changed, time constraints are not respected and other qdisc
can destroy skb->cb[] and block netem at dequeue time.

Fix this by always using internal tfifo, and optionally attach a child
qdisc to netem (or a tree of qdiscs)

Example of use :

DEV=eth3
tc qdisc del dev $DEV root
tc qdisc add dev $DEV root handle 30: est 1sec 8sec netem delay 20ms 10ms
tc qdisc add dev $DEV handle 40:0 parent 30:0 tbf \
	burst 20480 limit 20480 mtu 1514 rate 32000bps

qdisc netem 30: root refcnt 18 limit 1000 delay 20.0ms  10.0ms
 Sent 190792 bytes 413 pkt (dropped 0, overlimits 0 requeues 0)
 rate 18416bit 3pps backlog 0b 0p requeues 0
qdisc tbf 40: parent 30: rate 256000bit burst 20Kb/8 mpu 0b lat 0us
 Sent 190792 bytes 413 pkt (dropped 6, overlimits 10 requeues 0)
 backlog 0b 5p requeues 0

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-30 17:12:23 -05:00
David S. Miller 7f8e3234c5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2011-12-30 13:04:14 -05:00
Eric Dumazet b0460e4484 sch_tbf: report backlog information
Provide child qdisc backlog (byte count) information so that "tc -s
qdisc" can report it to user.

qdisc netem 30: root refcnt 18 limit 1000 delay 20.0ms  10.0ms
 Sent 948517 bytes 898 pkt (dropped 0, overlimits 0 requeues 1)
 rate 175056bit 16pps backlog 114b 1p requeues 1
qdisc tbf 40: parent 30: rate 256000bit burst 20Kb/8 mpu 0b lat 0us
 Sent 948517 bytes 898 pkt (dropped 15, overlimits 611 requeues 0)
 backlog 18168b 12p requeues 0

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-29 15:07:21 -05:00
Eric Dumazet bb52c7acf8 netem: dont call vfree() under spinlock and BH disabled
commit 6373a9a286 (netem: use vmalloc for distribution table) added a
regression, since vfree() is called while holding a spinlock and BH
being disabled.

Fix this by doing the pointers swap in critical section, and freeing
after spinlock release.

Also add __GFP_NOWARN to the kmalloc() try, since we fallback to
vmalloc().

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-24 16:08:50 -05:00
David S. Miller abb434cb05 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	net/bluetooth/l2cap_core.c

Just two overlapping changes, one added an initialization of
a local variable, and another change added a new local variable.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-23 17:13:56 -05:00
stephen hemminger 2494654d48 netem: loss model API sizes
The new netem loss model is configured with nested netlink messages.
This code is being overly strict about sizes, and is easily confused
by padding (or possible future expansion). Also message
for gemodel is incorrect.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-23 16:51:18 -05:00
Eric Dumazet f5a59b7332 sch_hfsc: report backlog information
Add backlog (byte count) information in hfsc classes and qdisc, so that
"tc -s" can report it to user, instead of 0 values :

qdisc hfsc 1: root refcnt 6 default 20
 Sent 45141660 bytes 30545 pkt (dropped 0, overlimits 91751 requeues 0)
 rate 1492Kbit 126pps backlog 103226b 74p requeues 0
...
class hfsc 1:20 parent 1:1 leaf 1201: rt m1 0bit d 0us m2 400000bit ls m1 0bit d 0us m2 200000bit
 Sent 49534912 bytes 33519 pkt (dropped 0, overlimits 0 requeues 0)
 backlog 81822b 56p requeues 0
 period 23 work 49451576 bytes rtwork 13277552 bytes level 0
...

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: John A. Sullivan III <jsullivan@opensourcedevel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-23 16:51:18 -05:00
Thomas Graf 7838f2ce36 mqprio: Avoid panic if no options are provided
Userspace may not provide TCA_OPTIONS, in fact tc currently does
so not do so if no arguments are specified on the command line.
Return EINVAL instead of panicing.

Signed-off-by: Thomas Graf <tgraf@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-22 22:34:56 -05:00
Eric Dumazet 225d9b89c9 sch_sfq: rehash queues in perturb timer
A known Out Of Order (OOO) problem hurts SFQ when timer changes
perturbation value, since all new packets delivered to SFQ enqueue might
end on different slots than previous in-flight packets.

With round robin delivery, we can thus deliver packets in a different
order.

Since SFQ is limited to small amount of in-flight packets, we can rehash
packets so that this OOO problem is fixed.

This rehashing is performed only if internal flow classifier is in use.

We now store in skb->cb[] the "struct flow_keys" so that we dont call
skb_flow_dissect() again while rehashing.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-21 15:44:34 -05:00
Eric Dumazet 869aa41044 sch_gred: prefer GFP_KERNEL allocations
In control path, its better to use GFP_KERNEL allocations where
possible.

Before taking qdisc spinlock, we preallocate memory just in case we'll
need it in gred_change_vq()

This is a followup to commit 3f1e6d3fd3 (sch_gred: should not use
GFP_KERNEL while holding a spinlock)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16 15:40:33 -05:00
David S. Miller b26e478f8f Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/freescale/fsl_pq_mdio.c
	net/batman-adv/translation-table.c
	net/ipv6/route.c
2011-12-16 02:11:14 -05:00
Eric Dumazet 3a53943b5a cls_flow: remove one dynamic array
Its better to use a predefined size for this small automatic variable.

Removes a sparse error as well :

net/sched/cls_flow.c:288:13: error: bad constant expression

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-14 13:34:55 -05:00
Hagen Paul Pfeifer 90b41a1cd4 netem: add cell concept to simulate special MAC behavior
This extension can be used to simulate special link layer
characteristics. Simulate because packet data is not modified, only the
calculation base is changed to delay a packet based on the original
packet size and artificial cell information.

packet_overhead can be used to simulate a link layer header compression
scheme (e.g. set packet_overhead to -20) or with a positive
packet_overhead value an additional MAC header can be simulated. It is
also possible to "replace" the 14 byte Ethernet header with something
else.

cell_size and cell_overhead can be used to simulate link layer schemes,
based on cells, like some TDMA schemes. Another application area are MAC
schemes using a link layer fragmentation with a (small) header each.
Cell size is the maximum amount of data bytes within one cell. Cell
overhead is an additional variable to change the per-cell-overhead
(e.g.  5 byte header per fragment).

Example (5 kbit/s, 20 byte per packet overhead, cell-size 100 byte, per
cell overhead 5 byte):

  tc qdisc add dev eth0 root netem rate 5kbit 20 100 5

Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-12 19:44:48 -05:00
Eric Dumazet 3f1e6d3fd3 sch_gred: should not use GFP_KERNEL while holding a spinlock
gred_change_vq() is called under sch_tree_lock(sch).

This means a spinlock is held, and we are not allowed to sleep in this
context.

We might pre-allocate memory using GFP_KERNEL before taking spinlock,
but this is not suitable for stable material.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-12 19:08:54 -05:00
Eric Dumazet a73ed26bba sch_red: generalize accurate MAX_P support to RED/GRED/CHOKE
Now RED uses a Q0.32 number to store max_p (max probability), allow
RED/GRED/CHOKE to use/report full resolution at config/dump time.

Old tc binaries are non aware of new attributes, and still set/get Plog.

New tc binary set/get both Plog and max_p for backward compatibility,
they display "probability value" if they get max_p from new kernels.

# tc -d  qdisc show dev ...
...
qdisc red 10: parent 1:1 limit 360Kb min 30Kb max 90Kb ecn ewma 5
probability 0.09 Scell_log 15

Make sure we avoid potential divides by 0 in reciprocal_value(), if
(max_th - min_th) is big.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-09 13:46:15 -05:00
Eric Dumazet 8af2a218de sch_red: Adaptative RED AQM
Adaptative RED AQM for linux, based on paper from Sally FLoyd,
Ramakrishna Gummadi, and Scott Shenker, August 2001 :

http://icir.org/floyd/papers/adaptiveRed.pdf

Goal of Adaptative RED is to make max_p a dynamic value between 1% and
50% to reach the target average queue : (max_th - min_th) / 2

Every 500 ms:
 if (avg > target and max_p <= 0.5)
  increase max_p : max_p += alpha;
 else if (avg < target and max_p >= 0.01)
  decrease max_p : max_p *= beta;

target :[min_th + 0.4*(min_th - max_th),
          min_th + 0.6*(min_th - max_th)].
alpha : min(0.01, max_p / 4)
beta : 0.9
max_P is a Q0.32 fixed point number (unsigned, with 32 bits mantissa)

Changes against our RED implementation are :

max_p is no longer a negative power of two (1/(2^Plog)), but a Q0.32
fixed point number, to allow full range described in Adatative paper.

To deliver a random number, we now use a reciprocal divide (thats really
a multiply), but this operation is done once per marked/droped packet
when in RED_BETWEEN_TRESH window, so added cost (compared to previous
AND operation) is near zero.

dump operation gives current max_p value in a new TCA_RED_MAX_P
attribute.

Example on a 10Mbit link :

tc qdisc add dev $DEV parent 1:1 handle 10: est 1sec 8sec red \
   limit 400000 min 30000 max 90000 avpkt 1000 \
   burst 55 ecn adaptative bandwidth 10Mbit

# tc -s -d qdisc show dev eth3
...
qdisc red 10: parent 1:1 limit 400000b min 30000b max 90000b ecn
adaptative ewma 5 max_p=0.113335 Scell_log 15
 Sent 50414282 bytes 34504 pkt (dropped 35, overlimits 1392 requeues 0)
 rate 9749Kbit 831pps backlog 72056b 16p requeues 0
  marked 1357 early 35 pdrop 0 other 0

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-08 19:52:43 -05:00
David Miller 2721745501 net: Rename dst_get_neighbour{, _raw} to dst_get_neighbour_noref{, _raw}.
To reflect the fact that a refrence is not obtained to the
resulting neighbour entry.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Roland Dreier <roland@purestorage.com>
2011-12-05 15:20:19 -05:00
David S. Miller b3613118eb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2011-12-02 13:49:21 -05:00
Eric Dumazet 1ee5fa1e99 sch_red: fix red_change
Le mercredi 30 novembre 2011 à 14:36 -0800, Stephen Hemminger a écrit :

> (Almost) nobody uses RED because they can't figure it out.
> According to Wikipedia, VJ says that:
>  "there are not one, but two bugs in classic RED."

RED is useful for high throughput routers, I doubt many linux machines
act as such devices.

I was considering adding Adaptative RED (Sally Floyd, Ramakrishna
Gummadi, Scott Shender), August 2001

In this version, maxp is dynamic (from 1% to 50%), and user only have to
setup min_th (target average queue size)
(max_th and wq (burst in linux RED) are automatically setup)

By the way it seems we have a small bug in red_change()

if (skb_queue_empty(&sch->q))
	red_end_of_idle_period(&q->parms);

First, if queue is empty, we should call
red_start_of_idle_period(&q->parms);

Second, since we dont use anymore sch->q, but q->qdisc, the test is
meaningless.

Oh well...

[PATCH] sch_red: fix red_change()

Now RED is classful, we must check q->qdisc->q.qlen, and if queue is empty,
we start an idle period, not end it.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01 19:24:38 -05:00
Eric Dumazet fc33cc7242 netem: fix build error on 32bit arches
ERROR: "__udivdi3" [net/sched/sch_netem.ko] undefined!

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01 11:40:19 -05:00
Hagen Paul Pfeifer 7bc0f28c7a netem: rate extension
Currently netem is not in the ability to emulate channel bandwidth. Only static
delay (and optional random jitter) can be configured.

To emulate the channel rate the token bucket filter (sch_tbf) can be used.  But
TBF has some major emulation flaws. The buffer (token bucket depth/rate) cannot
be 0. Also the idea behind TBF is that the credit (token in buckets) fills if
no packet is transmitted. So that there is always a "positive" credit for new
packets. In real life this behavior contradicts the law of nature where
nothing can travel faster as speed of light. E.g.: on an emulated 1000 byte/s
link a small IPv4/TCP SYN packet with ~50 byte require ~0.05 seconds - not 0
seconds.

Netem is an excellent place to implement a rate limiting feature: static
delay is already implemented, tfifo already has time information and the
user can skip TBF configuration completely.

This patch implement rate feature which can be configured via tc. e.g:

	tc qdisc add dev eth0 root netem rate 10kbit

To emulate a link of 5000byte/s and add an additional static delay of 10ms:

	tc qdisc add dev eth0 root netem delay 10ms rate 5KBps

Note: similar to TBF the rate extension is bounded to the kernel timing
system. Depending on the architecture timer granularity, higher rates (e.g.
10mbit/s and higher) tend to transmission bursts. Also note: further queues
living in network adaptors; see ethtool(8).

Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30 23:18:35 -05:00
Eric Dumazet f7e57044ee sch_teql: fix lockdep splat
We need rcu_read_lock() protection before using dst_get_neighbour(), and
we must cache its value (pass it to __teql_resolve())

teql_master_xmit() is called under rcu_read_lock_bh() protection, its
not enough.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30 17:10:49 -05:00
Eric Dumazet 2bcc34bb98 sch_choke: use skb_flow_dissect()
Instead of using a custom flow dissector, use skb_flow_dissect() and
benefit from tunnelling support.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 13:17:03 -05:00
Eric Dumazet 11fca931d3 sch_sfq: use skb_flow_dissect()
Instead of using a custom flow dissector, use skb_flow_dissect() and
benefit from tunnelling support.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 13:17:03 -05:00
Tom Herbert 7346649826 net: Add queue state xoff flag for stack
Create separate queue state flags so that either the stack or drivers
can turn on XOFF.  Added a set of functions used in the stack to determine
if a queue is really stopped (either by stack or driver)

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 12:46:19 -05:00
Eric Dumazet a00bd469b6 sch_sfb: use skb_flow_dissect()
Current SFB double hashing is not fulfilling SFB theory, if two flows
share same rxhash value.

Using skb_flow_dissect() permits to really have better hash dispersion,
and get tunnelling support as well.

Double hashing point was mentioned by Florian Westphal

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28 19:09:28 -05:00