Commit Graph

28 Commits

Author SHA1 Message Date
Rafael J. Wysocki 464ed18ebd PM: Eliminate CONFIG_PM_RUNTIME
Having switched over all of the users of CONFIG_PM_RUNTIME to use
CONFIG_PM directly, turn the latter into a user-selectable option
and drop the former entirely from the tree.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
2014-12-19 22:55:06 +01:00
Geert Uytterhoeven 6e3a4b191e ARM: shmobile: marzen_defconfig: Enable missing hardware support
Based on the DTS

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-17 09:37:44 +09:00
Kuninori Morimoto edcde600a0 ARM: shmobile: marzen: enable CONFIG_DEVTMPFS in defconfig
This reverts commit 41307133da
("ARM: shmobile: marzen: Do not enable CONFIG_DEVTMPFS defconfig").

DEVTMPFS is needed for udev.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
[horms+renesas@verge.net.au: Added subject of reverted patch to changelog]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04 10:26:02 +09:00
Olof Johansson acdcbd6331 Renesas ARM based SoC board updates for v3.14
* Global
   - Kconfig: Mention Renesas ARM SoCs instead of SH-Mobile
 
 * r7s72100 SoC (RZ/A1H) based Genmai Board
   - Add Multiplatform support
   - Add Reference DT
 
 * r8a7791 (R-Car M2) based Koelsch board
   - Add pinctrl_register_mappings() for Koelsch
   - Hook up SW30-SW36 on Koelsch
   - Mark GPIO keys as wake-up sources
   - Use ->init_late()
   - Add Multiplatform support
   - Set .debounce_interval for GPIO keys
   - Add SW2 to GPIO keys
   - Add Led 6, 7 and 8 support
   - Add reference DT
   - Enable PFC/GPIO
 
 * r8a7790 (R-Car H2) based Lager board
   - Add gpio/fixed regulator for SDHI
   - Add SPI FLASH support on QSPI
   - Mark GPIO keys as wake-up sources
   - Use ->init_late()
   - Set .debounce_interval for GPIO keys
 
 * r8a7778 (R-Car M1) based Bock-W board
   - bockw: remove unused RSND_SSI_CLK_FROM_ADG
   - Set .debounce_interval for GPIO keys
   - Correct FPGA ioremap area
   - Use regulator for MMCIF
 
 * r8a7740 (R-Mobile A1) based Armadillo board
   - Correct FSI address size
 
 * sh7374 (SH-Mobile AP4) based Mackerel board
   - Use pinconf API to configure pin pull-down
   - clk_round_rate() can return a zero to indicate an error
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSt5cHAAoJENfPZGlqN0++xIoP/jBunLyY+xAZ+06gukAdKEw4
 hLoUH55GsvpaL5cuDT+LSXWafIol4A/wvME5sZJsKoCHRnDqQYKvyE7hDLIlvLRI
 KvcmFvdUcN6plbD/wz/SPzur/Lq3+DcX4ep8pmI7OUXupYWomibwylv/5UgY++PN
 Uymmre4CiHK7/wzWOyS79ujcGzdwk4o1ari5P2lC4fUlVM7jZ7DQswglo+jGxscw
 CXHtEfqto4NEh2+05sAGdmRHwb3xwOndPYwHaFWy+X6uce/BZXsgDipWihHI5ZKr
 FT+TemFlYwXc2In2F/E4T7aXqNDXSjEcX/x2/VHS5W2EoWbSk+Mz6zlFZduAv4oG
 c35AQjHMktlo6voZm0L4WgH0JYT4dyu6DJG3mo7adRyYKvjv/OC48wt4jhYa0LGZ
 XLcYBoaK1zqpG2M6ZIv138a9krGtkfSCy/Pt7YQ4WpA8CQyJlYqaoW9Yrpkhw13b
 OcO22myGbjMnxTwpqS9rwDPnNR2PjG9ExDHmO3x4k+zsLqyJHxzv6ikKJWl0eiUF
 JUv/mzxiaYsOBiMTYYuueNYegzhzGiW8jzp+j6E3WXTPxwCP2It8/31aBfyuaKcG
 B807//VKcHulPONe3emBK7I2KzsJ6UOUs7iHuqrdwoglQKqMC0iyy2/ZFXbu7JJU
 cMlHObCNFOGPZxKGsYXG
 =5zhn
 -----END PGP SIGNATURE-----

Merge tag 'renesas-boards-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

From Simon Horman:
Renesas ARM based SoC board updates for v3.14

* Global
  - Kconfig: Mention Renesas ARM SoCs instead of SH-Mobile

* r7s72100 SoC (RZ/A1H) based Genmai Board
  - Add Multiplatform support
  - Add Reference DT

* r8a7791 (R-Car M2) based Koelsch board
  - Add pinctrl_register_mappings() for Koelsch
  - Hook up SW30-SW36 on Koelsch
  - Mark GPIO keys as wake-up sources
  - Use ->init_late()
  - Add Multiplatform support
  - Set .debounce_interval for GPIO keys
  - Add SW2 to GPIO keys
  - Add Led 6, 7 and 8 support
  - Add reference DT
  - Enable PFC/GPIO

* r8a7790 (R-Car H2) based Lager board
  - Add gpio/fixed regulator for SDHI
  - Add SPI FLASH support on QSPI
  - Mark GPIO keys as wake-up sources
  - Use ->init_late()
  - Set .debounce_interval for GPIO keys

* r8a7778 (R-Car M1) based Bock-W board
  - bockw: remove unused RSND_SSI_CLK_FROM_ADG
  - Set .debounce_interval for GPIO keys
  - Correct FPGA ioremap area
  - Use regulator for MMCIF

* r8a7740 (R-Mobile A1) based Armadillo board
  - Correct FSI address size

* sh7374 (SH-Mobile AP4) based Mackerel board
  - Use pinconf API to configure pin pull-down
  - clk_round_rate() can return a zero to indicate an error

* tag 'renesas-boards-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (75 commits)
  ARM: shmobile: lager: add gpio/fixed regulator for SDHI
  ARM: shmobile: bockw: remove unused RSND_SSI_CLK_FROM_ADG
  ARM: shmobile: armadillo: fixup FSI address size
  ARM: Kconfig: Mention Renesas ARM SoCs instead of SH-Mobile
  ARM: shmobile: mackerel: Use pinconf API to configure pin pull-down
  ARM: shmobile: Lager:add SPI FLASH support on QSPI
  ARM: shmobile: mackerel: clk_round_rate() can return a zero to indicate an error
  ARM: shmobile: Add pinctrl_register_mappings() for Koelsch
  ARM: shmobile: Use ->init_late() on Lager
  ARM: shmobile: Hook up SW30-SW36 on Koelsch
  ARM: shmobile: koelsch: mark GPIO keys as wake-up sources
  ARM: shmobile: Use ->init_late() on Koelsch
  ARM: shmobile: lager: mark GPIO keys as wake-up sources
  ARM: shmobile: r7s72100 Genmai Multiplatform
  ARM: shmobile: r7s72100 Genmai DT reference C bits
  ARM: shmobile: r7s72100 Genmai DT reference DTS bits
  ARM: shmobile: Initial r8a7791 and Koelsch multiplatform support
  ARM: shmobile: koelsch: set .debounce_interval
  ARM: shmobile: lager: set .debounce_interval
  ARM: shmobile: bockw: add pin pull-up setting for SDHI
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-29 13:15:03 -08:00
Laurent Pinchart bf98c1eac1 ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY
SH-Mobile platforms are transitioning from non-multiplatform to
multiplatform kernel. A new ARCH_SHMOBILE_MULTI configuration symbol has
been created to group all multiplatform-enabled SH-Mobile SoCs. The
existing ARCH_SHMOBILE configuration symbol groups SoCs that haven't
been converted yet.

This arrangement works fine for the arch/ code, but lots of drivers
needed on both ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI depend on
ARCH_SHMOBILE only. In order to avoid changing them, rename
ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY, and create a new boolean
ARCH_SHMOBILE configuration symbol that is selected by both
ARCH_SHMOBILE_LEGACY and ARCH_SHMOBILE_MULTI.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10 16:52:18 +09:00
Sergei Shtylyov 96c4f31f95 ARM: shmobile: marzen: enable HPB-DMAC in defconfig
Enable HPB-DMAC driver in 'marzen_defconfig'.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-24 15:13:42 +09:00
Simon Horman f3a3d2cfb7 ARM: shmobile: marzen: Do not enable CONFIG_SMC911X in defconfig
CONFIG_SMC911X is not needed by marzen.
It appears to have been accidently enabled as well
as CONFIG_SMSC911X which is needed by marzen.

Signed-off-by: Simon Horman <horms@verge.net.au>
2013-11-24 15:13:42 +09:00
Simon Horman d4df4b2716 ARM: shmobile: marzen: Enable CONFIG_PACKET in defconfig
CONFIG_PACKET is required for the ISC dhcpd daemon function.
This change brings the marzen defconfig into line with
other shmobile defconfigs.

Signed-off-by: Simon Horman <horms@verge.net.au>
2013-11-24 15:13:42 +09:00
Simon Horman 41307133da ARM: shmobile: marzen: Do not enable CONFIG_DEVTMPFS defconfig
This change brings the marzen defconfig into line with
other shmobile defconfigs.

Signed-off-by: Simon Horman <horms@verge.net.au>
2013-11-24 15:13:42 +09:00
Simon Horman 8f1c357329 ARM: shmobile: marzen: Enable CONFIG_VFP in defconfig
CONFIG_VFP is required to boot into a Debian armhf user-space.
This change brings the marzen defconfig into line with
other shmobile defconfigs.

Signed-off-by: Simon Horman <horms@verge.net.au>
2013-11-24 15:13:41 +09:00
Simon Horman 96ffa47649 ARM: shmobile: marzen: Do not disable CONFIG_INOTIFY_USER in defconfig
CONFIG_INOTIFY_USER is required for udev to function.
This change brings the marzen defconfig into line with
other shmobile defconfigs.

Signed-off-by: Simon Horman <horms@verge.net.au>
2013-11-24 15:13:41 +09:00
Simon Horman 7a14b78831 ARM: shmobile: marzen: Do not set command line in defconfig
As a set towards moving shmobile towards multi-platform
the kernel command line should be set in the DTB rather than
in the kernel config.

marzen already has the command line present in its DTS file
but it was being overrirden by the kernel config.

Signed-off-by: Simon Horman <horms@verge.net.au>
2013-11-24 15:13:41 +09:00
Laurent Pinchart 7525e87b46 ARM: shmobile: marzen: Select DRM_RCAR_DU in defconfig
A R-Car DU DRM device is registered for the Marzen board, select the
corresponding driver in its defconfig.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-20 17:46:14 -07:00
Linus Torvalds 44598f98b9 ARM: SoC board updates for 3.12
Board updates for 3.12. Again, a bit of domain overlap with SoC and DT branches,
 but most of this is around legacy code and board support. We've found that
 platform maintainers have a hard time separating all of these out and might
 move towards fewer branches for next release.
 
 - Removal of a number of Marvell Kirkwood board files, since contents
   is now common and mostly configured via DT.
 - Device-tree updates for Marvell Dove, including irqchip and clocksource
   setup.
 - Defconfig updates. Gotta go somewhere. One new one for Renesas Lager.
 - New backlight drivers for backlights used on Renesas shmobile platforms.
 - Removal of Renesas leds driver.
 - Shuffling of some of the new Broadcom platforms to give room for others in
   the same mach directory. More in 2.13.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKhrfAAoJEIwa5zzehBx3OOAQAJCWhoYaHvWmyAf+xCOQNpX2
 YgAngENW04VpHFOyn6BtoGv6+5JypdB2TmK3GHHlVJd1Im5mD1wgm8hAfgyV8lQ4
 UeJULdA2HZAstKeTirO65BIyUb5QIrWakF24ccfIfg2xeScM8FV0m8cmzeo3fYAf
 DmmeoSCmvTdu/cDWBNlsQZ/as8qCQwyF+5kZg+SMl1btA1Publu2I5lDE02TH46d
 sc5mN+ihw0JG62EJV7pov6uVyeFLExoTbrNfQZ4rixmKkMDS/jq5ZbBS5c0i8ULF
 s1UMSZtYTcUO9rAPv3+MOIc7fq7nKo9lLuwMrA1HHUEDJ2BEi8DIp99F+ZYm/MSL
 WpVxYNwOobPcMJBYGR2fy4GgpIyWB285GgrBUxcq7t0Xi4uBbptwjLhDE4d7LREV
 8guW251R+OEVPYcwFctsubnox0MViyC3CQ1FaAAdtTjpSKomlhk/yaxaQ9nGrxls
 QCZgXHWm4Ir3QYv8XfOn0X9vdP81EnX11SiwtrRSJ71QMs814nB8NdPDqU4VHsw8
 exKmqjq/Lt+F9Kpxn/FevNNuYOdefZNQi00yl3ERchdIGdvRwE/0yA0D69mpwIVr
 E41UwvH3g43vazCo2PMdWPWuFlpGMR3iZ4pXnDLH/w33ppfJWfokYwKSRQ/mu/MN
 LMjkwoZn1X+fZzNSh9/G
 =EGua
 -----END PGP SIGNATURE-----

Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC board updates from Olof Johansson:
 "Board updates for 3.12.  Again, a bit of domain overlap with SoC and
  DT branches, but most of this is around legacy code and board support.
  We've found that platform maintainers have a hard time separating all
  of these out and might move towards fewer branches for next release.

   - Removal of a number of Marvell Kirkwood board files, since contents
     is now common and mostly configured via DT.
   - Device-tree updates for Marvell Dove, including irqchip and
     clocksource setup.
   - Defconfig updates.  Gotta go somewhere.  One new one for Renesas
     Lager.
   - New backlight drivers for backlights used on Renesas shmobile
     platforms.
   - Removal of Renesas leds driver.
   - Shuffling of some of the new Broadcom platforms to give room for
     others in the same mach directory.  More in 3.13"

* tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits)
  mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_event
  mmc: sdhci-bcm-kona: Remove unneeded version.h inclusion
  ARM: bcm: Make secure API call optional
  ARM: DT: binding fixup to align with vendor-prefixes.txt (drivers)
  ARM: mmc: fix NONREMOVABLE test in sdhci-bcm-kona
  ARM: bcm: Rename board_bcm
  mmc: sdhci-bcm-kona: make linker-section warning go away
  ARM: tegra: defconfig updates
  ARM: dove: add initial DT file for Globalscale D2Plug
  ARM: dove: add GPIO IR receiver node to SolidRun CuBox
  ARM: dove: add common pinmux functions to DT
  ARM: dove: add cpu device tree node
  ARM: dove: update dove_defconfig with SI5351, PCI, and xHCI
  arch/arm/mach-kirkwood: Avoid using ARRAY_AND_SIZE(e) as a function argument
  ARM: kirkwood: fix DT building and update defconfig
  ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code
  ARM: configs: disable DEBUG_LL in bcm_defconfig
  ARM: bcm281xx: Board specific reboot code
  ARM bcm281xx: Turn on socket & network support.
  ARM: bcm281xx: Turn on L2 cache.
  ...
2013-09-06 13:34:43 -07:00
Vladimir Barinov e0c332c671 [media] ARM: shmobile: Marzen: enable VIN and ADV7180 in defconfig
Add the VIN and ADV7180 drivers to 'marzen_defconfig'.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-25 07:34:52 -03:00
Simon Horman 8c167a825d ARM: shmobile: marzen: Enable ARM_APPENDED_DTB in defconfig
"ARM: shmobile: marzen: Switch to DT_MACHINE_START" moves marzen
over to use DT_MACHINE_START, however, the prevalent boot loader
does not support booting with a separate dtb. Thus, it makes
sense to use ARM_APPENDED_DTB by default.

This is consistent with other shmobile defconfigs.

Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-30 13:28:55 +09:00
Simon Horman f90037cebb ARM: shmobile: marzen: defconfig: enable GPIO LEDs driver
This enables the code added to the marzen board in
"ARM: shmobile: marzen: Add GPIO LEDs".

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-27 20:01:26 +09:00
Simon Horman 9159c84f9e ARM: shmobile: marzen: defconfig: add GPIO RCAR driver support
This enables the driver added in "gpio: Renesas R-Car GPIO driver V3"

Cc: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-27 20:01:19 +09:00
Vladimir Barinov db30abdf3c ARM: mach-shmobile: marzen: add SATA support
Add SATA support to marzen_defconfig.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-14 10:28:07 +01:00
Arnd Bergmann bb57d4e322 ARM: shmobile: fix defconfig warning on CONFIG_USB
A recent update to the marzen_defconfig introduced a
duplicate CONFIG_USB=y line. This removes one of the
two.

arch/arm/configs/marzen_defconfig:86:warning: override: reassigning to symbol USB

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Cc: linux-sh@vger.kernel.org
2013-02-14 15:04:35 +01:00
Kuninori Morimoto ac7c4ea037 ARM: shmobile: marzen: add USB OHCI driver support
This patch supports CN21/CN22 USB 1.x (port 0/1/2),
and enable input event on defconfig

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2012-11-08 17:52:04 +09:00
Kuninori Morimoto 94e1f7fbe0 ARM: shmobile: marzen: add USB EHCI driver support
This patch supports CN21/CN22 USB 2.0 (port 0/1/2),
and enable USB momery on defconfig

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2012-11-08 17:52:03 +09:00
Kuninori Morimoto b5ce635d45 ARM: shmobile: marzen: add USB phy support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2012-11-08 17:52:03 +09:00
Kuninori Morimoto b82573e18b ARM: shmobile: marzen: add HSPI support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2012-10-30 15:25:51 +08:00
Linus Torvalds 84424026c0 ARM: soc: defconfig updates
This might be the last time we do a standalone defconfig branch,
 since we now prefer to get them with the rest of the subarch updates
 instead. These add a handful of useful options on various platforms,
 enable new boards and SoCs, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO4QAAoJEIwa5zzehBx31ZIQAIxJFxE+KLGYg8jaD5NZqZJ+
 z6y2EkZhHyIhgiH0RfQwsKeOiEQFh4QV3u5j0V+8ohbGTdAH00lvHZo8c2tAVTWT
 aU7AahEOnlvUqMG/Nw1FGOUH0WJbOzkzHxIwOdLEwLqUPP6wMaV75xGAXrKU3K15
 hyGsTXQalEat4wec7dTfpMs1YioZj8SOMhrlY8SLPJ4KD4Ql3c2pgT1SYyKERrGe
 wnzPoDIMZj7VXvLoKOrjZqaW69emYAgph4GleLSp/0/SgiMQh8NjicgYjAdyf2Rk
 KXFd5NHXF0WzgvWQr6xC8JEnlaittdWxVIZaEPOiNoDKDIvpXaWFfqRfF/40HJhI
 8ixUsLHDZxbw/ySxe9SZmTS+i2yBGej1znpRbsUnws8h8fN9Eoz9V8y0BWO0TxpW
 oThopAZTJxdpCXE9nKhk/Dau0oiW6t8FelUG1mIFleNSA2XW/SAeqWn5FW3PTxC1
 whNj01JvDH5JilynK8s/UkH1mfGyvJA3hsnL6AbgfsY605pWySDgzexDRWqbq+B1
 z/ZmVvN3mM+7ycM1AmL/tGArPtLdDVRwRo8eqBKZrAaHfW7g8WKbDoc4T7MVI0c1
 O7dIG+NMXIpZKbBOIXPliWdyBlQ56da3XF9iNaYav2mRMwUiqHTbaHakPJM89fBd
 qOsKCA1BcRQgJb/eE7rh
 =+zKc
 -----END PGP SIGNATURE-----

Merge tag 'defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc defconfig updates from Olof Johansson:
 "This might be the last time we do a standalone defconfig branch, since
  we now prefer to get them with the rest of the subarch updates
  instead.  These add a handful of useful options on various platforms,
  enable new boards and SoCs, etc."

* tag 'defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: tegra: defconfig updates
  ARM: LPC32xx: Defconfig update
  ARM: mach-shmobile: marzen: defconfig update
  ARM: mxs_defconfig: Add SPI and LRADC support
  ARM: s3c6400_defconfig: enable more boards in defconfig
  ARM: imx_v6_v7_defconfig: Remove CONFIG_DEFAULT_MMAP_MIN_ADDR
  ARM: imx_v6_v7_defconfig: Add Chipidea USB driver support
  ARM: mxs_defconfig: Add framebuffer support
  ARM: mxs_defconfig: Add LED, PWM and MTD_CHAR support
  ARM: mxs_defconfig: Enable USB host
2012-10-07 20:49:16 +09:00
Kuninori Morimoto eb8ca943ba ARM: shmobile: marzen: enable thermal sensor
Marzen board can measure its thermal by this patch.
	cat /sys/class/thermal/thermal_zoneX/temp

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2012-09-06 10:24:17 +09:00
Simon Horman f0a1f1c226 ARM: mach-shmobile: marzen: defconfig update
Update marzen defconfig
* Enable MMC Block device as SDHI hw is now supported.
* Default to NFS root, this is consistent with many other
  shmobile boards
* Enable UNIX which is required by udevd
* Enable SDHI

Other changes are noise due to using make savedefconfig
to create the new defconfig.

Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2012-09-06 10:13:39 +09:00
Paul Mundt d06830e714 ARM: mach-shmobile: Add marzen defconfig.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-10 16:57:48 +09:00