Commit Graph

2556 Commits

Author SHA1 Message Date
Christoph Hellwig 6faadbbb7f dmi: Mark all struct dmi_system_id instances const
... and __initconst if applicable.

Based on similar work for an older kernel in the Grsecurity patch.

[JD: fix toshiba-wmi build]
[JD: add htcpen]
[JD: move __initconst where checkscript wants it]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
2017-09-14 11:59:30 +02:00
Linus Torvalds 0e271fd59f platform-drivers-x86 for v4.14-1
Several fixes from static analysis and message noise reduction. Correct
 WMI core and related drivers to evaluate instance number 0x0 in
 accordance with the documentation. Add intel-telemetry support for
 Gemini Lake. Various individual driver fixes noted below.
 
 Two commits appear here which were previously merged during the 4.13 RC
 cycle:
 - baa5480b05 platform/x86: dell-wmi: Fix driver interface version query
 - c801603e6d platform/x86: intel-vbtn: match power button on press rather than release
 
 dell-wmi:
  - Update dell_wmi_check_descriptor_buffer() to new model
 
 intel-vbtn:
  - reduce unnecessary messages for normal users
  - match power button on press rather than release
 
 intel-hid:
  - reduce unnecessary messages for normal users
 
 thinkpad_acpi:
  - Fix warning about deprecated hwmon_device_register
 
 wmi:
  - Fix check for method instance number
 
 ideapad-laptop:
  - Expose conservation mode switch
 
 intel_pmc_core:
  - Make the driver PCH family agnostic
 
 peaq-wmi:
  - Evaluate wmi method with instance number 0x0
  - silence a static checker warning
 
 mxm-wmi:
  - Evaluate wmi method with instance number 0x0
 
 asus-wmi:
  - Evaluate wmi method with instance number 0x0
 
 intel_scu_ipc:
  - make intel_scu_ipc_pdata_t const
 
 intel_mid_powerbtn:
  - make mid_pb_ddata const
  - fix error return code in mid_pb_probe()
 
 hp-wmi:
  - Remove unused macro helper
  - Correctly determine method id in WMI calls
 
 dell-wmi:
  - Fix driver interface version query
 
 intel_telemetry:
  - remove redundant macro definition
  - Add GLK PSS Event Table
 
 alienware-wmi:
  - fix format string overflow warning
 
 ibm_rtl:
  - remove unnecessary static in ibm_rtl_write()
 
 msi-wmi:
  - remove unnecessary static in msi_wmi_notify()
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJZsvdiAAoJEKbMaAwKp364V+UIAI27WP1MKQ6zKiXAt6TTLQww
 RGbeTrgxsHwxIp1ioo3MZtRa4uTMrJ/A/Es7nzZBSAAp8qPLOCaZYGtsH0tYkzcc
 zGLw+q5EBEjiMiq8WvkgD+NLq6icdsB0MUuuh06y34/LWiOwpp9wNemszHO9Vo2/
 vc5PkgNmMx5K4zJvl6A3JAY98XlXxG65vYMrsIL17EFwZjuixrcCjDY86HKxEnNV
 tmfJ1Mhiu5HnDniCgRubdRBo4LwAeRdrXXkrsTZip+4RuXvm0gvxHujwgllIY4Ns
 m6xFXQApaGtXxd9vcSBHXE7whTgWrb7yPhUQzgt/Dd3E6ywF2THfn5jvwJUEflc=
 =LuAp
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v4.14-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:
 "Several fixes from static analysis and message noise reduction.
  Correct WMI core and related drivers to evaluate instance number 0x0
  in accordance with the documentation. Add intel-telemetry support for
  Gemini Lake. Various individual driver fixes noted below.

  dell-wmi:
   - Update dell_wmi_check_descriptor_buffer() to new model

  intel-vbtn:
   - reduce unnecessary messages for normal users
   - match power button on press rather than release

  intel-hid:
   - reduce unnecessary messages for normal users

  thinkpad_acpi:
   - Fix warning about deprecated hwmon_device_register

  wmi:
   - Fix check for method instance number

  ideapad-laptop:
   - Expose conservation mode switch

  intel_pmc_core:
   - Make the driver PCH family agnostic

  peaq-wmi:
   - Evaluate wmi method with instance number 0x0
   - silence a static checker warning

  mxm-wmi:
   - Evaluate wmi method with instance number 0x0

  asus-wmi:
   - Evaluate wmi method with instance number 0x0

  intel_scu_ipc:
   - make intel_scu_ipc_pdata_t const

  intel_mid_powerbtn:
   - make mid_pb_ddata const
   - fix error return code in mid_pb_probe()

  hp-wmi:
   - Remove unused macro helper
   - Correctly determine method id in WMI calls

  dell-wmi:
   - Fix driver interface version query

  intel_telemetry:
   - remove redundant macro definition
   - Add GLK PSS Event Table

  alienware-wmi:
   - fix format string overflow warning

  ibm_rtl:
   - remove unnecessary static in ibm_rtl_write()

  msi-wmi:
   - remove unnecessary static in msi_wmi_notify()"

* tag 'platform-drivers-x86-v4.14-1' of git://git.infradead.org/linux-platform-drivers-x86: (23 commits)
  platform/x86: dell-wmi: Update dell_wmi_check_descriptor_buffer() to new model
  platform/x86: intel-vbtn: reduce unnecessary messages for normal users
  platform/x86: intel-hid: reduce unnecessary messages for normal users
  platform/x86: thinkpad_acpi: Fix warning about deprecated hwmon_device_register
  platform/x86: wmi: Fix check for method instance number
  platform/x86: ideapad-laptop: Expose conservation mode switch
  platform/x86: intel_pmc_core: Make the driver PCH family agnostic
  platform/x86: peaq-wmi: Evaluate wmi method with instance number 0x0
  platform/x86: mxm-wmi: Evaluate wmi method with instance number 0x0
  platform/x86: asus-wmi: Evaluate wmi method with instance number 0x0
  platform/x86: intel_scu_ipc: make intel_scu_ipc_pdata_t const
  platform/x86: intel_mid_powerbtn: make mid_pb_ddata const
  platform/x86: intel_mid_powerbtn: fix error return code in mid_pb_probe()
  platform/x86: hp-wmi: Remove unused macro helper
  platform/x86: hp-wmi: Correctly determine method id in WMI calls
  platform/x86: intel-vbtn: match power button on press rather than release
  platform/x86: dell-wmi: Fix driver interface version query
  platform/x86: intel_telemetry: remove redundant macro definition
  platform/x86: intel_telemetry: Add GLK PSS Event Table
  platform/x86: alienware-wmi: fix format string overflow warning
  ...
2017-09-08 16:04:50 -07:00
Rafael J. Wysocki 7b01463e51 Merge branch 'pm-sleep'
* pm-sleep:
  ACPI / PM: Check low power idle constraints for debug only
  PM / s2idle: Rename platform operations structure
  PM / s2idle: Rename ->enter_freeze to ->enter_s2idle
  PM / s2idle: Rename freeze_state enum and related items
  PM / s2idle: Rename PM_SUSPEND_FREEZE to PM_SUSPEND_TO_IDLE
  ACPI / PM: Prefer suspend-to-idle over S3 on some systems
  platform/x86: intel-hid: Wake up Dell Latitude 7275 from suspend-to-idle
  PM / suspend: Define pr_fmt() in suspend.c
  PM / suspend: Use mem_sleep_labels[] strings in messages
  PM / sleep: Put pm_test under CONFIG_PM_SLEEP_DEBUG
  PM / sleep: Check pm_wakeup_pending() in __device_suspend_noirq()
  PM / core: Add error argument to dpm_show_time()
  PM / core: Split dpm_suspend_noirq() and dpm_resume_noirq()
  PM / s2idle: Rearrange the main suspend-to-idle loop
  PM / timekeeping: Print debug messages when requested
  PM / sleep: Mark suspend/hibernation start and finish
  PM / sleep: Do not print debug messages by default
  PM / suspend: Export pm_suspend_target_state
2017-09-04 00:06:02 +02:00
Andy Lutomirski 00ebbeb39b platform/x86: dell-wmi: Update dell_wmi_check_descriptor_buffer() to new model
This converts dell_wmi_check_descriptor_buffer() to the new driver
model interface and puts the interface version in dell_wmi_priv
where it belongs.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-08-18 17:06:32 -07:00
Alex Hung a9c37b74fd platform/x86: intel-vbtn: reduce unnecessary messages for normal users
Unsupported events is only useful for developers and does not meaningful
for users. Using dev_dbg makes more sense and reduces noise in kernel
messages.

Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-08-18 16:23:15 -07:00
Alex Hung d496c8750f platform/x86: intel-hid: reduce unnecessary messages for normal users
Unsupported events is only useful for developers and does not meaningful
for users. Using dev_dbg makes more sense and reduces noise in kernel
messages.

Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-08-18 16:23:15 -07:00
Stanislav Fomichev 6b99e3569b platform/x86: thinkpad_acpi: Fix warning about deprecated hwmon_device_register
Use hwmon_device_register_with_groups instead of deprecated
hwmon_device_register and fix a dmesg warning.

This patch however changes the userspace API.
hwmon_device_register_with_groups takes `hwmon' name as an argument and
creates a name file in the `hwmon' device, not in the `platform_device'.
This allows us to remove custom `name' device attribute, but in order to
make lm-sensors happy we also have to move fans and thermal attributes
to the `hwmon' device.

Even though this patch changes userspace API, it's still compatible with
the lm-sensors. Starting with lm-sensors 3.0 (circa 2007), it looks at
both hwmon and the backing device for the name and other attributes.

before:
$ cat /sys/devices/platform/thinkpad_hwmon/{name,fan1_input}
thinkpad
2007
$ cat /sys/devices/platform/thinkpad_hwmon/hwmon/hwmon1/{name,fan1_input}
cat: /sys/devices/platform/thinkpad_hwmon/hwmon/hwmon1/name: No such file or directory
cat: /sys/devices/platform/thinkpad_hwmon/hwmon/hwmon1/fan1_input: No such file or directory
$ cat /sys/class/hwmon/hwmon1/{name,fan1_input}
cat: /sys/class/hwmon/hwmon1/name: No such file or directory
cat: /sys/class/hwmon/hwmon1/fan1_input: No such file or directory
$ sensors
thinkpad-isa-0000
Adapter: ISA adapter
fan1:        3533 RPM

after:
$ cat /sys/devices/platform/thinkpad_hwmon/{name,fan1_input}
cat: /sys/devices/platform/thinkpad_hwmon/name: No such file or directory
cat: /sys/devices/platform/thinkpad_hwmon/fan1_input: No such file or directory
$ cat /sys/devices/platform/thinkpad_hwmon/hwmon/hwmon1/{name,fan1_input}
thinkpad
3478
$ cat /sys/class/hwmon/hwmon1/{name,fan1_input}
thinkpad
3478
$ sensors
thinkpad-isa-0000
Adapter: ISA adapter
fan1:        3489 RPM

$ sensors -v
sensors version 3.4.0 with libsensors version 3.4.0

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
[dvhart: cleaned up commit log, bumped version to 4.14 in the doc change]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-08-18 15:57:24 -07:00
Pali Rohár 6afa1e2a32 platform/x86: wmi: Fix check for method instance number
instance_count defines number of instances of data block and instance
itself is indexed from zero, which means first instance has number 0.
Therefore check for invalid instance should be non-strict inequality.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-18 15:10:40 +03:00
Hao Wei Tee ade5029618 platform/x86: ideapad-laptop: Expose conservation mode switch
This exposes the battery conservation mode present on some (?) IdeaPads.
The mode is set by calling ACPI method SBMC with argument 3 (on) or
5 (off). Status is reported in bit 5 of the return value of ACPI method
GBMD.

Signed-off-by: Hao Wei Tee <angelsl@in04.sg>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-14 23:27:12 +03:00
Srinivas Pandruvada c977b98bbe platform/x86: intel_pmc_core: Make the driver PCH family agnostic
Although this driver did pretty good job in abstracting PCH specific
interfaces, but still there are some loose ends. For example
SLP_S0 counter (for reading SLP_S0 residency), PM config offset (for
checking permissions to read XRAM) and PPFEAR offset (for reading IP
status) is still hardcoded for a specific family of PCH.

This change extended the struct pmc_reg_map to allow per family
configuration of offsets and bits.

No functional change is expected with this change. This change allows
seamless additions to new PCH and create a baseline for other platform
specific extensions.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-13 16:01:22 +03:00
Pali Rohár 2cf7bdec2d platform/x86: peaq-wmi: Evaluate wmi method with instance number 0x0
According to Hans de Goede, WMI interface of thh peaq-wmi module has 10
instances but corresponding ACPI WMBC method does not check Arg0 (instance
number) at all. Therefore evaluate WMI method with first instance number
(0x0) instead of second (0x1).

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-13 15:55:06 +03:00
Pali Rohár f85a43b907 platform/x86: mxm-wmi: Evaluate wmi method with instance number 0x0
According to MXM 2.1 specification, there is the only one instance of the
WMI GUID F6CB5C3C-9CAE-4EBD-B577-931EA32A2CC0 and so it is instance 0x0.

MXM 2.1 specification:
https://lekensteyn.nl/files/docs/mxm-2.1-software-spec.pdf

_WDG dump:
// Methods GUID {F6CB5C3C-9CAE-4EBD-B577-931EA32A2CC0}
0x3C, 0x5C, 0xCB, 0xF6, 0xAE, 0x9C, 0xBD, 0x4E, 0xB5, 0x77, 0x93,
0x1E, 0xA3, 0x2A, 0x2C, 0xC0,
0x4D, 0x58,    // Object ID "MX" = method "WMMX"
1,             // Instance Count
0x02,          // Flags (WMIACPI_REGFLAG_METHOD)

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-13 15:55:05 +03:00
Pali Rohár 0fe5726121 platform/x86: asus-wmi: Evaluate wmi method with instance number 0x0
According to available DSDT dump from Asus machine, there is the only one
instance of the WMI GUID 97845ED0-4E6D-11DE-8A39-0800200C9A66 and so it is
0x0. Moreover corresponding method WMBC does not check Arg0 (instance
number) at all.

DSDT dump is available at:
https://lwn.net/Articles/391249/

_WDG dump:
0xD0, 0x5E, 0x84, 0x97, 0x6D, 0x4E, 0xDE, 0x11, 0x8A, 0x39, 0x08,
0x00, 0x20, 0x0C, 0x9A, 0x66,
0x42, 0x43,    // Object ID "BC" = method "WMBC"
0x01,          // Instance count
0x02,          // Flags

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-13 15:55:05 +03:00
Bhumika Goyal 9a862ed5f9 platform/x86: intel_scu_ipc: make intel_scu_ipc_pdata_t const
Make these const as they are only used during a copy operation.

Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-13 15:27:10 +03:00
Bhumika Goyal c94a8ff14d platform/x86: intel_mid_powerbtn: make mid_pb_ddata const
Make these const as they are only used during a copy operation.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-13 15:27:10 +03:00
Gustavo A. R. Silva fe4e8d0910 platform/x86: intel_mid_powerbtn: fix error return code in mid_pb_probe()
platform_get_irq() returns an error code, but the intel_mid_powerbtn
driver ignores it and always returns -EINVAL. This is not correct and,
prevents -EPROBE_DEFER from being propagated properly.

Print error message and propagate the return value of platform_get_irq
on failure.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-13 15:27:10 +03:00
Paulo Alcantara 50c55168d7 platform/x86: hp-wmi: Remove unused macro helper
The commit d8193cff33
    ("platform/x86: hp-wmi: Standardize enum usage for constants")
introduced a macro that had been never used.

Remove it.

Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
[andy wrote commit message]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-13 15:26:54 +03:00
Paulo Alcantara fbcb4a578b platform/x86: hp-wmi: Correctly determine method id in WMI calls
The WMI queries are performed by evaluating the WMPV() method from ACPI
DSDT tables, and it takes three arguments: instance index, method id and
input data (buffer).

Currently the method id is hard-coded to 0x3 in hp_wmi_perform_query()
which means that it will perform WMI calls that expect an output data of
size 0x80 (128). The output size is usually OK for the WMI queries we
perform, however it would be better to pick the correct one before
evaluating the WMI method.

Which correct method id to choose can be figured out by looking at the
following ASL code from WVPI() method:

...
Name (PVSZ, Package (0x05)
            {
            Zero,
            0x04,
            0x80,
            0x0400,
            0x1000
            })
Store (Zero, Local0)
If (LAnd (LGreaterEqual (Arg1, One), LLessEqual (Arg1, 0x05)))
{
    Store (DerefOf (Index (PVSZ, Subtract (Arg1, One))), Local0)
}
...

Arg1 is the method id and PVSZ is the package used to index the
corresponding output size; 1 -> 0, 2 -> 4, 3 -> 128, 4 -> 1024, 5 ->
4096.

This patch maps the output size passed in hp_wmi_perform_query() to the
correct method id before evaluating the WMI method.

Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-13 15:17:24 +03:00
Mario Limonciello 946da69954 platform/x86: intel-vbtn: match power button on press rather than release
This fixes a problem where the system gets stuck in a loop
unable to wakeup via power button in s2idle.

The problem happens because:
 - press power button:
   - system emits 0xc0 (power press), event ignored
   - system emits 0xc1 (power release), event processed,
     emited as KEY_POWER
   - set wakeup_mode to true
   - system goes to s2idle
 - press power button
   - system emits 0xc0 (power press), wakeup_mode is true,
     system wakes
   - system emits 0xc1 (power release), event processed,
     emited as KEY_POWER
   - system goes to s2idle again

To avoid this situation, process the presses (which matches what
intel-hid does too).

Verified on an Dell XPS 9365

Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-08-05 14:37:19 -07:00
Mario Limonciello c801603e6d platform/x86: intel-vbtn: match power button on press rather than release
This fixes a problem where the system gets stuck in a loop
unable to wakeup via power button in s2idle.

The problem happens because:
 - press power button:
   - system emits 0xc0 (power press), event ignored
   - system emits 0xc1 (power release), event processed,
     emited as KEY_POWER
   - set wakeup_mode to true
   - system goes to s2idle
 - press power button
   - system emits 0xc0 (power press), wakeup_mode is true,
     system wakes
   - system emits 0xc1 (power release), event processed,
     emited as KEY_POWER
   - system goes to s2idle again

To avoid this situation, process the presses (which matches what
intel-hid does too).

Verified on an Dell XPS 9365

Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-08-05 13:59:47 -07:00
Andy Lutomirski 51391caf99 platform/x86: dell-wmi: Fix driver interface version query
When I converted dell-wmi to the new bus infrastructure, I left the
call to dell_wmi_check_descriptor_buffer() in dell_wmi_init().  This
could cause two problems:

 - An error message when loading the driver on a system without
   dell-wmi.  We'd try to read the event descriptor even if the WMI
   GUID wasn't there.

 - A possible race if dell-wmi was loaded manually before wmi was
   fully initialized.

Fix it by moving the call to the probe function where it belongs.

Fixes: bff589be59 ("platform/x86: dell-wmi: Convert to the WMI bus infrastructure")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-08-01 15:41:43 -07:00
Rafael J. Wysocki 635173a17b platform/x86: intel-hid: Wake up Dell Latitude 7275 from suspend-to-idle
On Dell Latitude 7275 the 5-button array is not exposed in the
ACPI tables, but still notifies are sent to the Intel HID device
object (device ID INT33D5) in response to power button actions while
suspended to idle.  However, they are currently ignored as the
intel-hid driver is not prepared to take care of them.

As a result, power button wakeup from suspend-to-idle doesn't work
on this platform, but suspend-to-idle is the only reliable suspend
variant on it (the S3 implementation in the platform firmware turns
out to be broken), so it would be good to handle it properly.

For this reason, add an upfront check against the power button press
event (0xCE) to notify_handler() in the wakeup mode which allows it
to catch the power button wakeup notification on the affected
platform (even though priv->array is NULL on it) and should not
change the behavior on platforms with priv->array present (because
priv->array contains the event in question in those cases).

Link: https://bugzilla.kernel.org/show_bug.cgi?id=196115
Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-By: Mario Limonciello <mario.limonciello@dell.com>
2017-08-01 23:11:17 +02:00
Andy Lutomirski baa5480b05 platform/x86: dell-wmi: Fix driver interface version query
When I converted dell-wmi to the new bus infrastructure, I left the
call to dell_wmi_check_descriptor_buffer() in dell_wmi_init().  This
could cause two problems:

 - An error message when loading the driver on a system without
   dell-wmi.  We'd try to read the event descriptor even if the WMI
   GUID wasn't there.

 - A possible race if dell-wmi was loaded manually before wmi was
   fully initialized.

Fix it by moving the call to the probe function where it belongs.

Fixes: bff589be59 ("platform/x86: dell-wmi: Convert to the WMI bus infrastructure")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-08-01 13:53:49 -07:00
Rajneesh Bhardwaj 95a5af1838 platform/x86: intel_telemetry: remove redundant macro definition
Telemetry driver includes intel_telemetry.h which defines
TELEM_MAX_OS_ALLOCATED_EVENTS already.

Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Reviewed-by: Souvik K Chakravarty <souvik.k.chakravarty@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-25 20:54:04 +03:00
Rajneesh Bhardwaj 54949a606c platform/x86: intel_telemetry: Add GLK PSS Event Table
Some of the Primary Subsystem events differ on Gemini Lake but the IOSS
events remain same. This patch adds the updated PSS event table to enable
Telemetry driver on Gemini Lake.

Signed-off-by: Shanth Murthy <shanth.murthy@intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Reviewed-by: Souvik K Chakravarty <souvik.k.chakravarty@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-25 20:54:03 +03:00
Arnd Bergmann 22ff1a362d platform/x86: alienware-wmi: fix format string overflow warning
gcc points out a possible format string overflow for a large value of 'zone':

drivers/platform/x86/alienware-wmi.c: In function 'alienware_wmi_init':
drivers/platform/x86/alienware-wmi.c:461:24: error: '%02X' directive writing between 2 and 8 bytes into a region of size 6 [-Werror=format-overflow=]
   sprintf(buffer, "zone%02X", i);
                        ^~~~
drivers/platform/x86/alienware-wmi.c:461:19: note: directive argument in the range [0, 2147483646]
   sprintf(buffer, "zone%02X", i);
                   ^~~~~~~~~~
drivers/platform/x86/alienware-wmi.c:461:3: note: 'sprintf' output between 7 and 13 bytes into a destination of size 10

This replaces the 'int' variable with an 'u8' to make sure
it always fits, renaming the variable to 'zone' for clarity.

Unfortunately, gcc-7.1.1 still warns about it with that change, which
seems to be unintended by the gcc developers. I have opened a bug
against gcc with a reduced test case. As a workaround, I also
change the format string to use "%02hhX", which shuts up the
warning in that version.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81483
Link: https://patchwork.ozlabs.org/patch/788415/
Suggested-by: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[andy: added empty lines after u8 zone; definitions]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-25 20:54:03 +03:00
Gustavo A. R. Silva cd0223c64c platform/x86: ibm_rtl: remove unnecessary static in ibm_rtl_write()
Remove unnecessary static on local variable cmd_port_val. Such variable
is initialized before being used, on every execution path throughout
the function. The static has no benefit and, removing it reduces the
object file size.

This issue was detected using Coccinelle and the following semantic patch:
https://github.com/GustavoARSilva/coccinelle/blob/master/static/static_unused.cocci

In the following log you can see a difference in the object file size.
This log is the output of the size command, before and after the code
change:

before:
   text    data     bss     dec     hex filename
   3932    3440     512    7884    1ecc drivers/platform/x86/ibm_rtl.o

after:
   text    data     bss     dec     hex filename
   3887    3384     448    7719    1e27 drivers/platform/x86/ibm_rtl.o

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-25 09:56:38 -07:00
Gustavo A. R. Silva 6d8d556262 platform/x86: msi-wmi: remove unnecessary static in msi_wmi_notify()
Remove unnecessary static on local variable _key_. Such variable is
initialized before being used, on every execution path throughout
the function. The static has no benefit and, removing it reduces
the object file size.

This issue was detected using Coccinelle and the following semantic patch:
https://github.com/GustavoARSilva/coccinelle/blob/master/static/static_unused.cocci

In the following log you can see a significant difference in the object
file size. Also, there is a significant difference in the bss segment.
This log is the output of the size command, before and after the code
change:

before:
   text    data     bss     dec     hex filename
   6530    3736     320   10586    295a drivers/platform/x86/msi-wmi.o

after:
   text    data     bss     dec     hex filename
   6494    3648     256   10398    289e drivers/platform/x86/msi-wmi.o

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-25 09:56:38 -07:00
Dan Carpenter 890f658c10 platform/x86: peaq-wmi: silence a static checker warning
There is a harmless static checker warning here that unsigned values are
always >= 0.  The code looks like:

	if (peaq_ignore_events_counter && --peaq_ignore_events_counter >= 0)

The first part of the condition ensures that we never wrap around so the
code works as intended.  I've tweaked it slightly to avoid the warning.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-25 09:56:37 -07:00
Alexey Khoroshilov 972777171f platform/x86: wmi: Fix error handling in acpi_wmi_init()
The order of resource deallocations is messed up in acpi_wmi_init().
It should be vice versa.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-07-21 16:21:03 -07:00
Arnd Bergmann a00c69632a platform/x86: peaq-wmi: select INPUT_POLLDEV
The new driver fails to build without INPUT_POLLDEV

drivers/platform/x86/peaq-wmi.o: In function `peaq_wmi_exit':
peaq-wmi.c:(.exit.text+0x1c): undefined reference to `input_unregister_polled_device'
drivers/platform/x86/peaq-wmi.o: In function `peaq_wmi_init':
peaq-wmi.c:(.init.text+0x23): undefined reference to `input_allocate_polled_device'
peaq-wmi.c:(.init.text+0x18e): undefined reference to `input_register_polled_device'

For some reason, all other drivers that need this use 'select'
here rather than 'depends on', so I'm doing the same.

Fixes: 13bb0fd551 ("platform/x86: peaq-wmi: Add new peaq-wmi driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-07-20 16:57:51 -07:00
Linus Torvalds 568d135d33 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "Boston platform support:
   - Document DT bindings
   - Add CLK driver for board clocks

  CM:
   - Avoid per-core locking with CM3 & higher
   - WARN on attempt to lock invalid VP, not BUG

  CPS:
   - Select CONFIG_SYS_SUPPORTS_SCHED_SMT for MIPSr6
   - Prevent multi-core with dcache aliasing
   - Handle cores not powering down more gracefully
   - Handle spurious VP starts more gracefully

  DSP:
   - Add lwx & lhx missaligned access support

  eBPF:
   - Add MIPS support along with many supporting change to add the
     required infrastructure

  Generic arch code:
   - Misc sysmips MIPS_ATOMIC_SET fixes
   - Drop duplicate HAVE_SYSCALL_TRACEPOINTS
   - Negate error syscall return in trace
   - Correct forced syscall errors
   - Traced negative syscalls should return -ENOSYS
   - Allow samples/bpf/tracex5 to access syscall arguments for sane
     traces
   - Cleanup from old Kconfig options in defconfigs
   - Fix PREF instruction usage by memcpy for MIPS R6
   - Fix various special cases in the FPU eulation
   - Fix some special cases in MIPS16e2 support
   - Fix MIPS I ISA /proc/cpuinfo reporting
   - Sort MIPS Kconfig alphabetically
   - Fix minimum alignment requirement of IRQ stack as required by
     ABI / GCC
   - Fix special cases in the module loader
   - Perform post-DMA cache flushes on systems with MAARs
   - Probe the I6500 CPU
   - Cleanup cmpxchg and add support for 1 and 2 byte operations
   - Use queued read/write locks (qrwlock)
   - Use queued spinlocks (qspinlock)
   - Add CPU shared FTLB feature detection
   - Handle tlbex-tlbp race condition
   - Allow storing pgd in C0_CONTEXT for MIPSr6
   - Use current_cpu_type() in m4kc_tlbp_war()
   - Support Boston in the generic kernel

  Generic platform:
   - yamon-dt: Pull YAMON DT shim code out of SEAD-3 board
   - yamon-dt: Support > 256MB of RAM
   - yamon-dt: Use serial* rather than uart* aliases
   - Abstract FDT fixup application
   - Set RTC_ALWAYS_BCD to 0
   - Add a MAINTAINERS entry

  core kernel:
   - qspinlock.c: include linux/prefetch.h

  Loongson 3:
   - Add support

  Perf:
   - Add I6500 support

  SEAD-3:
   - Remove GIC timer from DT
   - Set interrupt-parent per-device, not at root node
   - Fix GIC interrupt specifiers

  SMP:
   - Skip IPI setup if we only have a single CPU

  VDSO:
   - Make comment match reality
   - Improvements to time code in VDSO"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (86 commits)
  locking/qspinlock: Include linux/prefetch.h
  MIPS: Fix MIPS I ISA /proc/cpuinfo reporting
  MIPS: Fix minimum alignment requirement of IRQ stack
  MIPS: generic: Support MIPS Boston development boards
  MIPS: DTS: img: Don't attempt to build-in all .dtb files
  clk: boston: Add a driver for MIPS Boston board clocks
  dt-bindings: Document img,boston-clock binding
  MIPS: Traced negative syscalls should return -ENOSYS
  MIPS: Correct forced syscall errors
  MIPS: Negate error syscall return in trace
  MIPS: Drop duplicate HAVE_SYSCALL_TRACEPOINTS select
  MIPS16e2: Provide feature overrides for non-MIPS16 systems
  MIPS: MIPS16e2: Report ASE presence in /proc/cpuinfo
  MIPS: MIPS16e2: Subdecode extended LWSP/SWSP instructions
  MIPS: MIPS16e2: Identify ASE presence
  MIPS: VDSO: Fix a mismatch between comment and preprocessor constant
  MIPS: VDSO: Add implementation of gettimeofday() fallback
  MIPS: VDSO: Add implementation of clock_gettime() fallback
  MIPS: VDSO: Fix conversions in do_monotonic()/do_monotonic_coarse()
  MIPS: Use current_cpu_type() in m4kc_tlbp_war()
  ...
2017-07-15 10:59:54 -07:00
Linus Torvalds 6735a1971a platform-drivers-x86 for v4.13-2
Add new platform matches for silead_dmi and ideapad-laptop. Several
 constify patches for attribute_group structures. Fixes for peaq-wmi and
 intel_telemetry*.
 
 *Note: 74a1eb565c platform/x86: intel_telemetry_debugfs: fix oops when load/unload module
        is a duplicate cherry-picked from the 4.12 RC cycle
        (platform-drivers-x86-v4.12-2).
 
 silead_dmi:
  - Add entry for Ployer Momo7w tablet touchscreen
  - Add touchscreen info for I.T.Works TW891 2-in-1
 
 toshiba_acpi:
  - constify attribute_group structures.
 
 asus-wmi:
  - constify attribute_group structures.
 
 panasonic-laptop:
  - constify attribute_group structures.
 
 alienware-wmi:
  - constify attribute_group structures.
 
 samsung-laptop:
  - constify attribute_group structures.
 
 compal-laptop:
  - constify attribute_group structures.
 
 fujitsu-laptop:
  - constify attribute_group structures.
  - add NULL check on devm_kzalloc() return value
 
 peaq-wmi:
  - Fix peaq_ignore_events_counter handling off by 1
 
 ideapad-laptop:
  - Fix indentation in DMI table
  - Add several models to no_hw_rfkill
  - Add IdeaPad V510-15IKB to no_hw_rfkill
 
 intel_telemetry:
  - Add debugfs entry for S0ix residency
 
 intel_telemetry_debugfs:
  - fix some error codes in init
  - fix oops when load/unload module
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJZZ8I5AAoJEKbMaAwKp364YSgH/2snOmcYjFeI7oTHm021peAd
 n23HcTF623dmfQ2LTddPqhtzOAQH9ZZycEd4oW4MASWlntzPZFoxfKiclunvoyKm
 XuycYDOjAl7DnDnoZ8SD7E2QoNAnmmK9riJIudzyHTKCWdxMpWe0mDcR12Rb5uD8
 kOQ+ctI61zWfDWfZj+Fo7HvQ5HsfmLdS4Itjl38H1QyjzIdp0eNA5pZQP0deQ/0w
 vjhmLVT7KEqfRJ09RNIA1eIikyC1uiePUGe13nGEc3P9CpQ/yAVeYvP7za4W7tsF
 jL9s/6uVHnB69WrtWm8Y4l8h4mHymkBV3BxA/fZwaoNTAILH1O5pDHk8T71Po1E=
 =iVsK
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v4.13-2' of git://git.infradead.org/linux-platform-drivers-x86

Pull more x86 platform driver updates from Darren Hart:
 "Add new platform matches for silead_dmi and ideapad-laptop. Several
  constify patches for attribute_group structures. Fixes for peaq-wmi
  and intel_telemetry.

  silead_dmi:
   - Add entry for Ployer Momo7w tablet touchscreen
   - Add touchscreen info for I.T.Works TW891 2-in-1

  toshiba_acpi:
   - constify attribute_group structures.

  asus-wmi:
   - constify attribute_group structures.

  panasonic-laptop:
   - constify attribute_group structures.

  alienware-wmi:
   - constify attribute_group structures.

  samsung-laptop:
   - constify attribute_group structures.

  compal-laptop:
   - constify attribute_group structures.

  fujitsu-laptop:
   - constify attribute_group structures.
   - add NULL check on devm_kzalloc() return value

  peaq-wmi:
   - Fix peaq_ignore_events_counter handling off by 1

  ideapad-laptop:
   - Fix indentation in DMI table
   - Add several models to no_hw_rfkill
   - Add IdeaPad V510-15IKB to no_hw_rfkill

  intel_telemetry:
   - Add debugfs entry for S0ix residency

  intel_telemetry_debugfs:
   - fix some error codes in init
   - fix oops when load/unload module"

* tag 'platform-drivers-x86-v4.13-2' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: silead_dmi: Add entry for Ployer Momo7w tablet touchscreen
  platform/x86: toshiba_acpi: constify attribute_group structures.
  platform/x86: asus-wmi: constify attribute_group structures.
  platform/x86: panasonic-laptop: constify attribute_group structures.
  platform/x86: alienware-wmi: constify attribute_group structures.
  platform/x86: samsung-laptop: constify attribute_group structures.
  platform/x86: compal-laptop: constify attribute_group structures.
  platform/x86: fujitsu-laptop: constify attribute_group structures.
  platform/x86: peaq-wmi: Fix peaq_ignore_events_counter handling off by 1
  platform/x86: fujitsu-laptop: add NULL check on devm_kzalloc() return value
  platform/x86: silead_dmi: Add touchscreen info for I.T.Works TW891 2-in-1
  platform/x86: ideapad-laptop: Fix indentation in DMI table
  platform/x86: ideapad-laptop: Add several models to no_hw_rfkill
  platform/x86: ideapad-laptop: Add IdeaPad V510-15IKB to no_hw_rfkill
  platform/x86: intel_telemetry: Add debugfs entry for S0ix residency
  platform/x86: intel_telemetry_debugfs: fix some error codes in init
  platform/x86: intel_telemetry_debugfs: fix oops when load/unload module
2017-07-13 12:28:06 -07:00
Hans de Goede c3a73ed8a8 platform/x86: silead_dmi: Add entry for Ployer Momo7w tablet touchscreen
This Ployer Momo7w revision has the same hardware as the Trekstor
ST70416-6, so we re-use the surftab_wintron70_st70416_6_data.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-07-12 13:57:42 -07:00
Linus Torvalds a3ddacbae5 chrome-platform-for-linus-4.13
Changes in this pull request are around catching up
 cros_ec with the internal chromeos-kernel versions of
 cros_ec, cros_ec_lpc, and cros_ec_lightbar.
 
 Also, switching maintainership from olof to bleung.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCgAGBQJZZBB8AAoJEB8J9XsKL+ZYcf4P/iRXb23r6pJgaqE3jO1mLJjQ
 aJH8sMVk3q0tIA/Wo3blVZmUD87RkDPqQNRhUx4AKuTtkq+zi+YIdltBk9nyK2tZ
 oRKtAFe1RL1a7Bxvh2im51mFE91q05nItPee+zylAKHL2PudKsAtvsjqEP/qmIBm
 h3XkkOMzSB3cqAjzaLm6bE531pFoRx6yKWUMGr0aTbOjXewC2uhP/U9rJYqtiaYl
 1oRfg1759cUxH1QXmsKIA5Ua2gKDZ+32aszxxgxSWmZ5671SB0psuyLW4Aar7XS0
 MNKGIYgKWBAUHX8iBTLwz/Z4VBB8X9DS2BfDvCZwDJtjCjYcJPzLKjqyGeJ3wr0G
 jW/kfjJL0G1FPxmS7WnsiUcDJemn+p/ia2/9HipLMM61fy7clezmBaxV8I4aWMh0
 zxW8Bk7+qOOv9D72ErKKHJ1oaZ3EWXgWWfiUEmr+99n6GOfFu0vF5+gcdV4HVLKB
 g2Gmt89OE+oMBAlWtDhX/RdhY2Xxf4POsCriBrqrealYXe9NIxjrleKRr6ysEj37
 71/X6TFaqGTYoyyDAVjFmIu6upGVoCLLdx9b/BodV1hyq97AIKHOdzOXpCKk2nvx
 IuA+JOWeoSGBD28CBhuvitJFDwTJv973Z+N9VrvZj91MKI89zI3Y0+sPAm69fbQ4
 mqkTtiLPIfCsvZE/7lWN
 =QtSr
 -----END PGP SIGNATURE-----

Merge tag 'chrome-platform-for-linus-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform

Pull chrome platform updates from Benson Leung:
 "Changes in this pull request are around catching up cros_ec with the
  internal chromeos-kernel versions of cros_ec, cros_ec_lpc, and
  cros_ec_lightbar.

  Also, switching maintainership from olof to bleung"

* tag 'chrome-platform-for-linus-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
  platform/chrome : Add myself as Maintainer
  platform/chrome: cros_ec_lightbar - hide unused PM functions
  cros_ec: Don't signal wake event for non-wake host events
  cros_ec: Fix deadlock when EC is not responsive at probe
  cros_ec: Don't return error when checking command version
  platform/chrome: cros_ec_lightbar - Avoid I2C xfer to EC during suspend
  platform/chrome: cros_ec_lightbar - Add userspace lightbar control bit to EC
  platform/chrome: cros_ec_lightbar - Control of suspend/resume lightbar sequence
  platform/chrome: cros_ec_lightbar - Add lightbar program feature to sysfs
  platform/chrome: cros_ec_lpc: Add MKBP events support over ACPI
  platform/chrome: cros_ec_lpc: Add power management ops
  platform/chrome: cros_ec_lpc: Add support for GOOG004 ACPI device
  platform/chrome: cros_ec_lpc: Add support for mec1322 EC
  platform/chrome: cros_ec_lpc: Add R/W helpers to LPC protocol variants
  mfd: cros_ec: Add support for dumping panic information
  cros_ec_debugfs: Pass proper struct sizes to cros_ec_cmd_xfer()
  mfd: cros_ec: add debugfs, console log file
  mfd: cros_ec: Add EC console read structures definitions
  mfd: cros_ec: Add helper for event notifier.
2017-07-11 09:55:47 -07:00
Arvind Yadav 44bd76d0a3 platform/x86: toshiba_acpi: constify attribute_group structures.
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work
with const attribute_group. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
  26360	   1072	     24	  27456	   6b40	drivers/platform/x86/toshiba_acpi.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
  26424	   1008	     24	  27456	   6b40	drivers/platform/x86/toshiba_acpi.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-07-11 09:22:55 -07:00
Arvind Yadav e90d9ba837 platform/x86: asus-wmi: constify attribute_group structures.
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work
with const attribute_group. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
  13140	    840	      1	  13981	   369d	drivers/platform/x86/asus-wmi.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
  13268	    712	      1	  13981	   368d	drivers/platform/x86/asus-wmi.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-07-11 09:22:54 -07:00
Arvind Yadav 24f584055c platform/x86: panasonic-laptop: constify attribute_group structures.
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work
with const attribute_group. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   2505	    600	      4	   3109	    c25	drivers/platform/x86/panasonic-laptop.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   2569	    536	      4	   3109	    c25	drivers/platform/x86/panasonic-laptop.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-07-11 09:22:53 -07:00
Arvind Yadav 4b7942d8d1 platform/x86: alienware-wmi: constify attribute_group structures.
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work
with const attribute_group. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   6932	   1016	     48	   7996	   1f3c	drivers/platform/x86/alienware-wmi.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   7060	    888	     48	   7996	   1f64	drivers/platform/x86/alienware-wmi.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-07-11 09:22:52 -07:00
Arvind Yadav 8546268e11 platform/x86: samsung-laptop: constify attribute_group structures.
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work
with const attribute_group. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   8710	   5452	     23	  14185	   3769	drivers/platform/x86/samsung-laptop.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   8774	   5388	     23	  14185	   3769	drivers/platform/x86/samsung-laptop.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-07-11 09:22:51 -07:00
Arvind Yadav ab56246bee platform/x86: compal-laptop: constify attribute_group structures.
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work
with const attribute_group. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   6781	   6144	     34	  12959	   329f	drivers/platform/x86/compal-laptop.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   6845	   6080	     34	  12959	   329f	drivers/platform/x86/compal-laptop.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-07-11 09:22:49 -07:00
Arvind Yadav ee56ff71bb platform/x86: fujitsu-laptop: constify attribute_group structures.
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work
with const attribute_group. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   7474	   1205	     24	   8703	   21ff	drivers/platform/x86/fujitsu-laptop.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   7538	   1141	     24	   8703	   21ff	drivers/platform/x86/fujitsu-laptop.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-07-11 09:22:44 -07:00
Hans de Goede c1bda752fd platform/x86: peaq-wmi: Fix peaq_ignore_events_counter handling off by 1
If peaq_ignore_events_counter gets set to 1 we should skip polling 1
time, rather then ignoring it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-07-11 09:08:04 -07:00
Linus Torvalds 6972b007ca Merge (most of) tag 'mfd-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
 "New Drivers:
   - Intel Cherry Trail Whiskey Cove PMIC
   - TI LP87565 PMIC

  New Device Support:
   - Add support for Cannonlake to intel-lpss-pci
   - Add support for Simatic IOT2000 to intel_quark_i2c_gpio

  New Functionality:
   - Add Regulator support (axp20x)

  Fix-ups:
   - Rework IRQ handling (intel_soc_pmic_bxtwc, rtsx_pcr, cros_ec)
   - Remove unused/unwelcome code (ipaq-micro, wm831x-core, da9062-core)
   - Provide deregistration on unbind (rn5t618)
   - Rework DT code/documentation (arizona)
   - Constify things (fsl-imx25-tsadc)
   - MAINTAINERS updates (DA9062/61)
   - Kconfig configuration adaptions (INTEL_SOC_PMIC, MFD_AXP20X_I2C)
   - Switch to DMI matching (intel_quark_i2c_gpio)
   - Provide an appropriate level of error checking (wm831x-{i2c,spi},
     twl4030-irq, tc6393xb)
   - Make use of devm_* (resource handling) calls (intel_soc_pmic_bxtwc,
     stm32-timers, atmel-flexcom, cros_ec, fsl-imx25-tsadc,
     exynos-lpass, palmas, qcom-spmi-pmic, smsc-ece1099,
     motorola-cpcap)"

[ Skipped the last commit in that series that added eight thousand
  lines of pointless repeated register definitions.  - Linus ]

* tag 'mfd-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (38 commits)
  mfd: Add LP87565 PMIC support
  mfd: cros_ec: Free IRQ on exit
  dt-bindings: vendor-prefixes: Add arctic to vendor prefix
  mfd: da9061: Fix to remove BBAT_CONT register from chip model
  mfd: da9061: Fix to remove BBAT_CONT register from chip model
  mfd: axp20x-i2c: Document that this must be builtin on x86
  mfd: Add Cherry Trail Whiskey Cove PMIC driver
  mfd: tc6393xb: Handle return value of clk_prepare_enable
  mfd: intel_quark_i2c_gpio: Add support for SIMATIC IOT2000 platform
  mfd: intel_quark_i2c_gpio: Use dmi_system_id table for retrieving frequency
  mfd: motorola-cpcap: Use devm_of_platform_populate()
  mfd: smsc-ece: Use devm_of_platform_populate()
  mfd: qcom-spmi-pmic: Use devm_of_platform_populate()
  mfd: palmas: Use devm_of_platform_populate()
  mfd: exynos: Use devm_of_platform_populate()
  mfd: fsl-imx25: Use devm_of_platform_populate()
  mfd: cros_ec: Use devm_of_platform_populate()
  mfd: atmel: Use devm_of_platform_populate()
  mfd: stm32-timers: Use devm_of_platform_populate()
  mfd: intel_soc_pmic: Select designware i2c-bus driver
  ...
2017-07-07 13:30:05 -07:00
Gustavo A. R. Silva b77a537207 platform/x86: fujitsu-laptop: add NULL check on devm_kzalloc() return value
Check return value from call to devm_kzalloc()
in order to prevent a NULL pointer dereference.

This issue was detected using Coccinelle and the following semantic patch:

@@
expression x;
identifier fld;
@@

* x = devm_kzalloc(...);
  ... when != x == NULL
  x->fld

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-07-07 09:58:31 -07:00
Hans de Goede 4edfc5406a platform/x86: silead_dmi: Add touchscreen info for I.T.Works TW891 2-in-1
Add touchscreen info for I.T.Works TW891 2-in-1.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-07-06 15:34:46 -07:00
Linus Torvalds 0dfaeb618f platform-drivers-x86 for v4.13-1
Introduce new bus architecture for WMI and expose BMOF data through
 sysfs. Correct several assumptions about WMI instance number from 1 to
 0. Further fujitsu-laptop cleanups, continuing to prepare for separation
 into two modules. Add support for several new ideapad laptops and
 silead-based tablets. Various minor fixes and const cleanups.
 
 sony-laptop:
  - constify attribute_group and input index array
 
 fujitsu-laptop:
  - rework debugging
  - do not evaluate ACPI _INI methods
  - do not update ACPI device power status
  - sanitize hotkey input device identification
  - use strcpy to set ACPI device names and classes
  - remove redundant safety checks
  - use device-specific data in remaining module code
  - use device-specific data in LED-related code
  - explicitly pass ACPI device to call_fext_func()
  - track the last instantiated FUJ02E3 ACPI device
  - allocate fujitsu_laptop in acpi_fujitsu_laptop_add()
  - use device-specific data in backlight code
  - allocate fujitsu_bl in acpi_fujitsu_bl_add()
  - distinguish current uses of device-specific data
 
 msi-laptop:
  - constify msipf*_attribute_group
 
 eeepc-laptop:
  - constify platform_attribute_group
 
 toshiba_haps:
  - constify haps_attr_group
 
 dell-wmi-led:
  - Adjust instance of wmi_evaluate_method calls to 0
 
 alienware-wmi:
  - Adjust instance of wmi_evaluate_method calls to 0
 
 intel_menlow:
  - Add const to thermal_cooling_device_ops structure
 
 acerhdf:
  - Add const to thermal_cooling_device_ops structure
 
 dell-laptop:
  - Fix bogus keyboard backlight sysfs interface
 
 acer-wmi:
  - Using zero as first WMI instance number
  - Detect RF Button capability
 
 ideapad-laptop:
  - Add Y720-15IKBN to no_hw_rfkill
  - Add Y520-15IKBN to no_hw_rfkill
  - constify rfkill_ops structure
  - Squelch ACPI event 1
  - hide unused 'touchpad_store'
  - Switch touchpad attribute to be RO
  - Add sysfs interface for touchpad state
 
 silead_dmi:
  - Add touchscreen info for PoV mobii wintab p800w
  - Add touchscreen info for Pipo W2S tablet
  - Add touchscreen info for GP-electronic T701
 
 dell-rbtn:
  - constify rfkill_ops structures
  - Improve explanation about DELLABC6
 
 samsung-laptop:
  - constify rfkill_ops structures
 
 panasonic-laptop:
  - remove unused code
 
 samsung-laptop:
  - Initialize loca variable
 
 dell-wmi:
  - Convert to the WMI bus infrastructure
  - Add a better description for "stealth mode"
  - Add a comment explaining the 0xb2 magic number
 
 wmi-bmof:
  - New driver to expose embedded Binary WMI MOF metadata
 
 wmi*:
  - Fix printing info about WDG structure
  - Add recent copyright statements
  - Require query for data blocks, rename writable to setable
  - Add an interface for subdrivers to access sibling devices
  - Bind the platform device, not the ACPI node
  - Add a new interface to read block data
  - Incorporate acpi_install_notify_handler
  - Instantiate all devices before adding them
  - Probe data objects for read and write capabilities
  - Split devices into types and add basic sysfs attributes
  - Fix error handling when creating devices
  - Turn WMI into a bus driver
  - Track wmi devices per ACPI device
  - Clean up acpi_wmi_add
  - Pass the acpi_device through to parse_wdg
  - Drop "Mapper (un)loaded" messages
 
 intel_cht_int33fe:
  - Set supplied-from property on max17047 dev
 
 intel_pmc_ipc:
  - Mark ipc_data_readb() as __maybe_unused
 
 topstar-laptop:
  - Add new device id
 
 peaq-wmi:
  - Add new peaq-wmi driver
 
 thinkpad_acpi:
  - Add a comment about 0 in module_param_call()
  - Join string literals back
 
 toshiba_acpi:
  - use memdup_user_nul
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJZXSzcAAoJEKbMaAwKp364hSEIAKC0xJRZWv1aI1f69JCSZR0+
 5/6tMsps9nK4LtaKQCvPHeOCxmwpE4tZYzyuYHyHW+pfUMquIdRVQRMe3u2FTrKS
 HuvCgmYAkZqCzy/zQIPaVU2K9m7/9HubXYy0Q1qkjlGZp/IYMFoeo7DU65Ajm+HS
 wrRXIYIKSbjAU0pmzW//MFauEi26MWpAHMraw+HCJbXcGwhokSrtTYitqFpQXnhJ
 kdguSkEluW1NoG3Tv7CbfXWXge7zwxlrmI06b4FtkpFK6b2LCZcYeUhIn33yNYT1
 IwhNOsaWlxNw3K3c1IRZSwYoJ6dmBJ+cxmZ0sd3cr8jahgpHB/nJiRElHmTdf2M=
 =PbWU
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v4.13-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:
 "Introduce new bus architecture for WMI and expose BMOF data through
  sysfs. Correct several assumptions about WMI instance number from 1 to
  0. Further fujitsu-laptop cleanups, continuing to prepare for
  separation into two modules. Add support for several new ideapad
  laptops and silead-based tablets. Various minor fixes and const
  cleanups.

  Detail summary:

  sony-laptop:
   - constify attribute_group and input index array

  fujitsu-laptop:
   - rework debugging
   - do not evaluate ACPI _INI methods
   - do not update ACPI device power status
   - sanitize hotkey input device identification
   - use strcpy to set ACPI device names and classes
   - remove redundant safety checks
   - use device-specific data in remaining module code
   - use device-specific data in LED-related code
   - explicitly pass ACPI device to call_fext_func()
   - track the last instantiated FUJ02E3 ACPI device
   - allocate fujitsu_laptop in acpi_fujitsu_laptop_add()
   - use device-specific data in backlight code
   - allocate fujitsu_bl in acpi_fujitsu_bl_add()
   - distinguish current uses of device-specific data

  msi-laptop:
   - constify msipf*_attribute_group

  eeepc-laptop:
   - constify platform_attribute_group

  toshiba_haps:
   - constify haps_attr_group

  dell-wmi-led:
   - Adjust instance of wmi_evaluate_method calls to 0

  alienware-wmi:
   - Adjust instance of wmi_evaluate_method calls to 0

  intel_menlow:
   - Add const to thermal_cooling_device_ops structure

  acerhdf:
   - Add const to thermal_cooling_device_ops structure

  dell-laptop:
   - Fix bogus keyboard backlight sysfs interface

  acer-wmi:
   - Using zero as first WMI instance number
   - Detect RF Button capability

  ideapad-laptop:
   - Add Y720-15IKBN to no_hw_rfkill
   - Add Y520-15IKBN to no_hw_rfkill
   - constify rfkill_ops structure
   - Squelch ACPI event 1
   - hide unused 'touchpad_store'
   - Switch touchpad attribute to be RO
   - Add sysfs interface for touchpad state

  silead_dmi:
   - Add touchscreen info for PoV mobii wintab p800w
   - Add touchscreen info for Pipo W2S tablet
   - Add touchscreen info for GP-electronic T701

  dell-rbtn:
   - constify rfkill_ops structures
   - Improve explanation about DELLABC6

  samsung-laptop:
   - constify rfkill_ops structures

  panasonic-laptop:
   - remove unused code

  samsung-laptop:
   - Initialize loca variable

  dell-wmi:
   - Convert to the WMI bus infrastructure
   - Add a better description for "stealth mode"
   - Add a comment explaining the 0xb2 magic number

  wmi-bmof:
   - New driver to expose embedded Binary WMI MOF metadata

  wmi*:
   - Fix printing info about WDG structure
   - Add recent copyright statements
   - Require query for data blocks, rename writable to setable
   - Add an interface for subdrivers to access sibling devices
   - Bind the platform device, not the ACPI node
   - Add a new interface to read block data
   - Incorporate acpi_install_notify_handler
   - Instantiate all devices before adding them
   - Probe data objects for read and write capabilities
   - Split devices into types and add basic sysfs attributes
   - Fix error handling when creating devices
   - Turn WMI into a bus driver
   - Track wmi devices per ACPI device
   - Clean up acpi_wmi_add
   - Pass the acpi_device through to parse_wdg
   - Drop "Mapper (un)loaded" messages

  intel_cht_int33fe:
   - Set supplied-from property on max17047 dev

  intel_pmc_ipc:
   - Mark ipc_data_readb() as __maybe_unused

  topstar-laptop:
   - Add new device id

  peaq-wmi:
   - Add new peaq-wmi driver

  thinkpad_acpi:
   - Add a comment about 0 in module_param_call()
   - Join string literals back

  toshiba_acpi:
   - use memdup_user_nul"

* tag 'platform-drivers-x86-v4.13-1' of git://git.infradead.org/linux-platform-drivers-x86: (67 commits)
  platform/x86: sony-laptop: constify attribute_group and input index array
  platform/x86: fujitsu-laptop: rework debugging
  platform/x86: fujitsu-laptop: do not evaluate ACPI _INI methods
  platform/x86: fujitsu-laptop: do not update ACPI device power status
  platform/x86: fujitsu-laptop: sanitize hotkey input device identification
  platform/x86: fujitsu-laptop: use strcpy to set ACPI device names and classes
  platform/x86: fujitsu-laptop: remove redundant safety checks
  platform/x86: msi-laptop: constify msipf*_attribute_group
  platform/x86: eeepc-laptop: constify platform_attribute_group
  platform/x86: toshiba_haps: constify haps_attr_group
  platform/x86: dell-wmi-led: Adjust instance of wmi_evaluate_method calls to 0
  platform/x86: alienware-wmi: Adjust instance of wmi_evaluate_method calls to 0
  platform/x86: intel_menlow: Add const to thermal_cooling_device_ops structure
  platform/x86: acerhdf: Add const to thermal_cooling_device_ops structure
  platform/x86: dell-laptop: Fix bogus keyboard backlight sysfs interface
  platform/x86: acer-wmi: Using zero as first WMI instance number
  platform/x86: ideapad-laptop: Add Y720-15IKBN to no_hw_rfkill
  platform/x86: ideapad-laptop: Add Y520-15IKBN to no_hw_rfkill
  platform/x86: silead_dmi: Add touchscreen info for PoV mobii wintab p800w
  platform/x86: silead_dmi: Add touchscreen info for Pipo W2S tablet
  ...
2017-07-06 15:33:27 -07:00
Andy Shevchenko 5e8f42aa49 platform/x86: ideapad-laptop: Fix indentation in DMI table
There are couple of places where 8 spaces are used instead of tabs.
Replace former by latter. No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-05 11:26:55 -07:00
Yang Jiaxun 710c059c24 platform/x86: ideapad-laptop: Add several models to no_hw_rfkill
Some Lenovo ideapad models do not have hardware rfkill switches, but
trying to read the rfkill switches through the ideapad-laptop module.
It caused to always reported blocking breaking wifi.

Fix it by adding those models to no_hw_rfkill_list.

Signed-off-by: Yang Jiaxun <yjx@flygoat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-05 11:26:54 -07:00
Sven Eckelmann 0df4b805cb platform/x86: ideapad-laptop: Add IdeaPad V510-15IKB to no_hw_rfkill
Like other Lenovo models the IdeaPad V510-15IKB does not have an hw
rfkill switch. This results in hard-blocked radios after boot, resulting
in always blocked radios rendering them unusable.

Add the IdeaPad V510-15IKB to the no_hw_rfkill DMI list and allows using
the built-in radios.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-05 11:26:54 -07:00