Commit Graph

316 Commits

Author SHA1 Message Date
Ross Lagerwall a108471b57 cifs: Check uniqueid for SMB2+ and return -ESTALE if necessary
Commit 7196ac113a ("Fix to check Unique id and FileType when client
refer file directly.") checks whether the uniqueid of an inode has
changed when getting the inode info, but only when using the UNIX
extensions. Add a similar check for SMB2+, since this can be done
without an extra network roundtrip.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2016-01-14 13:39:11 -06:00
Peter Zijlstra dfd01f0260 sched/wait: Fix the signal handling fix
Jan Stancek reported that I wrecked things for him by fixing things for
Vladimir :/

His report was due to an UNINTERRUPTIBLE wait getting -EINTR, which
should not be possible, however my previous patch made this possible by
unconditionally checking signal_pending().

We cannot use current->state as was done previously, because the
instruction after the store to that variable it can be changed.  We must
instead pass the initial state along and use that.

Fixes: 68985633bc ("sched/wait: Fix signal handling in bit wait helpers")
Reported-by: Jan Stancek <jstancek@redhat.com>
Reported-by: Chris Mason <clm@fb.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Chris Mason <clm@fb.com>
Reviewed-by: Paul Turner <pjt@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: tglx@linutronix.de
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: hpa@zytor.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-13 14:30:59 -08:00
Steve French 646200a041 [SMB3] Do not fall back to SMBWriteX in set_file_size error cases
The error paths in set_file_size for cifs and smb3 are incorrect.

In the unlikely event that a server did not support set file info
of the file size, the code incorrectly falls back to trying SMBWriteX
(note that only the original core SMB Write, used for example by DOS,
can set the file size this way - this actually  does not work for the more
recent SMBWriteX).  The idea was since the old DOS SMB Write could set
the file size if you write zero bytes at that offset then use that if
server rejects the normal set file info call.

Fortunately the SMBWriteX will never be sent on the wire (except when
file size is zero) since the length and offset fields were reversed
in the two places in this function that call SMBWriteX causing
the fall back path to return an error. It is also important to never call
an SMB request from an SMB2/sMB3 session (which theoretically would
be possible, and can cause a brief session drop, although the client
recovers) so this should be fixed.  In practice this path does not happen
with modern servers but the error fall back to SMBWriteX is clearly wrong.

Removing the calls to SMBWriteX in the error paths in cifs_set_file_size

Pointed out by PaX/grsecurity team

Signed-off-by: Steve French <steve.french@primarydata.com>
Reported-by: PaX Team <pageexec@freemail.hu>
CC: Emese Revfy <re.emese@gmail.com>
CC: Brad Spengler <spender@grsecurity.net>
CC: Stable <stable@vger.kernel.org>
2015-10-01 22:48:37 -05:00
Nakajima Akira 7196ac113a Fix to check Unique id and FileType when client refer file directly.
When you refer file directly on cifs client,
 (e.g. ls -li <filename>, cd <dir>, stat <filename>)
 the function return old inode number and filetype from old inode cache,
 though server has different inode number or filetype.

When server is Windows, cifs client has same problem.
When Server is Windows
, This patch fixes bug in different filetype,
  but does not fix bug in different inode number.
Because QUERY_PATH_INFO response by Windows does not include inode number(Index Number) .

BUG INFO
https://bugzilla.kernel.org/show_bug.cgi?id=90021
https://bugzilla.kernel.org/show_bug.cgi?id=90031

Reported-by: Nakajima Akira <nakajima.akira@nttcom.co.jp>
Signed-off-by: Nakajima Akira <nakajima.akira@nttcom.co.jp>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2015-05-20 13:05:25 -05:00
Nakajima Akira bc8ebdc4f5 Fix that several functions handle incorrect value of mapchars
Cifs client has problem with reserved chars filename.

[BUG1] : several functions handle incorrect value of mapchars
-	cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+	cifs_remap(cifs_sb));

[BUG2] : forget to convert reserved chars when creating SymbolicLink.
-	CIFSUnixCreateSymLink() calls cifs_strtoUTF16
+	CIFSUnixCreateSymLink() calls cifsConvertToUTF16() with remap

[BUG3] : forget to convert reserved chars when getting SymbolicLink.
-	CIFSSMBUnixQuerySymLink() calls cifs_strtoUTF16
+	CIFSSMBUnixQuerySymLink() calls cifsConvertToUTF16() with remap

[BUG4] : /proc/mounts don't show "mapposix" when using mapposix mount option
+	    cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SFM_CHR)
+ 		seq_puts(s, ",mapposix");

Reported-by: t.wede@kw-reneg.de
Reported-by: Nakajima Akira <nakajima.akira@nttcom.co.jp>
Signed-off-by: Nakajima Akira <nakajima.akira@nttcom.co.jp>
Signed-off-by: Carl Schaefer <schaefer@trilug.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2015-05-10 19:56:35 -05:00
David Howells 2b0143b5c9 VFS: normal filesystems (and lustre): d_inode() annotations
that's the bulk of filesystem drivers dealing with inodes of their own

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15 15:06:57 -04:00
Steve French 4c5930e805 Fix warning
Coverity reports a warning due to unitialized attr structure in one
code path.

Reported by Coverity (CID 728535)

Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Jeff Layton <jlayton@samba.org>
2015-04-01 00:01:47 -05:00
Christoph Hellwig b83ae6d421 fs: remove mapping->backing_dev_info
Now that we never use the backing_dev_info pointer in struct address_space
we can simply remove it and save 4 to 8 bytes in every inode.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-20 14:03:05 -07:00
Al Viro 946e51f2bf move d_rcu from overlapping d_child to overlapping d_alias
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-03 15:20:29 -05:00
Steve French b5b374eab1 Workaround Mac server problem
Mac server returns that they support CIFS Unix Extensions but
doesn't actually support QUERY_FILE_UNIX_BASIC so mount fails.

Workaround this problem by disabling use of Unix CIFS protocol
extensions if server returns an EOPNOTSUPP error on
QUERY_FILE_UNIX_BASIC during mount.

Signed-off-by: Steve French <smfrench@gmail.com>
2014-10-16 15:20:20 -05:00
Steve French 2baa268253 Remap reserved posix characters by default (part 3/3)
This is a bigger patch, but its size is mostly due to
a single change for how we check for remapping illegal characters
in file names - a lot of repeated, small changes to
the way callers request converting file names.

The final patch in the series does the following:

1) changes default behavior for cifs to be more intuitive.
Currently we do not map by default to seven reserved characters,
ie those valid in POSIX but not in NTFS/CIFS/SMB3/Windows,
unless a mount option (mapchars) is specified.  Change this
to by default always map and map using the SFM maping
(like the Mac uses) unless the server negotiates the CIFS Unix
Extensions (like Samba does when mounting with the cifs protocol)
when the remapping of the characters is unnecessary.  This should
help SMB3 mounts in particular since Samba will likely be
able to implement this mapping with its new "vfs_fruit" module
as it will be doing for the Mac.
2) if the user specifies the existing "mapchars" mount option then
use the "SFU" (Microsoft Services for Unix, SUA) style mapping of
the seven characters instead.
3) if the user specifies "nomapposix" then disable SFM/MAC style mapping
(so no character remapping would be used unless the user specifies
"mapchars" on mount as well, as above).
4) change all the places in the code that check for the superblock
flag on the mount which is set by mapchars and passed in on all
path based operation and change it to use a small function call
instead to set the mapping type properly (and check for the
mapping type in the cifs unicode functions)

Signed-off-by: Steve French <smfrench@gmail.com>
2014-10-16 15:20:20 -05:00
Steve French db8b631d4b Allow mknod and mkfifo on SMB2/SMB3 mounts
The "sfu" mount option did not work on SMB2/SMB3 mounts.
With these changes when the "sfu" mount option is passed in
on an smb2/smb2.1/smb3 mount the client can emulate (and
recognize) fifo and device (character and device files).

In addition the "sfu" mount option should not conflict
with "mfsymlinks" (symlink emulation) as we will never
create "sfu" style symlinks, but using "sfu" mount option
will allow us to recognize existing symlinks, created with
Microsoft "Services for Unix" (SFU and SUA).

To enable the "sfu" mount option for SMB2/SMB3 the calling
syntax of the generic cifs/smb2/smb3 sync_read and sync_write
protocol dependent function needed to be changed (we
don't have a file struct in all cases), but this actually
ended up simplifying the code a little.

Signed-off-by: Steve French <smfrench@gmail.com>
2014-10-16 15:20:19 -05:00
Al Viro 35c265e008 cifs: switch to use of %p[dD]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-09 02:39:03 -04:00
Pavel Shilovsky a07d322059 CIFS: Fix directory rename error
CIFS servers process nlink counts differently for files and directories.
In cifs_rename() if we the request fails on the existing target, we
try to remove it through cifs_unlink() but this is not what we want
to do for directories. As the result the following sequence of commands

mkdir {1,2}; mv -T 1 2; rmdir {1,2}; mkdir {1,2}; echo foo > 2/bar

and XFS test generic/023 fail with -ENOENT error. That's why the second
mkdir reuses the existing inode (target inode of the mv -T command) with
S_DEAD flag.

Fix this by checking whether the target is directory or not and
calling cifs_rmdir() rather than cifs_unlink() for directories.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2014-08-22 00:26:56 -05:00
Linus Torvalds 372b1dbdd1 Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
 "Most important fixes in this set include three SMB3 fixes for stable
  (including fix for possible kernel oops), and a workaround to allow
  writes to Mac servers (only cifs dialect, not more current SMB2.1,
  worked to Mac servers).  Also fallocate support added, and lease fix
  from Jeff"

* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
  [SMB3] Enable fallocate -z support for SMB3 mounts
  enable fallocate punch hole ("fallocate -p") for SMB3
  Incorrect error returned on setting file compressed on SMB2
  CIFS: Fix wrong directory attributes after rename
  CIFS: Fix SMB2 readdir error handling
  [CIFS] Possible null ptr deref in SMB2_tcon
  [CIFS] Workaround MacOS server problem with SMB2.1 write  response
  cifs: handle lease F_UNLCK requests properly
  Cleanup sparse file support by creating worker function for it
  Add sparse file support to SMB2/SMB3 mounts
  Add missing definitions for CIFS File System Attributes
  cifs: remove unused function cifs_oplock_break_wait
2014-08-20 18:33:21 -05:00
Pavel Shilovsky b46799a8f2 CIFS: Fix wrong directory attributes after rename
When we requests rename we also need to update attributes
of both source and target parent directories. Not doing it
causes generic/309 xfstest to fail on SMB2 mounts. Fix this
by marking these directories for force revalidating.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2014-08-17 05:08:46 -05:00
Linus Torvalds f6f993328b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "Stuff in here:

   - acct.c fixes and general rework of mnt_pin mechanism.  That allows
     to go for delayed-mntput stuff, which will permit mntput() on deep
     stack without worrying about stack overflows - fs shutdown will
     happen on shallow stack.  IOW, we can do Eric's umount-on-rmdir
     series without introducing tons of stack overflows on new mntput()
     call chains it introduces.
   - Bruce's d_splice_alias() patches
   - more Miklos' rename() stuff.
   - a couple of regression fixes (stable fodder, in the end of branch)
     and a fix for API idiocy in iov_iter.c.

  There definitely will be another pile, maybe even two.  I'd like to
  get Eric's series in this time, but even if we miss it, it'll go right
  in the beginning of for-next in the next cycle - the tricky part of
  prereqs is in this pile"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
  fix copy_tree() regression
  __generic_file_write_iter(): fix handling of sync error after DIO
  switch iov_iter_get_pages() to passing maximal number of pages
  fs: mark __d_obtain_alias static
  dcache: d_splice_alias should detect loops
  exportfs: update Exporting documentation
  dcache: d_find_alias needn't recheck IS_ROOT && DCACHE_DISCONNECTED
  dcache: remove unused d_find_alias parameter
  dcache: d_obtain_alias callers don't all want DISCONNECTED
  dcache: d_splice_alias should ignore DCACHE_DISCONNECTED
  dcache: d_splice_alias mustn't create directory aliases
  dcache: close d_move race in d_splice_alias
  dcache: move d_splice_alias
  namei: trivial fix to vfs_rename_dir comment
  VFS: allow ->d_manage() to declare -EISDIR in rcu_walk mode.
  cifs: support RENAME_NOREPLACE
  hostfs: support rename flags
  shmem: support RENAME_EXCHANGE
  shmem: support RENAME_NOREPLACE
  btrfs: add RENAME_NOREPLACE
  ...
2014-08-11 11:44:11 -07:00
Miklos Szeredi 7c33d5972c cifs: support RENAME_NOREPLACE
This flag gives CIFS the ability to support its native rename semantics.

Implementation is simple: just bail out before trying to hack around the
noreplace semantics.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-08-07 14:40:09 -04:00
NeilBrown c1221321b7 sched: Allow wait_on_bit_action() functions to support a timeout
It is currently not possible for various wait_on_bit functions
to implement a timeout.

While the "action" function that is called to do the waiting
could certainly use schedule_timeout(), there is no way to carry
forward the remaining timeout after a false wake-up.
As false-wakeups a clearly possible at least due to possible
hash collisions in bit_waitqueue(), this is a real problem.

The 'action' function is currently passed a pointer to the word
containing the bit being waited on.  No current action functions
use this pointer.  So changing it to something else will be a
little noisy but will have no immediate effect.

This patch changes the 'action' function to take a pointer to
the "struct wait_bit_key", which contains a pointer to the word
containing the bit so nothing is really lost.

It also adds a 'private' field to "struct wait_bit_key", which
is initialized to zero.

An action function can now implement a timeout with something
like

static int timed_out_waiter(struct wait_bit_key *key)
{
	unsigned long waited;
	if (key->private == 0) {
		key->private = jiffies;
		if (key->private == 0)
			key->private -= 1;
	}
	waited = jiffies - key->private;
	if (waited > 10 * HZ)
		return -EAGAIN;
	schedule_timeout(waited - 10 * HZ);
	return 0;
}

If any other need for context in a waiter were found it would be
easy to use ->private for some other purpose, or even extend
"struct wait_bit_key".

My particular need is to support timeouts in nfs_release_page()
to avoid deadlocks with loopback mounted NFS.

While wait_on_bit_timeout() would be a cleaner interface, it
will not meet my need.  I need the timeout to be sensitive to
the state of the connection with the server, which could change.
 So I need to use an 'action' interface.

Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steve French <sfrench@samba.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140707051604.28027.41257.stgit@notabene.brown
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-16 15:10:41 +02:00
NeilBrown 743162013d sched: Remove proliferation of wait_on_bit() action functions
The current "wait_on_bit" interface requires an 'action'
function to be provided which does the actual waiting.
There are over 20 such functions, many of them identical.
Most cases can be satisfied by one of just two functions, one
which uses io_schedule() and one which just uses schedule().

So:
 Rename wait_on_bit and        wait_on_bit_lock to
        wait_on_bit_action and wait_on_bit_lock_action
 to make it explicit that they need an action function.

 Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io
 which are *not* given an action function but implicitly use
 a standard one.
 The decision to error-out if a signal is pending is now made
 based on the 'mode' argument rather than being encoded in the action
 function.

 All instances of the old wait_on_bit and wait_on_bit_lock which
 can use the new version have been changed accordingly and their
 action functions have been discarded.
 wait_on_bit{_lock} does not return any specific error code in the
 event of a signal so the caller must check for non-zero and
 interpolate their own error code as appropriate.

The wait_on_bit() call in __fscache_wait_on_invalidate() was
ambiguous as it specified TASK_UNINTERRUPTIBLE but used
fscache_wait_bit_interruptible as an action function.
David Howells confirms this should be uniformly
"uninterruptible"

The main remaining user of wait_on_bit{,_lock}_action is NFS
which needs to use a freezer-aware schedule() call.

A comment in fs/gfs2/glock.c notes that having multiple 'action'
functions is useful as they display differently in the 'wchan'
field of 'ps'. (and /proc/$PID/wchan).
As the new bit_wait{,_io} functions are tagged "__sched", they
will not show up at all, but something higher in the stack.  So
the distinction will still be visible, only with different
function names (gds2_glock_wait versus gfs2_glock_dq_wait in the
gfs2/glock.c case).

Since first version of this patch (against 3.15) two new action
functions appeared, on in NFS and one in CIFS.  CIFS also now
uses an action function that makes the same freezer aware
schedule call as NFS.

Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: David Howells <dhowells@redhat.com> (fscache, keys)
Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2)
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steve French <sfrench@samba.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-16 15:10:39 +02:00
Linus Torvalds b1cce8032f Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull CIFS fixes from Steve French.

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Fix memory leaks in SMB2_open
  cifs: ensure that vol->username is not NULL before running strlen on it
  Clarify SMB2/SMB3 create context and add missing ones
  Do not send ClientGUID on SMB2.02 dialect
  cifs: Set client guid on per connection basis
  fs/cifs/netmisc.c: convert printk to pr_foo()
  fs/cifs/cifs.c: replace seq_printf by seq_puts
  Update cifs version number to 2.03
  fs: cifs: new helper: file_inode(file)
  cifs: fix potential races in cifs_revalidate_mapping
  cifs: new helper function: cifs_revalidate_mapping
  cifs: convert booleans in cifsInodeInfo to a flags field
  cifs: fix cifs_uniqueid_to_ino_t not to ever return 0
2014-06-09 19:08:43 -07:00
Jeff Layton 4f73c7d342 cifs: fix potential races in cifs_revalidate_mapping
The handling of the CIFS_INO_INVALID_MAPPING flag is racy. It's possible
for two tasks to attempt to revalidate the mapping at the same time. The
first sees that CIFS_INO_INVALID_MAPPING is set. It clears the flag and
then calls invalidate_inode_pages2 to start shooting down the pagecache.

While that's going on, another task checks the flag and sees that it's
clear. It then ends up trusting the pagecache to satisfy a read when it
shouldn't.

Fix this by adding a bitlock to ensure that the clearing of the flag is
atomic with respect to the actual cache invalidation. Also, move the
other existing users of cifs_invalidate_mapping to use a new
cifs_zap_mapping() function that just sets the INVALID_MAPPING bit and
then uses the standard codepath to handle the invalidation.

Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Steve French <smfrench@gmail.com>
2014-05-21 10:18:05 -07:00
Jeff Layton e284e53fde cifs: new helper function: cifs_revalidate_mapping
Consolidate a bit of code. In a later patch we'll expand this to fix
some races.

Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Steve French <smfrench@gmail.com>
2014-05-21 10:18:05 -07:00
Jeff Layton aff8d5ca7a cifs: convert booleans in cifsInodeInfo to a flags field
In later patches, we'll need to have a bitlock, so go ahead and convert
these bools to use atomic bitops instead.

Also, clean up the initialization of the flags field. There's no need
to unset each bit individually just after it was zeroed on allocation.

Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Steve French <smfrench@gmail.com>
2014-05-21 10:18:05 -07:00
Jeff Layton a87c9ad956 cifs: fix actimeo=0 corner case when cifs_i->time == jiffies
actimeo=0 is supposed to be a special case that ensures that inode
attributes are always refetched from the server instead of trusting the
cache. The cifs code however uses time_in_range() to determine whether
the attributes have timed out. In the case where cifs_i->time equals
jiffies, this leads to the cifs code not refetching the inode attributes
when it should.

Fix this by explicitly testing for actimeo=0, and handling it as a
special case.

Reported-and-tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2014-04-24 22:37:03 -05:00
Steve French 42eacf9e57 [CIFS] Fix cifsacl mounts over smb2 to not call cifs
When mounting with smb2/smb3 (e.g. vers=2.1) and cifsacl mount option,
it was trying to get the mode by querying the acl over the cifs
rather than smb2 protocol.  This patch makes that protocol
independent and makes cifsacl smb2 mounts return a more intuitive
operation not supported error (until we add a worker function
for smb2_get_acl).

Note that a previous patch fixed getxattr/setxattr for the CIFSACL xattr
which would unconditionally call cifs_get_acl and cifs_set_acl (even when
mounted smb2). I made those protocol independent last week (new protocol
version operations "get_acl" and "set_acl" but did not add an
smb2_get_acl and smb2_set_acl yet so those now simply return EOPNOTSUPP
which at least is better than sending cifs requests on smb2 mount)

The previous patches did not fix the one remaining case though ie
mounting with "cifsacl" when getting mode from acl would unconditionally
end up calling "cifs_get_acl_from_fid" even for smb2 - so made that protocol
independent but to make that protocol independent had to make sure that the callers
were passing the protocol independent handle structure (cifs_fid) instead
of cifs specific _u16 network file handle (ie cifs_fid instead of cifs_fid->fid)

Now mount with smb2 and cifsacl mount options will return EOPNOTSUP (instead
of timing out) and a future patch will add smb2 operations (e.g. get_smb2_acl)
to enable this.

Signed-off-by: Steve French <smfrench@gmail.com>
2014-02-10 14:08:16 -06:00
Steve French d979f3b0a1 Add protocol specific operation for CIFS xattrs
Changeset 666753c3ef added protocol
operations for get/setxattr to avoid calling cifs operations
on smb2/smb3 mounts for xattr operations and this changeset
adds the calls to cifs specific protocol operations for xattrs
(in order to reenable cifs support for xattrs which was
temporarily disabled by the previous changeset.  We do not
have SMB2/SMB3 worker function for setting xattrs yet so
this only enables it for cifs.

CCing stable since without these two small changsets (its
small coreq 666753c3ef is
also needed) calling getfattr/setfattr on smb2/smb3 mounts
causes problems.

Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
CC: Stable <stable@kernel.org>
2014-02-07 11:08:15 -06:00
Pavel Shilovsky d81b8a40e2 CIFS: Cleanup cifs open codepath
Rename CIFSSMBOpen to CIFS_open and make it take
cifs_open_parms structure as a parm.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20 09:52:13 -06:00
Pavel Shilovsky 0360d605a2 CIFS: Remove extra indentation in cifs_sfu_type
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20 09:52:09 -06:00
Sachin Prabhu cb084b1a9b cifs: Rename MF symlink function names
Clean up camel case in functionnames.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2014-01-20 00:13:54 -06:00
Sachin Prabhu 750b8de6c4 cifs: We do not drop reference to tlink in CIFSCheckMFSymlink()
When we obtain tcon from cifs_sb, we use cifs_sb_tlink() to first obtain
tlink which also grabs a reference to it. We do not drop this reference
to tlink once we are done with the call.

The patch fixes this issue by instead passing tcon as a parameter and
avoids having to obtain a reference to the tlink. A lookup for the tcon
is already made in the calling functions and this way we avoid having to
re-run the lookup. This is also consistent with the argument list for
other similar calls for M-F symlinks.

We should also return an ENOSYS when we do not find a protocol specific
function to lookup the MF Symlink data.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
CC: Stable <stable@kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-12-27 15:14:44 -06:00
Pavel Shilovsky eb85d94bdd CIFS: Fix symbolic links usage
Now we treat any reparse point as a symbolic link and map it to a Unix
one that is not true in a common case due to many reparse point types
supported by SMB servers.

Distinguish reparse point types into two groups:
1) that can be accessed directly through a reparse point
(junctions, deduplicated files, NFS symlinks);
2) that need to be processed manually (Windows symbolic links, DFS);

and map only Windows symbolic links to Unix ones.

Cc: <stable@vger.kernel.org>
Acked-by: Jeff Layton <jlayton@redhat.com>
Reported-and-tested-by: Joao Correia <joaomiguelcorreia@gmail.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-11-11 16:31:03 -06:00
Jim McDonough 74d290da47 [CIFS] Provide sane values for nlink
Since we don't get info about the number of links from the readdir
linfo levels, stat() will return 0 for st_nlink, and in particular,
samba re-exported shares will show directories as files (as samba is
keying off st_nlink before evaluating how to set the dos modebits)
when doing a dir or ls.

Copy nlink to the inode, unless it wasn't provided.  Provide
sane values if we don't have an existing one and none was provided.

Signed-off-by: Jim McDonough <jmcd@samba.org>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-21 10:36:10 -05:00
Linus Torvalds ac4de9543a Merge branch 'akpm' (patches from Andrew Morton)
Merge more patches from Andrew Morton:
 "The rest of MM.  Plus one misc cleanup"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (35 commits)
  mm/Kconfig: add MMU dependency for MIGRATION.
  kernel: replace strict_strto*() with kstrto*()
  mm, thp: count thp_fault_fallback anytime thp fault fails
  thp: consolidate code between handle_mm_fault() and do_huge_pmd_anonymous_page()
  thp: do_huge_pmd_anonymous_page() cleanup
  thp: move maybe_pmd_mkwrite() out of mk_huge_pmd()
  mm: cleanup add_to_page_cache_locked()
  thp: account anon transparent huge pages into NR_ANON_PAGES
  truncate: drop 'oldsize' truncate_pagecache() parameter
  mm: make lru_add_drain_all() selective
  memcg: document cgroup dirty/writeback memory statistics
  memcg: add per cgroup writeback pages accounting
  memcg: check for proper lock held in mem_cgroup_update_page_stat
  memcg: remove MEMCG_NR_FILE_MAPPED
  memcg: reduce function dereference
  memcg: avoid overflow caused by PAGE_ALIGN
  memcg: rename RESOURCE_MAX to RES_COUNTER_MAX
  memcg: correct RESOURCE_MAX to ULLONG_MAX
  mm: memcg: do not trap chargers with full callstack on OOM
  mm: memcg: rework and document OOM waiting and wakeup
  ...
2013-09-12 15:44:27 -07:00
Kirill A. Shutemov 7caef26767 truncate: drop 'oldsize' truncate_pagecache() parameter
truncate_pagecache() doesn't care about old size since commit
cedabed49b ("vfs: Fix vmtruncate() regression").  Let's drop it.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 15:38:02 -07:00
Pavel Shilovsky 18cceb6a78 CIFS: Replace clientCanCache* bools with an integer
that prepare the code to handle different types of SMB2 leases.

Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08 17:49:17 -05:00
Pavel Shilovsky b42bf88828 CIFS: Implement follow_link for SMB2
that allows to access files through symlink created on a server.

Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08 14:27:34 -05:00
Steve French 6658b9f70e [CIFS] use sensible file nlink values if unprovided
Certain servers may not set the NumberOfLinks field in query file/path
info responses. In such a case, cifs_inode_needs_reval() assumes that
all regular files are hardlinks and triggers revalidation, leading to
excessive and unnecessary network traffic.

This change hardcodes cf_nlink (and subsequently i_nlink) when not
returned by the server, similar to what already occurs in cifs_mkdir().

Cc: <stable@vger.kernel.org>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-07-04 14:38:48 -05:00
Jeff Layton c2b93e0699 cifs: only set ops for inodes in I_NEW state
It's generally not safe to reset the inode ops once they've been set. In
the case where the inode was originally thought to be a directory and
then later found to be a DFS referral, this can lead to an oops when we
try to trigger an inode op on it after changing the ops to the blank
referral operations.

Cc: <stable@vger.kernel.org>
Reported-and-Tested-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-05-08 17:12:47 -05:00
Joe Perches f96637be08 [CIFS] cifs: Rename cERROR and cFYI to cifs_dbg
It's not obvious from reading the macro names that these macros
are for debugging.  Convert the names to a single more typical
kernel style cifs_dbg macro.

	cERROR(1, ...)   -> cifs_dbg(VFS, ...)
	cFYI(1, ...)     -> cifs_dbg(FYI, ...)
	cFYI(DBG2, ...)  -> cifs_dbg(NOISY, ...)

Move the terminating format newline from the macro to the call site.

Add CONFIG_CIFS_DEBUG function cifs_vfs_err to emit the
"CIFS VFS: " prefix for VFS messages.

Size is reduced ~ 1% when CONFIG_CIFS_DEBUG is set (default y)

$ size fs/cifs/cifs.ko*
   text    data     bss     dec     hex filename
 265245	   2525	    132	 267902	  4167e	fs/cifs/cifs.ko.new
 268359    2525     132  271016   422a8 fs/cifs/cifs.ko.old

Other miscellaneous changes around these conversions:

o Miscellaneous typo fixes
o Add terminating \n's to almost all formats and remove them
  from the macros to be more kernel style like.  A few formats
  previously had defective \n's
o Remove unnecessary OOM messages as kmalloc() calls dump_stack
o Coalesce formats to make grep easier,
  added missing spaces when coalescing formats
o Use %s, __func__ instead of embedded function name
o Removed unnecessary "cifs: " prefixes
o Convert kzalloc with multiply to kcalloc
o Remove unused cifswarn macro

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-05-04 22:17:23 -05:00
Sachin Prabhu 47c78f4a70 cifs: map NT_STATUS_SHARING_VIOLATION to EBUSY instead of ETXTBSY
NT_SHARING_VIOLATION errors are mapped to ETXTBSY which is unexpected
for operations such as unlink where we can hit these errors.

The patch maps the error NT_SHARING_VIOLATION to EBUSY instead. The
patch also replaces all instances of ETXTBSY in
cifs_rename_pending_delete() with EBUSY.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2013-03-13 14:09:20 -05:00
Sachin Prabhu c483a9841d cifs: Check server capability before attempting silly rename
cifs_rename_pending_delete() attempts to silly rename file using
CIFSSMBRenameOpenFile(). This uses the SET_FILE_INFORMATION TRANS2
command with information level set to the passthru info-level
SMB_SET_FILE_RENAME_INFORMATION.

We need to check to make sure that the server support passthru
info-levels before attempting the silly rename or else we will fail to
rename the file.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2013-03-06 18:30:04 -06:00
Sachin Prabhu 72d282dc51 cifs: Fix bug when checking error condition in cifs_rename_pending_delete()
Fix check for error condition after setting attributes with
CIFSSMBSetFileInfo().

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2013-03-06 18:28:35 -06:00
Sasha Levin b67bfe0d42 hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Linus Torvalds d895cb1af1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has ->d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...
2013-02-26 20:16:07 -08:00
Al Viro 496ad9aa8e new helper: file_inode(file)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22 23:31:31 -05:00
Eric W. Biederman 4a2c8cf569 cifs: Convert struct cifs_fattr to use kuid and kgids
In cifs_unix_to_basic_fattr only update the cifs_fattr with an id if
it is valid after conversion.

Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 07:28:51 -08:00
Eric W. Biederman 49418b2c28 cifs: Modify struct cifs_unix_set_info_args to hold a kuid_t and a kgid_t
Use INVALID_UID and INVALID_GID instead of NO_CHANGE_64 to indicate
the value should not be changed.

In cifs_fill_unix_set_info convert from kuids and kgids into uids and
gids that will fit in FILE_UNIX_BASIC_INFO.

Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 07:28:49 -08:00
Eric W. Biederman 8abf2775dd cifs: Use kuids and kgids SID to uid/gid mapping
Update id_mode_to_cifs_acl to take a kuid_t and a kgid_t.

Replace NO_CHANGE_32 with INVALID_UID and INVALID_GID, and tests for
NO_CHANGE_32 with uid_valid and gid_valid.

Carefully unpack the value returned from request_key.  memcpy the
value into the expected type.  The convert the uid/gid into a
kuid/kgid.  And then only if the result is a valid kuid or kgid update
fuid/fgid.

Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 07:28:47 -08:00
Eric W. Biederman 46bbc25f9f cifs: Override unmappable incoming uids and gids
The cifs protocol has a 64bit space for uids and gids, while linux
only supports a 32bit space today.  Instead of silently truncating
64bit cifs ids, replace cifs ids that do not fit in the 32bit linux
id space with the default uid and gids for the cifs mount.

Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 07:28:36 -08:00