Commit Graph

852 Commits

Author SHA1 Message Date
Vasily Khoruzhick 44832a71f3 ALSA: usb-audio: add front jack channel selector for EMU0204
Add support for front jack channel selector which is present on EMU0204.
It allows to get 4 channels out of this soundcard.

Tested-by: Yury Bushmelev <jay@jay-tech.ru>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-11-13 17:05:20 +01:00
Anssi Hannula 71373fddf6 ALSA: usb: Fix wrong mapping of RLC and RRC channels
According to USB Audio spec v2 bits 25 and 26 of bmChannelConfig are
"Back Left of Center - BLC" and "Back Right of Center - BRC",
respectively.

They are currently assigned to ALSA channels BLC/BRC. However, the ALSA
BLC/BRC are actually the rather nonsensical "bottom left center" and
"bottom right center", so the channels will be assigned wrongly. The
comments in the USB code are also similarly wrong, so this is not
readily apparent without looking at the actual specification.

Fix the channel mapping by mapping bits 25 and 26 to RLC (Rear Left
Center) and RRC (Rear Right Center), respectively, instead.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-11-11 17:06:57 +01:00
David Henningsson 504333df8b ALSA: usb - Don't trust the channel config if the channel count changed
In case the channel count of the input terminal is not the same as
the channel count of the streaming descriptor, the channel config of
the input terminal can not be trusted. Instead fall back to a default
(guessed) channel map.

This was found on a Logitech USB Headset.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-11-05 07:46:48 +01:00
David Henningsson e3e35f750f ALSA: usb - For class 2 devices, use channel map from altsettings
The channel config from the streaming descriptor is probably a
better indicator of the channel map than the input terminal.
Use the input terminal's channel map as fallback only.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-11-05 07:46:38 +01:00
David Henningsson 0dca01c37a ALSA: usb: supply channel maps even when wChannelConfig is unspecified
If wChannelconfig is given for some formats but not others, userspace
might not be able to set the channel map.

This is RFC because I'm not sure what the best behaviour is - to guess
the channel map from the given number of channels (it's quite likely
that one channel is MONO and two channels is FL FR), or just to supply
UNKNOWN for all channels.

But the complete lack of channel map for a format leads userspace to
believe that the format is not available at all. Or am I
misunderstanding how this should be used?

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-11-05 07:46:15 +01:00
Takashi Iwai 9b389a8a02 ALSA: 6fire: Fix probe of multiple cards
The probe code of snd-usb-6fire driver overrides the devices[] pointer
wrongly without checking whether it's already occupied or not.  This
would screw up the device disconnection later.

Spotted by coverity CID 141423.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-29 11:37:11 +01:00
Takashi Iwai 6913a9dbf1 ASoC: Updates for v3.13
- Further work on the dmaengine helpers, including support for
    configuring the parameters for DMA by reading the capabilities of the
    DMA controller which removes some guesswork and magic numbers fromm
    drivers.
  - A refresh of the documentation.
  - Conversions of many drivers to direct regmap API usage in order to
    allow the ASoC level register I/O code to be removed, this will
    hopefully be completed by v3.14.
  - Support for using async register I/O in DAPM, reducing the time taken
    to implement power transitions on systems that support it.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSajLdAAoJELSic+t+oim9MVEQAJ3t7df5K9R/OynjhKiEFxpP
 cBWo306CegZ5oO17UqG+SReJkOWgUI8zIUkNC818suTjtgyhv4WUBx1QgXG8akO5
 arHZEQGyReLxgWbnO5ScP7BJt5ZYldfQWN+NPnNlzwvVA8R4xChvAwuHL+kUSSYW
 DrOb0ag/Gtn2jQo3o9GbZb5c3UhZqoMg/pQSoVtnvG/O8N/xR0yoeXGsdJv1su6g
 OKhCJTRWU8v3FONatR2wWXnSrCBOeJ2Ec7YUJil1FQQdENYZfV3AOsFHxmqsyG2O
 Xj2P7CioY0JY7dtFcKjrXgsnjvgZmVdVsdegTJPWS9RjunjyupvSyhMhZYkoA60j
 V7RxyIbHAx7hILQqCYYhlOczYHom4MSwAGGt7y7T3oKt0432RvIjE2fP7sTGaqD8
 wzuVYuVl4km03xX9g9abF6xjyDE6e+4wun+d8kSvOosvd/nF47gkXUXEvPZh0Ley
 013e5fHNDaNF4uaSVXE169JyVxVnHP6nXJDRWZakXsryGXGUpn0quIzobf6fb6XE
 fY5Q3QoyP5rHdSMIvGN5Gi76KsHF5CWILWqcWLEVPLnaf9gJmrp3IypmF1c8i7VE
 CrcTim5mhNePEX56skRaHhpYHmsxYApSAzxNAA/t3cJ2rtwb87jMM4jOcjHi/war
 emSVe5lXkcwv/lU/Pa0N
 =rVsK
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.13

 - Further work on the dmaengine helpers, including support for
   configuring the parameters for DMA by reading the capabilities of the
   DMA controller which removes some guesswork and magic numbers fromm
   drivers.
 - A refresh of the documentation.
 - Conversions of many drivers to direct regmap API usage in order to
   allow the ASoC level register I/O code to be removed, this will
   hopefully be completed by v3.14.
 - Support for using async register I/O in DAPM, reducing the time taken
   to implement power transitions on systems that support it.
2013-10-25 11:43:47 +02:00
Takashi Iwai ac536a848a ALSA: us122l: Fix pcm_usb_stream mmapping regression
The pcm_usb_stream plugin requires the mremap explicitly for the read
buffer, as it expands itself once after reading the required size.
But the commit [314e51b9: mm: kill vma flag VM_RESERVED and
mm->reserved_vm counter] converted blindly to a combination of
VM_DONTEXPAND | VM_DONTDUMP like other normal drivers, and this
resulted in the failure of mremap().

For fixing this regression, we need to remove VM_DONTEXPAND for the
read-buffer mmap.

Reported-and-tested-by: James Miller <jamesstewartmiller@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-15 11:35:54 +02:00
Sachin Kamat 6b5a7c66ce ALSA: usb-audio: Use module_usb_driver
module_usb_driver makes code simpler by removing the boilerplate.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-09 14:00:34 +02:00
Takashi Iwai d820306cbe Merge branch 'for-linus' into for-next
For updating the HDMI chmap fix.

Conflicts:
	sound/pci/hda/patch_hdmi.c
2013-10-08 09:30:04 +02:00
Thomas Pugliese 6d5eba5aac ALSA: usb-audio: support wireless devices in snd_usb_parse_datainterval
This patch adds support for dev speed USB_SPEED_WIRELESS in
snd_usb_parse_datainterval which allows the usb sound core to create
ISO urbs with the correct number and size of buffers.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-07 12:52:21 +02:00
Thomas Pugliese df3774c5c5 ALSA: usb-audio: add support for wireless USB devices
This patch updates snd_usb_audio_create also support devices whose
speed == USB_SPEED_WIRELESS.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-07 12:51:54 +02:00
Eldad Zack 05c79b772f ALSA: usb-audio: remove unused endpoint flag EP_FLAG_ACTIVATED
EP_FLAG_ACTIVATED is never tested for, remove it.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-07 11:22:43 +02:00
Eldad Zack df23a2466a ALSA: usb-audio: rename alt_idx to altsetting
As Clemens Ladisch kindly explained:
 "Please note that there are two methods to identify alternate settings:
  the number, which is the value in bAlternateSetting, and the index,
  which is the index in the descriptor array.  There might be some wording
  in the USB spec that these two values must be the same, but in reality,
  [insert standard rant about firmware writers], bAlternateSetting
  must be treated as a random ID value."

This patch changes the name to express the correct usage semantics.
No functional change.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-07 11:22:03 +02:00
Eldad Zack 06613f547a ALSA: usb-audio: clear SUBSTREAM_FLAG_SYNC_EP_STARTED on error
If setting the interface fails, the SUBSTREAM_FLAG_SYNC_EP_STARTED
should be cleared.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-07 11:00:23 +02:00
Eldad Zack 9b7c552bba ALSA: usb-audio: void return type of snd_usb_endpoint_deactivate()
The return value of snd_usb_endpoint_deactivate() is not used,
make the function have no return value.
Update the documentation to reflect what the function is actually
doing.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-07 11:00:03 +02:00
Eldad Zack 239b9f7990 ALSA: usb-audio: don't deactivate URBs on in-use EP
If an endpoint in use, its associated URBs should not be
deactivated.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-07 10:55:14 +02:00
Eldad Zack 26de5d0a8d ALSA: usb-audio: remove deactivate_endpoints()
The only call site for deactivate_endpoints() at snd_usb_hw_free().
The return value is not checked there, as it is irrelevant if it
fails on hw_free.
This patch moves the deactivation of the endpoints directly into
snd_usb_hw_free().

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-07 10:52:13 +02:00
Eldad Zack 9372103990 ALSA: usb-audio: remove unused parameter from sync_ep_set_params
Since the format is not actually used in sync_ep_set_params(),
there is no need to pass it down.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-07 10:52:06 +02:00
Daniel Mack a9d14bc0b1 ALSA: snd-usb-usx2y: remove bogus frame checks
The frame check in i_usX2Y_urb_complete() and
i_usX2Y_usbpcm_urb_complete() is bogus and produces false positives as
described in this LAU thread:

  http://linuxaudio.org/mailarchive/lau/2013/5/20/200177

This patch removes the check code entirely.

Cc: fzu@wemgehoertderstaat.de
Reported-by: Dr Nicholas J Bailey <nicholas.bailey@glasgow.ac.uk>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Mack <zonque@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-02 17:58:01 +02:00
Hannes Gräuler d2724de187 ALSA: snd-usb-caiaq: LED support for Maschine Controller
This patch adds LED support for the Native Instruments Maschine
Controller. It adds ALSA controls for dimming the LEDs of all
buttons and the backlight of the two displays.

Signed-off-by: Hannes Gräuler <hgraeule@uos.de>
Acked-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-30 11:19:16 +02:00
Alan Stern 976b6c064a ALSA: improve buffer size computations for USB PCM audio
This patch changes the way URBs are allocated and their sizes are
determined for PCM playback in the snd-usb-audio driver.  Currently
the driver allocates too few URBs for endpoints that don't use
implicit sync, making underruns more likely to occur.  This may be a
holdover from before I/O delays could be measured accurately; in any
case, it is no longer necessary.

The patch allocates as many URBs as possible, subject to four
limitations:

	The total number of URBs for the endpoint is not allowed to
	exceed MAX_URBS (which the patch increases from 8 to 12).

	The total number of packets per URB is not allowed to exceed
	MAX_PACKS (or MAX_PACKS_HS for high-speed devices), which is
	decreased from 20 to 6.

	The total duration of queued data is not allowed to exceed
	MAX_QUEUE, which is decreased from 24 ms to 18 ms.

	The total number of ALSA frames in the output queue is not
	allowed to exceed the ALSA buffer size.

The last requirement is the hardest to implement.  Currently the
number of URBs needed to fill a buffer cannot be determined in
advance, because a buffer contains a fixed number of frames whereas
the number of frames in an URB varies to match shifts in the device's
clock rate.  To solve this problem, the patch changes the logic for
deciding how many packets an URB should contain.  Rather than using as
many as possible without exceeding an ALSA period boundary, now the
driver uses only as many packets as needed to transfer a predetermined
number of frames.  As a result, unless the device's clock has an
exceedingly variable rate, the number of URBs making up each period
(and hence each buffer) will remain constant.

The overall effect of the patch is that playback works better in
low-latency settings.  The user can still specify values for
frames/period and periods/buffer that exceed the capabilities of the
hardware, of course.  But for values that are within those
capabilities, the performance will be improved.  For example, testing
shows that a high-speed device can handle 32 frames/period and 3
periods/buffer at 48 KHz, whereas the current driver starts to get
glitchy at 64 frames/period and 2 periods/buffer.

A side effect of these changes is that the "nrpacks" module parameter
is no longer used.  The patch removes it.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Clemens Ladisch <clemens@ladisch.de>
Tested-by: Daniel Mack <zonque@gmail.com>
Tested-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-26 10:25:31 +02:00
Peter Senna Tschudin e0f17c75d9 ALSA: Fix assignment of 0/1 to bool variables
Convert 0 to false and 1 to true when assigning values to bool
variables. Inspired by commit 3db1cd5c05.

The simplified semantic patch that find this problem is as
follows (http://coccinelle.lip6.fr/):

@@
bool b;
@@
(
-b = 0
+b = false
|
-b = 1
+b = true
)

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-26 09:57:24 +02:00
Takashi Iwai 68538bf2bc ASoC: Updates for v3.12
- DAPM is now mandatory for CODEC drivers in order to avoid the repeated
   regressions in the special cases for non-DAPM CODECs and make it
   easier to integrate with other components on boards.  All existing
   drivers have had some level of DAPM support added.
 - A lot of cleanups in DAPM plus support for maintaining controls in a
   specific state while a DAPM widget all contributed by Lars-Peter Clausen.
 - Core helpers for bitbanged AC'97 reset from Markus Pargmann.
 - New drivers and support for Analog Devices ADAU1702 and ADAU1401(a),
   Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and WM8904 based
   machines, Freescale S/PDIF and SSI AC'97, Renesas R-Car SoCs, Samsung
   Exynos5420 SoCs, Texas Instruments PCM1681 and PCM1792A and Wolfson
   Microelectronics WM8997.
 - Support for building drivers that can support it cross-platform for
   compile test.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSF0rqAAoJELSic+t+oim9YK0P/0CwP7lAjL87EF+dUKW51raB
 7K8xtOgObec1+Fnc1FEbN6us1hXRkjZJMJyRqa3DO5EaNM5TUoxUa/+MNsKmyGXs
 UhoW7J2TUizxgStxszXdxLEZG5oErxwCtJR3xlIkAq4kcnUI0LwRtGctmguZH74a
 UFxd34tcq8LxytvBp1HaNgaG1OQqIqYUNHYXKCwZZMJRxk8TQU9NfAzlCOtWfPWp
 jjdsBkX6bypWzSV/0P8rdSvjhHlJ1vBw3XTD9jD1/EuC5J7qqKQvwo5Oid98QHiv
 /guV0zx6EPdW5IgyGVvlyc4e5zLrtrckj05Kjyy426mZUpLmGoQCPj+ZAZA+jdqo
 qX3M9lXdisx4FI1Ke+y00G64q9fOuNEyjHKnoMPbZXC7zBTLPC8znncM6Xk5MOx/
 Y+fSChecYzkCrBJqHZGUcMdl0/xL1cRrH6BP2I5ISn5ruEjmTuj3dD0JTUVRi1HM
 KGrLP6TnuY+yBMhoqbGsH7YtNN5NDbqnJrUXQy82GGHH++LlHs/0ljDdOCuwX774
 qu1PsyTwrBvCU9erJS4yTG1KIiFFLTn+exPvUOyjaTFVbs8PoX2NOC4/Ihqj+dvU
 UDj/Lh+/zF2BzrkxN65BwuXULElxjtoFvleWLzt7V8qOCb5LOzBVW8a7f5HQzfU6
 LsEXDtB4VkjGjOGAAsII
 =qzif
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.12

- DAPM is now mandatory for CODEC drivers in order to avoid the repeated
  regressions in the special cases for non-DAPM CODECs and make it
  easier to integrate with other components on boards.  All existing
  drivers have had some level of DAPM support added.
- A lot of cleanups in DAPM plus support for maintaining controls in a
  specific state while a DAPM widget all contributed by Lars-Peter Clausen.
- Core helpers for bitbanged AC'97 reset from Markus Pargmann.
- New drivers and support for Analog Devices ADAU1702 and ADAU1401(a),
  Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and WM8904 based
  machines, Freescale S/PDIF and SSI AC'97, Renesas R-Car SoCs, Samsung
  Exynos5420 SoCs, Texas Instruments PCM1681 and PCM1792A and Wolfson
  Microelectronics WM8997.
- Support for building drivers that can support it cross-platform for
  compile test.
2013-08-23 14:12:22 +02:00
Maksim A. Boyko 140d37de62 ALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam C525
Add the volume control quirk for avoiding the kernel warning
for the Logitech HD Webcam C525
as in the similar commit 36691e1be6
for the Logitech HD Webcam C310.

Reported-by: Maksim Boyko <maksim.a.boyko@gmail.com>
Tested-by: Maksim Boyko <maksim.a.boyko@gmail.com>
Cc: <stable@vger.kernel.org> # 3.10.5+
Signed-off-by: Maksim Boyko <maksim.a.boyko@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-12 14:55:20 +02:00
Clemens Ladisch aa773bfe8f ALSA: usb-audio: fix automatic Roland/Yamaha MIDI detection
Commit aafe77cc45 (ALSA: usb-audio: add support for many Roland/Yamaha
devices) had several logic errors that prevented create_auto_midi_quirk
from enumerating any MIDI ports.

Reported-by: Keith A. Milner <maillist@superlative.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-12 11:42:28 +02:00
Torsten Schenk 4c2aee0032 ALSA: 6fire: make buffers DMA-able (midi)
Patch makes midi output buffer DMA-able by allocating it separately.

Signed-off-by: Torsten Schenk <torsten.schenk@zoho.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-12 11:42:28 +02:00
Torsten Schenk 5ece263f1d ALSA: 6fire: make buffers DMA-able (pcm)
Patch makes pcm buffers DMA-able by allocating each one separately.

Signed-off-by: Torsten Schenk <torsten.schenk@zoho.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-12 11:42:28 +02:00
Andy Shevchenko 663819fb7d ALSA: don't push static constants on stack for %*ph
There is no need to pass constants via stack. The width may be explicitly
specified in the format.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-08 12:04:18 +02:00
Clemens Ladisch 57e6dae108 ALSA: usb-audio: do not trust too-big wMaxPacketSize values
The driver used to assume that the streaming endpoint's wMaxPacketSize
value would be an indication of how much data the endpoint expects or
sends, and compute the number of packets per URB using this value.

However, the Focusrite Scarlett 2i4 declares a value of 1024 bytes,
while only about 88 or 44 bytes are be actually used.  This discrepancy
would result in URBs with far too few packets, which would not work
correctly on the EHCI driver.

To get correct URBs, use wMaxPacketSize only as an upper limit on the
packet size.

Reported-by: James Stone <jamesmstone@gmail.com>
Tested-by: James Stone <jamesmstone@gmail.com>
Cc: <stable@vger.kernel.org> # 2.6.35+
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-08 11:37:34 +02:00
Jussi Kivilinna ddb6b5a964 ALSA: 6fire: fix DMA issues with URB transfer_buffer usage
Patch fixes 6fire not to use stack as URB transfer_buffer. URB buffers need to
be DMA-able, which stack is not. Furthermore, transfer_buffer should not be
allocated as part of larger device structure because DMA coherency issues and
patch fixes this issue too.

Cc: stable@vger.kernel.org
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Tested-by: Torsten Schenk <torsten.schenk@zoho.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-07 16:04:27 +02:00
Eldad Zack e7e58df8ef ALSA: usb-audio: WARN_ON when alts is passed as NULL
Prevent NULL dereference in snd_usb_add_endpoints(), when
alts is passed as NULL. In this case, WARN (since this is
a non-fatal bug) and return NULL ep. Call sites treat a NULL
return value as an error.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:52:27 +02:00
Eldad Zack 88abb8eff4 ALSA: usb-audio: remove implicit_fb from quirk
Since the quirks all apply to implicit feedback (the source endpoint
is always a data endpoint), there's no need to set and check
a flag for it.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:52:14 +02:00
Eldad Zack 914273c714 ALSA: usb-audio: remove is_playback from implicit feedback quirks
An implicit feedback endpoint can only be a capture source. The
consumer (sink) of the implicit feedback endpoint is therefore limited
to playback EPs.
Check if the target endpoint is a playback first and remove redundant
checks.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:51:48 +02:00
Eldad Zack 95fec88332 ALSA: usb-audio: do not initialize and check implicit_fb
Since implicit_fb is not changed, !implicit_fb will always
be true - it is set only after these checks.
Similarly, there's also no need to set it at the top of the function.

Change the type of implicit_fb to bool (more appropriate).

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:51:11 +02:00
Eldad Zack f34d065013 ALSA: usb-audio: reverse condition logic in set_sync_endpoint
Reverse logic on the conditions required to qualify for a sync endpoint
and remove one level of indendation.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:50:15 +02:00
Eldad Zack a60945fd08 ALSA: usb-audio: move implicit fb quirks to separate function
Separate setting implicit feedback quirks from setting
a sync endpoint (which may also be explicit feedback or async).

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:49:21 +02:00
Eldad Zack 71bb64c56d ALSA: usb-audio: separate sync endpoint setting from set_format
Setting the sync endpoint currently takes up about half of set_format().
Move it to a dedicated function.
No functional change.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:48:34 +02:00
Eldad Zack d133f2c22e ALSA: usb-audio: remove assignment from if condition
Following general kernel style.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:48:22 +02:00
Eldad Zack d833cdb10c ALSA: usb-audio: remove disabled debug code in set_format
Code block does not compile when enabled.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:48:12 +02:00
Dan Carpenter 85054b2153 ALSA: usx2y: remove an unneeded check
The test here is always true because S[i].urb is an array not a pointer.
Also it's bogus because the intent was to test:
	if (S->urb[i]) {
instead of:
	if (S[i].urb) {

Anyway, usb_kill_urb() and usb_free_urb() accept NULL pointers so we can
just remove this.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-29 13:59:47 +02:00
Eldad Zack fee4b700a4 ALSA: hiface: return correct XRUN indication
Return SNDRV_PCM_POS_XRUN (snd_pcm_uframes_t) instead of
SNDRV_PCM_STATE_XRUN (snd_pcm_state_t) from the pointer
function of hiface, as expected by snd_pcm_update_hw_ptr0().

Caught by sparse.

Cc: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-24 10:51:37 +02:00
Eldad Zack be2f93a4c4 ALSA: usb-audio: 6fire: return correct XRUN indication
Return SNDRV_PCM_POS_XRUN (snd_pcm_uframes_t) instead of
SNDRV_PCM_STATE_XRUN (snd_pcm_state_t) from the pointer
function of 6fire, as expected by snd_pcm_update_hw_ptr0().

Caught by sparse.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-21 11:55:22 +02:00
Takashi Iwai 5be1efb4c2 ALSA: usx2y: Fix unlocked snd_pcm_stop() call
snd_pcm_stop() must be called in the PCM substream lock context.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-15 21:25:13 +02:00
Takashi Iwai 9538aa46c2 ALSA: ua101: Fix unlocked snd_pcm_stop() call
snd_pcm_stop() must be called in the PCM substream lock context.

Cc: <stable@vger.kernel.org>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-15 21:24:57 +02:00
Takashi Iwai 5b9ab3f732 ALSA: 6fire: Fix unlocked snd_pcm_stop() call
snd_pcm_stop() must be called in the PCM substream lock context.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-15 18:12:50 +02:00
Eldad Zack 42d4ab832d ALSA: usb-audio: fix regression for fixed stream quirk
Commit 8f898e92ae removed the redundant
reads of bInterfaceProtocol from the descriptors, but introduced a
regression to devices with quirks of type QUIRK_AUDIO_FIXED_ENDPOINT,
since fp->protocol is not set in setup process.

As a consequence, audio streams would not get initialized, as the
following logs show:

[   48.923043] setting usb interface 3:1
[   48.923056] Creating new capture data endpoint #81
[   48.923484] 4:3:1: cannot set freq 48000 to ep 0x81

This patch sets fp->protocol in create_fixed_stream_quirk() and
resolves the regression.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-10 17:52:14 +02:00
Przemek Rudy 066624c6a1 ALSA: usb-audio: Add Audio Advantage Micro II
This patch is adding extensive support (beside standard usb audio class)
for Audio Advantage Micro II usb sound card.
Features included:
- Access to AES bits (so now sending the IEC61937 compliant stream is
possible).
- Mixer SPDIF control added to turn on/off the optical transmitter.

Signed-off-by: Przemek Rudy <prudy1@o2.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-28 13:37:12 +02:00
Takashi Iwai ea70ee057c Merge branch 'full-roland-support' of git://git.alsa-project.org/alsa-kprivate into for-next
For adding support for many Roland and Yamaha devices:
* 'full-roland-support' of git://git.alsa-project.org/alsa-kprivate:
  ALSA: usb-audio: add quirks for Roland QUAD/OCTO-CAPTURE
  ALSA: usb-audio: claim autodetected PCM interfaces all at once
  ALSA: usb-audio: remove superfluous Roland quirks
  ALSA: usb-audio: add MIDI port names for some Roland devices
  ALSA: usb-audio: add support for many Roland/Yamaha devices
  ALSA: usb-audio: detect implicit feedback on Roland devices
  ALSA: usb-audio: store protocol version in struct audioformat
2013-06-28 12:13:26 +02:00
Clemens Ladisch b7f33917bc ALSA: usb-audio: add quirks for Roland QUAD/OCTO-CAPTURE
The Roland Quad/Octo-Capture devices use some unknown vendor-specific
mechanism to switch sample rates (and to manage other controls).  To
prevent the driver from attempting to use any other than the default
44.1 kHz sample rate, use quirks to hide the other alternate settings.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-06-27 21:59:50 +02:00