Commit Graph

333 Commits

Author SHA1 Message Date
Tony Luck 25667d6754 Revert "[IA64] swiotlb abstraction (e.g. for Xen)"
This reverts commit 51099005ab.
2007-03-06 13:31:45 -08:00
Randy Dunlap 05fb6bf0b2 [PATCH] kernel-doc fixes for 2.6.20-git15 (non-drivers)
Fix kernel-doc warnings in 2.6.20-git15 (lib/, mm/, kernel/, include/).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 14:53:37 -08:00
Andrew Morton 96c62d51cc [PATCH] genalloc warning fixes
lib/genalloc.c: In function 'gen_pool_alloc':
lib/genalloc.c:151: warning: passing argument 2 of '__set_bit' from incompatible pointer type
lib/genalloc.c: In function 'gen_pool_free':
lib/genalloc.c:190: warning: passing argument 2 of '__clear_bit' from incompatible pointer type

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20 17:10:15 -08:00
Akinobu Mita 1df49008f4 [PATCH] fault injection: split up stacktrace filter Kconfig option
There is no prompt for CONFIG_STACKTRACE, so FAULT_INJECTION cannot be
selected without LOCKDEP enabled.  (found by Paolo 'Blaisorblade'
Giarrusso)

In order to fix such broken Kconfig dependency, this patch splits up the
stacktrace filter support for fault injection by new Kconfig option, which
enables to use fault injection on the architecture which doesn't have
general stacktrace support.

Cc: "Paolo 'Blaisorblade' Giarrusso" <blaisorblade@yahoo.it>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20 17:10:14 -08:00
Christoph Lameter 53b8a315b7 [PATCH] Convert highest_possible_processor_id to nr_cpu_ids
We frequently need the maximum number of possible processors in order to
allocate arrays for all processors.  So far this was done using
highest_possible_processor_id().  However, we do need the number of
processors not the highest id.  Moreover the number was so far dynamically
calculated on each invokation.  The number of possible processors does not
change when the system is running.  We can therefore calculate that number
once.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20 17:10:13 -08:00
Linus Torvalds 874ff01bd9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (25 commits)
  Documentation/kernel-docs.txt update.
  arch/cris: typo in KERN_INFO
  Storage class should be before const qualifier
  kernel/printk.c: comment fix
  update I/O sched Kconfig help texts - CFQ is now default, not AS.
  Remove duplicate listing of Cris arch from README
  kbuild: more doc. cleanups
  doc: make doc. for maxcpus= more visible
  drivers/net/eexpress.c: remove duplicate comment
  add a help text for BLK_DEV_GENERIC
  correct a dead URL in the IP_MULTICAST help text
  fix the BAYCOM_SER_HDX help text
  fix SCSI_SCAN_ASYNC help text
  trivial documentation patch for platform.txt
  Fix typos concerning hierarchy
  Fix comment typo "spin_lock_irqrestore".
  Fix misspellings of "agressive".
  drivers/scsi/a100u2w.c: trivial typo patch
  Correct trivial typo in log2.h.
  Remove useless FIND_FIRST_BIT() macro from cardbus.c.
  ...
2007-02-19 13:29:02 -08:00
Linus Torvalds 733abe4fff Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  PCI: Make PCI device numa-node attribute visible in sysfs
  PCI: add systems for automatic breadth-first device sorting
  PCI: PCI devices get assigned redundant IRQs
  PCI: Make CARDBUS_MEM_SIZE and CARDBUS_IO_SIZE boot options
  PCI: pci.txt fix __devexit() usage
  PCI/sysfs/kobject kernel-doc fixes
2007-02-19 12:59:55 -08:00
Robert P. J. Day d08df601a3 Various typo fixes.
Correct mis-spellings of "algorithm", "appear", "consistent" and
(shame, shame) "kernel".

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 19:07:33 +01:00
Randy Dunlap f95d882d81 PCI/sysfs/kobject kernel-doc fixes
Fix kernel-doc warnings in PCI, sysfs, and kobject files.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:30:10 -08:00
Martin Stoilov 1350770112 kobject: kobj->k_name verification fix
The function 'kobject_add' tries to verify the name of
a new kobject instance is properly set before continuing.
    if (!kobj->k_name)
        kobj->k_name = kobj->name;
    if (!kobj->k_name) {
        pr_debug("kobject attempted to be registered with no name!\n");
        WARN_ON(1);
        return -EINVAL;
    }
The statement:
    if (!kobj->k_name) {
        pr_debug("kobject attempted to be registered with no name!\n");
        WARN_ON(1);
        return -EINVAL;
    }
is useless the way it is right now, because it can never be true. I
think the
code was intended to be:
    if (!kobj->k_name)
        kobj->k_name = kobj->name;
    if (!*kobj->k_name) {
        pr_debug("kobject attempted to be registered with no name!\n");
        WARN_ON(1);
        return -EINVAL;
    }
because this would make sure the kobj->name buffer has something in it.
So the missing '*' is just a typo. Although, I would much prefer
expression like:
    if (*kobj->k_name == '\0') {
        pr_debug("kobject attempted to be registered with no name!\n");
        WARN_ON(1);
        return -EINVAL;
    }

because this would've made the intention clear, in this patch I just restore
the missing '*' without changing the coding style of the function.

Signed-off-by: Martin Stoilov <mstoilov@odesys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:19:17 -08:00
Ingo Molnar 82f67cd9fc [PATCH] Add debugging feature /proc/timer_stat
Add /proc/timer_stats support: debugging feature to profile timer expiration.
Both the starting site, process/PID and the expiration function is captured.
This allows the quick identification of timer event sources in a system.

Sample output:

# echo 1 > /proc/timer_stats
# cat /proc/timer_stats
Timer Stats Version: v0.1
Sample period: 4.010 s
  24,     0 swapper          hrtimer_stop_sched_tick (hrtimer_sched_tick)
  11,     0 swapper          sk_reset_timer (tcp_delack_timer)
   6,     0 swapper          hrtimer_stop_sched_tick (hrtimer_sched_tick)
   2,     1 swapper          queue_delayed_work_on (delayed_work_timer_fn)
  17,     0 swapper          hrtimer_restart_sched_tick (hrtimer_sched_tick)
   2,     1 swapper          queue_delayed_work_on (delayed_work_timer_fn)
   4,  2050 pcscd            do_nanosleep (hrtimer_wakeup)
   5,  4179 sshd             sk_reset_timer (tcp_write_timer)
   4,  2248 yum-updatesd     schedule_timeout (process_timeout)
  18,     0 swapper          hrtimer_restart_sched_tick (hrtimer_sched_tick)
   3,     0 swapper          sk_reset_timer (tcp_delack_timer)
   1,     1 swapper          neigh_table_init_no_netlink (neigh_periodic_timer)
   2,     1 swapper          e1000_up (e1000_watchdog)
   1,     1 init             schedule_timeout (process_timeout)
100 total events, 25.24 events/sec

[ cleanups and hrtimers support from Thomas Gleixner <tglx@linutronix.de> ]
[bunk@stusta.de: nr_entries can become static]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:59 -08:00
Frederik Deweerdt fb4d64e78c [PATCH] pci_iomap_regions() error handling fix
It appears that the pcim_iomap_regions() function doesn't get the error
handling right. It BUGs early at boot with a backtrace along the lines of:

ahci_init
pci_register_driver
driver_register
[...]
ahci_init_one
pcim_iomap_region
pcim_iounmap

The following patch allows me to boot. Only the if(mask..) continue;
part fixes the problem actually, the gotos where changed so that we
don't try to unmap something we couldn't map anyway.

Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-16 08:13:55 -08:00
Andrew Morton be6b026785 [PATCH] swiotlb uninlinings
Optimise swiotlb.c for size.

   text    data     bss     dec     hex filename
   5009      89      64    5162    142a lib/swiotlb.o-before
   4666      89      64    4819    12d3 lib/swiotlb.o-after

For some reason my gcc (4.0.2) doesn't want to tailcall these things.

swiotlb_sync_sg_for_device:
	pushq	%rbp	#
	movl	$1, %r8d	#,
	movq	%rsp, %rbp	#,
	call	swiotlb_sync_sg	#
	leave
	ret
	.size	swiotlb_sync_sg_for_device, .-swiotlb_sync_sg_for_device
	.section	.text.swiotlb_sync_sg_for_cpu,"ax",@progbits
.globl swiotlb_sync_sg_for_cpu
	.type	swiotlb_sync_sg_for_cpu, @function
swiotlb_sync_sg_for_cpu:
	pushq	%rbp	#
	xorl	%r8d, %r8d	#
	movq	%rsp, %rbp	#,
	call	swiotlb_sync_sg	#
	leave
	ret

Cc: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:29 -08:00
David Woodhouse a304e1b828 [PATCH] Debug shared irqs
Drivers registering IRQ handlers with SA_SHIRQ really ought to be able to
handle an interrupt happening before request_irq() returns.  They also
ought to be able to handle an interrupt happening during the start of their
call to free_irq().  Let's test that hypothesis....

[bunk@stusta.de: Kconfig fixes]
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:28 -08:00
Martin Peschke ea6f3281a1 [PATCH] scnprintf(): fix a comment
The return value of scnprintf() never exceeds @size.

Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:28 -08:00
Al Viro 5ea8176994 [PATCH] sort the devres mess out
* Split the implementation-agnostic stuff in separate files.
* Make sure that targets using non-default request_irq() pull
  kernel/irq/devres.o
* Introduce new symbols (HAS_IOPORT and HAS_IOMEM) defaulting to positive;
  allow architectures to turn them off (we needed these symbols anyway for
  dependencies of quite a few drivers).
* protect the ioport-related parts of lib/devres.o with CONFIG_HAS_IOPORT.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 11:18:07 -08:00
Robert P. J. Day b9b2a70037 [PATCH] Remove references to obsolete kernel config option DEBUG_RWSEMS
Remove the few references to the obsolete kernel config option
DEBUG_RWSEMS.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 11:18:06 -08:00
Kirill Korotaev e3e8a75d2a [PATCH] Extract and use wake_up_klogd()
Remove hack with printing space to wake up klogd.  Use explicit
wake_up_klogd().

See earlier discussion
http://groups.google.com/group/fa.linux.kernel/browse_frm/thread/75f496668409f58d/1a8f28983a51e1ff?lnk=st&q=wake_up_klogd+group%3Afa.linux.kernel&rnum=2#1a8f28983a51e1ff

Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:34 -08:00
Kirill Korotaev cefc8be824 [PATCH] Consolidate bust_spinlocks()
Part of long forgotten patch
http://groups.google.com/group/fa.linux.kernel/msg/e98e941ce1cf29f6?dmode=source
Since then, m32r grabbed two copies.

Leave s390 copy because of important absence of CONFIG_VT, but remove
references to non-existent timerlist_lock.  ia64 also loses timerlist_lock.

Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:34 -08:00
Robert P. J. Day 72fd4a35a8 [PATCH] Numerous fixes to kernel-doc info in source files.
A variety of (mostly) innocuous fixes to the embedded kernel-doc content in
source files, including:

  * make multi-line initial descriptions single line
  * denote some function names, constants and structs as such
  * change erroneous opening '/*' to '/**' in a few places
  * reword some text for clarity

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:32 -08:00
Tejun Heo ca29978852 iomap: iomap should be in obj-y not in lib-y
devres change moved iomap.o from obj-$(CONFIG_GENERIC_IOMAP) to lib-y
making it not linked if no in-kernel driver uses it.  Fix it.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09 17:39:37 -05:00
Tejun Heo d24bbbf251 devres: implement pcim_iomap_regions()
Implement pcim_iomap_regions().  This function takes mask of BARs to
request and iomap.  No BAR should have length of zero.  BARs are
iomapped using pcim_iomap_table().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09 17:39:37 -05:00
Tejun Heo 9ac7849e35 devres: device resource management
Implement device resource management, in short, devres.  A device
driver can allocate arbirary size of devres data which is associated
with a release function.  On driver detach, release function is
invoked on the devres data, then, devres data is freed.

devreses are typed by associated release functions.  Some devreses are
better represented by single instance of the type while others need
multiple instances sharing the same release function.  Both usages are
supported.

devreses can be grouped using devres group such that a device driver
can easily release acquired resources halfway through initialization
or selectively release resources (e.g. resources for port 1 out of 4
ports).

This patch adds devres core including documentation and the following
managed interfaces.

* alloc/free	: devm_kzalloc(), devm_kzfree()
* IO region	: devm_request_region(), devm_release_region()
* IRQ		: devm_request_irq(), devm_free_irq()
* DMA		: dmam_alloc_coherent(), dmam_free_coherent(),
		  dmam_declare_coherent_memory(), dmam_pool_create(),
		  dmam_pool_destroy()
* PCI		: pcim_enable_device(), pcim_pin_device(), pci_is_managed()
* iomap		: devm_ioport_map(), devm_ioport_unmap(), devm_ioremap(),
		  devm_ioremap_nocache(), devm_iounmap(), pcim_iomap_table(),
		  pcim_iomap(), pcim_iounmap()

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09 17:39:36 -05:00
Eric W. Biederman b592fcfe7f sysfs: Shadow directory support
The problem.  When implementing a network namespace I need to be able
to have multiple network devices with the same name.  Currently this
is a problem for /sys/class/net/*. 

What I want is a separate /sys/class/net directory in sysfs for each
network namespace, and I want to name each of them /sys/class/net.

I looked and the VFS actually allows that.  All that is needed is
for /sys/class/net to implement a follow link method to redirect
lookups to the real directory you want. 

Implementing a follow link method that is sensitive to the current
network namespace turns out to be 3 lines of code so it looks like a
clean approach.  Modifying sysfs so it doesn't get in my was is a bit
trickier. 

I am calling the concept of multiple directories all at the same path
in the filesystem shadow directories.  With the directory entry really
at that location the shadow master. 

The following patch modifies sysfs so it can handle a directory
structure slightly different from the kobject tree so I can implement
the shadow directories for handling /sys/class/net/.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:14 -08:00
Mariusz Kozlowski b067db49e1 kobject: kobject_put cleanup
This patch removes redundant argument checks for kobject_put().

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:13 -08:00
Cornelia Huck c744aeae9d driver core: Allow device_move(dev, NULL).
If we allow NULL as the new parent in device_move(), we need to make sure
that the device is placed into the same place as it would if it was
newly registered:

- Consider the device virtual tree. In order to be able to reuse code,
  setup_parent() has been tweaked a bit.
- kobject_move() can fall back to the kset's kobject.
- sysfs_move_dir() uses the sysfs root dir as fallback.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:11 -08:00
Greg Kroah-Hartman 31b9025aa0 Kobject: make kobject apis more robust in handling NULL pointers
It should be ok to pass in NULL for some kobject functions, so add error
checking for all exported kobject functions to be more robust.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:10 -08:00
Jan Beulich 51099005ab [IA64] swiotlb abstraction (e.g. for Xen)
Add abstraction so that the file can be used by environments other than IA64
and EM64T, namely for Xen.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-02-05 18:53:04 -08:00
Jan Beulich 563aaf064f [IA64] swiotlb cleanup
- add proper __init decoration to swiotlb's init code (and the code calling
  it, where not already the case)

- replace uses of 'unsigned long' with dma_addr_t where appropriate

- do miscellaneous simplicfication and cleanup

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-02-05 18:51:25 -08:00
Jan Beulich 93fbff63e6 [IA64] make swiotlb use bus_to_virt/virt_to_bus
Convert all phys_to_virt/virt_to_phys uses to bus_to_virt/virt_to_bus, as is
what is meant and what is needed in (at least) some virtualized environments
like Xen.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-02-05 18:49:45 -08:00
Jan Beulich cde14bbfb3 [IA64] swiotlb bug fixes
This patch fixes
- marking I-cache clean of pages DMAed to now only done for IA64
- broken multiple inclusion in include/asm-x86_64/swiotlb.h
- missing call to mark_clean in swiotlb_sync_sg()
- a (perhaps only theoretical) issue in swiotlb_dma_supported() when
io_tlb_end is exactly at the end of memory

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-02-05 18:46:40 -08:00
Aneesh Kumar K.V 542cfce6f3 kobject: kobject_uevent() returns manageable value
Since kobject_uevent() function does not return an integer value to
indicate if its operation was completed with success or not, it is worth
changing it in order to report a proper status (success or error) instead
of returning void.

[randy.dunlap@oracle.com: Fix inline kobject functions]
Cc: Mauricio Lin <mauriciolin@gmail.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20 10:56:44 -08:00
Venkatesh Pallipadi f334b60b43 kref refcnt and false positives
With WARN_ON addition to kobject_init()
[ http://kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19/2.6.19-mm1/dont-use/broken-out/gregkh-driver-kobject-warn.patch ]

I started seeing following WARNING on CPU offline followed by online on my
x86_64 system.

WARNING at lib/kobject.c:172 kobject_init()

Call Trace:
 [<ffffffff8020ab45>] dump_trace+0xaa/0x3ef
 [<ffffffff8020aec4>] show_trace+0x3a/0x50
 [<ffffffff8020b0f6>] dump_stack+0x15/0x17
 [<ffffffff80350abc>] kobject_init+0x3f/0x8a
 [<ffffffff80350be1>] kobject_register+0x1a/0x3e
 [<ffffffff803bbd89>] sysdev_register+0x5b/0xf9
 [<ffffffff80211d0b>] mce_create_device+0x77/0xf4
 [<ffffffff80211dc2>] mce_cpu_callback+0x3a/0xe5
 [<ffffffff805632fd>] notifier_call_chain+0x26/0x3b
 [<ffffffff8023f6f3>] raw_notifier_call_chain+0x9/0xb
 [<ffffffff802519bf>] _cpu_up+0xb4/0xdc
 [<ffffffff80251a12>] cpu_up+0x2b/0x42
 [<ffffffff803bef00>] store_online+0x4a/0x72
 [<ffffffff803bb6ce>] sysdev_store+0x24/0x26
 [<ffffffff802baaa2>] sysfs_write_file+0xcf/0xfc
 [<ffffffff8027fc6f>] vfs_write+0xae/0x154
 [<ffffffff80280418>] sys_write+0x47/0x6f
 [<ffffffff8020963e>] system_call+0x7e/0x83
DWARF2 unwinder stuck at system_call+0x7e/0x83
Leftover inexact backtrace:

This is a false positive as mce.c is unregistering/registering sysfs
interfaces cleanly on hotplug.

kref_put() and conditional decrement of refcnt seems to be the root cause
for this and the patch below resolves the issue for me.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20 10:56:43 -08:00
Linus Torvalds d1526e2cda Remove stack unwinder for now
It has caused more problems than it ever really solved, and is
apparently not getting cleaned up and fixed.  We can put it back when
it's stable and isn't likely to make warning or bug events worse.

In the meantime, enable frame pointers for more readable stack traces.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-15 08:47:51 -08:00
Al Viro ee36c2bf8e [PATCH] uml problems with linux/io.h
Remove useless includes of linux/io.h, don't even try to build iomap_copy
on uml (it doesn't have readb() et.al., so...)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:05:52 -08:00
Eric Dumazet 6a2d7a955d [PATCH] SLAB: use a multiply instead of a divide in obj_to_index()
When some objects are allocated by one CPU but freed by another CPU we can
consume lot of cycles doing divides in obj_to_index().

(Typical load on a dual processor machine where network interrupts are
handled by one particular CPU (allocating skbufs), and the other CPU is
running the application (consuming and freeing skbufs))

Here on one production server (dual-core AMD Opteron 285), I noticed this
divide took 1.20 % of CPU_CLK_UNHALTED events in kernel.  But Opteron are
quite modern cpus and the divide is much more expensive on oldest
architectures :

On a 200 MHz sparcv9 machine, the division takes 64 cycles instead of 1
cycle for a multiply.

Doing some math, we can use a reciprocal multiplication instead of a divide.

If we want to compute V = (A / B)  (A and B being u32 quantities)
we can instead use :

V = ((u64)A * RECIPROCAL(B)) >> 32 ;

where RECIPROCAL(B) is precalculated to ((1LL << 32) + (B - 1)) / B

Note :

I wrote pure C code for clarity. gcc output for i386 is not optimal but
acceptable :

mull   0x14(%ebx)
mov    %edx,%eax // part of the >> 32
xor     %edx,%edx // useless
mov    %eax,(%esp) // could be avoided
mov    %edx,0x4(%esp) // useless
mov    (%esp),%ebx

[akpm@osdl.org: small cleanups]
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:05:49 -08:00
Dave Jones 86327d19f7 Fix typo in new debug options.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12 20:16:36 +01:00
Cal Peake 0258736a0a [PATCH] add MODULE_* attributes to bit reversal library
Add MODULE_* attributes to the new bit reversal library. Most notably
MODULE_LICENSE which prevents superfluous kernel tainting.

Signed-off-by: Cal Peake <cp@absolutedigital.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 10:07:52 -08:00
Don Mullis bf4735a46a [PATCH] Kconfig refactoring for better menu nesting
Refactor Kconfig content to maximize nesting of menus by menuconfig and
xconfig.

Tested by simultaneously running `make xconfig` with and without
patch, and comparing displays.

Signed-off-by: Don Mullis <dwm@meer.net>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:55:39 -08:00
Don Mullis f1729c28a3 [PATCH] fault-injection: optimize and simplify should_fail()
Trivial optimization and simplification of should_fail().

Do cheaper disqualification tests first (performance gain not quantified).
Simplify logic; eliminate goto.

Signed-off-by: Don Mullis <dwm@meer.net>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:03 -08:00
Don Mullis a124c28ef8 [PATCH] fault-injection: Clamp debugfs stacktrace-depth to MAX_STACK_TRACE_DEPTH
Clamp /debug/fail*/stacktrace-depth to MAX_STACK_TRACE_DEPTH.  Ensures that a
read of /debug/fail*/stacktrace-depth always returns a truthful answer.

Signed-off-by: Don Mullis <dwm@meer.net>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:03 -08:00
Don Mullis 08b3df2d16 [PATCH] fault-injection: Use bool-true-false throughout
Use bool-true-false throughout.

Signed-off-by: Don Mullis <dwm@meer.net>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:03 -08:00
Andrew Morton 83ba254688 [PATCH] fault-injection: stacktrace filtering kconfig fix
`select' doesn't work very well.  With alpha `make allmodconfig' we end up
with CONFIG_STACKTRACE enabled, so we end up with undefined save_stacktrace()
at link time.

Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Don Mullis <dwm@meer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:03 -08:00
Andrew Morton 1ab8509a31 [PATCH] fault-injection Kconfig cleanup
- Fix some spelling and grammatical errors

- Make the Kconfig menu more conventional.  First you select
  fault-injection, then under that you select particular clients of it.

Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Don Mullis <dwm@meer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:03 -08:00
Akinobu Mita 329409aeda [PATCH] fault injection: stacktrace filtering
This patch provides stacktrace filtering feature.

The stacktrace filter allows failing only for the caller you are
interested in.

For example someone may want to inject kmalloc() failures into
only e100 module. they want to inject not only direct kmalloc() call,
but also indirect allocation, too.

- e100_poll --> netif_receive_skb --> packet_rcv_spkt --> skb_clone
  --> kmem_cache_alloc

This patch enables to detect function calls like this by stacktrace
and inject failures. The script Documentaion/fault-injection/failmodule.sh
helps it.

The range of text section of loaded e100 is expected to be
[/sys/module/e100/sections/.text, /sys/module/e100/sections/.exit.text)

So failmodule.sh stores these values into /debug/failslab/address-start
and /debug/failslab/address-end. The maximum stacktrace depth is specified
by /debug/failslab/stacktrace-depth.

Please see the example that demonstrates how to inject slab allocation
failures only for a specific module
in Documentation/fault-injection/fault-injection.txt

[dwm@meer.net: reject failure if any caller lies within specified range]
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Don Mullis <dwm@meer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:03 -08:00
Akinobu Mita f4f154fd92 [PATCH] fault injection: process filtering for fault-injection capabilities
This patch provides process filtering feature.
The process filter allows failing only permitted processes
by /proc/<pid>/make-it-fail

Please see the example that demostrates how to inject slab allocation
failures into module init/cleanup code
in Documentation/fault-injection/fault-injection.txt

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:02 -08:00
Akinobu Mita c17bb49517 [PATCH] fault-injection capability for disk IO
This patch provides fault-injection capability for disk IO.

Boot option:

fail_make_request=<probability>,<interval>,<space>,<times>

	<interval> -- specifies the interval of failures.

	<probability> -- specifies how often it should fail in percent.

	<space> -- specifies the size of free space where disk IO can be issued
		   safely in bytes.

	<times> -- specifies how many times failures may happen at most.

Debugfs:

/debug/fail_make_request/interval
/debug/fail_make_request/probability
/debug/fail_make_request/specifies
/debug/fail_make_request/times

Example:

	fail_make_request=10,100,0,-1
	echo 1 > /sys/blocks/hda/hda1/make-it-fail

generic_make_request() on /dev/hda1 fails once per 10 times.

Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:02 -08:00
Akinobu Mita 933e312e73 [PATCH] fault-injection capability for alloc_pages()
This patch provides fault-injection capability for alloc_pages()

Boot option:

fail_page_alloc=<interval>,<probability>,<space>,<times>

	<interval> -- specifies the interval of failures.

	<probability> -- specifies how often it should fail in percent.

	<space> -- specifies the size of free space where memory can be
		   allocated safely in pages.

	<times> -- specifies how many times failures may happen at most.

Debugfs:

/debug/fail_page_alloc/interval
/debug/fail_page_alloc/probability
/debug/fail_page_alloc/specifies
/debug/fail_page_alloc/times
/debug/fail_page_alloc/ignore-gfp-highmem
/debug/fail_page_alloc/ignore-gfp-wait

Example:

	fail_page_alloc=10,100,0,-1

The page allocation (alloc_pages(), ...) fails once per 10 times.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:02 -08:00
Akinobu Mita 8a8b6502fb [PATCH] fault-injection capability for kmalloc
This patch provides fault-injection capability for kmalloc.

Boot option:

failslab=<interval>,<probability>,<space>,<times>

	<interval> -- specifies the interval of failures.

	<probability> -- specifies how often it should fail in percent.

	<space> -- specifies the size of free space where memory can be
		   allocated safely in bytes.

	<times> -- specifies how many times failures may happen at most.

Debugfs:

/debug/failslab/interval
/debug/failslab/probability
/debug/failslab/specifies
/debug/failslab/times
/debug/failslab/ignore-gfp-highmem
/debug/failslab/ignore-gfp-wait

Example:

	failslab=10,100,0,-1

slab allocation (kmalloc(), kmem_cache_alloc(),..) fails once per 10 times.

Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:02 -08:00
Akinobu Mita 6ff1cb355e [PATCH] fault-injection capabilities infrastructure
This patch provides base functions implement to fault-injection
capabilities.

- The function should_fail() is taken from failmalloc-1.0
  (http://www.nongnu.org/failmalloc/)

[akpm@osdl.org: cleanups, comments, add __init]
Cc: <okuji@enbug.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Don Mullis <dwm@meer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:02 -08:00