Commit Graph

52 Commits

Author SHA1 Message Date
Dan Carpenter 6734092e66 isci: add a couple __iomem annotations
These are __iomem.  Sparse complains if we don't have that.

drivers/scsi/isci/phy.c +149 70: warning:
        incorrect type in initializer (different address spaces)

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-07-03 12:09:32 -07:00
Dave Maurer a900375605 isci: fix COMSAS negation timout workaround for WD SAS drives
The following patch is a fix for the WD workaround
COMSAS negation timeout change. This patch disables the
OOB SM when the OOB is placed in reset, which allows
the updated COMSAS negation timeout value to take
effect.

Cc: Dan Thompson <daniel.j.thompson@intel.com>
Reported-by: Dan Thompson <daniel.j.thompson@intel.com>
Signed-off-by: Dave Maurer <david.c.maurer@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-07-03 12:09:30 -07:00
Jeff Skirvin c5457a82a4 isci: Change the phy control and link reset interface for HW reasons.
There is an apparent HW lockup caused when the PE is disabled while there
is an outstanding TC in progress.  This change puts the link into OOB to
force the TC to end before the PE is disabled.

Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-05-17 14:33:42 -07:00
Andrzej Jakowski 6119908f0f isci: Changes in COMSAS timings enabling ISCI to detect buggy disc drives.
This patch extends timings in COMSAS signaling, so ISCI can detect disc
drives having issues to send COMSAS in correct time frame.

Signed-off-by: Andrzej Jakowski <andrzej.jakowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-05-17 12:27:28 -07:00
Tom Jackson 944b787d0a isci: Don't filter BROADCAST CHANGE primitives
Per the SAS spec, several types of BROADCAST CHANGE primitives
must cause re-discovery of the originating expander.
Only the standard BROADCAST CHANGE primitive was being
sent to the LIBSAS layer.  The other BC primitives have been
added to the sci_phy_event_handler()

Signed-off-by: Tom Jackson <thomas.p.jackson@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-05-17 12:27:12 -07:00
Dan Williams c79dd80d73 isci: kill sci_phy_protocol and sci_request_protocol
Holdovers from the initial driver cleanup, replace with enum sas_protocol.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-05-17 12:27:11 -07:00
Dan Williams e462116afb [SCSI] isci: improve phy event warnings
isci occasionally spews messages like:

isci 0000:03:00.0: sci_phy_event_handler: PHY starting substate machine received unexpected event_code b3940000

...which is not very helpful, since we don't know which controller,
which phy, the exact state, or a decode of the event.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 16:24:13 -06:00
Dan Williams d7a0ccdd9b [SCSI] isci: debug, provide state-enum-to-string conversions
Debugging the driver requires tracing the state transtions and tracing
state names is less work than decoding numbers.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 16:23:15 -06:00
Dan Williams c132f69208 [SCSI] isci: kill iphy->isci_port lookups
This field is a holdover from the OS abstraction conversion.  The stable
phy to port lookups are done via iphy->ownining_port under scic_lock.
After this conversion to use port->lldd_port the only volatile lookup is
the initial lookup in isci_port_formed().  After that point any lookup
via a successfully notified domain_device is guaranteed to be valid
until the domain_device is destroyed.

Delete ->start_complete as it is only set once and is set as a
consequence of the port going link up, by definition of getting a port
formed event the port is "ready".

While we are correcting port lookups also move the asd_sas_port table
out from under the isci_port.  This is to preclude any temptation to use
container_of() to convert an asd_sas_port to an isci_port, the
association is dynamic and under libsas control.

Tested-by: Maciej Trela <maciej.trela@intel.com>
[dmilburn@redhat.com: fix i686 compile error]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:05:05 -06:00
Marcin Tomczak 0953dbea1d [SCSI] isci: fix start OOB
Split scu_link_layer_start_oob function to reset and enable and
add flush after all steps.

Signed-off-by: Marcin Tomczak <marcin.tomczak@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16 11:47:27 +04:00
Dave Jiang 594e566ae5 [SCSI] isci: oem parameter format v1.1 (ssc select)
v1.1 allows finer grained tuning of the SSC (spread-spectrum-clocking)
settings for SAS and SATA.  See notes in probe_roms.h

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16 11:42:00 +04:00
Jeff Skirvin afd13a1f2b [SCSI] isci: update afe (analog-front-end) recipe for C1
C1 silicon requires updates to the phy tuning recipe and also support
for user provided cable selects (per-phy) for short, medium, and long
cables.  Default to 'short' awaiting support for selecting the cable via
oem parameters.

Reviewed-by: Jiangbi Liu <jiangbi.liu@intel.com>
Signed-off-by: Marcin Tomczak <marcin.tomczak@intel.com>
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16 11:40:29 +04:00
Dan Williams 2e5da889d4 [SCSI] isci: cleanup oem parameter and recipe handling
Before updating the code to support the latest platform updates and
silicon revision cleanup some of the long deref chains.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-16 11:39:52 +04:00
Linus Torvalds ec7ae51753 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits)
  [SCSI] qla4xxx: export address/port of connection (fix udev disk names)
  [SCSI] ipr: Fix BUG on adapter dump timeout
  [SCSI] megaraid_sas: Fix instance access in megasas_reset_timer
  [SCSI] hpsa: change confusing message to be more clear
  [SCSI] iscsi class: fix vlan configuration
  [SCSI] qla4xxx: fix data alignment and use nl helpers
  [SCSI] iscsi class: fix link local mispelling
  [SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA
  [SCSI] aacraid: use lower snprintf() limit
  [SCSI] lpfc 8.3.27: Change driver version to 8.3.27
  [SCSI] lpfc 8.3.27: T10 additions for SLI4
  [SCSI] lpfc 8.3.27: Fix queue allocation failure recovery
  [SCSI] lpfc 8.3.27: Change algorithm for getting physical port name
  [SCSI] lpfc 8.3.27: Changed worst case mailbox timeout
  [SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes
  [SCSI] megaraid_sas: Changelog and version update
  [SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic
  [SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support
  [SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers
  [SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts
  ...
2011-10-28 16:44:18 -07:00
Dan Williams ac013ed1cb [SCSI] isci: export phy events via ->lldd_control_phy()
Allow the sas-transport-class to update events for local phys via a new
PHY_FUNC_GET_EVENTS command to ->lldd_control_phy().  Fixup drivers that
are not prepared for new enum phy_func values, and unify
->lldd_control_phy() error codes.

These are the SAS defined phy events that are reported in a
smp-report-phy-error-log command:
 * /sys/class/sas_phy/<phyX>/invalid_dword_count
 * /sys/class/sas_phy/<phyX>/running_disparity_error_count
 * /sys/class/sas_phy/<phyX>/loss_of_dword_sync_count
 * /sys/class/sas_phy/<phyX>/phy_reset_problem_count

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-02 13:24:26 -05:00
Jiri Kosina e060c38434 Merge branch 'master' into for-next
Fast-forward merge with Linus to be able to merge patches
based on more recent version of the tree.
2011-09-15 15:08:18 +02:00
Justin P. Mattock 699324871f treewide: remove extra semicolons from various parts of the kernel
This is a resend from the original, changing the title from PATCH to
RFC(since this is a review for commit, and I should have put that the first go around).
and also removing some of the commit's with ia64 and bash since it is significant.
let me know if I might have missed anything etc..

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-15 14:50:49 +02:00
Marcin Tomczak 985af6f70d [SCSI] isci: change sas phy timeouts from 54us to 59us
Need the following workaround in the driver for interoperability with
the older Intel SSD drives and any other SATA drive that may exhibit the
same behavior. This is a corner case where SCU speed is limited to
either 3G or 1.5G and the drive has a period of DC idle when it switches
speed during SATA speed negotiation. Workaround :change PHYTOV[31:24]
from 0x36 to 0x3B.

Signed-off-by: Marcin Tomczak <marcin.tomczak@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-23 19:52:14 -07:00
James Bottomley a5ec7f86dc [SCSI] isci: fix checkpatch errors
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-03 14:26:24 -05:00
Dan Williams dc00c8b694 isci: cleanup silicon revision detection
Perform checking per-pci device (even though all systems will only have
1 pci device in this generation), and delete support for silicon that
does not report a proper revision (i.e. A0).

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:52 -07:00
Dan Williams 34a991587a isci: kill 'get/set' macros
Most of these simple dereference macros are longer than their open coded
equivalent.  Deleting enum sci_controller_mode is thrown in for good
measure.

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:52 -07:00
Dan Williams 89a7301f21 isci: retire scic_sds_ and scic_ prefixes
The distinction between scic_sds_ scic_ and sci_ are no longer relevant
so just unify the prefixes on sci_.  The distinction between isci_ and
sci_ is historically significant, and useful for comparing the old
'core' to the current Linux driver. 'sci_' represents the former core as
well as the routines that are closer to the hardware and protocol than
their 'isci_' brethren. sci == sas controller interface.

Also unwind the 'sds1' out of the parameter structs.

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:52 -07:00
Dan Williams d9dcb4ba79 isci: unify isci_host and scic_sds_controller
Remove the distinction between these two implementations and unify on
isci_host (local instances named ihost).  Hmmm, we had two
'oem_parameters' instances, one was unused... nice.

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:52 -07:00
Dan Williams ffe191c92f isci: unify isci_port and scic_sds_port
Remove the distinction between these two implementations and unify on
isci_port (local instances named iport).  The duplicate '->owning_port' and
'->isci_port' in both isci_phy and isci_remote_device will be fixed in a later
patch... this is just the straightforward rename/unification.

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:52 -07:00
Dan Williams 852809559e isci: unify isci_phy and scic_sds_phy
They are one in the same object so remove the distinction.  The near
duplicate fields (owning_port, and isci_port) will be cleaned up
after the scic_sds_port isci_port unification.

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:52 -07:00
Dan Williams 5076a1a97e isci: unify isci_request and scic_sds_request
They are one in the same object so remove the distinction.  The near
duplicate fields (owning_controller, and isci_host) will be cleaned up
after the scic_sds_contoller isci_host unification.

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:52 -07:00
Dan Williams 4cffe13e0d isci: fix frame received locking
Updates to the frame_rcvd before need to be atomic with respect to when
they are evaluated by libsas.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:51 -07:00
Jeff Skirvin 9b917987fd isci: Disable link layer hang detection
Some targets exceed the hang detect timer.  Use the OS timeout to
catch hung tasks.

Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:50 -07:00
Edmund Nadolski 12ef65444d isci: additional state machine cleanup
Additional state machine cleanups:

 o Remove static functions sci_state_machine_exit_state() and
   sci_state_machine_enter_state()
 o Combines sci_base_state_machine_construct() and
   sci_base_state_machine_start() into a single function,
   sci_init_sm()
 o Remove sci_base_state_machine_stop() which is unused.
 o Kill state_machine.[ch]

Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com>
[fixed too large to inline functions]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:50 -07:00
Edmund Nadolski e301370ac5 isci: state machine cleanup
This cleans up several areas of the state machine mechanism:

 o Rename sci_base_state_machine_change_state to sci_change_state
 o Remove sci_base_state_machine_get_state function
 o Rename 'state_machine' struct member to 'sm' in client structs
 o Shorten the name of request states
 o Shorten state machine state names as follows:
        SCI_BASE_CONTROLLER_STATE_xxx to SCIC_xxx
        SCI_BASE_PHY_STATE_xxx to SCI_PHY_xxx
        SCIC_SDS_PHY_STARTING_SUBSTATE_xxx to SCI_PHY_SUB_xxx
        SCI_BASE_PORT_STATE_xxx to SCI_PORT_xxx and
        SCIC_SDS_PORT_READY_SUBSTATE_xxx to SCI_PORT_SUB_xxx
        SCI_BASE_REMOTE_DEVICE_STATE_xxx to SCI_DEV_xxx
        SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_xxx to SCI_STP_DEV_xxx
        SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_xxx to SCI_SMP_DEV_xxx
        SCIC_SDS_REMOTE_NODE_CONTEXT_xxx_STATE to SCI_RNC_xxx

Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:50 -07:00
Edmund Nadolski 8db02da528 isci: remove isci_timer interface
Delete code which is no longer used.

Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:50 -07:00
Edmund Nadolski a628d47857 isci: convert phy sata_timeout_timer to sci_timer
Convert the sata_timeout_timer in the scic_sds_phy struct to
use a struct sci_timer

Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:49 -07:00
Dan Williams 9269e0e898 isci: add some type safety to the state machine interface
Now that any given object type only has one state_machine we can use
container_of() to get back to the given state machine owner.

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:49 -07:00
Dan Williams 4f20ef4f57 isci: clarify phy to port lookups
While cleaning up the driver it is very tempting to convert scic_sds_get_*
macros to their open coded equivalent.  They are all just pointer dereferences
*except* scic_sds_phy_get_port() which returns NULL if the phy is assigned to
the dummy port.  Clarify this by renaming it to phy_get_non_dummy_port().

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:48 -07:00
Dan Williams 5b1d4af251 isci: unify phy consume_power handlers
Unify the implementations in scic_sds_phy_consume_power_handler(), and kill
the state handler plus infrastructure.

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:48 -07:00
Dan Williams 23506a69e2 isci: unify phy event handlers
Unify the implementations in scic_sds_phy_event_handler(), and kill the state handler

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:48 -07:00
Dan Williams c4441abc25 isci: unify phy frame handlers
Unify the implementations in scic_sds_phy_frame_handler(), and kill the state handler

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:48 -07:00
Dan Williams 35b317bec5 isci: remove phy destruct handlers
Unused infrastructure.

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:48 -07:00
Dan Williams 0cf36fa9f1 isci: unify phy reset handlers
Unify the implementations in scic_sds_phy_reset(), and kill the state handler

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:48 -07:00
Dan Williams 931532364e isci: unify phy stop handlers
Merge all implementations in scic_sds_phy_stop(), and kill the state handler

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:48 -07:00
Dan Williams 966699b50c isci: unify phy start handlers
Implement all handlers in scic_sds_phy_start(), and kill the state handler

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:48 -07:00
Adam Gruchala 4a33c525f0 isci: merge phy substates
Merged states and substates into one state machine, as we always
unconditionally transitioned to the substate machine it was straightforward to
enter that substate from the starting state.

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Adam Gruchala <adam.gruchala@intel.com>
[fixed construction, starting_state_enter, and starting check]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:48 -07:00
Dan Williams e2f8db509f isci: uplevel port infrastructure
* Move port configuration agent implementation
* Merge core/scic_sds_port.[ch] into port.[ch]

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:47 -07:00
Dan Williams d35bc1bd18 isci: uplevel phy infrastructure
Merge core/scic_sds_phy.[ch] into phy.[ch]

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:47 -07:00
Dan Williams ce2b3261b6 isci: unify constants
cross driver constants are spread out over multiple header files, consolidate
them into isci.h, and push some includes out to the source files that need
them.

TODO: remove SCI_MODE_SIZE infrastructure.
TODO: task.h is full of inlines that are too large

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:47 -07:00
Dan Williams 4b33981ade isci: unify phy data structures
Make scic_sds_phy a member of isci_phy and merge their lifetimes which
means removing the phy table from scic_sds_controller in favor of the
one at that isci_host level.

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:47 -07:00
Artur Wojcik cc3dbd0a91 isci: unify isci_host data structures
Make it explicit that isci_host and scic_sds_controller are one in the same
object.

Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
[removed ->ihost back pointer]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:04:46 -07:00
Maciej Patelczyk e1e72a00dd isci: Removed sci_base_object from scic_sds_phy.
The 'struct sci_base_object' was removed from the struct
scic_sds_phy and was replaced by a pointer to
struct isci_phy.

Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:00:38 -07:00
Dan Williams 4393aa4e6b isci: fix fragile/conditional isci_host lookups
A domain_device can always reference back to ->lldd_ha unlike local lldd
structures.  Fix up cases where the driver uses local objects to look up the
isci_host.  This also changes the calling conventions of some routines to
expect a valid isci_host parameter rather than re-lookup the pointer on entry.

Incidentally cleans up some macros that are longer to type than the open-coded
equivalent:
  isci_host_from_sas_ha
  isci_dev_from_domain_dev

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 04:00:36 -07:00
Dave Jiang 4d07f7f367 isci: Adding support for phy enable and disable
Adding support for PHY_FUNC_LINK_RESET and PHY_FUNC_DISABLE. This allow the
sysfs knob enable (both 0 and 1) and link_reset to work properly.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-03 03:55:29 -07:00