Commit Graph

34 Commits

Author SHA1 Message Date
Krzysztof Kozlowski f2483b0d19 mmc: rtsx: Constify platform_device_id
The platform_device_id is not modified by the driver and core uses it as
const.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:06:50 +02:00
Micky Ching be186ad582 mmc: rtsx: check sg_count before long data xfer
Check sg_count before sending long data xfer.
Because dma_map_sg() return int, and sg_count may be negative,
so using int instead of unsigned.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-21 13:58:44 +01:00
Micky Ching b22217f966 mmc: rtsx: finish request if no card exist
Return error-code directly if no card exist, this can
make card remove faster.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-21 13:56:55 +01:00
Micky Ching 56d1c0d941 mmc: rtsx: swap function position to avoid pre declaration
move function sd_read_data()/sd_write_data() behind
sd_send_cmd_get_rsp() to avoid pre-declaration.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19 09:56:20 +01:00
Micky Ching 1dcb35799e mmc: rtsx: add support for sdio card
Modify transfer mode for support sdio card,
send cmd and data at the same time for read data transfer,
but send data after cmd for write data transfer.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19 09:56:20 +01:00
Micky Ching 2d48e5f1be mmc: rtsx: add helper function to simplify code
To support sdio card, transfer mode need make a change,
this need to split code and use it in different place,
Add new function to simplify repeat operation.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19 09:56:19 +01:00
Micky Ching 2057647f0c mmc: rtsx: init cookie at probe/card_event
host->cookie is used for handle async request,
we should init it to negative value when new card inserted,
make cookie value invalid.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19 09:56:19 +01:00
Micky Ching 755987f9a3 mmc: rtsx: add dump_reg_range to simplify dump register
Add a new function to dump register within a range.
We print 1 register a line before this patch,
this may make debug info too long when we add more register to dump.

The new dump_reg_range() dump to 8 register a line,
and it is easy to use.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19 09:56:18 +01:00
Roger Tseng 517bf80fe7 mmc: rtsx_pci: Set power related cap2 macros
Set MMC_CAP2_NO_PRESCAN_POWERUP and MMC_CAP2_FULL_PWR_CYCLE for
rtsx_pci_sdmmc and rtsx_usb_sdmmc to reflect properties of Realtek
card reader hosts.

Signed-off-by: Roger Tseng <rogerable@realtek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-24 11:20:16 +02:00
Peter Griffin 2137f5d3b8 mmc: remove .owner field for drivers using module_platform_driver
This patch removes the superflous .owner field for drivers which
use the module_platform_driver API, as this is overriden in
platform_driver_register anyway.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09 13:59:04 +02:00
Roger Tseng d1419d50c1 mmc: rtsx_pci_sdmmc: fix incorrect last byte in R2 response
Current code erroneously fill the last byte of R2 response with an undefined
value. In addition, the controller actually 'offloads' the last byte
(CRC7, end bit) while receiving R2 response and thus it's impossible to get the
actual value. This could cause mmc stack to obtain inconsistent CID from the
same card after resume and misidentify it as a different card.

Fix by assigning dummy CRC and end bit: {7'b0, 1} = 0x1 to the last byte of R2.

Cc: <stable@vger.kernel.org> # v3.8+
Fixes: ff984e57d3 ("mmc: Add realtek pcie sdmmc host driver")
Signed-off-by: Roger Tseng <rogerable@realtek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09 13:59:01 +02:00
Micky Ching 6291e7153a mmc: rtsx: add support for async request
Add support for non-blocking request, pre_req() runs dma_map_sg() and
post_req() runs dma_unmap_sg(). This patch can increase card read/write
speed, especially for high speed card and slow speed CPU.

Test on intel i3(800MHz - 2.3GHz) performance mode(2.3GHz), SD card
clock 208MHz

run dd if=/dev/mmcblk0 of=/dev/null bs=64k count=1024
before:
67108864 bytes (67 MB) copied, 0.85427 s, 78.6 MB/s
after:
67108864 bytes (67 MB) copied, 0.74799 s, 89.7 MB/s

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09 14:17:15 +01:00
Linus Torvalds 07888238f5 MMC highlights for 3.16:
Core:
  - support HS400 mode of eMMC 5.0, via DT bindings mmc-hs400-1_{2,8}v
  - if card init at 3.3v doesn't work, try 1.8v and 1.2v too
 
 Drivers:
  - moxart: New driver for MOXA ART SoCs
  - rtsx_usb_sdmmc: New driver for Realtek USB card readers
  - sdhci: Large rework around IRQ/regulator handling, remove card_tasklet
  - sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
  - sunxi: New driver for Allwinner sunxi SoCs
  - usdhi6rol0: New driver for Renesas SD/SDIO controller
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTl199AAoJEHNBYZ7TNxYMutUQAIHOkbFeEmHiwhhM5snpywAg
 wRLIdiOWTYGrqRzvINDGsH4MVpt+acK5QuS5rNO5sEqhSovAZCNbQAvI4wXP60Uy
 bnXyqnq7uPHjQxUWu9ES1l3gvX1djLVCD0f5sqyG1nL4SA3h8CFbEKkGHEMEXpWY
 tOwUGxrM6IHk1Z7l1FzWiN4nidvsX9maKDiCEyCF86xMEyqsxd/gz5pjhF3GgZBY
 z174+XU7Vlb5HkpeH/anhSVfYALURlRNNdtJaMQoR1Goldhr/KfnaqkuQNLanqOS
 R1BselxeZxFUcSGJ87WrLE7jFa9i9qUzMdxJRrzssNCA7JZl1hOwTE4EAFCxMADZ
 fbZl/kwoQo/nO6HHQtJ3J+UeinA9aFGUR0jpN8l9jZkwb9VsyYenrd27+OcUcJGP
 ZyQ636oT+mB44RwHBz2mZVLLTrV84x9d4VVqjZ3QrMYNWVhXyIyjFSinoJvcNGOk
 xQ4zsAsyPXHzr6pR6diKab8tLYC+VoeWKdmqPDQtPY+L+D23qQNAarvS1oPjsgx8
 IZIIdh4ikftsXALriU2OqVi3zIw+mVTDlq7xp3gSI/Zf4Srlx+6V0X7KVUVoMB0h
 O19+HgKJv6pCoL54+FgFDdKcgdUANWG2s/BSmhRNgFJY97/tvahHlyoTmrVhXqil
 L/nmuknP3lB4RTQ7E5Kk
 =OZao
 -----END PGP SIGNATURE-----

Merge tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC update from Chris Ball:
 "MMC highlights for 3.16:

  Core:
   - support HS400 mode of eMMC 5.0, via DT bindings mmc-hs400-1_{2,8}v
   - if card init at 3.3v doesn't work, try 1.8v and 1.2v too

  Drivers:
   - moxart: New driver for MOXA ART SoCs
   - rtsx_usb_sdmmc: New driver for Realtek USB card readers
   - sdhci: Large rework around IRQ/regulator handling, remove card_tasklet
   - sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
   - sunxi: New driver for Allwinner sunxi SoCs
   - usdhi6rol0: New driver for Renesas SD/SDIO controller"

* tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (95 commits)
  mmc: sdhci-s3c: use mmc_of_parse and remove the card_tasklet
  mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller
  mmc: sdhci-of-esdhc: Fixup compile error
  mmc: tegra: fix reporting of base clock frequency
  mmc: tegra: disable UHS modes
  mmc: sdhci-dove: use mmc_of_parse() and remove card_tasklet CD handler
  MAINTAINERS: mmc: Add path to git tree
  mmc: dove: fix missing MACH_DOVE dependency
  mmc: sdhci: SD tuning is broken for some controllers
  mmc: sdhci-esdhc-imx: fix mmc ddr mode regression issue
  mmc: sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
  mmc: omap_hsmmc: split omap-dma header file
  mmc: omap_hsmmc: fix cmd23 multiblock read/write
  mmc: omap_hsmmc: use devm_ioremap_resource
  mmc: omap_hsmmc: use devm_request_threaded_irq
  mmc: omap_hsmmc: use devm_request_irq
  mmc: omap_hsmmc: use devm_clk_get
  mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs
  mmc: wmt-sdmmc: Use GFP_KERNEL instead of hard-coded value
  mmc: omap: Use DIV_ROUND_UP instead of open coded
  ...
2014-06-10 14:35:22 -07:00
Micky Ching 98fcc5762d mmc: rtsx: Revert "mmc: rtsx: add support for pre_req and post_req"
This reverts commit c42deffd5b.

commit <mmc: rtsx: add support for pre_req and post_req> did use
mutex_unlock() in tasklet, but mutex_unlock() can't be used in
tasklet(atomic context). The driver needs to use mutex to avoid
concurrency, so we can't use tasklet here, the patch need to be
removed.

The spinlock host->lock and pcr->lock may deadlock, one way to solve
the deadlock is remove host->lock in sd_isr_done_transfer(), but if
using workqueue the we can avoid using the spinlock and also avoid
the problem.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-05-08 08:44:50 +01:00
Micky Ching 5027251ece mmc: rtsx: add R1-no-CRC mmc command type handle
a27fbf2f06 ("mmc: add ignorance case for CMD13 CRC error") produced
a cmd.flags unhandled in realtek pci host driver.  This will make MMC
card fail to initialize, this patch is used to handle the new cmd.flags
condition and MMC card can be used.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-04-22 07:06:40 -04:00
Seungwon Jeon 1a0ae377bf mmc: rtsx: clarify DDR timing mode between SD-UHS and eMMC
Added MMC_DDR52 as eMMC's DDR mode is distinguished from SD-UHS.

CC: Wei WANG <wei_wang@realsil.com.cn>
CC: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
2014-04-20 16:59:56 -04:00
Micky Ching c42deffd5b mmc: rtsx: add support for pre_req and post_req
Add support for non-blocking request, pre_req() runs dma_map_sg() and
post_req() runs dma_unmap_sg(). This patch can increase card read/write
speed, especially for high speed card and slow CPU(for some embedded
platform).

Users can get a great benefit from this patch. if CPU frequency is 800MHz,
SDR104 or DDR50 card read/write speed may increase more than 15%.

test results:
intel i3(800MHz - 2.3GHz), SD card clock 208MHz

performance mode(2.3GHz):
Before:
dd if=/dev/mmcblk0p1 of=/dev/null bs=64k count=1024
67108864 bytes (67 MB) copied, 1.18191 s, 56.8 MB/s
After:
 dd if=/dev/mmcblk0p1 of=/dev/null bs=64k count=1024
67108864 bytes (67 MB) copied, 1.09276 s, 61.4 MB/s

powersave mode(800MHz):
Before:
dd if=/dev/mmcblk0p1 of=/dev/null bs=64k count=1024
67108864 bytes (67 MB) copied, 1.29569 s, 51.8 MB/s
After:
dd if=/dev/mmcblk0p1 of=/dev/null bs=64k count=1024
67108864 bytes (67 MB) copied, 1.11218 s, 60.3 MB/s

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22 13:34:20 -05:00
Micky Ching abcc6b2943 mmc: rtsx: modify phase searching method for tuning
The new phase searching method is more concise and easier to
understand.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22 13:34:18 -05:00
Micky Ching 640e09bc45 mmc: rtsx: fix card poweroff bug
If the host driver removed while card in the slot, the host will not
power off card power correctly. This bug is produced because host
eject flag set before the last mmc_set_ios callback, we should set the
eject flag after power off.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22 13:33:38 -05:00
Ulf Hansson ff71c4bcb0 mmc: rtsx: Remove redundant suspend and resume callbacks
Suspend and resume of cards are handled by the protocol layer and
consequently the mmc_suspend|resume_host APIs are marked as deprecated.

While moving away from using the deprecated APIs, there are nothing
left to be done for the suspend and resume callbacks, so remove them.

Cc: Wei WANG <wei_wang@realsil.com.cn>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-10-30 20:28:31 -04:00
Jackey Shen 71ef1ea418 mmc: core: clean up duplicate macros
Clean up the duplicate macros:
mmc_sd_card_uhs -> mmc_card_uhs
mmc_sd_card_set_uhs -> mmc_card_set_uhs

Signed-off-by: Jackey Shen <jackey.shen@amd.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-09-25 21:51:52 -04:00
Wei WANG 6228218064 mmc: memstick: rtsx: Modify copyright comments
Update copyright date, and remove author address.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-30 14:25:10 +02:00
Wei WANG 1b8055b490 mmc: rtsx: Clear SD_CLK toggle enable bit if switching voltage fail
If switching voltage fails, SD_CLK toggle enable bit should been cleared
so that SD host can control SD clock automatically.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-30 14:25:00 +02:00
Wei WANG 84d72f9cc2 mfd: mmc: rtsx: Change default tx phase
The default phase can meet most cards' requirement, but it is not the
optimal one. In some extreme situation, the rx phase point produced by
the following tuning process will drift quite a distance.
Before tuning UHS card, this patch will set a more proper initial tx
phase point, which is calculated from statistic data, and can achieve
a much better tx signal quality.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-30 14:24:07 +02:00
Jingoo Han 113a87f868 mmc: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure, since commit 0998d06310
(device-core: Ensure drvdata = NULL when no driver is bound).
Thus, it is not needed to manually clear the device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:23 -04:00
Wei WANG d88691be7b mmc: rtsx_pci_sdmmc: Don't execute power up sequence repeatedly
For some Realtek card readers, the power up sequence can only be executed
when power has been turned off fully.

So the rtsx host should not start power up sequence again when set_ios
been called if the power has been turned on.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:35:42 -04:00
Linus Torvalds ed5dc2372d MMC highlights for 3.9:
Core:
  - Support for packed commands in eMMC 4.5.  (This requires a host
    capability to be turned on.  It increases write throughput by 20%+,
    but may also increase average write latency; more testing needed.)
  - Add DT bindings for capability flags.
  - Add mmc_of_parse() for shared DT parsing between drivers.
 
 Drivers:
  - android-goldfish: New MMC driver for the Android Goldfish emulator.
  - mvsdio: Add DT bindings, pinctrl, use slot-gpio for card detection.
  - omap_hsmmc: Fix boot hangs with RPMB partitions.
  - sdhci-bcm2835: New driver for controller used by Raspberry Pi.
  - sdhci-esdhc-imx: Add 8-bit data, auto CMD23 support, use slot-gpio.
  - sh_mmcif: Add support for eMMC DDR, bundled MMCIF IRQs.
  - tmio_mmc: Add DT bindings, support for vccq regulator.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIcBAABAgAGBQJRKmwHAAoJEHNBYZ7TNxYMNBYP/2FZRY33nrnJ0yKeMpyfdH+C
 LN+33imQudA2t86FlbAOocvcpM12oTPy+DkIbFchWhN1O4lzrqMos8/527QUm9qL
 cyCnZXrbst/Ttrs3UIbfkKNhA1m4Wau/taNPJ0fWqdmZU4424O774xSOyyB8m9x/
 DKuPIs6B9AfVAlS+OM8ZtviIvsJRgC6amZ0mNQZIKGHPm7vCTg6n35tP1ux7ZvJQ
 4dMlgqRalV+xN9gNBnCVLOc2eSwEyxIJA2m13LTHGf72pkNvSdYrID87qTJbvXOl
 Ed7PHuU3+M5bHw7ErCkbi8rmwuSuc8omNt9WK+syGLx4g7v7GceIYHNQudatdN7O
 gYUWnufT6Om6y+6h9QJ5td4ZZ7i6MhfC1Ps8hJCUjiVn+cLKlEPj0KmLAhZm+6cu
 wuBdCujeAFu7Z5VcaO2TBLHXXsgggnWbpoq7v6fucCNIleBe598Nu2YJAdbMc+W4
 8mONN4ANslTw7CAMrL3C99Ab1WVLZenX38schgDisTkGnI8dr/JCD4OpqAnPSKql
 qD5KCKRb8O4BMZpQxiFwyTzqYpmNM9RkaIykLxY5y26lgwFI+At9wh1HnhFC4Hl/
 ReJ5Cnm8sH19Vgz+5zpZzzS5/aCssObdfFImIfw1wWzwk9A8EHSjAZsVUkzXiVd4
 yRwz6eeO3gBMZ+v2humV
 =dYdW
 -----END PGP SIGNATURE-----

Merge tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC update from Chris Ball:
 "MMC highlights for 3.9:

  Core:
   - Support for packed commands in eMMC 4.5.  (This requires a host
     capability to be turned on.  It increases write throughput by 20%+,
     but may also increase average write latency; more testing needed.)
   - Add DT bindings for capability flags.
   - Add mmc_of_parse() for shared DT parsing between drivers.

  Drivers:
   - android-goldfish: New MMC driver for the Android Goldfish emulator.
   - mvsdio: Add DT bindings, pinctrl, use slot-gpio for card detection.
   - omap_hsmmc: Fix boot hangs with RPMB partitions.
   - sdhci-bcm2835: New driver for controller used by Raspberry Pi.
   - sdhci-esdhc-imx: Add 8-bit data, auto CMD23 support, use slot-gpio.
   - sh_mmcif: Add support for eMMC DDR, bundled MMCIF IRQs.
   - tmio_mmc: Add DT bindings, support for vccq regulator"

* tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (92 commits)
  mmc: tegra: assume CONFIG_OF, remove platform data
  mmc: add DT bindings for more MMC capability flags
  mmc: tmio: add support for the VccQ regulator
  mmc: tmio: remove unused and deprecated symbols
  mmc: sh_mobile_sdhi: use managed resource allocations
  mmc: sh_mobile_sdhi: remove unused .pdata field
  mmc: tmio-mmc: parse device-tree bindings
  mmc: tmio-mmc: define device-tree bindings
  mmc: sh_mmcif: use mmc_of_parse() to parse standard MMC DT bindings
  mmc: (cosmetic) remove "extern" from function declarations
  mmc: provide a standard MMC device-tree binding parser centrally
  mmc: detailed definition of CD and WP MMC line polarities in DT
  mmc: sdhi, tmio: only check flags in tmio-mmc driver proper
  mmc: sdhci: Fix parameter of sdhci_do_start_signal_voltage_switch()
  mmc: sdhci: check voltage range only on regulators aware of voltage value
  mmc: bcm2835: set SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
  mmc: support packed write command for eMMC4.5 devices
  mmc: add packed command feature of eMMC4.5
  mmc: rtsx: remove driving adjustment
  mmc: use regulator_can_change_voltage() instead of regulator_count_voltages
  ...
2013-02-26 09:31:09 -08:00
Roger Tseng ac48653cec mmc: rtsx: remove driving adjustment
Several new models of readers use different way to select driving
capability (a necessary adjustment along with voltage change). Removing
this from device-independent rtsx_pci_sdmmc module. It will be implemented
in device-depend calls encapsulated by rtsx_pci_switch_output_voltage().

Signed-off-by: Roger Tseng <rogerable@realtek.com>
Reviewed-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:15 -05:00
Wei WANG c3481955f6 mfd: rtsx: Fix issue that booting OS with SD card inserted
Realtek card reader supports both SD and MS card. According to the
settings of rtsx MFD driver, SD host will be probed before MS host.
If we boot/reboot Linux with SD card inserted, the resetting flow of SD
card will succeed, and the following resetting flow of MS is sure to fail.
Then MS upper-level driver will ask rtsx driver to turn power off. This
request leads to the result that the following SD commands fail and SD card
can't be accessed again.

In this commit, Realtek's SD and MS host driver will check whether the card
that upper driver requesting is the one existing in the slot. If not, Realtek's
host driver will refuse the operation to make sure the exlusive accessing
at the same time.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14 00:24:12 +01:00
Wei WANG ef85e736b1 mmc: rtsx: Call MFD hook to switch output voltage
Different card reader has different method to switch output voltage, so
we have to use the callback function provided by MFD driver to switch
output pad voltage.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-27 01:29:57 +01:00
Wei WANG 433e075c7f mmc: rtsx: Explicitely include slab.h in rtsx_pci_sdmmc.c
This fixes the following build error on some architectures (parisc at least):

drivers/mmc/host/rtsx_pci_sdmmc.c: In function 'sd_normal_rw':
drivers/mmc/host/rtsx_pci_sdmmc.c:448:2: error: implicit
declaration of function 'kzalloc'
[-Werror=implicit-function-declaration]
drivers/mmc/host/rtsx_pci_sdmmc.c:448:6: warning: assignment
makes pointer from integer without a cast [enabled by default]
drivers/mmc/host/rtsx_pci_sdmmc.c:472:2: error: implicit
declaration of function 'kfree'
[-Werror=implicit-function-declaration]

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21 16:07:54 +01:00
Wei WANG 38d324df75 mmc: rtsx: Configure SD_CFG2 register in sd_rw_multi
For Realtek card reader, internal regsiter SD_CFG2 should be configured
before transferring data.
The default value of SD_CFG2 is proper for writing data. But for reading
sequence, the timing is not good enough. So in some extreme circumstance,
card reader may sample the response data from the card as good even if
the data is wrong. And this will cause the bad consequence.
In the prior version, the value of this register has been calculated,
but forgotten to write back to the internal register.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-21 16:07:54 +01:00
Wei WANG 014483932b mmc: rtsx: Remove a duplicate command in sd_rw_multi
Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20 12:21:13 +01:00
Wei WANG ff984e57d3 mmc: Add realtek pcie sdmmc host driver
Realtek PCI-E SD/MMC card host driver is used to access SD/MMC card,
with the help of Realtek PCI-E card reader MFD driver.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-08 10:35:17 +01:00