Commit Graph

177 Commits

Author SHA1 Message Date
Julia Lawall 2bb129ebb2 dmaengine: ioatdma: constify dca_ops structures
The dca_ops structure is never modified, so declare it as const.

Done with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-11-16 09:27:32 +05:30
Dave Jiang d3cd63f91b dmaengine: IOATDMA: Cleanup pre v3.0 chansts register reads
Remove pre-3.0 channel status reads. 3.0 and later chansts register
is 64bit and can be read 64bit. This was clarified with the hardware
architects and since the driver now only support 3.0+ we don't need the
legacy support

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-11-16 09:10:46 +05:30
Dave Jiang 4222a90743 dmaengine: ioatdma: add PCIe AER handlers
Adding AER handlers in order to handle any PCIe errors.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-21 21:10:05 +05:30
Dave Jiang ad4a7b5065 dmaengine: ioatdma: adding shutdown support
The ioatdma needs to be queisced and block all additional op submission
during reboots. When NET_DMA was used, this caused issue as ops were still
being sent to ioatdma during reboots even though PCI BME has been turned
off. Even though NET_DMA has been deprecated, we need to prevent similar
situations. The shutdown handler should address that.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-21 21:10:05 +05:30
Dave Jiang ab98193dac dmaengine: ioatdma: add Broadwell EP ioatdma PCI dev IDs
Adding the Broadwell Xeon ioatdma PCI device IDs and
related bits. This is still IOATDMA 3.2 based hw.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-28 10:06:06 +05:30
Dave Jiang 7b7d0ca777 dmaengine: ioatdma: Fix variable array length
Sparse reported:
drivers/dma/ioat/prep.c:637:27: sparse: Variable length array is used.

Assigning a static value for the array.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-26 07:53:58 +05:30
Dave Jiang 5c65cb93a3 dmaengine: ioatdma: fix sparse "error" with prep lock
The prep lock gets acquired in ioat_check_space_lock and released in
ioat_tx_submit_unlock. Setting the annotations so sparse does not freak out.

drivers/dma/ioat/dma.c:273:30: sparse: context imbalance in 'ioat_tx_submit_unlock' - unexpected unlock
drivers/dma/ioat/dma.c:476:5: sparse: context imbalance in 'ioat_check_space_lock' - wrong count at exit

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-26 07:53:58 +05:30
Dave Jiang 64f1d0ffba dmaengine: ioatdma: fix coccinelle warning
Simplifying the end return. This existed in the original code but was
flagged when refactoring of the code made it appear it's new.

coccinelle warnings: (new ones prefixed by >>)

>> drivers/dma/ioat/init.c:1018:1-3: WARNING: end returns can be simpified

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-21 14:04:24 +05:30
Dave Jiang 09659a5978 dmaengine: ioatdma: Clean up IOAT_COMPLETION_PENDING flag
IOAT_COMPLETION_PENDING flag was deprecated for v2 and v3 drivers but was
not cleaned up. Doing that now. The commit deprecated this flag was
4dec23d7 ioatdma: fix race between updating ioat->head and
IOAT_COMPLETION_PENDING.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-17 13:37:31 +05:30
Dave Jiang c7b0e8d7b5 dmaengine: ioatdma: fixup kernel doc errors from dma.h
./scripts/kerne-doc is reporting errors on dma.h. Clean up all reported
errors.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-17 13:37:31 +05:30
Dave Jiang ef97bd0f59 dmanegine: ioatdma: remove function ptrs in ioatdma_device
Since we are a "single" device driver now we no longer require the function
pointers in ioatdma_device. Remove.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-17 13:37:30 +05:30
Dave Jiang 3372de5813 dmaengine: ioatdma: removal of dma_v3.c and relevant ioat3 references
Moving the relevant functions to their respective .c files and removal of
dma_v3.c file. Also removed various ioat3 references when appropriate.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-17 13:37:30 +05:30
Dave Jiang 599d49de7f dmaengine: ioatdma: move dma prep functions to single location
Move all DMA descriptor prepping functions to prep.c file. Fixup all
broken bits caused by the move.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-17 13:37:30 +05:30
Dave Jiang c0f28ce66e dmaengine: ioatdma: move all the init routines
Moving all the init routines to init.c and fixup anything broken during
the move.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-17 13:37:30 +05:30
Dave Jiang 80b1973659 dmaengine: ioatdma: move all sysfs related code
Move and fixup all sysfs related bits to sysfs.c file.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-17 13:37:30 +05:30
Dave Jiang 885b201056 dmaengine: ioatdma: remove dma_v2.*
Clean out dma_v2 and remove ioat2 calls since we are moving everything
to just ioat.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-17 13:37:30 +05:30
Dave Jiang 55f878ec47 dmaengine: ioatdma: fixup ioatdma_device namings
Changing the variable names for ioatdma_device to be consistently named
ioat_dma instead of device/dma in order to avoid confusion and distinct
from struct device. This will clearly indicate that it is an
ioatdma_device. This also make all the naming consistent that the dma
device is ioat_dma and all the channels are ioat_chan.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-17 13:37:30 +05:30
Dave Jiang 5a976888c9 dmaengine: ioatdma: clean up local dma channel data structure
Kill the common ioatdma channel structure and everything that is not
dma_chan to be ioat_dma_chan. Since we don't have to worry about v1
and v2 ioatdma anymore this makes it much cleaner and obvious for
maintenance.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-17 13:37:30 +05:30
Dave Jiang 7f832645d0 dmaengine: ioatdma: remove ioatdma v2 registration
Removal of support for ioatdma v2 device support.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-17 13:37:30 +05:30
Dave Jiang 85596a1947 dmaengine: ioatdma: remove ioat1 specific code
Cleaning up of ioat1 specific code as it is no longer supported

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-17 13:37:30 +05:30
Dave Jiang d73f277b32 dmaengine: ioatdma: deprecating and removal of old ioatdma devices
Removal of any devices that are ioatdma pre-3.0. This is the first step
in attempting to clean up the ioatdma driver and remove hw no longer
supported.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-17 13:37:29 +05:30
Allen Hubbe 5484526ac1 dmaengine: ioatdma: fix u16 overflow in cleanup
If the allocation order is 16, then the u16 count will overflow and wrap
to zero when assigned the value 1 << 16.

Change the type of 'total_descs' to int, so that it is large enough to
store a value equal or greater than 1 << 16.

Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-17 13:35:58 +05:30
Allen Hubbe 870ce49022 dmaengine: ioatdma: fix u16 overflow in reshape
If the allocation order is 16, then the u16 index will overflow and wrap
to zero instead of being equal or greater than 1 << 16.  The loop
condition will always be true, and the loop will run until all the
memory resources are depleted.

Change the type of index 'i' to u32, so that it is large enough to store
a value equal or greater than 1 << 16.

Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-17 13:35:58 +05:30
Jiang Liu b6c52c6345 dmaengine: ioatdma: Ignore IOAT devices under hotplug-capable PCI host bridge
The dmaengine core assumes that async DMA devices will only be removed
when they not used anymore, or it assumes dma_async_device_unregister()
will only be called by dma driver exit routines. But this assumption is
not true for the IOAT driver, which calls dma_async_device_unregister()
from ioat_remove(). So current IOAT driver doesn't support device
hot-removal because it may cause system crash to hot-remove an inuse
IOAT device.

To support CPU socket hot-removal, all PCI devices, including IOAT
devices embedded in the socket, will be hot-removed. The idea solution
is to enhance the dmaengine core and IOAT driver to support hot-removal,
but that's too hard.

This patch implements a hack to disable IOAT devices under hotplug-capable
CPU socket so it won't break socket hot-removal.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-07-16 18:28:28 +05:30
Dave Jiang 7618d0359c dmaengine: ioatdma: Set non RAID channels to be private capable
This allows claiming of non-RAID channels as a private channel. This
prevents breakage of MDRAID using the IOATDMA channels via
async_tx but also allows agents such as NTB to claim channels
exclusively for its usages.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-07-07 09:54:32 +05:30
Linus Torvalds d6a4c0e5d3 Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine updates from Vinod Koul:

 - new drivers for:
        - Ingenic JZ4780 controller
        - APM X-Gene controller
        - Freescale RaidEngine device
        - Renesas USB Controller

  - remove device_alloc_chan_resources dummy handlers

  - sh driver cleanups for peri peri and related emmc and asoc patches
    as well

  - fixes and enhancements spread over the drivers

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (59 commits)
  dmaengine: dw: don't prompt for DW_DMAC_CORE
  dmaengine: shdmac: avoid unused variable warnings
  dmaengine: fix platform_no_drv_owner.cocci warnings
  dmaengine: pch_dma: fix memory leak on failure path in pch_dma_probe()
  dmaengine: at_xdmac: unlock spin lock before return
  dmaengine: xgene: devm_ioremap() returns NULL on error
  dmaengine: xgene: buffer overflow in xgene_dma_init_channels()
  dmaengine: usb-dmac: Fix dereferencing freed memory 'desc'
  dmaengine: sa11x0: report slave capabilities to upper layers
  dmaengine: vdma: Fix compilation warnings
  dmaengine: fsl_raid: statify fsl_re_chan_probe
  dmaengine: Driver support for FSL RaidEngine device.
  dmaengine: xgene_dma_init_ring_mngr() can be static
  Documentation: dma: Add documentation for the APM X-Gene SoC DMA device DTS binding
  arm64: dts: Add APM X-Gene SoC DMA device and DMA clock DTS nodes
  dmaengine: Add support for APM X-Gene SoC DMA engine driver
  dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver
  dmaengine: renesas,usb-dmac: Add device tree bindings documentation
  dmaengine: edma: fixed wrongly initialized data parameter to the edma callback
  dmaengine: ste_dma40: fix implicit conversion
  ...
2015-04-24 09:49:37 -07:00
Jarkko Nikula 3b62286d0e dmaengine: Remove FSF mailing addresses
Free Software Foundation mailing address has been moved in the past and some
of the addresses here are outdated. Remove them from file headers since the
COPYING file in the kernel sources includes it.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-16 22:28:15 +05:30
Dave Jiang 9ca1c5f2ab dmaengine: ioatdma: workaround for incorrect DMACAP register
BDX-DE IOATDMA reports incorrect DMACAP register for PQ related
ops. Ignoring those bits.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-05 14:32:02 +05:30
Nicholas Mc Guire 12385f458a ioat: fail self-test if wait_for_completion times out
wait_for_completion_timeout reaching timeout was being ignored,
fail the self-test if timeout condition occurs.

v2: fixup of coding style issues.

Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-04 22:54:22 -08:00
Dave Jiang 68a8cc9e9e ioatdma: Adding support for BDX-DE ioatdma.
Adding PCI device IDs and hooks in workarounds for Broadwell DE ioatdma.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-03 17:47:40 -08:00
Dave Jiang abf538ae03 dmaengine: ioatdma: PQ err descriptors should callback with err results
The err completion callback is missing from the error handler. Two
reasons we never hit this. On Xeon because the hw err workaround, the
completion happens on a NULL descriptor so we don't do callback on the
PQ descriptor. On Atom we have DWBES support and thus the callback already
happened or we don't halt on error, so that was take cared of. But this code
needs to be corrected for future error handlers.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22 12:22:56 +05:30
Prarit Bhargava 4ff2fd839c dmaengine: ioatdma: fix dma mapping errors
Several systems are showing the following stack trace:

WARNING: CPU: 0 PID: 2352 at lib/dma-debug.c:1140 check_unmap+0x4ee/0x9e0()
ioatdma 0000:00:04.0: DMA-API: device driver failed to check map error[device address=0x0000000465bad000] [size=4096 bytes] [mapped as page]
Modules linked in: ioatdma(E+) nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache cfg80211 rfkill x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel cdc_ether ses ghash_clmulni_intel usbnet mii enclosure aesni_intel lrw gf128mul glue_helper iTCO_wdt shpchp ablk_helper iTCO_vendor_support cryptd pcspkr ipmi_devintf sb_edac lpc_ich edac_core mfd_core ipmi_si i2c_i801 wmi ipmi_msghandler nfsd auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sd_mod crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt drm_kms_helper ttm igb drm ptp pps_core dca i2c_algo_bit i2ccore megaraid_sas dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ioatdma]
CPU: 0 PID: 2352 Comm: insmod Tainted: G            E  3.17.0-rc4+ #14
Hardware name: HP ProLiant m300 Server Cartridge/, BIOS H02 01/30/2014
 0000000000000009 ffff88007994b7d8 ffffffff816e7225 ffff88007994b820
 ffff88007994b810 ffffffff8107e51d ffff88045fc56c00 ffff88046643ee90
 ffffffff8338ccd0 0000000000000286 ffffffff81956629 ffff88007994b870
Call Trace:
 [<ffffffff816e7225>] dump_stack+0x4d/0x66
 [<ffffffff8107e51d>] warn_slowpath_common+0x7d/0xa0
 [<ffffffff8107e58c>] warn_slowpath_fmt+0x4c/0x50
 [<ffffffff81381e6e>] check_unmap+0x4ee/0x9e0
 [<ffffffff813823bf>] debug_dma_unmap_page+0x5f/0x70
 [<ffffffffa04546d8>] ioat_xor_val_self_test+0x498/0xcf0 [ioatdma]
 [<ffffffff81204f0a>] ? kfree+0xda/0x2b0
 [<ffffffffa044d510>] ? ioat_dma_setup_interrupts+0x120/0x2d0 [ioatdma]
 [<ffffffffa0454f4e>] ioat3_dma_self_test+0x1e/0x30 [ioatdma]
 [<ffffffffa044f904>] ioat_probe+0xf4/0x110 [ioatdma]
 [<ffffffffa04550f8>] ioat3_dma_probe+0x198/0x3a0 [ioatdma]
 [<ffffffffa044d18e>] ioat_pci_probe+0x11e/0x1b0 [ioatdma]
 [<ffffffff81393a15>] local_pci_probe+0x45/0xa0
 [<ffffffff81394be5>] ? pci_match_device+0xe5/0x110
 [<ffffffff81394d29>] pci_device_probe+0xd9/0x130
 [<ffffffff81462860>] driver_probe_device+0x90/0x3c0
 [<ffffffff81462c63>] __driver_attach+0x93/0xa0
 [<ffffffff81462bd0>] ? __device_attach+0x40/0x40
 [<ffffffff8146080b>] bus_for_each_dev+0x6b/0xb0
 [<ffffffff814622ce>] driver_attach+0x1e/0x20
 [<ffffffff81461ed8>] bus_add_driver+0x188/0x260
 [<ffffffffa0423000>] ? 0xffffffffa0423000
 [<ffffffff81463734>] driver_register+0x64/0xf0
 [<ffffffff813933a0>] __pci_register_driver+0x60/0x70
 [<ffffffffa0423089>] ioat_init_module+0x89/0x1000 [ioatdma]
 [<ffffffff8100212c>] do_one_initcall+0xbc/0x200
 [<ffffffff811e8b22>] ? __vunmap+0xd2/0x120
 [<ffffffff8111e73c>] load_module+0x14ec/0x1b50
 [<ffffffff81119970>] ? store_uevent+0x40/0x40
 [<ffffffff8111ef36>] SyS_finit_module+0x86/0xb0
 [<ffffffff816f1469>] system_call_fastpath+0x16/0x1b
---[ end trace 1052ccbbc3db4d08 ]---
Mapped at:
 [<ffffffff81380be1>] debug_dma_map_page+0x91/0x140
 [<ffffffffa045440e>] ioat_xor_val_self_test+0x1ce/0xcf0 [ioatdma]
 [<ffffffffa0454f4e>] ioat3_dma_self_test+0x1e/0x30 [ioatdma]
 [<ffffffffa044f904>] ioat_probe+0xf4/0x110 [ioatdma]
 [<ffffffffa04550f8>] ioat3_dma_probe+0x198/0x3a0 [ioatdma]

This happens because the current ioatdma DMA test code does not check the return
value of dma_map_page() calls with dma_mapping_error().  In addition, it was
noticed that mapping for the variable dest_dma is free'd before the last use.

This patch fixes these errors by initializing the dma_srcs[] array and checking
the returns with dma_mapping_error().

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-09 14:52:05 +05:30
Dan Williams 7bced39751 net_dma: simple removal
Per commit "77873803363c net_dma: mark broken" net_dma is no longer used
and there is no plan to fix it.

This is the mechanical removal of bits in CONFIG_NET_DMA ifdef guards.
Reverting the remainder of the net_dma induced changes is deferred to
subsequent patches.

Marked for stable due to Roman's report of a memory leak in
dma_pin_iovec_pages():

    https://lkml.org/lkml/2014/9/3/177

Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: David Whipple <whipple@securedatainnovations.ch>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: <stable@vger.kernel.org>
Reported-by: Roman Gushchin <klamm@yandex-team.ru>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2014-09-28 07:05:16 -07:00
Manuel Schölling e628ce70ca ioat: Use time_before_jiffies()
To be future-proof and for better readability the time comparisons are modified
to use time_before_jiffies() instead of plain, error-prone math.

Signed-off-by: Manuel Schölling <manuel.schoelling@gmx.de>
[djbw: use time_before_jiffies() to make argument order more clear]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2014-08-21 11:39:22 -07:00
Alexander Gordeev 368da992b9 ioat: Use pci_enable_msix_exact() instead of pci_enable_msix()
As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range()  or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.

Function pci_enable_msix() returns a tri-state value while
pci_enable_msi_exact() is a canonical zero/-errno variant.
The former is being phased out in favor of the latter.
In case of 'ioat' there (should be) no difference.

Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2014-04-10 12:17:35 -07:00
Rashika 2358b820d4 drivers: dma: Include appropriate header file in dca.c
Includes an appropriate header file dma_v2.h in ioat/dca.c because
functions ioat2_dca_init() and ioat3_dca_init() have their function
declarations in dma_v2.h.

This eliminates the following warning in ioat/dca.c:
drivers/dma/ioat/dca.c:410:22: warning: no previous prototype for ‘ioat2_dca_init’ [-Wmissing-prototypes]
drivers/dma/ioat/dca.c:624:22: warning: no previous prototype for ‘ioat3_dca_init’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2014-04-10 12:17:35 -07:00
Rashika 8d1d32767c drivers: dma: Mark functions as static in dma_v3.c
Mark the functions ioat3_prep_xor_val(), ioat3_prep_pq_val() and
ioat3_prep_pqxor_val() as static in dma_v3.c because they are not used
outside this file.

This eliminates the following warnings in dma_v3.c:
drivers/dma/ioat/dma_v3.c:741:1: warning: no previous prototype for ‘ioat3_prep_xor_val’ [-Wmissing-prototypes]
drivers/dma/ioat/dma_v3.c:1092:1: warning: no previous prototype for ‘ioat3_prep_pq_val’ [-Wmissing-prototypes]
drivers/dma/ioat/dma_v3.c:1134:1: warning: no previous prototype for ‘ioat3_prep_pqxor_val’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2014-04-10 12:17:35 -07:00
Yijing Wang 1fde254846 ioat/dca: Use dev_is_pci() to check whether it is pci device
Use PCI standard marco dev_is_pci() instead of directly compare
pci_bus_type to check whether it is pci device.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2014-04-10 12:17:34 -07:00
Dan Williams da87ca4d4c ioat: fix tasklet tear down
Since commit 7787380336 "net_dma: mark broken" we no longer pin dma
engines active for the network-receive-offload use case.  As a result
the ->free_chan_resources() that occurs after the driver self test no
longer has a NET_DMA induced ->alloc_chan_resources() to back it up.  A
late firing irq can lead to ksoftirqd spinning indefinitely due to the
tasklet_disable() performed by ->free_chan_resources().  Only
->alloc_chan_resources() can clear this condition in affected kernels.

This problem has been present since commit 3e037454bc "I/OAT: Add
support for MSI and MSI-X" in 2.6.24, but is now exposed. Given the
NET_DMA use case is deprecated we can revisit moving the driver to use
threaded irqs.  For now, just tear down the irq and tasklet properly by:

1/ Disable the irq from triggering the tasklet

2/ Disable the irq from re-arming

3/ Flush inflight interrupts

4/ Flush the timer

5/ Flush inflight tasklets

References:
https://lkml.org/lkml/2014/1/27/282
https://lkml.org/lkml/2014/2/19/672

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Reported-by: Mike Galbraith <bitbucket@online.de>
Reported-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Tested-by: Mike Galbraith <bitbucket@online.de>
Tested-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2014-02-25 09:44:20 -08:00
Jiang Liu 3532e5660f drivers/dma/ioat/dma.c: check DMA mapping error in ioat_dma_self_test()
Check DMA mapping return values in function ioat_dma_self_test() to get
rid of following warning message.

  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 1203 at lib/dma-debug.c:937 check_unmap+0x4c0/0x9a0()
  ioatdma 0000:00:04.0: DMA-API: device driver failed to check map error[device address=0x000000085191b000] [size=2000 bytes] [mapped as single]
  Modules linked in: ioatdma(+) mac_hid wmi acpi_pad lp parport hidd_generic usbhid hid ixgbe isci dca libsas ahci ptp libahci scsi_transport_sas meegaraid_sas pps_core mdio
  CPU: 0 PID: 1203 Comm: systemd-udevd Not tainted 3.13.0-rc4+ #8
  Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIIN1.86B.0044.L09.1311181644 11/18/2013
  Call Trace:
    dump_stack+0x4d/0x66
    warn_slowpath_common+0x7d/0xa0
    warn_slowpath_fmt+0x4c/0x50
    check_unmap+0x4c0/0x9a0
    debug_dma_unmap_page+0x81/0x90
    ioat_dma_self_test+0x3d2/0x680 [ioatdma]
    ioat3_dma_self_test+0x12/0x30 [ioatdma]
    ioat_probe+0xf4/0x110 [ioatdma]
    ioat3_dma_probe+0x268/0x410 [ioatdma]
    ioat_pci_probe+0x122/0x1b0 [ioatdma]
    local_pci_probe+0x45/0xa0
    pci_device_probe+0xd9/0x130
    driver_probe_device+0x171/0x490
    __driver_attach+0x93/0xa0
    bus_for_each_dev+0x6b/0xb0
    driver_attach+0x1e/0x20
    bus_add_driver+0x1f8/0x2b0
    driver_register+0x81/0x110
    __pci_register_driver+0x60/0x70
    ioat_init_module+0x89/0x1000 [ioatdma]
    do_one_initcall+0xe2/0x250
    load_module+0x2313/0x2a00
    SyS_init_module+0xd9/0x130
    system_call_fastpath+0x1a/0x1f
  ---[ end trace 990c591681d27c31 ]---
  Mapped at:
    debug_dma_map_page+0xbe/0x180
    ioat_dma_self_test+0x1ab/0x680 [ioatdma]
    ioat3_dma_self_test+0x12/0x30 [ioatdma]
    ioat_probe+0xf4/0x110 [ioatdma]
    ioat3_dma_probe+0x268/0x410 [ioatdma]

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-02 14:40:30 -08:00
Vinod Koul df12a3178d Merge commit 'dmaengine-3.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine
Pull dmaengine changes from Dan

1/ Bartlomiej and Dan finalized a rework of the dma address unmap
   implementation.

2/ In the course of testing 1/ a collection of enhancements to dmatest
   fell out.  Notably basic performance statistics, and fixed / enhanced
   test control through new module parameters 'run', 'wait', 'noverify',
   and 'verbose'.  Thanks to Andriy and Linus for their review.

3/ Testing the raid related corner cases of 1/ triggered bugs in the
   recently added 16-source operation support in the ioatdma driver.

4/ Some minor fixes / cleanups to mv_xor and ioatdma.

Conflicts:
	drivers/dma/dmatest.c

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-16 12:02:36 +05:30
Dan Williams 779e561ae2 ioat: fix ioat3_irq_reinit
The implementation of ioat3_irq_reinit has two bugs:

1/ The mode is incorrectly set to MSIX for the MSI case

2/ The 'dev_id' parameter to free_irq is the ioatdma_device not the channel in
   the msi and intx case

Include a small cleanup to clarify that ioat3_irq_reinit is only for bwd
hardware

Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:42 -08:00
Dan Williams 4c5d9619e0 ioat: kill msix_single_vector support
Once we have determined that we will not have all of our desired msix
vectors there is no point in attempting a single msix allocation.  The
driver will already need to read registers to determine the source of
the interrupt the fact that it is msix is moot.  Fallback directly to
msi.

Reported-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:42 -08:00
Dan Williams 59056e85d7 ioatdma: clean up sed pool kmem_cache
Use a single cache for all sed allocations.  No need to make it per
channel.  This also avoids the slub_debug warnings for multiple caches
with the same name.

Switching to dmam_pool_create() to fix leaking the dma pools on
initialization failure and lets us kill ioat3_dma_remove().

Cc: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:41 -08:00
Dan Williams 21e96c7313 ioatdma: fix selection of 16 vs 8 source path
When performing continuations there are implied sources that need to be
added to the source count. Quoting dma_set_maxpq:

/* dma_maxpq - reduce maxpq in the face of continued operations
 * @dma - dma device with PQ capability
 * @flags - to check if DMA_PREP_CONTINUE and DMA_PREP_PQ_DISABLE_P are set
 *
 * When an engine does not support native continuation we need 3 extra
 * source slots to reuse P and Q with the following coefficients:
 * 1/ {00} * P : remove P from Q', but use it as a source for P'
 * 2/ {01} * Q : use Q to continue Q' calculation
 * 3/ {00} * Q : subtract Q from P' to cancel (2)
 *
 * In the case where P is disabled we only need 1 extra source:
 * 1/ {01} * Q : use Q to continue Q' calculation
 */

...fix the selection of the 16 source path to take these implied sources
into account.

Note this also kills the BUG_ON(src_cnt < 9) check in
__ioat3_prep_pq16_lock().  Besides not accounting for implied sources
the check is redundant given we already made the path selection.

Cc: <stable@vger.kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:41 -08:00
Dan Williams 5d48b9b5d8 ioatdma: fix sed pool selection
The array to lookup the sed pool based on the number of sources
(pq16_idx_to_sedi) is 16 entries and expects a max source index.
However, we pass the total source count which runs off the end of the
array when src_cnt == 16.  The minimal fix is to just pass src_cnt-1,
but given we know the source count is > 8 we can just calculate the sed
pool by (src_cnt - 2) >> 3.

Cc: Dave Jiang <dave.jiang@intel.com>
Cc: <stable@vger.kernel.org>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:41 -08:00
Dave Jiang ac7d631f7d ioatdma: Fix bug in selftest after removal of DMA_MEMSET.
Commit 48a9db4 (3.11) removed the memset op in the xor selftest for ioatdma.
The issue is that with the removal of that op, it never replaced the memset
with a CPU memset. The memory being operated on is expected to be zeroes but
was not. This is causing the xor selftest to fail.

Cc: <stable@vger.kernel.org>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:41 -08:00
Bartlomiej Zolnierkiewicz 0776ae7b89 dmaengine: remove DMA unmap flags
Remove no longer needed DMA unmap flags:
- DMA_COMPL_SKIP_SRC_UNMAP
- DMA_COMPL_SKIP_DEST_UNMAP
- DMA_COMPL_SRC_UNMAP_SINGLE
- DMA_COMPL_DEST_UNMAP_SINGLE

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Jon Mason <jon.mason@intel.com>
Acked-by: Mark Brown <broonie@linaro.org>
[djbw: clean up straggling skip unmap flags in ntb]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:38 -08:00
Bartlomiej Zolnierkiewicz 54f8d501e8 dmaengine: remove DMA unmap from drivers
Remove support for DMA unmapping from drivers as it is no longer
needed (DMA core code is now handling it).

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[djbw: fix up chan2parent() unused warning in drivers/dma/dw/core.c]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:38 -08:00
Dan Williams d38a8c622a dmaengine: prepare for generic 'unmap' data
Add a hook for a common dma unmap implementation to enable removal of
the per driver custom unmap code.  (A reworked version of Bartlomiej
Zolnierkiewicz's patches to remove the custom callbacks and the size
increase of dma_async_tx_descriptor for drivers that don't care about
raid).

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
[bzolnier: prepare pl330 driver for adding missing unmap while at it]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-13 16:25:06 -08:00